VIESMANN VITOLADENS 300-C Oil condensing boilers 12.9 to 28.9 kw

Transcription

1 VISMANN VITOLADNS 00-C Oil condensing boilers 12.9 to 28.9 kw Datasheet Part no. and prices: see pricelist VITOLADNS 00-C Type BC Oil condensing boiler With two-stage Compact blue flame burner (12.9 to 28.9 kw). Suitable for open and balanced flue operation with fuel oil DIN L standard, low sulphur fuel oil DIN L and fuel oil DIN L A Bio 10: Suitable for low sulphur fuel oil L with up to 10 % biocomponents (AM). 5/2012

2 Vitoladens 00-C, type BC The Vitoladens 00-C is a highly efficient oil condensing boiler that offers great flexibility in terms of application. Particularly compact, it is suitable both for use in new build and as a replacement for old boilers. At the core of this condensing boiler lies a corrosion-resistant stainless steel Inox-Radial heat exchanger. In direct connection with the biferral composite heating surface, the energy input is efficiently converted to heat practically without losses. The extremely economical use of valuable fuel oil also results in a reduction in CO 2 emissions. This means that by operating the Vitoladens 00-C, you are personally contributing towards active climate protection. The design and characteristics of the stainless steel heat exchanger encourage the condensation of hot gases. The condensate created flushes the heating surface and produces a self-cleaning effect, which ensures a permanently high efficiency of 98 %. Longer maintenance intervals and therefore lower service costs save you money. The two-stage Compact blue flame burner in the Vitoladens 00-C matches its output to the current heat demand, it is also very economical and efficient. The burner operates in balanced or open flue mode, thus allowing flexible siting of this oil condensing boiler. The Vitoladens 00-C has already won the red dot design award. All connections of the Vitoladens 00-C are at the top. It is pre-fitted at the factory, and takes little time to install on site. A combination with the Vitocell 00-H DHW cylinder is ideal, to form a single unit with the Vitoladens 00-C. If there is a legal requirement to install a neutralising system at the boiler site, there is plenty of space to do so in the boiler plinth. A Safety assembly included in standard delivery B lue outlet and ventilation air inlet at the top C Vitotronic control unit D Integral silencer Integral stainless steel Inox-Radial heat exchanger Biferral composite heating surface G Two-stage Compact blue flame burner Standard seasonal efficiency [to DIN] up to 98 % (H s) [gross cv] / 104 % (H i) [net cv] Highly efficient energy utilisation on a minimal footprint Biferral composite heating surface with directly linked stainless steel Inox-Radial heat exchanger Two-stage Compact blue flame burner for open flue and balanced flue operation Quiet operation thanks to integral silencer asy to operate Vitotronic 200 control unit with plain text and graphic display All commercially available L-type fuel oils can be used. Also suitable for fuel oil DIN L A Bio 10: Low sulphur fuel oil L with up to 10 % biocomponents (AM) Optional space saving installation of neutralising system inside the boiler plinth Safety assembly included in standard delivery asier handling and extended transport accessories Test winner with the "Stiftung Warentest" [German Consumer Association] 05/ VISMANN VITOLADNS 00-C

3 Specification Rated heating output with two-stage Compact blue flame burner T /T R = 50/0 C kw 12.9/ / /28.9 T /T R = 80/60 C kw 12/18 15/22 18/27 Rated heat input kw 12.5/ / /28.1 with two-stage Compact blue flame burner Product ID C-005BS104 Dimensions Total length (dim. c) mm Total width mm Total height (in operation) mm Height (control unit in operating position) mm Plinth height mm Height of DHW cylinder below the boiler Capacity 10 to 200 l mm Total weight kg Boiler with thermal insulation, burner and boiler control unit Power consumption *1-100 % of rated heating output W % of rated heating output W Appliance in standby mode W Content boiler water (boiler and heat exchanger) l Permiss. operating pressure bar MPa 0. Boiler connections Boiler flow and return lat gaskets G 1½ 1½ 1½ With threaded inserts supplied Rp Safety connection (safety valve) G ¾ ¾ ¾ Drain outlet R ½ ½ ½ Condensate drain/connection Ø mm lue gas parameters Temperature at 0 C return temperature C at 60 C return temperature C Mass flow rate for fuel oil L kg/h Standard seasonal efficiency [to % up to 98 (H s ) [gross cv] / 104 (H i ) [net cv] DIN] at heating system temp. 50/0 C lue outlet Ø mm Ventilation air connection Ø mm Available draught Pa mbar Sound power level (to N ISO ) in balanced flue operation db(a) 55 to to to 60 in open flue operation db(a) 59 to to to *1 Standard parameter VITOLADNS 00-C VISMANN

4 Specification (cont.) M 80 A KR B KR D 22 C G L KOA1 K b c a KOA KOA1 H A B C D G H Air vent valve Safety valve ( bar or 0. MPa) Connection for diaphragm expansion vessel ill valve Ventilation air connection lue outlet ixing apertures for mounting the transport aid (accessory) Condensate supply (with neutralising system positioned inside the plinth) K Plinth L Siphon M Safety equipment block Drain valve KOA1 Condensate drain KOA2 Condensate drain (with neutralising system positioned inside the plinth) KR Boiler return Boiler flow 4 VISMANN VITOLADNS 00-C

5 e f g h d Specification (cont.) KR KR M Vitocell 100-H or Vitocell 00-H KR Boiler return Boiler flow M Ventilation air connection lue outlet Dimensions Rated heating output (T /T R =50/0 C) kw 12.9/ / /28.9 a mm b mm c mm With DHW cylinder below the boiler l 10 to to to 200 d mm e mm f mm g mm h mm VITOLADNS 00-C VISMANN 5

6 Specification (cont.) Pressure drop on the heating water side 00 0 The Vitoladens 00-C is only suitable for fully pumped hot water heating systems Pressure drop mbar kpa low rate in m³/h Minimum clearances A Combustion chamber (required space for removal during maintenance) B Boiler C DHW cylinder (if installed) Subject to technical modifications. Viessmann Werke GmbH&Co KG D-5107 Allendorf Telephone: ax: Viessmann Limited Hortonwood 0, Telford Shropshire, T1 7YP, GB Telephone: ax: mail: info-uk@viessmann.com 6 VISMANN VITOLADNS 00-C