Short Questions with Answers APPLIED THERMODYNAMICS(5 TH MECHANICAL) Chapter No-1
|
|
- Edith Owen
- 5 years ago
- Views:
Transcription
1 Short Questions with Answers APPLIED THERMODYNAMICS(5 TH MECHANICAL) Chapter No-1 1. Define mechanical efficiency in case of an IC engine? [2015w] Ans. Mechanical efficiency of an I.C. engine is defined as the ratio of brake power and indicated power. BP mech FP 2. Define brake specific fuel consumption. Ans. Brake specific fuel consumption is defined as the ratio of the mass of fuel consumed per hour per unit mf power output. bsfc BP 3. Define volumetric efficiency of an I.C Engine. Ans. Volumetric efficiency of an I.C. engine is defined as the ratio between volume of actual charge inducted into the cylinder and the volume of charge corresponding to the swept volume. Vol Vactual V 4. What is meant by I.P and B.P. Ans. I. P Indicated power B. P. Brake power s IP is defined as the rate of work done on the piston by burning of charge inside the cylinder. B. P. is the net power available at the engine shaft for external use. 5. Define calorific value of fuel? Ans. Calorific value of fuel is defined as the amount of heat energy liberated by complete combustion of unit mass of a fuel. 6. Define air-standard efficiency of an I.C Engine. Ans. Air standard efficiency is defined as the thermal efficiency of the internal combustion engine while working under appropriate air-standard cycles 7. Define mean effective pressure. Ans. Mean effective pressure is defined as the ratio between net work and the swept volume of the cycle. 8. A rope- brake dynamometer was used to measure the brake power of a single cylinder, 4-stroke cycle petrol engine. It was found that the torque due to brake load was 175Nm and the engine makes 500 rpm. Determine the brake power developed by the engine. [Ex. 24.1, M. Rathore] Ans. Given, K=1, T=175Nm, N=500rpm BP = 2NT 2x500x KW 60,000 60,000 {50}
2 Chapter No 2 1 Write advantages of multistage compressor? [2016s] Ans. Advantages of multistage compressor 1) Gas can be compressed to a sufficiently high pressure. 2) It improves volumetric efficiency of each cylinder. 2. Classify the Air Compressor. Ans. Classification of air compressor Compressor Positive displacement type Dynamic Compressor Reciprocating Rotary Centrifugal Axial Single acting Double Root Vane Acting Blower type 3. Mention 4 industrial usage of compressed air? [2015w] Ans. 1. Air refrigeration 2. Driving pneumatic tools 3. Cleaning purposes. 4. Starting of heavy-duty diesel engines. 4. State the main parts of reciprocating air compressor. Ans. Main parts of reciprocating air compressor use cylinder, piston, connecting rod, crank, inlet and delivery valves. 5. Define FAD. Ans. It is the volume of compressed air corresponding to atmospheric conditions. 6. Why is the clearance volume provided in each reciprocating compressor? Ans. In reciprocating compressor, clearance volume is provided. i) to avoid piston striking cylinder head. ii) To let the valves freely actuate inside the cylinder. 7. What is the use of intercooler in a 2-stage air compressor? Ans. The use of intercooler is to cool the compressed air from the first stage compressor. 8 Define volumetric efficiency of a reciprocating compressor. Ans. Volumetric efficiency of a reciprocating compressor is defined as the ratio of actual volume of air sucked into the compressor and the piston-displacement volume. 9. What do you mean by air compressor? Ans. Air compressor is a machine which compresses atmospheric air with the help of mechanical energy to a high pressure. {51}
3 Chapter - 3 Name of the Chapter: Refrigeration 1. Define tone of refrigeration. [2016s] Ans. It is defined as the amount of heat required for uniform melting of 1 ton of ice from and at 0ºC in 24 hours. 2. State properties of a good refrigerant [2016S] Ans. Properties of a good refrigerant 1) High critical temperature 2) Low boiling print 3) High latent heat of vaporization 4) Non-flammable, Non-toxic 3. What do you mean by refrigeration? [2015w] Ans. Refrigeration is the process of continuous removal of heat from a system to keep its temperature below that of the surrounding. 4. What are the chemical formula of refrigerants R-11, R-12, R-21 and R-22 [2015w] Ans. Refrigerant R-11 C Cl 3 F R-12 CCl 2 F 2 R-21 CHCl 2 F R-22 CHClF 2 Chemical Formula 5. Name the refrigerant commonly used in domestic refrigerator. Ans. Refrigerant commonly used in domestic refrigerator are R-12, R-134a 6. Define refrigerant. Ans. Refrigerant is a heat carrying medium which transfers heat from a low temperature system to a high temperature surrounding. 7. List out the components of vapour compression refrigeration system. Ans. Components of vapour compression refrigeration system are compressor, condenser, expansion valve, evaporator. 8. Define COP. Ans. Cop is defined as the ratio of refrigerating effect to work done in compressor. 9. Write down the properties of R-12. Ans. i) It is non-toxic, non-corrosive, non-irritating non-flammable. ii) It has relatively low latent heat valve. 10. State two advantages of vapour absorption system over vapour compression system. Ans. Two advantages are 1) Less noisy 2) It uses low grade energy. So, waste heat can be utilized. 11. State the function of an analyzer in a vapour absorption refrigeration system. Ans. Analyzer is used to remove water vapour from ammonia vapour leaving the generator. {52}
4 12. What is the function of rectifier of a vapour absorption refrigeration system. Ans. Rectifier is used to further check for the water vapour which is not removed in analyzer. 13. Draw the flow diagram of simple vapour absorption system Ans. Chapter - 4 Name of the Chapter : Psychrometry 1 Define psychrometry. [2015w] Ans. Psychrometry is defined as the study of properties & behavior of moist air. 2 What is saturated air? Ans. Saturated air is the condition of air when it has dissolved maximum amount of water vapour into it. 3 Define relative humidity [2016s] Ans. It is the ratio between actual mass of water vapour present in air and the mass of water vapour present in saturated air at same temperature and pressure. 4 Define specific humidity or humidity ratio. Ans. It is the ratio between mass of water vapour to the mass of dry air in a given mass of moist air. 5 Define dew Pt. temperature. Ans. It is defined as the temperature at which atmospheric water vapour starts to condense. 6 What is the difference between dry bulb temperature and wet bulb temperature? [2016s] Ans. Dry bulb temperature is the temperature of air when it is not affected by temp. of air when it is affected by moisture. 7 What is the function of Psychrometer? Ans. Psychrometre is an instrument used to measure the dry bulb temperature and wet bulb temperature of air. 8 Define sensible heat Ans. Sensible heat is defined as the heat which causes rise or fall in temperature of a body. 9 What is by-pass factor? Ans. It is defined as the fraction of air which doesn t come in contact with heating or cooling coil. 10 What is ADP? Ans. ADP is defined as surface temperature of cooling coil. 11. What is humid specific heat? Ans. It is the specific heat of the mixture of dry air & water vapour. {53}
5 Chapter - 5 Name of the Chapter: Physiological Factors 1. What is effective Temp? [2016s] Ans. Effective temperature is a measure of feeling warmth or cold to the human 2. What is optimum effective temperature? Ans. It is the effective temperature at which majority of the people feel comportable. 3. Define comfort. [2016s] Ans. Human comfort is that condition of mind, which expresses satisfaction with the thermal environment. 4. What is comfort chart? Ans. It is a graphical representation showing the effective temperatures &number of people feeling comfortable at various effective temperature. 5. Define sensible heat. Ans. Sensible heat is the heat which causes a rise or fall is temperature of a body. 6. What factors are taken care of in any air-conditioning system? Ans. The factors to be taken care of is air-condition system are Oxygen supply, carbon dioxide removal, Body heat & moisture removal, Infiltration heat Chapter - 6 Name of the Chapter: Air Conditioning System 1. State why ducts are used in air conditioning system. Ans. Ducts are used to transmit conditioned air from a/c equipment to different parts of the room. 2. What is the use of air filter and blower in air conditioning system? [2015w] Ans. Air filter removes dirt, smoke, bacteria from entering air blower is used to circulate air over the evaporator coil. 3. What do you understand by static & velocity pressure in a duct? Ans. Static pressure : -It s the pressure that exists in a duct system always which is independent of movement. Velocity Pressure :- It is the drop is static pressure necessary to produce a given velocity of flow. 4. What is the function of a fan in an air-conditioning system? Ans. Fan is used to circulate atmospheric air over the condenser coil which removes heat from refrigerant. 5. Classify Air conditioning system. Ans. Based on arrangement of equipments, 1. Summer a/c, 2.Window a/c Based on psychrometric processes involved, 1. Summer a/c 2. Winter a/c 3. Year round a/c Based on number of outlets, 1. Unitary a/c 2. Central a/c {54}
R10. IV B.Tech I Semester Regular/Supplementary Examinations, Nov/Dec REFRIGERATION & AIR-CONDITIONING (Mechanical Engineering)
Set No. 1 IV B.Tech I Semester Regular/Supplementary Examinations, Nov/Dec - 2014 REFRIGERATION & AIR-CONDITIONING (Mechanical Engineering) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions
More informationMath. The latent heat of fusion for water is 144 BTU s Per Lb. The latent heat of vaporization for water is 970 Btu s per Lb.
HVAC Math The latent heat of fusion for water is 144 BTU s Per Lb. The latent heat of vaporization for water is 970 Btu s per Lb. Math F. to C. Conversion = (f-32)*(5/9) C. to F. Conversion = C * 9/5 +
More informationREFRIGERATION AND AIR CONDITIONING
REFRIGERATION AND AIR CONDITIONING SECOND EDITION S.N. Sapali Professor of Mechanical Engineering College of Engineering, Pune Delhi-110092 2014 REFRIGERATION AND AIR CONDITIONING, Second Edition S.N.
More informationDhulapally, Secunderabad Subject: REFRIGERATION AND AIR CONDITIONING QUESTION BANK
St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: REFRIGERATION AND AIR CONDITIONING Class : ECE III 1 Define Unit of refrigeration. 2 Define C.O.P. QUESTION BANK 3 What is the
More informationInstitute of Aeronautical Engineering (Autonomous) Dundigal, Hyderabad B.Tech (III II SEM) MECHANICAL ENGINEERING
Institute of Aeronautical Engineering (Autonomous) Dundigal, Hyderabad- 500 043 B.Tech (III II SEM) MECHANICAL ENGINEERING REFRIGERATION AND AIR CONDITIONING Prepared by, Dr. CH V K N S N Moorthy, Professor
More informationR07. Answer any FIVE Questions All Questions carry equal marks *****
Set No: 1 III B.Tech. II Semester Supplementary Examinations, April/May 2013 REFRIGERATION AND AIR CONDITIONING (Mechanical Engineering) Time: 3 Hours Max Marks: 80 Answer any FIVE Questions All Questions
More informationBasic Principals of Air conditioning By Dr. Esam Mejbil Abed
REPUBLIC OF IRAQ Ministry of Higher Education & Scientific Research University of Babylon College of Engineering Mechanical Engineering Department Basic Principals of Air conditioning By Dr. Esam Mejbil
More informationHomework Chapter2. Homework Chapter3
Homework Chapter2 2/1 A storage tank holds methane at 120 K, with a quality of 25 %, and it warms up by 5 C per hour due to a failure in the refrigeration system. How long time will it take before the
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road AUTONOMOUS QUESTION BANK (DESCRIPTIVE) UNIT I
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 AUTONOMOUS QUESTION BANK (DESCRIPTIVE) Subject with Code : Refrigeration and Air Conditioning (16ME8806) Course & Branch:
More information: REFRIGERATION & AIR CONDITIONING COURSE CODE : 6023 COURSE CATEGORY : A PERIODS/ WEEK : 6 PERIODS/ SEMESTER : 90 CREDIT : 6 TIME SCHEDULE
COURSE TITLE : REFRIGERATION & AIR CONDITIONING COURSE CODE : 6023 COURSE CATEGORY : A PERIODS/ WEEK : 6 PERIODS/ SEMESTER : 90 CREDIT : 6 TIME SCHEDULE MODULE TOPIC PERIODS 1 Introduction. Applications
More information3. (a) Explain the working of a rotary screw compressor. [10] (b) How the capacity control is achieved in refrigerant compressor?
Code No: RR410305 Set No. 1 IV B.Tech I Semester Regular Examinations, November 2006 REFRIGERATION & AIR CONDITIONING (Mechanical Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All
More informations. Properties for R134a are as follows : Saturated R-134a Superheated R-134a
CHAPTER 9 REFRIGERATION & AIR-CONDITIONING YEAR 2012 ONE MARK Common Data For Q. 1 and Q.2 A refrigerator operates between 120 kpa and 800 kpa in an ideal vapour compression cycle with R-134a as the refrigerant.
More informationIV SEMESTER DIPLOMA EXAMINATION, JANUARY-2013 THERMODYNAMICS
AE401,ME401,DAE19,DME19 IV SEMESTER DIPLOMA EXAMINATION, JANUARY-2013 THERMODYNAMICS Time: 3 Hours Max. Marks: 75 GROUP A : Answer any three questions. (Question No. 1 is compulsory) Q.1 Write a short
More informationFS 231: Final Exam (5-6-05) Part A (Closed Book): 60 points
Name: Start time: End time: FS 231: Final Exam (5-6-05) Part A (Closed Book): 60 points 1. What are the units of the following quantities? (10 points) a. Enthalpy of a refrigerant b. Dryness fraction of
More informationRefrigeration and Air Conditioning
Refrigeration and Air Conditioning Objectives of the lesson: 1. Define refrigeration and air conditioning 2. Introduce aspects of various natural refrigeration methods, namely: Use of ice transported from
More information2. CURRICULUM. Sl. No.
. CURRICULUM Sl. No. Code Title No. of Lecture Hours 1 RAC 001 Fundamentals of Refrigeration and Air 60 conditioning RAC 00 Psychrometry, Heat load Estimation for 70 Air conditioning and Refrigeration
More informationINSTITUTE OF AERONAUTICAL ENGINEERING
1 P a g e INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -00 043 MECHANICAL ENGINEERING QUESTION BANK Name : REFRIGERATION AND AIR CONDITIONING Code : A60334 Class : III B. Tech
More informationSection 1: Theory of Heat Unit 3: Refrigeration and Refrigerants
Section 1: Theory of Heat Unit 3: Refrigeration and Refrigerants Unit Objectives After studying this chapter, you should be able to: Discuss applications for high-, medium-, and low temperature refrigeration.
More informationRSES Technical Institute Training Manual 1 70 hours, 70 NATE CEHs, 7.2 CEUs
Lesson 1 - Introduction to Refrigeration and Air Conditioning Define refrigeration. Identify the basic components of a refrigeration cycle. Identify the various gas laws and their importance to a basic
More informationLISTOF EXPERIMENTS. S. No. NAME OF EXPERIMENTS PAGE No.
LISTOF EXPERIMENTS S. No. NAME OF EXPERIMENTS PAGE No. 1. To study refrigeration cyc;e, determine of coefficient of performance of cycle & determine of tonnage capacity of refrigeration unit. 2. To determine
More informationRefrigeration and Air Conditioning
Refrigeration and Air Conditioning 1. Pick up the wrong statement. A refrigerant should have (a) Tow specific heat of liquid (b) high boiling point (c) high latent heat of vaporisation (d) higher critical
More informationMechanical Engineering Laboratory
Mechanical Engineering Laboratory MEE 416 Professor H. Ezzat Khalifa Syracuse University http://lcs.syr.edu/faculty/khalifa/mee416/ MEE416 1 A. Experiment 1 Air-Conditioning: Air-side Experiment 0031 Link
More informationPaper No. : 04 Paper Title : Unit Operations in Food processing Module 11 : Principles of Refrigeration
Paper No. : 04 Paper Title : Unit Operations in Food processing Module 11 : Principles of Refrigeration 11.1 Introduction Preservation of foods is a vital processing step in food processing. There are
More informationEvaluation of Available Heat at the Exhaust of Automotive Engine for Air Conditioning by Vapor Absorption System
Evaluation of Available Heat at the Exhaust of Automotive Engine for Air Conditioning by Vapor Absorption System Kautuk Sharma 1, Devendra singh Sikarwar 2 1 Research scholar, Mechanical Engineering Department,
More informationRefrigeration Cycles MOHAMMAD FAISAL HAIDER. Bangladesh University of Engineering and Technology
Refrigeration Cycles MOHAMMAD FAISAL HAIDER LECTURER Department of Mechanical Engineering Department of Mechanical Engineering Bangladesh University of Engineering and Technology Objectives Introduce the
More informationSIR C.R.REDDY COLLEGE OF ENGINEERING, ELURU DEPARTMENT OF MECHANICAL ENGINEERING ETD-II. Model Short Answer Questions And Answers
SIR C.R.REDDY COLLEGE OF ENGINEERING, ELURU DEPARTMENT OF MECHANICAL ENGINEERING ETD-II Model Short Answer Questions And Answers VAPOUR POWER CYCLES 1. What are the methods to increase thermal efficiency
More informationUNIT 1 AIR CONDITIONING 1. Write the various psychometric processes? Explain any four processes with neat sketches?
SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR (AUTONOMOUS) (Approved by AICTE, New Delhi & Affiliated to JNTUA, Anantapuramu) (Accredited by NBA & Accredited by NAAC with A Grade) (An ISO 9001:2008
More informationRefrigeration Systems
Refrigeration Systems COP COP = coefficient of performance Air conditioners, refrigerators: COP=QL/Wnet Heat pumps: COP=QH/Wnet Energy balance: Wnet+QL=QH From Cengel, Thermodynamics: An Engineering Approach,
More informationFor an ideal gas mixture, Dalton s law states that the sum of the partial pressures of the individual components is equal to the total pressure.
1 PSYCHROMETICS Psychrometry is the study of the characteristics of moist air. We will see soon that evaporation of moisture from the skin can have a significant impact on thermal comfort. The rate of
More informationRAC. Unit 1. Previous year Questions
RAC Unit 1 Previous year Questions 1.What is the basic difference between open and closed Air refrigeration cycles? Describe a Bellcoleman or Reversed Joule air refrigeration cycle with the help of a neat
More informationThermodynamic Calculations of Two-Stage Vapor Compression Refrigeration Cycle with Flash Chamber and Separate Vapor Mixing Intercooler
Thermodynamic Calculations of Two-Stage Vapor Compression Refrigeration Cycle with Flash Chamber and Separate Vapor Mixing Intercooler Author: Volodymyr Voloshchuk Vl.volodya@gmail.com Introduction In
More informationChapter 14, Problem 27.
Chapter 14, Problem 27. A house contains air at 25 C and 65 percent relative humidity. Will any moisture condense on the inner surfaces of the windows when the temperature of the window drops to 10 C?
More informationChapter-8 Capacity Control of Refrigeration Systems
Chapter-8 Capacity Control of Refrigeration Systems Chapter-8 Capacity Control of Refrigeration Systems ၈.၁ Compressor Control Chiller Control and Chilled Water Plant Control Refrigeration system control
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 Background The science which deals with creating a controlled climate in indoor space is called air conditioning. Earlier days the air-conditioning was treated as a luxury,
More informationUNIT-1 Q.1 Draw P-V and T-s diagram of Reversed Carnot cycle (2M-Apr./May-2009) Q.2 Define Ton of refrigeration and COP. (2M- Nov/Dec-2009)
UNIT-1 Q.1 Draw P-V and T-s diagram of Reversed Carnot cycle (2M-Apr./May-2009) Q.2 Define Ton of refrigeration and COP. (2M- Nov/Dec-2009) (2M-Apr./May-2011) Q.3 Differentiate between heat engine and
More informationThermodynamics II Chapter 6 Mixtures & Psychrometry
Thermodynamics II Chapter 6 Mixtures & Psychrometry Mohsin Mohd Sies Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia Objectives Differentiate between dry air and atmospheric air. Define and
More informationUNIT - 3 Refrigeration and Air - Conditioning
UNIT - 3 Refrigeration and Air - Conditioning Science of providing and maintaining temperatures below that of surroundings I n t r o d u c t i o n t o R e f r i g e r a t i o n The term refrigeration may
More informationExperiment 2: Test on Domestic Refrigerator for evaluation of EER.
Experiment 2: Test on Domestic Refrigerator for evaluation of EER. Specifications of Domestic Refrigerator: Model: Videocon refrigerator (single door) Capacity: 150 lit. Compressor: Hermetically Sealed
More informationPressure Enthalpy Charts
Pressure Enthalpy Charts What is a p-h Diagram? A p-h diagram is a diagram with a vertical axis of absolute pressure and a horizontal axis of specific enthalpy. "Enthalpy is the amount of energy in a substance
More informationChapter 9. Refrigeration and Liquefaction
Chapter 9 Refrigeration and Liquefaction Refrigeration is best known for its use in the air conditioning of buildings and in the treatment, transportation, and preservation of foods and beverages. It also
More informationME 410 MECHANICAL ENGINEERING SYSTEMS LABORATORY MASS & ENERGY BALANCES IN PSYCHROMETRIC PROCESSES EXPERIMENT 3
ME 410 MECHANICAL ENGINEERING SYSTEMS LABORATORY MASS & ENERGY BALANCES IN PSYCHROMETRIC PROCESSES EXPERIMENT 3 1. OBJECTIVE The objective of this experiment is to observe four basic psychrometric processes
More informationSYLLABUS. osmania university CHAPTER - 1 : LAWS OF THERMODYNAMICS CHAPTER - 3 : HEAT EXCHANGER CHAPTER - 4 : REFRIGERATION SYSTEM
Contents i SYLLABUS osmania university UNIT - I CHAPTER - 1 : LAWS OF THERMODYNAMICS Steady Flow Energy Equation, Conditions of Reversible and Irreversible Processes. CHAPTER - 2 : HEAT TRANSFER Modes
More informationTeaching and Examination Scheme PAPER HRS TH PR OR TW TOTAL TH TU PR
Course Name : Diploma in Mechanical Engineering Course Code : ME/MH/MI Semester : Sixth for ME and Seventh for MH/MI Subject Title : (Elective) Subject Code : 17612 Teaching and Examination Scheme Teaching
More informationPurpose of Refrigeration
Refrigeration Outline Purpose of refrigeration Examples and applications Choice of coolant and refrigerants Phase diagram of water and CO 2 Vapor compression refrigeration system Pressure-enthalpy diagram
More informationPRESSURE-ENTHALPY CHARTS AND THEIR USE By: Dr. Ralph C. Downing E.I. du Pont de Nemours & Co., Inc. Freon Products Division
INTRODUCTION PRESSURE-ENTHALPY CHARTS AND THEIR USE The refrigerant in a refrigeration system, regardless of type, is present in two different states. It is present as liquid and as vapor (or gas). During
More informationUse this Construction/HVAC Glossary to answer the questions below.
www.garyklinka.com Page 1 of 21 Instructions: 1. Print these pages. 2. Circle the correct answers and transfer to the answer sheet on the second last page. 3. Page down to the last page for the verification
More informationwe will examine only the vapour compression systems transfers to the Carnot cycle can serve as the initial model of the ideal refrigeration cycle.
Refrigeration Cycle Reading Problems 10-1 10-5, 10-7, 10-9 10-11, 10-14, 10-39 Definitions a refrigeration system removes thermal energy from a low-temperature region and transfers heat to a high-temperature
More informationSession: HVAC 101 HVAC 101. Steve Sain Sain Engineering Associates, Inc. August 9, Rhode Island Convention Center Providence, Rhode Island
Session: HVAC 101 HVAC 101 Steve Sain Sain Engineering Associates, Inc. August 9, 2016 Rhode Island Convention Center Providence, Rhode Island Why? 2 Acknowledgements 3 Disclaimer I m gonna shoot down
More informationRefrigeration Technology in Building Services Engineering
Unit 70: Unit code: T/600/0459 QCF Level: 3 Credit value: 10 Guided learning hours: 60 Unit aim Refrigeration Technology in Building Services Engineering This unit develops an understanding of the principles,
More informationAND AIR-CONDITIONING. Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University
Chapter 14 GAS VAPOR MIXTURES AND AIR-CONDITIONING Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University 2 Objectives Differentiate between dry air and atmospheric air. Define and calculate
More informationPsychrometrics. Outline. Psychrometrics. What is psychrometrics? Psychrometrics in daily life and food industry Psychrometric chart
Psychrometrics Outline What is psychrometrics? Psychrometrics in daily life and food industry Psychrometric chart Dry bulb temperature, wet bulb temperature, absolute humidity, relative humidity, specific
More informationREFRIGERATION TUTOR. OBJECTIVE: To perform test on the refrigeration tutor to determine different COPs and other performance parameters.
REFRIGERATION TUTOR OBJECTIVE: To perform test on the refrigeration tutor to determine different COPs and other performance parameters. EXPERIMENTAL SETUP: All the components of refrigeration bench are
More informationPractical Fundamentals of Heating, Ventilation and Air Conditioning (HVAC) for Engineers and Technicians
Presents Practical Fundamentals of Heating, Ventilation and Air Conditioning (HVAC) for Engineers and Technicians Revision 11.2 Website: www.idc-online.com E-mail: idc@idc-online.com IDC Technologies Pty
More informationCarnot. 2. (a) Discuss the advantages of the dense air refrigeration system over an open air refrigeration system?
UNIT-1 1. What is the difference between a refrigerator and heat pump? Derive an expression for the cop for both if they are running on reversed Carnot cycle? The above figure shows the objectives of refrigerators
More informationpdfmachine trial version
HVAC PROBLEM SHEET # 02(REVERSED BRAYTON CYCLE) 1. 500 kg of atmospheric air is circulated per hour in an open type of refrigeration installation. The air is drawn from the cold chamber at temperature
More informationAir Conditioning Clinic. Absorption Water Chillers One of the Equipment Series TRG-TRC011-EN
Air Conditioning Clinic Absorption Water Chillers One of the Equipment Series TRG-TRC011-EN Absorption Water Chillers One of the Equipment Series A publication of The Trane Company Worldwide Applied Systems
More information(Refer Slide Time: 00:00:40 min)
Refrigeration and Air Conditioning Prof. M. Ramgopal Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture No. # 10 Vapour Compression Refrigeration Systems (Refer Slide
More informationADVANCES in NATURAL and APPLIED SCIENCES
ADVANCES in NATURAL and APPLIED SCIENCES ISSN: 995-77 Published BY AENSI Publication EISSN: 998-9 http://www.aensiweb.com/anas 6 Special (6): pages 94- Open Access Journal Performance analysis of refrigeration
More informationS.A. Klein and G.F. Nellis Cambridge University Press, 2011
12.A-1 A mixture of helium and water vapor is flowing through a pipe at T= 90 C and P = 150 kpa. The mole fraction of helium is y He = 0.80. a.) What is the relative humidity of the mixture? b.) What is
More informationRefrigeration & Air-Conditioning. Author. Dr. A. G. Bhadaniya. Head, Dairy Engineering Department, Anand Agriculture University, Anand
Refrigeration & Air-Conditioning Author Dr. A. G. Bhadaniya Head, Dairy Engineering Department, Anand Agriculture University, Anand Dr. S. Ravi Kumar Head, Dairy Engineering, Sri Venkateswara Veterinary
More informationHVAC Systems What the Rater Needs to Know in the Field CALCS-PLUS
HVAC Systems What the Rater Needs to Know in the Field This presentation used CASE* studies from the following *CASE Copy And Steal Everything HVAC Systems - What the Rater Needs to Know in the Field This
More informationStandard for 2006 Performance Rating Of Positive Displacement Ammonia Compressors and Compressor Units
ANSI/AHRI Standard 510-2006 (Formerly ARI Standard 510-2006) Standard for 2006 Performance Rating Of Positive Displacement Ammonia Compressors and Compressor Units Price $10.00 (M) $20.00 (NM) Printed
More informationAir Conditioning Components
Air Conditioning Components Agenda AC Components Compressor & Clutch Condenser Receiver-drier or Accumulator Expansion Valve or Orifice Tube Evaporator Compressor 2 primary purposes Increase pressure &
More informationTopic 2. ME 414/514 HVAC Systems Overview Topic 2. Equipment. Outline
ME 414/514 HVAC Systems Overview Equipment Outline 2-1 The Complete System 2-2 The Air-Conditioning and Distribution System 2-3 Mechanical Equipment Air-handling Equipment Heating Equipment Boilers Furnaces
More informationRotodynamic Pumps INTRODUCTION:
Rotodynamic Pumps INTRODUCTION: Liquids have to be moved from one location to another and one level to another in domestic, agricultural and industrial spheres. The liquid is more often water in the domestic
More informationCapt. Tim s s Duct Design Mythbusters. The bitterness of poor quality is remembered long after the sweetness of low price is forgotten!
Capt. Tim s s Duct Design Mythbusters The bitterness of poor quality is remembered long after the sweetness of low price is forgotten! WHY CARE ABOUT THE DUCTS? Human Comfort Zone (After All, it s s only
More informationRSES Technical Institute Training Manual 2 72 hours, 72 NATE CEHs, 7.2 CEUs
Lesson 1 - Trade Tools Explain the importance of using proper tools and test instruments. List the various types of wrenches and describe their use. Describe the proper procedures for bending, flaring,
More informationME 410 MECHA ICAL E GI EERI G SYSTEMS LABORATORY
ME 410 MECHA ICAL E GI EERI G SYSTEMS LABORATORY MASS & E ERGY BALA CES I PSYCHROMETRIC PROCESSES EXPERIME T 3 1. OBJECTIVE The object of this experiment is to observe four basic psychrometric processes
More informationDepartment of Mechanical Engineering ME 322 Mechanical Engineering Thermodynamics
Department of Mechanical Engineering ME 3 Mechanical Engineering Thermodynamics Lecture 34 The Psychrometric Chart Psychrometric Properties in EES Air Conditioning Processes Moist Air Properties Using
More informationSubscripts 1-4 States of the given system Comp Compressor Cond Condenser E Evaporator vol Volumetric G Gas L Liquid
Simulation Analysis of Compression Refrigeration Cycle with Different Refrigerants P.Thangavel, Dr.P.Somasundaram, T.Sivakumar, C.Selva Kumar, G.Vetriselvan Abstract --- In this analysis, the performance
More information6. Within an internal combustion engine, the can-shaped component that moves up and down the cylinder
Student ID: 22133336 Exam: 986052RR - Heat When you have completed your exam and reviewed your answers, click Submit Exam. Answers will not be recorded until you hit Submit Exam. If you need to exit before
More informationChapter 14 GAS VAPOR MIXTURES AND AIR-CONDITIONING
Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 14 GAS VAPOR MIXTURES AND AIR-CONDITIONING Mehmet Kanoglu Copyright The McGraw-Hill Companies,
More informationTechnical Development Program
Technical Development Program COMMERCIAL HVAC CHILLER EQUIPMENT Water-Cooled Chillers PRESENTED BY: Omar Rojas Sales Engineer Menu Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7
More informationSeyedeh Sepideh Ghaffari 1 & Seyed Ali Jazayeri 2
Modern Applied Science; Vol. 9, No. 13; 2015 ISSN 1913-1844 E-ISSN 1913-1852 Published by Canadian Center of Science and Education The Design of a Shell-Tube Heat Exchanger as Evaporator an Absorption
More informationAPS Chiller Seminar. Don Brandt, CEM-AEE, BEAP-ASHRAE ASHRAE and IEEE Life Member 3/16/2017
APS Chiller Seminar Don Brandt, CEM-AEE, BEAP-ASHRAE ASHRAE and IEEE Life Member 3/16/2017 Agenda for today Refrigeration Cycle Chiller Types and Refrigerants Compressor Styles Chilled Water Pumping Systems
More information(1) Field of invention and containing the background of the invention:-
(1) Field of invention and containing the background of the invention:- This invention is related to energy conversion from environmental heat or atmosphere thermal energy to mechanical/electrical, without
More informationChapter 10. Refrigeration and Heat Pump Systems
Chapter 10 Refrigeration and Heat Pump Systems Learning Outcomes Demonstrate understanding of basic vaporcompression refrigeration and heat pump systems. Develop and analyze thermodynamic models of vapor-compression
More informationLow GWP Refrigerants for Air Conditioning Applications
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2014 Low GWP Refrigerants for Air Conditioning Applications Samuel F. Yana Motta
More informationThermodynamics I. Refrigeration and Heat Pump Cycles
Thermodynamics I Refrigeration and Heat Pump Cycles Dr.-Eng. Zayed Al-Hamamre 1 Content Introduction The Reversed Carnot Cycle The Ideal Compression Refrigeration Systems Deviation from the ICRS Selection
More informationJurnal UMP Social Sciences and Technology Management Vol. 3, Issue. 3,2015
The Design of a Heat Exchanger Shell - Tube as Evaporator an Absorption Chiller Cycle to Reduce the Temperature of the Air Entering Diesel Engine Heavy Loads 75% And 50% of the Engine Part Seyyede Sepideh
More informationMECHANICAL DEPARTMENT, OITM SEM: 6 TH REFRIGERATION & AIR-CONDITIONING PAPER: ME-302-E UNIT-I Q.1 (a) Derive an expression for the COP of Bell-Coleman refrigeration cycle in terms of pressure. (10) [May-09]
More informationThermodynamics II Chapter 5 Refrigeration
Thermodynamics II Chapter 5 Refrigeration Mohsin Mohd Sies Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia Objectives Introduce the concepts of refrigerators and heat pumps and the measure
More informationTDSHS Air Change Requirements and the Basics of Psychrometrics. Presented by: Aric Murray December 06, 2013
TDSHS Air Change Requirements and the Basics of Psychrometrics Presented by: Aric Murray December 06, 2013 Agenda 1. What are the air change requirements and how do you calculate them? 2. Why are air change
More informationHVAC Fundamentals & Refrigeration Cycle
HVAC Fundamentals & Refrigeration Cycle Change of State of Water & the Refrigeration Cycle Change of State Water The Basic Refrigeration Cycle Types of DX Systems The Chilled water System The Cooling Tower
More informationREFRIGERATION CYCLE Principles of Mechanical Refrigeration Level 2: Cycle Analysis
REFRIGERATION CYCLE Principles of Mechanical Refrigeration Level 2: Cycle Analysis Technical Development Program Technical Development Programs (TDP) are modules of technical training on HVAC theory, system
More informationChapter 2. Alternatives to HCFCs and their Characteristics
Alternatives to HCFCs and their Characteristics Refrigerant - General Chemical used in a cooling system, such as an air conditioner or refrigerator, as the heat carrier which changes from vapour to liquid
More informationDue to its low temperature glide about 1.5 approx. (75% less than R-407C and R-427A), it is suitable for a wide range of applications.
TECHNICAL DATA SHEET R434A () Features and uses of R-434A () is a non-flammable HFC mixture. ODP = 0, compatible with traditional mineral lubricants, alkyl benzene and also with synthetic POE, so there
More informationPIPING SYSTEM EQUIPMENTS
PIPING SYSTEM EQUIPMENTS Introduction Equipments are devices that provide power, process and store materials. Equipments in piping systems depend on the specific industries using them. Specialized equipment
More informationREFRIGERATION AND AIR CONDITIONING
REFRIGERATION AND AIR CONDITIONING About the Author Late (Dr.) Ramesh Chandra Arora served as Professor of Mechanical Engineering at Indian Institute of Technology Kharagpur from 1987 to 2005. He received
More informationMECHANICAL ENGINEERING THERMAL AND FLUID SYSTEMS STUDY PROBLEMS
MECHANICAL ENGINEERING THERMAL AND FLUID SYSTEMS STUDY PROBLEMS MASS BALANCES, PSYCHROMETRICS & HVAC 1 Copyright 2018. All rights reserved. How to use this book The exam specifications in effect since
More informationAIR CONDITIONING. Carrier Corporation 2002 Cat. No
AIR CONDITIONING Carrier Corporation 2002 Cat. No. 020-016 1. This refresher course covers topics contained in the AIR CONDITIONING specialty section of the North American Technician Excellence (NATE)
More informationA/C Cooling Load calculation and measurement
Testo Inc. 40 White Lake Rd. Sparta NJ 07871 (800) 227-0729 A/C Cooling Load calculation and measurement When we talk about sizing an air conditioning appliance (tons of cooling, BTU/h or KW), we are specifying
More informationTechnical Development Program. COMMERCIAL HVAC PACKAGED EQUIPMENT Split Systems PRESENTED BY: Ray Chow Sigler
Technical Development Program COMMERCIAL HVAC PACKAGED EQUIPMENT Split Systems PRESENTED BY: Ray Chow Sigler Menu Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Introduction System
More informationINTRODUCTION HVAC BASICS AND HVAC SYSTEM EFFICIENCY IMPROVEMENT SECTION O 4/19/2012
HVAC BASICS AND HVAC SYSTEM EFFICIENCY IMPROVEMENT SECTION O INTRODUCTION HVAC systems or Heating, Ventilating and Air-Conditioning systems control the environment for people and equipment in our facilities.
More informationSustainability of Automobile Air- Conditioning System Using Refrigerant R1234yf Instead of R134a
Sustainability of Automobile Air- Conditioning System Using Refrigerant R1234yf Instead of R134a Gaurav 1 and Raj Kumar 2 1,2Department of Mechanical Engineering, YMCA University of Science & Technology,
More informationMidwest Industrial Initiative Webinar: Industrial Refrigeration
Midwest Industrial Initiative Webinar: Industrial Refrigeration Opportunities for Energy Efficiency and Cost Savings Thursday, June 6, 2013 www.kw-engineering.com Bryan Hackett, PE kw Engineering What
More informationInstructors: Contact information. Don Reynolds Doug McGee Factory Tech Support
Contact information Instructors: Don Reynolds 616-560-9903 Doug McGee 517-294-3932 Factory Tech Support 888-593-9988 Product Improvements for 2017 Todays Objectives Job Site Information Sheets Low Ambient
More informationPage 1 of Relevant Provincial Jurisdictional legislation.
Page 1 of 15 1. Act, Regulations and Codes (6.7%): To locate information relating to the staffing, operation, maintenance, inspection, and testing of the refrigeration plant and its equipment using reference
More informationAir Conditioning Inspections for Buildings Efficiency of Air Conditioning Systems
. Air Conditioning Inspections for Buildings Efficiency of Air Conditioning Systems PRESENTED BY NIRAJ MISTRY aircon@stroma.com Cooling Load The Refrigeration Load Cooling load on refrigeration system
More informationSystem Modeling of Gas Engine Driven Heat Pump
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 01 System Modeling of Gas Engine Driven Heat Pump Isaac Mahderekal shenb@ornl.gov
More information