INSTRUCTION MANUAL. Self-Charging Robot Vacuum SKY4719. Ver. 1

Transcription

1 INSTRUCTION MANUAL Self-Charging Robot Vacuum Ver. 1 SKY4719

2 Thank you for choosing us! Since 2002, Best Choice Products has been bringing customers high-quality products at the absolute lowest price. With everything ranging from instruments and toys to furniture and outdoor, we ve got your everyday living essentials covered. We re centered around a customer-first philosophy with free shipping, exceptional customer service, and a catalog sourced with you in mind.

3 NOTICE Please retain these instructions for future reference. This machine is intended for indoor use only. This machine is intended for household use only. Use with caution in the presence of children as it may startle or hurt them. Periodically check the connection between the recharger and socket to ensure that it is properly plugged in. To prolong battery life, recharge machine for at least 16 hours after the first use or after a long idle period. Before use, remove all objects that are prone to damage, such as glass or fabric, from the floor. Be aware that if a room is too large the unit may not automatically return to the charging dock when batteries are low. If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed. Do not use this item in a way inconsistent with the manufacturer s instructions as this could void the product warranty. TECHNICAL SPECIFICATIONS Rated Voltage DC 14.8V Rated Power 30W Operating Temperature Range 14 F 113 F Input Voltage/Current DC 24V/0.5A Infrared Remote Control 38KHZ Dimension 13.8 inches (Dia.) x 3.4 inches (H) Weight 6.4 lbs Battery Lithium ion 2200mAh Dustbin Capacity 900ml Small Dustbin and Water Tank 250ml + 650ml Charger V~50/60Hz 0.5A, Output: 24V 500mA Pg. 3

4 WARNING Do not sit or stand on this machine. Do not use the machine in an extremely small, confined space such as a small table. Do not expose the machine to water or other liquids. Do not allow the vacuum to intake liquids. Do not touch the power cable with wet hands. Never use the device in a room where there is a danger of explosion or in the vicinity of flammable liquids or gases. Keep away from cigarettes, lighters, matches, flammable materials, or other heat sources. Do not allow clothing or any part of the body to touch the brush or wheels when the machine is in operation. Do not bend or place heavy objects on the power cord. Do not turn the machine over if you are using the water tank. Remove the water tank before filling it with water. Do not fill the water tank if it is still installed in the unit. REQUIRED ITEMS + AAA - 2 AAA BATTERIES PARTS 1 PERSON ASSEMBLY APPROXIMATELY 10 MIN. ASSEMBLY A ROBOT VACUUM B SIDE BRUSH C ROLLING BRUSH 4 EXTRA PCS 2 PCS Pg. 4

5 PARTS D BRACKET E REMOTE CONTROL F DUSTBIN G BRUSH H HEPA FILTER I FILTER FRAME 2 EXTRA PCS J MOP K TRAILING BAR L SMALL DUSTBIN 1 EXTRA PC M WATER TANK N CHARGING DOCK O CHARGER Pg. 5

6 PRODUCT ASSEMBLY 1 B Attach the part B side brushes to the bottom of the part A unit. Push firmly during installation to ensure that they are properly attached. A 2 C Slide the part C rolling brush onto the axle. 3 D Insert the part D bracket to secure the rolling brush. Fully charge the unit, then turn on the power switch and begin cleaning. Pg. 6

7 DIAGRAM TOP BUMPER SIGNAL RECEIVER DISPLAY SCREEN START/STOP CLEANING DUST COVER CHARGING PORT POWER SWITCH BOTTOM CLIFF SENSORS DOCK CHARGING PORTS FRONT WHEEL SIDE BRUSHES ROLLING BRUSH CLIFF SENSORS BRACKET WHEELS RECHARGEABLE BATTERY Pg. 7

8 PANEL/DISPLAY SCREEN DIGITAL INDICATOR: Displays the current time or error codes. During charging, it will display 1111, and when fully charged it will display FULL. DAY OF WEEK INDICATOR: The numbers 1 to 7 indicate days of the week, Monday to Sunday. SEEPING SPEED INDICATOR: Solid light indicates normal water seeping speed and blinking light indicates fast water seeping speed. The light will turn off and digital indicator will display E012 when the water tank runs out of water. CLEANING INDICATOR: Turns on when the unit is vacuuming or mopping. DOCKING INDICATOR: Turns on when the unit is automatically seeking the charging dock. START/STOP CLEANING: Press this button to start/stop automatic cleaning or mopping. Cleaning will continue until batteries are low, then it will automatically return to the charging dock to charge. Pg. 8

9 REMOTE CONTROL POWER HOME 16ft START/STOP START STOP DIRECTIONAL BUTTONS AAA AAA TURBO FULL GO TURBO WALL SPOT X2 WALL TIMER E FULL GO TIMER SPOT Insert two AAA batteries into the remote control. Remote control has a range of approximately 16 feet. HOME: Unit automatically returns to the charging dock to charge. POWER: Unit enters sleep/wake mode. While in sleep mode, press button for 1 second to wake unit. TURBO: Unit enters deep cleaning mode for ~70 minutes, which is suitable for very dirty floors. WALL: Unit cleans along the wall for ~10 minutes, and then reverts to cleaning normally. SPOT: Unit cleans normally but if it detects trash or excessive dirt it will return to that spot 3 to 4 times to clean it. FULL GO: Unit cleans until the battery is depleted, returns to charging dock, and then continues to clean. TIMER: Set time, cleaning schedule, or water seeping speed (see pages 9-10). START/STOP: Start and stop automatic cleaning or mopping. Cleaning will continue until batteries are low (~80 to 100 minutes), then it will automatically return to the charging dock to charge. DIRECTIONAL BUTTONS: Manually control where the unit moves. SETTING CURRENT DAY/TIME 1) While in standby, press the TIMER button and then press the TURBO button. 2) Press the LEFT/RIGHT buttons to toggle through the days of the week (1 represents Monday and 7 represents Sunday). 3) Hold the UP button to select a day. Hold the DOWN button to cancel a selected day. 4) Press START/STOP to save and continue to setting the time. 5) Press the LEFT/RIGHT buttons to switch between hour and minute. 6) Press the UP/DOWN buttons to increase/decrease the hour or minute. 7) Press START/STOP to save the settings. Pg. 9

10 SETTING CLEANING SCHEDULE 1) While in standby, press the TIMER button and then press the SPOT button. 2) Press the LEFT/RIGHT buttons to toggle through the days of the week (1 represents Monday and 7 represents Sunday). 3) Hold the UP button to select a day. Hold the DOWN button to cancel a selected day. 4) Press START/STOP to save and continue to setting the time. 5) Press the LEFT/RIGHT buttons to switch between hour and minute. 6) Press the UP/DOWN buttons to increase/decrease the hour or minute. 7) Press START/STOP to save the settings. SETTING WATER SEEPING SPEED 1) While in standby, press the TIMER button and then press the WALL button. The seeping speed indicator light will flash. 2) Press the UP button to set normal water seeping speed, which is suitable for hardwood floors or relatively clean floors. The indicator light will go solid and the screen will display ) Press the DOWN button to set fast water seeping speed, which is suitable for tile/marble floors or very dirty floors. This indicator light will turn off and the screen will display ) Press the START/STOP button to save the settings. CLEANING THE ROLLING BRUSH 1) Compress the plastic tabs to remove the bracket. 2) Remove the rolling brush by carefully pulling it from the left side. 3) Use the hook on the brush tool to remove hair from the rolling brush. 4) If necessary, rinse the rolling brush with water. Make sure it is completely dry before reinstallation. Pg. 10

11 CLEANING THE DUSTBIN 1 2 A F Lift the dust cover. Remove the part F dustbin. 3 G I H Open the dustbin and pour out the collected dust/dirt into a waste basket. Use the part G brush tool to clean the dustbin, filter frame, and HEPA filter. If necessary, rinse the parts with water. Make sure that they are completely dry before reinstallation. NOTE: It is recommended that you clean the suction inlet and sensors each time you empty the dustbin. Pg. 11

12 MOPPING FUNCTION 1 J K Attach the trailing bar/mop to the bottom of the unit by inserting it into the designated holes. 2 L 3 M Slide the part L small dustbin onto the part M water tank. Open the plug, fill the water tank with clean water, and replace the plug. Insert the water tank/small dustbin into the unit (replacing the normal dustbin). Pg. 12

13 SETTING UP CHARGING DOCK N POWER INDICATOR SIGNAL EMISSION WINDOW NEGATIVE RECHARGING POLE POWER ADAPTER JACK POSITIVE RECHARGING POLE O 3.2' 3.2' Make sure that there are no obstacles or uneven surfaces 6.5 feet in front or 3.2 feet from the sides of the dock. Do not block the infrared signal emission window or the unit may be unable to find the dock. 6.5' Robot vacuum unit can also be charged with the DC power cord by plugging directly into the unit. Place the part N charging dock on flat ground against a wall and near a wall outlet. Plug the charging dock into the wall outlet. Organize the power cord on the back of the dock so it does not lay on the ground. Pg. 13

14 TROUBLESHOOTING Error Code E001 Problem Cannot detect ground Solution Clean the cliff sensors or place unit on flat ground E002 Suction inlet blocked Clean the sensor head or clear the inlet E003 Left/right wheels not working Clean foreign objects from the wheels E004 Side brushes not working Clean foreign objects from side brushes E005 Left/right wheels off the ground Place the unit on flat ground E006 Rolling brush not working Clean foreign objects from rolling brush E007 Low battery Move the unit back to the charging dock E008 Charging failure Turn on power switch or make sure battery is properly connected E009 Wall detection failure Clean the sensors E010 Front bumper not in place Push the front bumper into place E011 Battery not properly installed Reinstall battery E012 Low water level Remove water tank and refill STORAGE Turn off power before transporting or relegating machine to storage. When not in use, leave the machine on the charging dock to keep the battery in optimal condition. If only periodically used, make sure to recharge the machine at least once a month to keep the battery in optimal condition. Before prolonged storage, charge the battery to full. Then use a screwdriver to remove the battery from underneath the machine and store it in a cool, dry place. Pg. 14

15 Check out more great products: bestchoiceproducts.com

16 ENJOY YOUR PRODUCT! PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee. All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days. All returns must be shipped back to the Best Choice Products Return Center at the customer s expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via . Boxes for return shipping will not be provided by Best Choice Products, and is the customer s responsibility to either use the original shipping boxes or purchase new boxes. Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged. CONTACT US; WE RE HERE 7 DAYS A WEEK TO HELP YOU! bestchoiceproducts.com customerservice@ bestchoiceproducts.com LEARN MORE! WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.