COMPLETE STEAM CLEANING SYSTEM USER GUIDE

Transcription

1 COMPLETE STEAM CLEANING SYSTEM USER GUIDE MODEL JJ-SC-016A

2

3 Thank you for purchasing a BENNETT READ POWER STEAM. Your POWER STEAM incorporates the latest technological advances in home cleaning systems. It imitates the most powerful forces of nature in a sleek, elegant, cleaning system to ensure that your home is easily and properly cleaned. Your new POWER STEAM is manufactured to a high standard of quality and is backed up by a 12 month guarantee by Tevo. Should you need any support from us, please visit or call PLEASE KEEP THIS USER GUIDE IN A SAFE PLACE AND READ IT CAREFULLY BEFORE USING YOUR BENNETT READ POWER STEAM FOR THE FIRST TIME. 1

4 SAFETY GUIDELINES-DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to YOUR SAFETY and PREVENTING DAMAGE OR SERIOUS INJURY. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a potentially hazardous situation which, if not avoided, may result in property damage. RESIDUAL RISKS Additional residual risks may arise when using the accessories which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These include, but are not limited too: Injuries caused by touching any moving parts Injuries caused by touching any hot parts or accessories Injuries caused when changing any parts or accessories Injuries caused by prolonged use of the appliance. When using any appliance for prolonged periods ensure you take regular breaks SAFETY INSTRUCTIONS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. WARNING: When using electrical appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. Read the entire manual carefully before using the appliance. The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury. Keep this manual in a safe place for future reference. 2

5 USING YOUR APPLIANCE Do not direct steam at people, animals, electrical appliances or electrical outlets Do not immerse the appliance in water Do not leave the appliance unattended. Keep children away from unit while in use Do not leave the appliance connected to an electrical outlet when not in use Never pull the power cord to disconnect the appliance from the socket. Keep the appliance cord away from heat, oil and sharp edges Do not handle steam cleaner with wet hands Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or expose cord to heated surfaces Do not use appliance in an enclosed space filled with vapor given off by oil-based paint thinner, flammable substances, or other explosive or toxic vapors Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam-sensitive materials Do not use on any unsealed hard floor surfaces or on surfaces that have been treated with wax or no-wax floors, the sheen may be removed by the heat and steam action. It is recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer Never put de-scaling, aromatic, alcoholic or detergent products into the steam mop, as this may cause damage to your POWER STEAM and/or make it unsafe for use If the circuit breaker trips while using the steam function, discontinue product use immediately and contact the customer support center (Beware of the risk of electrical shock The appliance emits very hot steam to sanitize the area of use. This results in the steam head and cleaning pads getting very hot during use CAUTION: Always wear suitable shoes when using your steam mop and when changing the accessories on your steam mop. Do not wear open-toed footwear. Care should be taken when using this appliance. DO NOT touch any parts which may become hot during use Do not use when microfibre cleaning pad is not installed correctly This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety This appliance is not a toy and children should be supervised to ensure that they do not play with the appliance 3

6 PRODUCT VIEW A. Handle B. Hand-Held Detachable Steam Pod C. Steam Pod Cradle D. Floor Steam Head E. Microfibre Pad x2 F. Carpet Glider G. Window Squeegee G H. Small Brush I. Big Brush J. Angle Nozzle K. Grout Cleaning Tool L. Scraping Tool M. High Pressure Steam Nozzle N. Measuring Cup O. Microfibre Mitt For Fabric Steaming Attachment P. Fabric Steaming Attachment Q. Dusting Attachment O R. Chenille Dusting Mitt S. Universal Adapter T. Steam Extension Hose U. Counter Top Steam Pod V. Counter Top Steam Pod Microfibre Pad A B C L S U D E H I J K M P Q R T V N F PRODUCT COMPONENTS: 1. Handle 2. Remote Steam Control Switch 3. Remote On/Off Switch 4. Signal Transmitting Port 5. Power Cable Winding Hook 6. Steam Power Indicator Light (Handle) 7. Metal Tube 8. Steam Pod Release Button 9. Signal Receiving Port 10. Steam Power Indicator (Steam Pod) 11. Steam Pod Indicator Button 12. Main On/Off Button 13. Steam Control Button 14. Water Tank Cap 15. Water Tank 16. Steam Pod Housing 17. Power Cord 18. Multi-Directional Connecting Axle 19. Floor Steam Head

7 FUNCTIONS AND SPECIFICATIONS FUNCTIONS SPECIFICATIONS Three adjustable steam settings Steam output time: minutes Red and blue light, warm-up and ready function Pressure release valve, keeping the pressure in the heating unit constant The floor steam head has a multidirectional axle, designed to clean around corners and small spaces Remote control handle, allowing the user to control steam settings on the main Steam Pod Steam power indicators on the remote handle and the Steam Pod indicates the amount of steam being emitted from the unit ASSEMBLY: Rated Voltage: Rated Frequency: Output Power: Water Tank Capacity: Waterproof Level: V 50Hz 1500W 320ml IPX4 NOTE: Each steam mop is tested in the factory prior to packaging to ensure product performance and safety. When assembling your new steam mop for the first time you may notice water residue inside the unit. WARNING: Before attempting any of the following operations, make sure that the appliance is switched off and unplugged and that the appliance is cold and contains minimal or no water. ATTACHING THE HANDLE Open the battery cover in the back part of handle, install in 4 x AAA, 1.5v batteries. Close the battery cover NOTICE: It is advisable to remove the batteries from the handle if your BENNETT READ POWER STEAM will be un-used for a long period of time. *Batteries not included 5

8 ASSEMBLY CONTINUED... FIG.2 Slide the bottom end of the Handle tube (A) into the top end of the Handheld Steamer Housing (C) until it clicks into place (fig.2) Secure the assembled handle and pole by using the large screw provided (screwdriver not included) ATTACHING THE STEAM HEAD (FIG.3) FIG.3 Slide the bottom end of Steam Mop Cradle (C) into the Floor steam head (D) until Steam Head Axle (18) clicks into place The Floor Steam Head (D) can be removed from the Steam Mop Cradle (C) by pressing the button on the Floor Steam Head (D) axle FIG.4 ATTACHING THE HAND-HELD STEAM POD (FIG.4) Push the hand held detachable Steam Pod (B) firmly into the Steam Pod Cradle (C) until it clicks into place. Insert bottom part of the Steam Pod into the cradle first and then push the top to secure in place ATTACHING AND REMOVING THE MICROFIBRE CLEANING PAD (FIG.5) FIG.5 The Floor Steam Head (D) is fitted with Velcro at the bottom which can be easily attached to the back of the Microfibre Pad (E). To remove, place the front of your shoe onto the cleaning pad removal tab and press down firmly while lifting the POWER STEAM away from the Microfiber Pad. ATTACHING CARPET GLIDER (FIG.6) Press the assembled Floor Steam Head (D) with Microfibre Cleaning Pad (E) onto the Carpet Glider (F) until it clips into place To remove, step with the front of your shoe onto the Cleaning Pad removal tab and press down firmly, the Carpet Glider will detach from the Steam Head FIG.6 NOTICE: Only attach carpet glider when using BENNETT READ POWER STEAM to steam and refresh carpets. DO NOT use on hard floors. 6

9 OPERATION USING YOUR POWER STEAM AS A FLOOR STEAM-CLEANER 1. Filling the water tank: Turn the water tank cap (14) anticlockwise and remove from the tank (fig.7) Use the Measuring Cup to pour water into the tank. Do not overfill (fig.8) Always use clean, cold tap water Replace the cap on the water tank FIG.7 FIG.8 2. Unwind the Power Cord (17) completely, plug your POWER STEAM into the nearest power outlet and switch on 3. Turning the POWERSTEAM on: When plugged in, the Steam Pod Indicator Light (10) will start to flash Press remote on/off switch (3) on handle once to turn on The Steam Pod Indicator Light will glow red Steam Power indicator lights (6) on the handle and on the Steam Pod (B) will all illuminate simultaneously After about 25 seconds, the Steam Pod Indicator Light on the Steam Pod (B) will change from red to blue and steam will be release from the bottom of the Floor Steam Head (D) (fig.9) FIG.9 4. Press the Remote Steam Control switch (2) repeatedly for the desired steam level suitable for the application. You can adjust the steam intensity according to different objects We recommend you use level 1 for general cleaning and only increase the steam level for high-traffic areas or stubborn dirt When increasing the steam intensity, LED 1, 2 and 3 will turn on depending on the setting you choose NOTICE: The higher the steam intensity the longer the drying time will be on your floors. 7

10 5. Should you wish to turn the steam off and only use the Microfibre Pad, press the Remote Control Switch (2) until none of the LED indicators are showing 6. Your POWER STEAM will automatically go into standby mode if you do not select a steam setting for longer than 6 minutes. The Steam Pod Indicator will start to flash NOTICE: In order to reduce the power consumption of the batteries in the handle, the LED s will automatically switch off if the unit is not in use for longer than 6 minutes, press any button to continue working. 7. Cleaning your floors: Always start in the furthest corner of the room, moving towards the exit door to allow the floor to properly dry before walking on it Adjust steam setting as explained above Move the unit in a slow forward and backward motion ensuring you cover the entire area, continuing until you are satisfied at the section of the floor is clean before moving onto the next section. You can adjust the steam intensity as and when needed When finished, press the Remote on/off switch (3) on the Handle to power down the unit 8. Your POWER STEAM is equipped with a multi-directional axle to aid in cleaning difficult corners or low spaces (fig.10) FIG When switching on your POWER STEAM, the red indicator light (11) on the Steam Pod (B) will flash to indicate pre-heating. If the lights does not illuminate, please check the troubleshooting section for more details NOTICE: If power failure occurs while the unit is in warm-up mode or after the warm-up is complete, the unit might go back into warm-up / re-heat mode once the power returns. USING YOUR POWER STEAM AS A HAND-HELD STEAM CLEANER WITH HIGH-PRESSURE STEAM NOZZLE 1. Unwind the Power Cord (17) completely 2. Press the Steam Pod Release Button (8) and pull the hand-held detachable steam pod (B) away from the Steam Mop Cradle (C) (fig.11) 3. Fill the water tank as explained in previous section under point 1 4. Attach the High Pressure Steam Nozzle (M) onto the Hand-Held Steam Cleaner until it clicks into place (fig.12) 5. Plug in the POWER STEAM into the power outlet FIG.11 FIG.12 8

11 6. Press main on/off switch (12) once and the Indicator Light will glow red, after about 30 seconds, the Indicator Light will change to blue 7. To change modes press the Steam Control Button (13) to select either Dust, Mop or Scrub mode. You can change the steam mode while the Hand-Held Steam Cleaner is in standby or in use. Press the Steam Trigger to start steaming (fig.13) FIG.13 CAUTION: Do not press the Steam Trigger until the Direct Steam Nozzle is connected to the main nozzle of your Hand Held Steam Cleaner. 8. To remove the High Pressure Steam Nozzle, press and hold down the Release Button at the top of the nozzle with one hand and pull the nozzle outward with your other hand (fig.14) FIG.14 NOTE: The Hand Held Steam Pod may continue to emit steam for a few seconds after the trigger is released. DON T remove the high pressure nozzle until steam has stopped completely USING YOUR HAND-HELD STEAM POD WITH COUNTER TOP STEAM POD (T) 1. Attach Counter Top steam Pod Microfibre Pad to the bottom of the pod by lining the velcro tabs up and pressing firmly 2. Insert Steam Pod (B) into Counter Top steam Pod (U) as shown (fig 15) 3. To remove Counter Top Steam Pod, follow instructions as shown in fig 14 above FIG.15 9

12 USING YOUR HAND-HELD STEAM POD WITH STEAM EXTENSION HOSE 1. Attach the Steam Extension Hose (T) to the Hand-Held Steam Pod (B) until it clicks into place (fig.16) 2. Attach the Universal Adapter to the Steam Extension hose (S) (fig.17) 3. Select the desired cleaning accessory for use. Follow the cleaning tool sub-assembly instructions for the selected tool Attach relevant cleaning accessory to the open end of the Universal Adapter (S) (fig.18) 4. To remove the Steam Extension hose, press and hold down the Release Button at the top of the hose with one hand and pull the hose outward with your other hand. (fig.14). FIG.16 FIG.17 FIG.18 CAUTION: Do not press the steam trigger while attaching or removing the accessory hose. CAUTION: Do not use the Accessory Hose without the cleaning tools attached. 10

13 ACCESSORIES CHART CAUTION: When using your POWER STEAM to clean any other electrical appliance, check and follow manufacture s cleaning guidelines. ACCESSORY Window Squeegee Attachment Fabric Steaming Attachment Garment Steamer Cloth (Washable) Dusting Attachment Chenille Dusting Mitt (Washable) Small and Medium Scrubbing Brushes Angle Nozzle REQUIRED ACCESSORIES THAT MUST BE CONNECTED TO THE UNIVERSAL ADAPTOR SUGGESTED USE Shower doors, mirrors, windows, removing soap scum and grime Garment tool for taking wrinkles out of garments, steaming draperies, tablecloths and more. To be clipped into Window Squeegee above before use Use for steaming garments, draperies, tablecloths, etc. To be used with Fabric Steaming Attachment Armchairs, Sofas, cushions, mattresses, car interiors, blinds, vertical walls, garden furniture, garden umbrellas etc. Must be used with Chenille Dusting Mitt below Must be used with Dusting Attachment above. Ovens, microwaves, stove tops, showers, bathtubs, faucet fixtures, tiles, grout, toys, refrigerators, etc Toilets, stove tops, around faucet edges, grout, microwaves, sinks, hard to reach areas, etc Grout Cleaning Tool Scraping Tool Direct Steam Nozzle Countertop cleaner Countertop Steam pod Microfibre Pad Microfibre Pad (Washable) Ideal for cleaning grout lines Cleaning baked on food, grime, and grease. Removing residue or other stubborn substances from surfaces, such as stove tops and ovens Loosen and dislodge compact dirt found in corners and other small spaces For cleaning and disinfecting tabletops and countertops or other smooth large surface. See special notes on disinfecting at the end of this guide For use with Countertop Cleaner For general cleaning of hard floors and refreshing carpets. Only use with Floor Steam Head (D) Carpet Glider For refreshing and neutralising odours from carpets 11

14 CLEANING AND MAINTENANCE: CAUTION: Ensure that the unit is disconnected from the power outlet when cleaning. Drain the remaining water in the tank after every use HOW TO DECALCIFY THE WATER TANK INTERIOR To clean calcium deposits that build up inside the Water Tank, add one or two tablespoons of white vinegar to a full Water Tank. Close the Water Tank Cap and then shake the contents. DO NOT TURN THE STEAMER ON Rinse tank several times with clean water before using again CLEANING PROCEDURE TO REMOVE LIMESCALE If your Steam Mop begins to produce less steam than usual or stops producing steam, you may need to remove limescale. Limescale can develop over time on the metal parts and greatly affect your POWER STEAM s performance. It is necessary to remove limescale on a regular basis; every times you use a full tank of water or at least once a month, especially in areas with hard water. The frequency of limescale removal depends upon the hardness of your tap water and how often you use the POWER STEAM. Follow this procedure to remove limescale: 1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the Water Tank 2. Secure and position the unit to ensure steam is aimed away from the floor or surrounding objects and surfaces 3. Plug the unit in and turn ON by pressing the power button and allow the unit to produce steam until the vinegar/water solution in used up 4. Repeat the above procedure as many times as necessary until a normal steam flow rate is achieved 5. Fill the Water Tank with fresh water and rinse out 6. Fill the Water Tank with fresh water, attach to the unit and release steam through the system until the water tank is empty WARNING: Don t leave the steamer unattended during the limescale removal process and/or while in use. NOTICE: Preform a test clean on a suitable isolated area after each limescale removal to ensure that there is no residue left in the system. This product contains no serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified TEVO repair technician. ALL servicing should be done by an authorized service representative. 12

15 CAUTION: Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks. CLEANING MICROFIBRE PAD(S) Machine washable on warm setting. Always use a mild detergent For best care results, lay flat to dry IMPORTANT: Never use bleach or fabric softener when washing the microfibre cleaning pad. STORAGE: NOTICE: When done cleaning, empty any residual water from the tank and then run the machine at full steam over a basin or bucket to ensure all remaining water is used up, keep running the machine for a few seconds after steam has stopped to empty all water in the system and pipes. Turn power off and unplug the Power Cord Wait until the POWER STEAM has completely cooled before cleaning Remove the Cleaning Pad and wash as per instructions above Rinse all (used) accessories, under running tap water until clean, allow to dry completely before storing Store product in a protected, dry area. Keep measuring cup for future use Keep out of reach of children 13

16 TROUBLESHOOTING: USE THIS TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE EXPERIENCING Any faults not covered in the below table should be resolved by an authorized service representative WARNING: To reduce risk of personal injury, unplug powersteam before servicing and allow to cool. PROBLEM POSSIBLE CAUSES REMEDIES Reduced steam or no steam 1. Water tank may be empty 2. Steam Nozzle may be blocked 3. Unit still in warm up mode 1. Add water to the Water Tank 2. Clean Steam Nozzle 3. Wait 30 to 60 seconds Unit will not turn on 1. Blown fuse 1. Book in for repair at your nearest TEVO service center 2. There is no power to the unit 2. Check cord and plug cord into a working electrical outlet. Make sure unit is plugged in 3. Didn t press Power Button 3. Press Power Button 14

17 REPLACEMENTS PARTS The items below are available for purchase as accessories for your BENNETT READ POWER STEAM multi-function steam cleaning system. To purchase contact TEVO customer care in your area. ITEM PART NO. PART NAME 1. HVC301C01 Microfibre Pad (2 pack) 2. ZHVC Countertop Steam Mop Pad (2 pack) 3. ZHVC Microfibre Mitt 4. ZHVC Window Squeegee 5. ZHVC Chenille Dusting Mitt 6. ZHVC Attachment Set (Includes H, I, J, K, L)

18 CONSUMER GUARANTEE: Your BENNETT READ POWER STEAM multi-function steam cleaning system has a 12 month product guarantee from TEVO (PTY) Ltd. TEVO will replace or repair, at TEVO s option, any defective or malfunctioning part due to manufacturing defect, free of charge from the date of purchase by the original purchaser for 12 months. This guarantee applies to product used for personal or domestic use only, and specifically excludes any malfunction or defect arising from commercial use. This guarantee does not apply to routine maintenance components such as filters and brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or use not in accordance with the user guide is not covered. TEVO is not liable for incidental or consequential damages of any nature associated with the use of this product. TEVO s liability will not exceed the purchase price of this product. Guarantee and service enquiries can be made by contacting: TEVO (Pty) Ltd Gauteng or Durban (031) Cape Town (021) /9 Customer Service Help Line

19 17

20 COMPLETE STEAM CLEANING SYSTEM Brought to you by: