Steam Bug. World's smallest steam iron great for travel

Size: px

Start display at page:

Download "Steam Bug. World's smallest steam iron great for travel"

Joanna Collins
5 years ago
Views:

1 Steam Bug World's smallest steam iron great for travel

2 Table of contents Location of Parts and Accessories Location of Controls Control Information Operation Cleaning and Storage Specifications Warnings and Cautions Warranty

3 Location of parts & accessories Travel Case Measuring Cup Stands (2) Hand Grip Internal Water Tank Heating Indicator Light Power Cord Clip Control Panel (see p. 3) 5. Ironing Plate 10. Power Cord MAX

4 location of controls Water Tank Cap Water Tank Windows (2) Steam Button Temperature Dial Settings Indicator Arrow Voltage Selector Voltage Selector Switch Large view of Voltage Selector 6 3

5 Control information The IRONING PLATE is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases. The HEATING INDICATOR LIGHT illuminates when the Temperature Dial is set to one of the three heat settings. The POWER CORD CLIP holds the power cord securely when wrapped around the base of the Hand Grip for storage. The WATER TANK CAP covers the Water Tank fill hole. The Water Tank Cap is tethered to the unit, and cannot be completely removed. The WATER TANK WINDOWS let you monitor the level of water in the Water Tank. The unit must be sitting upright to correctly read the water level. The STEAM BUTTON is pressed to activate the unit's steam function. Locking the Steam Button down disables steam; pressing the Steam Button releases it into the unlocked position, enabling steam. The TEMPERATURE DIAL is turned to select one of three heat settings, and to turn heating off. The SETTINGS INDICATOR ARROW tells you at what temperature your dial is set. The HAND GRIP is ergonomically designed for user comfort. The Hand Grip contains the unit's Water Tank, and the base is specially designed for the power cord to be wrapped around for storage. The INTERNAL WATER TANK, located inside the Hand Grip, is designed to hold a maximum of 1 oz. of water. 4

6 The VOLTAGE SELECTOR is the recessed switch which is used to set the unit to either V or V electrical voltage standards. By default the Voltage Selector is set to V. The STANDS are the two supports located at the rear of the main body. The Stands are designed to support the unit in an upright position when the Ironing Plate is hot. The MEASURING CUP is designed to help you easily and consistently fill the Water Tank with the optimum amount of water. operation PROPER GRIP Main body surface can get hot. Grip the Steam Bug using the HAND GRIP only. NOTE: Use care when ironing. Shut power off and unplug iron after each use. SETTING VOLTAGE Steam Bug is dual-voltage, which allows it to function correctly in regions with either V or V electrical voltage standards. Voltage is set using the VOLTAGE SELECTOR. IMPORTANT: By default, the VOLTAGE SELECTOR is set to V. Be sure to select the correct voltage for your location before plugging the POWER CORD into an electrical outlet. 5

7 To change the voltage from V default setting: 1. Locate the VOLTAGE SELECTOR SWITCH, recessed inside the slot at the rear of the Steam Bug (see below). Voltage Selector Switch 2. Slide the VOLTAGE SELECTOR SWITCH to the right, so that it is closest to the V label. (A pen tip may be used.) 3. Unit is now ready for use in a 220V region. 4. To use again in a V region, slide the VOLTAGE SELECTOR SWITCH to the left, so that it is the closest to the V label. FILLING WATER TANK (FOR STEAM IRONING) Place unit (IRONING PLATE down) on a flat, heat-resistant surface. Fill MEASURING CUP with water up to MAX mark. NOTE: In order to extend the life of your iron and keep it functioning at maximum potential, it is highly recommended that distilled or demineralized water be used in the INTERNAL WATER TANK. 3. Open WATER TANK CAP. 4. Pour water from MEASURING CUP into INTERNAL WATER TANK. 5. Close WATER TANK CAP. 6

8 STEAM IRONING Turn TEMPERATURE DIAL clockwise as far as possible to set unit to high temperature (MAX). HEATING INDICATOR LIGHT will illuminate. When HEATING INDICATOR LIGHT turns off, press the STEAM BUTTON. The button will lock into raised position, and unit will begin emitting steam from steam vents on IRONING PLATE. NOTE: Unit is designed to steam horizontally. Steam flow will stop whenever unit is in vertical upright position. 3. To stop steam flow, press the STEAM BUTTON again to lock it into lowered position. DRY IRONING IMPORTANT: Make sure the STEAM BUTTON is locked in lowered position before dry ironing. This will prevent any water from accidentally dripping. 1. Plug in POWER CORD. 2. Turn the TEMPERATURE DIAL clockwise so that the SETTINGS INDICATOR ARROW points to one of three heat settings on the TEMPERATURE DIAL. The HEATING INDICATOR LIGHT will illuminate. NOTE: Start with lower temperatures first. High settings are designed for heavy materials and can damage delicate fabrics. 3. When the HEATING INDICATOR LIGHT turns off, IRONING PLATE is heated and ready for use. 7

9 NOTE: During use the HEATING INDICATOR LIGHT will cycle on and off as unit works to maintain a constant temperature. IMPORTANT: Once all ironing tasks are finished, immediately turn the TEMPERATURE DIAL counterclockwise until it is set to off (O) position. Be sure the STEAM BUTTON is locked in lowered position this will prevent water from accidentally dripping during next use. Prop unit upright on STANDS to cool. Refer to Cleaning & Storage guidelines (below) for proper cleaning and storage. Cleaning and storage Turn the TEMPERATURE DIAL to the OFF (O) position. Unplug POWER CORD, and if iron is hot, prop it upright on STANDS to cool for at least 30 minutes. Open WATER TANK CAP and drain any remaining water. Close cap when finished. Wipe main body of iron and IRONING PLATE with a soft cloth lightly moistened with water. DO NOT clean IRONING PLATE with detergents or descalers. DO NOT clean IRONING PLATE with abrasive or corrosive products. DO NOT submerge unit or hold unit under running water. 5. Wrap POWER CORD around base of HAND GRIP and secure the end in the POWER CORD CLIP. 8

10 Cleaning Mineral Build-up Follow steps 1-3 under the Cleaning And Storage section, but leave the WATER TANK CAP open. Make a mixture of 1/2 distilled water and 1/2 vinegar using the included MEASURING CUP. Pour water/vinegar mixture into INTERNAL WATER TANK. Close WATER TANK CAP. Follow normal steam iron procedure, and allow unit to steam out the full contents of the water tank. When finished, lock STEAM BUTTON in lowered position and unplug unit. Allow to cool for 5 minutes, then refill INTERNAL WATER TANK with fresh distilled water. Repeat STEP 4 until vinegar odor dissipates. Allow unit to cool, then store unit as normal. 9

11 Specifications Voltage: V/ V Wattage: W-420W/343W-408W Amperage: a Water Capacity: oz. Heating Time: Sec. (Approximate) Temperature Range: F-428 F (60 C-220 C) Unit Weight: Lbs. (0.42kgs) Unit Size: " w x 5.3" l x 3.1" h 10

12 CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read, adhered to and followed before the unit is operated. save these instructions 11

13 DANGER To reduce the risk of electric shock, burns, fire or injury: Do not use while bathing or in a shower. Do not place or store unit where it can fall or be pulled into a tub or sink. Do not place in, drop or submerge in water or other liquid. Do not reach for unit that has fallen into water. Unplug it immediately. Care should be taken so that objects do not fall and liquids are not spilled onto the unit. For indoor use only. Do not expose unit to rain or other extreme conditions. WARNING Keep away from children. This is not a toy. Close supervision is required when using this appliance near children, pets or plants. Do not leave unattended while plugged in. Use this unit only for its intended use as described in this manual. Unplug this unit during lightning storms or when unused for long periods of time. Never drop or insert an object into any opening. Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit when storing. 12

14 8. 9. The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat. Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. 10. Do not overload electrical outlet. Use only the power source as indicated. 11. Do not carry this unit by cord or use cord as handle Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit s power supply cord or plug is damaged, do not attempt to fix it yourself. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when unit is used. 14. Do not operate in the presence of explosive and/or flammable fumes. 15. Never remove the plug from the socket by pulling the power cord. 16. If Heating Indicator Light does not illuminate when Temperature Control Dial is turned to one of the three settings, unit is not operating normally. Immediately unplug and call Brookstone Customer Service at Unplug Power Cord before filling Internal Water Tank with water. 18. Unit is only meant to be used with included accessories. Using other types of attachments may cause damage to unit or injury to person. 13

15 19. When filling Water Tank, only water should be used. Other cleaning agents could damage unit or cause injury. Distilled or demineralized water is highly recommended in order to minimize potential buildup of deposits. 20. Do not overfill unit. 21. Do not attempt to use steam function without properly filling Internal Water Tank. 22. Do not operate if Steam Vents are blocked. 23. To reduce the risk of contact with hot water or steam, position the Steam Vents away from body before pressing Steam Button. 24. Do not touch Ironing Plate while in use. This may cause burns or injury. 25. Consult manufacturer's guidelines before ironing or steaming for the first time. 26. Always allow the Steam Bug to cool for at least 30 minutes before storing. 14

16 One (1) Year Limited Warranty Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ( Warranty Period ). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone s property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone s property. Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions. Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the Brookstone trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, 15

17 but Brookstone, in so far as permitted by law, provides these products as is. This warranty does not apply to: a) damage caused by failure to follow instructions relating to product s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold as is including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose. brookstone SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 16

18 Merrimack, New Hampshire USA

Handheld Massager with Heat. ineed

Handheld Massager with Heat. ineed Handheld Massager with Heat ineed Table of contents Warnings and Cautions................................................. 2-4 Location of Controls......................................................