ExSELLerate Series Dealer Training Guide. Mini-Marathon 425

Transcription

1 ExSELLerate Series Dealer Training Guide Mini-Marathon 425 At a Glance Specifications Page 2 Introduction Page 3 Overview Page 4 Features and Benefits Page 5 Key Features Page 6 Operation Tips Page 8 Extraction Procedures Page 13 Spotting Procedure s Page 14 Cleaning Tips Page 15 Narrative Bid Specifications Page 16 Accessory Parts List Page 17 Green Cleaning Page 18 Demo Sales Training Guide - For Internal Use Only

2 Specifications Machine Dimensions Mini-Marathon 425 Model Number L X W X H Net Weight in X in X in cm X cm X cm 68 Lbs. (31 kg) Solution / Recovery Tank 4.25 gal. (16.09 liters) / 4 gal. (15 liters) Vacuum Shoe Width 13 in (33 cm) Fixed powder-coated aluminum Design Characteristics Cord 20 ft. (6 m) Drive Mechanism Brush Propelled Frame Corrosion-resistant, powder-coated aluminum Electrical System 115 V (10 A) Solution Control System Solution Tank Design Recovery Tank Design Wheel Dimensions Cleaning System Brush Type Brush Width Brush RPM Cleaning Path Number / Jets Type Intermittent Solution Control Button Removable Rotationally Molded Polyethylene Rotationally Molded Polyethylene 8 in (20 cm) Non-marking Cylindrical / Chevron bristle design 10 in (25 cm) 1,800 rpm 13 in (33 cm) Length 2 / Quick Change Brass Spotter Wand Capability Yes Heated Water No Productivity Cleaning Rate* 1,500 ft 2 per hour (140 m 2 per hour) Motors Brush Motor 115V / 1,800 RPM Vacuum Motor 2 Stage, 1.6 Hp (1,193 W / 10 A) Water Pump 60 psi (4 bar) Warranty Parts 2 year Labor 1 years Tanks 10 years * Based on ISSA standard cleaning times 2

3 Introduction Product Mission The Tornado Mini-Marathon 425 was developed to be a leading compact, self-contained carpet extractor in the industry. The Mini-Marathon cleans in a single path using cylindrical brush, as well has two spray jets to agitate and clean the carpet. While the vacuum shoe recovers the cleaning solution from the carpet fibers. This superior one-piece cleaning technology is safe for a variety of fiber types and commercial carpet cleaning applications. Designed to deliver contractor grade results in a compact footprint, this unit allows you to clean small carpeted areas where larger self-contained extractors cannot fit. The self-contained Mini-Marathon incorporates all of the functions of a self-contained carpet extractor in a compact and simple design. This makes worker training easy and increases their performance and productivity. Many of the distinctive features of the Mini-Marathon 425 gives managers options and flexibility to use the machines for multiple cleaning applications. These machines are effective for daily spotting as well as interim and restorative cleaning applications. Target Market Certified carpet technicians, carpet cleaning specialists, janitors, or in-house facility manager and building service contractors will all appreciate the features of Tornado s Mini-Marathon 425 compact selfcontained carpet extractor designed for interim or deep restoration cleaning. These units are perfect for the following environments: health care environments where elevated sanitation, noise and environmental standards must be achieved; schools and universities where clean environments mean improved test scores; retail or hotel settings where round-the-clock clean and dry floors and aisles mean signify safety and continued business success; and for BSCs who must deliver maximum cleaning performance and speed, while reducing the total cost of cleaning. The Tornado Commitment Tornado Industries is a leading manufacturer of commercial cleaning solutions offering the most comprehensive and innovative line of cleaning equipment in the industry. With over 80 years of industry experience, Tornado manufactures a complete line of upright vacuums, floor machines, automatic scrubbers, sweepers, wet dry vacuums, industrial vacuums and more. Selling through a strong network of national Tornado dealers, we are committed to supporting the profitable growth of our dealer partners by delivering innovative and durable equipment that provides high profit margins for increased business growth. 3

4 Overview Solution Control / Brush Activation Button 2. Handle Adjustment Knobs 3. Power / Vacuum Switch 4. Power Cord 5. Solution Tank Drain Hose 6. Power Cord Wrap 7. Recovery Tank Lid 8. Recovery Tank 9. Solution Tank 10. Optional Solution Line Connector 11. Optional Solution Hose Connector 12. Brush 13. Vacuum Shoe 4

5 Features & Benefits Single cylindrical brush One Button Operation Brush-assisted propulsion for operator ease Chevron design loosens embedded soil and lifts carpet pile to maximize cleaning performance. Brush housing is durable and contains soil and water from splashing on baseboards, and walls and other surfaces In order to make operation as easy as possible the brush and solution are both activated with button. Compact tank design enhances maneuverability and storage Compact Design The compact design enhances maneuverability and storage. This allows for operation where larger extractors cannot go. Service-friendly Four quick disconnect jets and rear access to vacuum motor and pump allow for easy service and preventive maintenance 8 wheels Non-marking Easy transportation over thresholds and stairs Self-leveling brush housing Brush deck self-adjusts with the contour of the floor surface and carpet pile Versatile The Mini-Marathon can be used for spotting, interim and restorative maintenance Removable Recovery Tank The recovery tank is easily removed to allow 100% of soiled water to be drained into a sink, floor drain or floor mounted drain sink. Fixed vacuum shoe Recovers more solution so the carpet dries faster Green Cleaning Cylindrical brush agitation uses less water and chemical. Intermittent pump switch allows operator to use water only when necessary 5

6 Key Features 1. Compact Design With a cleaning path of 13 inches and a compact design, the Mini-Marathon 425 can be used where larger units cannot go. While compact and extremely maneuverable, the Mini- Marathon provides professional, commercial quality, cleaning results. The compact design also allows easy and convenient storage. 2. Simple Operation After the unit is turned on, one button activates both the brush and solution spray. Single button activation simplifies operation and decreases the amount of personnel training time required. 3. Built-In Filter Screen The Mini-Marathon incorporates a built-in solution tank filter screen. Having a built-in screen prevents dirt or debris from the water source or fill-bucket from entering the solution tank, which could potentially cause clogging of the solution system. 4. Quick Dump Recovery Tank The recovery tank sits on top of the solution tank and is easily removed. This allows the operator to quickly dump the recovery tank in a slop sink or any other approved disposal location. 6

7 Key Features 5. Brush Agitation The unit incorporates a chevron style cylindrical brush that will loosen dirt and debris from the carpet fibers. With a chevron style brush, you ensures a more complete and through cleaning. 6. Versatile Cleaning An optional extraction hose and wand can be easily attached to the Mini-Marathon. When the hose and wand are attached, it allows the operator to perform spot and detail cleaning in tight places or at other times a wand unit is needed. 7. Quick Disconnect Jets The Mini-Marathon incorporates two easy-to-remove, quick disconnect spray jets. This allows for quick and easy maintenance of the jets when necessary and no tools are required to remove them. 8. Service Friendly The rear access panel of the Mini-Marathon 425 is easily removed by qualified service staff, exposing the majority of key electrical and mechanical components. Having the ability to quickly remove the back panel ensures ease of service and maintenance. 7

8 Operation Tips Recovery tank for dirty water Solution tank for clean water Solution / Brush control button. Cord wrap Press button to dispense solution and activate the brush. Release button to stop the brush and solution from being released. Main power switch 8

9 Operation Tips Chevron Brush Two quick disconnect jets. 9

10 Operation Tips Optional spotter hose and wand are simple to attach. Optional hose and wand can be used to get into tight or otherwise unreachable areas. Optional hand tools can also be attached to the hose and wand. 10

11 Operation Tips Hose on the back of the unit quickly drains the solution tank. Recovery tank is quickly removed for draining in a sink or floor drain. 11

12 Operation Tips The handle collapses for quick and easy storage. 12

13 Extraction Procedures Step 1 Gather supplies and equipment. Product Checklist Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Post wet floor signs. Vacuum thoroughly. Remove obstructions and furniture from the area to be cleaned. Fill 2-gallon pump-up sprayer with warm water. Mix traffic lane cleaner in a pump-up sprayer. Follow mixing directions. Remove spots. Apply the pre-spray solution using pump up sprayer to a 10 x 10 area. Hold the nozzle of the sprayer at least 12" above the carpet pile. Allow chemical to dwell for 5-10 minutes. Fill the extractor with hot water. DO NOT exceed 150 degrees. Mix extraction solution. Follow mixing directions. Plug in the machine. Operate the extractor by walking backwards and pulling while dispensing the hot water and picking it up with the vacuum head. Overlap each pass to ensure thorough cleaning. After cleaning carpet, place a small square of aluminum foil or 6 mil poly square under the furniture legs to prevent moisture from damaging the finish or rusting the metal glides. Place carpet blowers in clean areas to speed the drying process. Allow carpet to thoroughly dry before removing wet floor signs and opening to traffic. Vacuum cleaner Mini-Marathon 425 Windshear 3000 Carpet Dryer 2-gallon pump-up sprayer Wet floor signs White cotton cleaning cloths Personal protective equipment (rubber gloves, eye protection) Extraction chemical Traffic lane chemical Water-based all-purpose spotter Tar, grease and oil spot remover Defoamer Aluminum foil squares Egg timer Spotting brush Spotting kit (optional) Step 12 Rinse recovery tank with clean water. Step 13 Clean all equipment and tools. Return them to supply area. 13

14 Spotting Procedures Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Test the spotting products on a scrap piece of carpet first. If no carpet scrap is available, test in an inconspicuous area. Allow test area to completely dry; then check for any color change before proceeding. If there is a color change, do not continue. Pretest additional products until a safe spotting agent is found or call a professional cleaning technician. Remove any dry spills with the use of a spotting brush and bone spatula to scrape up the dry residue. (This process is very efficient for mud, mustard, and ketchup.) Then dry vacuum the area. Blot up wet spills immediately with a white absorbent cotton cloth or a layer of white paper towels. The general rule is that unless you know the origin of the stain and have determined that a wet spotter is required, you should always start with a nonflammable dry cleaning solvent (solvent based spotter). Work from the outer edge of the spot toward the center to avoid enlarging the spot. DO NOT pour any dry cleaning solvent - or any other liquid cleaner - directly onto the carpet as this causes penetration into the carpet back, which can produce buckling and deterioration of the backing system. Pour a small amount of solvent on the white cotton toweling and then gently apply to the spot. Blot the area with a dry white cotton cloth. Work the spot by alternately moistening and blotting. When there is no longer any transfer of the spot substance to the cloth, allow the area to dry thoroughly. If the spot remains after using the dry cleaning solvent, then work the spot with a water-based general purpose spotter, using the same moistening and blotting procedures. Follow the same steps as you did with the dry cleaning solvent. Portable spotting machine Vacuum Product Checklist Wet floor signs White cotton cleaning cloths Personal protective equipment (rubber gloves, eye protection) Water-based all-purpose spotter Tar, grease and oil spot remover Spotting brush Spotting kit Spotter chart Step 8 When the stain has been removed, completely rinse the area with tap water to remove spotting agents. Immediately rinse & vacuum with portable spotting machine. Blot with a cotton cloth until the moisture is absorbed. Contact a certified carpet technician if spot persists. 14

15 Cleaning Tips CLEANING TIPS Check the condition of the carpeting. If the carpet is loose, heavily soiled, stained, spotted or badly worn, point this out to the person in charge. Locate an inconspicuous spot on the area to be cleaned. Test carpet for colorfastness before proceeding. Pour the diluted cleaning solution on the spot, cover with a white towel and place a heavy object on top to absorb the cleaning solution. Wait 5 minutes for any reaction to take place. Remove weight. If there is no color transfer, it should be safe to clean. Remove the furniture from the area to be cleaned. Large pieces can be moved to opposite end of the room from where you start cleaning and replaced when it is completed. After cleaning carpet, place a small square of aluminum foil or 6 mil poly square under the furniture legs to prevent moisture from damaging the finish or rusting the metal glides. Clean the area with a vacuum first. Heavily soiled carpet or areas of concentrated foot traffic should be treated with recommended pre-spray chemicals, using a pump-up or electric sprayer. Do not allow any spotter or pre-spray to dry on the carpet. Identify the type of carpet fiber to be cleaned. Most commercial carpet fibers in use are nylon or acrylic based. Best results in cleaning will be obtained if hot water is used to clean these types of fibers. On the other hand, hot water could shrink wool carpet. Exercise caution when cleaning natural fibers. Use cool water test for colorfastness and apply the least amount of cleaning solution possible. Plan your cleaning route. Always try to have the cord to the right of the Marathon extractor so you are working away from the cord. Operate the extractor in parallel passes. Clean the perimeter last. Turn off spray switch in turns to conserve cleaning solution. To decrease dry time, go over the carpet without pressing carpet spray switch. To further decrease the drying time, use the Windshear 3000 Carpet Blower. When running the extractor, do not overfill the recovery tank. Do not allow the water level to rise above the standpipe intake filter inside the recovery tank. If the spray jets become clogged, remove the individual spray tips and soak them in a mild acid or anti-browning chemical to dissolve normal alkaline chemical buildup. When the extractor runs out of cleaning solution, noted by streaking or incomplete cleaning, turn off the machine and drain the recovery tank. Refill as needed and continue cleaning. 15

16 Narrative Bid Specifications Specified Unit Tornado Mini-Marathon 425 Carpet Extractor, Model: Summary The specified unit shall be a 4 gallon, 115-volt corded electric machine. The unit shall be of compact design and have a storage height of inches (70.49 cm). The machine should have a low-profile design feature to increase operator visibility when cleaning. The fixed vacuum is powder coated aluminum bored with a single slot opening to increase airflow, assist water recovery and maximize carpet dry time. The rear panel can be removed for easy access to the circuit breaker, filter and hoses for periodic preventative maintenance cycles and easy repair. The integrated handle avoids moving parts and handle breakage. The two position brush housing is free floating to accommodate uneven floor surfaces and different carpet pile. The v-belt is enclosed in a separate chamber to isolate moving parts from debris and moisture. The warranty shall be as follows: 2 years parts, 1 year labor and 10 years on tanks. Handle Design Brush Design Solution Tank Recovery Tank Jets Solution / Brush Activation Pump Machine Construction Safety Features Wheels Brush Motor The handle shall be collapsible allowing for easy storage. The brushes shall be 10 in length with nylon bristles. The chevron bristles cylinder will rotate away from the solution vacuum shoe at 1,800 rpm. The reverse rotation will assist the operator to propel the machine when cleaning. The solution tank shall be seamless, rotationally-molded polyethylene with a filter screen. This screen will prevent large debris from entering the solution tank and possibly contaminating the water or harm the unit. The recovery tank shall be designed to be easily removed from the unit. This will allow for quick and easy draining of recovered solution. The unit shall have two, quick disconnect jets for quick and easy maintenance. The unit shall have one button that activates both the solution and brush. The pump shall be a 115 volt, 60 psi (4 bar) diaphragm piston pump. The machine shall be constructed of the following material Tanks: Two tanks constructed of polyethylene Frame: Durable polyethylene Control Panel: Aluminum Electrical components are grounded, insulated and contained in a separate compartment away from soil and moisture. Non-marking 8 inch (20 cm) wheels are secured with welded axles for easy maneuverability and quiet transportation. The brush motor shall be 115 volt with a built-in overload protection. 16

17 Accessories Parts List Part Number Description Qty ft. Vacuum Pressure Hose ft. Vacuum Pressure Hose in Drag Wand Standard Utility Hand Tool 1 17

18 Tornado s Commitment to Environmental Sustainability Tornado Industries, Inc. is committed to creating a clean, safe and healthy workplace environment through the use of innovative cleaning technology developed to minimize the impact of cleaning on indoor and outdoor environments. At Tornado, we care deeply about our planet and realize the cleaning industry is in a position to make positive and profound contributions to the environment, ensuring that our children and our children s children inherit a sustainable and healthy planet. That s why we carefully design our machines to deliver not only the latest innovation, but also green features to enhance indoor air quality (IAQ), use less water and chemicals, create less noise, and produce less moisture. Tornado embraces the following ecological and corporate values through green and healthy practices: 1. Water conservation: Our products, such as our carpet extractors, deliver adjustable solution control for safe, healthy and fast-drying floors that eliminate mold and mildew. Our cylindrical brush floor machines use 30% less water. The design of cylindrical brush machines minimizes splashing and over spray by containing water within the machine housing. Cylindrical brush machines have six times the contact pressure of a conventional rotary brush machine, which not only helps reduce water usage, but also improves worker productivity and reduces labor costs. 2. Less chemicals: Due to recent green legislation and the development of new cleaning standards, all of our cylindrical brush machines and carpet extractors are designed to use less chemicals as well as provide increased rotations per minute (RPMs). The adjustable head pressure helps to minimize the need for powerful and potentially harmful chemicals. Our carpet extractors have enhanced vacuum systems that limit the possibility of mold and mildew from developing and speed carpet-drying time. The result? Areas cleaned are ready for use faster and are safer for building occupants. 3. IAQ Enhancement: Vacuum cleaners including uprights, backpacks and canisters can release dust and debris into the air if they are not designed with advanced infiltration systems. That s why Tornado has developed a comprehensive product family of high-filtration vacuums with true HEPA filtration to minimize dust and exhaust from escaping the vacuum. All of our carpet care cleaning equipment has been Carpet & Rug Institute (CRI) and Tandus Industries tested and approved for green cleaning. What s more, many of our UHS Ultra High Speed machines have passive vacuum systems to trap contaminants before they become airborne. 4. Reusable and Recyclable: Our machines are designed with durable polypropylene tanks, housings and other components that are recyclable after the machine is no longer in use. All Tornado machines proudly display the recyclable logo. Our long lasting, deep cycle, rechargeable batteries increase run time and minimize down time and time spent on battery maintenance. Our cylindrical brush technology creates less environmental waste by utilizing one cylindrical pad to every 100 rotary brush pads, increases the productivity of your maintenance staff with less time spent on pad maintenance and replacement. 5. U.S. Green Building Council Member: We support standards and the criteria established by certification bodies such as the U.S. Green Building Council, The Carpet and Rug Institute s (CRI) Green Label Certification program, the Green Seal GS-37 standards, and more. 18

19 Notes ExSELLerate Series Sales Training Series Mini-Marathon

20 Copyright Tornado Industries. ALL RIGHTS RESERVED. Use of text, copy, or distribution of this document is protected by law VACUUMS