BSD/CSD/CSDX T SFC Series Air deliveries from 0.87 to m 3 /min Pressures 5.5 to 15 bar

Size: px
Start display at page:

Download "BSD/CSD/CSDX T SFC Series Air deliveries from 0.87 to m 3 /min Pressures 5.5 to 15 bar"

Transcription

1 Rotary Screw ompressors with variable frequency drive and refrigeration dryer modules SD/SD/SDX T SF Series ir deliveries from 0. to.0 m /min Pressures 5.5 to 5

2 What qualities do users look for in a compressor with variable frequency drive and a refrigeration dryer? Normally, the answer would be efficiency and reliability with compressed air of constant quality. That may sound simple, but a lot of very different factors play important parts. Energy costs, for example, taken over the lifetime of a system, add up to a multiple of investment costs. This is why efficiency is vital in the production of compressed air. ir system investment Maintenance costs Energy costs Potential energy savings T SF appropriately modular has the answer - flexible modular design SD, SD and SDX screw compressors can be combined with refrigeration dryer and/or SF variable frequency drive modules, allowing the most varied requirements of air quality and economy to be fulfilled. further advantage is the minimised installation work needed as the machines are prepared for immediate connection and operation. SD, SD and SDX an economical basis The new SD, SD and SDX series compressors with energy-saving : drive serve as the basis for the modular concept. They are particularly efficient, durable and reliable because of their generously-sized airends with SIGM PROFILE rotors turning at low speeds. T Refrigeration dryer SD, SD and SDX compressors can be supplied with an attached refrigeration dryer module as required. The compressor and dryer are accommodated in separate cabinets with individual apertures to increase operational reliability. Just as vital is the reliability of air supplies in the quality and quantity needed - these are the most significant requirements for production plant. 9 5 Sigma Frequency ontrol The SF variable frequency drive module is available for all compressors in the range. The SF module and the compressor form a compact, hard-wired unit with a small footprint and short communication paths between the control electronics and drive motor. The system is assembled, tested and ready to go. 5 9 Inlet valve Electric motor irend Fluid separator with cartridge Fluid cooler Fluid filter ompressed air aftercooler SF module ontroller with industrial computer Flexible, modular design The intelligent, modular concept of the T SF machines provides the right answer to every application. The refrigeration dryer module () turns a standard rotary screw compressor into a compact compressed air system that can supply dried air of the highest demands. When the SF module () is added, the compressor speed can be varied to adjust automatically to the air demand. can supply all possible combinations of these modules. = SD, SD or SDX screw compressor = SF module = Refrigeration dryer module

3 SD T SDX T with compact dryer Dependable centrifugal separator centrifugal separator with an electronically controlled EO-DRIN is installed between the compressor and the dryer. This ensures dependable and efficient initial separation and drainage of condensate, even under conditions of high ambient temperature and humidity. Refrigeration dryer with EO-DRIN The dryer is also fitted with an EO-DRIN that works on a levelcontrolled basis and, in contrast to solenoid Innovative: SD T, SD T and SDX T series valves, does not vent air when draining, The new compressor/dryer combinations are capable of meeting every conceivable conserving energy and contributing to operational reliability. demand made in daily practice, reliably and economically. Thrifty, rotary screw compressors are turned into complete air supply systems Heat exchanger and separator in stainless steel by attaching dryer modules to deliver air of highest quality. The dryer's heat exchanger is non-corroding and resistive to deposits. The The compressor and dryer are accommo- separate stainless steel dated in separate cabinets to increas condensate separator reliability and safety of operation. reliably removes accumulating condensate SD 0 T rear view Thermal insulation is omitted from the illustration Thermal insulation omitted from the air, even when flow rates fluctuate. ll the dryer's components and piping meet the strictest requirements of operational safety and reliability. Interconnected and ready to use SIGM ONTROL The refrigeration dryer module in its separate cabinet is ll components are easily accessible for SIGM ONTROL constantly monitors the compres- attached to the standard air compressor and piped and maintenance, a further advantage that sor, refrigeration dryer wired ready for use. More than sufficient space allows all the increases availability. and condensate components of the dryer to be generously sized. drains. lso, the independent housing of the two modules prevents the heat of compression affecting the dryer. If required, dryer mal- Excellent cooling allows the machine to work reliably in functions can be ambient temperatures up to 5. defined as warnings or alarms and forwarded to a control centre.

4 SF consequent efficiency uilt for higher ambient temperatures The generously-sized SF module with its efficiently-cooled control cabinet allows trouble-free operation in ambient temperatures up to +5. Innovative: SD SF, SD SF and SDX SF series These rotary screw compressors with large, efficient airends, high performance SIGM PROFILE rotors and directly-coupled drives with no transmission losses are real energy savers. This applies particularly to variable speed machines equipped with SIGM FREQUENY ONTROL. Depending on the size of the compressor, power-savings of up to 50 percent can be achieved in larger air systems. No interference The electro-magnetic compatibility (EM) of the components and of the complete machine has been tested and certified. SD T SF front view Other variable speed compressors Transmission losses Power consumption Maintenance costs Uncompromising energy-savers SF compressors SD SF, SD SF and SDX SF machines from are economical rotary screw compressors with directly-coupled, variable frequency drives. Their large, slow-speed airends with energy-saving SIGM PROFILE rotors show outstanding performance data over the whole of the controlled speed range. Furthermore, these machines can run at full load over a 00 percent duty cycle with no increased service requirement. The directly-coupled drive functions without any of the transmission losses associated with geared drives. It has fewer components, a feature that brings improved reliability, extended operational life and reduced noise levels. The directly-coupled one-to-one drive brings triple savings: firstly with efficient power transmission, secondly with reduced power consumption and thirdly with lowered servicing and downtime costs. Pressure in Full load current in percent onstant The air delivery of the SD, SD and SDX compressors with SF can be matched to current air demand as indicated by system, by varying their speed within the control range. s a result, working is kept Pressure + 0. onstant Time constant within the narrow band of ± 0., depending on the buffering capacity of the air network. The resulting reduction in maximum system saves hard cash, as each of saved lowers power consumption by around seven percent. Soft starting with no current spikes Thanks to the controlled ramping up of drive motor starting current from zero to full load, the motor 00 % Direct start 00 % Star-delta start Soft start 00 % SF machine 500 % 00 % 00 % 00 % 00 % 0 % Time starting frequency (the number of motor starts possible without overheating within a given period of time) is almost unlimited. urrent peaks, damaging to the mains power network and to equipment, are reliably eliminated without the need for expensive electronics. Furthermore, the controlled acceleration and deceleration of moving parts reduces dynamic loading.

5 SD/SD/SDX T SF eight decisive advantages SIGM PROFILE IREND given power can be used to turn a small airend at high speed or a larger airend at slow speed. Larger, low speed airends are more efficient, delivering more compressed air for the same drive power. That is why developed airends especially for the SD, SD and SDX series that precisely match the individual drive power and motor speed of each machine in the range. The slightly higher cost of the larger airend is quickly recovered by the energy saved during operation. 5 n efficient condensate separator in stainless steel The separator tank in the refrigeration dryer is made completely of stainless steel and is non-corroding. deflector plate forces the compressed air streaming into the separator into cyclonic motion. Finally, the air flows through a stainless steel wire web that provides a very high degree of separation of 99.9 percent. This is almost constant, despite fluctuating airflow, reliably maintaining the dew point. Solid particles are also washed out and eliminated together with the condensate. irend Motor speed = airend speed oupling Drive motor The energy-saving, directly-coupled drive The advantage of this drive is not just the elimination of transmission losses. The drive motor and the airend are joined by the coupling and its housing into a compact and rigid unit that needs no regular maintenance apart from greasing the motor bearings. Should the coupling ever need to be replaced it can be done in just a few minutes without any disassembly of the unit. The opening in the coupling housing is more than adequate to replace the two coupling sections. SF module There are good reasons why frequency converters from Siemens are used for s variable speed compressors. onverter efficiency is the maximum possible; there is outstanding communication between the SF module and SIGM ONTROL and the compressor controller itself is based on a Siemens industrial computer. Worldwide service is guaranteed at all times because of Siemens' global presence. Finally, the SF module and SIGM ONTROL are tested and certified both as individual components and as a system to EM directive EN 550 for class industrial power supplies. SD/SD/SDX SF up others to up to,00 rpm,000 rpm Low speeds Every SD/SD/SDX SF machine has the same mechanical components as those used in fixed speed machines. This not only ensures highest reliability and availability but guarantees optimum energy efficiency as well. The lowest speed and the largest airend possible - the maximum speed of an SD/SD/SDX SF is only around,00 rpm - are, after all, the basic requirements for really economical production of compressed air. dded to this is longer life and lower servicing effort. The use of standardised drive motors is another contribution toward lasting availability. Flexible selection The wide range of directly-coupled SIGM PROFILE airends produced by make it possible to select the one that works most efficiently within the and volume required. The right choice of airend results in the most economical -to-frequency profile for the SD/SD/SDX SF machines. -to-frequency profile that ensures maximum flexibility both in and volume under the aspect of highest possible economy is programmed into the SF module. Pressure in 0. steps 0 0. steps 0. steps Hz SIGM ONTROL SIGM ONTROL is based on a robust, updateable industrial computer with a realtime operating system. The operational state of the compressor is quickly ascertained with the help of coloured LEDs. four-line, plain text display, easily understood icons and touch keys allow fast set-up and operation. SIGM ONTROL regulates and monitors the compressor and the T and SF modules fully automatically and shuts the machine down immediately in the event of an alarm. Interfaces are provided as standard for connecting a modem, a second compressor and for connection to a data network (Profibus DP). Low specific power requirement Large, low speed airends are more efficient. They deliver more compressed air for the same drive power, not just at full load but over the whole range of control an important aspect as far as variable speed machines are concerned.. kw per m³/min is taken as a reference value for very good specific power requirement (referred to the effective electrical power consumption of an SF compressor at ). Variable speed compressors are only economical if their specific power requirement is low over the whole of their control range.. kw/m /min at

6 Equipment omplete machine Ready for operation, fully automatic, super-silenced, vibration-damped, all panels powder coated. Sound insulation Panels lined with laminated mineral wool; maximum d() to PNNT. at one metre distance, free-field measurement. Vibration damping Dual antivibration mountings using rubber bonded metal elements. irend Genuine rotary screw, singlestage, fluid-injected airend with SIGM PROFILE rotors. Technical specifications Rated motor power kw Drive Direct torsional-elastic coupling, without gearing. Electric motor Premium-efficiency electric motor of quality German make to IP 55 and insulation class F for additional reserve; PT thermistor sensors (full motor protection optional). Motor/airend union irend with integrated coupling flange. Electrical components T version with refrigeration dryer module (Ra refrigerant) Model Working SD T 0 SD T 0 SD T 0 SD 0T 0 SD T 0 SDX T 0 SDX T 0 Overall FD* at working m /min ontrol cabinet to IP 5, control transformer, Siemens MSTERDRIVE plugin module with control unit; volt-free contacts for ventilation control. Max Dryer power consumption * FD to ISO : 99, nnex ; **)Sound level to PNNT. at m distance, free-field measurement kw Sound level**) d() 9 0 Weight kg Fluid and airflow ir intake filter with pre-filtration; pneumatic and venting valves; relief valve; minimum /check valve, rigid piping with newly-developed flexible pipe couplings. ooling fluid reservoir with three-stage separation system; thermostatic valve and fluid filter. ir cooling The standard version is air-cooled featuring separate aluminium coolers for compressed air and fluid and a radial fan driven by its own motor. Refrigeration dryer F-free, R a refrigerant, fully insulated, permanently sealed refrigerant circuit, hot-gas bypass control, electronic condensate drain and centrifugal separator upstream. SF version with variable speed drive module Model SD SF SD SF SD 0 SF SD SF SDX SF Working Overall FD* at working m /min Max Sound level**) d() Weight kg SIGM ONTROL Industrial computer for monitoring and control, with interfaces for data communication comprising RS for a modem, RS 5 for a slave compressor in base load sequencing mode and a Profibus DP interface for data networks. Prepared for Teleservice. Ergonomic control panel Red, yellow and green LEDs show the operational state of the machine at a glance. Four-line, plain text display; touch-keys and LED icon indications; display of motor speed. Prime functions Fully automatic monitoring and regulation of airend discharge temperature; monitoring of motor current, direction of airend rotation, air filter, fluid filter, separator cartridge; display of measured data, operating hours and service interval counters for primary components, status data and event memory data. T SF version with refrigeration dryer and variable speed drive Model SD T SF SD T SF SD 0 T SF SD T SF SDX T SF Working Overall FD* at working m /min Pressure range -, , , , , Dryer power consumption kw..9., SD 5 SD 05 SDX Dryer Sound level**) d() Dimensions 005 SD 0 SD 5 SDX Weight kg SF outlet SF Dimensions W x D x H mm ooler Motor 00 x 005 x x 005 x x 0 x 5 00 x 0 x 5 00 x 0 x 5 00 x 5 x x 5 x SD 00 SD 00 SDX ompressor outlet Dryer outlet ompressed air connection

7 Different fields of application need different grades of air treatment hoose the required grade of treatment according to your field of application: ir treatment using a refrigeration dryer (+ dew point) Examples: selection of treatment classes to ISO 5- Dairies, breweries Food and semi-luxury food production Very clean conveying air, chemical plant Pharmaceuticals Weaving machines, photo labs, pharmaceuticals Paint spraying, powder coating D Solids Water Oil acteria FST FE FST FD FFG T FF FF ED ir receiver SF SD 0T ompressor THNF Explanation THNF=bag filter cleans dusty and highly contaminated intake air ED = EO-Drain electronic level-controlled condensate drain FD = particulate filter ppm separates dust particles (attrition) > µm FE = microfilter 0.0 ppm separates oil aerosols and solid particles > 0.0µm, oil content 0.0 mg/m³ FF = microfilter 0.00 ppm separates oil aerosols and solid particles > 0.0µm, oil content 0.00 mg/m³ FG = activated carbon filter for adsorption of oil vaspours, oil vapour content 0.00 mg/m³ FFG = combination filter comprising FF and FG FST = sterile filter for bacteria-free compressed air T = activated carbon adsorber for adsorption of oil vapours, oil vapour content 0.00 mg/m³ quamat for condensate separation Rotary screw compressor SF T with integrated refrigeration dryer, dew point down to + ; compressor available with variable frequency drive Packaging, control and instrument air General works air, quality sandblasting D E G erosol oil 0.00 mg/m, particle retention >0.0 µm erosol oil 0.0 mg/m, particle retention >0.0 µm erosol oil mg/m, particle retention > µm E G Oil vapour content 0.00 mg/m, particle retention >0.0 µm, sterile, odourless and tasteless Oil vapour content 0.00 mg/m, particle retention >0.0 µm Oil vapour content 0.00 mg/m, particle retention > µm FE quamat ontaminants + Solids - + water - + oil - + bacteria - Degree of filtration Solid particles Humidity Total oil content Max. no. of particles per m with size d (µm) PDP (x=liquid water in g/m ) mg/m 0 as specified by user x x x 0.0 ISO 5- lass 0. 0.d d.0.0d 5.0 µm mg/m KOMPRESSOREN GmbH 90 oburg Postfach GERMNY Phone Fax Website: productinfo@kaeser.com P-5/0ED./0 Specifications are subject to change without notice

Rotary Screw Compressors BSD/CSD/CSDX T SFC Series

Rotary Screw Compressors BSD/CSD/CSDX T SFC Series Rotary Screw ompressors SD/SD/SDX T SF Series With the world-renowned SIGM PROFILE ir deliveries from 0.87 to 5.85 m /min, Pressures 5.5 to 5 What do you look for in a compressor with variable frequency

More information

Rotary Screw Compressors ASD T SFC With the world-renowned SIGMA PROFILE Air delivery from 0.56 to 5.51 m³/min Pressure 5.

Rotary Screw Compressors ASD T SFC With the world-renowned SIGMA PROFILE Air delivery from 0.56 to 5.51 m³/min Pressure 5. www.kaeser.com Rotary Screw Compressors ASD T SFC With the world-renowned SIGMA PROFILE Air delivery from 0.56 to 5.5 m³/min Pressure 5.5 to 5 What do you look for in a compressor with variable frequency

More information

With the world-renowned SIGMA PROFILE

With the world-renowned SIGMA PROFILE www.kaeser.com Rotary Screw Compressors BSD/CSD/CSDX T SFC Series With the world-renowned SIGMA PROFILE Free air delivery 0.87 to 16.10 m³/min, Pressures 5.5 to 15 11 What do you look for in a compressor

More information

Rotary Screw Compressors. with variable frequency drive. ESD SFC Series. FADs from 5.0 to 40.5 m³/min Pressures from 5.5 to 15 bar

Rotary Screw Compressors. with variable frequency drive. ESD SFC Series. FADs from 5.0 to 40.5 m³/min Pressures from 5.5 to 15 bar Rotary Screw Compressors with variable frequency drive ESD SFC Series FDs from.0 to 0. m³/min Pressures from. to bar What qualities do users look for in a compressor? ESD SFC ultimate efficiency nalysis

More information

Rotary Screw Compressors DSD/DSDX Series With the world-renowned SIGMA PROFILE Free air delivery from to m³/min Pressure 5.

Rotary Screw Compressors DSD/DSDX Series With the world-renowned SIGMA PROFILE Free air delivery from to m³/min Pressure 5. www.kaeser.com Rotary Screw Compressors DSD/DSDX Series With the world-renowned SIGMA PROFILE Free air delivery from.68 to 0.0 m³/min Pressure 5.5 to 5 What do you expect from a compressor with variable

More information

Rotary Screw Compressors SX Series With the world-renowned SIGMA PROFILE Free air delivery 0.26 to 0.80 m 3 /min, Pressures bar

Rotary Screw Compressors SX Series With the world-renowned SIGMA PROFILE Free air delivery 0.26 to 0.80 m 3 /min, Pressures bar www.kaeser.com Rotary Screw Compressors SX Series With the world-renowned SIGMA PROFILE Free air delivery 0. to 0.0 m /min, Pressures What do users expect from a compressor system? They expect maximum

More information

Rotary Screw Compressors with variable speed drive. DSD SFC Series. FAD from 3.25 to 26.6 m³/min Pressures 5.5 to 15 bar

Rotary Screw Compressors with variable speed drive. DSD SFC Series. FAD from 3.25 to 26.6 m³/min Pressures 5.5 to 15 bar Rotary Screw Compressors with variable speed drive DSD SFC Series FD from. to. m³/min Pressures. to What qualities do users look for in a compressor with variable frequency drive? s a compressed air user,

More information

Rotary Screw Compressors CSD Series With the world-renowned SIGMA PROFILE Free air deliveries 5.5 to 12 m³/min, Pressure 5.

Rotary Screw Compressors CSD Series With the world-renowned SIGMA PROFILE Free air deliveries 5.5 to 12 m³/min, Pressure 5. www.kaeser.com Rotary Screw Compressors CSD Series With the world-renowned SIGMA PROFILE Free air deliveries. to m³/min, Pressure. to bar What do you expect from a compressor system? As a compressed air

More information

Rotary Screw Compressors ASD Series With the world-renowned SIGMA PROFILE Free Air Delivery 2.09 to 5.51 m 3 /min, Pressure 5.

Rotary Screw Compressors ASD Series With the world-renowned SIGMA PROFILE Free Air Delivery 2.09 to 5.51 m 3 /min, Pressure 5. www.kaeser.com Rotary Screw Compressors ASD Series With the world-renowned SIGMA PROFILE Free Air Delivery.0 to. m /min, Pressure. to bar What do you expect from a compressor system? As a compressed air

More information

Rotary Screw Compressors CSD / CSDX Series

Rotary Screw Compressors CSD / CSDX Series Rotary Screw Compressors CSD / CSDX Series With the world-renowned SIGMA PROFILE Free air delivery from.07 to 6.6 m³/min, Pressure 5.5 to 5 bar CSD(X) Series CSD/CSDX Setting the standard KOMPRESSOREN

More information

Rotary Screw Compressors HSD/HSD SFC Series Free air delivery 10.1 to 86.0 m³/min Pressure 5.5 to 15 bar

Rotary Screw Compressors HSD/HSD SFC Series Free air delivery 10.1 to 86.0 m³/min Pressure 5.5 to 15 bar www.kaeser.com Rotary Screw Compressors HSD/HSD SFC Series Free air delivery 0. to 6.0 m³/min Pressure. to What do you expect from a compressor system? As a compressed air user, you expect maximum efficiency

More information

Rotary Screw Compressors CSD Series With the world-renowned SIGMA PROFILE Free air deliveries 5.5 to 12 m³/min, Pressure 5.

Rotary Screw Compressors CSD Series With the world-renowned SIGMA PROFILE Free air deliveries 5.5 to 12 m³/min, Pressure 5. www.kaeser.com Rotary Screw Compressors CSD Series With the world-renowned SIGMA PROFILE Free air deliveries. to m³/min, Pressure. to bar What do you expect from a compressor system? As a compressed air

More information

Rotary Screw Compressors ASD Series

Rotary Screw Compressors ASD Series www.hpccompressors.co.uk Rotary Screw Compressors ASD Series With the world-renowned SIGMA PROFILE Free air delivery 0.87 to 6.6 m³/min, Pressure 5.5 5 bar ASD series ASD: Long-term savings KAESER KOMPRESSOREN

More information

Rotary Screw Compressors. ESD Series. Air deliveries from 20.5 to 42 m 3 /min Pressure 5.5 to 15 bar

Rotary Screw Compressors. ESD Series. Air deliveries from 20.5 to 42 m 3 /min Pressure 5.5 to 15 bar Rotary Screw Compressors ESD Series ir deliveries from 0.5 to m /min Pressure 5.5 to 5 bar What qualities do users look for in a compressor? ESD quantum leap in efficiency There are three steps to efficiency:

More information

Rotary Screw Compressors CSD / CSDX Series

Rotary Screw Compressors CSD / CSDX Series www.hpccompressors.co.uk Rotary Screw Compressors CSD / CSDX Series With the world-renowned SIGMA PROFILE Free air delivery from.07 to 6.6 m³/min, Pressure 5.5 to 5 bar CSD(X) Series Modular design CSD/CSDX

More information

Rotary Screw Compressors SK Series

Rotary Screw Compressors SK Series Rotary Screw Compressors SK Series With the world-renowned SIGMA PROFILE Air delivery from.0 to.50 m /min, Pressure 5 bar SK SK Series Series SK: Long-term savings Discerning compressed air users expect

More information

Rotary Screw Compressors SM Series

Rotary Screw Compressors SM Series Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Free air delivery 0. to.5 m³/min, Pressures / / 5 bar SM Series Quiet, dependable performance SM: Long-term savings Today s users

More information

Rotary Screw Compressors BSD Series With the world-renowned SIGMA PROFILE Air deliveries 3.6 to 8.15 m 3 /min, Pressure 5.

Rotary Screw Compressors BSD Series With the world-renowned SIGMA PROFILE Air deliveries 3.6 to 8.15 m 3 /min, Pressure 5. www.hpccompressors.co.uk Rotary Screw Compressors BSD Series With the world-renowned SIGMA PROFILE Air deliveries.6 to 8.5 m /min, Pressure 5.5 to 5 bar BSD The new standard in efficiency What do you expect

More information

Rotary Screw Compressors. ASK Series With the world-renowned SIGMA PROFILE Flow rate 0.79 to 4.65 m³/min, Pressure 5.5 to 15 bar.

Rotary Screw Compressors. ASK Series With the world-renowned SIGMA PROFILE Flow rate 0.79 to 4.65 m³/min, Pressure 5.5 to 15 bar. Rotary Screw Compressors ASK Series With the world-renowned SIGMA PROFILE Flow rate 0.79 to 4.65 m³/min, Pressure 5.5 to 15 bar www.kaeser.com ASK series ASK Maximum performance Discerning users expect

More information

Rotary Screw Compressors BSD Series

Rotary Screw Compressors BSD Series www.hpccompressors.co.uk Rotary Screw Compressors BSD Series With the world-renowned SIGMA PROFILE Free air delivery. to 8.9 m³/min, Pressure 5.5 5 bar BSD Series Service-friendly design BSD Setting the

More information

Rotary Screw Compressors DSD/DSDX Series

Rotary Screw Compressors DSD/DSDX Series Rotary Screw Compressors DSD/DSDX Series With the world-renowned SIGMA PROFILE Free air delivery from.68 to 0.0 m³/min Pressure 5.5 to bar DSD(X) series DSD/DSDX Leading the way KAESER KOMPRESSOREN pushes

More information

ASK Series Rotary Screw Compressors

ASK Series Rotary Screw Compressors ASK Series Rotary Screw Compressors With the world-renowned SIGMA PROFILE Free air delivery 0.79 to.65 m³/min, Pressure 5.5 to 5 bar ASK series ASK More powerful, more efficient Today s users expect maximum

More information

Rotary Screw Compressors SM Series

Rotary Screw Compressors SM Series Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Free air delivery 0.0 to.50 m³/min, Pressures / / 5 bar SM Series SM: Long-term savings Today s users expect maximum availability

More information

Refrigeration Dryers TG TI Series

Refrigeration Dryers TG TI Series www.kaeser.com Refrigeration Dryers TG TI Series Flow rate. to. m³/min Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases that always contains

More information

Rotary Screw Compressors. ASK Series With the world-renowned SIGMA PROFILE Flow rate 0.79 to 4.65 m³/min, Pressure 5.5 to 15 bar COMPRESSORS

Rotary Screw Compressors. ASK Series With the world-renowned SIGMA PROFILE Flow rate 0.79 to 4.65 m³/min, Pressure 5.5 to 15 bar COMPRESSORS COMPRESSORS Rotary Screw Compressors ASK Series With the world-renowned SIGMA PROFILE Flow rate 0.79 to 4.65 m³/min, Pressure 5.5 to 15 bar www.kaeser.com ASK series ASK Maximum performance Powerful and

More information

Rotary Screw Compressors ASD Series

Rotary Screw Compressors ASD Series www.hpccompressors.co.uk Rotary Screw Compressors ASD Series With the world-renowned SIGMA PROFILE Free air delivery 0.87 to 6.26 m³/min, Pressure 5.5 15 bar ASD series Service-friendly design ASD: Long-term

More information

Rotary Screw Compressors SK Series

Rotary Screw Compressors SK Series www.hpccompressors.co.uk Rotary Screw Compressors SK Series With the world-renowned SIGMA PROFILE Free air delivery 0.5 to.70 m³/min, Pressure 5.5 www.kaeser.com SK series SK Long-term savings Discerning

More information

Filters & Centrifugal Separators

Filters & Centrifugal Separators www.kaeser.com s & Centrifugal Separators Flow rates 0.8 to 8 m³/min Why use compressed air filters? On average, a compressor sucks in up to 90 million particles of dirt, hydrocarbons, viruses and bacteria

More information

SECOTEC Refrigeration Dryers

SECOTEC Refrigeration Dryers Refrigeration ryers SECOTEC Refrigeration ryers ir flow 0.6 to m /min SECOTEC saves even more energy Separate condensate separator Operational reliability has hy do we need dry air? tmospheric air drawn

More information

Membrane Dryer. Air inflow rate KMM Series to m 3 /min

Membrane Dryer. Air inflow rate KMM Series to m 3 /min Membrane Dryer Air inflow rate KMM Series 0.08 to. m /min Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases that always contains water vapour.

More information

Screw Compressors HSD SERIES. Capacities from: 816 to 3002 cfm Pressures from: 80 to 217 psig

Screw Compressors HSD SERIES. Capacities from: 816 to 3002 cfm Pressures from: 80 to 217 psig Screw Compressors HSD SERIES Capacities from: 816 to 3002 cfm Pressures from: 80 to 217 psig What do you expect from a large compressor system? All compressed air users need a reliable air system and want

More information

Rotary Screw Compressors. SM Series With the world-renowned SIGMA PROFILE Flow rate 0.39 to 1.64 m³/min, Pressure 5.5 to 15 bar COMPRESSORS

Rotary Screw Compressors. SM Series With the world-renowned SIGMA PROFILE Flow rate 0.39 to 1.64 m³/min, Pressure 5.5 to 15 bar COMPRESSORS COMPRESSORS Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Flow rate 0.39 to 1.64 m³/min, Pressure 5.5 to 15 bar www.kaeser.com SM series Long-term savings Discerning compressed

More information

Dry-Running Rotary Screw Compressors

Dry-Running Rotary Screw Compressors Dry-Running Rotary Screw Compressors 2-Stage, Free air delivery up to 1 m 3 /min, Pressure,, and bar The new dimension in oil-free compression With logical component layout and exceptional attention to

More information

Reciprocating Compressors AIRBOX / AIRBOX CENTER

Reciprocating Compressors AIRBOX / AIRBOX CENTER www.kaeser.com Reciprocating Compressors / Flow rate.25 to.9 m³/min, Pressure 7 1 12.5 bar What do users expect from a reciprocating compressor? he answer: hey expect maximum efficiency and reliability.

More information

Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.15 to m³/min.

Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.15 to m³/min. Desiccant Dryers DC Series (Heatless regenerated) Air flow rates.5 to 5.5 m³/min www.kaeser.com Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases

More information

Rotary Screw Compressors. SK Series With the world-renowned SIGMA PROFILE Flow rate 0.53 to 2.70 m³/min, Pressure 5.5 to 15 bar

Rotary Screw Compressors. SK Series With the world-renowned SIGMA PROFILE Flow rate 0.53 to 2.70 m³/min, Pressure 5.5 to 15 bar Rotary Screw Compressors SK Series With the world-renowned SIGMA PROFILE Flow rate 0.53 to 2.70 m³/min, Pressure 5.5 to bar www.hpccompressors.co.uk SK series Quiet, dependable performance Discerning compressed

More information

Rotary Screw Compressors. SM Series With the world-renowned SIGMA PROFILE Flow rate 0.39 to 1.64 m³/min, Pressure 5.5 to 15 bar COMPRESSORS

Rotary Screw Compressors. SM Series With the world-renowned SIGMA PROFILE Flow rate 0.39 to 1.64 m³/min, Pressure 5.5 to 15 bar COMPRESSORS COMPRESSORS Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Flow rate 0.39 to 1.64 m³/min, Pressure 5.5 to 15 bar www.hpccompressors.co.uk SM series Long-term savings Quiet and

More information

Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Free air delivery 0.28 to 1.52 m³/min, pressures 5.

Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Free air delivery 0.28 to 1.52 m³/min, pressures 5. www.hpccompressors.co.uk p Rotary Screw Compressors SM Series With the world-renowned SIGMA PROFILE Free air delivery 0. to.5 m³/min, s 5.5 to 5 bar SM Series Quiet, dependable performance SM Long-term

More information

Rotary Screw Compressors SX Series With the world-renowned SIGMA PROFILE Free air delivery from 0.26 to 0.81 m³/min, Pressure 5.

Rotary Screw Compressors SX Series With the world-renowned SIGMA PROFILE Free air delivery from 0.26 to 0.81 m³/min, Pressure 5. Rotary Screw Compressors SX Series With the world-renowned SIGMA PROFILE Free air delivery from 0.26 to 0.81 m³/min, Pressure 5.5-15 bar SX Series SX Compact and powerful Today s users expect maximum availability

More information

Membrane Dryers KMM Series

Membrane Dryers KMM Series www.kaeser.com Membrane Dryers KMM Series Flow volume at inlet up to.0 m /min Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases that always contains

More information

Refrigeration Dryers SECOTEC Air flow rate 0.6 to 25 m³/min

Refrigeration Dryers SECOTEC Air flow rate 0.6 to 25 m³/min Refrigeration Dryers Air flow rate 0.6 to 5 m³/min SECOTEC refrigeration dryers SECOTEC refrigeration dryers reliably remove the moisture from compressed air while minimising energy consumption. They feature

More information

Membrane Dryers KMM Series

Membrane Dryers KMM Series www.kaeser.com Membrane Dryers KMM Series Flow volume at inlet up to. m /min Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases that always contains

More information

Screw Compressors. HSD Series. Capacities from: 816 to 3044 cfm Pressures from: 80 to 217 psig

Screw Compressors. HSD Series. Capacities from: 816 to 3044 cfm Pressures from: 80 to 217 psig Screw Compressors HSD Series Capacities from: 816 to 3044 cfm Pressures from: 80 to 217 psig HSD Series Built for a lifetime. Kaeser s HSD compressors are engineered to be the cornerstone of any demanding

More information

SECOTEC Refrigeration Dryers Air flow rate 0.6 to 25 m 3 /min.

SECOTEC Refrigeration Dryers Air flow rate 0.6 to 25 m 3 /min. SECOTEC Refrigeration ryers ir flow rate.6 to m /min www.kaeser.com hy is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases that always contains water

More information

Rotary Screw Compressors SXC»Compact«Series

Rotary Screw Compressors SXC»Compact«Series Rotary Screw Compressors SXC»Compact«Series With the world-renowned SIGMA PROFILE Free air delivery.6 to. m³/min, Pressure 1 bar SXC Series The compact integrated air system SXC integrated compressed air

More information

Rotary Screw Compressors. ASD Series With the world-renowned SIGMA PROFILE Flow rate 0.89 to 6.39 m³/min, Pressure 5.5 to 15 bar COMPRESSORS

Rotary Screw Compressors. ASD Series With the world-renowned SIGMA PROFILE Flow rate 0.89 to 6.39 m³/min, Pressure 5.5 to 15 bar COMPRESSORS COMPRESSORS Rotary Screw Compressors ASD Series With the world-renowned SIGMA PROFILE Flow rate 0.89 to 6.39 m³/min, Pressure 5.5 to 15 bar www.kaeser.com ASD Series ASD Even more efficient KAESER KOMPRESSOREN

More information

Refrigeration Dryers SECOTEC Air fl ow rate 0.6 to 14.3 m³/min

Refrigeration Dryers SECOTEC Air fl ow rate 0.6 to 14.3 m³/min Refrigeration Dryers Air fl ow rate 0.6 to. m³/min Energy savings all day, every day, SECOTEC refrigeration dryers SECOTEC refrigeration dryers reliably remove the moisture from compressed air while minimising

More information

Rotary Screw Compressors. CSD(X) Series With the world-renowned SIGMA PROFILE Flow rate 1.1 to 17.5 m³/min, Pressure 5.5 to 15 bar COMPRESSORS

Rotary Screw Compressors. CSD(X) Series With the world-renowned SIGMA PROFILE Flow rate 1.1 to 17.5 m³/min, Pressure 5.5 to 15 bar COMPRESSORS COMPRESSORS Rotary Screw Compressors CSD(X) Series With the world-renowned SIGMA PROFILE Flow rate 1.1 to 17.5 m³/min, Pressure 5.5 to 15 bar www.kaeser.com CSD / CSDX Series CSD(X) Even more efficient

More information

Rotary Blowers COMPACT Series With the world-renowned OMEGA PROFILE Air delivery 0.5 to 93 m 3 /min Pressure up to 1000 mbar, Vacuum to 500 mbar

Rotary Blowers COMPACT Series With the world-renowned OMEGA PROFILE Air delivery 0.5 to 93 m 3 /min Pressure up to 1000 mbar, Vacuum to 500 mbar www.kaeser.com Rotary Blowers COMPACT Series ith the world-renowned OMEGA PROFILE Air delivery 0.5 to 93 m 3 /min Pressure up to 1000 mbar, Vacuum to 500 mbar Rotary blower investment: It s the total costs

More information

Spiralair SPR 2-30 TECHNOLOGY YOU CAN TRUST

Spiralair SPR 2-30 TECHNOLOGY YOU CAN TRUST Spiralair SPR 2-30 Oil-free compressors Industries such as pharmaceuticals, food and beverage, electronics and textiles cannot risk any chance of oil contamination in their processes. Therefore, it is

More information

Screw Compressors HSD SERIES. Capacities from: 816 to 3044 cfm Pressures from: 80 to 217 psig

Screw Compressors HSD SERIES. Capacities from: 816 to 3044 cfm Pressures from: 80 to 217 psig Screw Compressors HSD SERIES Capacities from: 816 to 30 cfm Pressures from: 80 to 217 psig Built for a lifetime Maximum efficiency and reliability have long been synonymous with Kaeser Compressors. Our

More information

Oil-injected rotary screw compressors GA GA

Oil-injected rotary screw compressors GA GA Oil-injected rotary screw compressors GA 15-26 GA 11 + -30 Meeting your every need for compressed air Atlas Copco's GA oil-injected screw compressors provide you with industry-leading performance and reliability

More information

Screw Compressors ESD SERIES. Capacities from: 816 to 1522 cfm Pressures from: 80 to 217 psig

Screw Compressors ESD SERIES. Capacities from: 816 to 1522 cfm Pressures from: 80 to 217 psig Screw Compressors ESD SERIES Capacities from: 816 to 1522 cfm Pressures from: 80 to 217 psig Built for a lifetime Maximum efficiency and reliability have long been synonymous with Kaeser Compressors. Our

More information

N Series. Initial pressure up to 13 bar Final pressure up to 45 bar Air delivery m³/min

N Series. Initial pressure up to 13 bar Final pressure up to 45 bar Air delivery m³/min N Series Initial up to 3 bar Final up to 5 bar delivery.7.5 m³/min Why do we need a booster? The ability to offer compressed air at various s makes it one of the most versatile energy sources available.

More information

Screw Compressors. AS Series. Capabilities from: 64 to 143 cfm Pressures from: 80 to 217 psig. kaeser.com

Screw Compressors. AS Series. Capabilities from: 64 to 143 cfm Pressures from: 80 to 217 psig. kaeser.com Screw Compressors AS Series Capabilities from: 64 to 143 cfm Pressures from: 80 to 217 psig kaeser.com AS Series Built for a lifetime. Kaeser Compressors has pushed the boundaries of compressed air efficiency

More information

Refrigeration Dryers SECOTEC Flow rate 0.6 to 14.3 m³/min

Refrigeration Dryers SECOTEC Flow rate 0.6 to 14.3 m³/min Refrigeration Dryers Flow rate 0.6 to. m³/min Energy savings all day, every day SECOTEC refrigeration dryers SECOTEC refrigeration dryers reliably remove the moisture from compressed air while minimising

More information

Combination Dryer HYBRITEC

Combination Dryer HYBRITEC Combination Dryer HYBRITEC Flow rate 12.0 to 150.0 m³/min HYBRITEC In a Class of their Own HYBRITEC compressed air dryers combine the energy-saving functionality of modern refrigeration dryers with the

More information

ROTARY SCREW COMPRESSOR CSA 5,5-7, HP

ROTARY SCREW COMPRESSOR CSA 5,5-7, HP ROTARY SCREW COMPRESSOR CSA 5,5-7,5-10 - 15-20 HP Technology and Performance High performance, silent running, simple installation and maintenance, makes the CSA compressor belong to the top class models

More information

Compressed air preparation Compressed air storage Moisture management. Catalog #1

Compressed air preparation Compressed air storage Moisture management. Catalog #1 Compressed air preparation Compressed air storage Moisture management Catalog #1 This Catalogue is valid from May 2015. All previous catalogues lose their validity with the publication of the new catalogue.

More information

Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.15 to m³/min.

Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.15 to m³/min. Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.5 to 54.53 m³/min www.hpccompressors.co.uk Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a

More information

Screw Compressors AS SERIES. Capacities from: 59 to 124 cfm Pressures from: 80 to 217 psig

Screw Compressors AS SERIES. Capacities from: 59 to 124 cfm Pressures from: 80 to 217 psig Screw Compressors AS SERIES Capacities from: 59 to 124 cfm Pressures from: 80 to 217 psig Rotary Screw Compressor Maximum Reliability and Efficiency For years, customers have relied on Kaeser for reliable

More information

Screw Compressors. S Series. Capacities from: 8.8 to 89 cfm Pressures from: 80 to 217 psig.

Screw Compressors. S Series. Capacities from: 8.8 to 89 cfm Pressures from: 80 to 217 psig. Screw Compressors S Series Capacities from: 8.8 to 89 cfm Pressures from: 80 to 217 psig www.kaeser.com SX, SM, and SK Series Built for a lifetime. Kaeser Compressors SX, SM, and SK series of rotary screw

More information

Atlas Copco Stationary Air Compressors. GA30-90C WorkPlace Air System TM 30-90kW/40-125HP oil-injected rotary screw compressors

Atlas Copco Stationary Air Compressors. GA30-90C WorkPlace Air System TM 30-90kW/40-125HP oil-injected rotary screw compressors Atlas Copco Stationary Air Compressors GA30-90C WorkPlace Air System TM 30-90kW/40-125HP oil-injected rotary screw compressors Introducing the WorkPlace Air System The only compressed air system that can

More information

Dry-Running Rotary Screw Compressors. Two-stage, Free air delivery up to 51 m 3 /min, Pressure 4, 6, 8 and 10 bar

Dry-Running Rotary Screw Compressors. Two-stage, Free air delivery up to 51 m 3 /min, Pressure 4, 6, 8 and 10 bar Dry-Running Rotary Screw Compressors Two-stage, Free air delivery up to 51 m 3 /min, Pressure,, and bar The new dimension in oil-free compression Two-stage dry-running KAESER rotary screw compressors not

More information

Rotary Screw Compressors SX HS Series. With the world-renowned SIGMA PROFILE

Rotary Screw Compressors SX HS Series. With the world-renowned SIGMA PROFILE Rotary Screw Compressors SX HS Series With the world-renowned SIGMA PROFILE The global compressed air systems provider was established in 99 as a machine workshop, but started on the road to becoming one

More information

Dry-Running Rotary Screw Compressors. CSG-2 Series Two-stage, Flow rate up to 13.5 m³/min, Pressure 4, 6, 8 and 10 bar.

Dry-Running Rotary Screw Compressors. CSG-2 Series Two-stage, Flow rate up to 13.5 m³/min, Pressure 4, 6, 8 and 10 bar. Dry-Running Rotary Screw Compressors CSG-2 Series Two-stage, Flow rate up to 13.5 m³/min, Pressure,, and bar www.kaeser.com CSG-2 series Innovation Quality KAESER Two-stage dry-running KAESER rotary screw

More information

INDUSTRIALS GROUP. Refrigerant Dryers. Innovative Compressed Air Treatment Solutions GDD Series

INDUSTRIALS GROUP. Refrigerant Dryers. Innovative Compressed Air Treatment Solutions GDD Series INDUSTRIALS GROUP Refrigerant Dryers Innovative Compressed Air Treatment Solutions GDD Series GARDNER DENVER COMPRESSED AIR TECHNOLOGIES High performance, optimum efficiency Why is compressed air processed?

More information

Refrigeration dryers for energy efficient compressed air quality

Refrigeration dryers for energy efficient compressed air quality 01 GB Refrigeration dryers for energy efficient compressed air quality Energy efficient compressed air treatment F-HS series Innovative, energy efficient refrigerant dryers CompAir guaranteed long-term

More information

Screw Compressors SM SERIES. Capacities from: 16 to 54 cfm Pressures from: 80 to 217 psig

Screw Compressors SM SERIES. Capacities from: 16 to 54 cfm Pressures from: 80 to 217 psig Screw Compressors SM SERIES Capacities from: 16 to 54 cfm Pressures from: 80 to 217 psig Rotary Screw Compressor Maximum Reliability and Efficiency For years, customers have depended on Kaeser for reliable

More information

EG Series Screw Air Compressors Life source of industries kw

EG Series Screw Air Compressors Life source of industries kw EG Series Screw Air Compressors Life source of industries 90-160 kw EG Series ELGi, established in 1960, designs and manufactures a wide range of compressors. The company has gained its reputation for

More information

Atlas Copco. Oil-injected Rotary Screw Compressors Variable Speed Drive + (7-15 kw/10-20 hp)

Atlas Copco. Oil-injected Rotary Screw Compressors Variable Speed Drive + (7-15 kw/10-20 hp) Atlas Copco Oil-injected Rotary Screw Compressors Variable Speed Drive + (7-15 kw/10-20 hp) Extreme savings No idling time Silent operation Small footprint The new revolutionary compressor from Atlas Copco

More information

Atlas Copco. Heat-of-compression rotary drum dryers ND series ( l/s, cfm)

Atlas Copco. Heat-of-compression rotary drum dryers ND series ( l/s, cfm) Atlas Copco Heat-of-compression rotary drum dryers ND series (1000-2500 l/s, 2290-5297 cfm) Cost-effective dry air for your application Dry and clean compressed air is essential for a broad range of industrial

More information

ROTARY SCREW COMPRESSORS

ROTARY SCREW COMPRESSORS 03 ROTARY SCREW COMPRESSORS FIXED SPEED REGULATED SPEED (RS) L-AIRSTATION L07 L22 L07RS L22RS INTELLIGENT AIR TECHNOLOGY ADVANCED DESIGN FIXED & REGULATED SPEED TECHNOLOGY NEW FULLY INTEGRATED AIREND The

More information

Global Series Screw Air Compressors Life source of industries

Global Series Screw Air Compressors Life source of industries Global Series Screw Air Compressors Life source of industries 125-200 HP series Global Series Elgi, established in 1960, designs and manufactures a wide range of compressors. The company has gained its

More information

High Efficiency Compressed Air Dryers. Adsorption Dryers Classical System INTELLIGENT AIR TECHNOLOGY

High Efficiency Compressed Air Dryers. Adsorption Dryers Classical System INTELLIGENT AIR TECHNOLOGY 02 High Efficiency Compressed Air Dryers Adsorption Dryers Classical System INTELLIGENT AIR TECHNOLOGY Heatless Regenerative Adsorption Dryers A18TX - A930TX and A18TXA - A157TXA Compressed air purification

More information

Adsorption Dryers. AD 7 to 1300

Adsorption Dryers. AD 7 to 1300 D dsorption Dryers D 7 to 300 LUP Driven by technology. Designed by experience. lup Kompressoren has over 85 years of industrial experience. It is our ambition to offer compressed air solutions that ensure

More information

Refrigeration Dryers TG TI Series

Refrigeration Dryers TG TI Series Refrigeration Dryers TG TI Series Flow rate 30.8 to 90 m³/min TG TI series Energy-saving refrigeration dryers Most compressed air applications require dried compressed air with a pressure dew point of

More information

DBS, EBS, FBS Series

DBS, EBS, FBS Series Screw Blowers DBS, EBS, FBS Series With the world-renowned SIGMA PROFILE Flow rate 6 to 67 m³/min, Pressure differential up to 1.1 bar www.kaeser.com DBS, EBS, FBS series The rotors in KAESER KOMPRESSOREN

More information

Atlas Copco Oil-injected Rotary Screw Compressors GA 15-22/GA /GA VSD (11-30 kw/15-40 hp)

Atlas Copco Oil-injected Rotary Screw Compressors GA 15-22/GA /GA VSD (11-30 kw/15-40 hp) Atlas Copco Oil-injected Rotary Screw Compressors GA 15-22/GA 11 + -30/GA 15-30 VSD (11-30 kw/15-40 hp) Total capability, total responsibility Right at the heart of your business, Atlas Copco delivers

More information

Rail vehicles without compressed air? Practically inconceivable!

Rail vehicles without compressed air? Practically inconceivable! Rail vehicles must have a reliable braking system. They generally use compressed air, which is generated by screw compressors. Photo: Fotolia / VRD Rail vehicles without compressed air? Practically inconceivable!

More information

Rotary Screw Compressors. ESD Series With the world-renowned SIGMA PROFILE Flow rate 5.0 to 45.0 m³/min, Pressure 5.5 to 15 bar.

Rotary Screw Compressors. ESD Series With the world-renowned SIGMA PROFILE Flow rate 5.0 to 45.0 m³/min, Pressure 5.5 to 15 bar. Rotary Screw Compressors ESD Series With the world-renowned SIGMA PROFILE Flow rate 5.0 to 45.0 m³/min, Pressure 5.5 to 15 bar www.kaeser.com ESD series KAESER KOMPRESSOREN pushes the boundaries of compressed

More information

NEW INTELLIGENT AIR TECHNOLOGY

NEW INTELLIGENT AIR TECHNOLOGY L Series L07 L11 (10 15 HP) Rotary Screw Compressors NEW INTELLIGENT AIR TECHNOLOGY L07 L11 ROTARY SCREW COMPRESSORS The L Series oil injected rotary screw compressors provide a range that combines high

More information

Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.15 to m³/min.

Desiccant Dryers DC Series (Heatless regenerated) Air flow rates 0.15 to m³/min. Desiccant Dryers DC Series (Heatless regenerated) Air flow rates.5 to 54.53 m³/min www.kaeser.com Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of

More information

Global Series Screw Air Compressors Life source of industries HP

Global Series Screw Air Compressors Life source of industries HP Global Series Screw Air Compressors Life source of industries - 200 HP ELGi, established in 1960, designs and manufactures a wide range of compressors. The company has gained its reputation for design

More information

Reliability & efficiency without compromise

Reliability & efficiency without compromise 01 GB Reliability & efficiency without compromise Rotary Screw Compressors Premium compressor design L50, L80, L140 First-class efficiency Efficiency Leader The L-Series from CompAir Well known in the

More information

Oil-free compression rotary screw compressors. CSG-2, DSG-2, FSG-2 Series Flow rate up to 51 m³/min, Pressure 4 to 10 bar.

Oil-free compression rotary screw compressors. CSG-2, DSG-2, FSG-2 Series Flow rate up to 51 m³/min, Pressure 4 to 10 bar. Oil-free compression rotary screw compressors CSG-2, DSG-2, FSG-2 Series Flow rate up to 51 m³/min, Pressure to bar www.kaeser.com Durable and clean-running for sensitive processes Two-stage, oil-free

More information

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA / GA / GA VSD (11-37 kw/20-50 hp)

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA / GA / GA VSD (11-37 kw/20-50 hp) OIL-INJECTED ROTARY SCREW COMPRESSORS GA 5- / GA + - + / GA VSD + 5-3 (-3 kw/-50 hp) MEETING YOUR EVERY NEED FOR COMPRESSED AIR Atlas Copco's GA oil-injected screw compressors provide you with industry-leading

More information

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 5-11 (5,5-11 kw/7,5-15 hp)

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 5-11 (5,5-11 kw/7,5-15 hp) OIL-INJECTED ROTARY SCREW COMPRESSORS GA 5- (5,5- kw/7,5- hp) Highest reliability THE ULTIMATE SMART SOLUTION THAT FITS Atlas Copco s GA compressors bring outstanding performance, flexible operation and

More information

Largo & Allegro. Air Compressors LARGO & ALLEGRO

Largo & Allegro. Air Compressors LARGO & ALLEGRO Largo & Allegro Air Compressors LARGO 11-22 & ALLEGRO 15-22 Alup Driven by technology. Designed by experience. Alup Kompressoren has over 85 years of industrial experience. It is our ambition to offer

More information

ADSORPTION DRYING: WHY?

ADSORPTION DRYING: WHY? ADSORPTION DRYERDB ADSORPTION DRYING: WHY? Modern industries require compressed air that is increasingly filtered with low dew point and condensate. Today, the equipment is more sophisticated as there

More information

Screw Compressors ESN Fixed Speed & VS 250 Variable Speed

Screw Compressors ESN Fixed Speed & VS 250 Variable Speed Screw Compressors ESN 160-250 Fixed Speed & VS 250 Variable Speed Rely on GD to provide the perfect fit Built for 24/7 use in demanding applications Gardner Denver designed the ESN 160-250 and VS250 series

More information

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 5-11 (5,5-11 kw/7,5-15 hp)

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 5-11 (5,5-11 kw/7,5-15 hp) OIL-INJECTED ROTARY SCREW COMPRESSORS GA 5- (5,5- kw/7,5- hp) THE ULTIMATE SMART SOLUTION THAT FITS Atlas Copco s GA compressors bring outstanding performance, flexible operation and high productivity,

More information

RN SERIES REFRIGERATED COMPRESSED AIR DRYERS NON-CYCLING REFRIGERATEDERATED COMPRESSED AIR DRYERS SCFM

RN SERIES REFRIGERATED COMPRESSED AIR DRYERS NON-CYCLING REFRIGERATEDERATED COMPRESSED AIR DRYERS SCFM RN SERIES REFRIGERATED COMPRESSED AIR DRYERS NON-CYCLING REFRIGERATEDERATED COMPRESSED AIR DRYERS 10-30000 SCFM SOME COMPANIES ARE FOUNDED ON HARD WORK. OTHERS ARE FOUNDED ON IDEALS. FS-CURTIS WAS FOUNDED

More information

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 7-37 VSD+ (7-37 kw/10-50 hp)

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 7-37 VSD+ (7-37 kw/10-50 hp) OIL-INJECTED ROTARY SCREW COMPRESSORS GA - VSD+ (- kw/- hp) Small compressor, big ideas Atlas Copco has turned the compressed air industry on its head by redesigning the conventional layout of a typical

More information

Largo & Allegro. Air Compressors. Largo & Allegro 31-90

Largo & Allegro. Air Compressors. Largo & Allegro 31-90 Largo & Allegro Air Compressors Largo & Allegro 31-90 ALUP Driven by technology. Designed by experience. ALUP Kompressoren has over 85 years of industrial experience. It is our ambition to offer compressed

More information

Atlas Copco. Oil-sealed rotary screw vacuum pumps GVS , cfm

Atlas Copco. Oil-sealed rotary screw vacuum pumps GVS , cfm Atlas Copco Oil-sealed rotary screw vacuum pumps GVS 30-400, 35-3000 cfm Reliable general vacuum for critical applications Atlas Copco, the industry leader in compressed air solutions, has transferred

More information

High Efficiency Compressed Air Dryers. Adsorption Dryers Classical System INTELLIGENT AIR TECHNOLOGY

High Efficiency Compressed Air Dryers. Adsorption Dryers Classical System INTELLIGENT AIR TECHNOLOGY High Efficiency Compressed Air Dryers Adsorption Dryers Classical System INTELLIGENT AIR TECHNOLOGY Heatless Regenerative Adsorption Dryers A18TX A930TX and A18TXA A157TXA Compressed air purification equipment

More information

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 7-75 VSD+ (7-75 kw/ hp)

OIL-INJECTED ROTARY SCREW COMPRESSORS. GA 7-75 VSD+ (7-75 kw/ hp) OIL-INJECTED ROTARY SCREW COMPRESSORS GA - VSD (- kw/-0 hp) Innovative Atlas Copco has turned the compressed air industry on its head by redesigning the conventional layout of a typical air compressor.

More information

Reliability & efficiency without compromise

Reliability & efficiency without compromise 01 GB Reliability & efficiency without compromise Rotary Screw Compressors Premium compressor design L160 L290 L160RS L290RS Fixed & Regulated Speed Where reliability is key The L-Series from CompAir Well

More information

COMPRESSOR SYSTEMS MADE IN GERMANY G-DRIVE & V-DRIVE SCREW COMPRESSORS

COMPRESSOR SYSTEMS MADE IN GERMANY G-DRIVE & V-DRIVE SCREW COMPRESSORS COMPRESSOR SYSTEMS MADE IN GERMANY G-DRIVE & V-DRIVE SCREW COMPRESSORS 2 3 About ALMiG QUALITY AND INNOVATIONS MADE IN GERMANY. Decades of experience and excellent performance ALMiG is one of the leading

More information