AIR HEATING UNIT HEATMASTER ACJB INSTALLATION, OPERATION, MAINTENANCE AND SPARE PARTS
|
|
- Hubert Harmon
- 5 years ago
- Views:
Transcription
1 AIR HEATING UNIT HEATMASTER ACJB INSTALLATION, OPERATION, MAINTENANCE AND SPARE PARTS
2 2 Air Heating unit ACJB - Technical manual CONTENTS OPERATION AND MAINTENANCE (FOR USER) System, functions, main components...3 Control panel, operation... 4 Maintenance, filter replacement...5 INSTALLATION (FOR INSTALLER AND SERVICE PERSONNEL) Dismantling and installation of unit...6 Capacity data...6 Dimensions and weight... 7 Connection diagrams Unit with electric heater...8 Unit with water heater...9 Functions...10 Replacement of room temperature sensor (if applicable)...11 ADJUSTMENT, COMMISSIONING (FOR INSTALLER AND SERVICE PERSONNEL) Settings, Symbol descriptions...12 Parameter lists...13 MISCELLANEOUS Spare parts EC Declaration of Conformity...15 INFORMATION IN ACCORDANCE WITH ECODESIGN AND REGULATION EU 2016/2281. The ACJB is not B 1, C 2 or C 4 air heating unit. Type of fuel: Electricity. Capacity Other parameters Parameter Designation Value Unit Nominal heating capacity P rated, h 6.0 kw Minimum Capacity P min 0.0 kw Cover losses F env 1.9 % Emission efficiency h s, flow 96.6 % Seasonal efficiency for room heating h s, h 37.9 % WARNING! THE APPLIANCE MAY BE USED BY CHILDREN OVER THE AGE OF 8, PERSONS (INCLUDING CHILDREN) WITH PHYSICAL, SENSORY OR MENTAL DISABILITIES OR LACK OF KNOWLEDGE OR EXPERIENCE, PROVIDED THEY HAVE RECEIVED INSTRUCTION OR INFORMATION ON SAFE USE OF THE APPLIANCE AND UNDERSTAND THE POTENTIAL RISKS. CHILDREN MAY NOT PLAY WITH THE APPLIANCE. CHILDREN MAY NOT CLEAN OR PERFORM MAINTENANCE ON THE APPLIANCE WITHOUT SUPERVISION. NOTE! INSTALLATION, ADJUSTMENT AND COMMISSIONING AS DESCRIBED IN THESE INSTRUCTIONS MUST BE CARRIED OUT BY AN INSTALLER OR SERVICE PERSONNEL.
3 ! Air Heating unit ACJB - Technical manual 3 SYSTEM, FUNCTIONS, MAIN COMPONENTS OVERVIEW OF THE AIR HEATING SYSTEM Air heating unit ACJB Exhaust air Supply air Outdoor air Filter Fan Filter Extract air Toilet Bathroom Scullery Laundry room Kitchen (cooker hood) Filter Hallway or similar central area Fan Heater (water/electric) Warm supply air Other rooms to be heated Heat exchanger Control panel Heat recovery unit Secondary air THE UNIT S MAIN COMPONENTS 1. Coarse filter G3 2. Fine filter M5 3. Secondary air fan SYSTEM DESIGN An air heating system combines air-based heating and balanced ventilation with heat recovery. The heat recovery units can be installed in a kitchen, store room, scullery or attic. An air heating system uses the same ducts for ventilation and heating. CONTROL Control unit 5. Postheater (water/electrical) 6.Casing The control unit automatically controls the ACJB unit s fan and water or electric heater to maintain the desired temperature. SUMMER MODE During the summer months when there is no need for heating, summer mode can be activated. This reduces the fan operation to 30% after a set time delay (normally 24 hours). Summer mode is indicated by a LED on the control panel. Summer mode is automatically deactivated when there is a need for heating. SETTINGS The temperature, fan speed and other parameters are set in consultation with the installer/service personnel. ELECTRICAL DATA UNIT WITH ELECTRIC HEATING Voltage: 400 V, 3-phase, 50 Hz The electric heater operates in two stages: one stage with an output of 3 kw which is controlled steplessly via a pulser, and one fixed stage with an output of 3 kw which is controlled via a contactor. Fan motor Output, W Electric heater Output, W Rated output, W x 3,000 6,180 UNIT WITH WATER HEATING Voltage: 230 V, 1-phase, 50 Hz Fan motor output, W Rated output, W
4 4 Air Heating unit ACJB - Technical manual CONTROL PANEL RDKZ-41-1, OPERATION CONTROL PANEL RDKZ-41-1 SET DESIRED TEMPERATURE The temperature is set via control panel RDKZ Indicates tens (10 90) Indicates ones (1 9) Figure 1. Control panel RDKZ-41-1 with mains lead. The operating mode is selected via the external control panel RDKZ-41-1, which should be installed in a suitable place, either on a wall or in a wall box. Press the arrow button to select operating mode. The activated mode is indicated by a LED. SUMMER MODE NORMAL FORCED FILTER ALARM Each press reduces the set temperature by 1 C Saves the set temperature Each press raises the set temperature by 1 C Figure 3. Setting of desired temperature. 1. Check the current set temperature by pressing either the * or # button once. Then count how many times the NORMAL and FORCED symbols flash. Note that the NORMAL symbol indicates tens and the FORCED symbol indicates ones. Example: If the NORMAL symbol flashes twice and the FORCED symbol flashes three times, the temperature is currently set at 23º C. 2. To change the temperature, press * to reduce it or # to increase it. 3. After setting the desired temperature, press ARROW to save and return to normal mode on the control panel. SUMMER MODE NORMAL Arrow button (for selecting operating mode) FORCED Figure 2. Operating modes on control panel (RDKZ-41-1). NORMAL MODE The air heating unit automatically controls the fan speed to maintain the desired temperature. FORCED MODE The fan goes up to maximum flow. This function can be used to distribute surplus heat through the house, for instance if a heating stove is used. The unit operates in forced mode for 120 minutes, and then returns to NORMAL mode. If forced ventilation is required for only a short time, it can be terminated manually by pressing the arrow button and selecting NORMAL mode.
5 ! Air Heating unit ACJB - Technical manual 5 MAINTENANCE, FILTER REPLACEMENT MAINTENANCE Wipe the unit s casing clean with a cloth. Do not use solvents. The filter should normally be replaced every 6 months, but sometimes more frequent replacement is needed. A timer is set at six months, and the alarm light on the control panel flashes when it is time to replace the filter. To replace the filter, follow the steps below. REPLACEMENT OF FILTERS Power switch Alarm light Fine filter Coarse filter Figure 5. Location of filters in unit. Resetting of filter alarm Figure Switch off the unit with the power switch. 2. Open the filter hatch by turning the knobs. 3. Pull out the filters, see figure Insert new filters. 5. Close the filter hatch. 6. Start the unit. 7. Reset the filter alarm by pressing (*) for at least 10 seconds, see figure 4.
6 6 Air Heating unit ACJB - Technical manual DISMANTLING AND INSTALLATION, CAPACITY DISMANTLING AND INSTALLATION SECONDARY AIR FAN, AIRFLOW AND PRESSURE DROP Note that the ACJB air heating unit has duct spacers, mounting screw holes, electrical connections and, if applicable, a pipe connection for water heating that is the same as on the previous ACJ unit. 500 q, m 3 /h Disconnect the unit from the power supply by pulling out the plug or deactivating (removing) the fuse for the unit. 2. Disconnect the unit s duct connections and, if applicable, the pipe connections. 3. Disconnect the unit from the existing mounting studs, mounting brackets and/or silencer box. 4. If there is a room sensor, also disconnect the cables from the room sensor by opening the smaller front hatch and disconnecting them from the circuit board. 5. Dismantle the ACJ unit % 100% L wa, db 6. If necessary, clean the secondary air and supply air ducts. 7. Mount the new ACJB unit using the existing mounting devices. 70% Connect the ducts and any pipes. 9. Replace the existing room sensor (if applicable) with the room sensor supplied with the new unit % See page 9 for instructions. 10. Install control panel RDKZ-41-1 in a suitable place and connect it to the unit. 11. Switch on the power to the unit.! THE POWER SUPPLY MUST BE SWITCHED OFF WHILE CONTROL PANEL RDKZ-41-1 IS BEING INSTALLED/DISMANTLED. p s, Pa 100 Figure 6. 50% 40% q, l/s 68 To prevent the air flowing in the wrong direction during defrosting, it is recommended to connect a non-return damper between the heat recovery unit and the air heating unit. HEAT OUTPUT FOR UNIT WITH WATER HEATING P, W ,06 0,08 0,10 0,12 0,14 0,16 0,18 0,20 0,22 Figure 7. q w, l/s
7 Air Heating unit ACJB - Technical manual 7 DIMENSIONS AND WEIGHT DIMENSIONS AND WEIGHT Weight: 55 kg Ø160 Ø100 = = = = Ø Ø100 Ø120 Figure 8.
8 8 Air Heating unit ACJB - Technical manual CONNECTION DIAGRAMS UNIT WITH ELECTRIC HEATER N L1 L2 L3 Control panel N L1 Fan 0 V +10 V GT GT Supply air Return A2 1 3 A2 Contactor El. heater Contactor Pulser Pulser A1 2 4 A El. heater 2-ph. 3 kw M 4 3 A 2 1 El. heater 3-ph. 3 kw OK 1 Figure 9.
9 Air Heating unit ACJB - Technical manual 9 CONNECTION DIAGRAMS, CONT D. UNIT WITH WATER HEATING Power supply Blue Red Brown Valve Control panel TR 1 OK 1 Supply air GT Fan GT Return air Figure 10.
10 10 Air Heating unit ACJB - Technical manual FUNCTIONS, CONTROL ELECTRIC HEATER kw When the heating requirement increases, the output signal to the pulser increases within a range of 0-100%. When the output signal reaches 100%, if there is still a need for increased heating, the unit will go into plateau mode for a set time period (plateau time, default = 30 minutes). When the plateau time ends, the fan speed will increase steplessly from MIN to 60% and a new plateau time will start. When the plateau time ends, if there is still need for additional heating, the fixed heating stage of 3 kw will be activated via a contactor and the pulser will regulate the output down to 0%. After this, the pulser increases the output steplessly from 0 till 100% while the fan speed rises from 60% up to MAX. The heat and the fan speed are controlled in parallel. If there is a reduced heating requirement, the pulser will reduce the output from 100 to 0% while the fan speed drops from MAX to 60%. When the pulser reaches 0%, the system will wait for 60 seconds. After the 60 seconds, if there is still a reduced heating requirement, the fixed heating stage will be deactivated and the pulser regulates the output down from 100% to 0%. When the output drops below 75%, the fan speed will drop steplessly from 60% to MIN. HIGH SUPPLY AIR TEMPERATURE If the supply air temperature rises above 55 C, the pulser will immediately be deactivated. When the supply air temperature drops below 55 C, the pulser is immediately reactivated. If the supply air temperature rises above 65 C, the fixed heating stage will immediately be deactivated. When the supply air temperature drops below 65 C, the fixed heating stage is reactivated after 60 seconds. QUICK HEATING FUNCTION If the temperature setpoint is set to MAX (30 C), the fan speed and the temperature will immediately increase to 100%. This quick heating function is manual and has no automatic stop time or temperature limitation. When the desired temperature is reached, the setpoint should be reset manually (approx. 20 C). SUMMER MODE The SUMMER parameter (default = 0, off) is used to set the amount of time that elapses before Summer mode is activated when no heating is needed. The time delay is set in whole hours. The recommended value is 24 hours. When the set time (24 hours without a heating requirement) expires, the fan speed drops to 30% (fixed fan speed). Summer mode is indicated by a LED on the control panel (see figure 11). When the regulator signals a demand for heating (over 5%), Summer mode is deactivated and the fan resumes Normal mode. SUMMER MODE OVERHEATING The automatic overheating protection is activated when the heater reaches a temperature of 90 C and is deactivated at approx. 50 C. The automatic overheating protection only cuts the heat supply. The fan will continue operating. The manually resettable overheating protection is activated when the heater reaches a temperature of approx. 120 C and can be reset at approx. 75 C. The manually resettable overheating protection cuts both the heat supply and the fan function. No indication is shown on the control panel if the overheating protection has tripped. WATER HEATER When the heating requirement increases, the output signal to the pilot valve increases. When the output signal reaches 50%, if there is still a need for increased heating, the unit will go into plateau mode for a set time period (PLATEAU TIME, default =30 min.). When the plateau time ends, the fan speed will increase steplessly from MIN to MAX and the heating signal will simultaneously increase from 50% to MAX. The heat and the fan speed are controlled in parallel. If there is a reduced heating requirement, the control valve will regulate the output from 100 to 50% while the fan speed drops from MAX to MIN. After this, the output signal to the control valve will continue decreasing from 50% down to 0%. SETPOINT The setpoint can be set via the panel between +10 and +30 C. The setpoint is always saved automatically in EEPROM, regardless of whether it is changed via the parameter list or via quick setting. An external potentiometer (optional accessory) can be connected to the vacant temperature contact next to the two temperature sensors. The board automatically detects the connected potentiometer and reads the setpoint from it. The current setpoint can be read from the panel, but it cannot be changed from the panel. The potentiometer can be removed at any time, even while the power is switched on. If it is removed, the function will return to the panel (plug and play). FILTER ALARM The dirty filter alarm counts 180 days before the red light flashes. To acknowledge the alarm, depress the left button (star) for 10 seconds. The filter alarm is activated by default (parameter 7 = 1). The alarm can be deactivated (parameter 7 = 2). TEMPERATURE SENSOR MALFUNCTION If a temperature sensor becomes faulty, the heat supply will be blocked completely but the fan will continue operating. A temperature error will not be indicated. START-UP On start-up, the fan will run at maximum speed for 8 seconds and then run at NORMAL speed. Figure 11. Indication of SUMMER MODE.
11 ! Air Heating unit ACJB - Technical manual 11 REPLACEMENT OF ROOM TEMPERATURE SENSOR (IF APPLICABLE) If the old ACJ unit has a room temperature sensor, the sensor cannot be used in the new ACJB unit. A new room temperature sensor (optional accessory) must be installed in the new unit. 1. Disconnect the unit from the power supply. 2. Remove the old room sensor. 3. Connect the room temperature sensor to the existing room temperature cable from the old unit. 4. Connect the room temperature cable to the junction box on the short side of the unit (see figure 12). First remove the protective cover. Connect the ends of the cables, then reconnect the protective cover. 1 Figure 12. Junction box for cable from room temperature sensor. 5. On the control unit s terminal block, replace the cable from the temperature sensor in the unit s inlet with the cable coming out of the junction box on the short side of the unit (the cable from the new room temperature sensor) with the white marking. See figure Switch on the power to the unit. 2 Figure 13. Replacement of cable on the control unit s terminal block.
12 12 Air Heating unit ACJB - Technical manual SETTINGS, SYMBOL DESCRIPTIONS SETTINGS To change a parameter, follow the instructions below. Also see the parameter list and figure Always start from normal operating mode. 2. Activate reading mode by depressing * and # simultaneously for about 3 seconds. The parameter number is illustrated by the number of times the alarm symbol flashes. See the parameter list provided. 3. Switch between the parameters by pressing * (previous) and # (next). 4. To change a current parameter s value, depress * and # simultaneously again for roughly 3 seconds until the alarm light is steadily illuminated. 5. The parameter value can now be adjusted by pressing * (reduce) and # (increase). The parameter value is illustrated by the number of times the green LEDs flash (see table 16). 6. Confirm the change by pressing the ARROW button. 7. To change more parameters, repeat the procedure above. To restore the factory settings, depress * and # simultaneously for more than 15 seconds. When all the LEDs flash simultaneously, confirm the reset by pressing the arrow button. Note: If you do not press the arrow button, only the setpoint will be reset to 20 C. Lowers the set value in programming mode Figure 14 Symbols on display Raises the set value in programming mode Arrow button (CONFIRM/SAVE) NOTE! THE MINIMUM FAN SPEED MUST BE INCREASED DEPENDING ON THE SIZE OF THE HOME. AMONG OTHER THINGS, THIS PREVENTS THE OVERHEATING PROTECTION FROM TRIPPING. SYMBOL DESCRIPTION FOR CONTROL PANEL RDKZ-41-1 WHEN MAKING ADJUSTMENTS Symbol Reading mode Adjustment mode The number of times the alarm symbol flashes indicates which parameter is displayed. See the parameter list below. Steady illumination indicates that adjustment mode is active and that the current parameter value can be changed A flashing light indicates hundreds A flashing light indicates tens A flashing light indicates tens A flashing light indicates ones A flashing light indicates ones Table 15.
13 Air Heating unit ACJB - Technical manual 13 PARAMETER LISTS ELECTRIC HEATER kw Parameter Function Setting Factory setting 1 Setpoint value supply air C Current temperature supply air C Display 3 Current temperature secondary air C Display 4 Summer mode 0=no 1-255=number of hrs before activation Adjustment MIN speed in % Adjustment MAX speed in % Filter alarm 1=Yes 2=No Plateau time in minutes before changing the fan speed and heat output Internal function 10 P-band multiplier Int action time 1=5min Current register value Display 13 Current bit information Display WATER HEATER Parameter Function Setting Factory setting 1 Setpoint value supply air C Filter alarm 1=Yes 2=No Adjustment MIN speed in % Adjustment MAX speed in % Current temperature supply air C Display 6 Current temperature extract air C Display 7 P-band multiplier Int.action time 1=5 min P-band VA multiplier (not used) Int. action time VA 1=5 min. (not used) Range Plateau time in minutes before changing the fan speed and heat output 13 Summer mode (not used) Control type electric/water (not used)
14 ! 14 Air Heating unit ACJB - Technical manual REPLACEMENT PARTS Pos. Designation Name Included in Quantity 1 ACJZ-01 Coarse filter ACJB, G3 ACJB 5 1 ACJZ-02 Fine filter ACJB, M5 ACJB 2 1 ACJZ-03 Filter kit ACJB, G3 + M5 ACJB 1 2 ACJB Fan, complete EC 175 W ACJB 1 3 ACJB Control board, electric heater kw ACJB-aa-b-c-1-e 1 3 ACJB Control board, electric heater 6 kw ACJB-aa-b-c-1-e 1 3 ACJB Control board, water heater ACJB-aa-b-c-5-e 1 4 ACJB Temperature sensor kit, 1+1 ACJB 1 5 CPDC Switch ACJB 5 6 ACJB Electric heater kw ACJB-aa-b-c-1-e 1 6 ACJB Electric heater 6 kw *) (conversion kit kw) ACJB-aa-b-c-1-e 1 6 ACJB Water heater ACJB-aa-b-c-5-e 1 7 ACJB Pulser ACJB-aa-b-c-1-e 1 8 ACJB Contactor ACJB-aa-b-c-1-e 1 9 ACJB Valve actuator ACJB-aa-b-c-5-e 1 10 ACJB Transformer 230/24V ACJB-aa-b-c-5-e 1 *) Electric heater 6 kw has been discontinued. It has been replaced with electric heater kw including conversion kit. If the supply cord is damaged, it must be replaced by the manufacturer, an authorised service firm or a similarly qualified professional in order to avoid hazard.
15
16 FG_DC_9170GB_Heatmaster ACJB_IN-MA-CM-SP_ _R1 Copyright 2018 FläktGroup J HEATMASTER ACJB FläktGroup is the European market leader in smart, energy-efficient ventilation systems for optimal indoor comfort, critical applications and fire safety. Our products and solutions are based on innovative technology, high quality and superior performance, backed by over 100 years of experience in the industry. With the market s widest range of products and strong market presence in 65 countries worldwide, we are always close to you with a clear focus on delivering Excellence in Solutions. FLÄKTGROUP PRODUCT AREAS Air Treatment Air Movement Air Distribution Chilled Beams & Chilled Beam Cassettes Air FiltrationAir Management & ATDs Air Conditioning & Heating Control Service» Learn more on or contact one of our offices
Heat recovery unit RDKS
Heat recovery unit RDKS Heat recovery unit RDAS is based on our RDAR unit and develops this further. The unit has a rotary heat exchanger with stepless speed control. This allows for very precise temperature
More informationHEAT RECOVERY UNIT MINIMASTER RDKS INSTALLATION, OPERATION, MAINTENANCE AND SPARE PARTS
HEAT RECOVERY UNIT MINIMASTER RDKS INSTALLATION, OPERATION, MAINTENANCE AND SPARE PARTS 2 Heat recovery unit RDKS - Technical manual CONTENTS OPERATION AND MAINTENANCE (FOR USER) Functions, system design,
More informationMODBUS RS485 TECHNICAL INSTRUCTIONS
MODBUS RS485 TECHNICAL INSTRUCTIONS 2 Modbus RS485 - Technical instruction DESCRIPTION, CONNECTIONS, PRESENTATION, DECIMALS DESCRIPTION RS485 has two connections, A and B. Often there is also a protective
More informationAir Handling Unit. REC Temovex Blue 4 NEW! Experts on indoor climate in low-energy houses
NEW! REC Temovex Blue 4 Experts on indoor climate in low-energy houses REC Temovex Blue 4 Third generation of our Temovex units! - Dual counterflow heat exchangers with over 9% efficiency * - SFP < 1,
More informationKITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE
KITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE 2 GLEC-6 - Installation and maintenance CONTENTS 1 Important information... 3 2 Safety notes... 3 3 Technical description...4 4 Transport... 6 5
More informationA B C D E F 2
HOOD RS600 A B C D E F 2 3 4 7 11 EN DECORATIVE EXTRACTOR HOOD Dear Customer, Thank you for buying our hood. Please read these instructions carefully for its optimum installation, use and maintenance.
More informationService Information. WNes 2956 appliance documentation. Service Information no. 27/2004 LHG/TKD-Fe/June SI
After Sales Service International Service Information Service Information no. 27/2004 LHG/TKD-Fe/June 2004 WNes 2956 appliance documentation Page 1/26 Contents 2.0. Extract from Operating Instructions
More informationPORTABLE AIR CONDITIONER
PORTABLE AIR CONDITIONER Model: PEL00460 1 CONTENTS Page No. Details 2 Important Safety Information 3 Product Overview 3 Positioning & Installation 4 Installation Errors 4 Control Panel 5 Screen IMPORTANT
More informationAC500T, AC1000T, AC1500T, AC2000T
Product Instruction Manual Accona AC500T, AC1000T, AC1500T, AC2000T Panel heater V18.4,1 Version 3.2 Jan 2015 Thank you for purchasing a Hyco Accona panel heater. Please ensure you read and understand
More informationSmart Smart IR. Service instruction SALES DATE MANUFACTURED ON (DATE): APPROVAL MARK SOLD. model (check applicable) is recognized as serviceable
Smart Smart IR model (check applicable) is recognized as serviceable Service instruction SALES DATE MANUFACTURED ON (DATE): SOLD APPROVAL MARK SMART-EN-04 BLAUBERG Company is happy to offer your attention
More informationAir handling unit. REC Temovex 400S-EC-RS. Experts on indoor climate in low-energy houses
REC Temovex 4S-EC-RS Experts on indoor climate in low-energy houses RT 4S-EC-RS REC Temovex 4S-EC-RS ECO2 control system for low-energy and passive houses Comprises: - Air flow boost for warm and cold
More informationHOTEL CHILLED BEAM IQ STAR SILENCIA
HOTEL CHILLED BEAM IQ STAR SILENCIA TECHNICAL CATALOGUE 2 IQ Star Silencia Hotel Chilled beam - Technical catalogue IQ STAR SILENCIA HOTEL CHILLED BEAM Silencia unit is designed for use in hotel bedrooms,
More informationINDUCTION COOKER MODEL: EIC-G1810(BK) Owner s Manual. Please read this manual carefully before operating your set. Retain it for future reference.
INDUCTION COOKER MODEL: EIC-G1810(BK) Owner s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the
More informationManual for the installation, use and maintenance of decorative hoods
EN Manual for the installation, use and maintenance of decorative hoods A B C D E F 3 4 5 2 4 1 3 2 4 P1 1 3 1 2 23 24 25 26 7 P2 6 21 2 23 24 25 4 P3 1 2 3 4 5 P4 7 8 IMPORTANT Never leave frying food
More informationSilencer Preheater unit Electric post-heating unit Water circulated post-heating unit CO 2 sensor %RH sensor Pressure difference switch LON converter
VALLOX Product Code: 3158400 L 3158410 R SILENCER (OPTIONAL) INSTRUCTIONS FOR USE AND MAINTENANCE WATER CIRCULATED POST-HEATING UNIT (OPTIONAL) ELECTRIC POST-HEATING UNIT (OPTIONAL)) PREHEATER (OPTIONAL)
More informationInstallation manual Mori HR
G G Installation manual Mori HR Read this manual carefully before using the product and keep it in a safe place for reference. This product was constructed up to standard and in compliance with regulations
More informationLaboratory Airflow Monitors & Controls TYPE C STANDARD & NIGHT SETBACK LED & DIGITAL - VAV SYSTEMS
TYPE C STANDARD & NIGHT SETBACK S Specifications and Owner s Manual PLASTEC VENTILATION, INC. TYPE C STANDARD & NIGHT SETBACK General Description BENEFITS Safety: air flow is maintained at required speed
More informationFlexit air handling units C2 and UNI 2, 3,4
Flexit handling units C2 and UNI 2, 3,4 energy efficient ventilation for a healthy indoor environment A FOR A HEALTHY INDOOR ENVIRONMENT Energy-efficient ventilation Flexit C2 and UNI 2, 3, 4 The handling
More informationTopvex SR 09, 11, Topvex TR Compact Air Handling Units
Topvex SR 09, 11, Topvex TR 09-15 Compact Air Handling Units Installation instructions Document in original language 125593 A003 GB Copyright Systemair AB All rights reserved E&OE Systemair AB reserves
More informationTECHNICAL SPECIFICATION
VALLOX-product code: HVAC code: 358500 L 35850 R 79076 L 79077 R SOUND ATTENUATOR (OPTIONAL) IVALLOX 252 WATER OPERATED POST- HEATING UNIT (OPTIONAL) ELECTRICAL POST-HEATING UNIT (OPTIONAL) ELECTRICAL
More informationTopMaster Air Handling unit. Technical data
Technical data Contents Page Description of the unit... 3 Design... 4 Technical data Size 030... 5 Size 0... 6 Accessories... 7 Controls... 9 Control functions... 10 Order codes... 11 Fläkt Woods 8180
More informationProfessional HEPA Air Cleaner
IB-AR20-1212-01_Layout 1 11/12/2012 17:06 Page 1 Professional HEPA Air Cleaner Instruction Manual AR-20-1 IB-AR20-1212-01_Layout 1 11/12/2012 17:06 Page 2 IB-AR20-1212-01_Layout 1 11/12/2012 17:06 Page
More informationPORTABLE AIR CONDITIONER
PORTABLE AIR CONDITIONER Model: PEL00461 1 CONTENTS Page No. Details 3 Important Safety Information 4 Introduction 4 Positioning 4 Installation 5 Control Panel 6 Remote Control 6 Operation Modes 7 Water
More informationHP727S. Single speed swimming pool heat pump controller Operation manual TABLE OF CONTENTS
HP727S Single speed swimming pool heat pump controller Operation manual TABLE OF CONTENTS 1. General Description 2. Specifications 3. Installation Instructions 4. Electrical Wiring 5. Instrument Wiring
More informationUnity CV2GIP Decentralised Mechanical Extract Ventilation (dmev) Installation Instructions
Unity CV2GIP Decentralised Mechanical Extract Ventilation (dmev) Installation Instructions Commissioning Data: To be completed by the Commissioning Engineer. Refer to User / Homeowner Guide also supplied.
More informationTopvex SF02-SF12 Air Handling Unit
Topvex SF02-SF12 Air Handling Unit Installation instructions Document in original language 130324 A004 GB Copyright Systemair AB All rights reserved E&OE Systemair AB reserves the rights to alter their
More informationEDD61 & EDD91 Extractors
EDD61 & EDD91 Extractors Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu
More informationINSTALLATION INSTRUCTIONS USER GUIDE
INSTALLATION INSTRUCTIONS USER GUIDE Tilted wall cooker hood HT90GHB2 model GB IE CONTENTS Introduction 3 Safety and warnings 4 Installation instructions 8 About your cooker hood Energy efficiency 18
More informationisense & isense-ht 230V Flush Mounted Domestic Continuous Extract Fans
isense & isense-ht 230V Flush Mounted Domestic Continuous Extract Fans Installation and Maintenance IPX4* The EMC Directive 2014/30/EU The Low Voltage Directive 2014/35/EU 1.0 SAFETY INFORMATI The installation
More informationREAD AND SAVE THESE INSTRUCTIONS
User Manual READ AND SAVE THESE INSTRUCTIONS VB0140 vänee 2000 HE 3000 HE VENMAR 1.8 HE 2.6 HE These products earned the ENERGY STAR by meeting strict energy efficiency guidelines set by Natural Resources
More informationUSER MANUAL DOWN-DRAFT HOOD. UBDDCHC60_90A, UBDDCHC60_90ABK Version 02
USER MANUAL DOWN-DRAFT HOOD UBDDCHC60_90A, UBDDCHC60_90ABK Version 02 GB IE [01] x 1 VENT PACK Ø150mm [09] x 1 [10] x 1 IE Getting started... GB Safety These instructions are for your safety. Please read
More informationUser manual AG-WT10. Indoor unit air/air heat pump UHB GB
User manual Indoor unit air/air heat pump UHB GB 1516-1 331557 Table of Contents 1 Important information Installation data Safety information Serial number an excellent choice Safety instructions Recovery
More informationTrimbox Mixed Flow Fans. Product Manual. ventilation systems TP220T TP221T TP222T TP223T
EN Trimbox Mixed Flow Fans TP220T TP221T TP222T TP223T Product Manual ventilation systems Safety Information Important Information Important: read these instructions fully before the installation of this
More informationOPERATION MANUAL. Total Heat Exchanger HRV (Heat Reclaim Ventilation) (Ceiling mounted duct type) VAM150FC VAM250FC
OPERATION MANUAL (Ceiling mounted duct type) VAM150FC VAM250FC 7 1 2 1 8 7 6 9 15 17 1 5 10 16 1 11 12 1 1 1 2 2 2 5 6 5 6 VAM150F VAM250F CONTENTS Page Safety cautions... 1 Names of parts... 2 Operation...
More informationLubrication cycle IP Enclosure Rating. 110 VAC, 220/230 VAC (50/60 Hz) Alarm Fault Relay Contacts. IP-55 (Liquid tight connector)
SMAC Controller Industrial Lubrication Systems Operation The SMAC Controller is a multi-purpose programmable controller used with industrial lubrication systems. Controller settings are saved whenever
More informationUser Manual HEAT RECOVERY VENTILATORS 1000 HE HE HE HE HE HE COMPACT 5585 COMPACT READ AND SAVE THESE INSTRUCTIONS.
User Manual HEAT RECOVERY VENTILATORS MODELS: 1000 HE HE 1.3 2000 HE HE 1.8 3000 HE HE 2.6 3055 COMPACT 5585 COMPACT VB0021 READ AND SAVE THESE INSTRUCTIONS. VVI, 550 Lemire Blvd., Drummondville, QC, Canada
More informationISCG90SS _03 ISCG90SS
ISCG90SS 60900355_03 ISCG90SS GB IE [01] x 1 [02] x 1 [03] x 1 [04] x 8 [05] x 1 [06] x 4 [07] x 1 [08] x 1 [09] x 1 [10] x 4 [11] x 4 [12] x 1 [13] x 4 (6x70mm) [14] x 8 (6.3x17x2mm) 1 : 1 [15] x 4 (3.9x18mm)
More informationluxcontrol lighting control system basicdim basicdim ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor
ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor Product description Compact dimensions for luminaire installation For up to 10 DSI or LI devices (max. 5 per output channel)
More informationTurbo. Service Instructions
Turbo Service Instructions E BAUBERG Company is happy to offer your attention a new highquality inline mixed-flow Blauberg Turbo fan. The solid team of highqualified professionals with many years of working
More informationSAVE VTC 700. Heat Recovery Ventilation Unit
Heat Recovery Ventilation Unit 207581-EN_GB 23-08-2011V.A001 Contents 1 Warnings... 1 2 Introduction... 2 3 Interface description... 3 3.1 Control panel... 3 3.2 Display symbols... 4 4 Menu settings...
More informationUSER MANUAL. ICON60H Version 00. Vertical Glass Hood
USER MANUAL ICON60H Version 00 Vertical Glass Hood [02] x 1 [01] x 1 [03] x 1 [04] x 1 [07] x 1 [05] x 1 [08] x 9 [06] x 1 [09] x 9 (4 x 30mm) [10] x 2 (3 x 10mm) Cooker hood Let's get started... These
More informationGLEB Kitchen exhaust fan
GLEB Kitchen exhaust fan Installation and Maintenance??.1.2013 Contents 1. Important information 2. Safety notes 3. Technical description 4. Transport 5. Mounting instructions 6. Commissioning 7. Maintenance
More informationB COMMISSION REGULATION (EU)
02014R0066 EN 09.01.2017 001.001 1 This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions
More informationFIL-SPL Flow-through heater for central heating USER MANUAL
FIL-SPL Flow-through heater for central heating with 0-10 V EP 15-30 control unit USER MANUAL Kaukora LTD. D106159 r3.0 Contents 1. Important information... 5 Safety information... 5 General... 5 Marking...
More informationEBC20. Instructions for fitting, installation and operation. Read and save these instructions!
EBC20 UK Instructions for fitting, installation and operation Read and save these instructions! 2 3002878 EBC20 UK 290415 1. Product information............................................... 4 1.1 Delivery.............................................................
More informationSAVE VTC 200. Installation and Service. Document in original language A002
SAVE VTC 200 Installation and Service Document in original language 211461 A002 GB Copyright Systemair UAB All rights reserved E&OE Systemair UAB reserves the rights to change their products without notice.
More informationFAITH (dmev) 230V / 24V DC SELV Flush Mounted Domestic Continuous Extract Fans
FAITH (dmev) 230V / 24V DC SELV Flush Mounted Domestic Continuous Extract Fans Installation and Maintenance IPX4* The EMC Directive 2014/30/EU The Low Voltage Directive 2014/35/EU 1.0 SAFETY INFORMATION
More informationCeiling Mount Air Purification System
Ceiling Mount Air Purification System HA-CMP-G2-R/HA-CMP-G2-OV Owner s Manual Table of Contents HealthyAir Series 1219 Filters 1 Important Safety Instructions 2 Technical Specifications 3 Packaging Reference
More informationOWNER S MANUAL. High-Wall Fan Coil Unit CONTENTS
OWNER S MANUAL High-Wall Fan Coil Unit Page GENERAL 2,3 OPERATING MODES 2 REMOTE CONTROL 2 OPERATION 3-9 REMOTE CONTROL OPERATION 3 INDOOR UNIT DISPLAY 5 EMERGENCY OPERATION 5 PRESSING THE ON/OFF BUTTON
More informationModel with intellectual humidity control and extra motion sensor control
VENTS Company, the worldwide ventilation leader, has developed the ultramodern innovative ifan based on advanced ventilation technologies. Discover absolutely new horizons for intellectual microclimate
More informationTTV 1500 / TTV 3000 OPERATING MANUAL CONVEYING FAN TRT-BA-TTV TC EN
TTV 1500 / TTV 3000 EN OPERATING MANUAL CONVEYING FAN TRT-BA-TTV1500-3000-TC2016-26-004-EN Table of contents Notes regarding the operating manual... 2 You can download the current version of the operating
More informationSwegon Home Solutions CASA. R2 Smart. Installation, commissioning and maintenance instruction. R2_a_EN-t
Swegon Home Solutions CASA R2 Smart Installation, commissioning and maintenance instruction R2_a_EN-t Contents Technical Guide for design engineers, installation engineers and service personnel The section
More informationG Installation manual Solitude - dmev unit
G G Installation manual Solitude - dmev unit Read this manual carefully before using the product and keep it in a safe place for reference. This product was constructed up to standard and in compliance
More informationHeat recovery unit RDKS. Technical instructions for installation, operation and maintenance
for installation, operation and maintenance Software version: 1.19 June 2013 Contents Maintenance (for the user) Operation and Maintenance - Functions... 3 Managing the control panel functions... 4 Control
More informationSAVE VTR 500. Installation and Service. Document in original language A001
SAVE VTR 500 Installation and Service Document in original language 211477 A001 GB Copyright Systemair UAB All rights reserved E&OE Systemair UAB reserves the rights to change their products without notice.
More informationUser manual for reversible heat pump
User manual for reversible heat pump Heat pump system integrated in Geniox, DV or TIME air handling unit Manual version 1.01.14 Part number of this manual 90925374 Contents DECLARATION OF CONFORMITY EXAMPLE...2
More informationDUCTED AIR CONDITIONER. Owner s Manual. KD Series KD24. Kaden Owner s Manual 1
DUCTED AIR CONDITIONER Owner s Manual KD Series KD24 Kaden Owner s Manual 1 Table of Contents 1. Safety Precautions 4 2. Indoor Unit Parts and Major Functions 6 3. Care and Maintenance 8 4. Troubleshooting
More informationSwedish design and manufacture since 1967
Swedish design and manufacture since 167 PVP MA20-14 rev.2 Manual User manual Copyright 2017 Pahlén AB, Box 728, SE-14 27 Upplands Väsby, Sweden Tel. +46 8 54 110 50, Fax +46 8 50 868 80, e-mail: info@pahlen.se,
More informationeco PREMIUM ENERGY RECOVERY UNIT» Technical instruction
Air Comfort Air Treatment Energy Recovery eco PREMIUM ENERGY RECOVERY UNIT» Technical instruction eco PREMIUM - Technical Instruction REDA 2 Contents Description Applications... 3 Quality & environment...
More informationSERVICE MANUAL REFRIGERATION
SERVICE MANUAL REFRIGERATION Electrolux Home Products S.p.A. Spares Operations Italy Corso lino Zanussi, 30 I - 33080 Porcia (PN) Fax +39 0434 394096 S.O.I. Edition: 10.2006 Publication no. 599 38 38-50
More informationINSTALLATION INSTRUCTIONS FOR MINI MAKE-UP AIR MODEL FER
INSTALLATION INSTRUCTIONS FOR MINI MAKE-UP AIR MODEL FER September 2017 VERSION 1.5 Please read instructions carefully before installation. This unit is a complete fresh air make-up package with an integrated
More informationHamlet 60 & 80 Wall Hood
Hamlet 60 & 80 Wall Hood Installation & User Instructions Please read these instructions carefully before installing and operating this appliance 1 Contents 1. Introduction 3 2. Health and Safety 3-4 3.
More informationInstructions for use
Instructions for use These instructions are also available on the website: www.kitchenaid.eu Important instructions for safety 4 Installation 6 Safeguarding the environment 6 Troubleshooting guide 7 After-sales
More information11,9. Ordering data. Max. cable length sensor head 1 basicdim ILD lx 150 lx m 1
Compact dimensions for luminaire installation For up to 10 DSI or DALI devices (max. 5 per output channel) DALI/DSI output channels with adjustable negative offset from channel to channel 1 Ambient light
More informationDIMENS. MIN TYPICAL MAX A 71.0 (2.795) 71.0 (2.795) 71.8 (2.826) B 29.0 (1.141) 29.0 (1.141) 29.8 (1.173)
Evco S.p.A. Code 104K204E05 page 1/5 EVK204 Digital controller for ventilated refrigerating units, with HACCP and Energy Saving functions version 1.05 GB ENGLISH 1 PREPARATIONS 1.1 Important Please read
More information26 FIREBOX EN RU UA FR
26 FIREBOX EN RU UA FR The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3. These cover the
More informationResidential Heat Recovery Ventilation. REHVA European Guidebook No 25
Residential Heat Recovery Ventilation REHVA European Guidebook No 25 REHVA European Guidebook No 25 2 Limited to mechanical supply and exhaust ventilation Targeted to engineers, HVAC consultants and contractors
More informationFlexit air handling units UNI 2, 3 og 4
Flexit handling units UNI 2, 3 og 4 energy efficient ventilation for a healthy indoor environment FOR A HEALTHY INDOOR ENVIRONMENT Energy-efficient ventilation Flexit UNI 2, 3 and 4 The handling units
More informationHEAT RECOVERY VENTILATORS MODELS HRV 90H-V ECM, 90H-V
User Guide HEAT RECOVERY VENTILATORS MODELS HRV 90H-V ECM, 90H-V AND 60H NOVO+ VB0124 VB0125 VB0127 PLEASE READ AND SAVE THESE INSTRUCTIONS. These products earned the ENERGY STAR by meeting strict energy
More informationCHILLED BEAM CASSETTE IQ STAR LYRA
CHILLED BEAM CASSETTE IQ STAR LYRA TECHNICAL CATALOGUE 2 IQ Star LYRA Chilled beam cassette - Technical catalogue IQ STAR LYRA CHILLED BEAM CASSETTE The LYRA chilled beam cassette is a compact chilled
More informationUser Manual. Vanvex Optima 180 Domestic Hot Water. Version
GB User Manual Vanvex Optima 180 Domestic Hot Water Version 3.07-0310 Table of contents Page 1. Users Guide 1.1 Use... 3 1.2 Altering of the operation data... 3 1.3 Operating menu... 4 1.4 Factory default
More informationBevent Rasch RABC-VAV. - Fire /03/2018
Bevent Rasch - Fire - RABC-VAV 26/03/2018 Fire damper and VAV-damper combined RABC-VAV Fire resistance class E60 Sizes from 100 mm to 630 mm Prefitted safety actuator 24V Installation in ducts Available
More informationElektros montavimo ir eksploatavimo instrukcija 2 Electrical installation and Operation Manual 18 Инструкция по электромонтажу и эксплуатации 34
domekt rego / recu LT RU Elektros montavimo ir eksploatavimo instrukcija 2 Electrical installation and Operation Manual 18 Инструкция по электромонтажу и эксплуатации 34 Content 1. ELECTRICAL INSTALLATION
More informationMEV SPIDER INSTALLATION GUIDE FOR ENGINEER / INSTALLER
MEV SPIDER INSTALLATION GUIDE FOR ENGINEER / INSTALLER Safety IMPORTANT Be sure to have read and understood these instructions before beginning the installation process. PRE-INSTALLATION CHECK LIST Make
More informationenergisava 200 WALL & FLOOR MOUNTED VERSION INSTALLATION GUIDE FOR ENGINEER / INSTALLER
energisava 200 WALL & FLOOR MOUNTED VERSION INSTALLATION GUIDE FOR ENGINEER / INSTALLER Safety Be sure to have read and understood these instructions before beginning the installation process. PRE-INSTALLATION
More informationOPERATION MANUAL. System Inverter Air Conditioners FXNQ20A2VEB FXNQ25A2VEB FXNQ32A2VEB FXNQ40A2VEB FXNQ50A2VEB FXNQ63A2VEB
OPERATION MANUAL System Inverter Air Conditioners FXNQ20A2VEB FXNQ25A2VEB FXNQ32A2VEB FXNQ40A2VEB FXNQ50A2VEB FXNQ63A2VEB CONTENTS Read before operation Part name and functions...2 Safety precautions...2
More informationSA-3841 User Manuel. 1U 4 Fans Unit with Thermostat Sensor. Version 1.1 Copyright All Rights Reserved
SA-3841 User Manuel 1U 4 Fans Unit with Thermostat Sensor Version 1.1 Copyright 2015 www.norcotek.com, All Rights Reserved Contents 1. Introduction 1. Overview 2. Specification 3. What's In The Box 2.
More informationVerdi 90 & 120 Ceiling Hood Re-Circulating and Ducted Installation & User Instructions
Verdi 90 & 120 Ceiling Hood Re-Circulating and Ducted Installation & User Instructions Please read these instructions carefully before installing and operating this appliance 1 Contents 1. Introduction
More informationluxcontrol lighting control system basicdim basicdim ILD Compact control module with ambient light sensor and motion sensor
ILD Compact control module with ambient light sensor and motion sensor Compact dimensions for luminaire installation For up to 10 DSI or DALI devices (max. 5 per output channel) 2 DALI/DSI output channels
More informationTIH 300 S / TIH 400 S / TIH 500 S / TIH 700 S / TIH 900 S / TIH 1100 S
TIH 300 S / TIH 400 S / TIH 500 S / TIH 700 S / TIH 900 S / TIH 1100 S EN OPERATING MANUAL INFRARED HEATING PANEL TRT-BA-TIH300S-TIH400S-TIH500S-TIH700S-TIH900S-TIH1100S-TC-002-EN Table of contents Notes
More informationRigoletto 60,90 & 120 Built-In Cupboard Hood
Rigoletto 60,90 & 120 Built-In Cupboard Hood Installation & User Instructions Please read these instructions carefully before installing and operating this appliance 1 Contents 1. Introduction 3 2. Health
More informationCAN60 / CAN60SV _01 CAN60_CAN60SV. WARNING: Read the instructions before using the appliance.
CAN60 / CAN60SV 60901870_01 CAN60_CAN60SV GB IE WARNING: Read the instructions before using the appliance. [01] x 1 [02] x 1 [03] x 2 [04] x 1 1 : 1 [05] x 4 (4x 32mm) [6] x 2 (3x 12mm) Cooker hood GB
More informationControl solutions Biofloor
TEF234 Electronic room thermostat with display 230V & 24V COMAP proposes a new control system for heating and cooling underfloor. Consisting of a 6 or 10- channels controller (MCF234), analogic (TAF234)
More informationMODBUS RS485. » Technical instructions. Air Comfort. Housing ventilation
Air Comfort Air Treatment Housing ventilation MODBUS RS485» Technical instructions 2 Modbus RS485 Technical instructions Description, Connections, Presentation, decimals Description RS485 has two connections,
More informationV-ZUG Ltd. Range hood. Mistral/Bora. Operating instructions
V-ZUG Ltd Range hood Mistral/Bora Operating instructions Thank you for choosing to buy one of our products. Your appliance is made to high standards and is easy to use. Nevertheless, please take the time
More informationBox60/ 70/ 90. Box60_70_90 v8
Box60/ 70/ 90 Box60_70_90 v8 GB IE [01] x 1 [02] x 2 [03] x 1 [04] x 2 [05] 60cm, 70cm x 2 90cm x 3 [06] x 1 [07] x 1 1 : 1 [09] x 6 (3.9 x 32mm) [08] x 6 [10] x 4 (3.4 x 10mm) Box60/ 70/ 90 GB IE Cooker
More informationCooker Hood User Manual
Cooker Hood User Manual HCB93042X EN 01M-8850803200-0116-02 Please read this manual first! Dear Customers! Thank you for preferring a Beko product. We hope that you get the best results from your product
More informationRoom thermostat with Auto Timer, Option External Input
s 1 422 Room thermostat with Auto imer, Option External Input for heating systems RDE100.. Room temperature control 2-position control with On/Off output for heating Comfort, Economy, Auto timer and Protection
More informationUSER S MANUAL HSC-14/18/24/24A
AIRREX AIR CONDITIONER USER S MANUAL HSC-14/18/24/24A Thank you for purchasing an AIRREX AIR CONDITIONER. BEFORE operation please read this user s manual carefully. Keep this manual readily available.
More informationMRXBOXAB-ECO4 100% and Opposite Handed version. Typical Installation
NUAIRE MVHR and Opposite Handed version ACHIEVES 100% DUTY IN BYPASS MODE The has been designed with automatic 100% bypass as listed on the SAP Product Characteristics Database (PCDB). Due to its intelligent
More informationSERVICE MANUAL New Electronic Cold Platform 2005.
SERVICE MANUAL New Electronic Cold Platform 2005. All the parts included in this document are the property of Indesit Company S.p.A. All rights reserved. This document and the information it contains are
More informationLA-Turbo Downdraft INSTALLATION INSTRUCTIONS
LA-Turbo Downdraft INSTALLATION INSTRUCTIONS A B C D E F G H I BUILT TO TOP 108 880 A 108 880 E D INSTALLATION OPTIONS: INSTALLATION OF MOTOR Front Front G G INSTALLATION WITH REMOTE MOTOR 1 2 3 F INSTALLATION
More informationOPERATION MANUAL RK-2006LPP AUGER FITTED SOLID FUEL BOILER TEMPERATURE CONTROLLER. Version DC19
OPERATION MANUAL RK-2006LPP AUGER FITTED SOLID FUEL BOILER TEMPERATURE CONTROLLER Version DC19 1. Application. Controller RK-2006LPP is designed for temperature control of solid fuel fired water boilers
More informationIMPORTANT SAFETY INSTRUCTIONS
User Manual INDEX IMPORTANT SAFETY INSTRUCTIONS... 1 FEATURES... 2 SPECIFICATIONS...2 PRODUCT DESCRIPTION... 3 THE CONTROL PANEL... 4 UNIT SETUP... 5 TO OPERATE SAFELY... 5 OPERATING INSTRUCTIONS... 6-10
More informationPLEASEREADANDSAVETHESEINSTRUCTIONS. NewAir AC-14000E, AC-14000H Portable Air Conditioner Owner's Manual
PLEASEREADANDSAVETHESEINSTRUCTIONS NewAir AC-14000E, AC-14000H Portable Air Conditioner Owner's Manual GENERAL SAFETY INSTRUCTIONS: ALWAYS OPERATE THE UNIT IN AN UPRIGHT POSITION AND PLACE IT ON A FLAT,
More informationProCon 16, 31, 47 & 75. RVA 63 Boiler and Circuit Controller Commissioning Data.
ProCon 16, 31, 47 & 75. RVA 63 Boiler and Circuit Controller Commissioning Data. The RVA63 controller can be utilized to control the following system configurations via LPB communication. Equipment Required
More informationMAXI CENTRALIZED VENTILATION WITH HEAT RECOVERY
MAXI CENTRALIZED VENTILATION WITH HEAT RECOVERY Product Overview www.orcaenergy.eu MAXI Device for heat recovery MAXI is designed to provide permanent controlled air exchange by means of mechanical ventilation
More informationLeonardo 90 Wall Hood
Leonardo 90 Wall Hood Installation & User Instructions Please read these instructions carefully before installing and operating this appliance 1 Contents 1. Introduction 3 2. Health and Safety 3-4 3. Installation
More informationElectronically controlled instantaneous water heater. DEX: C models. Instructions for the user
Electronically controlled instantaneous water heater DEX: 27930-50 C models Instructions for the user For 50 ºC models, the appliance delivers water not exceeding 50 ºC in accordance with AS3498. MADE
More informationELECTRIC CONVECTOR HEATER. This product is only suitable for well insulated spaces or occasional use.
EN ELECTRIC CONVECTOR HEATER IP24 This product is only suitable for well insulated spaces or occasional use. OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance
More information