Quality Built, American Made. Medical Equipment. Full Product Line Catalog.

Transcription

1 Quality Built, American Made Medical Equipment Full Product Line Catalog

2 Table of Contents Blanket & Fluid Warming Cabinets 2 (Data Logging) Overview 4 Stainless Steel Carts 40 Closed Case Carts 41 TS-Series (Touch Screen) Overview 5 Open Case Carts 42 About Our Company Chamber Units 6 Chamber Units 9 Vertical Handle Case Carts 43 Utility Carts 43 MAC Medical, Inc. concentrates in manufacturing top quality medical equipment including Warming Cabinets, Stretchers, Sinks, Tables, Cabinetry, Case Carts, IV Stands, Mayo Stands, and many other stainless steel products. Founded in 1998 by Dennis and Stacey Cooper, the company has grown to more than 120 full-time employees operating in a 100,000 square foot manufacturing facility and 8,200 square foot corporate office. Both facilities are located in Southern Illinois making this an ideal place for centralized distribution to the entire United States. Not limited to the United States, MAC Medical has product in over 20 countries worldwide. Dennis Cooper President Stacey Cooper Vice President Corporate Office 325 West Main Street Belleville, IL Manufacturing Plant 820 South Mulberry Street Millstadt, IL Triple Chamber Units 12 Mobile Stands, s, & Baskets 12 vs. TS-Series Comparison 13 Options & How to Order 14 TS-Series Options & How to Order 15 Transport Stretchers 16 General Transport Stretcher 17 5th Wheel Transport Stretcher 18 Stretcher Comparison 19 Stainless Steel Stands 44 Solution Stands 45 IV Stands 46 Mayo Stands 47 Other Stainless Steel Products 48 Linen Hampers 49 Kick Buckets 50 Step Stools 50 Wall Shelves 51 Founded as a solutions-based company, MAC Medical still maintains that as its core competency. With no project too large or too small, MAC Medical is committed to providing solutions for customer needs with its service and American-made products. Customer needs are our first priority. For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. Corporate Office 2015 Phone: Toll Free: Fax: sales@macmedical.com Stainless Steel Sinks 20 Surgical Scrub Sinks (SS-Series) 21 Surgical Scrub Sinks (ES-Series) 23 Processing Sinks (Pipe Base Units) 24 Processing Sinks (Cabinet Base Units) 25 Stainless Steel Cabinets 26 Wall Cabinets 27 Base Cabinets 28 Desk Cabinets 29 Supply Cabinets 30 Scope Cabinets 31 Nurses Documentation Stations 32 Configured Cabinets 33 Pass Through Windows 52 Peg Boards 53 MR Conditional Products 54 MR Mayo Stands 55 MR Solution Stands 55 MR Linen Hampers 56 MR Kick Buckets 57 MR IV Stands 57 MR Step Stools 57 MR Instrument Tables 58 Contact Us 59 Warranty Information 60 Stainless Steel Tables 34 Instrument Tables 35 Look for this logo! Manufacturing Plant 2002 Utility Tables 36 Nested Tables 36 Work Tables 37 Space Saver Tables 37 Adjustable Over Operating Tables 38 Ergonomically Friendly Central Supply Tables 38 Prep & Pack Workstations 39 Call Toll Free: Table of Contents

3 Blanket & Fluid Warming Cabinets We offer a variety of Blanket & Fluid Warming Cabinets to help compliment and enhance your facility. As with all of our products, warming cabinets undergo stringent testing procedures during the manufacturing process to assure a long life, the highest quality, and accurate temperature settings. We offer standard sizes along with custom sizes to meet specific requirements. Data Logging Warming Cabinets TS-Series Touch Screen Warming Cabinets MAC Medical, Inc. is proud to offer both our (Data Logging) and TS-Series (Touch Screen) Blanket & Fluid Warming Cabinets. Both series provide the perfect blend of technology, value, and customer support in the industry. The Warming Cabinets are the most user-friendly temperature recording devices on the market today. These warmers are equipped with independent, digitally controlled heating chambers that offer actual temperature and set point displays. The Ethernet/Wi-Fi capable TS-Series Warming Cabinets offer unparalleled technology by allowing remote connectivity to your warmer (via smart phone app) and giving you control of your warmer wherever you are. The is available in single, dual, and triple chamber units, while the TS-Series is available in single and dual chamber units. Both series require no additional software and have many optional features to choose from. 2 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

4 Warming Cabinets NEXT the generation of warming cabinets Premium Upgrade TS-Series Warming Cabinets SMART technology The (Data Logging) Warming Cabinets provide independent, digitally controlled heating chambers that offer actual temperature and set point displays. Data is recorded every 30 minutes and stored for up to two years. Choose from single, dual, or triple chamber units. DWC243074E (shown with standard 4" base and optional glass door) The Ethernet/Wi-Fi capable TS-Series Warming Cabinets offer unparalleled technology by allowing remote connectivity to your warmer (via smart phone app) and giving you control of your warmer wherever you are. Choose from single or dual chamber units. DWC243074T-TS (shown with standard 4" base, optional glass door and roll out baskets) OFF OFF ON ON Chamber Header Control "Easy Log" integrated data logger with removable USB now standard! Keyed door lock for single & upper chamber units now standard! Adjustable feet now standard! Automatically records data every 30 minutes Internal storage up to 2 years Displays actual temperature and set points at all times Independent digitally controlled heating chambers Rapid warm time (2-6 hours depending on load) Keyed temperature lock out Push button digital operation Large digital display(s) Fully insulated to provide uniform heating Audible & visual over-temp alarm Remote alarm output Full view glass door Left hand door hinge Mobile base or stand 220/240V power supply Celsius Two (2) recessed unit options Seismic braces Roll out basket(s) with cool touch handles Pass through chamber Sloped top Keyed door lock for intermediate & lower chamber units Electronic keypad lock Custom sizes available To Download Data 1. Insert supplied USB flash drive into USB slot. 2. Data download will automatically begin. 3. During download display will read: 4. Once the display shows the temperature again, it is safe to remove the flash drive. 5. Data is saved on the flash drive as a.csv file for easy import into most spreadsheet programs (e.g. Microsoft Excel). 6. Data is secure (no reporting or connection to any network). Sample Report SWC243074, S/N: D01, DATE/TIME 10/10/ :12 10/10/ :43 10/11/2016 0:12 10/11/2016 0:43 10/11/2016 1:12 R FDA Listed TEMPERATURE OSHPD Pre-Approved C/ F F F F F F Header Control For TS-Series Units Intuitive touch screen control Intuitive software (supports multiple languages) FDA compliant data logging with digital signatures View live trends Alarm logging Multi-level user security Operator audit trail Built in Ethernet Wi-Fi capable (router to be supplied by end user) Remote monitoring & control (VNC) Remote tech support & diagnostics Text and alarm notifications File transfer via USB or FTP web page Smart phone/device access Top chamber integrated door lock Check on the status of your warmer(s) with your smart phone device R FDA Listed OSHPD Pre-Approved Manage multiple warmers remotely or locally, via Ethernet or Wi-Fi (router for Wi-Fi to be supplied by end user) Full view glass door Left hand door hinge Mobile base or stand 220/240V power supply Celsius Two (2) recessed unit options Seismic braces Roll out basket(s) with cool touch handles Pass through chamber Sloped top Keyed door lock for lower chamber units Electronic keypad lock Custom sizes available Optional roll out basket makes organization and item selection easy. Cool touch handles keep your hands from getting burned. 4 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

5 Blanket & Fluid Warming Cabinets Chamber Units Blanket & Fluid Warming Cabinets Chamber Units SWC ( only) 15.5"D x 18"W x 22"H (393.7mm x 457.2mm x 558.8mm) Optional Adjustable Shelf Chamber I.D. 13"D x 14"W x 13"H (330.2mm x 355.6mm x 330.2mm) 1.37 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 120V, 2.9 Amp, 50/60 Hz,.23 kwh (Avg.), 785 BTU/hr (Avg.) 3 Blankets & 8 Solution Bottles (1 Liter Each) MS1518 Mobile Stand WB1518 No base (NB) standard for this model SWC () SWC TS (TS-Series) 20.5"D x 24"W x 24.5"H (520.7mm x 609.6mm x 622.3mm) Optional Adjustable Shelf Chamber I.D. 17"D x 20"W x 15.25"H (431.8mm x 508mm x 387.3mm) 3.0 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 120V, 2.9 Amp, 50/60 Hz,.23 kwh (Avg.), 785 BTU/hr (Avg.) 9 Blankets & 8 Solution Bottles (1 Liter Each) MS1824 Mobile Stand WB1824 No base (NB) standard for this model SWC () SWC TS (TS-Series) 26.5"D x 30"W x 36"H (673.1mm x 762mm x 914.4mm) 2 Adjustable Shelves Chamber I.D. 23"D x 26"W x 25"H (584.2mm x 660.4mm x 635mm) 8.65 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 6.3 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 32 Blankets & 40 Solution Bottles (1 Liter Each) MS2430 Mobile Stand WB2430 2" base (2B) standard for this model SWC () SWC TS (TS-Series) 20.5"D x 24"W x 64.75"H (520.7mm x 609.6mm x 1645mm) 3 Adjustable Shelves Chamber I.D. 17"D x 20"W x 49.5"H (431.8mm x 508mm x 1257mm) 9.74 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 120V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) 32 Blankets & 48 Solution Bottles (1 Liter Each) MB1824 WB1824 SWC () SWC TS (TS-Series) 26.5"D x 24"W x 24.5"H (673.1mm x 609.6mm x 622.3mm) 1 Adjustable Shelf Chamber I.D. 23"D x 20"W x 15.25"H (584.2mm x 508mm x 387.3mm) 4.06 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) MS2424 Mobile Stand SWC () SWC TS (TS-Series) 20.5"D x 30"W x 24.5"H (520.7mm x 762mm x 622.3mm) 1 Adjustable Shelf Chamber I.D. 17"D x 26"W x 15.25"H (431.8mm x 660.4mm x 387.3mm) 3.9 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) MS1830 Mobile Stand SWC () SWC TS (TS-Series) 26.5"D x 24"W x 64.75"H (673.1mm x 609.6mm x 1645mm) 3 Adjustable Shelves Chamber I.D. 23"D x 20"W x 51"H (584.2mm x 508mm x 1295mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) SWC () SWC TS (TS-Series) 20.5"D x 30"W x 64.75"H (520.7mm x 762mm x 1645mm) 3 Adjustable Shelves Chamber I.D. 17"D x 26"W x 51"H (431.8mm x 660.4mm x 1295mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 6.3 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 9 Blankets & 12 Solution Bottles (1 Liter Each) WB2424 No base (NB) standard for this model 120V, 5.7 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 18 Blankets & 8 Solution Bottles (1 Liter Each) WB1830 No base (NB) standard for this model 120V, 6.5 Amp, 50/60 Hz,.41 kwh (Avg.), 1604 BTU/hr (Avg.) 80 Blankets & 120 Solution Bottles (1 Liter Each) MB2424 WB V, 6.3 Amp, 50/60 Hz,.41 kwh (Avg.), 1400 BTU/hr (Avg.) 66 Blankets & 72 Solution Bottles (1 Liter Each) MB1830 WB1830 SWC () SWC TS (TS-Series) 26.5"D x 30"W x 24.5"H (673.1mm x 762mm x 622.3mm) 1 Adjustable Shelf Chamber I.D. 23"D x 26"W x 15.25"H (584.2mm x 660.4mm x 387.3mm) 5.27 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 120V, 6.3 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 18 Blankets & 20 Solution Bottles (1 Liter Each) MS2430 Mobile Stand WB2430 No base (NB) standard for this model SWC () SWC TS (TS-Series) 20.5"D x 30"W x 36"H (520.7mm x 762mm x 914.4mm) 2 Adjustable Shelves Chamber I.D. 17"D x 26"W x 25"H (431.8mm x 660.4mm x 635mm) 6.39 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 5.7 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 32 Blankets & 36 Solution Bottles (1 Liter Each) MS1830 Mobile Stand WB1830 2" base (2B) standard for this model SWC () SWC TS (TS-Series) 26.5"D x 30"W x 64.75"H (673.1mm x 762mm x 1645mm) 3 Adjustable Shelves Chamber I.D. 23"D x 26"W x 51"H (584.2mm x 660.4mm x 1295mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 6.5 Amp, 50/60 Hz,.41 kwh (Avg.), 1604 BTU/hr (Avg.) 80 Blankets & 120 Solution Bottles (1 Liter Each) MB2430 WB Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

6 Blanket & Fluid Warming Cabinets Chamber Units Blanket & Fluid Warming Cabinets Chamber Units SWC () SWC TS (TS-Series) 20.5"D x 24"W x 74.5"H (520.7mm x 609.6mm x 1892mm) 2 Adjustable Shelves, 1 Fixed Shelf Chamber I.D. 17"D x 20"W x 61"H (431.8mm x 508mm x 1549mm) 12 Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) 32 Blankets & 60 Solution Bottles (1 Liter Each) MB1824 WB1824 SWC () SWC TS (TS-Series) 20.5"D x 30"W x 74.5"H (520.7mm x 762mm x 1892mm) 2 Adjustable Shelves, 1 Fixed Shelf Chamber I.D. 17"D x 26"W x 61"H (431.8mm x 660.4mm x 1549mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) 80 Blankets & 72 Solution Bottles (1 Liter Each) MB1830 WB1830 DWC182464T () DWC182464T-TS (TS-Series) (T = Chambers in Thirds) 20.5"D x 24"W x 64.75"H (520.7mm x 609.6mm x 1645mm) 7.47 Cubic Feet Storage, 3 Adjustable Shelves Upper Chamber I.D. 17"D x 20"W x 13.5"H (431.8mm x 508mm x 342.9mm) 2.65 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 17"D x 20"W x 24.5"H (431.8mm x 508mm x 622.3mm) 4.82 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 2218 BTU/hr (Avg.) 26 Blankets & 36 Solution Bottles (1 Liter Each) MB1824 WB1824 DWC242464T () DWC242464T-TS (TS-Series) (T = Chambers in Thirds) 26.5"D x 24"W x 64.75"H (673.1mm x 609.6mm x 1645mm) Cubic Feet Storage, 3 Adjustable Shelves Upper Chamber I.D. 23"D x 20"W x 13.5"H (584.2mm x 508mm x 342.9mm) 3.59 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) Lower Chamber I.D. 23"D x 20"W x 24.5"H (584.2mm x 508mm x 622.3mm) 6.52 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 8.3 Amp, 50/60 Hz,.60 kwh (Avg.), 2047 BTU/hr (Avg.) 52 Blankets & 80 Solution Bottles (1 Liter Each) MB2424 WB2424 SWC () SWC TS (TS-Series) 26.5"D x 24"W x 74.5"H (673.1mm x 609.6mm x 1892mm) 2 Adjustable Shelves, 1 Fixed Shelf Chamber I.D. 23"D x 20"W x 61"H (584.2mm x 508mm x 1549mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) 80 Blankets & 120 Solution Bottles (1 Liter Each) MB2424 WB2424 SWC () SWC TS (TS-Series) 26.5"D x 30"W x 74.5"H (673.1mm x 762mm x 1892mm) 2 Adjustable Shelves, 1 Fixed Shelf Chamber I.D. 23"D x 26"W x 61"H (584.2mm x 660.4mm x 1549mm) 21.1 Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) 80 Blankets & 120 Solution Bottles (1 Liter Each) MB2430 WB2430 DWC183064T () DWC183064T-TS (TS-Series) (T = Chambers in Thirds) 20.5"D x 30"W x 64.75"H (520.7mm x 762mm x 1645mm) 9.72 Cubic Feet Storage, 3 Adjustable Shelves Upper Chamber I.D. 17"D x 26"W x 13.5"H (431.8mm x 660.4mm x 342.9mm) 3.45 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 17"D x 26"W x 24.5"H (431.8mm x 660.4mm x 622.3mm) 6.27 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 8.3 Amp, 50/60 Hz,.60 kwh (Avg.), 2047 BTU/hr (Avg.) MB1830 WB Blankets & 54 Solution Bottles (1 Liter Each) 8 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

7 Blanket & Fluid Warming Cabinets Chamber Units Blanket & Fluid Warming Cabinets Chamber Units DWC243064T () DWC243064T-TS (TS-Series) (T = Chambers in Thirds) 26.5"D x 30"W x 64.75"H (673.1mm x 762mm x 1645mm) Cubic Feet Storage, 3 Adjustable Shelves DWC182474T () DWC182474T-TS (TS-Series) (T = Chambers in Thirds) 20.5"D x 24"W x 74.5"H (520.7mm x 609.6mm x 1892mm) 9.44 Cubic Feet Storage, 3 Adjustable Shelves DWC243074T () DWC243074T-TS (TS-Series) (T = Chambers in Thirds) 26.5"D x 30"W x 74.5"H (673.1mm x 762mm x 1892mm) Cubic Feet Storage, 3 Adjustable Shelves DWC183074E () DWC183074E-TS (TS-Series) (E = Equal Chambers) 20.5"D x 30"W x 74.5"H (520.7mm x 762mm x 1892mm) Cubic Feet Storage, 4 Adjustable Shelves Upper Chamber I.D. 23"D x 26"W x 13.5"H (584.2mm x 660.4mm x 342.9mm) 4.67 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) Upper Chamber I.D. 17"D x 20"W x 15.25"H (431.8mm x 508mm x 387.3mm) 2.65 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 23"D x 26"W x 15.25"H (584.2mm x 660.4mm x 387.3mm) 5.28 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 17"D x 26"W x 25"H (431.8mm x 660.4mm x 635mm) 6.39 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) Lower Chamber I.D. 23"D x 26"W x 24.5"H (584.2mm x 660.4mm x 622.3mm) 8.48 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 2218 BTU/hr (Avg.) 52 Blankets & 96 Solution Bottles (1 Liter Each) MB2430 WB2430 Lower Chamber I.D. 17"D x 20"W x 34.5"H (431.8mm x 508mm x 876.3mm) 6.79 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 2218 BTU/hr (Avg.) 32 Blankets & 48 Solution Bottles (1 Liter Each) MB1824 WB1824 Lower Chamber I.D. 23"D x 26"W x 34.5"H (584.2mm x 660.4mm x 876.3mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 12.5 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) 52 Blankets & 120 Solution Bottles (1 Liter Each) MB2430 WB2430 Lower Chamber I.D. 17"D x 26"W x 26"H (431.8mm x 660.4mm x 660.4mm) 6.65 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 11.4 Amp, 50/60 Hz,.82 kwh (Avg.), 2798 BTU/hr (Avg.) 64 Blankets & 72 Solution Bottles (1 Liter Each) MB1830 WB1830 DWC242474T () DWC242474T-TS (TS-Series) (T = Chambers in Thirds) DWC183074T () DWC183074T-TS (TS-Series) (T = Chambers in Thirds) 20.5"D x 30"W x 74.5"H (520.7mm x 762mm x 1892mm) Cubic Feet Storage, 3 Adjustable Shelves DWC243074E () DWC243074E-TS (TS-Series) (E = Equal Chambers) 26.5"D x 30"W x 74.5"H (673.1mm x 762mm x 1892mm) Cubic Feet Storage, 4 Adjustable Shelves 26.5"D x 24"W x 74.5"H (673.1mm x 609.6mm x 1892mm) Cubic Feet Storage, 3 Adjustable Shelves Upper Chamber I.D. 23"D x 20"W x 15.25"H (584.2mm x 508mm x 387.3mm) 4.06 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 17"D x 26"W x 15.25"H (431.8mm x 660.4mm x 387.3mm) 3.45 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 23"D x 26"W x 25"H (584.2mm x 660.4mm x 635mm) 8.65 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) Lower Chamber I.D. 23"D x 20"W x 34.5"H (584.2mm x 508mm x 876.3mm) 9.18 Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 120V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 2218 BTU/hr (Avg.) 52 Blankets & 80 Solution Bottles (1 Liter Each) MB2424 WB2424 Lower Chamber I.D. 17"D x 26"W x 34.5"H (431.8mm x 660.4mm x 876.3mm) 8.82 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 8.3 Amp, 50/60 Hz,.82 kwh (Avg.), 2047 BTU/hr (Avg.) 52 Blankets & 72 Solution Bottles (1 Liter Each) MB1830 WB1830 Lower Chamber I.D. 23"D x 26"W x 26"H (584.2mm x 660.4mm x 660.4mm) 8.99 Cubic Feet Storage Temperature Range F (Tolerance +/- 2 F) 120V, 12.5 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) 64 Blankets & 120 Solution Bottles (1 Liter Each) MB2430 WB Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

8 Blanket & Fluid Warming Cabinets Which Warming Cabinet is right for your facility? Triple Chamber Units vs. TS-Series Comparison Chart Standard Features (Data Logging) TS-Series (Touch Screen) "Easy Log" integrated data logger with removable USB TWC ( only) 20.5"D x 30"W x 78.75"H (520.7mm x 762mm x 2000mm) Cubic Feet Storage, 1 Adjustable Shelf Upper Chamber I.D. 17"D x 26"W x 11.25"H (431.8mm x 660.4mm x 285.7mm) 2.88 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Intermediate Chamber I.D. 17"D x 26"W x 10.75"H (431.8mm x 660.4mm x 273mm) 2.75 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 17"D x 26"W x 18.5"H (431.8mm x 660.4mm x 469.9mm) 4.73 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 120V, 12.9 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) 62 Blankets & 54 Solution Bottles (1 Liter Each) MB1830 WB1830 TWC ( only) 26.5"D x 30"W x 78.75"H (673.1mm x 762mm x 2000mm) Cubic Feet Storage, 1 Adjustable Shelf Upper Chamber I.D. 23"D x 26"W x 11.25"H (584.2mm x 660.4mm x 285.7mm) 3.89 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Intermediate Chamber I.D. 23"D x 26"W x 10.75"H (584.2mm x 660.4mm x 273mm) 3.72 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 23"D x 26"W x 18.5"H (584.2mm x 660.4mm x 469.9mm) 6.4 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 120V, 12.9 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) 62 Blankets & 90 Solution Bottles (1 Liter Each) MB2430 WB2430 Internal storage up to 2 years Keyed temperature lock out Push button digital operation Large digital display(s) Automatically records data every 30 minutes Displays actual temperature and set points at all times Independent digitally controlled heating chambers Rapid warm time (2-6 hours depending on load) Keyed door lock for single & upper chamber units Adjustable feet Fully insulated to provide uniform heating Audible & visual over-temp alarm Electronic temperature lock out Remote alarm output Intuitive touch screen control Intuitive software (supports multiple languages) FDA compliant data logging with digital signatures View live trends Alarm logging Multi-level user security Operator audit trail Built in Ethernet & Wi-Fi capable Remote monitoring & control (VNC) via smart phone Remote tech support & diagnostics Text & alarm notifications File transfer via USB or FTP web page Mobile Stands, s, and Baskets Mobile Stands s Model # Model # MS1518 MS1824 MS1830 MS2424 MS "W x 18"D x 34"H 28"W x 20"D x 34"H 34"W x 20"D x 34"H 26"W x 26"D x 34"H 34"W x 26"D x 34"H MB1824 MB1830 MB2424 MB "W x 22"D x 6.75"H 33"W x 22"D x 6.75"H 27"W x 28"D x 6.75"H 33"W x 28"D x 6.75"H s Model # WB "W x 11.8"D x 4.875"H WB "W x 15.8"D x 4.875"H WB "W x 15.8"D x 4.875"H WB "W x 21.8"D x 4.875"H WB "W x 21.8"D x 4.875"H Optional Features Full view glass door Left hand door hinge Mobile base or stand 220/240V power supply Celsius Two (2) recessed unit options Seismic braces Roll out basket(s) with cool touch handles Pass through chamber Sloped top Electronic keypad lock* Keyed door lock for lower chambers** Keyed door lock for intermediate chambers*** Custom sizes available * Only available for Chamber Units ** Only available for and Triple Chamber Units *** Only available for Triple Chamber Units (Data Logging) TS-Series (Touch Screen) Note: All warming cabinet mobile stands, mobile bases, and baskets are sold separately. For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. 12 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

9 OFF ON OFF ON Options TS-Series Options Sloped Top (ST) Stainless Steel Door (Standard) Right Hinge (Standard) Left Hinge (LH) Glass Door (GD) No Base (NB) How to Order (WB) Door Types Stainless Steel (Standard) Glass Door Hinges Right (Standard) Left Base Styles 2" (not available for SWC151822) 4" (not available for SWC151822) 6" (not available for SWC151822) No Base Note: Additional shelving available for purchase Other Options 220/240V Power Supply Celsius Two (2) Recessed Unit Options: R1 = Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R2 = Top Panel, Side Panels, and Trim Kit Seismic Braces (s) Pass Through Chamber Sloped Top (not available for SWC151822) Intermediate Chamber Door Lock (only available for Triple Chamber Units) Lower Chamber Door Lock (only available for and Triple Chamber Units) Electronic Keypad Lock (only available for Chamber Units) Sloped Top (ST) Stainless Steel Door (Standard) Right Hinge (Standard) Left Hinge (LH) Glass Door (GD) No Base (NB) (WB) How to Order TS-Series Door Types Stainless Steel (Standard) Glass Door Hinges Right (Standard) Left Base Styles 2" (not available for SWC151822) 4" (not available for SWC151822) 6" (not available for SWC151822) No Base Note: Additional shelving available for purchase Other Options 220/240V Power Supply Celsius Two (2) Recessed Unit Options: R1 = Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R2 = Top Panel, Side Panels, and Trim Kit Seismic Braces (s) Pass Through Chamber Sloped Top Lower Chamber Door Lock Electronic Keypad Lock (only available for Chamber Units) Model # Overall Size Chambers Door Type Door Hinge Base Style Other Options Model # Overall Size Chambers Door Type Door Hinge Base Style Other Options SWC SWC SWC SWC SWC SWC SWC SWC SWC SWC "D x 18"W x 22"H 20.5"D x 24"W x 24.5"H 26.5"D x 24"W x 24.5"H 20.5"D x 30"W x 24.5"H 26.5"D x 30"W x 24.5"H 20.5"D x 30"W x 36"H 26.5"D x 30"W x 36"H 20.5"D x 24"W x 64.75"H 26.5"D x 24"W x 64.75"H 20.5"D x 30"W x 64.75"H G = Glass Door Blank = Stainless Steel Door (Standard) LH = Left Hinge Blank = Right Hinge (Standard) 2B = 2" Base 4B = 4" Base 6B = 6" Base NB = No Base MB = Mobile Base 220 = 220/240V Power Supply C = Celsius R1 = Recessed Unit with Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R2 = Recessed Unit with Top Panel, Side Panels, and Trim Kit SWC TS SWC TS SWC TS SWC TS SWC TS SWC TS SWC TS SWC TS SWC TS SWC TS 20.5"D x 24"W x 24.5"H 26.5"D x 24"W x 24.5"H 20.5"D x 30"W x 24.5"H 26.5"D x 30"W x 24.5"H 20.5"D x 30"W x 36"H 26.5"D x 30"W x 36"H 20.5"D x 24"W x 64.75"H 26.5"D x 24"W x 64.75"H 20.5"D x 30"W x 64.75"H 26.5"D x 30"W x 64.75"H G = Glass Door Blank = Stainless Steel Door (Standard) LH = Left Hinge Blank = Right Hinge (Standard) 2B = 2" Base 4B = 4" Base 6B = 6" Base NB = No Base MB = Mobile Base 220 = 220/240V Power Supply C = Celsius R1 = Recessed Unit with Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R2 = Recessed Unit with Top Panel, Side Panels, and Trim Kit SWC "D x 30"W x 64.75"H SWC "D x 24"W x 74.5"H SWC "D x 30"W x 74.5"H SWC "D x 24"W x 74.5"H SWC "D x 30"W x 74.5"H DWC182464T* 20.5"D x 24"W x 64.75"H DWC242464T* 26.5"D x 24"W x 64.75"H DWC183064T* 20.5"D x 30"W x 64.75"H DWC243064T* 26.5"D x 30"W x 64.75"H DWC182474T* 20.5"D x 24"W x 74.5"H DWC242474T* 26.5"D x 24"W x 74.5"H DWC183074T* 20.5"D x 30"W x 74.5"H DWC243074T* 26.5"D x 30"W x 74.5"H DWC183074E** 20.5"D x 30"W x 74.5"H DWC243074E** 26.5"D x 30"W x 74.5"H TWC "D x 30"W x 78.75"H TWC "D x 30"W x 78.75"H * T = Chambers in Thirds ** E = Equal Chambers Triple Triple NEXT the generation of warming cabinets Not available for SWC Only available for Triple Chamber Units Only available for and Triple Chamber Units Only available for Chamber Units Example 1: Model # SWC182464, Glass Door, Left Hinge,, Sloped Top = Order Model # SWC G-LH-MB-ST SB = Seismic Braces WB = P = Pass Through Chamber ST = Sloped Top IDL = Intermediate Chamber Door Lock LDL = Lower Chamber Door Lock EL = Electronic Keypad Lock SWC TS 20.5"D x 24"W x 74.5"H SWC TS 20.5"D x 30"W x 74.5"H SWC TS 26.5"D x 24"W x 74.5"H SWC TS 26.5"D x 30"W x 74.5"H DWC182464T*-TS 20.5"D x 24"W x 64.75"H DWC242464T*-TS 26.5"D x 24"W x 64.75"H DWC183064T*-TS 20.5"D x 30"W x 64.75"H DWC243064T*-TS 26.5"D x 30"W x 64.75"H DWC182474T*-TS 20.5"D x 24"W x 74.5"H DWC242474T*-TS 26.5"D x 24"W x 74.5"H DWC183074T*-TS 20.5"D x 30"W x 74.5"H DWC243074T*-TS 26.5"D x 30"W x 74.5"H DWC183074E**-TS 20.5"D x 30"W x 74.5"H DWC243074E**-TS 26.5"D x 30"W x 74.5"H * T = Chambers in Thirds ** E = Equal Chambers 1/3 1/2 SMART technology Only available for Chamber Units Only available for Chamber Units Example 1: Model # SWC TS, Glass Door, Left Hinge,, Sloped Top = Order Model # SWC TS-G-LH-MB-ST SB = Seismic Braces WB = P = Pass Through Chamber ST = Sloped Top LDL = Lower Chamber Door Lock EL = Electronic Keypad Lock Example 2: Model # DWC243074E-TS, Stainless Steel Door, Right Hinge, 4" Base, Celsius, Lower Chamber Door Lock = Order Model # DWC243074E-TS-4B-C-LDL 1/3 1/2 Example 2: Model # DWC243074E, Stainless Steel Door, Right Hinge, 4" Base, Celsius, Lower Chamber Door Lock = Order Model # DWC243074E-4B-C-LDL 2/3 1/2 R FDA Listed OSHPD Pre-Approved 2/3 1/2 R FDA Listed OSHPD Pre-Approved 14 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

10 PT1001 General Transport Stretcher The new redesigned PT1001 allows for easy and comfortable patient transfer with an increased weight capacity of up to 750 lbs. Economical and versatile, the PT1001 is an ideal solution for any department where cost efficient quality is required. 750 PT1001 POUND Weight Capacity Transport Stretchers Our Transport Stretchers are designed to ensure safety and efficiency while offering the best blend of features, value, ergonomics, and customer support in the industry. A variety of standard and optional features provide optimal patient comfort & transport. 750 lb. weight capacity Height adjustment range: 22" 35" (bottom of mattress) Ergonomically located oxygen tank holder Effortless steering, pivoting, and cornering with 8" Tente casters (1 directional & 3 swiveling) 6 brake/steer pedals pedestal lift mechanism Lift/Trendelenburg pedals on both sides Trendelenburg & reverse Trendelenburg +/- 18 Fowler assisted lift back rest with 90 adjustability Fold forward side rails with built in push handles 29" or 31" bed width 4" comfort mattress 2 hook removable telescopic IV pole 6 IV pole sockets available Large storage area underneath for patient belongings Full perimeter bumper to protect your walls and fixtures 4 restraint belt locations 5th wheel add-on kit Fold down push handles Knee gatch Paper roll dispenser kit * Detachable foot board * Envelope style rail bumper pads * * Additional lead time required (7-10 business days) Overall Outside Width 33 9/16" (852.49mm) Overall Outside Width 35 9/16" (903.29mm) Fully Extended Height 35" (889mm) Lowest Height Position 22" (558.8mm) PT1001 Overall Outside Length 83 5/16" ( mm) 29" Bed Width Patient Surface Outside Length 75 7/16" ( mm) PT Overall Outside Length 83 5/16" ( mm) 31" Bed Width Patient Surface Outside Length 75 7/16" ( mm) Height Adjustment Ranges (PT1001 & PT ) Patient Surface Outside Width 29 1/8" (739.77mm) Patient Surface Outside Width 31 1/8" (790.57mm) Fully Extended Height 51" ( mm) Lowest Height Position 38" (965.19mm) 16 Transport Stretchers Call Toll Free: Transport Stretchers

11 PTF1000 5th Wheel Transport Stretcher MAC Medical, Inc. is pleased to announce the arrival of the new PTF1000 5th Wheel Transport Stretcher. The retractable center fifth wheel combines effortless directional movement and cornering with 4 swiveling wheels for ease of use, control, and safety. Retractable center fifth wheel provides effortless directional movement and cornering 750 lb. weight capacity Height adjustment range: 22"-35" (bottom of mattress) Ergonomically located oxygen tank holder Effortless steering, pivoting, and cornering with 8" Tente casters (4 swiveling) 6 brake/steer pedals pedestal lift mechanism Lift/Trendelenburg pedals on both sides Trendelenburg & reverse Trendelenburg +/- 18 Fowler assisted lift back rest with 90 adjustability Fold forward side rails with built in push handles 29" or 31" bed width 4" comfort mattress 2 hook removable telescopic IV pole 6 IV pole sockets available Large storage area underneath for patient belongings Full perimeter bumper to protect your walls and fixtures 4 restraint belt locations Overall Outside Width 33 9/16" (852.49mm) Overall Outside Width 35 9/16" (903.29mm) Retractable Fifth Wheel PTF1000 Overall Outside Length 83 5/16" ( mm) 29" Bed Width Patient Surface Outside Length 75 7/16" ( mm) PTF Overall Outside Length 83 5/16" ( mm) 31" Bed Width Patient Surface Outside Length 75 7/16" ( mm) PTF1000 Height Adjustment Ranges (PTF1000 & PTF ) 750 POUND Weight Capacity Patient Surface Outside Width 29 1/8" (739.77mm) Patient Surface Outside Width 31 1/8" (790.57mm) Which Stretcher is right for your facility? Stretcher Comparison Chart Standard Features 750 lb. weight capacity Retractable center fifth wheel Height adjustment range: 22" 35" (bottom of mattress) Ergonomically located oxygen tank holder 8" Tente casters (1 directional & 3 swiveling) 8" Tente casters (4 swiveling) 6 brake/steer pedals pedestal lift mechanism Lift/Trendelenburg pedals on both sides Trendelenburg & reverse Trendelenburg +/- 18 Fowler assisted lift back rest with 90 adjustability Fold forward side rails with built in push handles 29" or 31" bed width 4" comfort mattress 2 hook removable telescopic IV pole 6 IV pole sockets available Large storage area underneath for patient belongings Perimeter bumper to protect your walls and fixtures 4 restraint belt locations Optional Features 5th wheel add-on kit Fold down push handles Knee gatch Paper roll dispenser kit * Detachable foot board * Envelope style rail bumper pads * * Additional lead time required (7-10 business days) PT1001 PT1001 For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. PTF1000 PTF1000 Fold down push handles Knee gatch Paper roll dispenser kit * Detachable foot board * Envelope style rail bumper pads * * Additional lead time required (7-10 business days) Fully Extended Height 35" (889mm) Lowest Height Position 22" (558.8mm) Fully Extended Height 51" ( mm) Lowest Height Position 38" (965.19mm) 18 Transport Stretchers Call Toll Free: Transport Stretchers

12 SS-Series Surgical Scrub Sinks Stainless Steel Sinks Manufactured with the highest quality possible, we deliver a full line of fully functional Surgical Scrub Sinks & Processing Sinks. Combining the best materials, components, and craftsmanship available, each sink is customized to each customer's specific needs. The SS-Series is our premier line of surgical scrub sinks. These sinks combine the best material, components, and craftsmanship available on the market today., dual, or triple stations Deep sloping basin Adjustable thermostatic controlled pressure regulating mixing valve (one per station) Knee operated water & soap (optional with IR sinks) Check stop strainers for ease of maintenance High mount swivel gooseneck spout with adjustable swivel spray aerator Flow control valve Backflow preventers Infrared sinks are equipped with a 24 volt plug in transformer Splash screen dividers with double and triple station sinks Main support and Z-brackets (wall support optional) 304 stainless steel polished and ground to a #4 finish Standard SS-Series Models OSHPD Pre-Approved Infrared operation Infrared soap dispenser Manual bypass to add knee operated water & soap with IR operation Knee operated soap with IR water operation Foot operated water Foot operated soap Digital scrub timer Eye wash Thermostatic mixing valve (add on to eye wash option) Laminar flow 220/240V power supply Pedestal base In-wall chair carrier Wall shelf over sink Lighted wall shelf over sink SS "D x 32"W x 37"H SS64 SS "D x 64"W x 37"H 27.5"D x 96"H x 37"H SS32 Station SS64 Station SS96 Triple Station Recommended Optional Products In-Wall Chair Carrier # Shelf Over Sink # Lighted Shelf Over Sink # SS32 SS64 S0001 S0002 SH0001 (12" D x 32" W) SH0002 (12" D x 64" W) SH0001-L SH0002-L Optional Shelf Over Sink (SH0001 shown) SS96 S0003 SH0003 (12" D x 96" W) SH0003-L 20 Stainless Steel Sinks Call Toll Free: Stainless Steel Sinks

13 Stainless steel access panels SS96 (shown with multiple optional features) SS-Series Features Tall swivel gooseneck spout Stainless steel soap spout Infrared sensor Adjustable thermostatic mixing valve Splash screen divider Knee operated water Digital scrub timer Knee operated soap Eye wash station ES-Series Surgical Scrub Sinks Our ES-Series Surgical Scrub Sinks were developed to answer space and economical constraints where needed. These sinks have smaller outside dimensions but still maintain a deep basin to allow for proper scrubbing. The operation is the same as the SS-Series, however features do vary., dual, or triple stations Deep sloping basin Adjustable thermostatic controlled pressure regulating mixing valve (one per station, mounted under sink) Knee operated water (optional with IR sinks) High mount swivel gooseneck spout with adjustable swivel spray aerator Flow control valve Backflow preventers Infrared sinks are equipped with a 24 volt plug in transformer Z-brackets (see specifications on rear panel for wall support) 304 stainless steel polished and ground to a #4 finish Standard ES-Series Models ES "D x 20.5"W x 25"H OSHPD Pre-Approved Infrared operation Manual bypass to add knee operated water with IR operation Knee operated soap Knee operated soap with IR water operation Foot operated water Foot operated soap Digital scrub timer Eye wash Thermostatic mixing valve (add on to eye wash option) Laminar flow 220/240V power supply Pedestal base Utility Requirements Utility Connection On Unit Pressure Range Temperature Consumption Optional Infrared Soap Dispenser ES47 ES "D x 20.5"W x 47"H 23.5"D x 20.5"H x 76"H Drain 1 1/2" x 6" Tail Piece N/A N/A N/A Cold Water 1/2" NPT PSIG 70 F. Max 2 GPM Per Station Hot Water 1/2" NPT PSIG 180 F. Max 2 GPM Per Station (IR Units Only) 120V N/A N/A N/A Only available for the SS-Series Surgical Scrub Sinks ES25 Station ES47 Station ES76 Triple Station How to Order SS-Series How to Order ES-Series Infrared Operation Infrared Soap Dispenser Manual Bypass to add Knee Operated Water and Soap with IR Operation Knee Operated Water with IR Operation Knee Operated Soap with IR Operation Foot Operated Water Foot Operated Soap Digital Scrub Timer Eye Wash Thermostatic Mixing Valve (add on to Eye Wash option) Laminar Flow 220/240V Pedestal Base Infrared Operation Manual Bypass to add Knee Operated Water with IR Operation Knee Operated Soap with IR Operation Foot Operated Water Foot Operated Soap Digital Scrub Timer Eye Wash Thermostatic Mixing Valve (add on to Eye Wash option) Laminar Flow 220/240V Pedestal Base IR IRD MB KOW KSP FOW FSP TM EYE TV LF 220 PB IR MB KSP FOW FSP TM EYE TV LF 220 PB Example 1: SS32 with Infrared Soap Dispenser, Digital Scrub Timer, and Pedestal Base = Model # SS32-IRD-TM-PB Example 2: SS96 with Foot Operated Water, Eye Wash, and Laminar Flow = Model # SS96-FOW-EYE-LF Example 1: ES25 with Infrared Operation, Manual Bypass to add Knee Operated Water & Soap, Digital Scrub Timers, and Pedestal Base = Model # ES25-IR-MB-TM-PB Example 1: ES47 with Laminar Flow = Model # ES47-LF 22 Stainless Steel Sinks Call Toll Free: Stainless Steel Sinks

14 Ergonomically Friendly Processing Sinks Pipe Base Units Processing Sinks Cabinet Base Units Pipe base, dual, or triple basins Fully welded construction with reinforced tops Right to left workflow or left to right workflow 37" standard height for stationary sinks 4" backsplash Under shelf Adjustable feet Drain boards Etched gallon markings Basin size: 24"W x 17"L x 10"D Full CAD rendering of specified sink Multiple layouts for individual requirements All sinks can be manufactured to individual specs Ergonomically friendly electronic adjustable height with four position programming - Electronic adjustable height range: 35" 42" Wrap around apron Mixing valve faucet Pre-rinse faucet DI water Air gun (with 5 tips) Water gun (with 8 tips) Eye wash Shut off valve 6" backsplash 8" backsplash 12" backsplash Side splash Tubing manifold Hand lever drains PS (electronic adjustable height shown with left to right workflow and optional pre-rinse faucet, DI water, air gun, and water gun) Standard Pipe Base Models (Stationary) PS PS PS Standard Pipe Base Models (Electronic Adjustable Height) PS PS Foot operated drains (not available for adjustable height units) Copper drain system (single, dual, and triple) Overhead LED hood PS R Note: ETL compliance for adjustable height models only. 26"D x 72"W x 37"H, Basin 26"D x 96"W x 37"H, Basin 26"D x 120"W x 37"H, Triple Basin 26"D x 72"W x 35"H, Basin 26"D x 96"W x 35"H, Basin 26"D x 120"W x 35"H, Triple Basin Cabinet base (door, drawer, or open shelf combination), dual, or triple basins Fully welded construction with reinforced tops Right to left workflow or left to right workflow 37" standard stationary height 4" backsplash Drain boards Under shelf and one adjustable shelf Etched gallon markings Basin size: 24"W x 17"L x 10"D Full CAD rendering of specified sink Multiple layouts for individual requirements All sinks can be manufactured to individual specs Mixing valve faucet Pre-rinse faucet DI water Air gun (with 5 tips) Water gun (with 8 tips) Eye wash Shut off valve 6" backsplash 8" backsplash 12" backsplash Side splash Tubing manifold Hand lever drains Foot operated drains Copper drain system (single, dual, and triple) Overhead LED hood PS (shown with left to right workflow and optional pre-rinse faucet, DI water, air gun, and water gun) R Standard Cabinet Base Models PS PS PS "D x 72.5"W x 37"H, Basin 26"D x 96.5"W x 37"H, Basin 26"D x 120.5"W x 37"H, Triple Basin Note: Electronic adjustable height not an option for cabinet base units 24 Stainless Steel Sinks Call Toll Free: Stainless Steel Sinks

15 Stainless Steel Cabinets MAC Medical, Inc. manufactures a full line of stainless steel cabinets including Wall Cabinets, Base Cabinets, Desk Cabinets, Supply Cabinets, and Nurses Documentation Stations. All cabinets can be configured and arranged in a number of ways to create a custom bank of cabinets. In addition, all units have many optional features to choose from. Whether you need a complete renovation or a new construction, we can work with your elevation plans and facility planners to meet any specific need. As with all our products, all stainless steel cabinets are built with quality and durability in mind. Wall Cabinets Fully welded construction Glass hinged doors Stainless steel adjustable shelves Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawing Multiple layouts for individual requirements Stainless steel doors Sliding glass doors (only available for 36" & 48" widths) No doors Key lock Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Sloped top (adds 6" to total height) STANDARD SIZES Depths: 13" Widths: 24", 30", 36", and 48" Heights: 18", 24", and 30" STANDARD SHELVING 1 shelf for 18" & 24" heights 2 shelves for 30" height Note: Shelving adjusts in 1 1/2" increments Wall Cabinet 26 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

16 Desk Cabinets Base Cabinets Free standing Fully welded construction Standard handles Fully welded construction Full CAD renderings Engineered room layouts in CAD based on customer provided drawing Stainless steel doors Multiple layouts for individual requirements Stainless steel adjustable shelf Standard handles 4" backsplash Full CAD renderings Engineered room layouts in CAD based on customer provided drawing Multiple layouts for individual requirements STANDARD SIZES Depths: 24" Widths: 24", 30", 36", and 48" Heights: 36" Note: Shelving adjusts in 1 1/2" increments Glass hinged doors No doors Drawers Key lock Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pull out writing surface Variable height bases Base Cabinet Recessed Stainless steel doors Glass hinged doors No doors Drawers Sloping work surface Pull out writing surface Fluorescent light fixture Key lock Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back STANDARD FREE STANDING SIZES Depths: 18" & 24" Widths: 24", 30", and 36" Heights: 60", 64", 72", 78", and 84" STANDARD RECESSED SIZES Depths: 18" & 24" Widths: 24", 30", and 36" Heights: 56", 60", 68", 74", and 80" Recessed Desk Cabinet (shown with optional sloping working surface and drawers) Pass through construction Sloped top (adds 6" to total height, only available for free standing cabinets) Casters (adds 2 1/2" to total height, only available for free standing cabinets) Variable height bases (only available for free standing cabinets) 28 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

17 Scope Cabinets Supply Cabinets Fully welded construction Glass hinged doors with louvered vents Scope hangers Free standing Fully welded construction Lower rack to keep scopes aligned Removable drain pan Padded back wall to prevent damage Glass hinged doors Stainless steel adjustable shelves Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawings Free Standing Supply Cabinet (shown with optional sloped top and variable height base) Power vent (includes ventilation fan, digital time switch, and HEPA filter) Sloped top (adds 6" to total height) IC (shown with optional power vent) Multiple layouts for individual requirements Recessed Stainless steel doors Sliding glass doors (only available for 36" & 48" widths) No doors Drawers Key lock Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Pass through construction Sloped top (adds 6" to total height, only available for free standing cabinets) Casters (adds 2 1/2" to total height, only available for free standing cabinets) Variable height bases (only available for free standing cabinets) STANDARD FREE STANDING SIZES Depths: 18" & 24" Widths: 24", 30", 36", and 48" Heights: 60", 64", 72", 78", and 84" STANDARD RECESSED SIZES Depths: 18" & 24" Widths: 24", 30", 36", and 48" Heights: 56", 60", 68", 74", and 80" STANDARD SHELVING Free Standing Cabinets 3 shelves for 60" & 64" heights 4 shelves for 72" & 78" heights 5 shelves for 84" heights Recessed Cabinets 3 shelves for 56" & 60" heights 4 shelves for 68" & 74" heights Louvered Vents (top and bottom on both doors) Glass Hinged Door Padded Back Wall Power Vent (optional) Removable Drain Pan Scope Hangers Lower Alignment Rack IC IC "D x 36"W x 92"H 18"D x 42"W x 92"H # of Scope Hangers 9 or or 22 5 shelves for 80" heights Note: Additional shelving available for purchase. Shelving adjusts in 1 1/2" increments. 30 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

18 Configured Cabinets Nurses Documentation Stations Wall Cabinet MAC Medical, Inc. can help you design a complete stainless steel cabinetry build out to meet any custom requirement your facility may have. Any arrangement of wall cabinets, base cabinets, desk cabinets, supply cabinets, and even warming cabinets can easily be configured to create a continuous bank of cabinets. In addition, all cabinets come with a variety of optional features to choose from. Whether you need a complete renovation or have a new construction, let us work with your elevation plans and facility planners to meet your specific requirements. Supply Cabinets Wall Cabinet Sloped Top Free standing Fully welded construction Standard Handles Configuration includes wall cabinet, base cabinet, and tower cabinet (tower cabinet can be configured on either side) Stainless steel adjustable shelves Standard handles Heavy duty pull out drawers Integrated wire management system Full CAD renderings Engineered room layouts in CAD based on customer provided drawings NDS (shown with multiple optional features) Glass Hinged Doors Adjustable Shelving Multiple layouts for individual requirements Tower Cabinet Variable Height Bases Recessed Stainless steel doors Glass hinged doors Vented doors for electronics No doors Pull out writing surface Pull out bottom shelf for easy PC install Key lock Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Sloped top (adds 6" to total height, only available for free standing cabinets) Variable height bases (only available for free standing cabinets) Base Cabinet Standard Model NDS "D x 78"W x 84"H Note: Additional shelving available for purchase, shelving adjusts in 1 1/2" increments Unit Configuration Wall Cabinet (NDS WC) Base Cabinet (NDS BC Tower Cabinet (NDS DDU) Pull Out Writing Surface * Free standing Fully welded construction Stainless steel adjustable shelves Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawings Multiple layouts for individual requirements Base Cabinet * Recessed Stainless steel doors Glass hinged doors Sliding glass doors Vented doors for electronics No doors Drawers Sloping work surface Pull out writing surface Overhead lighting Fluorescent light fixture For guidance on a specific custom cabinet configuration, contact our customer service department at or , or by at sales@macmedical.com. Vented Doors for Electronics Key lock Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Pass through construction Sloped top (adds 6" to total height) Variable height bases Custom sizes available * Standard & optional features vary based on cabinet type 32 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

19 Instrument Tables Stainless Steel Tables MAC Medical, Inc. manufactures a full line of stainless steel tables including Instrument Tables, Utility Tables, Nested Tables, Work Tables, Space Saver Tables, Adjustable Over Operating Tables, Central Supply Tables, and Prep & Pack Workstations. Fully welded construction Reinforced tops Stainless steel legs (1 1/4" 16 gauge) Stainless steel top (16 gauge type 300 series) Stainless steel under shelf (18 gauge type 300 series) 2" swivel casters T0001 T0002 T0004 (shown with optional U brace & 3" locking casters) 16"W x 20"D x 34"H 16"W x 30"D x 34"H 3" swivel casters Locking casters Drawers under all sizes Guard rails on 3 sides (available on top or bottom shelf) Guard rails on all 4 sides (available on top or bottom shelf) H or U brace instead of under shelf Side extensions 1" lip on back Multiple under shelves T0003 T0004 T0005 T0006 T0049 T0053 T0054 T0058 T0059 T "W x 36"D x 34"H 24"W x 48"D x 34"H 24"W x 60"D x 34"H 24"W x 72"D x 34"H 20"W x 48"D x 34"H 28"W x 30"D x 34"H 30"W x 72"D x 34"H 20"W x 36"D x 34"H 30"W x 60"D x 34"H 18"W x 33"D x 34"H T "W x 36"D x 36"H T "W x 20"D x 34"H T Stainless Steel Tables Call Toll Free: Stainless Steel Tables

20 Utility Tables Fully welded construction 1 under shelf Top guard rail (on 3 sides) 3" casters (2 swivel & 2 locking) Multiple under shelves No guard rail T0086 T0077 T0096 T0097 T D-GR 16"W x 20"D x 34"H 16"W x 20"D x 34"H 16"W x 20"D x 34"H 16"W x 20"D x 34"H 18"W x 33"D x 34"H Drawers Work Tables Fully welded construction Reinforced stainless steel top (16 gauge type 300 series) Stainless steel under shelf (18 gauge type 300 series) 2" square legs Added supports 5" casters (2 swivel & 2 locking) Ergonomically friendly adjustable heights (manual or electronic) Manual adjustable height range: 36" 55" Electronic adjustable height range: 36" 43" WT0003 WT0004 WT0005 WT0054 WT0055 Ergonomically Friendly WT0003 (shown with optional manual adjustable height & H brace) 24"W x 36"D x 36"H 24"W x 48"D x 36"H 24"W x 60"D x 36"H 30"W x 72"D x 36"H 36"W x 72"D x 36"H T D-GR T D-GR 18"W x 33"D x 34"H 18"W x 33"D x 34"H 2 3 H or U brace instead of under shelf Full base unit underneath Drawers under all sizes WT "W x 60"D x 36"H T0086 T D-GR Stainless steel guard rails Multiple under shelves Nested Tables Model # T0089 Set of 6 (T0090 through T0095) Space Saver Tables Fold down top shelf! T0089 (set of 6) Fully welded construction Stainless steel legs (1 1/4" 16 gauge) Stainless steel tops (16 gauge type 304) Stainless steel U brace (1 1/4" 16 gauge) 2" swivel casters T0090 T0091 T0092 T0093 T0094 T "W x 48"D x 42"H 22"W x 44"D x 40"H 20"W x 40"D x 38"H 18"W x 36"D x 36"H 16"W x 32"D x 34"H 14"W x 28"D x 32"H Fold down top shelf with lip (space saving feature!) One under shelf 2" square legs 4" casters TSPS (shown with optional manual adjustable height) Ergonomically Friendly Ergonomically friendly adjustable heights (manual or electronic) Manual adjustable height range: 36" 55" Electronic adjustable height range: 36" 54" TSPS TSPS Note: Additional sizes available for specific requirements, please contact us for further assistance Note: Model # will change based on features added 60"W x 30"D x 36"H 72"W x 30"D x 36"H 36 Stainless Steel Tables Call Toll Free: Stainless Steel Tables

21 Adjustable Over Operating Tables Prep & Pack Workstations Ergonomically friendly manual adjustable height Manual adjustable height range: 36.5" 48.25" 3" casters (2 swivel & 2 locking) 1" lip on back Ergonomically Friendly T Designed with ergonomics in mind, the Prep & Pack Workstations feature a modular design, allowing for multiple configurations and adjustability for all body types. Choose from the many optional features including adjustable height (manual or electronic), overhead light, articulating magnification light, CPU holder, electrical strip, and more. T (height at lowest setting) 34"W x 42"D x 36.5"H 100% stainless steel construction Modular design allows for multiple configurations Ergonomically Friendly TWS-3672 (shown with multiple optional features) T T "W x 24"D x 36.5"H 60"W x 24"D x 36.5"H Integrated footrest 4" casters (2 swivel & 2 locking) Ergonomically friendly adjustable heights (manual or electronic) Adjustable height range: 36" 44" Bin rail Overhead light Central Supply Tables Articulating magnification light strip CPU holder Pull out keyboard tray Magnetic dry erase board Base Model # TWS-3060 TWS-3072 (height at lowest setting) 60"W x 32.25"D x 81"H 72"W x 32.25"D x 81"H Heavy duty, stainless steel construction One under shelf 4" casters (2 swivel & 2 locking) Sterile frame 6" plastic bin CST "W x 32"D x 34"H CST "W x 24"D x 34"H CST3260 (shown with optional sterile frame) Adjustable flat shelf for riser frame Adjustable angled shelf for riser frame Lower shelf Side mount waste basket holder with waste basket Spool holder Drawer boxes 6" drawer box Double 6" drawer box TWS-3660 TWS "W x 38.25"D x 81"H 72"W x 38.25"D x 81"H 10" plastic bin Drawer CST "W x 36"D x 34"H 38 Stainless Steel Tables Call Toll Free: Stainless Steel Tables

22 Closed Case Carts Stainless Steel Carts MAC Medical, Inc. manufactures a full line of stainless steel carts that feature fully welded construction for strength and durability. Choose from standard designs or have our engineering department custom design any specific case cart to satisfy any need your facility may have. Fully welded construction 8.5" x 11" card holder Sound-proofed tops and doors for quiet operation Adjustable perforated roll out stainless steel shelves Redesigned functionality! Exterior push handle for better control Full wrap around non-marring bumper Tamper evidence security tab Positive lock door latches 6" maintenance-free, high temp, high pressure stainless steel casters with sealed ball bearings (3 swivel & 1 fixed directional) MMCC7 Adjustable solid shelf (roll out) Redesigned functionality! Adjustable solid shelf (non roll out) Adjustable perforated shelf (non roll out) Adjustable wire shelf (roll out) Redesigned functionality! Adjustable wire shelf (non roll out) No shelves Side extensions Flag system (one each of red, yellow, and green) Clean/dirty indicator Tow hitch Composite directional locking casters Total locking casters Case Dimensions Doors Adjustable Shelves MMCC2 28.5"W x 28.5"D x 47.25"H 34"W x "D x "H 1 2 MMCC "W x 25"D x 30.25"H 46"W x "D x "H 2 1 MMCC "W x 25"D x 47.25"H 46"W x "D x "H 2 2 MMCC5 36"W x 25"D x 47.25"H 41.75"W x "D x "H 2 2 MMCC "W x 25"D x 30.5"H "W x "D x "H 1 1 MMCC7 36"W x 25"D x 44.5"H 41.75"W x "D x "H 2 2 MMCC "W x 25"D x 28.5"H 28.75"W x "D x "H 1 1 MMCC "W x 25"D x 46.25"H "W x "D x "H 1 2 MMCC12 36"W x 25"D x 31"H 41.75"W x "D x 40"H 2 1 MMCC "W x "D x 31.25"H 52.25"W x 29"D x 40.25"H 2 2 Note: Additional shelving available for purchase, shelving adjusts in 3" increments 40 Stainless Steel Carts Call Toll Free: Stainless Steel Carts

23 Vertical Handle Case Carts Ergonomically Friendly Open Case Carts MMOCC16 (shown with 3 optional adjustable solid shelves) MMOCC19 (shown with optional fixed top shelf and 1 optional adjustable wire shelf) MMOCC21 (shown with 3 optional adjustable wire shelves) Open design Sturdy built cart perfect for storage, supplies, linens, or distribution Full wrap around non-marring bumper Stainless steel guard rail 6" composite directional locking casters Adjustable solid shelf (non roll out) Adjustable perforated shelf (non roll out) Adjustable wire shelf (non roll out) Fixed shelving Wire grid on back side 6" maintenance-free, high temp, high pressure stainless steel casters with sealed ball bearings (3 swivel & 1 fixed directional) Total locking casters 6" plastic bin 10" plastic bin MMOCC13 MMOCC16 MMOCC18 MMOCC19 MMOCC21 MMOCC24 MMOCC25 Note: Shelves ordered separately "W x "D x 37.5"H "W x "D x 67.25"H 27"W x 40.75"D x 37"H "W x 40.75"D x 39"H 29.75"W x 29.75"D x 62"H 24"W x 30"D x 54"H 24"W x 24"D x 54"H Note: Some values are rounded up to the next 1/8" for simplicity Ergonomically friendly vertical handles for precise control Fully welded construction 8.5" x 11" card holder Sound-proofed tops and doors for quiet operation Adjustable perforated roll out stainless steel shelves Redesigned functionality! Full wrap around non-marring bumper Tamper evidence security tabs Positive lock door latches 6" maintenance-free, high temp, high pressure stainless steel casters with sealed ball bearings (3 swivel & 1 fixed directional) Adjustable solid shelf (roll out) Redesigned functionality! Adjustable solid shelf (non roll out) Adjustable perforated shelf (non roll out) Adjustable wire shelf (roll out) Redesigned functionality! Adjustable wire shelf (non roll out) No shelves Side extensions Flag system (one each of red, yellow, and green) Clean/dirty indicator Tow hitch Cool touch handles Composite directional locking casters Total locking casters Silicon door gasket for complete sterility control Cool touch handles New! Utility Carts AL-200 (A-Frame Design) MMCV95 MMCV107 Case Dimensions 36.25"W x 26.5"D x 40.75"H 40"W x 24.75"D x 38.75"H 48.25"W x 27.75"D x 53"H 48.75"W x 26"D x 51"H Note: Additional shelving available for purchase, shelving adjusts in 3" increments Fully welded stainless steel construction 3-sided 1" lip (on top & middle shelf) to keep items from rolling off Front side turned down (on top & middle shelf) for easier access Open design for easy cleaning & sanitizing Non-locking swivel casters Push handle 200 lb. overall weight capacity Standard Model Locking casters Additional shelves Customized shelf size & spacing MMCV95 19"D x 38.5"W x 35.5"H Optional Cool Touch Handles Available for any of our Vertical Handle Case Carts (or any 1" diameter vertical handle) Retrofit kit includes two Cool Touch Handles and corresponding hardware (Part # WC KT) 42 Stainless Steel Carts Call Toll Free: Stainless Steel Carts

24 Solution Stands Stainless Steel Stands MAC Medical, Inc. manufactures a full line of stainless steel stands including Solution Stands, IV Stands, and Mayo Stands. Fully welded stainless steel construction and double basin designs available Available with lower shelf SOL-1000 : 14"W x 14"D x 34"H Removable 7 quart stainless steel basin Open frame design allows accessibility from any side 2" swivel casters SOL-1001 Same as SOL-1000 except with stainless steel lower shelf Removable 7 quart stainless steel basin SOL /2 quart basin SOL /2 quart basin SOL-1000 SOL-1001 SOL-2000 SOL-2001 : 14"W x 28"D x 34"H Same as SOL-2000 except with stainless steel lower shelf Two removable 7 quart stainless steel basins Two removable 7 quart stainless steel basin SOL SOL SOL /2 quart basins SOL /2 quart basins 44 Stainless Steel Stands Call Toll Free: Stainless Steel Stands

25 Mayo Stands IV Stands Stainless steel construction Height adjustment range: 68" 108" 65 lb. weight capacity * (10 lbs. per hook) Tip resistant base * Load must be evenly distributed for stability 2" swivel casters IVS-3000 Series Foot operated 5-leg stand Welded base IVS-3002 Two hook design IVS-4000 Series Foot operated 4-leg stand Welded base IVS-4002 Two hook design Full welded stainless steel construction Height adjustment range: 36" 58" 2" swivel casters MYO-2000 Mobile base MYO-2000 Removable 21 1/4" x 16 1/4" stainless steel tray Foot operated friction lock height adjustment/dual post 50 lb. weight capacity MYO-2001 Same as MYO-2000 except 19 1/8" x 12 5/8" stainless steel tray MYO-2002 Same as MYO-2000 except 25" x 20" stainless steel tray IVS-3006 IVS-3004 Four hook design IVS-3006 Six hook design IVS-5000 Series Hand operated 4-leg stand Knock down version (assembly required) IVS-4004 IVS-4004 Four hook design IVS-4006 Six hook design IVS-6000 Series Hand operated 6-leg stand Knock down version (assembly required) MYO-3000 MYO-3000 Removable 21 1/4" x 16 1/4" stainless steel tray Hand operated friction lock height adjustment/dual post 50 lb. weight capacity MYO-3001 Same as MYO-3000 except 19 1/8" x 12 5/8" stainless steel tray MYO-3002 Same as MYO-3000 except 25" x 20" stainless steel tray IVS-5002 Two hook design IVS-5004 Four hook design IVS-6002 Two hook design IVS-6004 Four hook design MYO-4000 Removable 21 1/4" x 16 1/4" stainless steel tray Manual knob operated adjustment/single post 40 lb. weight capacity IVS-5002 IVS-5006 Six hook design IVS-7000 Series Hand operated 5-leg stand Knock down version (assembly required) IVS-7002 Two hook design IVS-7004 Four hook design IVS-6004 IVS-6006 Six hook design MYO-4000 MYO-4001 Same as MYO-4000 except 19 1/8" x 12 5/8" stainless steel tray MYO-5000 Removable 21 1/4" x 16 1/4" stainless steel tray Foot operated friction lock height adjustment/single post 40 lb. weight capacity MYO-5001 Same as MYO-5000 except 19 1/8" x 12 5/8" stainless steel tray Optional mobile base available for all models (Part # MB) IVS-7004 IVS-7006 Six hook design MYO Stainless Steel Stands Call Toll Free: Stainless Steel Stands

26 Other Stainless Steel Products MAC Medical, Inc. manufactures several other stainless steel products including Linen Hampers, Kick Buckets, Step Stools, Wall Shelves, Pass Through Windows, and Peg Boards. Linen Hampers Fully welded, heavy gauge all stainless steel construction Heavy gauge stainless steel platform to support bags and ease of removal 2" swivel casters Foot operated stainless steel lid Rotating bumper guards over casters LH-1000 Overall dimensions: 35"H x 57 1/4"perimeter Accommodates 18" diameter bags LH-1001 Optional foot operated stainless steel lid available on all models (Part # FOL) Overall dimensions: 35"H x 78 5/8"perimeter Accommodates 25" diameter bags LH-2000 Overall dimensions: 35"H x 18"diameter Accommodates 18" diameter bags LH-2001 Overall dimensions: 35"H x 25"diameter Accommodates 25" diameter bags 48 Other Stainless Steel Products Call Toll Free: Other Stainless Steel Products

27 Wall Shelves Kick Buckets Stainless steel construction Pre-drilled for easy wall mounting (mounting hardware not included) Stainless steel frame Model # Overall Size Perimeter bumper to protect walls Tip resistant 2" swivel casters KB-1000 KB-2000 SH0624 SH0630 SH0824 6"D x 24"W 6"D x 30"W 8"D x 24"W SH0624 Overall dimensions: 14"H x 13 1/2"diameter Removable 13 quart stainless steel basin Overall dimensions: 8"H x 16 1/4"diameter Removable 9 1/2 quart stainless steel basin SH0830 SH0832 SH0836 8"D x 30"W 8"D x 32"W 8"D x 36"W SH0001 SH "D x 32"W 12"D x 36"W Step Stools T0800 (optional transport cart) SH1260 SH0002 SH "D x 60"W 12"D x 64"W 12"D x 96"W Note: Additional sizes available for specific requirements, please contact us for further assistance SH0832 Heavy-duty, stainless steel construction Tip resistant Corrugated, black rubber top surface on each stool Rubber floor tips step stools (STS121805) are stackable and connect together to create a large platform STS SH1260 Easy roll around transport cart with 4 swiveling casters (2 locking) available for STS holds up to 5 single step stools Model # STS (single step) STS (two steps) T0800 (optional transport cart) 18"W x 12"D x 6.25"H 30"W x 18"D x 15"H 20"W x 19"D x 35"H Weight Capacity 650 lbs. 350 lbs. 50 Other Stainless Steel Products Call Toll Free: Other Stainless Steel Products

28 Pass Through Windows Peg Boards 3/16" tempered glass Adjustable width for wall thickness (between 4" 6") 16 gauge stainless steel construction (1/16" thickness, 5/8" overall thickness from wall) 1/4" diameter holes on 1" center Height Decontamination side shelf (various sizes) PTW0002 Key hole slots for mounting (mounting hardware not included) Clean side shelf (various sizes) SSPEG4872 Width Outside Dimensions PTW "W x 34.5"L (no shelf) PTW "W x 34.5"L (shelf included) Standard Hooks PTW0003 PTW "W x 34.5"L (no shelf) 26.25"W x 74"L (window & door combination, shelf included) Model # SSPEG "W x 36"H Model # IC Hook Size 3-3/32" stainless steel single peg board hook (fits 3/16" & 1/4" diameter holes) SSPEG3636 SSPEG "W x 36"H 36"W x 48"H IC IC /16" stainless steel single peg board hook (fits 3/16" & 1/4" diameter holes) 8-3/4" stainless steel single peg board hook (fits 3/16" & 1/4" diameter holes) SSPEG "W x 48"H IC0901 8" stainless steel single peg board hook (fits 1/4" diameter holes) SSPEG "W x 48"H IC " stainless steel single peg board hook (fits 1/4" diameter holes) SSPEG4872 SSPEG "W x 72"H 48"W x 96"H Note: Additional sizes available for specific requirements, please contact us for further assistance Note: All hooks are compatible with all peg board models and are sold separately ICO901 PTW Other Stainless Steel Products Call Toll Free: Other Stainless Steel Products

29 MR Conditional Products MAC Medical, Inc's line of MR Conditional Products can safely equip your MR rooms. The sturdy, low maintenance stainless steel construction allows our products to be placed in any magnetic resonance environment. MR Conditional Mayo Stands Equipped for any magnetic resonance environment Full welded stainless steel construction Height adjustment range: 36" 58" 2" swivel casters MYO-3001-MRI Removable 19 1/8" x 12 5/8" stainless steel tray Hand operated friction lock height adjustment/dual post 50 lb. weight capacity Mobile base (Part # MB) MYO-4001-MRI Removable 19 1/8" x 12 5/8" stainless steel tray Manual knob operated adjustment/single post 40 lb. weight capacity MYO-3001-MRI MYO-4001-MRI MR Conditional Solution Stands Equipped for any magnetic resonance environment Fully welded stainless steel construction Stainless steel lower shelf Open frame design allows accessibility from any side 2" swivel casters SOL-1001-MRI : 14"W x 14"D x 34"H Removable 7 quart stainless steel basin SOL-2001-MRI : 14"W x 28"D x 34"H Two removable 7 quart stainless steel basin SOL MRI 9 1/2 quart basin SOL-2001-MRI SOL MRI 9 1/2 quart basins SOL-1001-MRI 54 MR Conditional Products Call Toll Free: MR Conditional Products

30 MR Conditional Kick Buckets Equipped for any magnetic resonance environment Stainless steel frame MR Conditional Linen Hampers Perimeter bumper to protect walls Tip resistant 2" swivel casters KB-1000-MRI Overall dimensions: 14"H x 13 1/2"diameter KB-2000-MRI Overall dimensions: 8"H x 16 1/4"diameter Removable 13 quart stainless steel basin Removable 9 1/2 quart stainless steel basin Equipped for any magnetic resonance environment Fully welded, heavy gauge all stainless steel construction Heavy gauge stainless steel platform to support bags and ease of removal 2" swivel casters Optional foot operated stainless steel lid available on all models (Part # FOL) MR Conditional IV Stands Foot operated stainless steel lid Rotating bumper guards over casters LH-1000-MRI Overall dimensions: 35"H x 57 1/4"perimeter Accommodates 18" diameter bags LH-1001-MRI Overall dimensions: 35"H x 78 5/8"perimeter Accommodates 25" diameter bags Equipped for any magnetic resonance environment Stainless steel construction 65 lb. weight capacity * (10 lbs. per hook) * Load must be evenly distributed for stability Height adjustment range: 68" 108" Knock down version (assembly required) Hand operated Tip resistant base IVS-5002-MRI Two hook design 4 leg stand IVS-5004-MRI Four hook design 4 leg stand IVS-5002-MRI IVS-7002-MRI Two hook design 5 leg stand IVS-7004-MRI Four hook design 5 leg stand IVS-7004-MRI 2" swivel casters LH-2000-MRI LH-2001-MRI MR Conditional Step Stools Overall dimensions: 35"H x 18"diameter Accommodates 18" diameter bags Overall dimensions: 35"H x 25"diameter Accommodates 25" diameter bags Equipped for any magnetic resonance environment Heavy duty, stainless steel construction STS SMRI step stools are stackable Model # Weight Capacity step stools connect together to create a large platform STS MRI (single step) 18"W x 12"D x 5.25"H 650 lbs. Corrugated, black rubber top surface on each stool Tip resistant STS SMRI (two steps) 24"W x 16"D x 16"H 350 lbs. Rubber floor tips 56 MR Conditional Products Call Toll Free: MR Conditional Products

31 MR Conditional Instrument Tables Contact Us Equipped for any magnetic resonance environment Fully welded construction Reinforced tops Stainless steel legs (1 1/4" 16 gauge) Stainless steel top (16 gauge type 300 series) Stainless steel under shelf (18 gauge type 300 series) 2" swivel casters 3" swivel casters Locking casters Drawers under all sizes Guard rails on 3 sides (available on top or bottom shelf) Guard rails on all 4 sides (available on top or bottom shelf) H or U brace instead of under shelf Side extensions 1" lip on back Multiple under shelves T0058-MRI Standard MR Models T0001-MRI 16"W x 20"D x 34"H T0002-MRI 16"W x 30"D x 34"H T0003-MRI 24"W x 36"D x 34"H T0004-MRI 24"W x 48"D x 34"H T0005-MRI 24"W x 60"D x 34"H T0006-MRI 24"W x 72"D x 34"H T0049-MRI 20"W x 48"D x 34"H T0053-MRI 28"W x 30"D x 34"H T0054-MRI 30"W x 72"D x 34"H T0058-MRI 20"W x 36"D x 34"H Corporate Office 325 West Main Street Belleville, IL Manufacturing Plant 820 South Mulberry Street Millstadt, IL For questions or to place an order, contact our customer service department: Phone: Toll Free: Fax: sales@macmedical.com Website: T0059-MRI T0088-MRI T0101-MRI 30"W x 60"D x 34"H 18"W x 33"D x 34"H 30"W x 36"D x 36"H Customer needs are our first priority. T0115-MRI 20"W x 20"D x 34"H Note: Additional sizes available for specific requirements, please contact us for further assistance Note: Model # will change based on features added 58 MR Conditional Products Call Toll Free: Contact Us