CWX 3 - CWX 5 CASSETTE TYPE TERMINAL UNIT. Cooling

Size: px

Start display at page:

Download "CWX 3 - CWX 5 CASSETTE TYPE TERMINAL UNIT. Cooling"

Ilene Burns
5 years ago
Views:

TECHNICAL INSTRUCTIONS CWX 3 - CWX 5 CASSETTE TYPE TERMINAL UNIT Cooling Heating CWX 3 pipes.60 3.9 pipes + electric heating.

1 TECHNICAL INSTRUCTIONS CWX 3 - CWX 5 CASSETTE TYPE TERMINAL UNIT Cooling Heating CWX 3 pipes pipes + electric heating pipes.08.5 CWX 5 pipes pipes + electric heating pipes November GB - 03

2 MARKING This product marked conforms to the essential requirements of the Directives: - Low voltage no. 006/95/EC. - Electromagnetic Compatibility no. 89/336 EEC, modified 9/3 and 93/68 EEC. SUMMARY - Presentation... - Technical characteristics Physical characteristics... - Description Accessories PRESENTATION. - USE Unit intended for climate control in buildings and the comfort of people. Do not place the device in rooms with high humidity or exposed to projections of water.. - FUNCTIONS Cooling or heating by means of a -pipe water coil. Additional electric heating (model BE) or with additional hot water coil (model BW). Ventilation with filtration (built-in filter)..3 - APPLICATIONS This unit was designed for installation in locations such as offices, businesses and hotels.. - MODELS " tubes" for all sizes, with wire or infrared remote control: CWX B 5B and CWX B 5X. " tubes + electric heating" for all sizes, with wire remote control only: CWX BE 5B. " tubes" (with additional battery) for all sizes, with wire remote control only: CWX BW 5B.

3 - TECHNICAL CHARACTERISTICS. - NOMINAL CONDITIONS Total cooling capacity () HS MS LS Sensible cooling capacity () HS MS LS Heating capacity () HS MS LS Electric heating capacity Heating capacity (3) HS additional hot water coil MS LS Air flow rate HS m 3 /h m 3 /s MS m 3 /h m 3 /s LS m 3 /h m 3 /s Water flow rate in cooling () HS l/h Additional water flow rate (3) HS l/h Pressure drop on water in cooling mode () HS kpa Pressure drop on water in heating mode () HS kpa Pressure drop on water in add. HWC (3) HS kpa Pressure drop of the valve HS kpa Pressure drop of the additional HWC valve HS kpa Power supply V/ph/Hz Max. power consumption HS Max. current consumption HS A Hydraulic connection /" gas female Sound power level HS dba MS dba LS dba Sound pressure level (at m indoors) HS dba MS dba LS dba CWX 3 B // CWX 3 BE // CWX 3 BW // () Air inlet: 7 C (DB) / 9 C (WB) - Water inlet: 7 C - Water outlet: C. () Air inlet: 0 C - Water inlet 50 C (same flow-rate as under other conditions () (-pipes)). (3) Air inlet: 0 C - Water inlet 70 C ( pipes) - Water outlet: 60 C ( pipes) CWX 5 B // CWX 5 BE // CWX 5 BW // OTHER CONDITIONS Consult us. Operating limits: - Minimum water inlet temperature : C. - Maximum water inlet temperature : 60 C for the main coil, 80 C for the additional hot water coil. Note: For reasons relating to comfort (homogeneity of the air temperature in the room), not exceeding a water inlet temperature of 55 C in the main coil is recoended. - Maximum operating pressure of the hydraulic circuit :6 bar. - Minimum air recirculation temperature : 5 C. - Maximum air recirculation temperature : 3 C. 3

4 3 - PHYSICAL CHARACTERISTICS Ceiling Suspension brackets E C 70 Suspension brackets F G min H A B D 600 Suspension brackets Suspension bolt Ceiling min Fresh air intake side Nuts and washers 506 Electrical box Hydraulic connections side A Condensate opening : OD 8 B Main coil water inlet : /" gas female C Main coil water outlet : /" gas female D Additional coil water inlet : /" gas female E Additional coil water outlet : /" gas female F Main coil air bleeder G Additional coil air bleeder H New air intake : Ø 70 NET WEIGHT Unit Front panel / grille assembly CWX 3 8 kg.5 kg CWX 5 0 kg.5 kg PACKED UNITS Unit length width height weight kg Front panel length width height weight kg CWX CWX

5 - DESCRIPTION. - ALL MODELS Construction Material Polyethylene insulation Front panel material Front panel colour Electric box protection Copper/aluminium thermal exchanger of rows Frontal surface area m Pitch between fins Water capacity litres Connections Manual air bleeder Motor Power supply 0V//50Hz Internal thermal protection Class of poles Rotation speed (at high speed) rpm Max. power consumption Max. current consumption A Fan Type Diameter Length Air filter Polypropylene, class HB (UL 9) Washable Condensate pump Power supply 0V//50Hz Nominal flow rate litres/hour Lift height above the unit Power consumption Fresh air intake (knock-out) Connection diameter Wire remote control version Infrared remote control version. - MODEL WITH ELECTRIC HEATING RESISTANCE ( pipes + electric heating) Supplementary electric resistance Shielded type, built into the exchanger Power Current consumption Safety thermostats Automatic reset Cut off 75 C Manual reset Cut off 95 C Wire remote control version.3 - MODEL WITH ADDITIONAL HOT WATER COIL ( pipes) of exchanger tubes used for the additional coil Connections Manual air bleeder Wire remote control version 5 A CWX 3 Galvanised steel 3 exterior Polystyrene RAL 900 IP /" gas female F Centrifugal CWX 3 BE,5 5, CWX 3 BW /" gas female CWX 5 Galvanised steel 3 exterior Polystyrene RAL 900 IP /" gas female F Centrifugal CWX 5 BE,50 0,8 CWX 5 BW /" gas female

5 - ACCESSORIES 5. - 3-WAY VALVE + BY-PASS Code 70600088. This valve kit can be mounted on all models and is obligatory for cold water use.

6 5 - ACCESSORIES WAY VALVE + BY-PASS Code This valve kit can be mounted on all models and is obligatory for cold water use. If this valve is not installed there is a risk of the condensate tray overflowing when the machine is switched off by the thermostat or if the condensate pump breaks down. An auxiliary condensate tray (for the valve) is delivered as standard with the units. For the -pipe versions, kits are required. Characteristics: - Connection: /" male gas (the valve is supplied with the connections for installation directly on the unit s outlet). - Kvs:.6. - "On/Off" 30V thermal actuator. - Open time: 3 min REMOTE CONTROLS (for the wire remote control version) Manual remote control Control on valve (s) Control on cooling valve + electrical resistance RCC 0 automatic remote control for -pipe units RCC 0 automatic remote control for -pipe units + electrical resistance or -pipe Change/over sensor or air recirculation with bracket for RCC Air temperature sensor in box for RCC CWX 3 B CWX 3 BE CWX 3 BW CWX 5 B CWX 5 BE CWX 5 BW Note: "On-Off" action on valve, 30 VAC (accessory). A - MANUAL REMOTE CONTROL Code The operating mode is selected manually by a switch on the front of the control unit. Technology : electromechanic. Power supply : 30 Vac Set-point adjustment range: 8 / 30 C (possibility of mechanical limitation by jumpers on the knob) "On-Off" action Control differential : K Operating temperature : 0 / 50 C Relative humidity : < 95% Protection class : cl. II IP :30 Colour : White RAL 9003 Operating switch with fan speed selection Temperature setting knob Heating / cooling selector switch 6

B - AUTOMATIC REMOTE CONTROLS Type RCC 0 - code 705005 and type RCC 0 - code 705005 Selection of the operating mode is done automatically.

7 B - AUTOMATIC REMOTE CONTROLS Type RCC 0 - code and type RCC 0 - code Selection of the operating mode is done automatically. For the -pipe units capable of heating and cooling operation, a change-over sensor must be connected (accessory, code ) to the installation on the water piping. This change-over sensor can be replaced by a potential-free contact (not supplied), the closing of which causes changeover to cooling mode. There is a possibility to connect a remote air temperature sensor, bare (accessory, code ) or box mounted (accessory, code ). Permanent or slaved ventilation. Mode change is possible (Eco or Stand-by) by an external potential-free contact (not supplied). Technology : electronic. Power supply : 30 Vac Set-point adjustment range: 8 / 30 C (possibility of mechanical limitation by jumpers on the knob) "On-Off" action Heating differential : adjustable or K Cooling differential : adjustable 0.5 or K Neutral zone (on RCC 0) : adjustable or 5 K Setpoint in "Eco" mode : 6 C in heating mode 8 C in cooling mode Setpoint in "Standby" : 8 C in heating mode Operating temperature : 0 / 50 C Relative humidity : < 95% Protection class : cl. II IP :30 Colour : White RAL 9003 Heating on indicator light Ventilation on indicator light Cooling on indicator light Temperature setting knob Operating switch with fan speed selection C - TEMPERATURE PROBE (BARE) - code For RCC type remote control. possible uses: - change over probe (equipped with a tube retaining clip) for "-tube" appliances may operate in heating and cooling mode, - air temperature probe (to be placed on the air intake). Thermistance type CTN 3 kω at 5 C. IP 65 - protection class: cl. II. D - BOX-MOUNTED AIR TEMPERATURE PROBE - code For RCC remote controls. Enables the control unit to be placed outside the room to be air conditioned. Thermistance type CTN 3 kω at 5 C. The unit is mounted in a box similar to the remote control (IP 30 - protection class: cl. II - colour: white RAL 9003). Due to our policy of continuous development, our products are liable to modification whitout notice. 7 R.D. 8 Reyrieux BP Trévoux CEDEX France Phone Fax R.C.S. Bourg-en-Bresse B

CWX 6 - CWX 8 - CWX 10 CASSETTE TYPE TERMINAL UNIT

TECHNICAL INSTRUCTIONS CWX 6 - CWX 8 - CWX 10 CASSETTE TYPE TERMINAL UNIT Cooling Heating CWX 6 2 pipes 6.00 kw 7.70 kw CWX 8 2 pipes 8.00 kw 10.50 kw CWX 10 2 pipes 9.92 kw 13.00 kw November 2008 10 12