UNITES TERMINALES ET MINI CTA FIDJI

Transcription

1 1 UNITES TERMINALES ET MINI CTA FIDJI

2 2 Air Handling Unit Fidji Presentation High Effi ciency superposed Heat Recovery Unit, with control factory mounted, for indoor or outdoor installation. Solution adapted to achieve the highest energy certifi cations in commercial, industrial and tertiary buildings. Filtration and preheat of fresh air. Delivered fully pre-wired and factory tested Range: 8 sections from 5 m 3 /h up to 27 m 3 /h. Supplied in one-piece (1, 2, 3 or 4 sections following size and confi guration) up to a length of 3m. Possibility to disconnect the section on job site (as optional "with wiring connectors"). Available with high energy effi ciency thermal wheel or counter-fl ow plate, Eurovent certifi ed. Fidji Air Handling Unit ErP compliant. Main module Aluminium structure with thermal break. Double skin panels RAL739 pre-coated steel exterior and galvanized steel interior Insulation 5 mm mineral wool 35kg/m 3. Pre-fi ltration G4 and M5 on sliding rails. Filtration F7 and F9 on compression sliding rails. Plug fan with EC motor, high duct static pressure option available. Thermal wheel exchanger in aluminium with variable rotation speed. Counter-fl ow plate heat exchanger in aluminium with partial by-pass for lowest pressure dropt and highest heat recovery. By-pass's actuator integrated. Condensate drain pan on plate heat exchanger in standard on Extract Air side. Heating / cooling coils with copper tube and aluminium fi ns. Dampers and fl exible fl anges available as optional on all 4 fl ows. Fully connected and factory tested. User-friendly control program and easily confi gurable. Additional modules F7 or F9 additional bag fi lters. Cooling and/or Heating additional coils. Electrical coils (with separate electrical alimentation if supplied in additional module). 3-ways mixing box Technical data sheet available on website

3 Self-regulating Heat Recovery Unit FIDJI Plug-fan 2 - Very high efficiency Heat Recovery Systems 3 - G4 to F7 filters class 4 - Control included 5 - Electric or water coil 6 - Large hinged doors, easily maintenance 7 - Cables gland for electrical connection 8 - Feet - Handling by forklift High Efficiency Heat Recovery Systems from 72% to 91% 1 Aluminium Rotary heat recovery (epoxy as optional) EUROVENT AARE C certified 6 Aluminium rotor with variable rotation speed driven by a belt. A purge sector is provided to allow the continuous cleaning of the rotor. In standard, two effi ciencies are available on all sizes to fulfi l customer s constraints and requirements UNITES TERMINALES ET MINI CTA Aluminium counter-flow plate heat exchanger EUROVENT AAHE P certified Plate heat exchanger, counter-fl ow type, up to 45 m 3 /h, effi ciencies from 87% to 91% according the operating point. By-pass in standard to allow free cooling operation and to ensure the plate heat exchan- ger defrosting in winter. Plugfan with very high efficiency EC motor Plug fan associated to Electrical Commutation Motor type (EC motors) with two size of motor per unit sizes EC BP for Total static pressure < 8 Pa EC HP for Total static pressure > 8 Pa Fan Motor Assembly ErP 215 compliant Configurable motor Control factory integrated and tested at the end of the production line. Communicant control based on ModBus RTU RS485 or TCP/IP, Bacnet IP or LonWorks protocols. Constant Air Volume (CAV) operation or Variable Air Volume (VAV) operation (according constant duct pressure setpoint, or, CO 2 sensor, or, air quality sensor, or, ). All informations availables: Airfl ow and air pressure, exchangers, registres sur informations multiples de Temperature, pression, CO 2, marche/arrêt à distance, etc.

4 4 Air Handling Unit Fidji / Pressure range with EC fans 2 High pressure EC fan (EC HP) Standard pressure EC fan (EC BP) FIDJI 15 FIDJI 3 FIDJI 45 FIDJI 65 FIDJI 1 FIDJI FIDJI 2 FIDJI Technicals characteristics Materials Structure Insulation Fire classification Heat Recovery Systems (HRS) EUROVENT Certifi ed RAL RAL 739 Alimentation 4V / 3~+N / 5 Hz Main Module RAL 739 1/1 ème pre-coated metal sheet in outer skin and galvanised steel in inner skin Double Skin 5mm mineral wool A2-s1-d Aluminium thermal wheel ~82% effi cient according EN38 H1 according EN1353 or Counter-fl ow plate ~88% effi cient according EN38 H1 according EN1353 Type Motorisation Management Plug-fan Electronic Commutation motors (EC) by internal Modbus Fan Motor Assembly of Main Module Water coils Materials Copper tubes / aluminium fi ns Rows 2 or 4 rows available in the main module ; 2 and/or 4 and/or 6 rows available in additional module ; Heating or Cooling coils Min.- Max. temperature 2 C 1 C Max. service pressure 1 bars Drain pan Insulated and non-removable Main module G4 or M5 pre-fi ltration (as optional) Main module F7 fi ne fi lter conform with EN 779:212 Filters Mixing module Electrical coil module Water coil module Filter module 3-ways On supply air or on fresh air side (preheating) Heating or Cooling coils with 2-ways or 3-ways valves F9 fi ne fi lter Additional Modules

5 Air Handling Unit Fidji 5 Main module construction Succinct codification principle J 5 I D 4 C A P 1 Supply side Extraction side Sans batterie 1 2-pipes system: Heating water coil alone 2 Rows 2 2-pipes system: Heating water coil alone 4 Rows 3 2-pipes system: Cooling water coil alone 2 Rows 4 2-pipes system: Cooling water coil alone 4 Rows 5 4-pipes system: 2R Heat. coil integrated + 4R Cool. coil in add. module 6 4-pipes system: 2R Heat. coil integrated + 6R Cool. coil in add. module 7 6-pipes system: 2R Heat. coil integrated + 6R Cool. & 4R Heat. coil in add. module 8 2P/2F system: Electric heater integrated + 4R Cool. coil in add. module UNITES TERMINALES ET MINI CTA Without control C Constant Air Volume (C.A.V.) Q Variable Air Volume (V.A.V.) according air quality setpoint. P Variable Air Volume (V.A.V.) according supply duct pressure setpoint No fi lters A Flat G4 B Flat M5 C Flat G4 + short bag F7 D Flat G4 + short bag F9 E Flat M5 + short bag F7 F Flat M5 + short bag F9 1 Thermal wheel heat exchanger 2 Thermal wheel heat exchanger + 3-ways mixing function 3 Counter-fl ow plate heat exchanger 4 Counter-fl ow plate heat exchanger + 3-ways mixing function D Right hand service side G Left hand service side I Indoor installation R Outdoor installation J FIDJI

6 6 Air Handling Unit Fidji An efficient control Operting mode (1) (to define on order) Descriptif Remarque Base Option VAV_Variable Airfl ow Volume CAV_Constant Airfl ow Volume Lockable electric isolator Proximity switch 1/4-turn lockable (sensor) Real Time Clock Weekly programming working days, non-working days, reduced operating Setpoint shift on temperature / airfl ow Language French / English Communication protocols Modbus RTU RS485 Modbus TCP/IP ; BACnet IP ; LonWorks Alarm Log Saving of 1 last defaults (with date and hours) Analog sensors Temperature sensors Fresh Air / Supply Air / Return Air / Extract Air Differential pressure transmitter on Supply & Extract plugfans Duct pressure sensor on supply air Air Quality sensor (on return air or in ambient air) Digital inputs On/Off remote contact Presence detector Heating / Cooling Modulating actuators on valves (Additional Coil's module as optional ) Modulating actuators on valves Command of electrical coil with 1, 2 or 3 steps (by relay) with post-ventilation integrated in the control operating logic Heat Recovery System (HRS) Variable rotation speed on thermal wheel Free-Cooling / Free-Heating Antifreeze protection (Reduction / Stop of thermal wheel) following temperature measured by temperatures probes By-pass management Fan (choice fixed on order) Constant Airfl ow on Supply and Extract fans (different instructions possible) On/Off fan's management possible according temperature Variable Airfl ow on Supply and Extract fans (according Air Quality sensor, Constant pressure setpoint on duct, etc...) Control of Air Quality on Return Air (Airfl ow variation on supply and extraction fans) Safety Thermal protection on extraction and supply fans Thermal protection on thermal wheel's motor Belt breakage detector on thermal wheel Filter clogging pressostats on each fi lter stage Antifreeze protection by temperatures probes Safety thermostats on Electrical Coil(s) (if Electric Coil selected) Smoke detector (CTA < 1 m3/h) Smoke detector (CTA > 1 m3/h) - not mounted ; not wired (1) Taking into account the temperature and altitude in the volume airfl ow calculation for an accuracy benefi ts up to 1%.

7 Air Handling Unit Fidji 7 AIRCALO's control is a friendly system to manage the Heat Recovery Air Handling Units. It aims to take on the main control functions, command and to manage all organs equipping the AHU, whether standard or optional. Each functions of AHU is the subject of a program tested and downloaded in the factory. Confi gurations and comfort settings must be completed on jobsite by installer and/or customer. AIRCALO's control monitors the information provided by the various sensors and probes required for the regulation of the AHU. It continuously analyses all incoming information and in accordance with pre-loaded algorithms, interacting on all AHU's components (fans, valves, dampers,...). Air quality CO 2 Outdoor T( C) Outdoor Air Temperature Extract Air Temperature P on pre-fi lter G4 P on fi ne fi lter F7 Extract airfl ow P on Extract air fan Supply airlfow P on supply air fan P on pre-fi lter G4 Return Air Temperature Supply Air Temperature Static duct pressure on supply UNITES TERMINALES ET MINI CTA Exhaust Air Return Air Outdoor Air Supply Air The possible management mode are: - STOP: switched off. - COMFORT: forced march on day setpoints. - REDUCED: forced march on night setpoints - FROST: forced heating setpoint to 8 C - AUTO : automatic operation according to programs set on the clock. As standard, the AIRCALO's control integrates 4 time zones per day and 7 weekly days programming. Several automatic alarms can manage potential malfunction and organize the maintenance and servicing of the unit.

8 8 Air Handling Unit Fidji EC Plugfan characteristics EC «BP» Fidji 15 Fidji 3 Fidji 45 Fidji 65 Fidji 1 Fidji Fidji 2 Fidji 265 Wheel diameter x5 2x56 EC references (K3G-...) 25-AV29 -AU11 31-BB49 4-AQ23 5-AP24 56-AQ4 2x5-AP24 2x56-AQ4 Alimentation 23V-1-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz Plugfan quantity Power per plugfan (kw) (3.54x2) 9.2 (4.6x2) Maxi. rotation speed (tr/mn) EC «HP» Fidji 15 Fidji 3 Fidji 45 Fidji 65 Fidji 1 Fidji Fidji 2 Fidji 265 Wheel diameter x45 2x45 3x45 EC references (K3G-...) -AU11 31-BB49 4-AQ23 45-AZ3 45-AZ3 2x45-AZ3 2x45-AZ3 3x45-AZ3 Alimentation 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz 4V-3-5Hz Plugfan quantity Power per plugfan (kw) (5.25x2) 1.5 (5.25x2) (5.25x3) Maxi. rotation speed (tr/mn) The operating point management is realized by a modbus command. The nominal power of Air Handling Unit is based on the desired operating point. It is the sum of the power of each fan(s) selected on supply and extract side. EC motors are provided with internal thermal protection. Electrical coils Coil alimentation: 4 V - 3ph. - 5 Hz (1~ 23V available as optional on Fidji 15 with EC «BP» plugfans on supply and extract air). Models Fidji 15 Fidji 3 Fidji 45 Fidji 65 Fidji 1 Fidji Fidji 2 Fidji 265 Minimum airflows (m 3 /h) Maximum capacity (kw) 2,25 3, 4,5 12, 15, 18, 21, 36, Type Type Type Steps Capacity / steps (kw) , ,5+7, ,5+1, Maximum capacity (kw) 4,5 9, 13,5 18, 3, 45, 63, 72, Steps Capacity / steps (kw) 2,25+2, , ,5+7, , , Maximum capacity (kw) 6,75 12, 18, 3, 45, 63, 84, 18, Steps Capacity / steps (kw) 2,25+4, ,5+4, , , ,5+31, Capacity per element (kw),8 1, 1,5 2, 2,5 3, 3,5 4, When the unit is supplied with Electrical Heater, manual and automatic safety thermostat are supplied in standard. The manual safety thermostat is set to trigger at 15 C. The electrical coil in additional module must have its own alimentation (different from the main alimentation of the AHU). CAUTION: if the control of electrical coil is not realized by AIRCALO, provide a timeout forced fan operation after stopping the electrical coil to ensure its refresh: - for capacity < 9 kw 4 minutes time delay minimum - for capacity 9 kw 5 minutes time delay minimum

9 Air Handling Unit Fidji 9 Performances and main characteristics Range FIDJI 15 FIDJI 3 FIDJI 45 FIDJI 65 FIDJI 1 FIDJI FIDJI 2 FIDJI 265 Minimum airflow (wheel 1.5mm: efficiency > 84%) m 3 /h Nominal airflow (wheel 1.5mm: efficiency > 82%) m 3 /h Maximal airflow (wheel 1.5mm: efficiency > 8%) m 3 /h Models FIDJI 15 FIDJI 3 FIDJI 45 FIDJI 65 FIDJI 1 FIDJI FIDJI 2 FIDJI 265 Counter-flow Plate Heat Exchanger (Efficiency ~88%) Global SFPv (3) W/m 3.s Main module length (without 3-ways section) mm Main module weight (+/- 1%) kg Thermal Wheel Heat Exchanger 1.5mm (Efficiency ~82%) Global SFPv (3) W/m 3.s Main module length (without 3-ways section) mm Main module weight (+/- 1%) kg Thermal Wheel Heat Exchanger 2.mm (Efficiency ~72%) Global SFPv (3) W/m 3.s Main module length (without 3-ways section) mm Main module weight (+/- 1%) kg UNITES TERMINALES ET MINI CTA Filters FIDJI 15 FIDJI 3 FIDJI 45 FIDJI 65 FIDJI 1 FIDJI FIDJI 2 FIDJI 265 Filter frame air leakage EN 1886 F9 in negative pressure / F8 in positive pressure Filters available in main module EN 779 Flat G4 or M5 pre-fi lters and/or fi ne F7 or F9 bag fi lters Filters available in additional modules EN 779 F7 or F9 bag fi lters Heating mode Cooling mode Water coils (1) FIDJI 15 FIDJI 3 FIDJI 45 FIDJI 65 FIDJI 1 FIDJI 1 FIDJI 2 FIDJI 265 Available rows - 2 or 4 rows 2 Rows - Total capacity (2) kw 6,2 11,2 17,8 24,9 4,6 6,6,6 12,2 4 Rows - Total capacity (2) kw 1,8 2, 31,1 46,5 7,6 15,3 136, 181,9 Available rows - 4 or 6 rows 4 Rows - Total capacity (2) kw 6,4 11,8 18,4 27,8 41,9 62,9 79,6 17,1 4 Rows - Sensible capacity (2) kw 4,3 7,9 12,3 18,2 27,9 41,4 53,9 71,7 6 Rows - Total capacity (2) kw 8,2 15,4 24,1 35,4 55,1 8,6 12,3 137,9 6 Rows - Sensible capacity (2) kw 5,4 1, 15,7 23, 35,8 52,2 68,1 9,6 (1) Only one coils can be inserted in the main module. Water coil 2 or 4 rows, or, Electrical coil (if I absorbed of main module <1A). Coil 6 rows only in additional module. (2) Conditions: Winter: Air inlet Temperature = outlet heat exchanger temperature ; heat water 6/4 C ; nominal airfl ow Summer: Air inlet Temperature = outlet heat exchanger temperature ; chilled water 7/12 C ; nominal airfl ow (3) Confi guration: OA: M5/F7 - RA: M5 - Fans EC BP - 25 Pa available return / supply - nominal airfl ow

10 1 Air Handling Unit Fidji Double flux configurations Thermal Wheel Heat Exchanger version Efficiency from 72% up to 87% Counter-flow Plate Heat Exchanger version Efficiency from 87% up to 91% 8 sizes from 5 up to 27' m 3 /h (composed with 1 to 4 modules according the sizes) 3 sizes from 5 up to 4'5 m 3 /h (composed with 1 to 4 modules according the sizes) Fresh Air Heat Recovery Unit (Without coil) Fresh Air Heat Recovery Unit (Without coil) Heat Recovery Air Handling Unit with Water coil integrated Heat Recovery Air Handling Unit with Water coil integrated Heat Recovery Air Handling Unit with 3-ways mixing section without coil Heat Recovery Air Handling Unit with 3-ways mixing section without coil Heat Recovery Air Handling Unit with 3-ways mixing section and Water coil integrated Heat Recovery Air Handling Unit with 3-ways mixing section and Water coil integrated

11 Additional modules JR A JR B JR D Air Handling Unit Fidji Empty casing Filter casing (side access only) Electrical coil module Bag fi lters F7, F9 11 from 2.25 to 18 kw following the unit size up to 1, 2 or 3 steps UNITES TERMINALES ET MINI CTA JR E Water coil module Additional coils 2-rows and/or 4-rows and/or 6 (2 coils max. in the same module). With drain pan and droplet eliminator for the cooling coil for high air velocity and/or high air humidity. Accessories JR K Rain hood REG + SRV Total damper + Actuators On/Off - 23 V with spring return (up to 4 dampers per unit) MAN Flexible fl ange to install on AHU or on damper (supplied loose to assemble on jobsite) JR M Circular plenum connectors (Fidji 15: 1x Ø 315 ; Fidji 3: 1x Ø 4 ; Fidji 65: 1x Ø 5) A B JR N A: Roof kit for main module B: Roof kit for each additional module

12 12 Air Handling Unit Fidji 15 Dimensions - Plate Heat Exchanger version M 15/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 1mm mini. Dimensions - Plate Heat Exchanger version + 3-ways M 15/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 1mm mini. Dimensions - Additional module M 15/21 (1/2") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

13 Air Handling Unit Fidji Dimensions - Thermal Wheel version M 15/21 Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 1mm mini. UNITES TERMINALES ET MINI CTA Dimensions - Thermal Wheel version + 3-ways M 15/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 1mm mini. Dimensions - Additional module M 15/21 (1/2") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

14 14 Air Handling Unit Fidji 3 Dimensions - Plate Heat Exchanger version M 2/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 12mm mini. Dimensions - Plate Heat Exchanger version + 3-ways M 2/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 12mm mini. Dimensions - Additional module M 2/27 (3/4") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil Global tolerance ( ) -1 Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

15 Air Handling Unit Fidji 3 15 Dimensions - Thermal Wheel version M 2/27 Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 12mm mini. UNITES TERMINALES ET MINI CTA Dimensions - Thermal Wheel version + 3-ways M 2/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 12mm mini. Dimensions - Additional module M 2/27 (3/4") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil Global tolerance ( ) -1 Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

16 16 Air Handling Unit Fidji 45 Dimensions - Plate Heat Exchanger version M 26/ Condensate 37 Ø Main module delivered in one-piece. Side handling. Forklift forks 14mm mini. Dimensions - Plate Heat Exchanger version + 3-ways M 26/ Condensate Ø Main module delivered in 2-pieces. Handling by the front. Forklift forks 14mm mini. Dimensions - Additional module M 26/34 (1") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

17 Air Handling Unit Fidji Dimensions - Thermal Wheel version M 26/ Cond. Ø Main module delivered in one-piece. Side handling. Forklift forks 14mm mini. Dimensions - Thermal Wheel version + 3-ways UNITES TERMINALES ET MINI CTA M 26/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 14mm mini. Dimensions - Additional module M 26/34 (1") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil Global tolerance ( ) -1 Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

18 18 Air Handling Unit Fidji 65 Dimensions - Thermal Wheel version M 26/ Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 16mm mini. Dimensions - Thermal Wheel version + 3-ways M 26/ Dimensions - Additional module Condensate Ø Main module delivered in one-piece. Side handling. Forklift forks 16mm mini M 26/34 (1") Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil Global tolerance ( ) -1 Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

19 Air Handling Unit Fidji 1 19 Dimensions - Thermal Wheel version M 4/49 Cond. Ø Main module delivered in 2-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Thermal Wheel version + 3-ways UNITES TERMINALES ET MINI CTA M 4/ Cond. Ø Main module delivered in 3-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Additional module M 4/49 (1"1/2) Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Condensate Ø 22 Coils 4R(-) + 2R(+) Coils 2R(+) + 4R(-)

20 2 Air Handling Unit Fidji Dimensions - Thermal Wheel version M 4/ Cond. Ø Main module delivered in 2-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Thermal Wheel version + 3-ways M 4/ Cond. Ø Main module delivered in 3-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Additional module M 4/49 (1"1/2) Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

21 Air Handling Unit Fidji 2 21 Dimensions - Thermal Wheel version M 66/76 Cond. Ø Main module delivered in 2-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Thermal Wheel version + 3-ways UNITES TERMINALES ET MINI CTA M 66/ Cond. Ø Main module delivered in 3-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Additional module M 66/76 (2"1/2) Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Condensate Ø 22 Coils 4R(-) + 2R(+) Coils 2R(+) + 4R(-)

22 22 Air Handling Unit Fidji 265 Dimensions - Thermal Wheel version M 66/ Cond. Ø Main module delivered in 2-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Thermal Wheel version + 3-ways M 66/ Cond. Ø Main module delivered in 3-pieces. Handling by the front. Forklift forks 16mm mini. Dimensions - Additional module M 66/76 (2"1/2) Casings: - Empty - Filter(s) - Water coil(s) - Electrical coil +1 Global tolerance ( ) Coils 4R(-) + 2R(+) Condensate Ø 22 Coils 2R(+) + 4R(-)

23 Air Handling Unit Fidji 23 Handling Fidji Air Handling Unit are delivered under a plastic fi lm protection (not weatherproof - storage under shelter mandatory) with transport feet (no pallet). The unloading and the handling could be done by using a forklift able to carrying the load (weight shown on the delivery note) and provided with suffi cient long forks to cross the entire width of the unit: Sizes Mini. forks length (mm) Fidji 15 1 Fidji 3 12 Fidji Fidji Fidji 1 16* Fidji 16* Fidji 2 16* Fidji * * Main unit delivered in x modules. Handling by the front. UNITES TERMINALES ET MINI CTA Handling operation must be done by crane with slings and spreader. Maintenance spacing Provide a clear space for maintenance (replacement of components) around the unit according to the table below : 6 Sizes L L doors Fidji Fidji Fidji Fidji Fidji Fidji Fidji Fidji L L doors

24 24 Air Handling Unit Fidji 15 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 9,4 34,1,12-1,7 31,4,13-12, 29,1,15-13,2 27,1,16-14,3 25,5,17-15,3 25,,19-16,2 22,8,2 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 8,9 31,9,22-5,3 16,1,25-1,4 3,2,25-6,1 16,9,29-11,9,7,29-6,9 17,6,33-13,2 27,3,32-7,7 18,2,37-14,5 26,1,35-8,4 18,8,4-15,8 25,,38-9, 19,3,43-16,9 24,,41-9,6 19,7,46 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15.5 / 5.8 3,8 31,9, / 5.6 4,4 3,8, / 5.5 4,9 29,8, / 5.8 5,4,8, / ,,, / ,5 27,1, / ,9 26,4,8 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15.5 / 5.8 4,6 35,3, / 53. 3,8 14,8, / 5.6 5,4 34,3, / ,4 15,4, / 5.5 6,1 33,5, / , 16,, / 5.8 6,9 32,7, / ,6 16,5, / ,7 31,9, / ,1 16,9, / ,5 31,2, / ,7 17,4, / ,2 3,6, / ,2 17,7, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 14.3 / 5.6 4, 31,4, / 51. 4,6 3,1, / ,2,8, / ,8 27,7, / ,4 26,7, / 51. 7, 25,8, / 5.8 7,5 25,,9 COUNTER-FLOW PLATE 6/4 C O.A. - 7 /9% - R.A. 19 /5% 16.4 / ,7 32,4, / ,2 31,2, / ,7 3,3,6 16. / ,2 29,5, / 18. 5,6,8, / ,1,1, / ,5 27,6,8 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 14.3 / 5.6 4,8 35,1, / , 15,, / 51. 5,7 34,1, / 53. 4,6 15,6, / ,7 33,1, / ,3 16,3, / ,6 32,1, / ,9 16,8, 12.1 / ,5 31,3, / ,4 17,2, / 51. 9,3 3,5, / , 17,7, / 5.8 1,1 29,8, / ,5 18,,36 COUNTER-FLOW PLATE 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 16.4 / ,4 35,4, / , 15,2, / ,1 34,5, / ,6 15,8, / ,9 33,7, / ,2 16,3, / ,5 33,, / ,8 16,8, 15.9 / 18. 7,2 32,3, / ,3 17,1, / ,8 31,7, / ,8 17,5, / ,4 31,2, / ,2 17,8,34

25 Air Handling Unit Fidji Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Fan ø 25 3V Max. airflow recommended (efficiency 8% on wheel) 4V Fan ø 3V 5V Counter-fl ow plate Wheel 1,5 mm Wheel 2, mm 6V 5V 7V 8V 9V V 6V 7V 8V 9V F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) Wheel 1,5 mm Counter-fl ow plate Wheel 2, mm UNITES TERMINALES ET MINI CTA (m 3 /h)

26 26 Air Handling Unit Fidji 3 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 17,56 38,8,21-21,16 34,9,26-24,29 32,,3-27,22 29,6,33-29,84 27,6,36-32,35 25,9,39-34,64 24,5,42 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 16,2 34,7,39-9,9 14,5,47-2, 32,6,48-12,14 15,6,58-23,56 3,8,57-14,11 16,5,67-26,97 29,3,65-15,97 17,3,76-3,8 27,9,73-17,65 17,9,84-33,9 26,7,8-19,27 18,5,92-35,86 25,6,87-2,75 19,,99 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15,6 / 5,8 7,9 33,9,9 15,3 / 5,7 8,64 32,3,1 15,1 / 5,5 9,98 31,,12 14,6 / 5,9 11,37 29,8,14 14,2 / 51,4 12,63,8,15 13,8 / 51,7 13,87 27,8,17 13,4 / 52, 15,4 27,,18 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15,6 / 5,8 8,29 37,,2 25,9 / 53, 7,16 13,6,34 15,3 / 5,7 1,43 35,8,25 26, / 53,1 8,85 14,5,42 15,1 / 5,5 12,36 34,8,3 26,1 / 53,2 1,38 15,2,5 14,6 / 5,9 14,4 33,8,35 26,2 / 53,3 11,86 15,8,57 14,2 / 51,4 16,29 33,,39 26,3 / 53,3 13,2 16,3,63 13,8 / 51,7 16,56 32,9,4 26,4 / 53,2 14,51 16,8,69 13,4 / 52, 2, 31,5,48 26,5 / 53,2 15,74 17,2, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15,2 / 49,9 7,18 33,8,9 14,5 / 5,5 8,87 32,,11 13,9 / 5,9 1,39 3,5,13 13,3 / 51,2 11,86 29,2,14 12,8 / 51,4 13,21,1,16 12,2 / 51,4 14,59 27,,18 11,8 / 51,4 15,8 26,1,19 COUNTER-FLOW PLATE 6/4 C O.A. - 7 /9% - R.A. 19 /5% 16,6 / 17,2 6,8 34,3,8 16,3 / 17,5 8,3 32,7,1 16,1 / 17,8 9,6 31,5,12 15,9 / 18, 1,83 3,5,13 15,7 / 18,2 11,96 29,6,14 15,5 / 18,4 13,5,8,16 15,4 / 18,5 14,2,1,17 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15,2 / 49,9 8,43 37,,2 26, / 53,4 7,27 13,7,35 14,5 / 5,5 1, 35,7,26 26,2 / 53,3 9,5 14,6,43 13,9 / 5,9 12,98 34,6,31 26,4 / 53,2 1,68 15,3,51 13,3 / 51,2 15,17 33,6,37 26,5 / 53, 12,15 15,9,58 12,8 / 51,4 17,22 32,7,42 26,7 / 52,8 14,87 17,1,71 12,2 / 51,4 17,61 32,5,42 26,8 / 52,6 14,94 17,,71 11,8 / 51,4 21,25 31,,51 26,9 / 52,4 16,17 17,4,77 COUNTER-FLOW PLATE 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 16,6 / 17,2 7,89 37,1,19 25,9 / 56,9 7,52 13,9,36 16,3 / 17,5 9,94 36,,24 26, / 56,5 9,27 14,8,44 16,1 / 17,8 11, 35,, 26,1 / 56,2 1,79 15,5,51 15,9 / 18, 13,56 34,1,33 26,2 / 55,9 12,25 16,1,58 15,7 / 18,2 15,22 33,4,37 26,3 / 56,8 13,77 16,7,66 15,5 / 18,4 15,36 33,3,37 26,3 / 55,5 14,77 17,,7 15,4 / 18,5 18,33 32,,44 26,4 / 55,4 16, 17,4,76

27 Air Handling Unit Fidji 3 27 Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Max. airflow recommended (efficiency 8% on wheel) Fan ø 6V 5V 4V 3V Fan ø 31 7V 4V 3V 5V Counter-fl ow plate Wheel 1,5 mm Wheel 2, mm 8V F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) Wheel 1,5 mm Counter-fl ow plate Wheel 2, mm 9V V 7V 9V 8V UNITES TERMINALES ET MINI CTA (m 3 /h)

28 Air Handling Unit Fidji 45 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 3,39 37,5,37-35,53 34,2,43-4,1 31,7,49-44,38 29,5,54-48,35 27,7,59-51,99 26,2,63-55,49 24,8,68 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 27,93 33,9,67-17,7 15,,81-33,62 32,,81-2,24 16,,96-38,81 3,4,94-23,9 16,7 1,1-43,76 29, 1,6-25, 17,4 1,23-48,43 27,8 1,17 -,29 18, 1,35-52,77 26,6 1,27-3,61 18,5 1,46-56,97 25,6 1,37-32,84 19, 1,57 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15,5 / 5,7 12,4 33,5,15 15,2 / 5,6 14,65 32,1,18 14,9 / 5,7 16,7 3,9,2 14,5 / 51,1 18,72 29,8,23 14,1 / 51,5 2,66,8,25 13,7 / 51,8 22,49,,27 13,4 / 52,1 24,23 27,2,29 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15,5 / 5,7 14,44 36,5,35 26, / 53,1 12,42 14,,59 15,2 / 5,6 17,55 35,4,42 26, / 53,2 14,72 14,7,7 14,9 / 5,7 2,45 34,5,49 26,1 / 53,2 16,93 15,3,81 14,5 / 51,1 23,4 33,6,56 26,2 / 53,3 19,8 15,9,91 14,1 / 51,5 26,27 32,8,63 26,3 / 53,3 21,1 16,4 1,1 13,7 / 51,8 29,4 32,1,7 26,4 / 53,2 22,99 16,8 1,1 13,4 / 52,1 31,69 31,4,76 26,5 / 53,2 24,87 17,2 1, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 14,9 / 5,2 12,65 33,3,15 14,2 / 5,7 15,14 31,7,18 13,7 / 51, 17,36 3,4,21 13,1 / 51,3 19,58 29,1,24 12,6 / 51,4 21,65,1,26 12,1 / 51,4 23,64 27,1,29 11,7 / 51,5 25,53 26,2,31 COUNTER-FLOW PLATE 6/4 C O.A. - 7 /9% - R.A. 19 /5% 16,5 / 17,3 11,92 33,9,14 16,3 / 17,5 14,4 32,6,17 16,2 / 17,7 15,9 31,5,19 16, / 17,8 17,72 3,6,21 15,9 / 18, 19,37 29,8,23 15,8 / 18,1 2,89 29,1,25 15,8 / 18,1 22,29,6,27 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 14,9 / 5,2 14,81 36,4,36 26,1 / 53,4 12,6 14,1,6 14,2 / 5,7 18, 35,3,44 26,3 / 53,3 15,18 14,9,72 13,7 / 51, 21,48 34,3,52 26,4 / 53,1 17,4 15,5,83 13,1 / 51,3 24,74 33,4,6 26,6 / 52,9 19,71 16,1,94 12,6 / 51,4 27,87 32,5,67 26,7 / 52,7 21,74 16,6 1,4 12,1 / 51,4 3,9 31,7,75 26,8 / 52,5 23,65 17, 1,13 11,7 / 51,5 33,82 31,,82 27, / 52,3 25,75 17,4 1,23 COUNTER-FLOW PLATE 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 16,5 / 17,3 13,75 36,6,33 25,9 / 56,8 12,95 14,3,62 16,3 / 17,5 16,64 35,6,4 26, / 56,5 15,39 15,,73 16,2 / 17,7 19,24 34,7,46 26,1 / 56,2 17,6 15,6,84 16, / 17,8 21,83 34,,53 26,2 / 56,1 19,76 16,2,94 15,9 / 18, 24,22 33,3,58 26,2 / 55,9 21,58 16,6 1,3 15,8 / 18,1 26,46 32,7,64 26,2 / 55,8 23,27 17, 1,11 15,8 / 18,1,52 32,1,69 26,3 / 55,7 25,13 17,4 1,2

29 Air Handling Unit Fidji Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Max. airflow recommended (efficiency 8% on wheel) Fan ø 31 4V 3V 3V 5V Fan ø 4 4V 6V 5V 7V Counter-fl ow plate Wheel 1,5 mm Wheel 2, mm 6V Wheel 1,5 mm Counter-fl ow plate Wheel 2, mm F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) 8V 9V V 8V 9V UNITES TERMINALES ET MINI CTA (m 3 /h)

30 3 Air Handling Unit Fidji 65 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 45,98 36,2,56-52,38 33,5,64-58,25 31,3,71-63, 29,4, - 68,88 27,7,84-73,67 26,3,9 -,22 25,1,95 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 43,41 33,8 1,5 -,86 15, 1, - 5,72 32,2 1,22-3,97 15,8 1,48-57,57 3,8 1,39-34, 16,5 1,66-64,13 29,6 1,55-38,4 17,1 1,83-7,27,5 1,7-41,75 17,7 1,99-76,12 27,7 1,84-44,92 18,2 2,14-81,7 26,5 1,97-47,94 18,6 2,29 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15,4 / 5,7 18,37 32,6,22 15,2 / 5,6 21,1 31,4,26 14,9 / 5,7 23,72 3,4,29 14,5 / 51,1 26,34 29,4,32 14,2 / 51,4,73,6,35 13,8 / 51,7 31,14 27,8,38 13,5 / 52, 33,39 27,1,4 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15,4 / 5,7 22,76 36,7,55 26, / 53,1 19,76 13,9,94 15,2 / 5,6 26,73 35,7,64 26, / 53,2 22,77 14,5 1,9 14,9 / 5,7 29,24 35,2,71 26,1 / 53,2 25,76 15,1 1,23 14,5 / 51,1 34,61 34,1,84 26,2 / 53,5,76 15,6 1,37 14,2 / 51,4 38,32 33,4,92 26,3 / 53,3 31,43 16,1 1,5 13,8 / 51,7 42,11 32,7 1,2 26,4 / 53,2 34,4 16,5 1,62 13,5 / 52, 45,68 32,1 1,1 26,5 / 53,2 36,6 16,9 1, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 14,7 / 5,4 18,82 32,3,23 14,1 / 5,8 21,91 31,,27 13,6 / 51,1 24,79 29,8,3 13,1 / 51,3 27,59,7,33 12,7 / 51,4 3,18 27,8,37 12,2 / 51,4 32,79 27,,4 11,8 / 51,4 35,24 26,2,43 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 14,7 / 5,4 23,42 36,6,56 26,2 / 53,4 2,23 14,,96 14,1 / 5,8 27,93 35,6,67 26,3 / 53,2 23,42 14,7 1,12 13,6 / 51,1 3,79 35,,74 26,4 / 53,1 25,76 15,1 1,23 13,1 / 51,3 36,56 33,8,88 26,6 / 52,9 29,61 15,8 1,41 12,7 / 51,4 4,61 33,1,98 26,7 / 52,8 32,39 16,3 1,54 12,2 / 51,4 44,76 32,3 1,8 26,8 / 52,6 35,2 16,7 1,67 11,8 / 51,4 48,7 31,7 1,17 26,9 / 52,4 37,79 17,1 1,8

31 Air Handling Unit Fidji Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Fan ø 4 9V 8V 7V 6V 5V 4V 3V 4V 3V Max. airflow recommended (efficiency 8% on wheel) Fan ø 45 5V 6V 7V Wheel 1,5 mm Wheel 2, mm Wheel 1,5 mm Wheel 2, mm 8V F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) V UNITES TERMINALES ET MINI CTA (m 3 /h)

32 32 Air Handling Unit Fidji 1 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 69,42 38,,85-81,54 34,7 1, - 92,42 32,1 1,13-12,48 29,9 1,25-111,81, 1,36-12,47 26,4 1,47-1,68 25, 1,57 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 63,48 34,2 1,53-38,91 14,8 1,86-76,85 32,3 1,85-46,38 15,8 2,21-89,16 3,7 2,15-53,15 16,6 2,53-1, 29,3 2,43-59,48 17,3 2,84-111,72, 2,7-65,38 17,9 3,12-121,99 26,8 2,94-7,88 18,4 3,38-131,84 25,8 3,18-76,12 18,9 3,63 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15,5 / 5,7,34 33,8,34 15,2 / 5,5 33,63 32,3,41 14,9 / 5,7 38,5 31,1,47 14,5 / 51,1 43,25 3,,52 14, / 51,6 47,95,9,58 13,6 / 51,9 52,31,,63 13,3 / 52,1 56,39 27,3,68 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15,5 / 5,7 32,85 36,7,79 25,9 / 53,1,4 13,9 1,34 15,2 / 5,5 4,14 35,6,97 26, / 53,2 33,75 14,6 1,61 14,9 / 5,7 47,2 34,6 1,13 26,1 / 53,2 38,99 15,3 1,86 14,5 / 51,1 53,91 33,8 1,3 26,2 / 53,3 44,4 15,8 2,1 14, / 51,6 6,88 32,9 1,47 26,3 / 53,3 48,79 16,3 2,33 13,6 / 51,9 67,45 32,2 1,63 26,4 / 53,2 53,25 16,8 2,54 13,3 / 52,1 73,66 31,5 1, 26,5 / 53,1 57,58 17,2 2, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 14,9 / 5,2,92 33,5,35 14,2 / 5,7 34,76 31,9,42 13,6 / 51,1 4,16 3,5,49 13,1 / 51,3 45,23 13,1 51,13 12,5 / 51,4 5,26,2,61 12, / 51,4 54,96 27,2,67 11,6 / 51,5 59,39 26,3,72 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 14,9 / 5,2 33,69 36,6,81 26,1 / 53,4,73 14, 1,37 14,2 / 5,7 41,82 35,5 1,1 26,3 / 53,3 34,8 14,8 1,66 13,6 / 51,1 49,57 34,4 1,2 26,4 / 53,1 4,8 15,4 1,91 13,1 / 51,3 57,1 33,5 1,38 26,6 / 52,9 45,5 16, 2,17 12,5 / 51,4 64,56 32,6 1,56 26,7 / 52,7 5,27 16,5 2,4 12, / 51,4 71,73 31,8 1,73 26,9 / 52,5 55,29 17, 2,64 11,6 / 51,5,59 31,1 1,9 27, / 52,3 59,69 17,4 2,85

33 Air Handling Unit Fidji 1 33 Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Fan ø 5 7V 6V 5V 4V 3V Fan ø 45 9V 6V 5V 4V 3V Max. airflow recommended (efficiency 8% on wheel) 7V 8V Wheel 1,5 mm Wheel 2, mm 8V Wheel 1,5 mm Wheel 2, mm F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) 9V UNITES TERMINALES ET MINI CTA (m 3 /h)

34 34 Air Handling Unit Fidji Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 16,87 37,5 1,3-123,51 34,5 1,51-138,68 32,1 1,69-152,68 3, 1,86-165,73,3 2,2-177,98 26,7 2,17-189,54 25,4 2,31 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 98,43 34, 2,37-6,89 14,9 2,9-116,89 32,3 2,82-71,27 15,8 3,4-134,12 3,8 3,24-8,84 16,5 3,85 -,32 29,4 3,63-89,74 17,2 4, - 165,64,2 4, - 98,8 17,8 4,68-18,18 27,1 4,35-15,95 18,3 5,5-194,4 26,2 4,68 -,41 18,7 5,41 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15,4 / 5,7 44,45 33,8,54 15,2 / 5,5 51,69 32,5,63 14,8 / 5,8 58,79 31,3,71 14,4 / 51,2 65,54 3,2,79 14, / 51,6 72,3 29,2,87 13,6 / 51,9,3,4,95 13,3 / 52,1 84,14 27,6 1,2 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15,4 / 5,7 55,22 37, 1,26 26, / 53,1 44,74 13,9 2,13 15,2 / 5,5 62,32 36, 1,5 26, / 53,2 52,31 14,5 2,49 14,8 / 5,8 72,5 35,1 1,75 26,1 / 53,2 59, 15,1 2,85 14,4 / 51,2 82,41 34,2 1,99 26,2 / 53,3 66,94 15,7 3,19 14, / 51,6 92,11 33,5 2,22 26,3 / 53,2 73,63 16,2 3,51 13,6 / 51,9 11,63 32,7 2,45 26,5 / 53,2 8,88 16,7 3,86 13,3 / 52,1 11,6 32,1 2,67 26,5 / 53,1 86,35 17, 4, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 14,7 / 5,4 45,47 33,5,55 14,1 / 5,8 53,56 32,,65 13,5 / 51,1 61,25 3,7,74 13, / 51,3 68,46 29,5,83 12,5 / 51,4 75,42,5,91 12, / 51,4 82,18 27,5,99 11,6 / 51,5 88,52 26,7 1,7 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 14,7 / 5,4 53,71 36,9 1,3 26,2 / 53,4 45,8 14, 2,18 14,1 / 5,8 65,11 35,9 1,57 26,3 / 53,2 53,82 14,7 2,57 13,5 / 51,1 76,29 34,9 1,84 26,5 / 53,1 61,96 15,3 2,95 13, / 51,3 86,98 34, 2,1 26,6 / 52,9 69,1 15,9 3,29 12,5 / 51,4 97,51 33,1 2,35 26,8 / 52,7 76,57 26,8 52,7 12, / 51,4 17,91 32,3 2,6 26,9 / 52,5 83,12 16,8 3,96 11,6 / 51,5 117,79 31,6 2,84 27, / 52,2 89,32 17,2 4,26

35 Air Handling Unit Fidji 35 Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Fan ø 56 4V 3V Max. airflow recommended (efficiency 8% on wheel) 5V 4V 3V 2 Fans ø 45 5V 6V 7V Wheel 1,5 mm Wheel 2, mm 6V 8V Wheel 1,5 mm Wheel 2, mm 9V F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) 7V 8V 9V UNITES TERMINALES ET MINI CTA (m 3 /h)

36 36 Air Handling Unit Fidji 2 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 134,3 34,6 1,64-153, 31,6 1,87-169,9 29,1 2,7-185,4 27, 2,26-199,7 25,2 2,44-213, 23,7 2,6-221,6 22,7 2,71 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 125,7 32, 3,3-74,1 16,1 3,53-147,1 3,1 3,55-85,4 17, 4,7-166,9,4 4,3-95,8 17,8 4,57-185,4 27, 4,47-15,3 18,5 5,2-22,6 25,7 4,89-114,1 19,1 5,44-218,8 24,5 5, - 122,4 19,6 5,84-229,5 23,8 5,54-127,8 19,9 6,9 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15.4 / ,6 31,9, / ,5 3,6, / ,2 29,4, / ,5,3, / ,2 27,4 1, / ,8 26,6 1, / ,4 26, 1,14 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15.4 / ,2 35,2 1, / ,1 14,9 2, / ,5 34,1 1, / ,2 15,6 2, / ,9 33,1 2, / ,2 16,2 3, / ,9 32,2 2, / ,8 16,8 3, / ,8 31,5 2, / , 17,2 4, 13.7 / ,6 3,7 2, / ,7 17,7 4, / ,8 3,2 3, / ,5 18, 4, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 13.9 / ,5 31,3, / ,8 29,7, / ,2,4, / ,5 27,1, / 5.9 9,1 26,1 1, / ,3 25,1 1, / ,4 24,5 1,24 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 13.9 / ,4 35, 1, / ,3 15,1 2, / ,1 33,8 1, / ,8 15,8 3, / ,7 32,7 2, / ,8 16,5 3, / ,4 31,7 2, / ,3 17,1 3, / ,5 3,8 2, / ,4 17,5 4, / ,8 29,9 3, / ,2 18, 4, / ,1 29,4 3, / ,1 18,3 4,77

37 Air Handling Unit Fidji 2 37 Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Fan ø 5 7V 6V 5V 4V 3V 2 Fan ø 45 9V 6V 5V 4V 3V Max. airflow recommended (efficiency 8% on wheel) 7V 8V Wheel 1,5 mm Wheel 2, mm 8V Wheel 1,5 mm Wheel 2, mm F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) 9V UNITES TERMINALES ET MINI CTA (m 3 /h)

38 38 Air Handling Unit Fidji 265 Coils performances without considering heat recovery outlet /6 C Outdoor air - 7 C / 9% - 173,5 34,9 2,12-197,9 31,8 2,42-219,9 29,3 2,68-239,9 27,2 2,93-258,4 25,4 3,15-275,7 23,9 3,36-291,8 22,5 3,56 45/35 C Outdoor air - 7 C / 9% 7/12 C Outdoor air 32 C / 4% - 163,5 32,4 3,94-97,7 15,8 4,66-191,6 3,6 4,62-112,8 16,8 5,38-217,6,9 5,25-126,6 17,6 6,3-241,7 27,5 5,83-139,2 18,2 6,64-264,4 26,2 6,38 -,9 18,8 7,19-5,7 25, 6,89-161,9 19,4 7,72-35,8 23,9 7,38-172,2 19,8 8,21 Coils performances by considering heat recovery outlet WHEEL with 1.5 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 15.4 / ,9 31,9, / ,1 3,6, / ,8 29,5 1, / ,2,4 1, / ,1 27,5 1, / ,8 26,6 1, / ,7 25,8 1,5 WHEEL with 1.5 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 15.4 / ,2 35,6 2,3 26. / ,7 14,7 3, / ,1 34,5 2, / ,5 15,3 3, / 5.7,7 33,5 2, / ,2 16, 4, / ,1 32,6 3, / ,3 16,5 4, / ,1 31,8 3, / ,8 17, 5, / ,9 31, 3, / ,7 17,5 5, / ,7 3,4 4, / ,5 17,9 6, WHEEL with 2 mm fins spacing 6/4 C O.A. - 7 /9% - R.A. 19 /5% 14. / ,3 31,3, / ,4 29,7 1, / ,6,4 1, / ,9 27,2 1, 11.7 / ,8 26,2 1, / ,4 25,2 1, / ,3 24,3 1,63 WHEEL with 2 mm fins spacing 45/35 C O.A. - 7 /9% - R.A. 19 /5% 7/12 C O.A. 32 /4% - R.A. 25 /5% 14. / ,2 35,4 2, / ,9 14,8 3, / ,2 34,2 2, / ,3 15,6 4, / ,3 33,1 3, 26.7 / , 16,3 4, / ,4 32,1 3, / , 16,8 5, / ,2 31,2 3, / ,6 17,3 5, / ,7 3,3 4, / ,8 17,8 6,5 1.8 / ,3 29,6 4, / ,4 18,2 6,46

39 Air Handling Unit Fidji Pressure drops (Pa) Heat recovery effi ciency (%) Total static pressure (Pa) Total static pressure (Pa) Fans ø 56 4V 3V Max. airflow recommended (efficiency 8% on wheel) 5V 4V 3V 3 Fans ø 45 5V 6V 7V Wheel 1,5 mm Wheel 2, mm 6V 8V Wheel 1,5 mm Wheel 2, mm 9V F9 bag fi lter (5%) F7 bag fi lter (5%) G4 fl at fi lter (5%) 7V 8V 9V UNITES TERMINALES ET MINI CTA (m 3 /h)

40 Non-contractual document. In a continuing effort to improve our products, we reserve the right to change specifications without previous notice. 4 Ed. 5//uk AIRCALO ZI Galaxie III 14 Avenue Cassiopée T: (33) Saint Médard en Jalles aircalo@aircalo.fr