Foot control. No instrument selected. A Raise chair Chair to working position 1 B Incline backrest Chair to spitting. positioning

Transcription

1 Quick guide

2 Foot No instrument selected Key Press briefly Preset ing A Raise chair Chair to working 1 B Incline backrest Chair to spitting C Lower chair Chair to entry and exit D Decline backrest Chair to working 2 e Switch operating light on/off F Open door lock g Activate preset Return chair to ing previous H I Instrument selected Key Key Micro motor Turbine Scaler Curing Syringe Camera press type light E Brief Select rotation scale F Brief Toggle water / Toggle water / air / both / off air / both / off G Long Chip blow Chip blow Freeze continuous continuous image H Long Run Run Run I Long Run Run Run : s Idle state The power is switched on, but the system is not currently doing anything. Scaler power The ACT text illustrates when scaler is in use. Micro motor speed The micro motor is in use. Curing light The curing light is selected.

3 Instrument bridge and suction head user interface Instrument bridge user interface Key Symbol Press briefly Function Press and hold Pre-set ing Timer/Menu Doorbell Start timer, duration 30 s or other preset time Open door, preset duration Activate menu Open door, continuous Bowl rinse Rinse bowl for preset duration D A C B Cup fill Rotation Fill cup for preset duration Change rotation scale Fill cup continuously Reverse rotation Instrument water Toggle instrument water on/off All instrument flushing Instrument air Toggle instrument air on/off Suction head user interface Operation light External device Switch on or off operation light Depends on configuration Chair up Raise chair Raise chair Chair to working 1 Backrest up Incline backrest Incline backrest Chair to spitting Chair down Lower chair Lower chair Chair to entry and exit D A B Backrest down Decline backrest Decline backrest Chair to working 2 C Preset Activate preset ing Saving s Return chair to previous

4 Saving your own settings Saving the s for chair Position the chair to the desired. Press and hold the -button to start saving. Select the desired memory slot (,,, ) with the corresponding button from the instrument panel. Selecting the memory slot Pre-set button 3 Utilisation 3.1 Allumer et couper le dispositif! Using pre-set s Press the -button to recall the pre-set s. Select the desired memory slot (,,, ) with the corresponding button from the instrument panel to recall the. -button returns the chair to previous. The factory settings, which can be altered: Chair to working 1 (the backrest up, working while sitting) Chair to spitting Chair to entry and exit Chair to working 2 (the backrest up, working while standing) Select the user Press and hold the -key on the instrument bridge. This will bring up the menu display. The menu can be operated using the, and -buttons on the instrument bridge. From the user selection you can choose the user and utilise saved settings. Avertissement! L''intérieur du boîtier de jonction est soumis à des niveaux dang d'air et d'eau sous pression. Seul un technicien de maintenance habilité à ouvrir le boîtier de jonction. Remarque! Lorsque l'appareil est allumé, la tablette d'instruments, le module d'a et la boîte de jonction sont soumis à de l'eau et de l'air sous pression Commutateur de mise sous tension Commutateur de mise sous tension Le dispositif est mis en marche ou arrêté grâce au commutateur de m Celui-ci contrôle toute l'électricité du dispositif. Si le commutateur est dispositif peut se faire sans danger. Lorsque le système n'est pas so l'eau à l'intérieur du dispositif sont dépressurisés. 3.2 Sélection de l'utilisateur Selecting the user Appuyer sur la touche de la tablette d'instruments et la mainten fiche le menu présenté à la figure suivante. MENU. TIMER USER CLOCK CART MOVE FLUSH (i ) Affichage du menu Cleaning and disinfecting Disinfecting the suction system insert the suction hoses to the connectors in the bottom of the cuspidor remove the filling hole lid pour the disinfectant solution into the filling hole wait until the solution has gone through the suction hoses. replace the suction hoses. All instrument flushing To start the all instrument flushing operation, press and hold the -button until the flush-menu appears. Insert instruments to the instrument flushing -holder. From the flush-menu, select the suitable time for flushing. The options are: 30 seconds, 3 minutes and 10 minutes. The min +1 and min -1 menu items adjust the 10 minute time accordingly. The water can be taken from the clean water bottle or from mains water. It is also possible to use a disinfection solution in the clean water bottle. After flushing with the desinfectant flush with fresh water before treatment. G

5 Quick start Switch the power on The main power switch is located in the connection box. Using pre-set s Press the -button to recall the pre-set s. Select the desired memory slot (,,, ) with the corresponding button from the instrument panel to recall the. Chair to working 1 (the backrest up, working while sitting) Chair to spitting Chair to entry and exit Chair to working 2 (the backrest up, working while standing) Switching power on Power switch Selecting the memory slot Pre-set button Position the chair The chair can be operated with joystick(s), remote foot, instrument bridge buttons, and suction head buttons. Positioning the chair Position the headrest The distance between the headrest and backrest can be adjusted simply by sliding the headrest in or out. Positioning the headrest The movements of the headrest are double articulated. Use the lever to lock the mechanism. Turning and detaching armrests Lift the armrest slightly. Turn it 900. Detach the armrest in this. Turning and detaching armrests 13:

6 Safety precautions Electricity and pressurised water and air Do not open the door of the cuspidor during the patient treatment to prevent the risk of an electric shock. The maximum connection voltage to the relays for the external devices is 24V. There are harmful voltage levels, pressurized air, and water inside the connection box. The connection box may be opened only by an authorized service person. To avoid the risk of an electric shock, this equipment must only be connected to supply mains with the protective earth. Connecting devices not compliant with IEC or IEC may cause an electric shock hazard. Do not touch non-medical devices simultaneously with the patient. There is a risk of electric shock. Only qualified service personnel is allowed to replace the remote foot s rechargeable batteries. Treating patients Check that there is water and not disinfecting solution in the clean water bottle before the treatment. Flush the water lines with fresh water before treating patients after using disinfection solutions. Follow the disinfectant liquid manufacturer s instructions. To avoid the risk of fire, this equipment must not be used with flammable anaesthetics. Using the chair Check that nothing is obstructing the movements of the chair to prevent damage to the system. Beware of damaging the instrument bridge arms when lifting the backrest of the chair. Do not sit on the backrest or footrest. They may bend under your weight. Check the tightness of the locking mechanism after adjusting the of the headrest. Instruments Check that the scaler gets water for cooling. The scaler may get damaged if it is not cooled. Avoid looking straight at the curing light because it may damage your eyes. Check the locking of the instrument drill bit mechanism after replacing the drill bit. The operating light Do not look straight into the operating light. Staring the light beam may cause damage to eyes. Maintenance and cleaning The display is not water proof. Beware wetting the display when cleaning the system. Use only bottles provided by Fimet Oy. Otherwise there is a possibility that the bottle breaks. Be cautious when using flammable disinfection/cleaning agents because of the risk of fire. Do not smoke or handle fire when handling flammable agents. Using instruments which are not disinfected or sterilised may cause infection hazard to the patient or operator. Follow the instrument manufacturer s instructions on disinfection and sterilisation. More information More information about using the Fimet Neo system is in the user guide. The user quide can be obtained from 3/2014/ek Fimet Oy Teollisuustie 6 FI Monninkylä Finland Tel: Fax: fimet@fimet.fi