Operating and Installation Instructions Ventilation Hood

Transcription

1 Operating and Installation Instructions Ventilation Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-us M.-Nr

2 Contents IMPORTANT SAFETY INSTRUCTIONS... 4 Caring for the environment Description of functions Con@ctivity 2.0 function Guide to the appliance Operation (Automatic mode) Cooking with Con@ctivity 2.0 (Automatic mode) Temporarily exiting Automatic mode Resuming Automatic mode Operation (Manual mode) Cooking without Con@ctivity 2.0 (Manual mode) Turning on the fan Selecting the power level Selecting the delayed shut down time Turning off the fan Turning overhead lighting on/off Power management Operation (Automatic and Manual modes) Filter saturation indicator Adjusting the filter saturation indicator for the grease filter Activating/changing the OdorFree Charcoal Filter operating hours counter Checking the filter saturation indicator Sensor button signal tone Cleaning and care Stainless steel housing Special instructions for glass surfaces Grease filters OdorFree Charcoal Filter Resetting the operating hours counter for the OdorFree Charcoal Filter Installation Before installation Removing the protective film Installation Instructions Disassembly Installation parts Appliance dimensions Distance between cooktop and ventilation hood (S)

3 Contents Installation recommendations Drilling diagram for wall mounting Exhaust duct Condensate trap Reducing Collar Electrical connection Activating Installation of the 2.0 stick Activating the 2.0 function Activating the ventilation hood Activating the cooktop Activation failed Deactivating Service and warranty Location of the data plate MieleCare Technical data

4 IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. Use CAUTION: For General Ventilating Use Only. Do Not Use To Exhaust Hazardous Or Explosive Materials And Vapors. This appliance is intended for residential use only. Use only as described in these operating instructions. This ventilation hood is not intended for outdoor use. It must only be used to extract and clean vapors produced during cooking. Any other use occurs at the owner's own risk. This appliance is suitable for installation above gas or electric cooking surfaces. Persons who lack physical, sensory or mental abilities, or experience with the appliance should not use it without supervision or instruction by a responsible person. 4

5 Children IMPORTANT SAFETY INSTRUCTIONS As with any appliance, close supervision is necessary when used by children. Please supervise children in the vicinity of the hood and do not let them play with it. Danger of suffocation! Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Technical safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Use this appliance only in the manner intended by the manufacturer. If you have questions, contact Miele. Before servicing or cleaning the appliance, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. If the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele s Technical Service Department for examination, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. A damaged ventilation hood oven can be dangerous. Always check for visible signs of damage. Never use a damaged ventilation hood. 5

6 IMPORTANT SAFETY INSTRUCTIONS Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. Reliable and safe operation of this hood can only be guaranteed if it has been connected to the electrical supply. To avoid damaging the ventilation hood, make sure that the connection data (voltage and frequency) on the data plate correspond to the building's power supply before connecting the appliance. When in doubt, consult a qualified electrician. Do not use a power bar or extension cord to connect the ventilation hood to electricity. These are a fire hazard and do not guarantee the required level of appliance safety. To ensure safe operation, only use the ventilation hood after it has been properly installed. This ventilation hood may not be used in non-stationary locations (e.g. on a ship). Adequate ventilation must be provided when the hood is operated simultaneously with devices that burn gas or other fuels. Only open the housing as described in the enclosed "Installation diagram" and in the "Cleaning and care" section of this manual. Under no circumstances should any other parts of the housing be opened. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operation faults. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safety of the appliance. 6

7 IMPORTANT SAFETY INSTRUCTIONS If the power cord is damaged, it must only be replaced by a qualified service technician. During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only completely isolated from the electricity supply if one of the following applies: The circuit breakers on the electrical service panel are tripped. The screw-type fuses on the electrical service panel have been removed. The power cable (if present) has been unplugged from the socket (pull the plug not the cord). Proper use WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. b) Always turn the hood on when cooking at a high heat. c) Clean the ventilation hood frequently. Grease should not be allowed to accumulate on the fan or filter. d) Use the proper pan size. Always use cookware appropriate for the size of the cooking area. Never use an open flame beneath the ventilation hood. To avoid the risk of fire, do not flambé or grill over an open flame. When turned on, the ventilation hood will draw any flames into the filter. Fat deposits may ignite. 7

8 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. b) NEVER PICK UP A FLAMING PAN - You may be burned. c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result. d) Use a fire extinguisher ONLY if: 1) You have a class ABC extinguisher, and you know how to operate it. 2) The fire is small and contained in the area where it started. 3) The fire department is being called. 4) You can fight the fire with your back to an exit. *Based on "Kitchen Firesafety Tips" published by NFPA. The ventilation hood may become damaged if exposed to excessive heat from a gas cooktop. When using the ventilation hood over a gas cooktop, ensure that any burners in use are always covered by cookware. Turn burners off when removing the cookware, even if doing so for just a short time. Select cookware that is suitable for the size of the burner. Adjust the flame so that it never extends up the sides of the cookware. Avoid overheating the cookware (e.g., when cooking with a wok). Always turn the ventilation hood on whenever a burner is in use to prevent damage from condensation. 8

9 IMPORTANT SAFETY INSTRUCTIONS Overheated oils and fats can ignite and set the ventilation hood on fire. When cooking with oils or fats, do not leave pots, pans or fryers unattended. Never leave an electric grill unattended when grilling. Fat and debris deposits impair the proper functioning of the ventilation hood. To ensure that cooking vapors are properly cleaned, never use the ventilation hood without the grease filters in place. There is a risk of fire if cleaning is not completed according to the instructions in this manual. Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot. Do not touch the housing or the grease filters until the ventilation hood has cooled down. 9

10 IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. b) Sufficient air is needed for combustion and exhausting of gases through the flue (chimney of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. c) When cutting or drilling into the wall or ceiling, do not damage electrical wiring and other hidden utilities. d) Ducted hoods must always be vented to the outdoors. e) Do not use this hood with any solid-state speed control device. To determine whether a ventilation hood may be operated above your cooking appliance, please refer to the information provided by the appliance's manufacturer. Safety regulations prohibit the installation of a ventilation hood above solid fuel stoves. Insufficient distance between the cooking appliance and the ventilation hood can result in damage to the hood. The minimum safety distances between the appliance and the bottom of the ventilation hood specified in the "Installation" section must be maintained, unless the appliance's manufacturer has indicated that a greater distance is required. If more than one cooking appliance is used beneath the ventilation hood, and if different minimum safety distances apply for these appliances, you should use the greater distance. 10

11 IMPORTANT SAFETY INSTRUCTIONS Be sure to observe the information contained in the "Installation" section when mounting the ventilation hood. Metal parts can have sharp edges which may cause injury. Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Exhaust air should not be vented into a chimney or vent flue which is otherwise in use and should not be channeled into ducting which ventilates rooms with fuel-burning installations. If exhaust air is to be extracted into a chimney or vent flue no longer used for other purposes, be sure to comply with all applicable regulations. WARNING: TO REDUCE THE RISK OF FIRE USE ONLY METAL DUCTWORK. Cleaning and care Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty will become void. 11

12 IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference. These devices must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 8" (20 cm) between the radiator and your body. Industry Canada Statement This digital apparatus does not exceed the Class B limits for Radio Noise Emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Complies with Canadian ICES-003 Class B specifications. 12

13 Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Do not dispose of this appliance with your household waste. Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Before discarding an old appliance ensure that it presents no danger to children while being stored for disposal. Unplug it from the outlet, cut off its power cord and remove any doors to prevent hazards. 13

14 Description of functions The following functions are available on your ventilation hood, depending on the model: Vented mode Recirculation mode The recirculation mode requires a recirculation kit and OdorFree Charcoal Filter (available as optional accessories, see "Technical Data" for more information) The air is drawn in and cleaned by the grease filters and directed outside. Non-return flap A non-return flap in the ducting prevents the exchange of inside and outside air from occurring when the ventilation hood is not in use. The flap is closed when the ventilation hood is turned off. When the ventilation hood is turned on, the non-return flap opens so that the exhaust air can be transported outside without any obstruction. A non-return flap has been provided with the hood in case your ducting does not have one. It is inserted into the outlet duct collar of the fan. The air is drawn in and first cleaned by the grease filters and then by an OdorFree Charcoal Filter. The cleaned air is then recirculated back into the kitchen. 14

15 Description of functions 2.0 function Automatic control This hood features a communication function which enables the automatic control of the hood based on the operational status of a Miele induction cooktop. The cooktop transmits information about its operational status to the hood using a radio signal. When a burner is turned on, the cooktop lighting on the hood turns on automatically. After a brief delay, the ventilation hood fan also comes on. During cooking, the hood automatically selects the fan level based on the number of burners in operation and their power levels. Once you have turned off the cooktop, the fan and the lighting will turn off automatically after a predetermined delay. Detailed information about this function can be found under "Operation." To enable the communication function, the cooktop must be equipped with the corresponding Con@ctivity 2.0 stick. Please refer to the installation instructions for the Con@ctivity 2.0 stick to determine whether connection to your cooktop is possible. There must be radio contact between the cooktop and the hood for you to be able to use the Con@ctivity 2.0 function (see "Activating Con@ctivity 2.0"). 15

16 Guide to the appliance 16

17 Guide to the appliance a Telescopic chimney b Chimney c Canopy d Control panel e Grease filters f Recirculation vent (only for recirculation mode) g LED cooktop lighting h OdorFree Charcoal Filter Optional accessory for recirculation mode i Sensor button for turning the fan on and off j Cooktop light sensor button k Sensor buttons for fan power selection l Sensor button for delayed shut-down function m Filter saturation indicator for the grease filters n Filter saturation indicator for the OdorFree Charcoal Filter 17

18 Operation (Automatic mode) When 2.0 is active, the hood always operates in Automatic mode (see "Activating 2.0"). See "Cooking without 2.0" for information on manually operating the hood. Cooking with 2.0 (Automatic mode) Turn on a burner to the desired power setting. Overhead cooktop lighting. After a few seconds, the fan will come on, briefly operating at power level 2 before immediately switching to level 1. The hood selects the fan level automatically during cooking. This level is determined by the total output of the cooktop, i.e. the number of burners in operation and the power settings selected. If you select a higher power setting on the cooktop or switch on multiple burners, the hood will switch to a higher fan level. If you select a lower power setting on the cooktop or turn off a burner, the hood will accordingly switch to a lower fan level. Reaction time Changing the power setting on the cooktop does not lead to an immediate increase or decrease in cooking vapors. For this reason, the hood reacts with a slight delay. Delays can also result from the fact that the cooktop transmits the information to the hood in intervals. The reaction time can vary from a few seconds to a couple of minutes. Examples for fan levels 1 to 4 18

19 Operation (Automatic mode) Cooking process If, for example, you switch on a burner at the highest power setting to heat cookware in preparation for searing and then reduce the power level after approx. 60 to 90 seconds, a cooking process is recognized. The hood turns on automatically and, after the cooktop power level has been reduced, switches back to fan level 3, where it remains for approx. 5 minutes. After this, the fan level is once again determined by the Con@ctivity function. You can also manually select a different fan level before then. Deactivation Turn off all burners. Over the next few minutes, the ventilation hood fan setting will decrease one level at a time until the hood eventually turns off. This helps to neutralize any lingering vapors and odors in the air. From the intensive setting, the fan immediately switches to level 3. If the fan is operating at level 3, it will switch to level 2 after approx. 1 minute. From level 2, the fan switches to level 1 after 2 minutes. After 2 minutes at level 1, the fan automatically turns off. After another 30 seconds, the overhead cooktop lighting turns off. The cooking process is now finished. 19

20 Operation (Automatic mode) Temporarily exiting Automatic mode To temporarily exit the Automatic mode when cooking: Manually select a different fan level, or Manually turn the hood off, or Activate the Delayed shut down function on the ventilation hood. The fan turns off after the delay time selected, and the lighting will remain on. The ventilation hood functions can now be operated manually (see "Cooking without Con@ctivity 2.0"). Resuming Automatic mode The ventilation hood resumes Automatic mode: If the ventilation hood has not been used for a period of approx. 5 minutes after the manual selection of a fan level, or If the manually selected fan level once again matches the automatic setting, or If the ventilation hood fan and the cooktop have been turned off for at least 30 seconds. Automatic mode will resume the next time the cooktop is turned on. If you wish to manually operate the ventilation hood for a complete cooking process, turn on the ventilation hood fan before turning on the cooktop. If the ventilation hood and the cooktop have been turned off for at least 30 seconds after you have finished cooking, Automatic mode will resume the next time the cooktop is turned on. 20

21 Operation (Manual mode) Cooking without 2.0 (Manual mode) The hood can be operated manually if: The 2.0 function is not activated. You have temporarily deactivated the 2.0 function (see "Temporarily exiting Automatic mode"). Turning on the fan Tap the On/Off button. The fan switches to level 2. Selecting the power level Power levels 1 to 3 can be used for light to heavy cooking vapors and odors. For strong vapors and odors that are temporarily produced when cooking, e.g., during searing, select the IS intensive level. Select the power level required by tapping a button from 1 to IS. Selecting the delayed shut down time It is a good idea to let the fan run for a few more minutes after cooking in order to neutralize any lingering vapors and odors in the air. With the delayed shut down function, it is possible to have the fan automatically shut off after a predetermined period of time. After you have finished cooking, tap the delayed shut down button. Once: fan switches off after 5 minutes (5 lights up). Twice: fan switches off after 15 minutes (15 lights up). If you press the delayed shut down button again, the fan remains turned on (5 15 goes out). Turning off the fan Press the On/Off button to turn the fan off. Reducing power of the intensive setting If power management is activated (default setting), the fan automatically switches back to level 3 after 5 minutes. 21

22 Operation (Manual mode) Turning overhead lighting on/ off The overhead lighting can be turned on and off separately from the fan. Tap the lighting button. Power management The ventilation hood features a power management system to help save energy. The fan power level is reduced and the lighting is turned off automatically. If the intensive setting is selected, the fan automatically switches to level 3 after 5 minutes. If the fan is set to level 3, 2 or 1, it switches back one fan setting after 2 hours and then in 30-minute intervals until the fan eventually switches off. If the overhead lighting is on, it automatically turns off after 12 hours. Turning power management on/off Turn off the fan and the lighting. Press the delayed shut down button for approx. 10 seconds until 1 lights up in the fan power display. Next, tap the following buttons in succession: The lighting button, Followed by the 1 button and then The lighting button again. If power management is turned on, the 1 and IS indicators will be continuously lit. If it is switched off, 1 and IS will flash. Tap 1 to turn off the power management. The 1 and IS indicators will flash. Touch IS to turn it on. The 1 and IS indicators are constantly lit. Confirm the setting by pressing the delayed shut down button. All the indicator lights will go out. If the setting is not confirmed within 4 minutes, the hood automatically reverts to the old setting. 22

23 Operation (Automatic and Manual modes) Filter saturation indicator The number of hours the hood has been in operation is stored in appliance memory. The filter saturation indicators show when the filters need to be cleaned or changed by lighting up the grease filter symbol or OdorFree Charcoal Filter symbol. Additional information on cleaning and changing the filters and resetting the filter saturation counters can be found under "Cleaning and care." Adjusting the filter saturation indicator for the grease filter You can set the filter saturation indicator to suit your cooking habits. The factory default setting is a cleaning interval of 30 hours. Select a shorter time (20 hours) if you often fry foods. We also recommend a shorter cleaning interval if you only cook occasionally. This will prevent grease buildup from hardening and making cleaning more difficult. Select a longer cleaning interval of 40 or 50 hours if you use very little fat when cooking. Press the On/Off button to turn off the fan. Tap the delayed shut down button and the grease filter button at the same time. The grease filter symbol and one of the fan power level indicators will flash. The indicators 1 to IS show the current time setting: Indicator hours Indicator hours Indicator hours Indicator IS hours Tap the relevant button to select the time required. Confirm your choice by touching the grease filter button. All the indicator lights will go out. If the setting is not confirmed within 4 minutes, the hood automatically reverts to the old setting. 23

24 Operation (Automatic and Manual modes) Activating/changing the OdorFree Charcoal Filter operating hours counter The OdorFree Charcoal Filter is required for extraction mode. The operating hours counter for the OdorFree Charcoal Filter requires onetime activation and must be set to match your cooking habits. Press the On/Off button to turn the fan off. Tap the delayed shut-down button and the OdorFree Charcoal Filter button at the same time. The OdorFree Charcoal Filter symbol and one of the fan setting indicators will flash. The indicators 1 to IS show the current time setting: Indicator hours Indicator hours Indicator hours Indicator IS... deactivated Tap the relevant button to select the time required. Confirm your choice by tapping the OdorFree Charcoal Filter button. All the indicator lights go out. If the setting is not confirmed within 4 minutes, the old setting is retained. Checking the filter saturation indicator Before the set operating time has run out, you can check what percentage of the time has elapsed. Press the On/Off button to turn the fan on. Press and hold the grease filter button or the OdorFree Charcoal Filter button. One or more of the power level indicators will flash. The number of flashing indicators shows the elapsed operating hours as a percentage. Indicator % Indicators 1 and % Indicators 1 to % Indicators 1 to IS % The elapsed operating hours remain stored in the memory when the hood is turned off or if power to the appliance is lost. 24

25 Sensor button signal tone Whenever you select a feature with the sensor buttons, you will hear a brief signal tone. You can deactivate this signal tone if you prefer. Operation (Automatic and Manual modes) Press the On/Off button to turn the fan off. Tap the IS and the grease filter buttons at the same time for approx. 5 seconds until a short signal tone is heard. The signal tone is now turned off for all functions. To reactivate the signal tone, follow the same steps. If the hood is disconnected from the power supply, or after a power interruption, the beep is automatically reactivated, regardless of the previous settings. 25

26 Cleaning and care WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "IMPORTANT SAFETY INSTRUCTIONS". Stainless steel housing General information The surfaces and control buttons are susceptible to scratching and chipping. Observe the following cleaning instructions. Clean all surfaces and control buttons using warm water and liquid dish soap. Apply with a sponge cloth. After cleaning, dry the surfaces with a soft cloth. Avoid the following: Cleaners containing soda, acid or chloride, or cleaners containing solvents Abrasive cleaners such as scouring powder, scouring liquid, abrasive sponges such as pot scourers, or used sponges that still contain residues from abrasive cleaners Special instructions for stainless steel surfaces Stainless steel surfaces can also be cleaned using a non-abrasive stainless steel cleaner. To prevent the surfaces from quickly becoming dirty again, we recommend treating them with a stainless steel care conditioner. Apply sparingly over the entire area using a soft cloth. Special instructions for RAL color finish housing (special order) Observe the general cleaning instructions contained in this chapter. Minor scratches on the surface are inevitable when cleaning the housing. Depending on the lighting in the kitchen, this may negatively affect the appliance's appearance. Special instructions for glass surfaces Glass surfaces can be cleaned using a cleaning agent specifically designed for glass. 26

27 Cleaning and care Grease filters The reusable metal grease filters in the appliance remove the solid particles contained in kitchen vapors (fat, dust, etc.), thereby preventing the ventilation hood from becoming dirty. A dirty filter is a fire hazard! Cleaning intervals Over longer periods of time, fat buildup on the grease filter hardens and makes cleaning more difficult. Therefore, we recommend cleaning the grease filters once every 3-4 weeks. By illuminating the grease filter symbol, the filter saturation counter reminds you to regularly clean the grease filters. You can adjust the interval of the filter saturation counter to match your cooking habits (see "Operation"). Removing the grease filters During removal, the filter may drop to the ground. This can result in damage to the filter and the cooktop. During cleaning, be sure to hold the filter securely. To remove a grease filter, release the locking clip. Then, open the filter to a 45 angle, unhook it, and remove it from the hood. Cleaning the grease filters by hand Clean the filters with a soft nylon brush in a mild solution of hot water and dish soap. Do not use undiluted dish soap. Unsuitable cleaning agents Unsuitable cleaners can cause damage to the filter surfaces if used regularly. Do not use any of the following: Lime removers Abrasive powders or abrasive liquids Aggressive all-purpose cleaners and degreaser sprays Oven sprays 27

28 Cleaning and care Cleaning the grease filters in the dishwasher Place the filters as upright as possible in the lower basket. Ensure that the spray arm is not obstructed. Use a common dishwashing detergent. Select a program with a wash temperature between 120 F (50 C) and 150 F (65 C). In a Miele dishwasher use the "Normal" program. Depending on the detergent used, cleaning the filters in a dishwasher may cause the inside filter surfaces to become discolored. However, this will not affect the functioning of the filters in any way. If the filters have been installed incorrectly, you can insert a small screwdriver into the slit to disengage the locking clip. Resetting the filter saturation indicator for the grease filter Once cleaning is complete, the filter saturation indicator must be reset. While the fan is turned on, press the grease filter button for approx. 3 seconds, until only the 1 is flashing. The grease filter symbol goes out. When cleaning the grease filters before the full operating time has elapsed: Press the grease filter button for approx. 6 seconds, until only the 1 is flashing. After cleaning After cleaning, leave the filters on an absorbent surface to dry. When removing the filters for cleaning, also clean off any accessible oil or fat buildup from the housing. Doing so will prevent a fire hazard. Reinstall the grease filters. When inserting the filters, make sure that the locking clip is facing down. 28

29 Cleaning and care OdorFree Charcoal Filter If the hood is equipped for recirculation, an OdorFree Charcoal Filter must be installed in addition to the grease filters. This filter is designed to absorb odorcausing agents and is mounted in the canopy above the grease filters. OdorFree Charcoal Filters are available from your Miele dealer or from Miele. See "Technical data" for the type and reference number. Installing/replacing the OdorFree Charcoal Filter To install or replace the OdorFree Charcoal Filter, the grease filters must first be removed as described above. Remove the charcoal filter from its packaging. When to change the OdorFree Charcoal Filter Always replace the OdorFree Charcoal Filter whenever it no longer absorbs kitchen odors effectively. Replace the filter at least once every 6 months. The OdorFree Charcoal Filter saturation counter will light up to remind you to change the charcoal filter regularly. The OdorFree Charcoal Filter saturation counter requires one-time activation before use (see the "Operation" chapter). Slide the OdorFree Charcoal Filter into the back of the intake frame, then push the front of the filter up into the frame. Reinstall the grease filters. When installing the filter for the first time, activate the filter saturation counter (see "Operation"). 29

30 Cleaning and care Resetting the operating hours counter for the OdorFree Charcoal Filter If the operating hours counter is activated, it must be reset each time the filter is changed. Press the OdorFree Charcoal Filter button for approx. 3 seconds with the ventilation hood switched on until only the indicator light for level 1 is flashing. The OdorFree Charcoal Filter symbol will go out. If you replace the OdorFree Charcoal Filter before the full operating time elapses: Press the OdorFree Charcoal Filter button for approx. 6 seconds until only the indicator light for level 1 is flashing. Disposing of the OdorFree Charcoal Filter Used OdorFree Charcoal Filters can be disposed of with normal household waste. 30

31 Installation Before installation Before installing the appliance, read all of the information contained in this chapter and also in the "IMPORTANT SAFETY INSTRUCTIONS" section. Removing the protective film The housing components are covered by a protective film to prevent them from damage during transport. Please remove this film before installing the housing components. It can be peeled off easily without any additional tools. Installation Instructions Please refer to the accompanying installation sheet for instructions on how to install the appliance. Disassembly If the device ever needs to be disassembled, follow the installation sheet instructions in reverse order. A lever is provided to assist with the removal of the chimney. Unscrew the two mounting screws on the chimney. Slide the supplied lever between the chimney and the extension piece. Pry the chimney out of its attachment. 31

32 Installation Installation parts 32

33 Installation a 3 protective installation sheets for use when installing the chimney b 1 exhaust connector for an exhaust duct 6" (150 mm). c 1 reducer for an exhaust duct 5" (125 mm). d 1 non-return flap for installation in the outlet duct collar of the motor unit (not for recirculation mode). Depending on the device version, the non-return flap is already mounted. e Telescopic wall bracket for securing the hood on the wall. f Recirculation kit for recirculation mode contains diverter, aluminum hose and hose clamps (not contained in scope of delivery, available as optional accessory see "Technical Data"). 6 screws ³/₁₆" x 2 ³/₈" (5 x 60 mm) and 6 plugs ⁵/₁₆" x 2" (8 x 50 mm) for attaching to the wall. Plugs not for use in USA / CDN. The screws and plugs are designed for use in solid walls only. Use different fasteners for other wall construction types. Make sure that the wall can support the load. 2 x M 6 lock nuts for mounting the appliance unit. 2 screws ¹/₈" x ⁵/₁₆" (3.9 x 7.5 mm) for attaching the chimney. 1 lever for disassembling the chimney. Montage Installation Montaje Montaggio Montering Montagem Asennus Installation sheet 33

34 Installation Appliance dimensions The drawing is not to scale. a Extraction b Recirculation 34

35 Installation c Air vent positioned at top for recirculation de Mounting area (only d is required for recirculation hoods). Wall and ceiling area for exhaust duct opening and for wall socket installation. Only the wall socket installation is required for recirculation hoods. Vent collar 6" (150 mm), with adapter 5" (125 mm). Distance between cooktop and ventilation hood (S) Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood. Please also observe the information contained in the "IMPORTANT SAFETY INSTRUCTIONS" section. Cooking appliance Electric Cooktops Electric Barbeques and Fryers Multiburner Gas Cooktops 43,000 BTU/hr (12.6 kw), no burner > 15,000 BTU/hr (4.5 kw). Multiburner Gas Cooktops 73,800 BTU/hr (21.6 kw), no burner > 16,500 BTU/hr (4.8 kw) Multiburner Gas Cooktops > 73,800 BTU/hr (21.6 kw), or one of the burners > 16,500 BTU/hr (4.8 kw) Single Burner Gas Cooktops 20,500 BTU/hr (6 kw) Single Burner Gas Cooktops > 20,500 BTU/hr (6 kw) 27,600 BTU/hr (8.1 kw) Single Burner Gas Cooktops > 27,600 BTU/hr (8.1 kw) Minimum distance S Miele appliance 24" (610 mm) 26" (660 mm) Non-Miele appliance 26" (660 mm) 30" (760 mm) 30" (760 mm) Not possible 26" (660 mm) 30" (760 mm) 30" (760 mm) Not possible 35

36 Installation Installation recommendations We also recommend a distance of at least 26" (660 mm) above electric cooktops to provide more workspace and easier cooking under the hood. When selecting an installation height, always take the user height into consideration. Users should have ample space to work comfortably on the cooktop and reach the ventilation hood controls with ease. Please note that the greater the distance from the cooktop, the less effective the hood is at drawing in the cooking vapors. To achieve optimal vapor extraction, make sure that the hood covers the cooktop. The hood should be positioned centrally over the cooktop, not to the side or rear. The cooktop should be no wider than the hood. Preferably, it should be narrower. The mounting area must be easily accessible. The ventilation hood should be easy to reach and disassemble in case a service call is necessary. This should be taken into consideration when planning the position of cabinetry, shelves, ceilings or decorative elements in the vicinity of the ventilation hood. Drilling diagram for wall mounting When drilling, please follow the directions contained on the accompanying installation sheet. When installing a custom back wall with pre-drilled holes, please refer to the drilling distances in the drawing above (screws ³/₁₆" (5 mm)). 36

37 Exhaust duct Only use smooth pipes or flexible duct hoses made from nonflammable materials for exhaust ductwork. To achieve the greatest possible air extraction with the lowest noise levels, please note the following: The diameter of the exhaust duct should not be less than 6" (150 mm). If flat exhaust ducts are used, the cross section should not be smaller than that of the exhaust connector. The exhaust duct should be as short and straight as possible. If elbows are needed, make sure they have a large radius. The exhaust duct itself must not be kinked or compressed. Make sure that all connections are secure and airtight. If the exhaust air is to be conducted into a vent flue, the intake piece must be aligned with the flow direction of the flue. When installing the exhaust duct horizontally, you must slope it away from the source by at least ³/₈" per 3' 3" (1 cm per meter). This ensures that condensate cannot drain back into the ventilation hood. If the exhaust duct is to be routed through rooms, ceiling space etc., the temperatures in these different areas may differ greatly, which means that the problem of condensation will need to be addressed. The exhaust duct will need to be insulated. Condensate trap Remember that any constriction of the airflow will reduce extraction performance and increase operating noise. If the exhaust duct is to be routed through an outside wall, we recommend installing a telescopic wall vent or a rooftop vent (available as an optional accessory). In addition to insulating the exhaust duct, we recommend installing a condensate trap to collect and evaporate any condensate which might accumulate. Condensate traps are available for exhaust ducts with a diameter of 5" (125 mm) or 6" (150 mm). 37

38 Exhaust duct When installing a condensate trap, make sure that it is positioned vertically and, if possible, directly above the hood outlet duct collar. The arrow on the housing indicates the direction of airflow. Reducing Collar (optional accessory) If you would like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 400 CFM. Check local building codes for max. CFM requirements. Push the Reducing Collar on the exhaust port of the fan. Push the exhaust hose over it. Secure both with a hose clamp. 38

39 Electrical connection WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: All electrical work should be performed by a qualified electrician in strict accordance with national regulations (for USA: ANSI-NFPA 70) and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. Ensure that power to the appliance is OFF while installation or repair work is performed. Verify that the voltage, load and circuit rating information found on the data plate (located behind the baffle filters), match the household electrical supply before installing the hood. Use only with ventilation hood cordconnection kits that have been investigated and found acceptable for use with this model hood. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele s Technical Service Department. Grounding Instructions WARNING - Improper grounding can result in a risk of electric shock. This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing a path of least resistance. This appliance is equipped with a cord having a grounding wire with a grounding plug. If there is any doubt, have the electrical system of the house checked by a qualified electrician. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance. The plug must be plugged into an outlet that is properly installed and grounded. WARNING - Grounding instructions (Canada) The grounding-type attachment plug shall be connected to a groundingtype receptacle installed in accordance with CSA C , Canadian Electrical Code, Part I. WARNING: THIS APPLIANCE MUST BE GROUNDED 39

40 Activating 2.0 Installation of the 2.0 stick In order for you to be able to use the 2.0 function, the cooktop must be equipped with a Con@ctivity 2.0 stick. See the relevant installation instructions of the Con@ctivity 2.0 stick. Activating the Con@ctivity 2.0 function To use the Con@ctivity 2.0 function, the radio link between the cooktop and the ventilation hood must be activated. Both appliances must be installed and operational. Wireless connection must be activated on the ventilation hood and the cooktop at the same time. Activation on the ventilation hood is described below. Activation on the cooktop is described in the relevant operating and installation instructions. Please refer to the operating instructions before starting. Activate the ventilation hood first, then the cooktop. Activating the ventilation hood The cooktop and hood must be turned off. Press the delayed shut down button for approx. 10 seconds until 1 lights up in the fan setting display. Next, tap the following buttons in succession: The 1 button, Then the IS button, And then the lighting button. The hood is in log on / log off mode. If the wireless connection is already activated, 2 and 3 will light up at the same time. If there is no wireless connection, 2 and 3 will flash constantly (Con@ctivity 2.0 is already activated or a remote control is logged on). To activate Con@ctivity 2.0, tap the IS button. The search for a wireless connection will start. As this is happening, begin activation on the cooktop. 40

41 Activating 2.0 Activating the cooktop While the ventilation hood is searching for a wireless connection, start activation on the cooktop. More information can be found in the operating instructions for the cooktop. When the cooktop registers that connection has been established, confirm activation on the ventilation hood with the delayed shut-down button All indicators will go out. Confirm activation on the cooktop. The Con@ctivity 2.0 function is now ready for use. If you do not confirm within 4 minutes, activation will be canceled. You only need to carry out the activation procedure once. If the appliances are disconnected from the electricity supply, for example during a loss of power, they will still remain activated. Activation failed If a wireless connection cannot be established despite activation of the Con@ctivity function on the ventilation hood and cooktop, the function must first be deactivated and then reactivated on both appliances. Deactivating Con@ctivity 2.0 Deactivation on the ventilation hood is similar to the activation procedure. Select the IS instead of the 1 button. To deactivate the cooktop, please refer to the corresponding operating instructions. Please keep in mind that disabling the connection will also disable any remote control function being used. The remote control must then be reactivated. 41

42 Service and warranty For faults that you cannot resolve on your own, please contact your Miele dealer or Miele Technical Service. The telephone number for Miele is listed at the back of these instructions. When contacting Miele, please state the model and serial number of your ventilation hood. These can be found on the data plate. Location of the data plate The data plate is visible once you have removed the grease filters. MieleCare This service is available in USA only. MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory trained professionals can guarantee the safety, reliability, and longevity of your Miele appliance. Please note that unless expressly approved in writing by Miele s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. To learn more about MieleCare Extended Service Contracts, please contact your appliance dealer or visit us online at: 42

43 Fan motor LED cooktop lighting Total connected load Voltage, Frequency Fuse rating Technical data 350 W 3 x 3 W 359 W 120 V AC, 60 Hz 15 A Power cord length 2.5 ft. (0.75 m) Weight Optional accessories for recirculation mode: Recirculation kit DUW 20 and OdorFree Charcoal Filter DKF lbs (26 kg) Contains FCC ID: 2ACUWEI8800 IC: 5669C-EI8800 This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 43

44

45

46

47 Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ Phone: Fax: Technical Service & Support Nationwide Phone: Fax: TechnicalService@mieleusa.com Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 Customer Care Centre Phone: customercare@miele.ca International Headquarters Miele & Cie. KG Carl-Miele-Straße Gütersloh Germany

48 DA 6690 W en-us M.-Nr / 07