! Service. Vacuum cleaner HR 8514 HR 8532 HR 8536 HR /04. Philips Domestic Appliances and Personal Care

Transcription

1 Vacuum cleaner HR 8514 HR 8532 HR 8536 HR 8539! Service Information Philips Domestic Appliances and Personal Care PRODUCT INFORATION aximum air displacement aximum vacuum water column Power consumption (IEC) Dust storage capacity Cord length (depends on version) Filter system Dimensions cleaner Weight cleaner OPTIONAL : 32 I/sec : 240 cm : 1200 W : 3 l : 6 or 8.5 metres : Paper dustbag : otor inlet filter : Exhaust air filter : 44.5 x 29.5 x 25 cm : 5.5 kg Exhaust air filter HR 6932 = Sydney cotton dustbag HR 6997 = Sydney paper dustbag HR 6998 = Sydney closable pap.dustbag HR 6999 = Turbo brush HR 6988 = Items 37,38 and 39 can be used if the version is provided with an electrically switched park assist. Item 71 up to and including item 80. The assembly of accessories depends on the national version. To connect the nozzle, the telescopic tube and the handle: insert the narrowed section into the wider section while turning it a little (fig. 1). To disconnect: pull while rotating. To adjust the telescopic tube (item 74) to the required length, pull the locking knob in the direction of the arrow (fig. 2) while sliding the top section of the telescopic tube into or outof the lower section. SERVICE INFORATION To open the appliance, first remove the control panel (item 11) with a big screw driver to disconnect the 2 snap locks (see drawing). Component configuration on exploded view may differ in case of specific versions. However, the actual components are distinguished bij means of code numbers. If a repair has been made, make sure that all functions of the appliance are working correctly. The spare parts have been standardized as much as possible. Item 6, cotton dustbag, is used in those countries where paper dustbags are not available. Item 21 is provided with a long cordwinder spring; both long and short cords can be used in combination with this spring. fig. 1 fig. 2 To (dis)assemble the appliance use TOR screw driver no T15 = , which is one of a set consisting of T20, T15, TI0, T9, T8, T7 and T6 = Depending on the original length of the cord, the spare cord must be shortened. Adjusting the PCB on the motor to 220V, 60Hz. 1. ake sure that the potentiometer (item 36) is set at min. position. 2. Adjust the potentiometer on the PCB item 45, on the motor to 220V/60Hz to allow the motor to run smoothly. Please note: the standard setting of the spare PCB is 230V/50Hz. There are opencircuit voltages on all wires. SH coding: ( sahara yellow ) ( racing green ) ( blue purple ) ( california white ) Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands Copyright reserved Subject to modification /04 PCS

2 HR Description Pos Dust indicator spring Packing ring Sydney closable pap. dustbag Sydney nonclosable pap. dustbag Sydney cotton dustbag Dustbag carrier Clamp of dustbag carrier Dust compartment sealing Badge Turn knob Turn knob Turn knob Inlett grille Safety filter Bufferring motor otor disc Cord out let Lower housing + wheels Exhaust air filter Air outlet grill Reel half spring unit Brake tyre Reel half contact unit Contact ring plate Cord set Australia Cord set Japan/low voltage Cord set UK Cord set 4.8 mm pins Cord set Swiss Cord set Italy Dustbag sealing Caster Cover Rearwheel Speed control V PCS

3 HR Description Pos Speed control V Cord winder lever Clamp parkaid icro switch parkaid Lever parkaid Push button switch otor cover Rear motor buffer Suspension bracket otor power PCB 230V50Hz otor power PCB V PCB clamp otor V/5060Hz otor V electr. otor V electr otor V otor V Spring switchknob Clip metal tube etal tube Clip telesc.tube Telescopic tube Bend + hose ass'y Bend ass'y Crevice nozzle Small nozzle Big nozzle Strip of big nozzle HR 851. or AIN PARK AID AIN C C HR 853. or AIN PARK AID AIN ROTARY ROTARY OTOR POWER ODULE POTETER OTOR POWER ODULE POTETER

4

5

6 PCS PCS AUSTRALIA 26 JAPAN 27 GB 28 B EUROPE Ø 4.8mm 29 CH 30 ITALY B DAP0295

7 DAP274