SMHA Hatch High temperature fan HT-fan Installation and Maintenance
|
|
- Scot Richardson
- 5 years ago
- Views:
Transcription
1 High temperature fan HT-fan Installation and Maintenance
2 Contents 1. Important information 2. Safety notes 3. Technical description 4. Transport 5. Mounting instructions 6. Commissioning 7. Maintenance 8. Faults 9. Spare parts 10. Fan code 11. Declaration of conformity Revisions: 1. Generated
3 1 Important Information Fläkt Woods HT-fans comply with the requirements for EN standard and health and safety of the EC Machinery Directive. All fans leave the factory after being subjected to testing. These instructions are intended for use by professional service staff. The installation, commissioning and operation of the fans must be carried out by professional staff, who are familiar with the safety regulations. Tools and protective equipment necessary for preventing accidents from occurring while installing and operating the fan must be used/worn in accordance with the local safety regulations. All personnel involved with the product must carefully study this operating manual and diligently comply with all orders and instructions. Fläkt Woods does not accept responsibility for any damage that can be attributed to nonobservance of these instructions. The warranty issued by the manufacturer will be forfeited if any changes to the product are made without the manufacturer s consent. 2 Safety Notes This symbol is designed to point out all safety and danger related information regarding danger on the operating personnel s lives and health. 3
4 3 Technical Description 3.1 Design Between the hatch and casing is sealing material. Both hatch and casing have isolation material between metal sheets. 3.2 Specification The equipment is an axial fan with casing designed for use as an exhaust fan in high temperature emergency conditions. The product is not allowed to be used in normal ventilation. The fan is driven by an enclosure electric motor classified to F400(120) in accordance with EN The hatch and fan are integrated to be one certified unit. Hatch is opened by 2 electrical motors, which are dimensioned to cover both snow and wind load. The fan itself should be started 30 seconds after the hatch motors have been started. 4 Product type SMHA Fan type: JMHT axial fan Class: F400(120) Notified body : VTT Expert Services, 0809 Certificate nr: 0809-CPD-0703 Temperature class: F400(120) Motor: F400(120) classified class H/class F motor for fan 2 pcs 230 V spindle motors
5 3.3 Fan and motor range Fan code rpm kw A Voltage Hz IEC SMHA JMHT40/16/2/ , /3V SMHA JMHT40/16/2/ ,7 3,6 400/3V SMHA JMHT50/20/2/ ,7 3,6 400/3V SMHA JMHT50/20/2/ ,8 9,3 400/3V M SMHA JMHT80/20/4/ ,6 7,3 400/3V L SMHA JMHT80/25/4/ ,8 9,7 400/3V M SMHA JMHT80/25/4/ ,6 12,5 400/3V S SMHA JMHT80/25/4/ ,1 400/3V M SMHA JMHT100/31/4/ ,6 12,5 400/3V S SMHA JMHT100/31/4/ ,9 400/3V M SMHA JMHT100/31/4/ ,2 400/3V L SMHA JMHT125/50/4/ ,2 400/3V L SMHA JMHT125/50/4/ ,6 400/3V Dimensions Size A B C D E F G H Mass/kg* *) Mass with max motor 5
6 4 Transport 4.1 Transport inspection Check the fan immediately after you receive it and make sure that it has not been damaged during transport. If you discover any damage, get in touch with the transportation company without delay. Check the information on the fan rating plate. Proper procedures must be followed when transporting the product! Faulty conditions in transporting may result in serious damage on the product 4.2 Transport Safety The transport material is to be selected according to the packaging and the weight of the product. Loading must be carried out as instructed. 4.3 Intermediate Storage If the fan is to be stored before or in between uses, the following needs to be taken in account: Original packaging is to be used. If the storage conditions require it, additional protection may be added The hatch of the product must be closed during the storage. During long time storage indoor premises must be used. 6
7 - 5 Mounting Instructions 5.1 Installation of the Fan The fan can be installed directly on the roof or on to special fundament made for the fan. The maximum roof fall is 12. The fan is secured to a base by minimum 4 bolts, look picture. The base must be level and stable. Residual risk due to inappropriate behaviour or malfunction during operation cannot be completely excluded. The system planner or constructor must prevent the emergence of any hazardous situations through suitable safety measures. 7
8 5.2 Fitting the Accessories The flashing (made of 4 different pieces) is fixed screws. Corners shall be sealed to avoid water leakage. 5.3 Safety Regulations In case, when the hatch is open and maintenance work for fan is done, there is a risk of fall through the fan opening, especially in case, when the fan is removed from it s place. The care shall be taken to prevent fall during the maintenance work. 5.4 Electrical Connections All electrical connections must be wired by authorised personnel only. The necessary electrical and safety precautions must be taken into account. The fan is equipped with 2 safety switches, one for the fan motor and one for the opening motors. Electrical connections shall be done as shown in picture. The hatch is equipped with switches showing, if the hatch is closed or open. Motor cable shall be fire proofed and bushing through the casing shall be sealed. Limit switch shall be used only for the indication of the hatch. Start signal for the motors shall be organised from separate system. Fan motor shall be started not earlier than 30 sec after hatch motors. 8
9 6 Commissioning 6.1 Preparation Open the hatch and connect the motor rods to fastenings. Connect the mains to motors to close the hatch. 6.2 Safety Checking Rotate the shaft and check that the impeller can move freely. Make sure that there are no foreign objects in the fan or in the ducting. Also check that there is no unusual noise in the fan. Check that the installation work has been carried out in accordance with the relevant regulations. All necessary protective devices must be installed. Check also, that there is big enough air flow to compensate fan air flow. Check, that all other regulations related to fire safety are followed. The fan may only be commissioned after all proper procedures have been followed and all necessary inspections have been carried out. 6.3 Test Run Briefly switch on the power supply to the motor to check whether the fan impeller rotates in the correct direction. If the impeller is rotating in the correct direction shown with the arrow, the fan may be switched on. Check that no abnormal mechanical sound and no surging occurs. 9
10 7 Maintenance 7.1 Warranty A precondition of the warranty is that regular maintenance has been carried out. Defects under warranty must immediately be notified to the manufacturer or the importer. The warranty does not cover service work or indirect damages. 7.2 Maintenance Before maintenance Switch off the power supply to the fan and hatch motors at the safety isolating switches. The hatch is staying open, when the safety switch is turned off from mains. However, make sure, that hatch cannot be falling down during the maintenance Inspection intervals Inspection intervals can be defined by local authorities. If nothing else is mentioned, the fan shall be tested according to the intervals in table, but at least once a year. The annual inspection must be done by authorized persons only. Pos. Description Fan Commisioning 6 months 12 months 1 Control, that hatch can be opened freely x x x 2 Control, that fan motor will start 30 s after hatch opening motors x x x 3 Control the correct rotation direction of fan x x x 4 All installed warning lights are OK x x 5 All labels are available and can be seen x x 6 Fan motor and hatch opening motors are visually OK x x 7 The fan is test run x x 8 Whole product is visually checked against failures x x x Make the control protocol Motor 10 1 Check bearing noise during test run x 2 Lubricate bearing if needed x 3 Check proper rotation of impeller x 4 Visual control x x 5 Bearings shall be re-lubricated every 3 years Checking the Motor Bearings The motors are meant to be operated in emergency conditions only. The motor bearings have to be lubricated in accordance with the instructions that accompany the motor, latest at 3 years intervals. Replacements of bearings are to be done in accordance with the motor manufacturers instructions.
11 7.2.4 Impeller The impeller shall be clean. 7.3 Replacing the Motor and the Impeller The fan will have to be disconnected from the unit before the motor can be replaced. SMHA-040,050,080, , Check that the fan motor and hatch-motors are disconnected from mains 2. Remove outlet guard 3. Remove impeller from motor shaft by opening locking screw from shaft end 4. Remove impeller from the shaft, take care, that the key is not dropping down 5. Motor rotor can be lifted up and bearings can be checked SMHA-sizes and all size 125 versions 1. Remove complete fan and lift it outside the casing for maintenance 2. Follow instructions of JMHT for maintenance 7.5 Final inspection Check that: The impeller is mounted for the correct direction of rotation. All screws and nuts have been tightened. No foreign objects have been left in the fan or in the ducting. 8. Faults If any faults occur during inspection which cannot be repaired by maintenance personnel, please contact the service department at Fläkt Woods. Examples of faults can include the following issues: - foreign particles inside fan - corrosive media inside - too high vibrations - not correct maintenance - hatch not opening Possible problems generated: - bearing damage - corrosion damage - vibration generated damage 11
12 9. Spare parts Use only genuine spare parts supplied/accepted by Fläkt Woods. If other spare parts are used, no warranty or EN-certification is valid. Spare parts: - fan motor - hatch motor 10. Fan code Smoke fan SMHA- aaa- bbb- cc- dd Fan size 040,050,080,100,125 Motor power 048=4.8 kw etc First c 1= inlet guard ( in case of free inlet) 2= inlet flange ( in case of ducted inlet) Second c Version=0 in the beginning Pitch angle 12
13 13
GLEB Kitchen exhaust fan
GLEB Kitchen exhaust fan Installation and Maintenance??.1.2013 Contents 1. Important information 2. Safety notes 3. Technical description 4. Transport 5. Mounting instructions 6. Commissioning 7. Maintenance
More informationKITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE
KITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE 2 GLEC-6 - Installation and maintenance CONTENTS 1 Important information... 3 2 Safety notes... 3 3 Technical description...4 4 Transport... 6 5
More informationGLEB. >> Installation and Maintenance. Air Comfort. Air movement. Duct & Box Fans
Air Comfort Air movement Duct & Box Fans GLEB KITCHEN exhaust FAN >> Installation and Maintenance Kitchen Exhaust Fan GLEB Installation and Maintenance Important Information, Safety notes, Technical Description
More informationCENTRIFLOW 3D. >> Installation and Maintenance. air comfort. CentriFlow 3D
CENTRIFLOW 3D Plug fan GMEC >> Installation and Maintenance air comfort CentriFlow 3D 2 Plug Fan CentriFlow 3D GMEC Installation and Maintenance Important Information, Safety notes, Technical Description
More informationSmoke extract fan SMHA HATCH
12.11.2012 Contents Product overview... 3 Construction... 4 Specification... 5 Selection... 6 Installation... 7 Electrical connections... 8 Dimensions and weights... 9 Product code and accessories... 10
More informationInstallation and Maintenance Novax Smoke Exhaust Fan Type ACN Smoke
918149-0 GB Installation and Maintenance Novax Smoke Exhaust Fan Type ACN Smoke 1. Application 2. Handling 2.1 Marking 2.2 Weight 2.3 Transport 3. Storage 4. Installation 4.1 Prior to attachment 4.2 Attachment
More informationSTORAGE, ERECTION, OPERATION AND MAINTENANCE MANUAL FOR CENTRIFUGAL FANS MODEL - MXE
ISO 9001 : 2000 STORAGE, ERECTION, OPERATION AND MAINTENANCE MANUAL FOR CENTRIFUGAL FANS MODEL - MXE CUSTOMER : 1 CONTENTS 1 SAFETY... 5 1.1 General... 6 1.2 Description of symbols and pictograms... 6
More informationOperating Instruction Centrifugal fans without scroll (Translation of the Original) BA-RLE-AC /2014 RLE RLA
Operating Instruction Centrifugal fans without scroll (Translation of the Original) EN RLE RLA Content 1. Important information 2. Safety notes 3.Technical description 4. Transport 5. Mounting / Installation
More informationACN SMOKE INSTALLATION AND MAINTENANCE
NovAx ACN SMOKE INSTALLATION AND MAINTENANCE 918149-0 English 918149-0 GB Installation and maintenance NovAx smoke exhaust fan type ACN smoke 1. Application 2. Handling 2.1 Marking 2.2 Weight 2.3 Transport
More informationCleaning unit for coolant. :_decftez`_>r_fr] Book No.: V2
Cleaning unit for coolant :_decftez`_>r_fr] Book No.: 1271526-02 V2 Alfa Laval Separation AB Separator Manuals, dept. SKEL S-147 80 Tumba, Sweden Telephone: +46 8 53 06 50 00 Telefax: +46 8 53 03 10 40
More informationF17W44_MFB_F_EN INSTALLATION INSTRUCTIONS
F17W44_MFB_F_EN INSTALLATION INSTRUCTIONS Contents Page User instructions 3-5 General 3 Fan installation 3-4 Maintenance 3 Electrical installation 5 Troubleshooting 5 Technical description 6-8 General
More informationJet Fan Types AUC/ARC/AUR/ARR/AUO/ARO Installation and Maintenance
916503-0 GB Jet Fan Types AUC/ARC/AUR/ARR/AUO/ARO Installation and Maintenance 1. Main components 2. Application 3. Handling 3.1 Marking 3.2 Weight 3.3 Transport 4. Storage 1. Main components: Types ARC,
More informationAZN ATEX INSTALLATION AND MAINTENANCE
ZerAx AZN ATEX INSTALLATION AND MAINTENANCE 924714-0 English 924714-0 GB ZerAx axial flow fans type AZN ATEX Installation and maintenance 1. Application 2. Handling 2.1 Marking 2.2 Weight 2.3 Temperature
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL TUBE AXIAL FANS BTA, WTA, HTA, DDA The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended
More information40E ELECTRIC FAN HEATER
40E ELECTRIC FAN HEATER PRODUCT MANUAL IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE ASSEM- BLING, STARTING OR SERVICING THE HEATER. IMPROPER USE OF HEATER CAN CAUSE SERIOUS INJURY. KEEP THIS MANUAL
More information40E ELECTRIC FAN HEATER
40E ELECTRIC FAN HEATER PRODUCT MANUAL IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE ASSEM- BLING, STARTING OR SERVICING THE HEATER. IMPROPER USE OF HEATER CAN CAUSE SERIOUS INJURY. KEEP THIS MANUAL
More informationTTV 4500 / TTV 4500 HP / TTV 7000
TTV 4500 / TTV 4500 HP / TTV 7000 EN OPERATING MANUAL AXIAL FAN TRT-BA-TTV4500-4500HP-7000-TC-003-EN Table of contents The current version of the operating manual can be found at: Notes regarding the operating
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL
CENTRAL FANS COLASIT LTD Unit 12A, Palmers Road, East Moons Moat, Redditch. Worcs. B98 0RF Tel: 01527-517200 Fax: 01527-517195 Edition 04_13 INSTALLATION, OPERATION & MAINTENANCE MANUAL CIV Fan Range Valid
More informationINSTALLATION FB T: +44 (0) F: +44 (0) E: W:
INSTALLATION FB 1 Contents User instructions General Fan installation Maintenance Electrical installation Troubleshooting Technical description General Classification Technical specification Manufacturer
More informationInstructions for the BASIC BCRW Fan, Sizes General
Instructions for the BASIC BCRW Fan, Sizes 004 027 1. General The BCRW is a direct-driven fan of axi-centrifugal design. This fan offers excellent power efficiency, low, uniform air flow, low sound generation
More information1. Description INSTRUCTION FOR AIR BLAST COOLER TYPE COOL 450
1. Description General The cooler is used for cooling of water, oil or other liquid by use of air. The liquid is passing in the tubes where it transfere the energy to the air via the fins on the outside
More informationInstallation and assembly instructions. for standard configuration radial blowers
Installation and assembly instructions for standard configuration radial blowers 001_KL01_01 Printed in Germany We reserve the right to change the information and illustrations shown in this operating
More informationOPERATING MANUAL ORWAK March 2005 PUBL. NO Edition 4
GB OPERATING MANUAL ORWAK 3400 March 2005 PUBL. NO 4869057-00 Edition 4 English TABLE OF CONTENTS Safety... 82 Operating instructions... 93 Technical specifications. 104 Dimensional drawing... 104 Transport...
More informationCombiGrinder. Instruction manual. Grinder for cattle, horse and pet clipper blades. swiss made. Version/Index: CombiGrinder/A 09-16
swiss made CombiGrinder Grinder for cattle, horse and pet clipper blades Instruction manual Version/Index: CombiGrinder/A 09-16 1 Instruction manual / CombiGrinder Contents 1 Safety regulations 1.1 Symbols
More informationAXPR Wall Mounted Axial Panel Fans
Bulletin 78-January-03-06 AXPR Wall Mounted Axial Panel Fans INSTALLATION, OPERATION, AND MAINTENANCE MANUAL This publication contains the installation, operation and maintenance instructions for the AXPR
More informationBESF Box Ventilator. Installation & Operating Manual USA CAN READ AND SAVE THESE INSTRUCTIONS
Installation & Operating Manual 3001806 03.02 USA CAN BESF Box Ventilator READ AND SAVE THESE INSTRUCTIONS 1200 Northmeadow Parkway, STE 180 Roswell, GA 30076 (770) 587-3238 (800) 255-2923 Fax (770) 587-4731
More informationHORIZONTAL MULTISTAGE CENTRIFUGAL PUMP
HORIZONTAL MULTISTAGE CENTRIFUGAL PUMP WWPPCHLFT260 Instructions WWPPCHLFT260_Horizontal Multistage Centrifugal Pump_IB.indd 1 READ THIS MANUAL CAREFULL BEFORE INSTALL, START THE PUMP 1. Suction 2. Plug
More information1. Description INSTRUCTION FOR BLAST COOLER TYPE COOL 250. Material
1. Description General The cooler is used for cooling of water, oil or other liquid by use of air. The liquid is passing in the tubes where it transfere the energy to the air via the fins on the outside
More informationIEC- Direct-driven radial fans with IEC-Standardmotor
EHND / ERND / ERNE / Contents. / Page 1. / Safety... 2 2. / Description... 4 3. / Condition of use... 4 4., / Storage, Transport... 5 5. / installation... 6 6. / operation... 8 7. / maintenance... 9 8.
More informationHandling or using the product improperly and in disregard of the instructions with this mark might result in serious bodily injury or death.
Please Read: Safety Precautions DC AC In order to ensure that this product is used safely, be sure that you read and understand the following precautions fully and use the product only as directed. Be
More informationThis label warns for risk of electrical shock when failing to observe.
MANUAL horizontal centrifugal pumps MB series ic drive SB series mechanical seal 1. Introduction 2. Safety precautions 3. Receipt 4. Installation / Operation and Maintenance 4.1 Installation 4.2 Operation
More informationOPERATION AND MONTAGE MANUAL ROOF FANS
NO RF/U/2017 (ENGLISH) (valid since 13.10.2017) ROOF FANS RF / RFV Venture Industries Sp. z o.o. is not responsible for any damage caused by improper use of the fan and reserves the right to modify this
More informationMontageanleitung RLO (Original) Mounting Instructions RLO (Translation of the original)
Montageanleitung (Original) (Translation of the original) DE MA_ 1.0 06/2014 Taperlock Clamping-bush system _0 _1 Fixed hub Inlet nozzle with IMV 1. Revision index Revision Date MA_ 1.0 06/2014 2. Safety
More informationXB-EFA-8L-BK & XB-EFA-8R-BK
Supply & Extract Ventilation Unit with Heat Recovery The EMC Directive 2014/30/EU The Low Voltage Directive 2014/35/EU The information contained in this document provides details of installation, operation
More information½ Monitored Pneumatic Valve Patented Technology
½ Monitored Pneumatic Valve Patented Technology PBM4-S (Valve only air service equipment not included) SUITABLE FOR RISK CATEGORY 4 APPLICATIONS As per AS4024.1-Part 1502 & 1502 SIL 3 as per IEC 61508
More informationAXIS-QA G TUBO-M/MZ AXIAL FANS. Axis / Tubo OPERATION MANUAL
TUBO-M/MZ AXIS-QA AXIS-Q TUBO-F AXIS-QR AXIS-F AXIS-QRA AXIS-QA G AXIAL FANS EN OPERATION MANUAL www.blaubergventilatoren.de CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements
More informationAcquaer Ltd. H-4900, Fehérgyarmat, Szatmári út 11. CENTRIFUGAL PUMP Instruction Manual ACm60 / ACm75 / ACm150 / ACm150B2
CENTRIFUGAL PUMP Instruction Manual ACm60 / ACm75 / ACm150 / ACm150B2 Congratulations on your purchase of a LEO Centrifugal Pump It is important that you read, fully understand and observe the following
More informationSOUND-INSULATED FAN. Iso-K OPERATION MANUAL. Iso-K_v.1(2)-EN.indd :20:59
SOUND-INSULATED FAN OPERATION MANUAL _v.1(2)-en.indd 1 10.08.2015 15:20:59 CONTENT Introduction 3 General 3 Safety rules 3 Transport and storage requirements 3 Manufacturer's warranty 3 Fan design 4 Delivery
More informationOriginal operating instructions Safety switch with guard locking AC901S AC902S
Original operating instructions Safety switch with guard locking AC901S AC902S 7390914/03 01/2017 Contents 1 Preliminary note...4 1.1 Explanation of symbols...4 2 Safety instructions...4 3 Items supplied...5
More informationMonitored Pneumatic Valves On Series Ported Manifold
Monitored Pneumatic Valves On Series Ported Manifold Patented Technology SUITABLE FOR RISK CATEGORY 4 APPLICATIONS As per EN 954-1 & AS4024.1 SIL 3 as per IEC 61508 Applications Include: Pneumatic Presses
More informationTFV 900 OPERATING MANUAL RADIAL FAN TRT-BA-TFV900-TC-001-EN
TFV 900 EN OPERATING MANUAL RADIAL FAN TRT-BA-TFV900-TC-001-EN Table of contents Notes regarding the operating manual... 1 Safety... 2 Information about the device... 3 Transport and storage... 4 Start-up...
More informationOPERATION AND MONTAGE MANUAL ROOF FANS
NO RFEC/U/2017-1 (EN) (valid since 18.08.2017) ROOF FANS RF/EC...-... / RFV/EC...-... Venture Industries Sp. z o.o. is not responsible for any damage caused by improper use of the fan and reserves the
More informationPanel Fan Series Operators Manual (Galvanized and Polymer)
Panel Fan Series Operators Manual (Galvanized and Polymer) Galvanized Panel Fan with Three Wing Blade IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble,
More informationEnglish CNA-CNB. Centrifugal fans Installation and maintenance
916505-0 English CNA-CNB Centrifugal fans Installation and maintenance 916505-0 GB Centrifugal fans types CNA, CNB, CNA-M and CNB-M installation and maintenance 1. Application 2. Handling 2.1 Marking 2.2
More information18 INCH HIGH VELOCITY FLOOR FAN
18 INCH HIGH VELOCITY FLOOR FAN MODEL NO: CFF18B100 PART NO: 3231530 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 - ISS 1 INTRODUCTION Thank you for purchasing this CLARKE 18 inch
More informationInstaller manual AG-AA10. Air/air heat pump IHB GB AG-AA10-30 AG-AA10-40/50
-30 Installer manual Air/air heat pump -40/50 IHB GB 1516-1 331554 Table of Contents 1 Important information 2 5 Installation 7 Safety information 2 Model combinations 7 Read before starting the installation
More informationHOT 2000 USER MANUAL. Version 3.1. This manual shall be read in its entirety before using the machine.
HOT 000 USER MANUAL Version 3. This manual shall be read in its entirety before using the machine. IMPORTANT SAFETY INSTRUCTIONS When using Hot 000, basic precautions should always be taken, including
More informationFLUEBOOST. flueboost 350 gas fire model
350 FLUEBOOST flueboost 350 gas fire model The flueboost is a box shaped unit with in line spigots for the flue connection, a pressure switch to ensure safe operation and plug-in electrical fittings for
More information½ Monitored Pneumatic Valves On Series Ported Manifold
½ Monitored Pneumatic Valves On Series Ported Manifold Patented Technology SUITABLE FOR RISK CATEGORY 4 APPLICATIONS As per AS4024.1-Part 1502 & 1502 SIL 3 as per IEC 61508 & EN ISO 13849-1 Applications
More informationINDOOR USE ONLY. Installation and Maintenance XTRACTOR. (ESX) 1 and 3 phase, Direct Drive, Fans for indoor use
TOP INDOOR USE ONLY Introduction Units are rectangular in section and have circular/rectangular rigid spigots at each end. Four matching mounting feet are supplied with the unit. Full size access panels
More informationRHMP01 MULTI PURPOSE FAN
INSTRUCTIONS & WARRANTY RHMP01 MULTI PURPOSE FAN INTRODUCTION Congratulations on purchasing a Russell Hobbs Multi-Purpose Fan. Each unit is manufactured to ensure safety and reliability. Before using this
More informationCentrifugal Fan Turbofan Type KT/KP
Instruction Manual TF-113-01 Centrifugal Fan Turbofan Type KT/KP Do not carry out operation, inspection or maintenance of the fan until you read this manual and understand the content. Keep this manual
More informationV80-H Multistage Pump Instruction Manual
V80-H Multistage Pump Instruction Manual PRODUCT OVERVIEW The VADA horizontal multistage centrifugal pumps combine the functional benefits of centrifugal pumps and the practical benefits of self priming
More informationAP-EH500-L/RQA9837. Installation Guide
AP-EH500-L/RQA9837 Duct Mounted Burst Fire Heater The EMC Directive 2004/108/EC The Low Voltage directive 2006/95/EC 1.0 Duct Mounted Burst Fire Heater This Burst Fire Heater should only be used as a supplementary
More informationRegister at
Power Shovel Model No. 38361 Serial No. 313000001 and Up Register at www.toro.com. If, after carefully reading this manual, you still have questions or problems, call toll free 1-800-808-2963 (US) or 1-800-808-3072
More informationGRUNDFOS INSTRUCTIONS. Sololift2 C-3. Installation and operating instructions
GRUNDFOS INSTRUCTIONS Sololift2 C-3 Installation and operating instructions English (US) English (US) Installation and operating instructions Original installation and operating instructions. CONTENTS
More informationUSER S MANUAL. VCU/VCUN Series CENTRIFUGAL FAN IN SCROLL CASING
USER S MANUAL VCU/ Series CENTRIFUGAL FAN IN SCROLL CASING 2 CONTENTS Introduction Use Delivery set Designation key Technical data Safety requirements Design and operating logic Mounting and set-up Connection
More informationAXUS - SC Short Cased Axial Flow Fans Installation and Maintenance
1.0 INTRODUCTION AXUS - SC Short Cased Axial Flow Fans Installation and Maintenance The Nuaire Short Cased Axial Fan range is produced in a range of sizes from 250mm to 1600mm diameter. Cases are manufactured
More informationOriginal instructions. Operation Manual & Cautions
Original instructions Operation Manual & Cautions Thank you for purchasing the Mistresa from Showa Denki. This manual explains the specifications for the [Mistresa units from CRN Series]. Please read the
More informationManual Power relay SR853
Manual Power relay SR853 Product types SR853.8.x.x, Rev. 1 SR853 manual page2 The symbols WARNING, CAUTION, NOTE This symbol warns of a serious hazard. Failure to observe this warning may result in death
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT... 3 Performance Data... 4 Performance Table... 5 General description... 6 Fan Chart-explanation
More informationUSER S MANUAL. Centrifugal inline fan. VKMz 100 Q VKMz 100 VKMz 125 Q VKMz 125. VKMz 250 Q VKMz 250 VKMz 315 Q VKMz 315
USER S MANUAL VKMz 100 Q VKMz 100 VKMz 125 Q VKMz 125 VKMz 150 VKMz 160 VKMz 200 Q VKMz 200 VKMz 250 Q VKMz 250 VKMz 315 Q VKMz 315 Centrifugal inline fan VKMz CONTENTS Contents... 2 Safety requirements...
More informationLong Case Axial Fan. Installation and Wiring Instructions V/1/50Hz & V/3/50Hz
Long Case Axial Fan Installation and Wiring Instructions 220-240V/1/50Hz & 380-415V/3/50Hz RAD INSTRUCTIONS IN CONJUNCTION WITH ILLUSTRATIONS PLAS SAV THS INSTRUCTIONS Installation and Wiring Instructions
More information100 FLUEBOOST
100 FLUEBOOST f l u e b o o s t 1 0 0 The flueboost is a box shaped centrifugal fan unit with in line spigots for the flue connection, a pressure switch to ensure safe operation, all within a compact package.
More informationCENTRIFUGAL FAN IN SCROLL CASING. Helix S-Vent OPERATION MANUAL
CENTRIFUGAL FAN IN SCROLL CASING Helix S-Vent EN OPERATION MANUAL Helix / S-Vent www.blaubergventilatoren.de CONTENTS CONTENTS 3 Introduction 3 Use 3 Delivery set 4 Technical data 10 Safety requirements
More informationPanel Fan Series Operators Manual (Galvanized and Polymer)
Panel Fan Series Operators Manual (Galvanized and Polymer) 52" Belt Drive, Galvanized Panel Fan with Three Wing Blade IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before
More informationBottle Height Adjustment Bottle Diameter Adjustment Cork Length Adjustment Cork Depth Adjustment
P55 Champagne Corker Setup and Maintenance Read this carefully before operating the corker. One person should be assigned to maintain the corker. Only this primary operator should make adjustments to the
More informationECOSMART TWINFANS. (EST) 1 phase, Direct Drive, Run & Standby Fans for indoor use. Installation and Maintenance
TOP ECOSMART TWINFANS (EST) 1 phase, Direct Drive, Run & Standby Fans for indoor use Installation and Maintenance The EMC Directive 2014/30/EU The Low Voltage directive 2014/35/EU INDOOR USE ONLY Introduction
More informationAXIAL FANS USER S MANUAL
AXIAL FANS USER S MANUAL WARNING! Disconnect the fan from power supply prior to any connection, servicing and repair operations. Only duly qualified electricians with valid electrical permit for electric
More informationIDE 20 / IDE 30 / IDE 50 IDE 60 / IDE 80
IDE 20 / IDE 30 / IDE 50 IDE 60 / IDE 80 EN OPERATING MANUAL OIL HEATER TRT-BA-IDE20-30-50-60-80-TC-001-EN Table of contents Information on the use of this manual... 1 Scope of delivery... 1 General safety...
More informationSELF-PRIMING JET PUMPS
SS Anti-Rust SS Shaft Copper & Cold-rolled SELF-PRIMING JET PUMPS CONTENTS 1. Applications.... Model Description.... Technical Data... 4. Implementation Standards... 5. Safety Precautions... 6. Product
More informationSWP. (Models SWP08 through SWP20) IMPORTANT! Read before proceeding! OPERATION & MAINTENANCE MANUAL
SWP (Models SWP08 through SWP20) OPERATION & MAINTENANCE MANUAL IMPORTANT! Read before proceeding! Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationInstallation of Glass Lined Equipment
Installation of Glass Lined Equipment Information given herein is for guidance only and may not be complete. It is important that only trained and competent personnel are permitted to handle glass lined
More information40LM Hz INSTALLATION, START-UP AND SERVICE INSTRUCTIONS CHILLED WATER FAN COIL UNIT
Carrier International Sdn. Bhd. Malaysia INSTALLATION, START-UP AND SERVICE INSTRUCTIONS CHILLED WATER FAN COIL UNIT 40LM 120-200 50Hz CONTENTS: Physical Data & Dimension 1-3 Safety Considerations 4 Rigging
More informationp Permanent magnet water cooled motors Additional manual
p Permanent magnet water cooled motors Additional manual Safety Instructions 1 General General safety regulations, safety precautions and specific agreements made for each work site shown in this document
More informationDry cooler Type XP120
61358 Directions for use 1 Declaration by the Manufacturer, Annex II B As defined by the EC Machinery Directive (MD) 98/37/EC, the Low Voltage Directive (LVD) 2006/95/EC and the EMC Directive 2004/108/EC.
More informationWaste water ejection unit
Waste water ejection unit Over ground box SWH 500/50-80 SWH 500/50-80 Operation manual Table of contents: Page Declaration of conformity... 3 1. General... 4 1.1 Introduction... 4 1.2 Enquiries and orders...
More informationVADA - V80-H PRODUCT OVERVIEW CONSTRUCTION USAGE LIMITATIONS MOTOR WARRANTY
PRODUCT OVERVIEW The VADA horizontal multistage centrifugal pumps combine the functional benefits of centrifugal pumps and the practical benefits of self priming pumps. They warrant high hydraulic and
More informationOperating instructions
ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 (0) 793-0 Fax +49 (0) 793-0 info@de.ebmpapst.com www.ebmpapst.com CONTENTS. SAFETY REGULATIONS AND NOTES. Levels of hazard warnings.
More informationRustibus 2000 DIESEL. (mk2)
OPERATION MANUAL 200-2000 Rustibus 2000 DIESEL (mk2) DECLARATION OF CONFORMITY Manufacturer: Dalseide Shipping Services AS bekkjarviksundet 1 N-5397 BEKKJARVIK NORWAY The authorised representative In the
More informationSubmersible Grinder Pump Type ABS Piranha S10 - PE125
60 Hz 04/2018 Installation, Operating and Maintenance Instructions www.sulzer.com 2 Installation and Operating Instructions Submersible Grinder Pump Type ABS Piranha 60 Hz: Ex (1 & Non-Ex (2 Ex (1 & Non-Ex
More information3 in 1 Garden Vacuum 9255 Instructions for Use
Leaf Blower-Vac/Patio Cleaner Technical Specifications Model GY 8113 Rated voltage 230V Rated frequency 50Hz Rated power consumption 3000W Mains fuse(delayed action) 13A Speed 15000 rpm Max. blower air
More informationChemical Motor Pump Unit BN
Operating & Maintenance Instructions BW 5 02 01 / 1 The operating instructions of the centrifugal pump and the accessories should be located close to the pump. These instructions should be read carefully
More informationInstallation/Instruction Manual
1510876HC8902 Pressurized ventilators (for device cooling) Model Blade diameter (cm) Indoor or outdoor EF-20UYS-UL EF-25UAS-UL EF-30UBS-UL 20 25 30 Indoor Installation/Instruction Manual For customers
More informationInstallation and Operating Instructions
ELECTRICALLY OPERATED FOLDING STAIRS Installation and Operating Instructions Premier Loft Ladders ltd Registered Office: 2 Dawson Drive, Trimley St Mary, Felixstowe, Suffolk. IP11 0YW Registered in England
More informationINSTRUCTION MANUAL. operates with ISO9001 certified quality system. TECSYSTEM S.r.l Corsico (MI) Tel.: Fax:
INSTRUCTION MANUAL BAR 1200-1800-3600 1MN0080 Rev 0 operates with ISO9001 certified quality system TECSYSTEM S.r.l. 20094 Corsico (MI) Tel.: +39-024581861 Fax: +39-0248600783 http://www.tecsystem.it R.
More informationCopy Right By: Thomas T.S. Wan
Chapter 23 Motor and Starter Copy Right By: Thomas T.S. Wan 温到祥著 Sept. 3, 2008 All rights reserved Electric Motors All the motors are to be designed and constructed in accordance with NEMA code. Electric
More informationELECTRIC RADIANT OUTDOOR / INDOOR HEATER
ELECTRIC RADIANT OUTDOOR / INDOOR HEATER INSTALLATION, OPERATION & MAINTENANCE MANUAL IMPORTANT INSTRUCTIONS SAVE THESE INSTRUCTIONS Prior to installing and operating the heater, read these instructions
More informationCRU-S Series Stainless Steel Condensate Recovery Unit
IM-UK-CRU-S UK Issue 1 CRU-S Series Stainless Steel Condensate Recovery Unit 1. Safety information 2. General product information 3. Installation 4. Commissioning 5. Storage, shutdown and equipment protection
More informationEHA Hoffmann International GmbH
EHA Hoffmann International GmbH Operating Instructions EHA - Embossing Press 50-75 Professional Machine number: Model year: The side shelfs are optional and are not included in the Standard scope of delivery.
More informationLow-voltage motors SIMOTICS GP, SD, DP Safety instructions for SH
Low-voltage motors SIMOTICS GP, SD, DP Readme You can find the associated operating instructions in the Internet: Low-voltage motors (https://support.industry.siemens.com/cs/ww/en/ps/13309/man) Technical
More informationEC Box Fan www.flaktwoods.com/oandm Safety, Installation, Operation and Maintenance Instructions CONTENTS Paragraphs Safety 1 Handling/Storage 2 Installation (Mechanical) 3 Fig. 1: Fig. 2: Tilt Mechanism
More informationUse and Maintenance Manual. WPA-E-N/Ex. II 2 G c Ex e II T3. ATEX marking: Explosion proof stand fans WPA-E-N/Ex
1 Use and Maintenance Manual Explosion proof stand fans WPA-E-N/Ex ATEX marking: II 2 G c Ex e II T3 18.10.2016 Explosion proof stand fans WPA-E-N/Ex 2 Contents: 1. Introductory Remarks... 3 2. Application...
More informationRX550i Electric Pressure Washer
RX550i Electric Pressure Washer READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. KEEP THIS MANUAL FOR FUTURE REFERENCE. Products covered
More informationInstructions for the fan motor control system with integrated wiring terminals SILVER C
Instructions for the fan motor control system with integrated wiring terminals SILVER C 1. General The motor control system is used for controlling the type EC, 0.41-10 kw fan motors in the SILVER C units.
More informationFRL 10 Centrifugal blowers
FRL 10 Centrifugal blowers User instructions 2 Kongskilde Blower model FRL10. Motor mounting instructions Motor Specifications: Model FRL 10 Blower/Aspirator fans are designed to be driven by Single or
More informationINLINE CENTRIFUGAL FAN. Centro-M OPERATION MANUAL
INLINE CENTRIFUGAL FAN OPERATION MANUAL www.blaubergventilatoren.de CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements 3 Manufacturer's warranty 4 Fan design 4 Delivery
More informationINLINE СENTRIFUGAL FAN BOX BOX-R OPERATION MANUAL
INLINE СENTRIFUGAL FAN BOX BOX-R OPERATION MANUAL CONTENT 3 Introduction 3 General 3 Safety rules 3 Storage and transportation rules 3 Manufacturer s warranty 4 Fan design 4 Delivery set 5 Technical data
More informationSPECIFICATION DELETED SECTION CENTRIFUGAL HVAC FANS
SECTION 23 34 16 CENTRIFUGAL HVAC FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Drawings and general provisions of the contract, including General and Special Conditions and Division 01 Specification
More informationIndustrivej 3-9 DK 9460 Brovst KEF-MOTOR A/S. Fax Instruction Manual PSD 200 Industrial Grinders
KEF-MOTOR A/S Industrivej 3-9 DK 9460 Brovst Tlf. +45 9823 6088 Fax. +45 9823 6144 1. Instruction Manual PSD 200 Industrial Grinders EU declaration of conformity KEF-MOTOR A/S Industrivej 3-9 DK-9460 Brovst
More information