INSTRUCTION MANUAL SC-CX910 VACUUM CLEANER HOUSEHOLD USE ONLY

Transcription

1 INSTRUCTION MANUAL SC-CX910 VACUUM CLEANER HOUSEHOLD USE ONLY

2 NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) / Extension Pipe/ Vacuum Power Adjustment Ring / Power Control / Cord Rewind Button / The pipe is adjustable according to the height of the user. (How to expand / contract the pipe) Adjust the length of the pipe while pushing the slider. Make sure that you hear a click sound. < > Caution Please do not place your hand on the expansion pipe slider during operation. Please do push the slider in when adjusting the length. Slider Pull The full vacuum power of the cleaner may be too strong in certain cases, for instance when vacuuming curtains and draperies. In these cases, turn the vacuum power adjustment ring (on the hose) to control the vacuum power. Match the hole in the ring with the hose hole to reduce the power. Connect the angled pipe Vacuum power adjustment ring Set the POWER CONTROL to + / MAX for maximum suction. In the position - / MIN the suction power is decreased. - / MIN + / MAX MAX MIN + - To pull the cord back into the unit, press the cord rewind button. Hold the plug when rewinding the cord so that the plug does not damage furniture, hands, the vacuum cleaner or the cord by hitting them. Holding the plug will make rewinding smoother. Cord rewind button Clamp button Angled pipe Insert securely by turning Cord and Plug / Pull out the cord and connect the wall outlet. Do not extend the cord from the unit beyond the red marker line. Slider Hose Button Floor Nozzle / T The two-way floor nozzle has lever with two positions. FLOOR FLOOR: For vacuuming wooden floors, linoleum or plastic covered floors. Pipe holder Put the round brush here when not in use. Air inlet Dust Compartment Switch / Start or stop vacuum cleaner by pushing on the switch. Attachments / Crevice tool / FLOOR Hose Stopper / For vacuuming edges and gaps. RUG RUG: For vacuuming rugs and carpets. Insert the hose stopper all the way up to the air inlet. To detach it, press button on the hose stopper and pull the hose toward you. Round brush / The head of the brush can rotate for vacuuming fragile or easily scratched items. RUG

3 DUST DISPOSAL / Turn the vacuum cleaner off, pull the hose out of the unit and empty out the dirt as follows: 1. Press the clamp button and take out the dust compartment. Empty the dust compartment when contents reach the MAX mark. 1. Clamp button Dust compartment MAX MAX MAX 2. In figure, push the slider, open the dust cover and empty the dust compartment. 2. Use the garbage bags to cover the dust cup to prevent dust splash when you empty the compartment. Slider 3. Clean the dust compartment then reattach the vacuum cleaner. 3. Dust compartment cover

4 CLEAR THE DUST COMPARTMENT / Remove the dust compartment and empty dust compartment as follows. 1. As the arrow shown, turn the duster knod several times and waste in dust compartment will drop out. Duster Knod In figure, push the duster holder and take the pre-filter and main filer. 2. Duster holder Pre-Filter 3. Clean the pre-filter and main filter with water. Allow each parts to dry completely after cleaning. 3. Do not attempt to dry with a hair dryer or by placing in a clothes dryer. Hot air may cause the filters to warp. Don't need to wash after use each time. Pre-Filter Main filter 4. Insert the main filter into the pre-filter as shown Align the ribs of the main filter to match the shape of the hole in the dust compartment and press firmly to insert. 5. Hole Ribs

5 A FEW PRECAUTIONS 1. Operating without the dust compartment in place will allow dust to enter the motor and could damage the vacuum cleaner. 2. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolor the plastic parts of the unit. 3. Keep the vacuum cleaner free of insecticides. Do not wipe with benzene, thinner, petrol or other oils which might cause discoloration or cracking. To clean the body and hose, dampen a cloth with a mild detergent and wipe clean. 4. Blocking the suction inlet or allowing the dust to clog the hose will decrease the efficiency of the motor. 5. Be sure not to push the clamp button while carrying the vacuum cleaner. 6. Never try to vacuum the following objects. They may damage the unit or cause a fire. * Wet things, mud, soil, and fluids * Burning cigarettes * Needles and razor blades * Inflammable materials such as gasoline and thinner * Construction waste. 8. Please do not hold the hose to lift the vacuum cleaner and sway or move it, otherwise, it will be caused the damage for human body or vacuum cleaner. 9. Pull out the plug from the power source after use. Grasp the plug-not the cord-when pulling out the plug. Pulling on the cord may lead to short circuiting. 10. Long and continuous use causes the exhaust air and the body of the vacuum cleaner to become warm. This, however, does not denote malfunction. 11.When vacuuming places that are very dusty, and also when vacuuming regularly, empty the dust compartment before it becomes completely filled. Frequent emptying lengthens the life of the motor and maintains strong suction power. 12.If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the manufacturer, in order to avoid a hazard. 13.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 14.Young children should be supervised to ensure that they do not play with the appliance.

6

7 REPLACING THE HEPA FILTER / HEPA Under normal usage, the HEPA Filter will require replacement once every one year; however, vacuuming large amounts of extremely fine dust, powder or similar material over a long period of time may decrease airflow performance through the filter. If this occurs, it may become necessary to replace the HEPA Filter more often. Only use genuine Sanyo replacement filters. 1. Open the filter cover. Filter cover Remove the HEPA Filter. 3. Insert a new HEPA Filter, close the filter cover. HEPA Filter HEPA 2. HEPA 3. HEPA Please take the filter cover jut insert into the groove, then press the filter cover. Groove Be sure the HEPA Filter is facing the right direction. Jut To assure the best results, we recommend cleaning the filters once every one (1) year, depending on usage. CLEANER OF FILTER / Filter Take out the filter and cleaned by water. Filter Never insert the filter into the vacuum cleaner unless it is completely dry. CAUTION / Please do not use the vacuum cleaner without properly fixing the filter, otherwise, it may cause the motor to smoke, even burn into fire since the filter is part of functional components.

8 HOW TO USE THE HOSE STAND / The vacuum cleaner with the floor nozzle, wands and hose can be stored while still connected. Insert the wand holder into the wandholder hole. Wand holder Do not carry the vacuum cleaner while it is in the storage position. (Injury or damage may result if the hose or extonsion pipe becomes unattached.) Wand-holder hole CARE AND MAINTENANCE If you have a problem with your vacuum cleaner, consult the handy guide below. If the vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo Service Center. 9BF-D-P E/CHN 0