ASPT Series. Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons. Contents. Product Features

Size: px

Start display at page:

Download "ASPT Series. Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons. Contents. Product Features"

Clinton McCarthy
5 years ago
Views:

Series Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV ½ to Tons Contents Air Handler Nomenclature... Heater Kit Nomenclature... Product Specifications... Dimensions.

1 Series Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV ½ to Tons Contents Air Handler Nomenclature... Heater Kit Nomenclature... Product Specifications... Dimensions... Airflow Data... 6 Heat Kit Data... Wiring Diagram... Accessories... Product Features Internal factory-installed thermal expansion valves for cooling and heat pump applications Direct drive, multi-speed ECM blower motor All-aluminum evaporator coil Coil mounting track for quick repositioning Optimized for use with R-0A refrigerant Cabinet air leakage less than.0% at.0 inch HO when tested in accordance with ASHRAE standard Cabinet air leakage less than.% at 0. inch HO when tested in accordance with ASHRAE standard kw kw electric heater kits Horizontal or vertical configuration capabilities Rigid SmartFrame cabinet depth for easier attic access DecaBDE-free thermoplastic drain pan with secondary drain connections Screw-less sides and back helps to reduce condensation when installed in humid locations Foil-faced insulation covers the internal casing to reduce cabinet condensation Galvanized, leather grain-embossed finish Glue-less cabinet insulation retention Tool-less filter access AHRI certified; E listed * Complete warranty details available from your local dealer or at To receive the 0-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Québec. SS-G / Supersedes /

2 Nomenclature A S P T C AA,6 0, Brand Engineering * A - Single- Piece Air Handler Major/ Minor Revisions Unit Application C - Ceiling Mount PSC Motor R - Multi- Position PSC Motor S - Multi- Position EEM Motor W - Wall Mount PSC Motor Cabinet Finish U - Unpainted P - Painted N - Uncased *Not used for inventory management Refrigerant Compatability = R- 0A Electrical - 0/0 V, Phase, 60 Hz Nominal Width B - ½ Wide C - Wide D - ½ Wide Expansion Device F - Flowrator Nominal Capacity Range T - Expansion Valve = Tons = ½ Tons 0 = ½ Tons = Tons 6 = Tons 60 = Tons 6 = Tons HKS X 0 X A AA Unit Type Major & Minor Revisions HKS - AH Heater Kit Phase Circuit Breaker A VAC / Ø D VAC / Ø X - - No circuit breaker B VAC / Ø E VAC / Ø C - - Circuit Breaker C - - 0/0 VAC / Ø F - - 0/0 VAC / Ø G VAC / Ø kw kw - -. kw Cabinet Size (MAX) kw - -.kw w/0f limit C - - C Cabinet kW kw w/0f limit D - - D Cabinet kW kw X - - All Cabinet Sizes kw SS-G

3 Product Specifications B* B* B* C* C* C* D* D* 6D* Nominal Ratings Cooling (Btu/h),000,000 0,000 6,000,000 60,000,000,000 60,000 Blower Diameter ½" ½" ½" 0⅝" 0⅝" 0⅝" 0⅝" ¹⁵ ₁₆" ¹⁵ ₁₆" Width 6" 6" 6" " 0⅝" 0⅝" 0⅝" 0⅝" 0⅝" Coil Connections Liquid ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" Suction ¾" ⅞" ⅞" ⅞" ⅞" ⅞" ⅞" ⅞" ⅞" Coil Drain Connect (FPT) ¾" ¾" ¾" ¾" ¾" ¾" ¾" ¾" ¾" Electrical Data Voltage 0 / 0 0 / 0 0 / 0 0 / 0 0 / 0 0 / 0 0 / 0 0 / 0 0 / 0 Minimum Circuit Ampacity. /.. /..6 /.6.6 /.6.6 /.6. /..6 /.6.6 /.6.6 /.6 Max. Overcurrent Device (Amps) / / / / / / / / / Minimum VAC Maximum VAC Blower Motor Full Load Amps (A) Horsepower (HP) ¾ ¾ ¾ ¾ ¾ ¾ Ship Weight (Lbs.) *Airflow static Note: Assumes dry coil; SCFM correction for wet coil = % (0V / 0V) SS-G

4 Dimensions.0" (. cm).6" (. cm)." (.6 cm) ".0" (. cm)." (. cm)." (. cm)." (. cm)." (. cm)." DRAIN PORT DETAIL." (.0 cm) C B." (.0 cm)." (. cm)." (.6 cm)." (.0 cm)." (.0 cm) PLASTIC EAKER COVER." (.6 cm) LOGO LOCATION." (.cm) SUCTION TUBE LIQUID LINE A G INLET TUBE SEE DRAIN PORT DETAIL H E D." (. cm) F INLET (FRONT VIEW)." (. cm) " (. cm)." (. cm) INLET (RIGHT SIDE VIEW)." (.0 cm) Model A" B" C" D" E" F" G" H" B* 6⅜ ½ ¼ /6 ⅛ ⅝ B* /6 6⅜ ½ /6 0½ /6 ⅛ ⅝ B* /6 6⅜ ½ /6 0½ /6 ⅛ ⅝ C* /6 ⅞ /6 ⅝ /6 0 /6 6⅞ C* /6 ⅞ /6 ⅝ /6 0 /6 6⅞ C* /6 ⅞ /6 ⅝ /6 0 /6 6⅞ D* /6 /6 ½ ½ /6 /6 ⅝ 6⅞ D* /6 ½ 6⅛ ⅞ /6 ⅝ ⅛ 6D /6 ½ 6⅛ ⅞ /6 ⅝ ⅛ SS-G

5 Dimensions (Cont.) Model A" B" C" D" E" F" G" H" 6D /6 ½ 6⅛ ⅞ /6 ⅝ ⅛ SS-G

6 Airflow Data Model BAA BAA BAA CAA CAA DAA DAA CAA 6DAA Speed Tap Static Pressure (in w.c) ,,0,00,,,0,0,0, , ,0,6,0,0,,0,,,0, ,0,0,06,0 0 0,0,00,60,0,0,00,00 0,,00,,0,0,0,,0,,0,,,0,,0,,0, ,,0,0, ,,0,,0,0,0,00 6 0,,0,,0,,,,0,0,6,,0,0,0,0,6,0, ,00,00, ,0,60,0,0, ,,0,6,0,,,0,0,0,,0,,00,60,0,,0,0,0, ,0,6,0,00, ,,0,0,0,,00,00 0 0,6,0,0,,,0,0,,0,0,60,6,0,0,0,,0,,,,0,0,6,00,0,0 0,0,,0,0,0,,,,0,60,600,0,,,0,60,0,,00,6,,60,6,0,0,6,0,,60,0,0,00,000,0,0,6,0,0,,,,0,0,00,060,,00,6,0,0,0,,00,0,60,6,6,,,0,0,0,0,0,,0,60,60,,,0,0,0,,,00,60,0,0,0,0,,,0,0,,60,0,00,00,,6,6,,,,00,60,,0,,,0,,60,6,,00,,0,00,0,000,0,,0,0,0,0,6,0,,6,0,00,00 Notes The chart is for information only. For satisfactory operation, external static pressure must not exceed value shown on rating plate. Use the CFM adjustment factors of. for horizontal left,. for horizontal right &.6 for downflow orientations. Assumes dry coil with filter in place. All models are shipped from the factory with the speed tap set on T. Assumes dry coil; SCFM correction for wet coil = % All models are shipped from the factory with the speed tap set on T. 6 SS-G

7 Heat Kit Data Model Circuit Circuit Single-Point Kit Amps MCA¹ MOP² Amps MCA¹ MOP² MCA¹ MOP² BAA 0/0./. / HKS*0XC* 0./. / 0/ HKS*0XC*./0.0 / 0/ HKS*06XC*.6/.0 / / HKS*0XC*./. / / HKS*0XC*.6/0.0 /6 0/ BAA 0/0./. / HKS*0XC* 0./. / 0/ HKS*0XC*./0 / 0/ HKS*06XC*./ / / HKS*0XC*./. / / HKS*0XC*./0 /6 0/ HKS**#*./0 /6 0/60 /0 / / / 0/0 BAA 0/0.6/.6 / HKS*0XC* 0./. / 0/ HKS*0XC*./0 / 0/ HKS*06XC*./ / / HKS*0XC*./. / / HKS*0XC*./0 /6 0/ HKS**#*./0 /6 0/60./0 / / / 0/0 CAA 0/0.6/.6 / HKS*0XC* 0./. / 0/ HKS*0XC*./0 / 0/ HKS*06XC*./ / / HKS*0XC*./. / / HKS*0XC*./0 /6 0/ HKS**#*./0 /6 0/60./0 / / / 0/0 HKSCC*#*./0 /6 0/60./0 /0 /0 /06 00/0 HKSC*XF* 0/0.6/.6 / 0/.6 / 0/ CAA 0/0.6/.6 / HKS*0XC* 0./. / 0/ HKS*0XC*./0 / 0/ HKS*06XC*./ / / HKS*0XC*./. / / HKS*0XC*./0 /6 0/ HKS**#*./0 /6 0/60./0 / / / 0/0 HKSCC*#*./0 /6 0/60./0 /0 /0 /06 00/0 HKSC*XF* 0/0.6/.6 / 0/.6 / 0/ ¹ Minimum Circuit Ampacity (Heater Amps + Motor Amps) X. ² Maximum Overcurrent Protection =. X Motor Amps + Heater Amps ^ Circuit : Single-phase for Air Handlers Circuit : Three-phase for HKR Heater Kits * Revision level that may or may not be designated C = Circuit Breaker Option --- indicates Not Required Heating kw Correction Factor Supply Voltage Correction Factor Multiply the 0-volt heating capacity by correction factors. SS-G

8 Heat Kit Data (cont.) Model Circuit Circuit Single-Point Kit Amps MCA¹ MOP² Amps MCA¹ MOP² MCA¹ MOP² CAA 0.0/.0.0./. / HKS*0XC* 0./. / / HKS*0XC*./0 0/ 0/ HKS*06XC*./ / / HKS*0XC*./. /0 / HKS*0XC*./0 / 60/ HKS**#*./0 / 60/60./0 / / / 0/0 HKSCC*#*./0 / 60/60./0 /0 /0 /0 00/0 HKSC*XF* 0.0/0.0./. / 0/.6 / 0/ DAA 0/0.6/.6 / HKS*0XC* 0./. / 0/ HKS*0XC*./0 / 0/ HKS*06XC*./ / / HKS*0XC*./. / / HKS*0XC*./0 /6 0/ HKS**#*./0 /6 0/60./0 / / / 0/0 HKSC0D#C*./0 /6 0/60./0 /0 /0 /06 00/0 HKSC*XF* 0/0.6/.6 / 0/.6 / 0/ HKS*0XF* 0/0.6/.6 /./. / 0/ DAA 0/0.6/.6 / HKS*0XC* 0./. / / HKS*0XC*./0 0./ / HKS*06XC*./ 6/0 0/ HKS*0XC*./. /0. / HKS*0XC*./0 / 60/ HKSC*#*./0 / 60/60./0.0 / / / 0/0 HKSC0D#*./0 / 60/60./0.0 /0 /0 /0 00/0 HKS*XF* 0/0.6/.6 / 0/.6 / 0/ HKS*0XF* 0/0.6/.6 /./. / 0/ HKSCDC* /60 / 0/0 /0 /0 /0 / /0 6DAA 0/0.6/.6 / HKS*0XC* 0./. / / HKS*0XC*./0 0./ / HKS*06XC*./ 6/0 0/ HKS*0XC*./. /0. / HKS*0XC*./0 / 60/ HKSC*#*./0 / 60/60./0.0 / / / 0/0 HKSC0D#*./0 / 60/60./0.0 /0 /0 /0 00/0 HKS*XF* 0/0.6/.6 / 0/.6 / 0/ HKS*0XF* 0/0.6/.6 /./. / 0/ HKSCDC* /60 / 0/0 /0 /0 /0 / /0 ¹ Minimum Circuit Ampacity (Heater Amps + Motor Amps) X. ² Maximum Overcurrent Protection =. X Motor Amps + Heater Amps ^ Circuit : Single-phase for Air Handlers Circuit : Three-phase for HKR Heater Kits * Revision level that may or may not be designated C = Circuit Breaker Option --- indicates Not Required Heating kw Correction Factor Supply Voltage Correction Factor Multiply the 0-volt heating capacity by correction factors. SS-G

9 R HTR HTR HTR R M M HTR HTR HTR M M R R HTR HTR HTR HTR M M R M M6 M M R 6 ONE () ELEMENT ROWS TWO () ELEMENT ROWS THREE () ELEMENT ROWS FOUR () ELEMENT ROWS NOTE: EN INSTALLING HEATER KIT, ENSURE SPEED TAP DOES NOT EXCEED MINIMUM OWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER/HEATER KIT COMBINATION ON THIS UNIT'S S&R PLATE. AFTER INSTALLING OPTIONAL HEAT KIT, MARK A "X" IN THE BOX PROVIDED ABOVE.MARK ACCOING TO NUMBER OF HEATER ELEMENT ROWS INSTALLED. NO MARK INDICATES NO HEAT KIT INSTALLED. PLM 0/0 VOLTS EM LGN PLM WIRING CODE FACTORY WIRING HIGH VOLTAGE LOW VOLTAGE FIELD WIRING HIGH VOLTAGE LOW VOLTAGE FUSE HOLDER (OPTIONAL) NOTES: TR V 6 P L M SEE NOTE B R C G WW Y Y O DH A CR EM C COMPONENT CODE CR CONTROL RELAY EM EVAPORATOR MOTOR FUSE LINK HTR HEAT ELEMENTS PLM COLOR CODE ACK RED YELLOW UE EEN RPLE OWN ITE FEMALE PLUG CONNECTOR MALE PLUG CONNECTOR R RELAY TB TERMINAL BOA TR TRANSFORMER THERMAL LIMIT COPPER POWER SUPPLY (USE RATING PLATE) USE MIN. C FIELD WIRE IF REPLACEMENT OF THE ORIGINAL WIRES SUPPLIED WITH THIS ASSEMY IS NECESSARY, USE WIRE THAT CONFORMS TO THE NATIONAL ELECTRIC CODE. ) RED WIRES TO BE ON TRANSFORMER TERMINAL "" FOR 0 VOLTS AND ON TERMINAL "" FOR 0 VOLTS. ) SEE COMPLETE WIRING DIAAMS IN INSTALLATION INSTRUCTIONS FOR PROPER LOW VOLTAGE WIRING CONNECTIONS. ) CONFIRM SPEED TAP SELECTION IS APPROPRIATE FOR APPLICATION. IF SPEED TAP NEEDS TO BE CHANGED, CONNECT RPLE WIRE FROM TERMINAL OF CR RELAY TO APPROPRIATE TAP AT TB ) OWN AND ITE WIRES ARE USED FOR HEAT KITS ONLY. ) FUSE: A, 0V, AG CARTRIDGE FUSE. 00A0006-B Wiring is subject to change. Always refer to the wiring diagram on the Warning unit for the most up-to-date wiring. High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death C USE COPPER WIRE EQUIPMENT OUND PLM G SEE NOTE R C G W W Y Y O DH 6 0 TR 6 or CR or or FUSE HOLDER (OPTIONAL) OR EM C L G N Air Handler Wiring Diagram CR SEE NOTE SEE NOTE ALTERNATE HEAT RELAY A B V ALTERNATE HEAT RELAY NOTE: The five element, kw heater kit is not shown above. SS-G

10 Five-Element Heater Kit Wiring Diagram HTR COMPONENT CODE COLOR CODE HTR HTR HTR HTR M M6 M M M M 0 M PC R PC = PIN CONNECTOR HTR = HEATER ELEMENT = THERMAL LMT RS = RELAY/SEQUENCER TB = TERMINAL OCK CB = CIRCUIT EAKER CC = CONTACTOR = FUSE LINK EM = EVAPORATOR MOTOR EBTDR = ELEC. OWER TIME DELAY RC = RUN CAPACITOR TR = TRANSFORMER SR = STRAIN RELIEF WIRING CODE: HIGH VOLTAGE LOW VOLTAGE = ACK = UE = OWN = EEN OR = ORANGE PK = PINK = RPLE = RED = ITE = YELLOW R R 6 NOTE: EN INSTALLING HEATER KIT, ENSURE SPEED TAP MUST EXCEED OR EQUAL THE MINIMUM OWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER / HEATER KIT COMBINATION ON THIS UNIT'S SERIAL PLATE. AFTER INSTALLING OPTIONAL HEAT KIT, MARK AN "X" IN THE PROVIDED BELOW. NO MARK INDICATES NO HEAT KIT INSTALLED. FIVE () ELEMENT ROWS CB CB CB NOTE:- THIS LABEL MUST BE ATTACHED ON THE AIRHANDLER IN A PROMINENT LOCATION CB L L 00M00-A Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring. Warning High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. 0 SS-G

11 Three-Phase Heater Kit Wiring Diagram NOTE: EN INSTALLING HEATER KIT, ENSURE SPEED TAP MUST EXCEED OR EQUAL THE MINIMUM OWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER/HEATER KIT COMBINATION ON THIS UNIT'S SERIAL PLATE. AFTER INSTALLING OPTIONAL HEAT KIT, MARK AN "X" IN THE PROVIDED BELOW. NO MARK INDICATES NO HEAT KIT INSTALLED. PC TB CIRCUIT PH 0-0V HTR TR HTR L GND L CIRCUIT PH. 0-0V CC R T T T HTR RS M M 6 PK EBTDR NO K XFMR-R XFMR-C COM K C NC SPEEDUP SR RC EM NOTE:- THIS LABEL MUST BE ATTACHED ON THE AIRHANDLER IN A PROMINENT LOCATION PK RC AR POWER SUPPLY (CIRCUIT ) TR EM VOLT 0/0 VOLTS LOW HIGH C NC NO EBTDR COM EBTDR PC 6 W W W HKR POWER SUPPLY (CIRCUIT ) L T T T HTR HTR M HTR M CC RS HEATER CONTROL COMPONENT CODE HTR HEAT ELEMENT EM EVAPORATOR MOTOR EBTDR ELEC. OWER TIME DELAY RELAY RS RELAY/SEQUENCER RC RUN CAPACITOR THERMAL LIMIT TR TRANSFORMER TB TERMINAL OCK CC CONTACTOR PC -PIN CONNECTOR SR STRAIN RELIEF FUSE LINK CB CIRCUIT EAKER WIRING CODE HIGH VOLTAGE LOW VOLTAGE COLOR CODE ACK UE OWN EEN OR ORANGE PK PINK RPLE RED ITE YELLOW 00M00-A Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring. Warning High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. SS-G

12 Accessories Downflow Insulation Kit DFK-B DFK-C DFK-D B** 0C** D** 6C** C** C** D** 60D** 6D** Filters Chassis Part # Size B ALFH60E 6.0 x 0.0 C ALFH0E. x 0.0 D ALFH0E.0 x 0.0 Goodman Manufacturing Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. 0 Goodman Manufacturing Company, L.P. Houston, Texas Printed in the USA. SS-G

ASPT Series. Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons. Contents. Product Features

ASPT Series. Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons. Contents. Product Features Series Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV ½ to Tons Contents Air Handler Nomenclature... Heater Kit Nomenclature... Product Specifications... Dimensions... Airflow Data...