Worthington D-1100 vertical in-line pumps
|
|
- Poppy Thompson
- 5 years ago
- Views:
Transcription
1 New CENTRIFUGAL PUMPS Page 1 FEATURES D-1100 Worthington D-1100 vertical in-line pumps Sizes 1 to 60 hp, 800 gpm, 600 ft. 20E A standard in-line pump offering advanced design features for process and general pumping. WORTH I NGTON Standard Pump Marketing Dept., East Orange, N. J. WORTHINGTON
2 Page 2 CENTRIFUGAL PUMPS New D-1100 FEATURES Features and Options of In-Line design offer efficiency and economy Worthington, a name synonymous with excellence in modern pump design and engineering, offers the D-1100 vertical in-line pumps. The application advantages of the D-1100 vertical in-line pump will provide the solution to many of the problems facing industry today. Built to rigid specifications, all pumps are fitted with stainless steel internal parts; closed, scalloped impeller; wear-resistant shaft sleeve; and moneysaving, optional inducer. These construction highlights combined with rugged standardized JMV extension and JPV extension motors produce an efficient and economical package that's hard to beat. 20E In-line mounting offers many money-saving features and advantages. Simplified plant layout because of reduced space requirements and in-line mounting Easy, economical installation No concrete foundation or grouting needed Rotating assembly and motor can be removed without disturbing the piping Eliminates alignment costs and problems Pump inspection and maintenance can be accomplished at pump site saving time and money In addition to these advantages, the optional inducer is also offered on the D-1100 vertical in-line pumps. The inducer lowers required NPSH of a given pump over the normal operating range. This affords the opportunities of lower inlet pressures, better tank arrangements, and higher suction lifts. It will allow selection of pumps at higher speeds thereby enabling selection of a less costly pump. Should NPSH problems occur after startup the inducer may be added without disturbing the pump piping system or basic pump configuration. 20E WORTHINGTON Litho'd II.S..1.
3 New CENTRIFUGAL PUMPS Page 3 FEATURES D-1100 Stainless Steel fitted for reliable performance The Worthington D-1100 vertical in-line pumps offer flexibility and durability in construction design and materials, depending on the specific application requirements. Pumps are available in ductile iron, 316 stainless steel or construction. All D-1100 vertical in-line pumps have stainless steel internal parts to provide maximum performance under severe operating conditions. The shaft sleeve, the impeller and the impeller mounting screw and washer are all made of stainless steel to prevent corrosion and extend wear life. The standard shaft sleeve construction eliminates the necessity of replacing the entire motor shaft, should the surface under the seal or packing begin to wear. The closed, scalloped impeller, the optimum selection for most pump applications, retains its high efficiency longer than open impeller designs. It also provides: The impeller is held securely in place by a positive lock washer and impeller screw, and is keyed to the shaft for best possible transmission of torque. All these stainless steel "standards" mean greater savings and service to the customer, through superior hydraulics, interchangeability, and unexcelled modularity. 20E Inherent axial hydraulic balance resulting in longer seal and bearing life. Low NPSH requirements No clearance adustment necessary 20,20290 Standard Pump Marketing Dept., East Orange, N. J. WORTHINGTON /
4 Page 4 D-1100 CENTRIFUGAL PUMPS FEATURES New Choice of Motor Design for application flexibility standardized for economy and availability To assure maximum flexibility, availability and economy, Worthington's D-1100 vertical in-line pumps are being offered with two motor design standards. The NEMA "C" face standard motor, designed for use on vertical in-line pumps, offers the best availability and economy. This motor has single row ball bearings which are of adequate size to handle normal pump loads. The alternate motor design is the ANSI* standard "C" face motor, specifically designed for vertical in-line pumps. This motor includes double row ball bearings to minimize shaft deflection and end play, an extra large diameter shaft, and TEFC construction. Depending on the application, explosion proof motors are available. Both of these motors are equipped with drip cover and lifting eye bolts or lugs. The D-1130 pump utilizes a NEMA JM shaft extension motor. This shaft extension is for use with a mechanical seal. The D-1131 and D-1132 pump models utilize the NEMA JP shaft extension motor and can be furnished with either the NEMA standard motor or the ANSI vertical in-line standard motor design. This shaft extension is for use with convertible box (D-1131) or mechanical seal cover (D-1132). Standard motors mean greater availability and economy; both on its initial application and in any subsequent field requirements which might arise. These motors are produced by most major motor manufacturers and in many cases are readily available as a stock item. 'Proposed ANSI B standard for vertical in -line pumps 20E WORTHINGTON L,ihnd tn 11.S..1.
5 New CENTRIFUGAL PUMPS FEATURES Page 5 D-1100 Model D-1130 with JM shaft extension Standard Pump Marketing Dept., East Orange, N. J. WORTHINGTON
6 Page 6 CENTRIFUGAL PUMPS New D-1100 FEATURES Models D-1131 and D-1132 with JP shaft extension Two piece packing 4 a Stuffing box covet'. Alto, seating flexibility.(fhstptng or mechanic-5,stuftmo boy, i5cret con (in and out pra -v:derfl. shafing hox conli 'riandertic,r l p i. WORTHINGTON Litho'd (1.S.A
7 .., I New CENTRIFUGAL PUMPS Page 7 FEATURES D-1100 D-1100 Provides extensive coverage to meet your exact needs This thoroughly engineered modular pump line provides superior hydraulics and better coverage across the board, as the "flag chart" below shows. You'll find more and better selections at any design point. And that means whatever your application even if it falls at the top or bottom of the chart where efficiency is traditon- ally hard to come by you can select a pump to reduce operating costs. Each pump in the line (ranging up to 60 hp, capacities up to 800 gpm, heads up to 600 ft.) is designed for optimum performance with greatest reliability and lowest cost sf.-:,. -,_... 7,-., e,x tz, NIN iming I --v x,n --- I mffilems.mileamenis 1111WW r*. /,...4 -A- 'Y t'.,.- )(2 -t. k , CI Pr ii.- - 4,. 4, , i7011 )k-,1;zm'ar _,e..... *._ V, -V *,0,: --,' CAPACITY.50C. i:j US 1,Fio /15, rcr, r7c _,,,,t, IIMMIEEEMILIIIIIIEL*C 6r EIMMiktaNlek, MiliMMEIMMENIV) 1-111liallEr BatrAINIMILIMIC. - PLIIINNIIMIllik minfalrfallellp \ ' a., Fr 3`- " -,:o,,..,t, re,-, 5uu tut, 11.5,U U5 ufriol i6o '14R CAPACITY Standard Pump Marketing Dept., East Orange, N. J. WORTHINGTON
8 Page 8 D-1100 CENTRIFUGAL PUMPS FEATURES New Dimensions Pump Dimensions D-1130/1131/1132 Pump Size Suction Size Discharge Size X Y SD T DP D-1130 DP D-1131/ x 11/2 x /2 7% 77/ % 81/4 3 x 11/2 x /2 61/2 81/ /2 81/4 3 x 2 x ~ 81/2 2 x 11/2 x8 2 11/2 83/4 81/ ,/i x 11/2 x /2 8~ 10 1/ / x 2 x /2 81/2 4 x 3 x ~ 111/ ~ 8% 3 x 11/2 x /2 8% 10 1/ /83 81/2 3 x 2x % 10% % 83/4 4 x 3 x /2 121/ /14 8' V16 6 x 4x /2 14 1/ % 9% 3 x 11/2 x /2 11 1/e 12% /s 3 x 2 x /4 121/ ,1A4 4 x 3 x % Motor Dimensions* D-1130/1131/1132 Frame Size JMV or JPV JMV JPV AG 0 AG o % Vio 12% s 9'/I6 137s 9Y % /2 111/ % 10M / /14 12%4 19% 131/ '/16 10/ /14 131/ ,/ /4 14% '/I /4 14% / % 163/ / /s 1644 *Both standard and ANSI type. WORTHINGTON Lilho'd 0n U.S.A.
9 New CENTRIFUGAL PUMPS Page 9 FEATURES D-1100 Technical Data Materials of Construction Part Ductile Iron Casing Casing Wear Ring Casing Gasket Casing Cap Screws Impeller Impeller Screw Impeller Screw Washer Shaft Sleeve Adapter Adapter/St. Box Ring Mechanics! Seal/St. Box Cover Motor Shaft Packing Gland Studs & Nuts Ductile Iron Durabla Steel 416 SS Cast Iron (1) (2) Ductile Iron (1) Steel Lead Asbestos Steel Split Gland None Durabla Cast Iron Steel Blue Asbestos Split Gland None Durabla Cast Iron Steel Blue Asbestos Quench Gland , Mechanical Seal Type 21 BP-171 Type 9 QP-1C1 Type 9 QP-1C1 Optional Construction Casing Support Inducer Shaft Sleeve Casing Gasket Packing Quench Gland Steel 17% Chr. or Teflon, Steel Teflon (1) Adapter and mechanical seal cover on pumps are integral and are cast iron. (2) Adapter ring on pumps is cast iron. Steel Teflon Stuffing Box Data D-1131 Shaft and Shaft Sleeve Dimensions D-1130, D-1131, and D Depth O.D. Gland Bore Packing No. of of Stud Size Rings Box Sleeve Dia JPV % 5/i6 x VI6 5 % JPV 21/ /4 % x Vs 5 1/2 Pump Model Motor Frame JMV JMV SHAFT DIAMETER 0.0. At Impeller 7/8 11/4 Under Sleeve 1 1 3/8 of Sleeve 1% 1% and JPV JPV 1/2 11/4 1 1~ 1% 1 3/4 Standard Pump Marketing Dept., East Orange, N. J. WORTHINGTON
10 Page 10 CENTRIFUGAL PUMPS New D-1100 FEATURES Nationwide distribution assures availability and economy of pumps, parts and service An extensive network of franchised Worthington pump distributors, located in every major trading area in the country, is your assurance that there is, in fact, a Worthington representative near you for prompt, local service. Our distributors representatives are trained specialists in pumping equipment. They can offer expert assistance on pump application, selection, installation, operation, and maintenance. And Worthington distributors carry inventories of pumps and parts for immediate reaction to your needs. They are also backed up by Worthington's Distribution Centers. If the distributor doesn't have a less frequently used model or size in stock, he can get it from a Distribution Center quickly. Your Worthington distributor is factory trained. He can give you pump know-how promptly and conveniently. You can locate the Worthington distributor in your area by consulting the Yellow Pages of your local telephone directory. 20E Worthington Standard Pump Corp. 14 Fourth Avenue East Orange, New Jersey B1 A subsidiary of Worthington Pump International, Inc. WORTHINGTON WORTHINGTON Lithdd
11
12
13
14
15
16
17
18
19
Full-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
More informationDean Pump High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationSERIES 1600 Quality Design Features Assure Long, Trouble-Free Service
Vortex End Suction SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Food Processing Solids Waste Water Treatment Pollution Control Slurries Industrial Process
More informationGH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general
More informationDS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
More informationHorizontal Split Case Pumps Type U
Horizontal Split Case Pumps Type U 7.1 7.2 Stage U Type Pumps Features: Axially Split Case Design Range from 20M 3 /Hr to 600M 3 /Hr Two Stage Pump Single Suction Twin Volute Casing Design Closed type
More information3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet
3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction
More informationLN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.
LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal
More informationMODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
More informationDNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More information380 Series Multi-Stage Centrifugal Pumps
380 Series Multi-Stage Centrifugal Pumps Flows to: 2,500 GPM Heads to: 2100 Feet Temperatures to: 500+ F TDH - Feet 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in
More information380 Series Multi-Stage Centrifugal Pumps
380 Series Multi-Stage Centrifugal Pumps Flows to: 4,800 GPM Heads to: 2100 Feet Temperatures to: 500 F TDH - Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in
More informationDomestic Pump Series VCMD TM Combination Vacuum & Boiler Feed Unit
Custom engineered units to maintain optimum boiler levels and system vacuum requirements Four styles to choose from to minimize floor space requirements Multi-jet vacuum pumps for quiet, dependable and
More informationCombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 199 and ISO 88 / EN 88 (DIN 46) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal pumps
More informationWorthington CNG process pumps.
Worthington CNG process pumps. Capacity to 5,000 gpm; heads to 475 feet. A proven and reliable pump for corrosive services in chemical, pulp and paper and general industry. Longer lasting, easy to maintain
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationMODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS
MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and
More informationCombiChem Centrifugal pumps. according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 5199 and ISO 2858 / EN 22858 (DIN 225) CombiChem No limits to reliability! CombiChem is Johnson Pump s solution for liquid transport in the chemical industry.
More informationGoulds Trash Hog. Self-Priming Solids Handling Pumps
Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures
More information1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide
1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide Installation Location! The pump should be located as close as possible to the liquid source so that the suction line can be as short and direct
More informationB. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationWorthington D-834. vertical inline cast iron pumps
Worthington D-834 vertical inline cast iron pumps D834 Sales Features Dry Rabbet Fit Between Casing and Adapter. Precision machined surfaces between casing and adapter are sealed from pumping liquid, preventing
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y In-Line Pumps IIL / IVP / IVP-CC For more than 0 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. ASME/ANSI B73.1 Chemical Process Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide with innovation
More informationCentrifugal Pumps acc. to EN / ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to EN 22858 / ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump acc. to EN 22858 / ISO 2858 is designed for handling liquids in the chemical and petrochemical
More informationETP Series - Self Priming Pumps
ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are
More informationTYPE VL/VLS VERTICAL INLINE PUMPS
PACO VL/VLS TYPE VL/VLS VERTICAL INLINE PUMPS Close or Split Coupled EXPERIENCE WHERE IT COUNTS Nothing speaks volumes more than the expertise of a company and their ability to continually provide high-quality,
More informationCPO N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. ASME/ANSI B73.1 Chemical Process Pump. Springer Pumps, LLC
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Tel: 866-777-66 Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide
More informationSeries 4302 & FILE NO: 43d.12 DATE: June 1, 2004 SUPERSEDES: 43d.12 DATE: July 15, dualarm Vertical In-Line Pumps
Series 0 & FILE NO: d. DATE: June, 00 SUPERSEDES: d. DATE: July, 00 dualarm Vertical In-Line Pumps dualarm Smart pumps for the commercial HVAC market Vertical In-Line pump, the best design for HVAC systems,
More informationA. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.
SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationGoulds Large Capacity, Single Stage, Double Suction Pump
Goulds 3498 Large Capacity, Single Stage, Double Suction Pump 3498 Double Suction Pumps Designed for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services Capacities to 8,00 m 3 /h
More informationTYPE VSM/VSMS VERTICAL SPACE MISER PUMPS
PACO VSM/VSMS TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS Close and Split Coupled VERTICAL SPACE MISER Type VSM (Close Coupled) Type VSMS (Split Coupled) SMALL FOOTPRINT FOR TIGHT SPACES > Vertically mounted
More informationD. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMultistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR
Multistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR General DICKOW-pumps of series HZ/HZA are single- or multistage centrifugal pumps with shaft sealing. Application HZ/HZA-pumps are applied
More informationSERIES ES BASE MOUNTED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual
More informationWayne State University WSU Project No Chatsworth Tower Apts. Misc. Bldg. Upgrades DSD Project No
SECTION 213113 - ELECTRIC-DRIVE, CENTRIFUGAL FIRE PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationPhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.
More informationMARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
More informationFLANGE-MOUNT CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications
More informationCentrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump, type NCL, is designed for handling liquids in the chemical and petrochemical industry, in refineries,
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services Horizontal Split Case For more than 6 years the name Ruhrpumpen
More informationDUPLEX CONDENSATE TANK SYSTEM
DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM
More informationdualarm Vertical In-Line Pumps
Series 430 & 438 dualarm Vertical In-Line Pumps FILE NO: 43d.1 DATE: Jan. 0, 010 SUPERSEDES: 43d.1 DATE: Sept., 008 Series 430 & 438 Smart pumps for the commercial HVAC market. Armstrong Vertical In-Line
More informationCombiBloc Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
More informationGoulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps
Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
More informationSECTION FIRE PUMP AND CONTROLS
SECTION 15320 FIRE PUMP AND CONTROLS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Fire pump, jockey pump, and controls including necessary accessories as shown in Construction Documents, specified
More informationCAST IRON IMPELLER B4JRMBH. TYPE B SINGLE STAGE CENTRIFUGAL PUMP Bearing Frame Mount TABLE I
Page 90. Date January, 004 Supersedes //95 B4JRMBH Packing Construction 3 9 3 8 Volute Impeller B/M No. Rotation Case Impeller Diameter B3 CW H03843 L059 3.50 B33 CCW H03848 L0594 3.50 8 00 095 3 See Supplement
More informationIndustrial. Solutions brands you trust. Product Overview
Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications
More informationVertical Heavy Duty Pumps
Vertical Heavy Duty 7550 Series Vertical End Suction 7600 Series Top Pull Out Enclosed Column Centrifugal Vortex Non Clog Slurry Cantilever TM Vertical? For all process services and applications, the Gusher
More informationTYPE LF/LC/LCV END SUCTION PUMPS
PACO LF/LC/LCV TYPE LF/LC/LCV END SUCTION PUMPS Close Coupled and Frame Mounted END SUCTION PUMPS Type LF (Frame Mounted) Type LC (Close Coupled) Type LCV (Vertically Mounted Close Coupled) Grundfos CBS
More information.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.
Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780
More informationCommercial, Residential & Institutional Pumps, Tanks, & Accessories
Taco International Commercial, Residential & Institutional Pumps, Tanks, & Accessories Taco Catalog # : 300-6.0 Supersedes: 300-3.5 9/11/06 Effective Date: 03/21/07 Printed in USA Pumps FI Frame Mounted
More informationNew END SUCTION CENTRIFUGAL PUMPS Page 9 October 1975
New END SUCTION CENTRIFUGAL PUMPS 2004-3 Page 9 GENERAL LIMITATIONS Max. Temperature The maximum temperature of the liquid pumped by S.E.S.C. pumps depends upon the conduction of heat along the shaft to
More information1900 Series In-Line Pump
Water Circulation Pumps & Circulators 1900 Series In-Line Pump HYDRONIC COMPONENTS & SYSTEMS Taco Catalog #: 300-1.4 Supersedes: 300-1.4 Dated: 06/15/95 Effective Date: 03/15/05 Printed in USA 2. Features
More informationGoulds LP3400 Series Low Pulse Fan Pumps
Goulds LP3400 Series Low Pulse Fan Pumps Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds Standard Design Features for Reliable Low Pulse Fa Headbox F RENEWABLE
More informationGoulds 3600 Between-Bearing, Axially-Split, Multistage Pumps
Goulds Pumps Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority
More information5. CONDENSATE PUMPS/UNITS
INDEX Condensate Systems/Pumps GENERAL INFORMATION BURKS PARTS I&O MANUALS. CONDENSATE PUMPS/UNITS PUMP TYPES: GV GV6 USA: (937) 778-8947 Canada: (90) 47-6223 International: (937) 61-398 A 7/1 Condensate
More information4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction
4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Water and Other.00
More informationBlockpumps. Vogel Series LSB. Lenntech. Tel Fax
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: m Capacity up to 450m
More informationDLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:
DLKF A. General: Provide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide
More informationA. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMCV - MCH - MCHZ Multistage pumps
MCV - MCH - MCHZ Multistage pumps You can put pressure on them! We offer you a range of reliable high-pressure multistage pumps. It includes a series of horizontal pumps, MCH and a series of vertical pumps,
More informationSERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene
More informationSAM TURBO INDUSTRY LIMITED
INSTRUCTIONS ON INSTALLATION, OPERATION AND MAINTENANACE FOR SAM TURBO PUMP TYPE MD SAM TURBO INDUSTRY LIMITED NEELAMBUR, COIMBATORE-641 014. INDIA PH: 0422-3058899(50 LINES), FAX: 3058000, E-MAIL: mktg@sampumps.com,
More informationSERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene
More informationM-Series Vertical Turbine Pumps. BULLETIN 3A.1 June 2003
M-Series Vertical Turbine Pumps BULLETIN 3A.1 June 03 A-C Vertical Turbine Pumps Flexibility by Design: Four Pump Models, One Common Bowl Assembly Model MVT-FF Driver Model MVC Driver The four different
More informationJ SERIES. Technical Specifications. Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps. Features
Steam Traps Condensate Boiler Feed Valves Strainers Pumps J SERIES Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps Technical Specifications The Sterlco J Series Centrifugal Pumps are designed
More informationSeries SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec
WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30
More informationCORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS
CORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS MINE DEWATERING high efficiency SETTING THE STANDARD Cornell s Redi-Prime pumps are designed and engineered for the most rugged and demanding
More informationPumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22.
Pumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22. SERIES Z22 - WHEN GOOD IS NOT ENOUGH. Since we delivered our first process pumps back in the 1870 s, our goal has been to optimize
More informationSelfpriming Centrifugal Pumps. Type HZS/HZSA
Selfpriming Centrifugal Pumps Type HZS/HZSA General The selfpriming multistage DICKOW-centrifugal pump is designed for handling hydrocarbons and other volatile liquids. The HZS-type is used in tank farms,
More informationHPDM Volute Casing Pumps Axially Split
HPDM Volute Casing Pumps Axially Split Sulzer Pumps - working with you from design to operation Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing with a deep
More informationEBARA. Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU
EBARA Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU water wastewater EBARA International Corporation Standard Pump Division S ubmersible Non-clog Pump Model DLFU DVFU DDLFU Features Watertight
More informationGoulds Trash Hog. Self-Priming Solids Handling Pump
Goulds Trash Hog Self-Priming Solids Handling Pump Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6,000 GPM (1,363 m3/h) Heads to 140 feet (43 m) Temperatures
More informationHoffman Specialty Pump Products
Condensate Units Boiler Feed Units Vacuum Heating Units Hoffman Specialty Pump Products S-0692C INDEX Condensate Return Units Series WC Series WCS Series SCC Boiler Feed Units Stock Watchman Condensate
More informationKEENER GRINDER PUMPS
KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual
More informationKGP(X) Grinder Pumps HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve.
Grinder Pumps KGP(X) 7.5-15HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) (PENDING) The KEEN PUMP KGP(X) series centrifugal grinder pumps are designed for municipal, commercial
More informationCondensate Pumps Jones Boulevard Limerick Airport Business Center Pottstown PA Tel:
www.watsonmcdaniel.com 428 Jones Boulevard Limerick Airport Business Center Pottstown PA 19464 Tel: 610-495-5131 129 Return Introduction Return System Shown below is a simplified view of a steam system
More informationSpecifications Information and Repair Parts Manual 316A-95, 316B-95, 393A-95, 393B A-95 thru 394D-95, 399A-95
Specifications Information and Repair Parts Manual 316A-95, 316B-95, 393A-95, 393B-95 394A-95 thru 394D-95, 399A-95 Please read and save this Repair Parts Manual. Read this manual and the General Operating
More informationKUBOTA Double suction volute pump
PUMPS CATALOGUE KUBOTA Double suction volute pump DV-L type J series KUBOTA Corporation DOMESTIC OFFICES AND OVERSEAS OFFICE E-Mail:pump@kubota.co.jp http://www.kubota.co.jp/english KUBOTA Double suction
More informationExperience In Motion. WXH and WXM Utility-Grade Multistage Ring Section Pumps
Experience In Motion WXH and WXM Utility-Grade Multistage Ring Section Pumps High reliability and performance in rapid-cycling applications The WXH and WXM multistage ring section pumps are specifically
More informationMAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE
MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE Seal-less Design Price Pump magnetically driven, seal-less pumps provide a leak-proof
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP. Vertical Turbine Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP Vertical Turbine Pump For more than 60 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping technology
More informationSIHI multi Modular multistage pumps
SIHI multi Modular multistage pumps STERLING FLUID SYSTEMS GROUP Backed by its 70 years of application and manufacturing knowledge in the field of ringsection multistage pumps, Sterling Fluid Systems has
More informationFAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS.
FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS History and Development Since the early part of this century, Fairbanks Nijhuis Pump has set industry standards in innovative
More informationREF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3.
4.4 SUPPLY PUMPAK ASSEMBLY NOTE: This section applies only to systems, which include a supply pumpak. Only the H6, XA, and XC series systems contain a supply pumpak. If your system is a single zone, H6
More informationVSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.
Brochure# 228E 122011 TYPE VSA SEWAGE PUMP Capacities to 100 gpm, Heads to 120, Horsepower range 3/ thru 0, 3 thru discharge, 1750 and 1150 operation. HIGHLIGHTS Wet-Pit Installations Pumps Suspend From
More informationSubmersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges
Submersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges TM High Performance in Wastewater Pumping HOMA submersible water and wastewater pumps operate worldwide in numerous domestic, municipal
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y HVN. Double Suction, Heavy Duty API 610 Process Pump (BB2)
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y HVN For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology The Ruhrpumpen range
More information