Product Code: Cordless Patio Weed Sweeper INSTRUCTION MANUAL. Please retain for reference.

Size: px
Start display at page:

Download "Product Code: Cordless Patio Weed Sweeper INSTRUCTION MANUAL. Please retain for reference."

Transcription

1 Product Code: Cordless Patio Weed Sweeper INSTRUCTION MANUAL Please retain for reference. 1

2 Table of Contents: Safety Instructions 2 Product Description 3 Safety Symbols 3 Warnings 4-5 Parts breakdown 6 Intended use 7 Technical Data 7 Assembly instructions 8-10 Battery Charging 11 Maintenance 12 Disposal and recycling 12 Many thanks for purchasing your Bergman cordless patio weed sweeper. In order to ensure that you get the very best use out of your new item, please read the following instructions before use. Please keep these instructions in a safe place for future reference. Safety Instructions. WARNING! When using any electrical appliance, basic safety precautions should always be followed. Before using the Bergman cordless patio weed sweeper for the first time, please be certain to read these instructions carefully. Check that the voltage indicated on the rating plate corresponds with that of the local supply before connecting the appliance to the power supply. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning safe use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. The Bergman cordless patio weed sweeper is intended for domestic use only. It should not be used for commercial applications. This appliance contains no user serviceable parts. All repairs should only be carried out by a qualified person. Improper repairs may place the user at risk of harm, and will invalidate any guarantee. Do not operate the appliance after a malfunction or if it has been dropped or damaged in any way. Do not submerge the appliance in water or any other liquids. Do not handle the appliance or plug with damp or wet hands. Keep the appliance and battery out of reach of children under 8 years old. No liability can be taken for any damage or harm that occurs in the event of improper use or incorrect handling. 2

3 Product Description (fig.1) 1 ON/OFF Switch 2 Switch Lock 3 Additional Handle Lock 4 Control-pole Lock 5 Control-Pole plug 6 Wheel 7 Guard 8 Brush 2 Safety Notes (fig.2) 1. Denotes risk of personal injury or damage to the tool. 2. Read instruction manual. 3. Wear safety goggles and wear hearing protection. 4. Do not use the appliance in rain. 5. Keep all other person away from the danger zone. 6. Beware of catapulted objects. 7. Switch off the tool and pull out the power plug before caring out any cleaning or maintenance work. 8. Rotating parts. Keep your hands and feet away from the brush. 3

4 WARNING Read all safety warnings and all instructions. Failure to follow the Warnings and instructions may result in electric shock, fire and/or serious injury. Work area safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective appliance. Always wear eye protection. Protective appliance such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collectioncan reduces dust-related hazards. Power tool use and care Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Store idle power tools out of the reach of children and do not allow person sun familiar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with the so instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. The suitable temperature in the storage 5-30C 4

5 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. ADDITIONAL SAFETY INSTRUCTIONS FOR BRUSH Brushes should not be mounted on machines having a speed in excess of the maximum permissible brush speed. Damaged brushes should not be used. Rust discoloration or other signs of chemical or mechanical changes of the fill material may cause premature failure. Brushes should be stored in suitable racks, containers or boxes in such a manner that they are protected against the effects of: o High humidity, heat, water or other liquids with which might cause damage to the brush; o Exposure to acids, or fumes from acids, which might induce deterioration; o Any temperature low enough to cause condensation on the brush when removed from o storage to an area of higher temperature; o Distortion of any of the brush components. ADDITIONAL SAFETY INSTRUCTIONS FOR PACKING The battery must be removed from the appliance before it is scrapped. The appliance must be disconnected from the supply mains when removing the battery. The battery is to be disposed of safely. Items supplied (fig.3) Open the packaging and take out the appliance with care. Check to see if all items are supplied. Inspect the appliance and accessories for transport damage. If possible, please keep the packaging until the end of the guarantee period. IMPORTANT The appliance and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating! 5

6 1 Handle Part 2 Motor part 3 Battery 4 Guard 5 2x ST3.5*13 Screws 6 Nylon Brush 7 Wire Brush 8 Wheel 9 Roller Nut 10 Additional Handle 11 Knob 12 M6 Nut 13 Spanner 14 Crowbar 15 Charger Intended use The appliance is designed for clean away the weeds and dirt in the cracks between paving stones. The appliance may be used only for the tasks it is designed to handle. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind resulting from such misuse. Please note that our appliance has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the appliance is used in commercial, trade or industrial businesses or for equivalent purposes. Technical data Model Battery voltage Brush speed Brush size Net weight Battery type Battery capability Charging time Operate time(no load) Charging unit N0C-100/10.8A 10.8 V 1200 rpm Φ100 mm 1490 g Lithium-ion 1.5 Ah Approx.3-5 hours 50 minutes V~/ Hz 6

7 The noise and the value of the vibrations emitted by the handle were determined in accordance with: EN ISO 3744: 2010; EN ISO 11201:2010; EN :1992 L pa sound pressure level 68 db(a) L WA sound power level 88 db (A) K uncertainty 6 db At the operator s ear LpA 78 db(a) K uncertainty 3 db Vibration a h 1.6m/S ² K uncertainty 1.5 m/s ² Warning The vibration value changes according to the area of application of the electric appliance and may exceed the specified value in exceptional circumstances. Reduce noise generation and vibration to a minimum! Use only appliance that is in perfect condition. Maintain and clean the appliance regularly. Adapt your way of working to the appliance. Do not overload the appliance. Have the appliance checked if necessary. Switch off the appliance when not in use. Wear gloves. Assembling and adjusting appliance Warning: Please read the instruction manual carefully and follow these instructions before assembling or adjusting the Bergman cordless patio weed sweeper. Please put on protective gloves before assembling or adjust the appliance. Connecting the handle and motor part (fig.4) (fig.5) Insert the lead into the hole on the motor part, and then insert the hand part into the hole. (fig.4) Push the hand part to the suitable location. (fig.5) 7

8 Mounting the wheel (fig.6) (fig.7) Insert the axle of the wheel into the mounting hole. (fig.6) Push the wheel to the suitable location. (fig.7) Mounting the guard (fig.8) (fig.9) Mount the guard to the appliance as. (fig.8) Fastening the guard with two ST3.5*13 screws. (fig.9) 8

9 Mounting the brush (fig.10) (fig.11) Mounting the brush on the roller, then wring the roller nut on the roller. (fig.10) Insert the crowbar into the hole on the roller and tighten the roller nut while holding the crowbar. (fig.11) In order to remove the brush, proceed in reverse order Warning Always remove the battery before inserting or removing a brush 9

10 Mounting the additional handle (fig.12) Fit the addition handle(1) into the pedestal(2) and adjusting the angle of the addition handle, tighten the addition handle with knob and M6 nut from both sides of the addition handle Adjusting the height (fig.13) Warning Do not adjust the height of the appliance when the motor is running. Doing so increases the risk of serious harm. Loosen the knob (1), With one hand grasp the front part (2) of the handle, and with the other grasp the upper aluminium pipe (3). Catch the telescopic pole plug (2) with one hand, and catch the telescopic top tube (3) with the other hand, adjust to suitable position. Then tighten the knob (1) according to the red arrow direction as below picture showed. 10

11 Charging the battery (fig.14) The charger included contains two parts: the adaptor (a/b) and the charger pedestal (c). Do not use other type of charger. This charger is only suitable for this type of battery. Please observe the specified voltage, the mains voltage must same as that marked on the rating plate of the battery charger: V~50-60 Hz Warning When the battery has run out of charge, the appliance must not be used until the battery is re-charged in full. Please note that the battery will need to be charged for at least 5 hours before first use. Remove the battery from the appliance when placing in storage, and to ensure that the battery is full of electricity, if long time no use, the battery should be charged once every 3 months. Charging Instructions: Check that your mains voltage is the same as that marked on the rating plate of the battery charger. Insert the power plug of the adaptor into the mains socket outlet. The LED (b) on the adapter will turn green. Insert the battery pack into the charger pedestal (c). The LED will turn red to show that the battery is being charged. After the completion of charging, the LED will turn green. Attention: Do not store that battery in the charging pedestal. Keep the battery and charger away from water or any other liquids 11

12 Reference for use The machine is equipped with a nylon brush and a metal brush. Wire brush is suitable for hard surface and stubborn weed. Nylon brush is used for soft plants and some weeds that is not suitable for wire brush. Important If you are in doubt about the area that you are to clean, please test the unit on a small, inconspicuous area first. Check the brush plate regularly for signs of wear. Replace brushes when badly worn. Always use both hands when operating this appliance. Best results will be gained when using this item at walking speed. Maintenance Warning Before performing any maintenance or adjustments to this appliance, ensure that it is switched off and the battery removed. Keep the appliance away from water and other liquids Always clean the appliance after use. Using a clean cloth to wipe the machine or blow away the dust on the surface of the machine with a dryer. Use a damp cloth to clean the machine regularly. Do not use detergent or other solvent, these can cause damage to plastic parts The crossed out Wheelie Bin logo is used to highlight electrical products that should not be disposed of with normal household waste. Scotts Ltd has contributed to the funding of an alternative network of UK recycling facilities. Please visit to find where you re nearest recycling point is and recycle this product at the end of its life. Made in China for 12

13 Scotts Ltd Declare that the Bergman cordless patio weed sweeper Product Code: Confirms with the following EEC Directives; their supporting Statutory Instruments and relevant Standards, where applicable, as follows, The Machinery Directive 2006/42/EC The EMC Directive: 2014/30/EU EN :2012/A11:2014 EN ISO 12100:2010 EN :1997 EN 62233:2008 AfPS GS 2014:01 PAK EN :2006/A2:2011 EN :1997/A2:2008 Measured sound power level: 86dB (A) Guaranteed sound power level: 89dB (A) Signed: MS Victoria Laws Group Merchandise & Buying Director Scotts Ltd. Dated: 20 th April

GENERAL POWER TOOL SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save

More information

DUST EXTRACTOR INSTRUCTION MANUAL. 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.

DUST EXTRACTOR INSTRUCTION MANUAL. 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2. KNOW YOUR PRODUCT DUST EXTRACTOR 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.5M SUCTION HOSE INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions.

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Power Mixer UT04 0078 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model UT04 No load speed (min - )

More information

Blower UB1100 UB1101 INSTRUCTION MANUAL

Blower UB1100 UB1101 INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL Blower UB00 UB0 004752 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Safety Warnings. Work area safety. Electrical Safety. Personal Safety

Safety Warnings. Work area safety. Electrical Safety. Personal Safety Table of Contents Safety Warnings...2 Work area safety...2 Electrical Safety...2 Personal Safety...2 Power tool use and care...3 Service...3 Hammer safety warnings...3 Product Layout...4 Product Description...4

More information

Drywall Screwdriver INSTRUCTION MANUAL

Drywall Screwdriver INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver 68 00603 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

ATD /8 Electric Drill

ATD /8 Electric Drill ATD-10538 3/8 Electric Drill Tool specifications: Rated Voltage: (V) 120 Rated Frequency: (Hz) 60 Rated current: (A) 3.3 No-load Speed: (RPM) 0-2700 Speed Selection: Yes Right/Left Rotation: Yes Chuck

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Demolition Hammer HM0810TA DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Demolition Hammer HM0810TA DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Demolition Hammer HM080TA 00079 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HM080TA Blows per

More information

Drywall Screwdriver R INSTRUCTION MANUAL

Drywall Screwdriver R INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver 6823 6824 6825 6825R 002604 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS

More information

RCD1802. ORIGINAL INSTRUCTIONS Compact Drill Driver

RCD1802. ORIGINAL INSTRUCTIONS Compact Drill Driver RCD1802 ORGNAL NSTRUCTONS Compact Drill Driver mportant! t is essential that you read the instructions in this manual before operating this machine. Subject to technical modifi cations. Safety GENERAL

More information

CORDLESS HAND VACUUM INSTRUCTION MANUAL

CORDLESS HAND VACUUM INSTRUCTION MANUAL WHAT S IN THE BOX Cordless Vacuum CORDLESS HAND VACUUM INSTRUCTION MANUAL Brush Tool SPECIFICATIONS Input: Air Flow: Dust Canister Capacity: Weight: ozito.com.au 18V 8 L/sec 540ml 0.85kg Crevice Tool Mounting

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Belt Sander DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Belt Sander DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Belt Sander 990 99 00336 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 990 99 Belt size 76 mm x

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL Random orbit sander WX655 2 3 1 9 4 5 8 6 7 A1 A2 10B 10A B C1 C2 D 11 E F E F G H1 H2 H3 H4 H4 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all

More information

ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX. Electric Air Pump. 3 x Inflation Adaptors

ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX. Electric Air Pump. 3 x Inflation Adaptors WHAT S IN THE BOX ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 220-240V ~50Hz Power: 130W Max. Current: 0.62A Max. Pressure: 0.6PSI Flow Rate: 440L/Min Inflation Time: Under 2min (double

More information

Accessories. Safety Warnings. Table of Contents

Accessories. Safety Warnings. Table of Contents Table of Contents Accessories...1 Safety Warnings...1 Work Area...2 Electrical Safety...2 Personal Safety...2 Power Tool Use and Care...3 Service...3 Hammer Safety Warnings...3 Usage...4 Changing Tools...4

More information

SPECIFICATIONS MODEL NO. OZDE1015WA

SPECIFICATIONS MODEL NO. OZDE1015WA SPECIFICATIONS MODEL NO. OZDE1015WA Motor size: Input: No load speed: Exhaust connection: Hose length: Suction capacity: Dust collection drum: Noise level: Tool Weight: 1100W 230-240V ~ 50Hz 20,000 /min

More information

SAFETY AND OPERATING MANUAL. 450W/46cm HEDGE TRIMMER JM450PHT

SAFETY AND OPERATING MANUAL. 450W/46cm HEDGE TRIMMER JM450PHT SAFETY AND OPERATING MANUAL 450W/46cm HEDGE TRIMMER JM450PHT GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

More information

Manual. Belt Sander BSL 115/E. ProxxonTools.com

Manual. Belt Sander BSL 115/E. ProxxonTools.com ProxxonTools.com Belt Sander BSL 115/E Manual 3080767 Conforms to ANSI/UL 60745-1 ANSI/UL 60745-2-4 Certified to CAN/CSA-C22.2 No. 60745-1-04 CAN/CSA-C22.2 No. 60745-2-4-04 Fig. 1 Fig. 2 Fig. 3 Fig. 4

More information

GT110

GT110 2 3 4 1 5 6 7 www.blackanddecker.com.au www.blackanddecker.co.nz GT110 4 8 A C1 2 9 B C2 Intended use Your Black & Decker hedge trimmer has been designed for trimming hedges, shrubs and brambles. This

More information

ORIGINAL INSTRUCTIONS. 18V ONE + Cordless Pole Pruner. RPP1820Li15 OPP1820

ORIGINAL INSTRUCTIONS. 18V ONE + Cordless Pole Pruner. RPP1820Li15 OPP1820 ORIGINAL INSTRUCTIONS 8V ONE + Cordless Pole Pruner RPP80Li5 OPP80 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL Original instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in

More information

ELECTRIC CHARCOAL STARTER

ELECTRIC CHARCOAL STARTER WHAT S IN THE BOX ELECTRIC CHARCOAL STARTER 2000W INSTRUCTION MANUAL SPECIFICATIONS Power: 2000W Input: 230V~50Hz Temperature: 600 C Weight: 0.9kg ozito.com.au Electric Charcoal Starter CFS-2000 WARRANTY

More information

Instructions for Use. Electric Pole Hedge Trimmer Input Power Tooth gap of cutter blade 16mm

Instructions for Use. Electric Pole Hedge Trimmer Input Power Tooth gap of cutter blade 16mm Voltage/Frequency 230V-240V a.c./ 50Hz Input Power 450W Tooth gap of cutter blade 16mm Strokes 1,600/min Noise emission value LWA 100 db(a) Hand / arm vibration a vhw < 2.5 m /s2 Total Length 1.9m-2.5m

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5020 BO5021 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5020 BO5021 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Random Orbit Sander BO500 BO50 00377 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO500 BO50 Pad

More information

ORIGINAL INSTRUCTIONS Cordless Hedge Trimmer RBC36X26E RHT3626DR RBC36X26E RHT3600R

ORIGINAL INSTRUCTIONS Cordless Hedge Trimmer RBC36X26E RHT3626DR RBC36X26E RHT3600R ORIGINAL INSTRUCTIONS Cordless Hedge Trimmer RBC36X6E RHT366DR RBC36X6E RHT3600R Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the

More information

Electric Blower Watt OZBL1800WA. To view the full range visit: Operation Manual 2 Year Replacement Warranty

Electric Blower Watt OZBL1800WA. To view the full range visit:   Operation Manual 2 Year Replacement Warranty Electric Blower 1800 Watt Operation Manual 2 Year Replacement Warranty OZBL1800WA 0212 To view the full range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. OZBL1800WA Motor: Input: No load speed:

More information

Cable Drum Machine. Operation Manual 110ES SERIES. Cleans 1 1/4" to 3" lines up to 25'

Cable Drum Machine. Operation Manual 110ES SERIES. Cleans 1 1/4 to 3 lines up to 25' Cable Drum Machine Operation Manual 110ES SERIES Cleans 1 1/4" to 3" lines up to 25' Used For: Sinks, Showers &Tub Drains WARNING - Read All Instructions, When Using Electric Tools, Basic Safety Precautions

More information

WET & DRY VACUUM 1500W 30L WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au VWD-1530 WHAT S IN THE BOX

WET & DRY VACUUM 1500W 30L WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au VWD-1530 WHAT S IN THE BOX WHAT S IN THE BOX WET & DRY VACUUM 1500W 30L INSTRUCTION MANUAL SPECIFICATIONS Mains Voltage: Input Power: Suction Power Max.: Tank Capacity: IP Rating: Product weight: ozito.com.au 230 240V ~ 50Hz 1500W

More information

English (Original instructions) 3

English (Original instructions) 3 KC9006 AS600 English (Original instructions) 3 A B C D 2 Intended use Your Black & Decker screwdriver has been designed for screwdriving applications. This tool is intended for consumer use only. Safety

More information

CD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand

CD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand www.blackanddecker.com.au CD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand CD400A-XE 1 4 3 1 2 KA196-XE/KA196E-XE 5 1 KA273-XE 4 3 2 A 3 2 4 2 B 3 4 4 3 3 4 C D 4 3 E 2 6 7 8 5 G F 10 11 9 CD400A-XE

More information

English BT3600

English BT3600 www.blackanddecker.com 3 English BT3600 FIG. 1 FIG. 2 150mm BENCH GRINDER BT3600 GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric

More information

WET & DRY VACUUM 1250W 12L WARRANTY INSTRUCTION MANUAL SPECIFICATIONS VWD-1212 WHAT S IN THE BOX

WET & DRY VACUUM 1250W 12L WARRANTY INSTRUCTION MANUAL SPECIFICATIONS VWD-1212 WHAT S IN THE BOX WHAT S IN THE BOX WET & DRY VACUUM 1250W 12L INSTRUCTION MANUAL SPECIFICATIONS Input Power: 1250W Suction Power Max.: 140 mbar Air Flow: 27 l/s Tank Capacity: 12 l Hose Length: 1.5m Hose Diameter: 35mm

More information

2.5MM ELECTRIC NIBBLER

2.5MM ELECTRIC NIBBLER 596701 2.5MM ELECTRIC NIBBLER PLEASE STORE T GENERAL SAFETY RU WARNING! FAILURE TO FOLLOW ELECTRIC SHOCK, FI LISTED HERE REFERS BATTERY-OPERATED TOOLEX INDUSTRIAL 5 1 ) Work area a) Keep work area c b)

More information

ELECTRIC BODY SAW INSTRUCTIONS. Item #31660

ELECTRIC BODY SAW INSTRUCTIONS. Item #31660 ELECTRIC BODY SAW INSTRUCTIONS Item #31660 The EASTWOOD ELECTRIC BODY SAW is great for use on virtually all metals including steel, aluminum, brass and more. Cuts wood, fiberglass and other materials with

More information

ELECTRIC DRILL INSTRUCTIONS. Item #21285

ELECTRIC DRILL INSTRUCTIONS. Item #21285 ELECTRIC DRILL INSTRUCTIONS Item #21285 The EASTWOOD ELECTRIC DRILL is great for use on virtually all metals including steel, aluminum, brass and more. The powerful 6.3 Amp motor and 1/2 capacity chuck

More information

SAFETY AND OPERATING MANUAL 400W. 125mm RANDOM ORBITAL SANDER JM400ROS

SAFETY AND OPERATING MANUAL 400W. 125mm RANDOM ORBITAL SANDER JM400ROS SAFETY AND OPERATING MANUAL 400W 125mm RANDOM ORBITAL SANDER JM400ROS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions

More information

ELECTRIC TACKER Original instructions

ELECTRIC TACKER Original instructions ESN114 ESN530 ELECTRIC TACKER ELEKTRISCHER TACKER AGRAFEUSE ÉLECTRIQUE ELEKTRISCHE TACKER FISSATRICE ELETTRICA CLAVADORA ELÉCTRICA AGRAFADOR ELÉCTRICO ELEKTRISK HÄFTPISTOL ELEKTRISK HÆFTEPISTOL ELEKTRISK

More information

English... 5 Čeština Slovenčina Magyarul Polski Русский... 85

English... 5 Čeština Slovenčina Magyarul Polski Русский... 85 FDS 10150-A 2 English... 5 Čeština... 21 Slovenčina... 37 Magyarul... 53 Polski... 69 Русский... 85 1 FDS 10150-A 4 FDS 10150-A Contents 5 EN Screwdriver INSTRUCTION MANUAL Thank you for your purchase

More information

Mini-Rooter Operating Instructions

Mini-Rooter Operating Instructions Mini-Rooter Operating Instructions For 1-1/4 through 4 lines (30mm 100mm) Your Mini-Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.

More information

TECMAF HIGH FREQUENCY GRINDERS WARRANTY: 06 (SIX) MONTHS FROM THE DATE OF SHIPMENT

TECMAF HIGH FREQUENCY GRINDERS WARRANTY: 06 (SIX) MONTHS FROM THE DATE OF SHIPMENT SPECIFIC SAFETY RULES FOR POWER TOOLS Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term power tool in all of the warnings listed below refers

More information

INSTRUCTION MANUAL MODEL: 690E

INSTRUCTION MANUAL MODEL: 690E 1 INSTRUCTION MANUAL ALEKO Drywall Sander MODEL: 690E READ THROUGH CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE Visit our web site for more great products, parts and accessories: 2 3 4 5 6 Caution!

More information

Cordless Cut-Out Tool

Cordless Cut-Out Tool ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Cut-Out Tool DCO40 DCO80 04848 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DCO40 DCO80 Collet chuck capacity

More information

Qualcast 500W Electric Hedge Trimmer

Qualcast 500W Electric Hedge Trimmer Qualcast 500W Electric Hedge Trimmer Assembly Manual GHT500A1 After Sales Support UK/Ireland 0344 801 0979 Web WWW.ARGOS.CO.UK Important- Please read these instructions fully before starting assembly These

More information

TE 2 TE 2-M TE 2-S English

TE 2 TE 2-M TE 2-S English TE 2 TE 2-M TE 2-S English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling

More information

Cable Drum Machine Operational Manual CP1020

Cable Drum Machine Operational Manual CP1020 TOOLS FOR THE PROFESSIONAL PLUMBER TOOLS FOR THE PROFESSIONAL PLUMBER Cable Drum Machine Operational Manual CP1020 Used For: Sinks, Showers and Tub Drains Cleans 3/4" to 3" lines up to 25' (Not for roots)

More information

CD60RE CD60CRE CD70CRE AST2XC

CD60RE CD60CRE CD70CRE AST2XC 1 CD60RE CD60CRE CD70CRE AST2XC English (Original instructions) 4 2 A B C D E 3 Intended use Your Black & Decker inpact drill has been designed for drilling in wood, metal, plastics, and masonry as well

More information

PORTABLE HAND POWER THREADER 1/2-2

PORTABLE HAND POWER THREADER 1/2-2 PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or

More information

HEDGE TRIMMER. 550W 450mm WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTE-550 WHAT S IN THE BOX

HEDGE TRIMMER. 550W 450mm WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTE-550 WHAT S IN THE BOX WHAT S IN THE BOX HEDGE TRIMMER 550W 450mm INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Motor: 550W No Load Speed: 1,400/min Blade Length: 450mm Max. Cutting Capacity: 16mm Weight: 2.9kg ozito.com.au

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5040 BO5041 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5040 BO5041 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Random Orbit Sander BO5040 BO504 0074 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO5040 BO504

More information

User Manual Drywall Sander Model: BNR7231A

User Manual Drywall Sander Model: BNR7231A User Manual Drywall Sander Model: BNR7231A - Page 1- 1. PRODUCT DESCRIPTION The machine is designed for grinding drywalls, ceilings and walls of the inner and outer surfaces, clearing the floor residues,

More information

English (Original instructions) 5

English (Original instructions) 5 KA198 KA198GT English (Original instructions) 5 2 A B C D E F 3 G 4 Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended

More information

R18MT. ORIGINAL INSTRUCTIONS 18V Multi-tool

R18MT. ORIGINAL INSTRUCTIONS 18V Multi-tool R8MT ORIGINAL INSTRUCTIONS 8V Multi-tool Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.

More information

D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL

D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

HEDGE TRIMMER. 600W 550mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTER-600 WHAT S IN THE BOX. Hedge Trimmer. Blade Cover.

HEDGE TRIMMER. 600W 550mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTER-600 WHAT S IN THE BOX. Hedge Trimmer. Blade Cover. WHAT S IN THE BOX HEDGE TRIMMER 600W 550mm INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Motor: 600W No Load Speed: 1,400/min Blade Length: 550mm Max. Cutting Capacity: 20mm Weight: 3.15kg ozito.com.au

More information

Cordless Vacuum Cleaner

Cordless Vacuum Cleaner ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Vacuum Cleaner DVC40 DVC50 0 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DVC40 DVC50 Capacity Volume.0

More information

POWXG2042 EN 1 APPLICATION DESCRIPTION (FIG. 1 & 2) PACKAGE CONTENT LIST SYMBOLS GENERAL POWER TOOL SAFETY WARNINGS...

POWXG2042 EN 1 APPLICATION DESCRIPTION (FIG. 1 & 2) PACKAGE CONTENT LIST SYMBOLS GENERAL POWER TOOL SAFETY WARNINGS... 1 APPLICATION... 2 2 DESCRIPTION (FIG. 1 & 2)... 2 3 PACKAGE CONTENT LIST... 2 4 SYMBOLS... 3 5 GENERAL POWER TOOL SAFETY WARNINGS... 3 5.1 Work area... 3 5.2 Electrical safety... 3 5.3 Personal safety...

More information

English (Original instructions) 5

English (Original instructions) 5 KA88 English (Original instructions) 5 2 A B C D E F 3 G 4 Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer

More information

TE 2 TE 2-M TE 2-S. English Français Español Português

TE 2 TE 2-M TE 2-S. English Français Español Português TE 2 TE 2-M TE 2-S English Français Español Português en fr es pt 1 Printed: 15.12.2015 Doc-Nr: PUB / 5261122 / 000 / 00 2 3 4 5 Printed: 15.12.2015 Doc-Nr: PUB / 5261122 / 000 / 00 6 7 8 TE 2 TE 2-M TE

More information

BG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions

BG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions BG8SS 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This

More information

and trade dress used under license Keep this tool away from children. Ford Motor Company trademarks

and trade dress used under license Keep this tool away from children. Ford Motor Company trademarks Operation manual and security instructions inside the box. Use safety glasses. Keep this tool away from children. Ford Motor Company trademarks and trade dress used under license to Nine HKG, Ltd. fordmotorcompany.com

More information

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions)

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions) FME670 A B C D E F 2 (Original instructions) ENGLISH Intended use Your Stanley Fat Max heat gun has been designed for various heating applications such as paint stripping. This tool is intended for professional

More information

PORTABLE HAND POWER THREADER 1/2-2

PORTABLE HAND POWER THREADER 1/2-2 PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or

More information

WET & DRY VACUUM WARRANTY WHAT S IN THE BOX PXVWDS-1818 SPECIFICATIONS

WET & DRY VACUUM WARRANTY WHAT S IN THE BOX PXVWDS-1818 SPECIFICATIONS WHAT S IN THE BOX Cordless Wet & Dry Vacuum Air Hose, Extension Tubes & Adaptor WET & DRY VACUUM Crevice, Brush & Floor Tool INSTRUCTION MANUAL SPECIFICATIONS Voltage: Suction Power: Tank Capacity: Flow

More information

KA900E.

KA900E. www.blackanddecker.co.uk KA900E English (Original instructions) 6 2 3 4 5 Intended use Your Black & Decker Powerfile TM sander has been designed for sanding wood, metal, plastics and painted surfaces.

More information

TE 300-AVR. English Français Español Português

TE 300-AVR. English Français Español Português TE 300-AVR English Français Español Português en fr es pt 1 2 3 4 5 6 7 8 9 TE 300-AVR en Original operating instructions....................................... 1 fr Mode d'emploi original............................................

More information

EHG2000. ORIGINAL INSTRUCTIONS Heat Gun

EHG2000. ORIGINAL INSTRUCTIONS Heat Gun EHG2000 ORIGINAL INSTRUCTIONS Heat Gun Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety SAFETY RULES WARNING

More information

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG8370L

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG8370L BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG8370L PART NO: 6500532 OPERATION & MAINTENANCE INSTRUCTIONS LS0514 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder with light and

More information

M Class 110V 35L Wet & Dry Vacuum Cleaner

M Class 110V 35L Wet & Dry Vacuum Cleaner INSTRUCTIONS FOR M Class 110V 35L Wet & Dry Vacuum Cleaner Stock No.86685 Part No.WDV35LMC110V IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT.

More information

Micro-Rooter Operating Instructions

Micro-Rooter Operating Instructions Micro-Rooter Operating Instructions For 1-1/4 through 3 lines (30mm 100mm) Your Micro-Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.

More information

Wet & Dry Bench Grinder

Wet & Dry Bench Grinder Wet & Dry Bench Grinder 200/150mm Instruction Manual 3 Year Replacement Warranty OZWDBG250WA! warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions

More information

MULTI PURPOSE MIXER 1050W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DMM-080 WHAT S IN THE BOX. Multi-Purpose Mixer. Side Handle.

MULTI PURPOSE MIXER 1050W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DMM-080 WHAT S IN THE BOX. Multi-Purpose Mixer. Side Handle. WHAT S IN THE BOX MULTI PURPOSE MIXER 1050W INSTRUCTION MANUAL SPECIFICATIONS Motor: 1050W Input: 230-240V ~ 50Hz No Load Speed: 0-550/min Max. Mixing Capacity: 80L Mixing Paddle Length: 600mm Mixing Paddle

More information

Heat Gun 2000W. To view the full range visit: Instruction Manual 3 Year Replacement Warranty OZHG2000WAK

Heat Gun 2000W.   To view the full range visit: Instruction Manual 3 Year Replacement Warranty OZHG2000WAK Heat Gun 2000W Instruction Manual 3 Year Replacement Warranty OZHG2000WAK! WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG6250L

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG6250L BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG6250L PART NO: 6500524 OPERATION & MAINTENANCE INSTRUCTIONS LS0514 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder with light and

More information

English (Original instructions) 6

English (Original instructions) 6 KA902E English (Original instructions) 6 2 3 4 5 Intended use Your Black & Decker Powerfile TM sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for

More information

Leaf Blower Vac 91010

Leaf Blower Vac 91010 3 N 1 Leaf Blower Vac 91010 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

RSH2455G OPERATOR S MANUAL ELECTRIC QUIET CHIPPER SHREDDER

RSH2455G OPERATOR S MANUAL ELECTRIC QUIET CHIPPER SHREDDER RSH2455G ELECTRIC QUIET CHIPPER SHREDDER OPERATOR S MANUAL Important! It is essential that you read the instructions in this manual before mounting and operating this machine. Subject to technical modifications.

More information

BRUSHLESS STEEL DECK MOWER ORIGINAL INSTRUCTIONS

BRUSHLESS STEEL DECK MOWER ORIGINAL INSTRUCTIONS STANDARD EQUIPMENT Brushless Lawn Mower BRUSHLESS STEEL DECK MOWER ORIGINAL INSTRUCTIONS SPECIFICATIONS Voltage: Cutting Diameter: Cutting Heights: No Load Speed: Grass Catcher: Weight (Tool Only): ozito.com.au

More information

BG6UL. 6 Inch Bench Grinder Assembly & Operating Instructions

BG6UL. 6 Inch Bench Grinder Assembly & Operating Instructions BG6UL 6 Inch Bench Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information

More information

PS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

PS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. PS07214 4 1/2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

High-Velocity Floor Fan

High-Velocity Floor Fan High-Velocity Floor Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

SPECIFICATIONS MODEL NO. FBT-6300

SPECIFICATIONS MODEL NO. FBT-6300 ! 0214 SPECIFICATIONS MODEL NO. FBT-6300 Input: 230 240V ~ 50Hz Motor Size: 370W Motor Speed: 1440/min Drum Speed: 23-26/min Gross Drum Volume: 220 Litres (7.7 cu ft) Unmixed Dry Volume: 170 Litres (6

More information

Electric Blower Shredder Vac

Electric Blower Shredder Vac GB Subject to change Electric Blower Shredder Vac User s Guide After Sales Support Now you have purchased a product you can rest assured in the knowledge that as well as your 3 year parts and labour warranty

More information

ROTARY HAMMER DRILL KIT

ROTARY HAMMER DRILL KIT KNOW YOUR PRODUCT ROTARY HAMMER DRILL KIT 9 joules 1050w INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Electric Breaker HM1801 HM1810 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Electric Breaker HM1801 HM1810 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Electric Breaker HM80 HM80 00698 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HM80 HM80 Blows

More information

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions)

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions) KX1650 A 3 2 (Original instructions) ENGLISH Intended use Your Black & Decker heat gun has been designed for various heating applications such as paint stripping. This product is intended for consumer

More information

TE 1000-AVR. English. Printed: Doc-Nr: PUB / / 000 / 04

TE 1000-AVR. English. Printed: Doc-Nr: PUB / / 000 / 04 TE 1000-AVR English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and

More information

HEAT GUN OWNER S MANUAL

HEAT GUN OWNER S MANUAL HEAT GUN OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

GWC3600L

GWC3600L www.blackanddecker.com.au www.blackanddecker.co.nz GWC3600L A B C D E 2 F G H I J H K L 3 ENGLISH (Original instructions) Intended use Your BLACK+DECKER cordless sweeper/vac has been designed for clearing

More information

TE 3-M TE 3-C. English Français Español. Printed: Doc-Nr: PUB / / 000 / 01

TE 3-M TE 3-C. English Français Español. Printed: Doc-Nr: PUB / / 000 / 01 TE 3-M TE 3-C English Français Español en fr es Printed: 25.11.2015 Doc-Nr: PUB / 5245522 / 000 / 01 1 This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado

More information

Mechanical Crimping Tool JT-150 Instruction Manual

Mechanical Crimping Tool JT-150 Instruction Manual 500.630 Mechanical Crimping Tool JT-150 Instruction Manual Due to continuing improvements, actual product may differ slightly from the product described herein. General Safety Rules To work in safe conditions

More information

Stock No Part No.PT130SF IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT.

Stock No Part No.PT130SF IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT. STORM INSTRUCTIONS FOR 130W 230V Tri-Palm Sander Stock No.83645 Part No.PT130SF IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT. GENERAL INFORMATION

More information

WALLPAPER STEAMER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

WALLPAPER STEAMER. Model ASSEMBLY AND OPERATING INSTRUCTIONS WALLPAPER STEAMER Model 91098 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools.

More information

20-GALLON MOBILE PARTS WASHER OWNER S MANUAL

20-GALLON MOBILE PARTS WASHER OWNER S MANUAL 20-GALLON MOBILE PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in

More information

3.5-GALLON PARTS WASHER OWNER S MANUAL

3.5-GALLON PARTS WASHER OWNER S MANUAL 3.5-GALLON PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

22In. Oscillating Pedestal Fan. Owner s Manual

22In. Oscillating Pedestal Fan. Owner s Manual 22In. Oscillating Pedestal Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

150MM ELECTRIC EARTH BORER

150MM ELECTRIC EARTH BORER 150MM ELECTRIC EARTH BORER MODEL NO: CEA150 PART NO: 3400997 OPERATING & MAINTENANCE INSTRUCTIONS GC0915 INTRODUCTION Thank you for purchasing this CLARKE Electric Earth Borer designed for boring holes

More information

ORIGINAL INSTRUCTIONS. Lawn Mower RLM3640L RLM3600L

ORIGINAL INSTRUCTIONS. Lawn Mower RLM3640L RLM3600L ORIGINAL INSTRUCTIONS Lawn Mower RLM640L RLM600L Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL

More information

SILENT SHREDDER 2400W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au SSH-240 WHAT S IN THE BOX

SILENT SHREDDER 2400W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au SSH-240 WHAT S IN THE BOX WHAT S IN THE BOX Shredder Housing SILENT SHREDDER 2400W Support Legs (x2) INSTRUCTION MANUAL SPECIFICATIONS Motor: 2400W (S6 40%) Input: No Load Speed: Max. Cutting: Blades: 230V 240V ~ 50Hz 40/min Ø40mm

More information

Easy Rooter. Operating Instructions

Easy Rooter. Operating Instructions Easy Rooter Operating Instructions For 3" through 10" lines (75mm 250mm) Your Easy Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.

More information

Lawn Edger 1400W LWE To view the full range visit: Instruction Manual 2 Year Replacement Warranty

Lawn Edger 1400W LWE To view the full range visit:   Instruction Manual 2 Year Replacement Warranty Lawn Edger 1400W Instruction Manual 2 Year Replacement Warranty LWE-1400 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,

More information