Plant Growth Cabinets

Size: px
Start display at page:

Download "Plant Growth Cabinets"

Transcription

1 Plant Growth Cabinets MODEL: TPG-1260-TH-Co2 Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline Scientific ABN Ross Place. Wetherill Park. N.S.W Australia. P.O. Box 6862, Wetherill Park Delivery Centre, N.S.W Australia. Phone: (02) International: Fax: (02) International: sales@thermoline.com.au Web:

2 2 Operators Instructions for Thermoline Plant Growth Cabinet Model Number TPG-1260-TH-Co2. Please read this manual to familiarise yourself with the functions before operating the Plant Growth cabinet. Emergency Door Release. If locked inside the cabinet, undo the wing nut near the door latch and push hard on the door. Page 4 Page 5 Page 6 Page 7 Location Connection of Supplies Electrical Condensate Drain Water Supply Co2 Supply (Option) Refrigeration. Thermoline High Light Intensity Plant Growth Cabinet Theory of Operation Main growth Area Conditioning Area Theory of Operation Light Loft Area Controls Enclosure Sensor Housing Safety Controls and Interlocks Element Safety Thermostat Light Loft Safety Thermostat Humidifier Safety Thermostat Water Level Interlock Electrical Circuit Breakers Crankcase Pressure Regulator Fan Cycle Pressure Control

3 3 Page 8 Page 10 Page 15 Page 17 Page 18 Page 19 Page 22 Page 23 Page 24 Page 23 STAR-700 Operating Guidelines Safe Operating Value (SOV) STAR-700 Operating Guidelines Diurnal/Program Set-Up STAR-700 Operating Guidelines Start Diurnal/Program Cycles. STAR-700 Operating Guidelines Trend Screen STAR-700 Operating Guidelines Data Screen STAR-700 Operating Guidelines Security Screensaver. STAR-700 Operating Guidelines Calibration Screen. STAR-700 Operating Guidelines System Screen Passcodes Service Screen Diagnostics Screen STAR-700 Operating Guidelines Diagnostics Screen Contact Screen Routine Maintenance Adjustable Shelf Guidelines Temperature & Humidity Limits Electrical Schematic Refrigeration Schematic

4 4 Operating Instructions for Thermoline Plant Growth Cabinet Model Number TPG-1260-TH. Location. Locate the cabinet on a firm level surface, in a well-ventilated area. The base of the cabinet is fitted with castors to allow ease of movement. Find a level surface for the chamber to sit on. Then Adjust the Locking feet to fix the chamber in position. This will ensure that there is good drainage. Electrical. Connection of Supplies. The cabinet is fitted with a flexible lead and five-pin plug for power supply connection. The power supply required for model TPG-1260-TH is 415Volts + Neutral 10 Amps/Phase. Condensate Drain/Overflow. At the rear of the cabinet, on the control enclosure end, there is a 19mm diameter tube. This is the condensate/overflow drain, which takes water away from the inside floor of the cabinet and also the drain and overflow for the Humidifier Tank. Connect this to a suitable waste point. Water Supply. At the rear of the control enclosure there is a standard 12mm garden hose fitting provided for the connection of the water supply. It is labelled "Water In. The water supply should preferably be some sought of filtered supply; straight tap water has too many impurities that remain in the humidifier tank causing premature failure of the tank. The water supply can be mains pressure or gravity fed. (If using gravity feed supply, make sure that the water tank is above the height of the chamber). Co2 Supply (Option). At the rear of the Chamber is a 1/4 Barb fitting for the Co2 connection. Inlet pressure should be 1.25 bar (125kpa) +/-0.25 Bar. Connect 100% Co2 concentration. Do not use a premix Co2 concentration cylinders such as 10%, 20% or 50% Co2 mixed cylinders. Refrigeration. The refrigeration is located in the electrical enclosure on the floor. The only routine maintenance required is that the inlet air filter for the condenser be kept clean. This can be accessed from the wire grill panel at the front of the cabinet. Remove the wire grill panel and with a standard soft bristle brush dust off any dirt or grime.

5 5 Thermoline High Light Intensity Plant Growth Cabinets. The Thermoline High Light Intensity Plant Growth Chamber has been designed to provide a controlled environment of Temperature, Humidity and Lighting, to simulate growth conditions Theory of Operation. The plant growth chamber can be regarded as comprising of five main areas; these are as follows, Main growth area (workspace). Conditioning area. Light loft area. Control enclosure area. Sensor Housing Main growth area. Conditioned air (temperature and humidity controlled air) enters the growth area vertically, through a series of slots in the floor panels. The floor panels are made from stainless steel to prevent corrosion, and are fabricated in the shape of a hat section for strength. The floor can be removed, to allow access to the sub-floor area for cleaning. The inside of the growth area is mainly white for maximum light reflectivity. Conditioning area. Once the conditioned air has passed through the growth area, it returns to the conditioning area through the return fan area at the top of the Main Growth area. Within this area are the components that are used to control the temperature and humidity of the air, these are as follows, The Cooling Evaporator Coil. The De-Humidifying Evaporator Coil The Humidifier Inlet. The Circulating Fans. The Air Heating Elements. Air passes over each of the various components to be either heated or cooled, and to be either humidified or dehumidified. The air is then returned to the growth area by the circulating fans for the whole cycle to begin again. Two Axial fan wheels provide air circulation. These wheels are driven by internally mounted motors, which are inside the conditioning area. Air from the fans is forced into the sub-floor area this has the effect of pressurising the area below floor level, to enable the air to enter the growth area at an even rate.

6 6 Light loft area. This area is separated from the main growth area by a layer of glass. Air is drawn into the light loft area to help reduce the heat build up within the light area. The air is drawn through the light loft area, across the lamps, and is then exhausted out to atmosphere. Lighting is provided by five High Pressure Sodium lamps (5 x 400 watt and four incandescent lamps). Switching the lamps via the STAR-700 Toucscreen can vary lighting intensity; they are as follows, Incandescent. 4x600 watt Halogen Incandescent lamps. HID 1. 3x400 watt HPS lamps. (1 st, 3 rd and 5 th ) HID 2. 2x400 watt HID lamps. (2 nd and 4 th lamps) The lights can be easily changed, with access through the removable front panel. Do not attempt to remove the Lamps while they are illuminated. Allow the Lamps to cool prior to removing them, as the surface of the Lamp can become extremely hot, In excess of 250.0degC When replacing the lamps ensure the removable front cover is fitted back in place prior to operation of the cabinet. Lamps fitted are GE Lighting Lamps, Part Number LU/400-HO-T-40. As an alternative Metal Halide Lamps can be fitted. However they need to be a Metal Halide that can operate on High Pressure Sodium Equipment. The Osram HQI-T-400 is a suitable Lamp. Controls enclosure area. This area contains the following, Operators control panel. (Mounted on the front) Electrical control panel. Humidifier steam generator. Refrigeration compressor, pressure controls, solenoids, etc. Miscellaneous other controls (water solenoids, etc.) Sensor Housing. Inside the 'Main work space' you will notice a Stainless Steel box; this box contains the temperature sensor, humidity sensor and a small circulating fan. When the cabinet is running and trying to control the set temperature and humidity, it is very important that the 'Sensor Housing' is located on the shelf alongside the samples that are being processed. It is of major importance that the inlet and outlet airflow of the 'Sensor Housing' is not restricted in any way. If the airflow is impaired for any reason, you will experience erroneous results.

7 7 Safety Controls and Interlocks There are a number of safety controls fitted to Thermoline Plant Growth Chambers, some of which are available to the operator and others, which are factory preset, as follows. Element Safety Thermostat. (Not operator adjustable). This thermostat measures the air temperature adjacent to the air heating elements. If air-circulating fans fail or airflow is impaired by the placement of samples, this thermostat prevents the element from overheating. Humidifier Safety Thermostat (Not operator adjustable). This thermostat measures the temperature adjacent to the heating elements in the humidifier (steam generator). If there is an interruption to water supply (and level interlock fails), this thermostat switches off the heating elements and they remain switched off until it is manually reset. If tripped a red indicator on the 'Operator Control Panel is illuminated. Water Level Interlock. The humidifier tank is fitted with two float switches. The upper level float switch operates a solenoid valve in the water supply, to maintain a constant level in the humidifier supply tank. The lower level float switch is interlocked with the humidity control circuit, such that if the water level falls below this float switch, power to the heating elements is switched off. If the humidity function is turned on and the water level falls below the lower float switch, a red indicator (Humid Off) on the 'Operator Control Panel' is illuminated. Electrical Circuit Breakers. These circuit breakers protect the electrical system against major damage from electrical faults. If they are tripped for any reason, determine the cause and rectify the fault before resetting. Crankcase Pressure Regulator. (Not operator adjustable). This mechanical regulating device has two functions and are as follows, 1. It prevents the pressure of the gas returning to the compressor from rising above its stated tolerance. 2. It provides some degree of refrigeration capacity regulation to balance the heating and cooling systems. Fan Cycle Pressure Control. (Not operator adjustable) This pressure switch operates the fan on the refrigeration condenser, to maintain the refrigerant pressure when the surrounding ambient air temperature is appreciably lower than the internal chamber operating temperature.

8 8 Safe Operating Value (SOV). STAR-700 TOUCHSCREEN OPERATING GUIDELINES. On initial Power up the STAR-700 Touchscreen shows the Screen Saver page. See Below Image. On Initial power up cabinet controls the Safe Operating Value only. The Touchscreen is fitted with a Security Screensaver to stop unauthorised access to the controlling parameters. This Security Screensaver becomes active if the Touchscreen has not been touched for more than 5minutes or if power is cycled. To exit out of the Security Screensaver simply press the Press to Log In & Exit Screensaver Button. The User Access window will appear. To exit out of the Security Screensaver and enter into the Main Menu Screen use the following passcodes: User Number: 1 Passcodes: 1111 These passcode should only be given to Authorised Personnel. To enter the User Number and/or the Passcode simply press the Numeric Window and the Numeric Keyboard will be displayed. Simply enter the User Number and/or the Password and press enter. Once you have pressed enter press the screen anywhere above the Login Button and the Main Menu screen will appear. When in the Main Menu Screen you will notice that the indicator in the top right corner states that the Diurnal/Program Cycle is Off. The Values below the heading Safe Operating Value are the current set values and the controller will start to control these values. During Safe Operating Value control, the Lights can only be manually operated by using the drop down menu underneath the heading Lights (SOV). The Lights SOV is a manual operation of the Lights, in the ON mode they are continually on and in the OFF mode they are continually off. To operate the Lights on a Diurnal/Program Cycle the operator will need set up the Diurnal/Program Cycle. To change the Safe Operating Value simply touch the Operating Value box. A popup numeric keypad is displayed. Type in the new value and press enter. The cabinet will automatically control the new Safe Operating Value. The Safe Operating Value has been designed to be set by the operator to a safe condition that will not cause damage to any of the Research, Experimental and/or Plant Material within the cabinet, in the event of a power failure. If the controller is operating in Diurnal/Program Cycle mode and there is a power failure, on resumption of power the Diurnal/Program Cycle mode will stop and the cabinet will be controlled at the Safe Operating Value. Security Screensaver (SOV Mode)

9 9 Security Screensaver with User Access Window. Main Menu Screen (SOV Mode) Main Menu Screen with Pop-Up Numeric Keypad.

10 10 Program/Diurnal Set-Up. The STAR 700 has a 250 segment Programmer. The 250 segments are split between 25 Programs (10 Segments per program). The Program Set-Up is securely protected by means of a user name and password. By pressing the Thermoline Logo the Login Screen appears. The Username is 02 and the Password is Once the Password is entered the next touch of the screen needs to be the Program Set-Up button. If the screen is touch anywhere but the Program Set-Up button the password will be reset and will need to be re-entered. Once the Program Set-Up button has been pressed then the Program Set-Up screen is displayed. Main Screen with Login Screen showing Login Screen Diurnal/Program Set Up Screen. The above screen shows the Program set-up page. This consists of 25 programs having a total of 250segments (10segments per program). Program 1: Segments 1-10 Program 2: Segments Program 3: Segments Program 4: Segments (etc) Program 25: Segments

11 11 Each program can be set as an independent program or can be linked to create one large or multiple large programs. This is achieved by not using an End segment in a particular program. For example if your program requires the use of 15 segments we can use the 10 segments of Program 1 and the first 5 segments of Program 2 making Segment 15 (5 th Segment of Program 2) an End Segment type. We would then start program 1 and as the program runs through the first 10 segments of program 1 and because there is no end segment in Program 1 it continues to run program 2 until it find the end segment at segment 15. When linking multiple Programs, to use more than 10 segments, the programs need to be sequential. By pressing on Program 1 the following screen is displayed. The below example is a Diurnal cycle of 40degC and 40% day and 10degC and 80% Night. Assuming that 40degC is at midday this program has been written to start at 25degC and 60%RH assuming that the day condition of 40degC and 40%RH is Midday then this program would need to be started by the operator at 6am. Program 1 Segment 1-5 Program 1 Segment 6-10

12 12 The following is a description of what each of the items in the Program are and what function they perform. Segment Type: Jump To: Jump Cycle: Temperature: Humidity: Co2: Hours: Minutes: Seconds: End Action: G Soak Temp The segment type can either be a Time, Jump To, or End type. Time: This determines that the segment is a period of time. The time is set in Hours, Minutes and Seconds. Jump To: This allows the program to repeat a predetermined set of segments. By selecting the Jump To parameter in segment type and then entering a segment value at the Jump To parameter, will tell the program were to jump back to. At Jump Cycle enter how many times it jumps back to or repeats the predetermined set of segments. See Example on next page. End: This tells the program when to end. There has to be an end segment. Failure to enter an end segment will cause the controller to indefinitely dwell at the last segment. The operator would enter the segment number that the program will jump back to. This value is ignored if the segment is set to either a Time or End Segment. The operator would enter a value here as to how many times the Jump To repeats itself. A value of 0 will continually repeat the Jump To segments until the operator ends the Program Cycle manually. This value is ignored if the Segment Type is set to either a Time or End Segment. The operator would enter the Temperature they require the cabinet to achieve. This value is ignored if the segment s Step Type is Jump To. The operator would enter the Humidity they require the cabinet to achieve. This value is ignored if the segment s Step Type is Jump To. The operator would enter the Co2 they require the cabinet to achieve. This value is ignored if the segment s Step Type is Jump To. The operator would enter the required length of time for the segment in Hours. This value is ignored if the segment Step Type is set to either Jump To or End. The operator would enter the required length of time for the segment in Minutes. This value is ignored if the segment Step Type is set to either Jump To or End. The operator would enter the required length of time for the segment in Seconds. This value is ignored if the segment Step Type is set to either Jump To or End. This value determines what will happen when the program ends. It can be set to SOV, which stops the program from operating and controls the Safe Operating Values. Or it can be set to dwell, in which case it will continue to control the Temperature, Humidity and Co2 of the last Time segment. This is the Guaranteed Soak Parameter and is only visible if the Guaranteed Soak is enabled. This parameter is generally not used on the Climatron range of Plant Growth Cabinets as it can extend the time of a Diurnal Program effectively making the Diurnal Cycle longer than 24hours. The Guaranteed Soak allows the Program to maintain its Programmed Temperature Value for the duration of the Segment Time by automatically placing the Program into a holding pattern and not allowing the program to proceed if the Actual Temperature Value deviates the Programmed Temperature Value by a predetermined value. Once the Actual Temperature Value is within the predetermine range then the Program will automatically continue.

13 13 G Soak Humidity G Soak CO 2 This is the Guaranteed Soak Parameter and is only visible if the Guaranteed Soak is enabled. This parameter is generally not used on the Climatron range of Plant Growth Cabinets as it can extend the time of a Diurnal Program effectively making the Diurnal Cycle longer than 24hours. The Guaranteed Soak allows the Program to maintain its Programmed Humidity Value for the duration of the Segment Time by automatically placing the Program into a holding pattern and not allowing the program to proceed if the Actual Humidity Value deviates the Programmed Humidity Value by a predetermined value. Once the Actual Humidity Value is within the predetermine range then the Program will automatically continue. This is the Guaranteed Soak Parameter and is only visible if the Guaranteed Soak is enabled. This parameter is generally not used on the Climatron range of Plant Growth Cabinets as it can extend the time of a Diurnal Program effectively making the Diurnal Cycle longer than 24hours. The Guaranteed Soak allows the Program to maintain its Programmed CO 2 Value for the duration of the Segment Time by automatically placing the Program into a holding pattern and not allowing the program to proceed if the Actual CO 2 Value deviates the Programmed CO 2 Value by a predetermined value. Once the Actual CO 2 Value is within the predetermine range then the Program will automatically continue. Lighting/Event Outputs. At each segment page there is a Lighting/Events button. By pressing this button the display shows Eight events that can be turned ON and OFF for each segment. The First Event which is generally labelled Lights is what turns the lights ON and/or Off. A total number of Eight Lighting/Event Outputs are available, however only the required hardware is fitted per cabinet. Program 1 Lighting/Event Segment 1-5

14 14 Program 1 Lighting/Event Segment 6-10 Program Features. There are a few other features of the program that cannot be changed but are described below. Guaranteed Soak: This is a tolerance value, set at +/-2.0degC, and guarantees that the Program Set Values for Temperature only are reached. If during a program cycle the Actual Temperature deviates the Program Set Value (PSV) by more than +/-2.0degC the program will be put into a hold mode until the Actual Temperature is within the PSV. There is no Guaranteed Soak on the Humidity Value or the Co2 value. These values can deviate without the program going into a hold mode. Program Start Value: The Program starts at whatever the Actual Temperature, Humidity and Co2 are. If when starting the program the Actual Temperature is more than +/-2.0degC from Segment 1 s PSV the Guaranteed Soak value will hold the program until it reaches Segment 1 s target temperature. Power Failure: In the event of a power failure the Program Cycle will end. On resumption of power the cabinet will control the Safe Operating Values.

15 15 Starting the Diurnal/Program. The following screen shows the Diurnal/Program Set-Up screen. Once the desired program has been set up then the operator will need to enter the desired program number value into Start Program Number. Once the desire value has been entered the operator can then start the program by using the drop down menu. The following describes the item and the function of the parameters in the drop down menu. End The end parameter is what stops a current running program from operating Start The Start parameter is what starts the program that is entered into the Start Program Number. Pause The Pause Parameter will simply pause the program at its present point. It will hold this point until the resume parameters is selected. If the Start parameter is selected while a program is in pause it can restart the program from the beginning. Resume The Resume parameter will resume a program after it has been paused. Diurnal/Program Set Up Screen. Note: The Program can be Started, Stopped, Paused and Resumed in the Main Menu Screen. However you cannot select the Program Number in the Main Menu Screen. When the program is operating the Start Program Number value disappears and the Program Number Running value appears. The Program Running Number is a read only value just to give the operator and understanding of which program is operating. To change the Program that is running the operator will need to End the program to change the Start Program Number. This can only be performed in the Program Set-Up page.

16 16 Main Screen (SOV) Showing Diurnal Drop Down Menu. Main Screen (PSV Mode)

17 17 Trend Screen The images below are the Trend and the Co2 Trend Screen. They show a live trend of the performance of the cabinet. The screen shows the last 12hr period. By pressing the left pointing arrows the screen scrolls back to view a graphical depiction of the previous period from power up. A total of approximately 800days of logging can be viewed. After approximately 800 days the data is lost. The Trend Screen is refresh s every time power to the instrument is cycled at power up. Trend Screen Co2 Trend Screen

18 18 Data Screen By pressing the Data Menu Button the image below is displayed. On this screen Data can be retrieved for archiving purposes. Insert a USB Memory Card into the USB port at the front of cabinet. Keep watching the screen for the following message USB Disk/SDMMC Card Plugin Once this message has been viewed the operator can press the Download Data to USB button. The Red Indicator will flash whilst data is being downloaded to the USB Memory Card. When the Red Indicator stops flashing it is safe to remove the USB Memory Card. The length of time it takes to download the data will depend on how much data is being downloaded. If the memory is full, then the download period could be quite long. Data is downloaded as a Comma Delimited File. This data can be imported into Microsoft Excel. When importing data make sure that the date format is set for YMD (Year-Month-Day). Every 24hrs the Data Log Menu screen is refreshed. The Data that is downloaded to the USB Memory Card is downloaded in files that represent every 24hrs. The data in the table is refreshed every 24hrs. However the data in the memory that can be downloaded will store approximately 800 days. Data Menu Screen.

19 19 Security Screensaver. The Touchscreen is fitted with a Security Screensaver to stop unauthorised access to the controlling parameters. This Security Screensaver becomes active if the Touchscreen has not been touched for more than 5minutes or if power is cycled. If the Touchscreen has not been touched for more than 10minutes the Backlight switches off and the screen goes blank. (This is designed to lengthen the life of the Touchscreen). To re-illuminate the Touchscreen simply touch the screen and the Security Screensaver will be shown as below. This Security Screensaver allows the operator to check the conditions without the need to enter the security code to access the Control Pages of the Touchscreen. Security Screensaver (SOV Mode) Security Screensaver (DSV Mode) If the Security Screensaver is active and the screen is touched a Pop-Up window appears as shown in the next image.

20 20 Security Screensaver with Pop-Up Login Message To exit out of the Security Screensaver simply press the close button. Then press the Press to Log In & Exit Screensaver Button. The User Access window will appear. Security Screensaver with User Access Window. To exit out of the Security Screensaver and enter into the Main Menu Screen use the following passcodes: User Number: 1 Passcodes: 1111 These passcode should only be given to Authorised Personnel. To enter the User Number and/or the Passcode simply press the Numeric Window and the Numeric Keyboard will be displayed. Simply enter the User Number or the Password and press enter.

21 21 Security Screensaver with Pop-Up Numeric Keypad. As soon as you have pressed enter simply touch the screen anywhere within the Black rectangle. The Touchscreen will then show the Main Screen as shown below. Main Menu Screen (SOV Mode)

22 22 Calibration Screen. The Thermoline Touchscreen has been fitted with a simple one point calibration adjustment. Access to the Calibration is password protected. To access simply touch the Thermoline Logo and the User Access window will appear. Main Menu Screen with User Access Window To access the Calibration Screen use the following passcodes: User Number: 2 Passcodes: 2222 These passcode should only be given to Authorised Personnel. Calibration Screen. To adjust the calibration simply press the Offset window you require to adjust and enter the difference between the PV and you calibrated device. For example if the PV is showing 10.0degC and you calibrated device indicates the cabinet is at 9.0dgC then the Calibration Offset that needs to be entered is -1.0degC. By pressing the System button in the calibration screen the following screen is displayed.

23 23 System Screen & Passcodes. By pressing the System Button on the Calibration Page the above screen is displayed. This is the System Settings Screen. It shows the Network Communication parameters, (These will only be displayed if connected to a network) The Time & Date settings, Passcodes and Memory information. To change the Time and date simply touch the parameter that needs to be changed and enter the current or required Time and Date. Please note that the Time does not automatically adjust for Daylight Savings. This needs to be manually adjusted. Passcodes can be changed if needed. Passcode Number 1 is the passcode for User 1. This is the passcode required to exit the screen saver mode. Passcode number 2 is the passcode for user 2 and allows access to the Calibration, System Settings page and the Program Screen. It advised that passcodes are only given to authorised personnel. Thermoline takes no responsibility for lost/forgotten passcodes. Please remember new passcodes. If Passcodes are forgotten they can be retrieved however it will incur the cost of a service technician to come to site. Memory information shows the amount of memory left on the Touchscreen before old data is lost. The number of data files indicates the number of days of data that is stored; this can be as high as 800days. The size of the raw data files is indicative of the amount of memory being used. It does not indicate the size of the data files that are downloaded to the Flash Memory USB port. When the files are downloaded to the Flash Memory USB port they are converted from a file specific with the touchscreen to a Comma Separated File (CSV). (See Data Menu). System Screen Service Screen. This screen is for the sole purpose of our service technicians or service contractors. This is a password protected screen and is only accessible by authorised Thermoline Technicians or Authorised Thermoline Contract Technicians.

24 24 Diagnostics Screen. The Diagnostics screen is simply a screen to help the operator when problems may occur. For example if the STAR-700 is operating a Program Cycle and there is a cycle of Power, the STAR- 700 usually reverts back to SOV mode. However as power loss may occur due to storms and lighting strike and possibly construction work, the disruptive power supply may cause interference with the communication cable and cause the STAR-700 Controller to turn the control actions for Temperature, Humidity and CO 2 Off. The Diagnostic screen allows the Authorised operator to turn the Temperature, Humidity and CO 2 functions back on again. It also shows the percentage output of each control function. This is a good diagnostic tool if the cabinet is not operating correctly. Diagnostic Screen. Contact Screen The Image Below is the Thermoline Contact Page. Contact Screen.

25 25 Regular Checks and Maintenance. Owing to the conditions under which the chamber will operate, some regular checks need to be performed, as follows, The humidifier is continuously evaporating water to produce steamer humidity control. This will leave behind deposits of mineral salts inside the tank, which will eventually form a crust around the elements and may cause premature failure of the elements. It is important that the tank is flushed regularly to reduce this effect. A drain valve is fitted to the humidifier tank to allow it to be emptied. With the power turned off open this valve to drain the tank, and then close it before turning on the power. The water will automatically fill the tank with fresh water. The frequency of this action will depend upon the type of water used and the temperature and humidity conditions set for the plant growth chamber. No water should be allowed to build up in the base of the chamber (below the floors); the floor drain should be checked regularly for blockages. Light intensities should be checked with a light meter, and lamps replaced if necessary. The glass between the loft area and the growth area may need cleaning occasionally, as a dust build-up can also affect light intensity. Intensity of the 400-watt lamps at delivery time is nominally 1000 µmol/m²/sec at 1 metre down from lamps. Lamp Part No LU 400/HO/T/40 (GE Lighting). Alternate Metal Halide HQI-T-400 (Osram). As the refrigeration runs continuously, there is a constant airflow being drawn through the condenser. Due to airborne particles the Air Inlet filter will need to be cleaned regularly. This can be accessed from the wire grill panel at the front of the cabinet. Remove the wire grill panel at the front of the cabinet and you will see a finned aluminium condenser. With a standard soft bristle brush; dust off any dirt or grime. Replace the wire grill panel when finished to avoid unwanted damage to the aluminium condenser face.

26 % RH % RH 26 Temperature/Humidity Limits (Lights Off) Min RH Max RH ºC. 10ºC 15C. 20ºC 25ºC. 30ºC. 35ºC. 40ºC. 45ºC. Temperature Temperature/Humidity Limits (Lights On) Min RH Max RH ºC. 10ºC 15C. 20ºC 25ºC. 30ºC. 35ºC. 40ºC. 45ºC. Temperature Conditions are not guaranteed when the ambient temperature exceeds 30.0ºC.

27 27 Operating Guidelines for a Hydraulic Adjustable Shelf. The Thermoline Plant Growth Cabinet has been fitted with a Hydraulic Adjustable Shelf/Floor System. This enables the operator to adjust the height of the shelf by 400mm without the need to remove plants or open the door. Shelf/Floor Adjustment. To adjust the shelves simply turn the Shelf Adjustment Arm. A clockwise rotation will raise the shelf and anti-clockwise will lower the shelf. The Hydraulic adjustment allows for 400mm of adjustment without the need to open the doors or remove any Plant s. If more than 400mm of adjustment is needed then the Plant s will need to be removed from the cabinet and the Stainless Steel floor removed. Once the Floor has been removed the Front and Back Floor supports can be removed and raised to the next support level. There are 3 support levels at 300mm centres. This allows for a total of 1000mm of shelf adjustment within the cabinet (See Photos at the end of this document). Please note that the Floor Supports are front and back specific. The Front Support has two blanking plenums that fit between the access doors. This is to prevent the air circulation from short cycling. When adjusting the Shelf Height in an anti-clockwise direction (Lowering the Shelf) you may find that the shelf is not lowering at the same rate at which you are adjusting the arm. This is due to the Hydraulic oil slowly purging back in to the Purge cylinder. Do not be concerned as it will eventually catch up. This will be less noticeable when loaded with plants as the weight helps with the purge of oil. When adjusting the shelf in a clockwise direction (Raising the Shelf) please take great care not to allow the product on the shelf to touch the Glass Roof. Any hard or sharp items could cause the glass to break. As the hydraulic oil in the shelf system is affected by Temperature, you will notice movement of the shelf height. The shelf height will move between mm throughout the 5.0degC to 45.0degC range.

28 28 Loading the Shelf/Floor. When placing Plant on the floor please load the plant in an even and uniform manner determined by weight not volume. The reason for this is that the four hydraulic rams are connected to one common plunge cylinder. If the Plants are placed unevenly by weight you will find that the floor may not be level. Do not overload the floor. The maximum Total weight that the Hydraulic Shelf system can hold is 300kg. Do not exceed this limit. The above image shows the Shelf Adjustment arm. Simply turn this Clockwise to raise the Floor or anti-clockwise to lower the floor

29 29 Above image shows the left hand floor in place. Please note that the far left and far right floors are specific to the end location. (This can be determined by the additional blanking plenum on the end). The Left and Right floor ends are interchangeable. The above image shows the right hand floor in place.

30 30 Above image shows all of the Floor panels in place. Above image shows the Floor adjusted to the middle support on the Hydraulic Ram

Plant Growth Cabinets

Plant Growth Cabinets Plant Growth Cabinets MODELS INCLUDE: TPG-5000-TH-Co2 TPG-6000-TH-Co2 Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline Scientific ABN 80 000 859 129 10-12 Ross Place. Wetherill Park. N.S.W. 2164.

More information

Plant Growth Cabinets

Plant Growth Cabinets Plant Growth Cabinets MODEL: TPG-1260-TH-Co2 Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline Scientific ABN 80 000 859 129 9 Tarlington Place, Smithfield. N.S.W. 2164. Australia. P.O. Box 6862,

More information

Plant Growth Cabinets

Plant Growth Cabinets Plant Growth Cabinets MODELS INCLUDE: TPG-2400-TH-Co2 TPG-2900-TH-Co2 Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline Scientific ABN 80 000 859 129 9 Tarlington Place, Smithfield. N.S.W. 2164.

More information

for CLIMATRON GROWTH CABINET MODEL CLIMATRON 520 & 1100-DL/SL-H-CO 2 With Humidity, CO 2 & Touch screen Control REVISION

for CLIMATRON GROWTH CABINET MODEL CLIMATRON 520 & 1100-DL/SL-H-CO 2 With Humidity, CO 2 & Touch screen Control REVISION for CLIMATRON GROWTH CABINET MODEL CLIMATRON 520 & 1100-DL/SL-H-CO 2 With Humidity, CO 2 & Touch screen Control REVISION 26-01-16 Thermoline Scientific Equipment Pty. Ltd. T/AThermoline ScientificABN 80

More information

CLIMATRON GROWTH CABINETS

CLIMATRON GROWTH CABINETS CLIMATRON GROWTH CABINETS (+4 C to +45 C) (Ambient to 90% rh) (Image: CLIMATRON-520-SL-H and CLIMATRON-1100-DL) Climatron Growth Cabinet Series Proudly designed and manufactured in Australia Customize

More information

REFRIGERATED RECIRCULATORY COOLER

REFRIGERATED RECIRCULATORY COOLER REFRIGERATED RECIRCULATORY COOLER MODEL INCLUDES: TRC-3000 Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline Scientific ABN 80 000 859 129 10-12 Ross Place. Wetherill Park N.S.W. 2164. Australia.

More information

OPERATING INSTRUCTIONS FOR: MODEL: TGO-80W, 150W, 240W GLASSWARE DRYING OVEN

OPERATING INSTRUCTIONS FOR: MODEL: TGO-80W, 150W, 240W GLASSWARE DRYING OVEN OPERATING INSTRUCTIONS FOR: MODEL: TGO-80W, 150W, 240W GLASSWARE DRYING OVEN Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill

More information

LABORATORY ILLUMINATED FLOTATION BATH

LABORATORY ILLUMINATED FLOTATION BATH LABORATORY ILLUMINATED FLOTATION BATH MODELS INCLUDE: TFB-1 Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 6862 Wetherill Park DC NSW 1851

More information

i.c³ User Guide For Helmer i.series Ultra-Low Freezers A/A

i.c³ User Guide For Helmer i.series Ultra-Low Freezers A/A i.c³ User Guide For Helmer i.series Ultra-Low Freezers 360175-A/A Document History Revision Date CO Supersession Revision Description A 18 APR 2014* 9275 n/a Initial release. * Date submitted or change

More information

OPERATING INSTRUCTIONS FOR:

OPERATING INSTRUCTIONS FOR: OPERATING INSTRUCTIONS FOR: MODEL: BL-30 & BL-130 REFRIGERATED BATH Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill Park DC

More information

What to expect from your water softener

What to expect from your water softener What to expect from your water softener All water softeners work on the same basic principal. Hard water flows through a bed of resin and the calcium and magnesium, the minerals that are responsible for

More information

LABORATORY OVENS MODELS INCLUDE: TO-152G & TOH-152G TO-152F & TO-235F DEHYDRATING OVENS MODELS INCLUDE: TD-150F TD-330F TD-500F

LABORATORY OVENS MODELS INCLUDE: TO-152G & TOH-152G TO-152F & TO-235F DEHYDRATING OVENS MODELS INCLUDE: TD-150F TD-330F TD-500F 0 LABORATORY OVENS MODELS INCLUDE: TO-152G & TOH-152G TO-152F & TO-235F DEHYDRATING OVENS MODELS INCLUDE: TD-150F TD-330F TD-500F WITH WEST 6100 CONTROL 1 IMPORTANT INFORMATION This manual contains operating

More information

WITH OMRON E5CC CONTROL

WITH OMRON E5CC CONTROL LABORATORY OVENS, FAN FORCED & GRAVITY CONVECTION. MODELS: TO-152G & TOH-152G TO-152F, TOH-152F & TO-235F TO-330F & TO-500F WITH OMRON E5CC CONTROL Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline

More information

TBR 40 1 GD Blood Refrigerator Instruction Manual. for BLOOD STORAGE REFRIGERATORS MODEL TBR 40 1 GD. (40 x 500ml Blood Bag Capacity)

TBR 40 1 GD Blood Refrigerator Instruction Manual. for BLOOD STORAGE REFRIGERATORS MODEL TBR 40 1 GD. (40 x 500ml Blood Bag Capacity) for BLOOD STORAGE REFRIGERATORS MODEL TBR 40 1 GD (40 x 500ml Blood Bag Capacity) REVISION 10/10/07 PLEASE READ CAREFULLY BEFORE OPERATION Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 9

More information

User Manual. Dryer Controller M720

User Manual. Dryer Controller M720 User Manual Dryer Controller M720 Hardware version 1.00 Software version 1.00 Preliminary version Manual M720 Dryer controller Page 1 of 42 Document history Preliminary version: - Created in April, 2009

More information

User Manual. Vanvex Optima 180 Domestic Hot Water. Version

User Manual. Vanvex Optima 180 Domestic Hot Water. Version GB User Manual Vanvex Optima 180 Domestic Hot Water Version 3.07-0310 Table of contents Page 1. Users Guide 1.1 Use... 3 1.2 Altering of the operation data... 3 1.3 Operating menu... 4 1.4 Factory default

More information

for PHARMACY REFRIGERATOR MODEL TPR SD/GD TPR-750/950 2 SD/GD TPR SD/GD 520, 750, 950, 1150 Ltr CAPACITY REVISION

for PHARMACY REFRIGERATOR MODEL TPR SD/GD TPR-750/950 2 SD/GD TPR SD/GD 520, 750, 950, 1150 Ltr CAPACITY REVISION for PHARMACY REFRIGERATOR MODEL TPR-520 1 SD/GD TPR-750/950 2 SD/GD TPR-1150 3 SD/GD 520, 750, 950, 1150 Ltr CAPACITY REVISION 10-8-17 Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12

More information

for LABORATORY REFRIGERATOR MODEL TELR-145/ L/200L CAPACITY REVISION

for LABORATORY REFRIGERATOR MODEL TELR-145/ L/200L CAPACITY REVISION for LABORATORY REFRIGERATOR MODEL TELR-145/200 145L/200L CAPACITY REVISION 10-8-17 Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10/12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill

More information

FDM Series. User Manual. SKOPE Food Display Cabinet Integral models: FDM900i/1200i/1500i. Model FDM1200i

FDM Series. User Manual. SKOPE Food Display Cabinet Integral models: FDM900i/1200i/1500i. Model FDM1200i FDM Series SKOPE Food Display Cabinet Integral models: FDM900i/1200i/1500i Model FDM1200i MAN2056O Rev 2.0 Aug. 2010 Integral models: FDM900i/1200i/1500i SKOPE Food Display Cabinet MAN2056O Rev 2.0 Aug

More information

Dryer Controller M720

Dryer Controller M720 User Manual Dryer Controller M720 Hardware version 2.00 Software version 2.00 Manual M720 Dryer controller Page 1 of 60 Document history Preliminary version: - Created in April, 2009 Hardware Version 2.00,

More information

MIX Boiler & Font Range Service Manual

MIX Boiler & Font Range Service Manual MIX Boiler & Font Range Service Manual 1000870# 1000871# 1000875# 1000880# 1000887# 1000878 1000879 2300268 www.marcobeveragesystems.com Ireland Tel: +353 (1) 295 2674 UK Tel: +44 (0207) 2744577 Service

More information

Model 1820 Dehumidifier

Model 1820 Dehumidifier Model 1820 Dehumidifier Installation Instructions SAFETY INSTRUCTIONS WARNING 1. 120 Volts may cause serious injury from electric shock. Disconnect electrical power before starting installation or servicing.

More information

Smart thermostat with Humidification/De-humidification control

Smart thermostat with Humidification/De-humidification control x Smart thermostat with Humidification/De-humidification control Enter/Confirm Scroll Right = Increase Left = Decrease Back/Cancel TABLE OF CONTENTS Everyday Use 1. Adjusting Temperature...3 2. Adjusting

More information

Mix Boiler & Font Range ( #, #, #, , )

Mix Boiler & Font Range ( #, #, #, , ) Mix Boiler & Font Range (1000870#, 1000871#, 1000880#, 1000878, 1000879) Service Manual Marco Beverage Systems Ltd. 63d Heather Road, Sandyford Industrial Estate, Dublin 18, Republic of Ireland Ireland

More information

for LABORATORY STORAGE FREEZERS MODELS TUF GD/SD, TUF GD/SD, & TUF GD/SD 520, 740, & 950 Litre CAPACITY REVISION

for LABORATORY STORAGE FREEZERS MODELS TUF GD/SD, TUF GD/SD, & TUF GD/SD 520, 740, & 950 Litre CAPACITY REVISION for LABORATORY STORAGE FREEZERS MODELS TUF-520 1-GD/SD, TUF-750-2-GD/SD, & TUF-950-2-GD/SD 520, 740, & 950 Litre CAPACITY REVISION 26-1-16 Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12

More information

TECHNICAL MANUAL CVM 20 C 5005 CV/04-99 GB

TECHNICAL MANUAL CVM 20 C 5005 CV/04-99 GB Summary 1 CONNECTIONS... 3 1.1 TEMPERATURE PROBES...3 1.2 LOW VOLTAGE DIGITAL INPUTS...3 1.3 LIVE DIGITAL INPUTS...4 1.4 RELAY OUTPUTS...5 2 POWER SUPPLY... 6 3 SERIAL CONNECTIONS... 6 4 SOFTWARE... 7

More information

Installation Instructions. Filtered Chilled drinking water for commercial kitchens and tea rooms.

Installation Instructions. Filtered Chilled drinking water for commercial kitchens and tea rooms. Installation Instructions Zip HydroTap Filtered Chilled drinking water for commercial kitchens and tea rooms. Affix Model Number Label Here 801525 801525 - Zip HydroTap Installation Instructions - Nov.

More information

KELCO F29 PROGRAMMABLE FLOW SWITCH

KELCO F29 PROGRAMMABLE FLOW SWITCH KELCO F29 PROGRAMMABLE FLOW SWITCH PROGRAMMING INSTRUCTIONS Version 010916 KELCO Engineering Pty Ltd Sydney Australia www.kelco.com.au VERY IMPORTANT This Kelco controller has been fully tested and calibrated.

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Humidity Cabinet (without Digital Data Recorder) ELE International Chartmoor Road, Chartwell Business Park Leighton Buzzard, Bedfordshire, LU7 4WG England phone: +44 (0) 1525 249200

More information

cussons Refrigeration Assembly Range TECHNOLOGY REFRIGERATION AND AIR CONDITIONING CUSSONS TECHNOLOGY LABORATORY RECOMMENDATION

cussons Refrigeration Assembly Range TECHNOLOGY REFRIGERATION AND AIR CONDITIONING CUSSONS TECHNOLOGY LABORATORY RECOMMENDATION REFRIGERATION AND AIR CONDITIONING CUSSONS LABORATORY RECOMMENDATION Cussons Refrigeration laboratories are offered to provide teaching to a range of different skill levels. In all the laboratories teaching

More information

PLEASE READ CAREFULLY BEFORE OPERATION

PLEASE READ CAREFULLY BEFORE OPERATION for LABORATORY STORAGE FREEZERS MODEL TUF 530/800/1275-20-1/2/3-GD/SD 530/800/1275Ltr CAPACITY REVISION 03/11/05 PLEASE READ CAREFULLY BEFORE OPERATION Thermoline Scientific Equipment Pty. Ltd. ABN 80

More information

CDE2TI, CDE2TIB, CDE2ECC, CDE2ECCB, CDE24ECC & CDE24ECCB AUS/NZ

CDE2TI, CDE2TIB, CDE2ECC, CDE2ECCB, CDE24ECC & CDE24ECCB AUS/NZ CDE2TI, CDE2TIB, CDE2ECC, CDE2ECCB, CDE24ECC & CDE24ECCB AUS/NZ 08/50841/3 Issue 3 1 614 770 250 250 13 : 17 605 605 2kW 2.4kW CDE2Ti(B) (Fig.3) CDE2ECC(B) & CDE24ECC(B) (Fig.2) 2 3 4 LCD x o eco X Y eco

More information

AQUAMAC MODELS

AQUAMAC MODELS AQUAMAC MODELS 300-500-800-1000 OUR SYSTEMS CONFORM TO EC STANDARD 73/23 CEE - 89/336 INSTRUCTION MANUAL Cod. 71503095/0-5/97 WARNING! THE FOLLOWING OPERATIONS AND THOSE EVIDENCED WITH THE SYMBOL ON THE

More information

T-Series Air Conditioner T20 Model

T-Series Air Conditioner T20 Model INSTRUCTION MANUAL T-Series Air Conditioner T20 Model Protecting Electronics. Exceeding Expectations. McLean Cooling Technology 11611 Business Park Blvd N Champlin, MN 55316 USA Tel 763-323-8200 Fax 763-576-3200

More information

Installation Instructions / User s Manual TSTAT0406 and TSTAT0408

Installation Instructions / User s Manual TSTAT0406 and TSTAT0408 997-060180-5 Installation Instructions / User s Manual TSTAT0406 and TSTAT0408 4 HEAT 2 COOL DUAL FUEL TSTAT0406 & TSTAT0408-4 WIRE CAPABLE THERMOSTAT (NAXA00201DB Daughter Board sold separately) LEFT

More information

VF Series. User Manual. SKOPE Vertical Freezer. MAN10521 Rev. 3.3 Jun VF1000

VF Series. User Manual. SKOPE Vertical Freezer. MAN10521 Rev. 3.3 Jun VF1000 VF Series SKOPE Vertical Freezer MAN10521 Rev. 3.3 Jun. 2016 VF1000 SKOPE Warranty Protection Register now for peace of mind It s quick and simple. Take a few minutes to register your SKOPE product and

More information

Using the. Ducted Gas Central Heating Dual Cycle Refrigerated Air Conditioning Ducted Evaporative Air Conditioning. with your.

Using the. Ducted Gas Central Heating Dual Cycle Refrigerated Air Conditioning Ducted Evaporative Air Conditioning. with your. Using the Ducted Gas Central Heating Dual Cycle Refrigerated Air Conditioning Ducted Evaporative Air Conditioning with your multi-appliance Touch Pad Control Owner s Manual Please keep this important manual

More information

SLT-Series Installation and maintenance instructions

SLT-Series Installation and maintenance instructions Installation and maintenance instructions MODELS UVG SLT1, UVG SLT2, UVG SLT30, UVG SLT40, UVG SLT75, UVG SLT80, UVG SLT125, UVG SLT172 ATTENTION: Please read this manual carefully and follow the instructions.

More information

User s Manual. THE iq Drive SYSTEM USER S INFORMATION IMPORTANT. Variable Speed Ultra-High SEER Split System IMPORTANT NOTE

User s Manual. THE iq Drive SYSTEM USER S INFORMATION IMPORTANT. Variable Speed Ultra-High SEER Split System IMPORTANT NOTE User s Manual Variable Speed Ultra-High SEER Split System These units have been designed and tested for capacity and effi ciency in accordance with ARI standards. These outdoor air conditioning units are

More information

OPERATION & MAINTENANCE MANUAL RHS680

OPERATION & MAINTENANCE MANUAL RHS680 OPERATION & MAINTENANCE MANUAL RHS680 Refrigerant Handling System 4075 East Market Street York, PA 17402 800-468-2321 tech@rtitech.com Manual P/N 035-80740-00 (Rev 1- May 22, 2001) TABLE OF CONTENTS Startup

More information

Operation Manual SCT14B and SCT18B. Inspection. 3 General Description. 3 General Requirements. 3 Standard Features.

Operation Manual SCT14B and SCT18B. Inspection. 3 General Description. 3 General Requirements. 3 Standard Features. Spot Cooling Systems, Inc. 120 Century Drive Suite 00 Carrollton, TX 7006 00-6-776 Operation Manual SCT1B and SCT1B Warning! Improper installation, adjustment, alteration, service, or maintenance can cause

More information

PLEASE TAKE TIME TO READ THIS MANUAL

PLEASE TAKE TIME TO READ THIS MANUAL OPERATING INSTRUCTIONS FOR LEEC HUMIDITY CABINET MODELS SFC2C/RH AND SFC3C/RH FITTED WITH JUMO dtron 316 TEMPERATURE CONTROLLER, JUMO dtron 316 HUMIDITY CONTROLLER, AND TLK38 OVER TEMPERATURE CUT OUT (240V)

More information

Flopurge TS. Operation Manual

Flopurge TS. Operation Manual Flopurge TS Operation Manual Part Number 079-0204 Spectron Gas Control Systems United Kingdom Unit 4, Herald Court, University of Warwick Science Park, Coventry, CV4 7EZ +44 (0)24 7641 6234 sales@spectron-gcs.com

More information

Platinous. temperature. and humidity. chambers. Top Quality Design. With an Easy-to-use. Touch-Screen. Programmer

Platinous. temperature. and humidity. chambers. Top Quality Design. With an Easy-to-use. Touch-Screen. Programmer Platinous temperature and humidity chambers Top Quality Design With an Easy-to-use Touch-Screen Programmer Platinous chambers are innovative, built with the busy user in mind. If you have ever used an

More information

Operating, Installation and Service Manual W3400H, CLC 41 Clarus Control

Operating, Installation and Service Manual W3400H, CLC 41 Clarus Control Operating, Installation and Service Manual W3400H, CLC 41 Clarus Control 438 9202-01 05.26 Washer extractor, drum volume 400 litres 3 Contents Machine operation... 7 General description... 7 Automatic

More information

PROAIR Air Conditioner. CR29 Model INSTRUCTION MANUAL nvent Rev. I P/N

PROAIR Air Conditioner. CR29 Model INSTRUCTION MANUAL nvent Rev. I P/N PROAIR Air Conditioner CR29 Model INSTRUCTION MANUAL Rev. I P/N 89104461 TABLE OF CONTENTS Warranty and Return Policy...2 RECEIVING THE AIR CONDITIONER...3 HANDLING AND TESTING THE AIR CONDITIONER...3

More information

-DUCTED SYSTEM- OPERATING INSTRUCTIONS

-DUCTED SYSTEM- OPERATING INSTRUCTIONS HOMEDEAL AIR CONDITIONING (QLD) PTY LTD Heating & Cooling Specialists Sales, Service and Maintenance (07) 3397 8900 www.homedealairconditioning.com.au Contractors Licence No.897403 -DUCTED SYSTEM- OPERATING

More information

Recirculating Chiller RC350G-RC400G RC1400G-RC3000G. Operating Manual

Recirculating Chiller RC350G-RC400G RC1400G-RC3000G. Operating Manual Recirculating Chiller RC350G-RC400G RC1400G-RC3000G Operating Manual Part No 09931/Issue 10 Page 2 April 2010 CONTENTS 1 Safety 4 2 Installation 5 2.1 Connection for closed loop circulation 6 2.2 Connection

More information

T-SERIES Air Conditioner. T29 Model INSTRUCTION MANUAL nvent Rev. I P/N

T-SERIES Air Conditioner. T29 Model INSTRUCTION MANUAL nvent Rev. I P/N T-SERIES Air Conditioner T29 Model INSTRUCTION MANUAL Rev. I P/N 89104464 TABLE OF CONTENTS Warranty and Return Policy...2 IMPORTANT NOTICE...2 RECEIVING THE AIR CONDITIONER...3 HANDLING AND TESTING THE

More information

ST9400S User Guide. 1 Day Programmer, 2 channel With Boiler Service Reminder / Shut-down Feature

ST9400S User Guide. 1 Day Programmer, 2 channel With Boiler Service Reminder / Shut-down Feature PLEASE RESPECT YOUR ENVIRONMENT! Take care to dispose of this product and any packaging or literature in an appropriate way WHAT IS A PROGRAMMER?...an Explanation for Householders (as recommended by the

More information

Cooled Incubators Series 1, 3 & 4. Instruction Manual

Cooled Incubators Series 1, 3 & 4. Instruction Manual Cooled Incubators Series 1, 3 & 4 Instruction Manual Instruction Manual for LMS Cooled Incubators Series 1, 3 & 4 Series 1 Models 305-60 litre capacity 303-180 litre capacity 250-250 litre capacity Series

More information

T-SERIES Air Conditioner. T50 Model INSTRUCTION MANUAL nvent Rev. F P/N

T-SERIES Air Conditioner. T50 Model INSTRUCTION MANUAL nvent Rev. F P/N T-SERIES Air Conditioner T50 Model INSTRUCTION MANUAL Rev. F P/N 10-1008-203 TABLE OF CONTENTS Warranty and Return Policy...2 RECEIVING THE AIR CONDITIONER...3 HANDLING AND TESTING THE AIR CONDITIONER...3

More information

HORIZONTAL LAMINAR FLOW CABINET

HORIZONTAL LAMINAR FLOW CABINET HORIZONTAL LAMINAR FLOW CABINET MODELS INCLUDE: HLFT900 HLFT1000 HLFT1200 HLFT1500 HLFT1800 Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline Scientific ABN 80 000 859 129 10-12 Ross Place. Wetherill

More information

SPC-56 SHORT PLANT.

SPC-56 SHORT PLANT. www.biochambers.com PROVIDING GROWTH TO RESEARCH. SPC-56 SHORT PLANT Short Plant growth chambers and rooms are specifically designed to maximize growth area by incorporating a multi-tier shelf design.

More information

OWNER S MANUAL. Vintage Classic HEAT COOL models. Proudly Made in the USA

OWNER S MANUAL. Vintage Classic HEAT COOL models. Proudly Made in the USA OWNER S MANUAL Vintage Classic HEAT COOL models Proudly Made in the USA support@aquacomfort.com www.aquacomfort.com/service-and-support 888-475-7443 Manufacturing High Quality, High Efficiency Heat Pump

More information

COMMERCIAL GRADE UNDER COUNTER REFRIGERATION RANGE

COMMERCIAL GRADE UNDER COUNTER REFRIGERATION RANGE COMMERCIAL GRADE UNDER COUNTER REFRIGERATION RANGE The Grand Deluxe Range designed with the bar and restaurant industry in mind. The Grand Deluxe line of kegerators are built to stand up to heavy use in

More information

The Classeq under counter range

The Classeq under counter range Installation & Operators Manual The under counter range Part number 902.0011 Revision C Effective date January 2010 Language English Glasswashers Eco 1 Eco 2 Eco 3 Duo 2 Duo 3 Dishwasher Hydro 500 Hydro

More information

Operations Manual TS400. Test Station for G450/G460 Gas Detector

Operations Manual TS400. Test Station for G450/G460 Gas Detector TS400 Test Station for G450/G460 Gas Detector Operations Manual 1194 Oak Valley Dr, Ste 20, Ann Arbor MI 48108 USA (800) 959-0329 (734) 769-0573 www.goodforgas.com GfG Products for Increased Safety Congratulations

More information

Installation, Operating and Servicing Instructions

Installation, Operating and Servicing Instructions Installation, Operating and Servicing Instructions Countertop Induction Hobs IH21, IH3, IH42 Please make a note of your product details for future use: Date Purchased: Model Number: Serial Number: Dealer:

More information

T-SERIES Air Conditioner. T43 Model INSTRUCTION MANUAL nvent Rev. I P/N

T-SERIES Air Conditioner. T43 Model INSTRUCTION MANUAL nvent Rev. I P/N T-SERIES Air Conditioner T43 Model INSTRUCTION MANUAL Rev. I P/N 10-1008-145 TABLE OF CONTENTS Warranty and Return Policy...2 IMPORTANT NOTICE...2 RECEIVING THE AIR CONDITIONER...3 HANDLING AND TESTING

More information

THX-DL Data Logger USER & INSTALLATION MANUAL V

THX-DL Data Logger USER & INSTALLATION MANUAL V THX-DL Data Logger USER & INSTALLATION MANUAL V1.2012 www.thermomax-refrigeration.com Contents PRESENTATION Summary of Features 2 INSTALLATION Safety Precautions 4 THX Unit 4 Sensors 4 Alarm Relay 4 Power

More information

Refrigerator KE T

Refrigerator KE T Refrigerator KE 680-1-3T Service Manual: H8-74-07 Responsible: U. Laarmann KÜPPERSBUSCH HAUSGERÄTE AG E-mail: uwe.laarmann@kueppersbusch.de Tel.: (0209) 401-732 Customer Service Fax: (0209) 401-743 Postfach

More information

Flostop TS D7E and A8E. Operation Manual

Flostop TS D7E and A8E. Operation Manual Flostop TS D7E and A8E Operation Manual United Kingdom Spectron Gas Control Systems Ltd, Unit 4, ATU1, University of Warwick science Park, Coventry, +44 (0) 24 7641 6234 sales@spectron-gcs.com Germany

More information

Operations Manual TS400. Test Station for G450/G460 Gas Detector

Operations Manual TS400. Test Station for G450/G460 Gas Detector TS400 Test Station for G450/G460 Gas Detector Operations Manual 1194 Oak Valley Dr, Ste 20, Ann Arbor MI 48108 USA (800) 959-0329 (734) 769-0573 www.gfg-inc.com GfG Products for Increased Safety Congratulations

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS - SPLIT DUCTED SYSTEMS CONGRATULATIONS on your purchase of an ActronAir air conditioning system. This energy efficient unit has been precision designed, manufactured from high quality

More information

11/2012. Mod: D281/EKA-NP. Production code:

11/2012. Mod: D281/EKA-NP. Production code: 11/2012 Mod: D281/EKA-NP Production code: 916658 INSTRUCTION MANUAL FOR DISHWASHERS UK CONTENTS CHAP 1 PREFACE... 2 CHAP 2 INSTALLATION... 2 2.1 UNPACKING... 2 2.2 POSITIONING... 3 2.3 ELECTRICAL CONNECTION...

More information

SPECTRACOOL Air Conditioner. N21 Model INSTRUCTION MANUAL nvent Rev. G P/N

SPECTRACOOL Air Conditioner. N21 Model INSTRUCTION MANUAL nvent Rev. G P/N SPECTRACOOL Air Conditioner N21 Model INSTRUCTION MANUAL Rev. G P/N 89115088 TABLE OF CONTENTS WARRANTY AND RETURN POLICY...2 RECEIVING THE AIR CONDITIONER...3 HANDLING AND TESTING THE AIR CONDITIONER...3

More information

USER AND MAINTENANCE MANUAL

USER AND MAINTENANCE MANUAL FDNF96 DEHUMIDIFIER USER AND MAINTENANCE MANUAL INFORMATION FOR USERS For the purpose and effect of Directives 2002/95/CE, 2002/96/CE and 2003/108/CE, relative to the reduction of the use of hazardous

More information

T-Series Air Conditioner T15 Model

T-Series Air Conditioner T15 Model INSTRUCTION MANUAL T-Series Air Conditioner T15 Model Protecting Electronics. Exceeding Expectations. McLean Cooling Technology 11611 Business Park Blvd N Champlin, MN 55316 USA Tel 763-323-8200 Fax 763-576-3200

More information

5) Do not start or stop the unit by inserting or pulling out the power plug.

5) Do not start or stop the unit by inserting or pulling out the power plug. 3058080 V170306 PURCHASE INFORMATION Thank you for choosing a Soleus Air Portable Air Conditioner. This Owner s Manual will provide you with valuable information necessary for the proper care and maintenance

More information

Model No.: PS08-01 PS10-01 Ref: KY80 KY100

Model No.: PS08-01 PS10-01 Ref: KY80 KY100 8,000/10,000/12,000 BTU Portable Air Conditioner Operating Instructions Model No.: PS08-01 PS10-01 Ref: KY80 KY100 Model No.: PS12-03 Ref: KY120 3119233 V160310 Thank you for choosing a Soleus Air Portable

More information

ICS PACIFIC. Installation Instructions & User Manual. G135L Medical Refrigerator

ICS PACIFIC. Installation Instructions & User Manual. G135L Medical Refrigerator ICS PACIFIC G135L Medical Refrigerator Installation Instructions & User Manual 31 Healey Road, Dandenong South, Victoria, 3175, Australia P.O. Box 4140, Dandenong South BC, Victoria, 3164, Australia E-

More information

Drying Cabinet Installation and Operating Manual

Drying Cabinet Installation and Operating Manual Drying Cabinet Installation and Operating Manual Model:- ECO Dryer 2.0 HP Heat Pump Technology CONTENTS THIS USER MANUAL 3 DATA PLATE DETAILS 3 ADVICE ON SAFE OPERATION 3 DESCRIPTION OF THE CABINET 4 AIR

More information

EBAC MODEL CD425 ( ) INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL

EBAC MODEL CD425 ( ) INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL EBAC MODEL CD425 (1018110) INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL Ebac Industrial Products 704 Middle Ground Boulevard Newport News, VA 23606 Tel: 757 873 6800 Fax: 757 873 3632 Website: www.ebacusa.com

More information

OPERATING MANUAL Enertronic Control System 2

OPERATING MANUAL Enertronic Control System 2 OPERATING MANUAL Enertronic Control System 2 The integrated control system for Lennox chillers in the Ecologic range Manufacturer: Lennox Benelux B.V. Postbus 1028, 3860 BA NIJKERK Watergoorweg 87, 3861

More information

Remote Conditioners. RC-Series. ZPRC Series

Remote Conditioners.  RC-Series. ZPRC Series RC-Series Remote Conditioners RC Series ZPRC Series www.cszindustrial.com Remote Conditioners Two chambers for the price of one Cincinnati Sub-Zero s dual-purpose RC-Series Remote Conditioners are designed

More information

Prime Chiller Modular Upgradable Chiller

Prime Chiller Modular Upgradable Chiller Prime Chiller Modular Upgradable Chiller Instructions for Models Single Stage Thermostat #2604, 2606 Dual Stage Thermostat #2614, 2616 Single Stage Thermostat w/ TXV #2626, 2627 Warning and Safety Instructions...

More information

MISSION CRITICAL Air Conditioning Systems. Maintenance Guide. ClimateWorx International Inc. 14 Chelsea Lane, Brampton, Ontario, Canada L6T 3Y4

MISSION CRITICAL Air Conditioning Systems. Maintenance Guide. ClimateWorx International Inc. 14 Chelsea Lane, Brampton, Ontario, Canada L6T 3Y4 MISSION CRITICAL Air Conditioning Systems Maintenance Guide ClimateWorx International Inc. 14 Chelsea Lane, Brampton, Ontario, Canada L6T 3Y4 Vertical Floor /Wall /Ceiling Mount - Maintenance Manual 2

More information

THERMOMAX COLTREC RCX 100 MICROPROCESSOR REFRIGERATION CONTROL SYSTEM ENGLISH.

THERMOMAX COLTREC RCX 100 MICROPROCESSOR REFRIGERATION CONTROL SYSTEM ENGLISH. THERMOMAX COLTREC RCX 100 MICROPROCESSOR REFRIGERATION CONTROL SYSTEM ENGLISH www.thermomax-group.com CONTENTS SECTION 1 - INTRODUCTION... 2 SECTION 2 - INSTALLATION... 3 2.1 - RCX 100 UNIT... 4 2.2 -

More information

T-SERIES Air Conditioner. T20 Model INSTRUCTION MANUAL nvent Rev. C P/N

T-SERIES Air Conditioner. T20 Model INSTRUCTION MANUAL nvent Rev. C P/N T-SERIES Air Conditioner T20 Model INSTRUCTION MANUAL Rev. C P/N 89114993 TABLE OF CONTENTS Warranty and Return Policy... 2 IMPORTANT NOTICE... 2 RECEIVING THE AIR CONDITIONER... 3 HANDLING AND TESTING

More information

TMEF Series. SKOPE Vertical Freezer. User Manual

TMEF Series. SKOPE Vertical Freezer. User Manual TMEF Series SKOPE Vertical Freezer MAN10132 Rev. 1.0 Oct. 2010 TMEF Series SKOPE Vertical Freezer Type: (CAREL ir32 Controller) MAN10132 Rev. 1.0 Oct. 2010 2010 SKOPE Industries Limited. All rights reserved.

More information

Undercounter Refrigerator Operation Manual i.series and Horizon Series

Undercounter Refrigerator Operation Manual i.series and Horizon Series Undercounter Refrigerator Operation Manual i.series and Horizon Series Blood Bank Models i.series: ib105 (Version B) Horizon Series: HB105 (Version B) Laboratory/Pharmacy Models i.series: ilr105 (Version

More information

PROAIR Air Conditioner. CR23 Model INSTRUCTION MANUAL nvent Rev. D P/N

PROAIR Air Conditioner. CR23 Model INSTRUCTION MANUAL nvent Rev. D P/N PROAIR Air Conditioner CR23 Model INSTRUCTION MANUAL Rev. D P/N 89112522 TABLE OF CONTENTS Warranty and Return Policy...2 RECEIVING THE AIR CONDITIONER...3 HANDLING AND TESTING THE AIR CONDITIONER...3

More information

LevControl LC PLUS OPERATING INSTRUCTIONS ALL OUR SYSTEMS COMPLY WITH DIRECTIVE 73/23 EEC - 89/336. Cod /0-12/97

LevControl LC PLUS OPERATING INSTRUCTIONS ALL OUR SYSTEMS COMPLY WITH DIRECTIVE 73/23 EEC - 89/336. Cod /0-12/97 LevControl LC PLUS ALL OUR SYSTEMS COMPLY WITH DIRECTIVE 73/23 EEC - 89/336 OPERATING INSTRUCTIONS Cod. 71503277/0-12/97 WARNING!!! THE OPERATIONS LISTED BELOW AND THOSE MARKED BY THIS SYMBOL ARE STRICTLY

More information

BasicTroubleshooting Information and Guidelines

BasicTroubleshooting Information and Guidelines BasicTroubleshooting Information and Guidelines BasicTroubleshooting Information and Guidelines Information and Guidelines May 2017 BasicTroubleshooting PRIOR TO CONTACTING CLIMATEMASTER TECHNICAL SUPPORT,

More information

Owner s Manual. Model 8800 Universal Communicating Thermostat. Includes Operating Instructions and Warranty Information

Owner s Manual. Model 8800 Universal Communicating Thermostat. Includes Operating Instructions and Warranty Information Model 8800 Universal Communicating Thermostat Owner s Manual Includes Operating Instructions and Warranty Information READ AND SAVE THESE INSTRUCTIONS 61000762A 8800 Tstat Owners.indd 1 3/28/11 4:19:57

More information

OPERATING MANUAL. EchoTherm PROGRAMMABLE DIGITAL CHILLING INCUBATOR MODELS IN35, IN45 and IN55-12VDC. DOCUMENT NUMBER IN35-03 Revised 15 May 2015

OPERATING MANUAL. EchoTherm PROGRAMMABLE DIGITAL CHILLING INCUBATOR MODELS IN35, IN45 and IN55-12VDC. DOCUMENT NUMBER IN35-03 Revised 15 May 2015 OPERATING MANUAL EchoTherm PROGRAMMABLE DIGITAL CHILLING INCUBATOR MODELS IN35, IN45 and IN55-12VDC DOCUMENT NUMBER IN35-03 Revised 15 May 2015 TORREY PINES SCIENTIFIC, INC. 2713 Loker Ave. West Carlsbad,

More information

2000 SERIES DIAGNOSTIC ALARM CONTROL SYSTEM

2000 SERIES DIAGNOSTIC ALARM CONTROL SYSTEM 2000 SERIES DIAGNOSTIC ALARM CONTROL SYSTEM OPERATING INSTRUCTIONS MODELS: 2300 2500 2700 This information is relevant to systems fitted with Issue 4.1 (or later) Master Keypad Software, also to Networked

More information

ST9400A User Guide. Features

ST9400A User Guide. Features Features Easy to use slider and buttons combined with LoT Technology and an OK button, allows you to confi rm changes and stay in control. PLEASE RESPECT YOUR ENVIRONMENT! Take care to dispose of this

More information

1.1 Instructions for the o-led Display/Controller

1.1 Instructions for the o-led Display/Controller 1.1 Instructions for the o-led Display/Controller The Marvair o-led digital display/controller operates on board reverse cycle air conditioning equipment to provide room temperature control and humidity

More information

EQUIPMENT PRE-STARTUP AND STARTUP CHECKLIST TEL NO: ORDER NO: CONTRACT NO:

EQUIPMENT PRE-STARTUP AND STARTUP CHECKLIST TEL NO: ORDER NO: CONTRACT NO: Supersedes: (316) Form QTC4-CL2 (617) MODEL QTC4 EQUIPMENT PRE-STARTUP AND STARTUP CHECKLIST CUSTOMER: ADDRESS: PHONE: JOB NAME: LOCATION: CUSTOMER ORDER NO: TEL NO: ORDER NO: CONTRACT NO: CHILLER MODEL

More information

Spa Touch Control Panel with BP2100, BP6013 spa controllers. (Spa Owner s Manual insert)

Spa Touch Control Panel with BP2100, BP6013 spa controllers. (Spa Owner s Manual insert) Spa Touch Control Panel with BP2100, BP6013 spa controllers. (Spa Owner s Manual insert) P.N. 7876C (export) February 12, 2015 For Spas equipped with BP2100, BP6013 controllers and Spa Touch panel. Spa

More information

CWS AIR-CONDITIONERS

CWS AIR-CONDITIONERS CWS AIR-CONDITIONERS MODUL & MODUL XL INSTALLATION, OPERATION AND MAINTENANCE MANUAL MODUL_GB_2007.doc page 1 of 28 10/04/07 CWS air-conditioners 1 - Installation CONTENTS 1 Installation 2 Commissioning

More information

OWNER S MANUAL. Evaporative Cooler. (English) (EXH, EZH) ILL239-D ILL1140-A FAN SPEED REMOTE CONTROL ECONOMY

OWNER S MANUAL. Evaporative Cooler. (English) (EXH, EZH) ILL239-D ILL1140-A FAN SPEED REMOTE CONTROL ECONOMY OWNER S MANUAL Evaporative Cooler REMOTE CONTROL AUTO COOL FAN SPEED PM ECONOMY ILL239-D ILL1140-A (English) (EXH, EZH) Introduction...4 Remote Thermostat Control...5 Wall Mounted Thermostat Control...11

More information

Installation & Operators Manual

Installation & Operators Manual Installation & Operators Manual Eco, Hydro and Duo under counter range Part number 902.0011 Revision A Installation and Operation instructions For Classeq under counter range of glass and dishwashers.

More information

T-Series Air Conditioner T53 Model

T-Series Air Conditioner T53 Model INSTRUCTION MANUAL T-Series Air Conditioner T53 Model Protecting Electronics. Exceeding Expectations. McLean Cooling Technology 11611 Business Park Blvd N Champlin, MN 55316 USA Tel 763-323-8200 Fax 763-576-3200

More information

Tempco PCT-3000 Series Temperature Control Console with Relay Output for Heating or Cooling Applications

Tempco PCT-3000 Series Temperature Control Console with Relay Output for Heating or Cooling Applications Instruction Manual Tempco PCT-3000 Series Temperature Control Console with Relay Output for Heating or Cooling Applications Manual PCT-3000 Revision 9/2014 The PCT-3000 series control console incorporates

More information

TECHNICAL, OPERATING & INSTALLATION MANUAL TC 15, 33, 52 AIR COOLED PACKAGED WATER CHILLERS

TECHNICAL, OPERATING & INSTALLATION MANUAL TC 15, 33, 52 AIR COOLED PACKAGED WATER CHILLERS TC SERIES OPTIONS TECHNICAL, OPERATING & INSTALLATION MANUAL TC 15,, 5 AIR COOLED PACKAGED WATER CHILLERS CONTENTS EQUIPMENT AND COMPONENT DETAILS PERFORMANCE AND TECHNICAL DATA SCHEMATIC FLOW & SYSTEM

More information

Peacock Salt. Multisol Pro VA Operation & Training Manual

Peacock Salt. Multisol Pro VA Operation & Training Manual Multisol Pro VA Operation & Training Manual Peacock Salt CONTENTS PAGE 1. Saturator Tank Diagram 2 2. Saturator Cabinet Diagram 3 3. Saturator Function 4 4. Inlet water 5. Adding Salt 6. Producing Brine

More information

B900/ BME900/ SKOPE Gen2: Two Door Chiller

B900/ BME900/ SKOPE Gen2: Two Door Chiller B900/1100-2 BME900/1100-2 SKOPE Gen2: Two Door Chiller MAN1289 Rev. 5.1 Aug. 2013 B900/1100-2 BME900/1100-2 SKOPE Gen2: Two Door Chiller Type: B900-2 B90BD B1100-2 B39BD/B39SB BME900-2 E90BD BME1100-2

More information