Roof top SPACE RPC 315Z R407C MA00

Size: px

Start display at page:

Download "Roof top SPACE RPC 315Z R407C MA00"

Hilda Johnston
5 years ago
Views:

1 Client : TIHE SERV Contact : Romeo Staicu Your reference : Your contact : Phone : Page : 1 / 6 Roof top SPACE RPC 315Z R407C MA00 Independant roof mounted unit, cooling only, ready to be installed, designed for air conditioning of large volumes for industrial or commercial use. As per Brochure N 99.09B MA version : Motorized fresh air introduction register for "free cooling operation + recovery axial fan and extraction register for "room overpressure" control. Total cooling capacity : 82.5 kw Mixing temperature DB/HR : 28.9 C : 50 %(RH) External temperature : 35.0 C Heating capacity/gas burner : kw Discharge air flow Available static pressure Impeller rotation speed Refrigerant fluid Supply voltage PED 97/23/EC : m³/h : 35 mmwg : 800 rpm : R407C : 400V / 3ph 50Hz : Category II Description Quantity SPACE RPC 315Z R407C MA00 1 Temperature control - MRS2.2A 1 INCLUDED Stop Drop kit 1 INCLUDED Base with 100 Kw gas burner incorporated + air flow controller 1 INCLUDED MRS2.2A regulation 1 INCLUDED Assembly 00 1 INCLUDED High pressure equipment 1 INCLUDED As per our general sales conditions in your possession Validity of prices : 1 month Refrigerant information : CE N 2037/2000 (JO CE 29/09/2000) European Norm does not allowed HCFC use anymore for all EEC countries from : 01/01/2004

2 Page : 2 / 6 COMPLETE PERFORMANCES ROOF TOP SPACE RPC 315Z R407C MA00 Refrigerant fluid : R407C Number of refrigerant circuit(s) : 2 Number of hermetic compressor(s) : 2 Capacity control 2 stage(s) : % SUMMER OPERATION Total refrigerant output supplied : 82.5 kw Sensible refrigerant output supplied : 55.0 kw Total absorbed output : 35.3 kw Return air temperature db/hr : 25.0 C; 50.0 %(RH) Mixing temperature db/hr : 28.9 C; 50.0 %(RH) Discharge temperature db : 16.8 C External temperature : 35.0 C WINTER OPERATION Gas fired burner heating capacity : kw Air jet (French regul. ERP>70KW gas) : With Type of gas used : 20 mbar natural gas 2 speed burner : 0-50% - 100% AIR HANDLING UNIT Discharge air flow : m³/h Fresh air flow : m³/h Duct available static pressure : 35 mmwg Motor(s) absorbed power : 5.50 kw Fan rotation speed : 800 rpm Filter thickness : 25 Efficiency : G3 EXTERNAL SECTION Number of propeller fan(s) : 2 Air flow : m³/h Unitary motor power : 0.95 kw Rotation speed : 880 rpm Supply voltage : 400V / 3ph 50Hz Maximum nominal current (except electrical heater : 87.0 A Starting current : 173 A

3 Page : 3 / 6 SELECTED MOUNTED Recovery - Discharge Mx wy denomination I = Discharge R = Recovery E = Air extraction N = Fresh air MA : axial recovery fan; 3 dampers : Recovery/fresh/extracted air w : Recovery air direction (0 / 1) y : Discharge air direction (0 / 1) DIMENSIONS AND WEIGHT Length : 2,600 mm Width : 2,108 mm Height : 2,464 mm Empty weight : 1,660 kg Operating weight : 1,660 kg

4 Unit in accordance with directives : Machines (89/37 CEE modified) CEM (89/336 CEE) 92/31 CEE - 93/68 CEE 73/23 CEE 93/68CEE PED 97/23/EC : Category II Unit in accordance with norms : EN EN TECHNICAL DESCRIPTION ROOF TOP SPACE Page : 4 / 6 MAIN COMPONENTS Unit with propeller or Scroll hermetic compressor(s) (for the sizes 185& 376) MANEUROP Internal protection of windings Oil crankcase heater Thermostatic expansion valve Dryer Cycle reverse valve (IPC) Pressure pick-ups for HP and LP manometers Anticorrosion casing in galvanized sheet metal covered with polyester and varnish base lacquer Removable electrical panel and filter access panels External and internal coil with undulated aluminium fins and copper tube Centrifugal discharge fan driven by motor on adjustable seat and belts and pulleys transmission Propeller external fans ZIEHL6ABEGG with protection grilles Filters G3 (standard) with metal frame, M1 fire classification Main safety switch Protections offans and circuits by circuit breakers Electrical panel with wiring under channel, conform to norms NF C15100 and EN Acoustic cover(s) on compressor( s) Automatic rocking of condenser fan low speed to high speed as a function of the condensing pressure. AVAILABLE VERSIONS Version M0 : All recovery air operation MT version : Fixed fresh air introduction register MS version : Motorized fresh air introduction register for free cooling operation MA version : Motorized fresh air introduction register for free cooling operation + axial recovery fan and extraction register for room over-pressure control Version MC : Motorized fresh air introduction register for free cooling operation + recovery centrifugal fan and motorized extraction register for room overpressure control. CONTROL SYSTEM MRS2.2A Control Heating, cooling, free colling, extraction, air quality regulation Anti-short cycle Defrosting (IPC) Economizer (free cooling) by temperature or enthalpy comparison Discharge temperature control in cooling mode Anti-frost protection of premises Unoccupancy, setting lowering, shedding functions Communication Control and display panel visible from outside by a port hole Access to parameters

5 Page : 5 / 6 Settings modification Controls, run-stop, heating, cooling Permanent display of air temperature Visualization via red, green and orange display lights of all the fault and operating status Lamps test Available remote controls terminal box Run-Stop Unoccupancy Drift of settings Cooling, heating Shedding Teledisplay terminal box Main faults Filters fouling Other characteristics Faults memorization in case of cut supply Anti-lightening protection AVAILABLE MRS OPTIONS (cf if options retained page 2 or 3 of the offer) Temperature comparison : free cooling operation by temperature comparison Enthalpy comparison : free cooling operation by enthalpy comparison Room air quality sensor : Fresh air introduction modulation as a function of CO2 ratio in the room (not compatible with the enthalpy comparison option) Duct air quality sensor : Modulation of fresh air introduction as a function of CO2 ratio at intake (not compatible with enthalpy comparison option) Remote control kit : Control can be carried off course up to 1200 m and will allow : Run/Stop. Visualization of the operating status Temperatures reading at intake or in the room and setting modification Room sensor kit : positioned in the room, it replaces the sensor mounted at intake Programming clock : it allows a daily an weekly programming of the air conditioner operation CHARACTERISTICS OF EQUIPMENTS KIT "Stop Drop" ON FRESH AIR INTRODUCTION (Delivered separately and to be mounted on site). Depending on the siting place of the unit this kit will allow, simultaneously, a pre-filtration of the fresh air and will prevent a water infiltration due to fog or rain. HIGH PRESSURE EQUIPMENT (factory mounted) This equipment permits a fan operation for non standard zones (bigger size transmission and motor). GAS BASE Base with integral gas fired burner, adaptable on the SPACE roof tops with vertical discharge (sizes 155 to 960). High efficiency atmospheric burner Easy to install. Adjustable to the roof slope - Except models ERP with air jet - Construction : Thick galvanized steel with double wall insulation on discharge compartment. Operation with natural gas G20 or G25 (20 mbar) or Propane (37 mbar)

6 2 speeds 50 or 100% EC certification Electronic lighting Valve and safety pressostat integrated Supplies : propane kit; nuts and bolts + gaskets, users' brochure. Not supplied : gas regulator Page : 6 / 6 Unit delivered in operating order, settings and tests made in factory before delivery. Design and manufacture following ISO 9001 certification

Roof top SPACE RPC 450Z R407C M011

Roof top SPACE RPC 450Z R407C M011 Page : 1 / 5 Independant roof mounted unit, cooling only, ready to be installed, designed for air conditioning of large volumes for industrial or commercial use. As per