Part No Revised November / Instruction Manual Model #8150 AND #8151

Size: px

Start display at page:

Download "Part No Revised November / Instruction Manual Model #8150 AND #8151"

Job Miles
5 years ago
Views:

1 Part No Revised November / 8151 Instruction Manual Model #8150 AND #8151

2 SAFETY PRECAUTIONS

3 8150 AND 8151 INSTALLATION FORWARD This manual covers the model # 8150 and 8151 front loading steamers You can be very proud of your 8150 and 8151 steamer. In addition to being an attractive "eye catcher", it contains various engineering innovations which make it the leader in the industry. The exterior of the machine is designed and built-up to present an attractive appearance for many years. FRONT LOAD STEAMER INSTALLATION CHECKING SHIPMENT Unpack the shipping crate and check thoroughly for any damage which may have occurred in transit. Any claims should be filed immediately with the transportation company. ELECTRICAL REQUIREMENTS Voltage for your warmer is 120 Volt, 60 Cycle, single phase. The 8150 will draw a maximum of 5.8 amps and the 8151 a maximum of 8.5 amps. Your electrician must furnish sufficient current for the proper operation of your machine. We recommend that this machine be fused on a line by itself. The switches and controls which operate the warmer are located on the top front of the machine. NOTE: These instructions apply to all machines manufactured after 4/1/1975 and supercedes any sticker or wiring instructions you may have received. Failure to wire properly will void the warranty and can result in damage to the blower, heat element, lights, etc. 3

4 8150 AND AND 8151 FRONT LOAD STEAMER OPERATING INSTRUCTIONS CONTROLS AND THEIR FUNCTIONS HEAT CONTROL Infinite heat control w/ off position. Controls the amount of heat going to the water pan to generate steam. PILOT LIGHT Gives you a positive indication that the heat element is on. Since these machines use an infinite heat control, the element may not be on all the time. The pilot light tells you when the element is operating. EASY STEPS FOR USING UNIT 1. Prepare Steamer for operation a. Fill the water pan with warm water (up to 4 quarts for the 8150 and up to 6 quarts for the 8151) b. Place Hood on top of water pan. c. Insert hot dog and bun trays and divider. d. Place steam vents in slots provided. e. Turn heat control to HIGH position f. Place up to 30 hot dogs (8150) or 45 hotdogs (8151) in hot dog side of hood and cook for 45 minutes. BE SURE TO ARRANGE HOT DOGS LOOSLEY TO ALLOW STEAM CIRCULATE FREELY BETWEEN EACH OF THEM. g. At end of 45 minutes place 20 more dogs (8150) or 30 more dogs (8151) in hot dog side and cook for 30 more minutes. h. Place several buns in the bun side of the cabinet. Place buns as needed. This is a highly efficient steam generator. Leaving buns in too long will result in soggy buns. 4

8150 and 8151 CARE AND CLEANING The stainless steel body of the Steamer is easy to keep clean. Usually a damp cloth will remove all dirt and grease spots.

Unplug steamer 2. Take hood off of steamer. 3. Empty water pan. 4. Remove all interior components. ( bun trays, hot dog tray, divider and door ) 5.

5 8150 and 8151 CARE AND CLEANING The stainless steel body of the Steamer is easy to keep clean. Usually a damp cloth will remove all dirt and grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean and sparkling. Remember the inside of the glass must be cleaned too. 1. Unplug steamer 2. Take hood off of steamer. 3. Empty water pan. 4. Remove all interior components. ( bun trays, hot dog tray, divider and door ) 5. Wash all interior parts as well as hood and door and water pan as necessary with soap and water. 6. Clean bottom portion of unit with damp cloth and dry. MAINTENANCE INSTRUCTIONS 5

6 8150 and 8151 ORDERING SPARE PARTS 1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list. 2. When ordering, please include part number, part name, and quantity desired. 3. Please include your model name and machine serial number (located on the machine nameplate) with your order. 1. Address all parts orders to: Parts Department Gold Medal Products Co Medallion Drive Cincinnati, Ohio or, place orders at: (513) (800) Fax: (513)

7 8150 and 8151 PARTS LIST FRONT LOAD STEAMER Model # Item Part Part No. No. No. Description Quantity Lead-in Cord Oven Heat Element 700 Watt Oven Heat Element 785 Watt Heat Control Pilot Light Hot Dog Tray Bun Tray Bun Platform Divider Water Pan Hood Weldment Control Box Weldment Element Tray Heat Sinks Bottom Plate Body Weldment High Limit High Limit Bracket Small Insulation Pad Insulation Mat Door Hinge Door Handle Door Glass Element Clamps Reflector Plate Hinge Pin Hinge Knobs Cover Slides Control Knobs Control Label 1 7

8 LOWER CONTROL CABINET WIRING IS #16AWG MGT, CSA STYLE A-24, 26/30 STRAND TYPE A NICKLE WIRING DIAGRAM FOR 8150 and 8151 Front Load Steamer 8

9 8150 and 8151 WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any defective part for a period of six (6) months from the date of sale to the Original Purchaser with regard to labor and two (2) years with regard to parts and does not cover damage to the equipment caused by accident, alteration, improper use, voltage, abuse, or failure to follow instructions. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIP-TION ON THE FACE HEREOF. We neither assume, nor authorize any other person to assume for us, any other obligation or liability in connection with the sale of said GOLD MEDAL equipment or any part thereof. The term Original Purchaser as used in this warranty shall be deemed to mean that person, firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS COMPANY, or their authorized distributor for the equipment. THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIP-MENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR REPLACEMENT OF PARTS. NOTE: This equipment is manufactured and sold for commercial use only. 9

Instruction Manual. Part No Revised September 2004

Instruction Manual. Part No Revised September 2004 5554 Instruction Manual Part No. 39792 Revised September 2004 SAFETY PRECAUTIONS INSTALLATION FORWARD This manual covers the model # 5554 PIZZA OVEN. You can be very proud of your 5554 PIZZA OVEN. In addition