DNJ SERIES PUMPS END SUCTION CLOSE COUPLED

Size: px
Start display at page:

Download "DNJ SERIES PUMPS END SUCTION CLOSE COUPLED"

Transcription

1 DNJ SERIES PUMPS END SUCTION CLOSE COUPLED

2 DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards developed by the Hydraulic Institute (HI) and the National Electrical Manufacturers Association (NEMA). APPLICATIONS: DNJ Series Pumps are designed for applications in medium duty service, in heating and air conditioning, booster and general circulating services. SPECIFICATIONS: Capacities - Up to 2300 GPM Pressure - Up to 75 PSI Temperature - From 32 F to 200 F Liquids - Water and Light Hydrocarbons Head - Up to 400 Feet Horsepower - Up to 00 HP Drives - NEMA JM Motors Materials - Cast Iron, Bronze, Stainless Steel FEATURES: DNJ Series Pumps are available in cast iron bronze tted and all iron Materials of Construction (MOC) Pump casing is tted with a bronze replaceable wear ring. Motor bearings are grease lubricated and are sized for a minimum of 20,000 hours L0 basic rating life or 00,000 hours median bearing life. The motor/impeller shaft is protected with a replaceable (bronze) sleeve installed between the shaft and mechanical seal. Mechanical seals with face type ceramic seat, carbon washer, stainless steel metal parts and Buna elastomers are designed for water service and light hydrocarbons up to 200 F. Rotech DN Series Pumps are supplied with enclosed dynamically balanced impellers for smooth, low vibration operation. DNJ SERIES PUMPS: DNJ Pumps are furnished with enclosed dynamically balanced implellers for smooth, low vibration operation. DNJ Series pump designed tough, versatile products to meet your pumping needs. DNJ Series pump delivers variety, durability, standardized options and con gurations. Please contact us to nd out more about DNJ Series options & prices.

3 HYDRAULIC COVERAGE 400 Selection Chart 800 RPM HEAD - FEET FLOW - U.S.G.P.M Selection Chart 3600 RPM HEAD - FEET FLOW - U.S.G.P.M

4 EXPLODED VIEW ITEM QUANTITY PART DESCRIPTION MATERIAL JM Motor Cast Iron / Aluminium 2 Key Steel 3 Slinger Rubber 4 Shaft Sleeve Bronze or Stainless Steel 5 Adaptor Cast Iron 6 4 Bolt Carbon Steel 7 4 Nut Carbon Steel 8 Mechanical Seal Car / Cer / NBR as normal 9 8 Bolt or Stud Carbon Steel 0 Impeller C.I / Bronze / Stainless Steel Impeller Nut Carbon Steel 2 Spring Washer Stainless Steel 3 Hex Pocket Head Bolt Carbon Steel 4 O-Ring NBR 5 or 2 Wear Ring C.I / Bronze / Stainless Steel 6 Pump Casing Carbon Steel 7 2 Plug Carbon Steel Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) sales@windsorpump.com Dan Kurtz Phone: -(226) Fax: -(905) dan@windsorpump.com Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905) peter@windsorpump.com

5

6

7

8

9

10

11

12 Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) Dan Kurtz Phone: -(226) Fax: -(905) Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905)

13

14

15

16

17

18

19

20 Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) Dan Kurtz Phone: -(226) Fax: -(905) Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905)

21 DN SERIES PUMPS END SUCTION FRAME MOUNTED

22 DN SERIES PUMPS These are general purpose, frame mounted end suction pumps exibly coupled to drivers. Each entire unit can be mounted on a common base plate. APPLICATIONS: DN Series pumps are designed for applications in medium duty service, providing maximum pump value in heating and air conditioning, booster and general circulating services. SPECIFICATIONS: Capacities - Up to 3000 GPM Pressure - Up to 75 psi Temperature - From 32 F to 200 F Liquids - Water and Light hydrocarbons Head - Up to 400 feet Horsepower - Up to 200 hp Drives - Electric Motors Materials - Cast Iron, Bronze, Stainless Steel FEATURES: DN Series Pumps are available in cast iron bronze tted and all iron Materials of Construction Pump casing is tted with a bronze / cast iron replaceable wear ring. Motor bearings are grease lubricated and are sized for a minimum of 20,000 hours L0 basic rating life or,00,00 hours median bearing life. The motor / impeller shaft is protected with a replaceable sleeve installed between the shaft and mechanical seal. Mechanical seals with face type ceramic seat, carbon washer, stainless steel metal parts and Buna elastomers are designed for water service and light hydrocarbons up to 200 F. DN Series Pumps are supplied with enclosed dynamically balanced impellers for smooth, low vibration operation.

23 HYDRAULIC COVERAGE 400 Selection Chart 800 RPM HEAD - FEET FLOW - U.S.G.P.M Selection Chart 3600 RPM HEAD - FEET FLOW - U.S.G.P.M

24 EXPLODED VIEW 7 8/ B 8/ A / 27/ B C / A PART # PART DESCRIPTION Plug 2 Pump Casing 3 Casing Wear Ring 4 Casing O-Ring 5 Impeller Nut 6 Spring Washer 7 Impeller 8A Shaft Sleeve 8B Abutment Ring 9 Mechanical Seal 0 Casing Cover Slinger Inboard Bearing Cover Inboard Lip Seal Gasket Stud PART # C 27B 27A PART DESCRIPTION Bolt Inboard Bearing Bearing Housing Shaft Sleeve O-Ring Key Shaft Shaft Outboard Bearing Outboard Lip Seal Outboard Bearing Cover Nut Rear Foot Support Flat Washer Spring Washer Bolt Bolt Grease Nipple Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) sales@windsorpump.com Dan Kurtz Phone: -(226) Fax: -(905) dan@windsorpump.com Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905) peter@windsorpump.com

25

26

27

28 Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) Dan Kurtz Phone: -(226) Fax: -(905) Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905)

29

30

31

32 Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) Dan Kurtz Phone: -(226) Fax: -(905) Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905)

33 RVI 80 SERIES Vertical Inline Pumps

34 RVI80 SERIES VERTICAL INLINE PUMPS Vertical Inline Pumps are close coupled pumps designed for easy installation and can be mounted to a pipe line. The Suction and Discharge connections are on the same center line in opposite direction at 80 apart. DESIGN FEATURES Easy to install without disturbing piping. Close coupled pumps, eliminates needs for extra Space, Rigid base or alignment. Can be installed vertically or Horizontally. Impeller is mounted on motor shaft, minimizes run out. Pump Adaptors are interchangeable with same series of pump sizes. Pumps are supplied with mechanical seals. Flush line provided for the cooling of seal faces. MAJOR APPLICATIONS Heating and Air conditioning. Pressure Boosting systems. Apartment building. Industrial Process Systems. General Circulating water services. EXPLODED VIEW ITEM QTY PART NAME Pump Casing Impeller Adaptor Motor Shaft sleeve Slinger Mechanical, Seal, Stationery Mechanical, Seal Rotary Gasket Plug Impeller, Screw Impeller, Washer Bolt MATERIAL Cast Iron C.I. / Bronze / Stainless Steel Cast Iron Var Bronze or Stainless Steel Rubber Ceramic / EPDM cupset as standard Carbon/EPDM Stainless retainer & spring as standard Non Asbesters Steel Steel Brass Steel 9 0

35 Space required for DIS-Mantling V Q Suction Guage Tapping Discharge A X, Ø Y Holes on Z PCD EQ.SP. N N M Dimensions - Inches (mm) B S U T W Volute base ring Tapped for./ 25# ANSI Flange to support pump PUMP DIMENSIONAL DATA SIZE /2x /2-7 2x2-7 2 /2x2 /2-7 3x3-7 4x4-7 25# ANSI A B 250# ANSI 25# ANSI 250# ANSI N M W U S T A B X Y Z X Y Z 5 9/6 6 /8 3/6 8 (203) 6 (406) 6 5/8 6 /2 7/8 8 /2 (26) 7 (432) 4-3/4 (2) 5 /4 (33) 7 /6 7 /2 9 (229) 8 (457) 5 (27) 7 /2 3/4 8 /4 /8 9 5/6 0 /4 9 /2 (24) 0 /2 (267) 9 (483) 2 (533) 5 /4 (33) 6 3/4 (7) 4-5/8 (7) 4-3/4 (2) 5 5/8 (43) 6 /4 (59) 5 /4 (40) 4 3/8 () 4 7/8 (24) 5 /4 (33) 5 /2 (40) 6 3/8 (62) 9 3/8 (238) 0 (254) 0 5/8 (270) /2 (292) 2 /4 (3) 3 7/8 (98) 4 7/8 (24) 5 /2 (40) (52) 4 7 /2 (90) 8 5/8 (4) 3/4 (9) 3/4 (9) 3/4 (9) 3/4 (9) 4 /2 (4) 4 5 (27) 8 5 7/8 (49) 6 5/8 (68) 7 7/8 (200) /8 (22) 3/4 (9) 7/8 (22) 7/8 (22) 7/8 (22) S (max)* /2 (38) /2 (38) /2 (38) /2 (38) /2 (38) X-PCD Y - NO. OF HOLES Z - DIAMETER OF HOLES MOTOR DIMENSIONS MOTOR FRAME Q (max) V 43JM (255) 7 (78) 45JM.045 (280) 7 (78) 82JM.738 (298) (222) 84JM (324) (222) 23JM 4.42 (366) 2.65 (309) MOTOR FRAME Q (max) V 25JM 5.96 (404) 2.65 (309) 254JM 9.2 (485) (32) 256JM (530) (32) 284JM (556) (355) 256JP (530) (32) ITEM /2x /2-7 2x2-7 2 /2x2 /2-7 3x3-7 4x4-7 43JM 54JM 82JM 84JM 23JM 25JM 254JM 256JM 284JM 256JP R P R P R P R P R P R P R P R P R P R P 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 9.05 (7) 9.55 (497) 20.7 (52) (520) /8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) (50) (522) 2.7 (540) 2.42 (545) (573) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) (527) 2.24 (540) 2.86 (555) 22. (562) (590) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) 2.76 (553) (565) (852) 23.4 (588) (66) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) (595) (608) (625) (630) (658) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) (633) (645) (660) (668) (696) /2 (26) 8-3/4 (222) 8-3/4 (222) 9 (229) (825) 33.2 (840) (848) (876) (229) (920) 9 (229) (947) 8-/2 (26) (858) 8-3/ (222.4) (872) 8-3/4 (222.4) 34.8 (884) 8-3/ (222.4) (892) 9 (229) (920)

36 OTHER PRODUCTS DNJ Series End Suction Close Coupled Pumps DN Series End Suction Frame Mounted Pumps 96 Series ANSI Chemical Process Pumps 96LF series Low Flow ANSI Pumps 296 Series ANSI Close Coupled Pumps 796 Series ANSI Self Priming Pumps RCP Series End Suction Pumps RST Series Stainless Stamped End Suction Pumps RVMS Series Vertical Multistage Centrifugal Pumps SPT/SPU Series Self Priming Trash Pumps SCP/SFP Series Self Priming Pumps S00 Series Sanitary Centrifugal Pumps L00 Series Lobe Pumps RDSL Series Horizontal Multistage Centrifugal Pumps 300 Series NPT & 500 Series Flanged Ball Check Valves Various Mechanical Seals Apart from the listed above, we offer an array of other products too. Contact us for further details. Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) Fax: -(59) Dan Kurtz Phone: -(226) Fax: -(905) Sales and Engineering Peter Kurtz Phone: -(905) Fax: -(905)

3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet

3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet 3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

FLANGE-MOUNT CENTRIFUGAL PUMPS

FLANGE-MOUNT CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications

More information

Full-line Product Overview

Full-line Product Overview Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available

More information

GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM

GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general

More information

Dean Pump High Temperature Chemical Process Inline Pumps

Dean Pump High Temperature Chemical Process Inline Pumps Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet

More information

MARLOW PUMPS RECIRCULATION

MARLOW PUMPS RECIRCULATION End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features

More information

J SERIES. Technical Specifications. Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps. Features

J SERIES. Technical Specifications. Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps. Features Steam Traps Condensate Boiler Feed Valves Strainers Pumps J SERIES Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps Technical Specifications The Sterlco J Series Centrifugal Pumps are designed

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS 0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.

More information

DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP

DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range

More information

End-Suction Centrifugal Pump

End-Suction Centrifugal Pump GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM

More information

End-Suction Centrifugal Pump

End-Suction Centrifugal Pump GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM

More information

D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.

D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

CAST IRON IMPELLER B4JRMBH. TYPE B SINGLE STAGE CENTRIFUGAL PUMP Bearing Frame Mount TABLE I

CAST IRON IMPELLER B4JRMBH. TYPE B SINGLE STAGE CENTRIFUGAL PUMP Bearing Frame Mount TABLE I Page 90. Date January, 004 Supersedes //95 B4JRMBH Packing Construction 3 9 3 8 Volute Impeller B/M No. Rotation Case Impeller Diameter B3 CW H03843 L059 3.50 B33 CCW H03848 L0594 3.50 8 00 095 3 See Supplement

More information

380 Series Multi-Stage Centrifugal Pumps

380 Series Multi-Stage Centrifugal Pumps 380 Series Multi-Stage Centrifugal Pumps Flows to: 2,500 GPM Heads to: 2100 Feet Temperatures to: 500+ F TDH - Feet 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in

More information

B. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."

B. HI Compliance: Design, manufacture, and install pumps in accordance with HI Hydraulic Institute Standards. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

5. CONDENSATE PUMPS/UNITS

5. CONDENSATE PUMPS/UNITS INDEX Condensate Systems/Pumps GENERAL INFORMATION BURKS PARTS I&O MANUALS. CONDENSATE PUMPS/UNITS PUMP TYPES: GV GV6 USA: (937) 778-8947 Canada: (90) 47-6223 International: (937) 61-398 A 7/1 Condensate

More information

Industrial. Solutions brands you trust. Product Overview

Industrial. Solutions brands you trust. Product Overview Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications

More information

MODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS

MODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000

More information

1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide

1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide 1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide Installation Location! The pump should be located as close as possible to the liquid source so that the suction line can be as short and direct

More information

LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.

LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage. LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal

More information

PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016

PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016 SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.

More information

380 Series Multi-Stage Centrifugal Pumps

380 Series Multi-Stage Centrifugal Pumps 380 Series Multi-Stage Centrifugal Pumps Flows to: 4,800 GPM Heads to: 2100 Feet Temperatures to: 500 F TDH - Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in

More information

.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.

.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems. Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Water and Other.00

More information

Horizontal Split Case Pumps Type U

Horizontal Split Case Pumps Type U Horizontal Split Case Pumps Type U 7.1 7.2 Stage U Type Pumps Features: Axially Split Case Design Range from 20M 3 /Hr to 600M 3 /Hr Two Stage Pump Single Suction Twin Volute Casing Design Closed type

More information

KEENER GRINDER PUMPS

KEENER GRINDER PUMPS KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual

More information

ETP Series - Self Priming Pumps

ETP Series - Self Priming Pumps ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are

More information

MCV - MCH - MCHZ Multistage pumps

MCV - MCH - MCHZ Multistage pumps MCV - MCH - MCHZ Multistage pumps You can put pressure on them! We offer you a range of reliable high-pressure multistage pumps. It includes a series of horizontal pumps, MCH and a series of vertical pumps,

More information

SERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene

More information

SERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene

More information

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 Building Services Piping. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and

More information

MODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS

MODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600

More information

SERIES ES BASE MOUNTED TURBINE PUMPS

SERIES ES BASE MOUNTED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual

More information

CombiChem Centrifugal pumps. according to ISO 5199 and ISO 2858 / EN (DIN 24256)

CombiChem Centrifugal pumps. according to ISO 5199 and ISO 2858 / EN (DIN 24256) CombiChem Centrifugal pumps according to ISO 5199 and ISO 2858 / EN 22858 (DIN 225) CombiChem No limits to reliability! CombiChem is Johnson Pump s solution for liquid transport in the chemical industry.

More information

Unequaled I Unrivaled I Performance

Unequaled I Unrivaled I Performance Unequaled I Unrivaled I Performance Peerless Pump - 2005 Dr Martin Luther King Jr Street, Indianapolis, IN 46202 Ph: (317) 925-9661 fax: (317) 924-7388 www.peerlesspump.com www.epumpdoctor.com VERTICAL

More information

HTM Circulation Pumps acc. to DIN EN 733 Type NKX

HTM Circulation Pumps acc. to DIN EN 733 Type NKX HTM Circulation Pumps acc. to DIN EN 733 Type NKX General The new NKX pump line replaces our former heat transfer oil circulation pump type NKL s. The outer dimensions of both pump types are identical

More information

DESCRIPTION MAINTENANCE INSTALLATION OF NEW SEAL REMOVAL OF OLD SHAFT SEAL

DESCRIPTION MAINTENANCE INSTALLATION OF NEW SEAL REMOVAL OF OLD SHAFT SEAL Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service

SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service Vortex End Suction SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Food Processing Solids Waste Water Treatment Pollution Control Slurries Industrial Process

More information

568X, 587X, 588X Series

568X, 587X, 588X Series Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative

More information

TECHNICAL. Series 18. Pump Packages

TECHNICAL. Series 18. Pump Packages TECHNICAL S Y S T E M S Series 18 Pump Packages Series 18 Pump Packages Standard Features Close-coupled, end-suction, centrifugal pumps Mounted and wired pump starters Hand-Off-Auto switch for each pump

More information

SECTION STEAM CONDENSATE PUMPS

SECTION STEAM CONDENSATE PUMPS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable

More information

STAINLESS STEEL UNITS

STAINLESS STEEL UNITS Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

MSL A B A BK3 OS P AB

MSL A B A BK3 OS P AB Peerless Pump Company, LLC MSLA & MSMR Multistage Pump Selection SECTION 2920 Page 1 1. Select basic Pump size based on Hydraulics. (Use RAPID Version 6.2) 2. Review suction pressure 3. Look at Shut-Off

More information

POULTRY MARKET CATALOG

POULTRY MARKET CATALOG POULTRY MARKET CATALOG FW0134 0518 Supersedes 0714 Evaporative Cooling Pumps: 1-1/2 or 2 in. discharge Centrifugal Booster Pumps Pressure Booster Pumps Engineered Poultry Pumping Systems One year limited

More information

CombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)

CombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256) CombiChem Centrifugal pumps according to ISO 199 and ISO 88 / EN 88 (DIN 46) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal pumps

More information

CombiBloc Close-coupled centrifugal pumps

CombiBloc Close-coupled centrifugal pumps CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular

More information

489 & 490 Series CAST IRON UNITS BRONZE UNITS STAINLESS STEEL UNITS MAINTENANCE. Figure 1 - Mechanical Seal Replacement

489 & 490 Series CAST IRON UNITS BRONZE UNITS STAINLESS STEEL UNITS MAINTENANCE. Figure 1 - Mechanical Seal Replacement Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction

4VH and 4VHX. 4 Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction 4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation

More information

569, 570, 571, 572 Series

569, 570, 571, 572 Series Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and

More information

A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.

A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals. SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions. Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

Series SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec

Series SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30

More information

Worthington D-1100 vertical in-line pumps

Worthington D-1100 vertical in-line pumps New CENTRIFUGAL PUMPS 2014-4 Page 1 FEATURES D-1100 Worthington D-1100 vertical in-line pumps Sizes 1 to 60 hp, 800 gpm, 600 ft. 20E-20253 A standard in-line pump offering advanced design features for

More information

DUPLEX CONDENSATE TANK SYSTEM

DUPLEX CONDENSATE TANK SYSTEM DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM

More information

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions. Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. ASME/ANSI B73.1 Chemical Process Pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. ASME/ANSI B73.1 Chemical Process Pump N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide with innovation

More information

Family Curve. Submersible Grinder Pumps 1¼" and 2" Discharge. Effluent/Grinder Pumps.

Family Curve. Submersible Grinder Pumps 1¼ and 2 Discharge. Effluent/Grinder Pumps. Family Curve Submersible Grinder Pumps 1¼" and 2" Discharge 7 11/0 Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled Word File FILE: SPEC4 SCOPE: Furnish and install submersible grinder

More information

1900 Series In-Line Pump

1900 Series In-Line Pump Water Circulation Pumps & Circulators 1900 Series In-Line Pump HYDRONIC COMPONENTS & SYSTEMS Taco Catalog #: 300-1.4 Supersedes: 300-1.4 Dated: 06/15/95 Effective Date: 03/15/05 Printed in USA 2. Features

More information

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions. Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

REF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3.

REF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3. 4.4 SUPPLY PUMPAK ASSEMBLY NOTE: This section applies only to systems, which include a supply pumpak. Only the H6, XA, and XC series systems contain a supply pumpak. If your system is a single zone, H6

More information

569, 570, 571, 572 Series

569, 570, 571, 572 Series Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps

Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps Goulds Pumps Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail

More information

CR A-F-A-E-HQQE 3x400/ HZ

CR A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR32--2 A-F-A-E-HQQE 3x/69 5 HZ Grundfos pump 9612212 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9612212/cr-32--2-a-f-a-e-hqqe.html

More information

Wilo IL Vertical Split-Coupled Inline Pumps

Wilo IL Vertical Split-Coupled Inline Pumps Wilo IL Vertical Split-Coupled Inline Pumps Vertical Inline Split-Coupled, Single Stage Pumps March, 2013 Marcos D. Roimicher, Product Manager BS Market Segment, Product Management Department 120-08-002-0313

More information

Series 4302 & FILE NO: 43d.12 DATE: June 1, 2004 SUPERSEDES: 43d.12 DATE: July 15, dualarm Vertical In-Line Pumps

Series 4302 & FILE NO: 43d.12 DATE: June 1, 2004 SUPERSEDES: 43d.12 DATE: July 15, dualarm Vertical In-Line Pumps Series 0 & FILE NO: d. DATE: June, 00 SUPERSEDES: d. DATE: July, 00 dualarm Vertical In-Line Pumps dualarm Smart pumps for the commercial HVAC market Vertical In-Line pump, the best design for HVAC systems,

More information

EBARA. Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU

EBARA. Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU EBARA Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU water wastewater EBARA International Corporation Standard Pump Division S ubmersible Non-clog Pump Model DLFU DVFU DDLFU Features Watertight

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC N N O V A T I O N E F F I C I E N C Y Q U A L I T Y In-Line Pumps IIL / IVP / IVP-CC For more than 0 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping

More information

489G DESCRIPTION CAST IRON UNITS BRONZE UNITS 316 STAINLESS STEEL UNITS. Maintenance. General Safety Information for 12 Volt DC Power

489G DESCRIPTION CAST IRON UNITS BRONZE UNITS 316 STAINLESS STEEL UNITS. Maintenance. General Safety Information for 12 Volt DC Power Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:

DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date: DLKF A. General: Provide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services Horizontal Split Case For more than 6 years the name Ruhrpumpen

More information

Goulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps

Goulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units

More information

Goulds Large Capacity, Single Stage, Double Suction Pump

Goulds Large Capacity, Single Stage, Double Suction Pump Goulds 3498 Large Capacity, Single Stage, Double Suction Pump 3498 Double Suction Pumps Designed for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services Capacities to 8,00 m 3 /h

More information

dualarm Vertical In-Line Pumps

dualarm Vertical In-Line Pumps Series 430 & 438 dualarm Vertical In-Line Pumps FILE NO: 43d.1 DATE: Jan. 0, 010 SUPERSEDES: 43d.1 DATE: Sept., 008 Series 430 & 438 Smart pumps for the commercial HVAC market. Armstrong Vertical In-Line

More information

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.

More information

Goulds Trash Hog. Self-Priming Solids Handling Pumps

Goulds Trash Hog. Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures

More information

SECTION PLUMBING EQUIPMENT Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections.

SECTION PLUMBING EQUIPMENT Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections. SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15410 - Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections. 1.02 SUBMITTALS A. Submit properly identified

More information

Hoffman Specialty Pump Products

Hoffman Specialty Pump Products Condensate Units Boiler Feed Units Vacuum Heating Units Hoffman Specialty Pump Products S-0692C INDEX Condensate Return Units Series WC Series WCS Series SCC Boiler Feed Units Stock Watchman Condensate

More information

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate

More information

Technical Parameter: Suction Diameter: 40~250 mm Discharge Diameter: 25~200 mm

Technical Parameter: Suction Diameter: 40~250 mm Discharge Diameter: 25~200 mm HEGA Horizontal Multistage Pump Brief Introduction HEGAHorizontal Multistage Pump is the new multistage product series, the excellent hydraulic performance and structure of which have enabled low cost

More information

CR A-F-A-E-HQQE 3x400/ HZ

CR A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR45-12-2 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122818 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122818/cr-45-12-2-a-f-a-e-hqqe.html

More information

CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ

CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ GRUNDFOS DATA BOOKLET CR5-9 A-FGJ-A-E-HQQE 1x2/24 5HZ Grundfos Pump 96537532 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537532/cr-5-9-a-fgj-a-e-hqqe.html

More information

PENGUIN SERIES HSC PUMPS INTRODUCTION

PENGUIN SERIES HSC PUMPS INTRODUCTION PENGUIN Installation & Maintenance SERIES HSC PUMPS MODELS HSC-1/4 HSC-1/2 HSC-3/4 HSC-1 HSC-2 HSC-3 SEALS S - Single D - Double M - Single/Multi-Stage INTRODUCTION Penguin 316 stainless steel centrifugal

More information

FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS.

FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS. FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS History and Development Since the early part of this century, Fairbanks Nijhuis Pump has set industry standards in innovative

More information

CR20-07 A-F-A-E-HQQE 3x400/ HZ

CR20-07 A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR2-7 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 965513 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965513/cr-2-7-a-f-a-e-hqqe.html

More information

Model 6050-Series. PumpAgents.com - buy pumps and parts online SELF-PRIMING PUMPS. Model 6050-Series

Model 6050-Series. PumpAgents.com - buy pumps and parts online SELF-PRIMING PUMPS. Model 6050-Series PumpAgents.com - Click here for Pricing/Ordering Model 6050-Series SELF-PRIMING PUMPS FEATURES Body: Impeller: Shaft: Wearplate: Shaft Seal: Ports: Motor: Weight: Bronze Construction JABSCO Nitrile 316

More information

Intelligent Variable Speed Pump

Intelligent Variable Speed Pump IntelliFlo VS+SVRS Intelligent Variable Speed Pump The ONLY way to comply with new federal anti-body entrapment standards and save money There s simply no better way to add a Safety Vacuum Release System

More information

SSA Serie. Features. Model code. Applications. Performance Curves. Operation Conditions. Materials

SSA Serie. Features. Model code. Applications. Performance Curves. Operation Conditions. Materials The SSA series is an All-in-One self-priming silent booster pump, the compact design combined pressure tank, pressure switch, flow switch and full protection controller, moreover, the evolutional flow

More information

MECHANICAL SEAL REPLACEMENT UNPACKING MAINTENANCE. Figure 1 & 2 - Mechanical Seal Replacement

MECHANICAL SEAL REPLACEMENT UNPACKING MAINTENANCE. Figure 1 & 2 - Mechanical Seal Replacement Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

For calls outside the UK Telephone or Fax TETRA PAK PUMPS FREEPHONE: Centrifugal Pump Single Shaft Seal Type ALC-1

For calls outside the UK Telephone or Fax TETRA PAK PUMPS FREEPHONE: Centrifugal Pump Single Shaft Seal Type ALC-1 Centrifugal Pump Single Shaft Seal 2 Freephone lines are open between 8.00am and 5.30pm Monday to Friday FREEFAX: 0800 801404 TETRA PAK PUMPS Centrifugal Pump Single Shaft Seal Motors: 3000 r/min, 3-phase

More information

TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS

TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS PACO VSM/VSMS TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS Close and Split Coupled VERTICAL SPACE MISER Type VSM (Close Coupled) Type VSMS (Split Coupled) SMALL FOOTPRINT FOR TIGHT SPACES > Vertically mounted

More information

470 Series Stamped Stainless Steel Pumps

470 Series Stamped Stainless Steel Pumps 470 Series Stamped Stainless Steel Pumps Flows to: 1100 GPM Heads to: 2000 Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products steeped

More information

316 Stainless Steel Close- Coupled Self-Priming Flexible Impeller Pumps

316 Stainless Steel Close- Coupled Self-Priming Flexible Impeller Pumps Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

References are in agreement with UMRL dated April 2018 **************************************************************************

References are in agreement with UMRL dated April 2018 ************************************************************************** USACE / NAVFAC / AFCEC / NASA UFGS-23 21 23 (August 2017) ---------------------------- Preparing Activity: USACE Superseding UFGS-43 21 13 (January 2008) UFGS-43 21 39 (April 2008)) UNIFIED FACILITIES

More information