Cartridge Heaters. temperatures up to 450 C. heaters in difficult applications. 2. High impact ceramic cap retards HotRods are available in a wide

Size: px
Start display at page:

Download "Cartridge Heaters. temperatures up to 450 C. heaters in difficult applications. 2. High impact ceramic cap retards HotRods are available in a wide"

Transcription

1

2 HotRod Cartridge Heaters STANDARD The engineers at Marathon Heater have developed a cartridge heater that exceeds the performance and durability of other cartridge HOTROD heaters. Through refinements in the swaging process, specially designed cores, careful selection of magnesium oxide fill, FEATURES nickel chromium resistance wire, stainless steel tubing, and carefully controlled production processes, 1. High temperature lead wires for HotRods routinely outperform other cartridge temperatures up to 450 C. heaters in difficult applications. 2. High impact ceramic cap retards HotRods are available in a wide contamination and is suitable for high variety of diameters and vibration applications. Deep holes in cap prevent configurations. Choose from fraying of leads when bent. our large selection of stock heaters for 3. Nickel-chromium resistance wire for maximum heater life, immediate delivery evenly wound for even heat distribution. or let the engineers at Marathon Heater 4. High purity magnesium oxide fill selected for maximum dielectric strength design a unique and thermal conductivity, highly compacted for maximum heat transfer. heater for your special application. Standard stainless steel sheath for oxidation resistance in a wide variety of environments. manufacturing times are 316 stainless steel and Incoloy are also available. Please consult the application guide normally less than 2 weeks. in the back for help in determining which material is best for your application. 6. TIG welded end disc to prevent contamination and moisture absorption. Length tolerance is ±3/32 or ±3%, whichever is greater. HotRods are UL recognized, File #E and CSA certified, CSA file no. LR STANDARD SPECIFICATIONS Nominal Minimum Maximum Std. Lead Wire Max amps with Std. Max lead wire Maximum Maximum Volts Diameter Diameter Diameter Gauge Lead wire gauge amps 1/ mm / mm / mm mm mm / mm / / mm mm / mm / mm mm Camber tolerance is.025 per foot of length. Slight camber is not normally a problem since the heater will flex enough to enter a clean hole. Wattage tolerance is +5%, -10%. 2

3 OVERALL LENGTH Lead Arrangements HOTROD CONFIGURATIONS Swaged in Leads Swaged in leads are ideal for applications where there is a lot of movement or the leads must be bent sharply upon exiting the heater. Please note that for heaters over 3 long there is a short unheated section where the leads connect to the power pins. Also remember that if the heater is inserted completely into the hole, the leads are exposed to the block temperature (maximum o o temperature for standard leads is 450 C, 850 F). In heaters under 3 long, the leads go directly in to the core, resulting in an unheated section the length of the ceramic end piece. Heater Length Under 3 long Over 3 long Unheated Length at Lead End of Heater 1/4 5/16 3/8 1/2 5/8 3/ In heaters over 3 long the leads make a connection with the power pins in a short unheated section. Crimped on Leads Crimped on leads are generally used where the temperature at the end of the heater exceeds the maximum rated temperature of the lead wire. Since the connection between the leads and power pins is made outside the heater, the unheated length at the lead end of the heater is kept to a minimum. Crimped on leads are not recommended for applications where the leads must be bent sharply near the heater, or in applications where the leads will be subject to a lot of flexing. The high temperature connectors are covered by 1-1/2 of 2500 volt silicone rubber coated fiberglass sleeving. Post Terminals Post terminals (also called screw terminals or stud terminals) are used in applications where easy lead replacement is desirable. They work great with ring terminals or fork terminals. Post terminals are only available for heaters ½ diameter and up. Terminals are #6-32 and supplied with 2 stainless steel washers and 2 stainless steel nuts on each stud. 1 1/4 5/8 Right Angle Leads Right angle leads are ideal for applications where space is limited. Leads are covered with a silicon impregnated fiberglass sleeve where they exit the heater. When ordering, please specify the overall length. UNHEATED LENGTH EXTENSION Unheated Length at Lead End of Heater Heater Length 1/4 5/16 3/8 1/2 5/8 3/4 1 Under 3.5 long Over 3.5 long Extension Length Teflon Seal When an effective moisture or oil seal is needed, a swaged in teflon seal with teflon leads provides an effective barrier. Because it is necessary to keep the temperature of the teflon seal below 350 F, a 1" long unheated section is recommended. Standard lead gages apply. 1 UNHEATED 3

4 OVERALL LENGTH Silicone Rubber Seal A high temperature silicone rubber seal used with silicone rubber lead wires provides an effective moisture seal up to 400 F (200 C). It is generally the most impervious of the moisture seals. In order to protect the seal, a 1 unheated section is recommended. Epoxy Seal Epoxy potting forms a good moisture seal with more mechanical strength than a silicone rubber seal. Regular epoxy is rated at 350 F (177 C) and epoxylite is rated at 600 F (316 C). In order to protect the seal, a 1 unheated section is recommended. Swaged in Braid Swaged in stainless steel braid provides excellent abrasion protection while allowing the leads to be bent in a tight radius. Because the braid is swaged in, it is extremely resistant to pulling out of the heater. UNHEATED LENGTH Unheated Length at Lead End of Heater Heater Length 1/4 5/16 3/8 1/2 5/8 3/4 1 Under 3 long Over 3 long Right Angle Stainless Steel Braid Right angle stainless steel braid offers the same advantages as swaged in stainless steel braid but allows use in tight spaces. When ordering, please specify the overall length. UNHEATED LENGTH EXTENSION Unheated Length at Lead End of Heater Heater Length 1/4 5/16 3/8 1/2 5/8 3/4 1 Under 3.5 long Over 3.5 long Extension Length Stainless Steel Flexible Conduit Flexible conduit provides maximum lead protection from abrasion but can not be bent as sharply as stainless steel braid. Flexible conduit is swaged into the heater for maximum protection. (Flexible conduit is also known as armor or hose). UNHEATED LENGTH Unheated Length at Lead End of Heater. Heater Length 1/4 5/16 3/8 1/2 5/8 3/4 1 Under 3 long Over 3 long Conduit O.D Copper Coupler and Stainless Steel Flexible Conduit Flexible conduit can also be attached to the sheath with a copper coupler. This method can also be used to attach flexible conduit to stock heaters. 4

5 OVERALL LENGTH Right Angle Stainless Steel Conduit Right angle stainless steel conduit offers the sameadvantages as swaged in stainless steel conduit but allows use in tight spaces. When ordering, please specify the overall length. EXTENSION UNHEATED LENGTH Unheated Length at Lead End of Heater Heater Length 1/4 5/16 3/8 1/2 5/8 3/4 1 Under 3.5 long Over 3.5 long Extension Length Conduit O.D Copper Elbow and Stainless Steel Flexible Conduit Right angle flexible conduit can also be attached to the sheath with a copper elbow. This method can also be used to attach right angle flexible conduit to stock heaters. Hex Head Pipe Fittings Fittings are available in brass or stainless steel. Brass fittings are brazed on and stainless steel fittings can be either brazed or welded on. Please specify overall heater length and fitting material when ordering. Please consult the sheath suitability chart when ordering heaters for immersion applications. 1/4 5/16 3/8 1/2 5/8 3/4 1 NPT Thread Size 1/8 1/4 1/4 3/8 1/2 3/4 1 Fitting Length Hex Size 7/16 9/16 9/16 11/16 7/8 1-1/16 1-5/16 Double Ended Threaded NPT Fittings Double ended fittings are normally used when it is desirable to mount a box on an immersion heater. Fittings are available in stainless steel and brass. Please specify overall heater length when ordering. 1/4 5/16 3/8 1/2 5/8 3/4 1 NPT Thread Size 1/8 N/A 1/4 3/8 1/2 3/4 N/A Fitting Length.98 N/A N/A Flanges Hex Size 7/16 N/A 9/16 11/16 7/8 1-1/16 N/A Small flanges can be welded on the lead end of the heater. Flanges can be used to hold a heater in place to prevent backing out during operation. Flanges also assist in heater removal. Flanges are 1/16" thick. Flange Dimensions Flange OD 1 1-1/2 2 Can be used on 1/4, 5/16, 3/8, 1/2 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 1/2, 5/8, 3/4, 1 Hole Spacing 3/4 1-1/8 1-1/2 Hole Size

6 Locating Ring Locating rings are used to position the heater and keep it from entering too far into the hole. Unless otherwise specified, the ring will be located 1/4 from the end of the heater. Thermocouples Type J and type K thermocouples can be installed to monitor part temperatures. A thermocouple mounted against the heater sheath in the center of the heater gives a good approximation of block temperature, especially when there is a good fit between the heater and the block. A thermocouple mounted in the tip is useful for monitoring liquid temperatures, or material flowing past the end of the heater. Unless otherwise specified thermocouple leads will be the same length as the heater leads. Standard thermocouple wire insulation is teflon, other types are available upon request. Please specify thermocouple type when ordering. Distributed Wattage: Distributed wattage Hotrods (with a higher watt density on the ends than the rest of the heater) can be used to compensate for end losses in blocks. Distributed wattage Hotrods are available in all diameters. HOT WARM HOT Bent HotRod o o HotRods can bent at any angle from 10 to 120. Heaters must be bent in an unheated sectionand can be constructed with most of the other options shown in this catalog. Heater Dia. ¼ 5/16 3/8 ½ 5/8 ¾ 1 Min Bend Radius ½ ½ ½ ¾ 1 1-1/4 N.A. Min Cold Lth N.A. SJO Cord 2 conductor or 3 conductor SJO cord is available as a lead option for heaters 3/8" diameter and larger. On 3/8" and 1/2" dia heaters, the cord directly exits the heater. On 5/8" and larger diameters the cord is surrounded by epoxy where it exits the heater. Remember to allow 1 unheated at the end of the heater to keep from overheating the cord. Double Ended Heater HotRod cartridge heaters are also available with an electrical termination on each end. Heaters can be made with lead wires, straight pins, or screw terminals 6

7 Maximum Allowable Watt Density for Heating Metals Block Temperature in F Application Data Sheath Suitability Chart Clearance is determined by taking the hole diameter and subtracting the heater diameter. Watt density is calculated by: Wattage Heated Lth x Diameter x 3.14 Cycling reduces heater life and high cycling applications should use lower numbers. Staying below these values will result in increased heater life. 304 SS 316 SS Incoloy Max Watt Density Max Temp ( F) Air to 1500 F E E E Air to 1600 F G G E Air to 1800 F NR NR G Acetic Acid F G F Acetone E E E Alcohol F E E Asphalt E E E Caustic Soda, 10% E E E Degreasing Solution G E E Electroplating Bath, Cadmium E E E Electroplating Bath, Copper E E E Ethylene Glycol F F F 30 Freon E E E Glycerin E E E Kerosene E E E Molasses E E E Nitric Acid (30% max) F F NR Oil, SAE 30 E E E Oil, SAE 50 E E E Oil; Vegetable or Mineral E E E Paraffin or Wax E E E 16 Steam E E E Steam E E E Trichlorethylene F F F Water, Distilled E E E Water, Tap F E E E=Excellent, G=Good, F=Fair, NR=Not Recommended Maximum Watt Density in Still Air Air Temperature F Max Watts/in HotRod Sheath Temperature in 70 F Still Air Watt Density (watts/in 2 ) Oxidized Sheath Non-Oxidized Sheath Maximum HotRod Watt Density in 200 F Moving Air Air Velocity, Feet per Minute Air Direction Parallel to Heater Perpendicular to Heater Lead Wire Characteristics Wire Type UL Temperature Rating Maximum Recommended Temperature UL Style No. 300V UL Style No. 600V Comments Ultralead 250 C 450 C Excellent, durable wire, good for high temperature applications Teflon 250 C 250 C Good for areas where a small diameter wire is needed. Silicon Rubber 200 C 200 C Good moisture resistance Braided Silicon Rubber 200 C 200 C Inexpensive wire good for non abrasive applications MGT 450 C 450 C Good high temperature wire SJO cord 90 C 90 C Rubber jacket, resistant to oil and moisture. For use on 3/8 dia. and larger 7

8 Wire Diameters Wire Gauge 16 ga 18 ga 20 ga 22 ga 24 ga Conductor Diameter V Ultralead V Ultralead N/A 300 V Teflon V Teflon V Silicon Rubber N/A 300 V Braided Silicon Rubber N/A 300 V MGT N/A 600 V MGT N/A NON-SWAGED CARTRIDGE HEATERS For applications where a swaged heater is not required, non-swaged cartridge heaters offer a cost effective alternative. Non-swaged heaters can be used up to 45 w/in 2 and to temperatures up to 1200 F. Non-swaged heaters offer tighter length tolerances (±1/16 ) than swaged heaters. Non-swaged heaters can be built with 3 independent heat zones. Non swaged heaters are not recommended for applications where there is a lot of vibration or impact. Most of the lead configurations and options available for swaged Hotrod heaters are also available for non-swaged cartridge heaters. Consult your Marathon Heater agent for more information. 1) Standard leads are UL rated to 482 F and can be used up to 850 F. Leads are connected internally with nickel connectors. 2) High temperature cement filling protects leads and internal parts. Epoxy and silicone rubber are also available 3) Nickel-chromium resistance wire stretched evenly through out the heated length. 4) High purity MgO is vibratory filled into the heater for maximum heat transfer. 5) 304 stainless steel sheath for superior oxidation resistance. Welded end disc to prevent contamination and moisture absorption. Maximum Allowable Watt Density For Heating Metals Block Temperature in F Hole Clearance Clearance is determined by taking the hole diameter and subtracting the heater diameter. Watt density is calculated by: Wattage Heated Lth x Diameter x 3.14 Cycling reduces heater life and high cycling applications should use lower numbers. Staying below these values will result in increased heater life. Nominal Minimum Maximum Std. Lead Wire Max amps with Std. Max lead wire Maximum Maximum Volts Diameter Diameter Diameter Gauge Lead wire gauge amps 3/ Engineering Data Heat Losses From Oil or Paraffin Surfaces in 70 F Air (watts/in 2 ) Temp ( F) Heat Loss Heat Losses From Water Surfaces in 70 F Air (watts/in 2 ) Temp ( F) 40% Humidity 60% Humidity Heat Losses From Molten Metal Surfaces in 70 F Air (watts/in 2 ) Temp ( F) Heat Loss Heat Losses From Vertical Surfaces in 70 F Air (watts/in 2 ) Temp ( F) Oxidized Steel Oxidized Aluminum Multiply by 1.2 for top surfaces Multiply by 0.8 for bottom surfaces 8

9 Properties of Metals Material Technical Data Density lbs/in 3 Specific Heat Btu/lb/ o F Thermal Conductivity Btu-in/hr-fe 2 - o F Melting Point F Latent Heat of Fusion Btu/lb Aluminum Antimony 120 Brass Yellow Cadmium 636 Copper Gold Incoloy Inconel Iron, Cast Lead, solid Lead, Liquid Magnesium Molybdenum Monel Nickel Nichrome (80% NI-20% Cr) Platinum Silver Solder (50% Pb-50% Sn) Steel, mild Steel, Stainless Steel, Stainless Tantalum Tin, solid Tin, Liquid Titanium 99.0% Tungsten Type metal (85% Pb-15% Sb) Zinc Zirconium Properties of Non-Metallic Solids Thermal Expansion In/in/ o Fx10-6 Material Density lbs/in 3 Specific Heat Btu/lb/ o F Thermal Conductivity Btu-in/hr-fe 2 - o F Melting Point F Latent Heat of fusion in/in/ o F Thermal Expansion In/in/ Fx10-6 Asbestos cement board Asphalt Boron Nitride Brickwork Carbon Cellulose Acetate Glass Graphite Ice Mica Mgo (Compacted) Nylon Paper Paraffin Phenolic, general purpose Polyethylene Polystyrene Rubber Sand Steatite Sulfur Teflon Vinyl Wood, oak Properties of Gasses Gas 3 Density, lbs/ft Specific Heat Btu/lb/ o F Thermal Conductivity Btu-in/hr-ft 2 - o F Air at 80 degrees Air at 400 degrees Ammonia Argon Carbon dioxide Carbon monoxide Chlorine Helium Hydrogen Nitrogen Oxygen Sulphur dioxide Water vapor at 212 degrees F

10 Properties of Liquids Liquid Density lbs./ft 3 Specific Heat Btu/lb o F Thermal Conductivity Btu-in/hr-ft 2 - o F Boiling Point o F Heat of vaporization Btu/lb Acetic acid, 20% ** Alcohol (ethyl) Brine (25% NaCI)** Caustic Soda (18% NaOH)** Dowtherm A Freon psig Glycerine Hydrochloric acid 10% NaK (78%K) 46.2***.21*** Nitric acid, 7% Oils (petroleum) Paraffin (melted) Potassium (K) 44.6***.18*** Sodium (Na) 51.2***.30*** Sulfuric Acid 10% Therminol FR Turpentine Vegetable Oil Water *At or near room temperature ** Percent concentration by weight of H2O solution *** At 1000 degrees F Kilowatt-Hours Required to Heat Steel Lbs. Of Temperature Rise F Steel Kilowatt-Hours Required to Heat Water Amount of Liquid Temperature Rise F Cubic Ft Gallons Max Time, Hours Add 5% for uninsulated tanks. 10

11 Conversion Factors Work btu gm-cal watt-hr ft-lb Power btu/hr watts horsepower ft-lbs/min Heat Flux btu/hr-ft 2 - F/ft gm-cal/sec-cm 2 watts/cm 2 watts/in Thermal Conductivity btu/hr-ft 2 F/ft gm-cal/sec-cm 2 - C/cm watts/cm 2 - C/m kg-cal/hr-m 2 - C/m Coefficient of Heat Transfer btu/hr-ft 2 - F gm-cal/sec-cm 2 - C watts/cm 2 - C kg-cal/hr-m 2 - C Length cm meter km in ft mile x , , x x , Temperature Conversion Chart F C F C F C

12 Air Heaters Marathon manufactures a line of 1/2 diameter air heaters. These heaters are used extensively in the heat staking industry and for plastic welding. Temperature Controllers Marathon carries a variety of microprocessor based temperature controllers for all applications and price ranges. Mica Band Heaters Marathon manufactures mica band heaters and nozzle heaters in a variety of sizes and configurations. We also stock a large variety of nozzle heaters for immediate delivery. Thermocouples Type J and type K thermocouples are available with stainless braid or flexible stainless hose. Thermocouples can be terminated with a variety of connectors. MARATHON HEATER 808 Hackberry Lane HCR 3, Box 86E Del Rio, Texas (830) FAX (830)

HotRod CARTRIDGE HEATERS

HotRod CARTRIDGE HEATERS HotRod CARTRIDGE HEATERS C A R T R I D G E H E A T E R S Same day shipment on 1000 s of models! TODAY HEA T E RS Made in USA ÂÂCONSTRUCTION...3 ÂÂStandard specifications...3 ÂÂWatt Density...4 ÂÂsheath

More information

Cartridge Heaters. Metric FIREROD Cartridge. Applications and Technical Data

Cartridge Heaters. Metric FIREROD Cartridge. Applications and Technical Data W A T L O W The Watlow FIREROD not only set the industry standard for cartridge heaters, it continues making improvements in construction and design. Among those improvements is the metric FIREROD, a variation

More information

MEGAWAT * HIGH DENSITY CARTRIDGE HEATERS

MEGAWAT * HIGH DENSITY CARTRIDGE HEATERS MEGAWAT * HIGH DENSITY CARTRIDGE HEATERS MEGAWAT high-density cartridges are round tubular heaters with electrical terminations on one side. These dependable heaters are made to withstand tough industrial

More information

Cartridge/Insertion Heaters

Cartridge/Insertion Heaters Max. Operating Typical Max. Temperatures Watt Densities Cartridge/Insertion Heaters Sheath Materials F C W/in 2 W/cm 2 Page FIREROD Alloy 800 1400 760 400 62.0 Stainless steel 1000 538 400 62.0 9 High-Temperature

More information

Cartridge/Insertion Heaters

Cartridge/Insertion Heaters Max. Operating Typical Max. Temperatures Watt Densities Cartridge/Insertion Heaters Sheath Materials F C W/in 2 W/cm 2 Page FIREROD Alloy 800 1400 760 400 62.0 Stainless steel 1000 538 400 62.0 11 High-Temperature

More information

Cartridge Heaters. Components. Application Guidelines

Cartridge Heaters. Components. Application Guidelines Application Guidelines Up to 1.297" Dia. Up to 60" Lengths Up to 11,500 Watts 120 and 240 Volt Up to 1400 F Max. Working Temp. Modification Available to Fit Custom Applications Type CIR cartridge heaters

More information

STRAIGHT & FORMED TUBULAR HEATERS

STRAIGHT & FORMED TUBULAR HEATERS STRAIGHT & FORMED TUBULAR HEATERS Applications: FORMING MACHINES HEATING MOLDS & PLATENS IMMERSION INTO LIQUIDS RADIANT & CONVECTION HEATING EMBEDDED OR CAST INTO METAL Tubular heaters are the main heating

More information

Cartridge Heaters. Hi-Density Cartridge Heaters. Features. To order, call or shop online at omega.com SM

Cartridge Heaters. Hi-Density Cartridge Heaters. Features. To order, call or shop online at omega.com SM Hi-Density Cartridge Heaters * Features The standard termination for Hi-Density Cartridge Heaters is Type N, 254 mm (0") long nickel conductor lead wires externally connected to 32 mm ( 4") solid conductor

More information

Tubular Industrial Process

Tubular Industrial Process are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe. See

More information

C D E F. Tubular Industrial Process Circulation Heaters. Circulation Heaters. View Product

C D E F. Tubular Industrial Process Circulation Heaters. Circulation Heaters. View Product Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is immediately

More information

Unheated straight section Fast response time Choice of lead protection Longer heater life Higher watt densities Made to customer specifications

Unheated straight section Fast response time Choice of lead protection Longer heater life Higher watt densities Made to customer specifications Temperatures up to 800 F (982 C) Precise temperature control Choice of lead orientation Built-in type J or K Thermocouple Round, square and rectangular cable Rugged, durable construction MIGHTYBAND The

More information

Technical Information

Technical Information Watt Density & Heater Selection - Guidelines Understanding Watt Density Watt density (W/in ) is the heat flux emanating from each square inch of the effective heating area (heated surface) of the element.

More information

MARATHON HEATER. File # E Made in USA

MARATHON HEATER. File # E Made in USA MARATHON HEATER S I L I C O N E R U B B E R H E A T E R S File # E202904 Made in USA Wire wound Silicone Rubber Heaters Marathon Heater flexible heaters provide outstanding performance in applications

More information

Pipe Thread Heaters. Construction Features. Star Electric to Order Call " 2-1/2" Pipe Thread Heaters

Pipe Thread Heaters. Construction Features. Star Electric to Order Call  2-1/2 Pipe Thread Heaters Pipe Thread Heaters Construction Features " -/" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging hex, thread and riser assures reliability.

More information

B C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM

B C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM Ceramic Insulated A Reliable Heat Source with Seamless Stainless Steel Sheath Flat Surface Mounting Installations Used in Hundreds of Industrial and Commercial Heating Applications Typical Applications

More information

B C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM

B C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM Ceramic Insulated A Reliable Heat Source with Seamless Stainless Steel Sheath Flat Surface Mounting Installations Used in Hundreds of Industrial and Commercial Heating Applications Typical Applications

More information

Checklist Selecting the Proper Flanged Heater

Checklist Selecting the Proper Flanged Heater are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe. See

More information

Tubular Heaters Introduction. Tubular Heater Introduction. Design Guidelines. View Product

Tubular Heaters Introduction. Tubular Heater Introduction. Design Guidelines. View Product Table Of Contents Pictorial Index....................... A-24 Tubular Heater Introduction and Specifications..................... 10-2 Tubular Heater Terminations........... 10-4 Tubular Heater Mounting

More information

COIL AND CABLE HEATERS. Mightyband Cable Heaters Tempco-Pak Cable Heaters

COIL AND CABLE HEATERS. Mightyband Cable Heaters Tempco-Pak Cable Heaters Mightyband Cable Heaters...5-2 Tempco-Pak Cable Heaters...5-0 Tempco Replacement Heaters for OEM Runnerless Molding Systems...5-4 SECTION COIL AND CABLE HEATERS Design Features Temperatures up to 800 F

More information

10-14 SECTION TUBULAR HEATERS

10-14 SECTION TUBULAR HEATERS Tubular Heater Specifications...10-2 Tubular Heater Terminations...10-4 Tubular Heater Mounting...10-5 Tubular Heater Moisture Seals...10-7 Standard Sizes and atings...10-8 Typical Bend Formations...10-10

More information

Nominal Diameter mm (in) mm (in) mm (in) mm (in) mm (in) mm (in)

Nominal Diameter mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) METRIC SIZES CARTRIDGE HEATERS Standard Specifications and Tolerances of Hi-Density Cartridge Heaters in Metric sizes. If tighter tolerances are required consult Tempco. LEAD LENGTH TOLERANCE Up to 1000

More information

Flanged Immersion Heaters

Flanged Immersion Heaters Flanged Immersion Heaters Are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating

More information

SCREW PLUG IMMERSION HEATERS

SCREW PLUG IMMERSION HEATERS SCREW PLUG IMMERSION HEATERS ELECTRIC PROCESS HEATER SOLUTIONS BEGIN HERE... Electric heaters are our only business. We are specialists in designing, engineering, and manufacturing both standard and custom

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Flanged Immersion Heaters

Flanged Immersion Heaters Flanged Immersion Heaters Are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating

More information

Tubular Heaters. Table Of Contents

Tubular Heaters. Table Of Contents Table Of Contents Pictorial Index....................... A-24 Tubular Heater Introduction and Specifications..................... 10-2 Tubular Heater Terminations........... 10-4 Tubular Heater Mounting

More information

Flanged Immersion Heaters

Flanged Immersion Heaters Flanged Immersion Heaters Are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating

More information

Cartridge Heaters. Table Of Contents

Cartridge Heaters. Table Of Contents Pictorial Index....................... A-10 Hi-Density Cartridge Heaters (US sizes)........................... 2-2 Terminator Program................. 2-10 Type F Terminated Stock Heaters........ 2-21

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Helically wound resistance wire coil made

Helically wound resistance wire coil made Ceramic Insulated CHANNEL STRIP HEATERS A Reliable Heat Source with Seamless Stainless Steel Sheath For Flat Surface Mounting Installations, Used in Hundreds Of Industrial and Commercial Heating Applications...

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the is immediately

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Coil & Cable Heaters. Table Of Contents

Coil & Cable Heaters. Table Of Contents Table Of Contents Pictorial Index....................... A-5 MightyBand Heaters.................. 5-2 MightyBand Heaters (Square & Rectangular Cable).......... 5-0 Tempco OEM Replacement Heaters For Hot

More information

Tubular Heaters Rev 4 ( ) Finned Tubular Heaters. Finned Tubular Heaters. View Product

Tubular Heaters Rev 4 ( ) Finned Tubular Heaters. Finned Tubular Heaters. View Product Shown with optional bulkhead fittings Shown with optional mounting flange at end of sheath Design Features Copper brazed steel fins on steel sheath standard. Aluminum based protective coating available.

More information

Band Heaters W A T L O W. Special Mica Barrel and Nozzle

Band Heaters W A T L O W. Special Mica Barrel and Nozzle W A T L O W For over 80 years, Watlow has been solving complex and unique application problems with standard mica barrel and nozzle heaters. Watlow is continuously improving design and application knowledge

More information

W A T L O W. Straight Resistance Wire. Welded End Cap

W A T L O W. Straight Resistance Wire. Welded End Cap W A T L O W The versatile Watlow cable heater can be formed to a variety of shapes as dictated by its many applications. Cable heaters are small diameter, high performance units, fully annealed and readily

More information

W A T L O W. Straight Resistance Wire. Welded End Cap

W A T L O W. Straight Resistance Wire. Welded End Cap W A T L O W The versatile Watlow cable heater can be formed to a variety of shapes as dictated by its many applications. Cable heaters are small diameter, high performance units, fully annealed and readily

More information

HEATERS & SENSORS INC. - CATALOG

HEATERS & SENSORS INC. - CATALOG HEATERS & SENSORS INC. - CATALOG Mica Band Heaters Efficient, Reliable and Economical Solution Maximum 900 ⁰F Operating Temperatures Build according to custom specifications Holes and cut-outs are available

More information

Tubular Industrial Process

Tubular Industrial Process consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Standard Screw Plug

More information

Strip/Clamp-On Heaters

Strip/Clamp-On Heaters Max. Operating Typical Max. Temperatures Watt Densities Strip/Clamp-On Heaters Sheath Materials F C W/in 2 W/cm 2 Page Mineral Insulated (MI) 304 stainless steel 1400 760 140 21.7 477 375 High-Temperature

More information

Heaters for. Hot Runner Systems. COIL Heaters l MICRO TUBULAR COIL Heaters l. The first choice, to last...

Heaters for. Hot Runner Systems. COIL Heaters l MICRO TUBULAR COIL Heaters l. The first choice, to last... Heaters for Hot Runner Systems COIL Heaters l MICRO TUBULAR COIL Heaters l HIGH PERFORMANCE HEATERS FOR MACHINE NOZZLES l TUBULAR Heaters The first choice, to last... 1 Coil Heaters Coil heaters are an

More information

Machining: Moderate to Extensive. Pattern Shop

Machining: Moderate to Extensive. Pattern Shop Casting Process: Low Pressure Used for large volume quantities. Specifically suited for intricate and challenging geometric shapes, producing quality castings with consistent dimensional accuracy and superior

More information

Hotwatt, established in 1952, began with the manufacturing of one product, the open coil heating element. Since then Hotwatt has expanded our product

Hotwatt, established in 1952, began with the manufacturing of one product, the open coil heating element. Since then Hotwatt has expanded our product Hotwatt, established in 1952, began with the manufacturing of one product, the open coil heating element. Since then Hotwatt has expanded our product line to include cartridge, air process, immersion,

More information

Phoenix Thermal Supply

Phoenix Thermal Supply MI BAND LEAD EXIT TYPES: Type 'T' - Post Terminals : Type 'T' is made in different configurations: 1) with a single stud termination exiting from each side of the gap, 2) both on one side fo the gap, both

More information

Thermo-Platens. Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment

Thermo-Platens. Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment Cast-In Platen Heaters are widely accepted as the industry standard for heating critical, temperaturesensitive plastics

More information

Coil Heaters. Design Features: Typical Applications: Coil Heaters

Coil Heaters. Design Features: Typical Applications: Coil Heaters Coil Heaters INTRODUCTION Durex coil heaters feature continuous operating temperatures up to 1200 F (649 C). Rapid heating and cooling occur, due to the low mass construction. All heating elements are

More information

Differences Among Screw Plug Immersion Heaters

Differences Among Screw Plug Immersion Heaters PDS QUALITY Differences Among Screw Plug Immersion Heaters On first impression, various manufacturers of screw plug immersion heaters appear to be all alike; but when you take a closer look at screw plug

More information

Machining: Moderate to Extensive. Pattern Shop

Machining: Moderate to Extensive. Pattern Shop Casting Process: Low Pressure Used for large volume quantities. Specifically suited for intricate and challenging geometric shapes, producing quality castings with consistent dimensional accuracy and superior

More information

Coil Heaters, Mini Coil Heaters, Formable/Flexible Tubular Heaters

Coil Heaters, Mini Coil Heaters, Formable/Flexible Tubular Heaters Coil Heaters, Mini Coil Heaters, Formable/Flexible Tubular Heaters Coil Heaters Square, Mini Coil Heaters, Formable/Flexible Tubular Heaters National Plastic Heater, Sensor and Control Inc., is a leading

More information

Pipe Thread Heaters. Construction Features. 1" 2-1/2" Pipe Thread Heaters

Pipe Thread Heaters. Construction Features. 1 2-1/2 Pipe Thread Heaters Construction Features 1" 2-1/2" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging of hex, thread and riser assures reliability. Element

More information

Strip/Clamp-On Heaters

Strip/Clamp-On Heaters Strip/Clamp-On Heaters Mineral Insulated Strip Heaters...553 Mica Strip Heaters...557 375 High-Temperature Strip Heaters...567 FIREBAR Clamp-On Heaters...575 Thick Film Conduction Heaters...577 551 552

More information

Product Catalog. Elements & Specialty Heaters. Section A

Product Catalog. Elements & Specialty Heaters. Section A Product Catalog Elements & Specialty Heaters Section A Content Tubular Heaters - HX & IX 4 Finned Tubular Heaters - KX 13 Cartridge Heaters - C 17 Strip & Finned Strip Heaters - SS, SD & FS 23 Strip Heater

More information

How 1 is your resistance. wire sized? What grade of magnesium oxide is being used? How 3 is your cold pin attached to your resistance wire?

How 1 is your resistance. wire sized? What grade of magnesium oxide is being used? How 3 is your cold pin attached to your resistance wire? PDS QUALITY On first impression, various manufacturers of screw plug immersion heaters appear to be all alike; but when you take a closer look at screw plug immersion heaters, it becomes evident that considerable

More information

BAND HEATERS component parts

BAND HEATERS component parts BAND HEATERS w w w.wat tco.com OVERVIEW WATTCO band heaters are the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. The various

More information

electric immersion heaters

electric immersion heaters C70- electric immersion heaters electric heating and controls Introduction INDEECO designs and manufactures commercial and industrial electric heating and control systems that set the industry standard

More information

MEGABAND * MICA INSULATED BAND HEATERS. Construction overview Clamping mechanisms Termination styles Construction styles Watt density information

MEGABAND * MICA INSULATED BAND HEATERS. Construction overview Clamping mechanisms Termination styles Construction styles Watt density information MEGABAND * MICA INSULATED BAND HEATERS MEGABAND mica insulated band heaters are efficient and economical solutions to the heating requirements of many applications. Although their maximum sheath temperature

More information

Mineral Insulated Band Heater

Mineral Insulated Band Heater The MI band heater is a high-performance heater. Its performance and name are derived from exclusive mineral insulation a material with much higher thermal conductivity than mica and hard ceramic insulators

More information

Immersion Heaters. Screw Plug Immersion Heater

Immersion Heaters. Screw Plug Immersion Heater Screw plug immersion heaters are ideal for direct immersion heating of liquids, including all types of oils and heat transfer solutions. Available in a variety of sizes, screw plug immersion heaters feature

More information

Machining: Moderate to Extensive. Pattern Shop

Machining: Moderate to Extensive. Pattern Shop Casting Process: Low Pressure Used for large volume quantities. Specifically suited for intricate and challenging geometric shapes, producing quality castings with consistent dimensional accuracy and superior

More information

Machining: Moderate to Extensive. Pattern Shop

Machining: Moderate to Extensive. Pattern Shop Casting Process: Low Pressure Used for large volume quantities. Specifically suited for intricate and challenging geometric shapes, producing quality castings with consistent dimensional accuracy and superior

More information

PRODUCT LISTING Tubular Heater Finned Heater

PRODUCT LISTING Tubular Heater Finned Heater PRODUCT LISTING Tubular Heater Tubular heaters are a versatile heating source for wide variety of industrial and commercial applications. It can be applied in straight or bent into complex shape by having

More information

Ceramic Fiber Heaters

Ceramic Fiber Heaters Introduction High Temperature Ceramic Fiber Heaters Design Features Standard Heaters to 1100 C (2012 F) High Temperature Version to 1200 C (2192 F) Low Thermally Conductive Built-In Insulation Standard

More information

Typical Applications. Braking Resistor Core Drying Dehumidification Forced Air Comfort Heating

Typical Applications. Braking Resistor Core Drying Dehumidification Forced Air Comfort Heating Process air duct heaters are used for tempering forced air in many industrial processes. Heater wattage is dependent on air outlet temperature (up to 1200 F [650 C]) and air velocity. Smaller duct heaters

More information

High Performance Heater with More Efficient Heat

High Performance Heater with More Efficient Heat Mineral Insulated Band Heaters High Performance Heater with More Efficient Heat The Mineral Insulated (MI) band heater from Watlow & Tempco is a high-performance heater. Its performance and name are derived

More information

electric immersion heaters

electric immersion heaters C70-7 electric immersion heaters electric heating and controls Table Contents Selection Guide... - Quick Ship Pipe Thread Heaters... - Construction Features... Pipe Thread Heaters... -/ Pipe Thread Heaters...

More information

Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4

Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4 N1 Aftermarket Hot Runner Parts & Services: Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4 Aftermarket Hot Runner Replacement Parts: Axial Clamp Heaters...N9

More information

Screw Plug Immersion Heaters

Screw Plug Immersion Heaters Overview consist of hairpin bent tubular elements brazed or welded into a screw plug and provided with terminal enclosures for electrical connections. are screwed directly through a threaded opening in

More information

Tubular Industrial Process

Tubular Industrial Process Application Tempco Over-the-Side Immersion Heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round

More information

Mineral Insulated Band Heaters

Mineral Insulated Band Heaters Mineral Insulated Band Heaters High Performance Heater More Efficient Heat Transfer The mineral insulated (MI) band heater from Watlow is a high-performance heater that incorporates Watlow s exclusive

More information

Cartridge Heaters: Low to Medium Watt Density. Construction:

Cartridge Heaters: Low to Medium Watt Density. Construction: Cartridge Heaters: Low to Medium Watt Density Applications: Compressor Crankcase Heating, Copiers, Dies, Food Processing, Glue Pots, Heat Sealing, Hot Melt Adhesive, Labeling, Medical Equipment, Packaging,

More information

BAND HEATERS TYPICAL APPLICATIONS: SPECIAL OPTIONAL FEATURES: Plastic Injection Molding. Two piece construction. Plastic, Food, or Candy Extruders

BAND HEATERS TYPICAL APPLICATIONS: SPECIAL OPTIONAL FEATURES: Plastic Injection Molding. Two piece construction. Plastic, Food, or Candy Extruders Durex provides a complete line of mica and ceramic band heaters used extensively for injection molding and extrusion applications. Operating at temperatures up to 1200 F, these heaters are an economical

More information

Capabilities Catalog 12298_Tutco_Catalog.indd _Tutco_Catalog.indd 1 11/18/10 8:21:11 AM 11/18/10 8:21:11 AM

Capabilities Catalog 12298_Tutco_Catalog.indd _Tutco_Catalog.indd 1 11/18/10 8:21:11 AM 11/18/10 8:21:11 AM Capabilities Catalog 12298_Tutco_Catalog.indd 1 11/18/10 8:21:11 AM Tutco Heating Solutions Group :: Global Leaders Tutco is the world s largest supplier of open coil heating elements. We produce 35,000

More information

Frequently Asked Band Heater Questions Plus

Frequently Asked Band Heater Questions Plus Frequently Asked Band Heater Questions Plus Welcome to National Plastic Heater, Sensor and Control Inc s frequently asked heater questions page. These, address Mica, Ceramic Band and Cartridge Heaters.

More information

Energy Saving Band Heaters

Energy Saving Band Heaters Energy Saving Band Heaters MICA BAND HEATERS l MICA NOZZLE HEATERS l CERAMIC BAND HEATERS 1 The first choice, to last... Energy Saving Ceramic Band Heaters PHP Ceramic Band heaters are available with or

More information

Frequently Asked Heater Questions Plus

Frequently Asked Heater Questions Plus Electric Heating, Sensing and Control Technology Frequently Asked Heater Questions Plus Mica Band Heaters-Construction Components Ceramic Band/Knuckle Heater-Construction Components Welcome to National

More information

Thermal Devices, Inc. Mount Airy, Maryland USA C D E F. Typical Maxiband Clamping

Thermal Devices, Inc. Mount Airy, Maryland USA   C D E F. Typical Maxiband Clamping Maxiband Heaters The Most Sought After Band Heater A B Maxiband General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the box has two 1/2" trade

More information

Nozzle Band Heaters. Construction Characteristics. Single Port Igloo TM Covers

Nozzle Band Heaters. Construction Characteristics. Single Port Igloo TM Covers Construction Characteristics The ideal solution for applications that require high watt densities (Watt/in 2 ) and/or high operating temperatures. Band heaters are capable of temperatures up to 760 C (1400

More information

Finned Tubular Heaters

Finned Tubular Heaters Finned Tubular Heaters Finned Tubular Heating Elements Finned Tubular Heaters Finned Tubular Heating Elements are the most versatile, dependable and rugged of any heat generating device. These qualities

More information

Cartridge Heater Solutions

Cartridge Heater Solutions Cartridge Heater Solutions www.nexthermal.com Made in the U.S.A. Who is Nexthermal? Nexthermal is a new name for a company that has focused passion and energy toward the creation of electric heating elements,

More information

Flexible Heaters. of Silicone Rubber & Kapton

Flexible Heaters. of Silicone Rubber & Kapton Flexible Heaters INTRODUCTION Durex Industries flexible heating elements are providing customers their optimal thermal solution in over twenty different OEM markets. Durex s unique approach to flexible

More information

Pictorial Index... A-4 Mi-Plus (Mineral Insulated Band) Duraband (Mica Band) Injection Molding Replacement Band Heaters...

Pictorial Index... A-4 Mi-Plus (Mineral Insulated Band) Duraband (Mica Band) Injection Molding Replacement Band Heaters... Table Of Contents Pictorial Index............................... A-4 Mi-Plus (Mineral Insulated Band).............. 1-2 Duraband (Mica Band)...................... 1-24 Injection Molding Replacement Band

More information

PRODUCT CATALOGUE for the METAL FINISHING INDUSTRY

PRODUCT CATALOGUE for the METAL FINISHING INDUSTRY PRODUCT CATALOGUE for the METAL FINISHING INDUSTRY CONTENTS Page Over-the-side (OTS) heating elements 1 Typical sheath material for OTS heaters 2 Temperature and level probes 3 Temperature and level control

More information

( )

( ) (1-800-492-8826) FANGE HEATERS OVERVIEW WATTCO flange heaters are made using hairpin or bugle type tubular elements using incoloy sheathed elements that are welded or silver-brazed into a pipe or steel

More information

Circulation Heaters Selection Guidelines

Circulation Heaters Selection Guidelines Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation

More information

Heating Cables and Tapes. Technology. Constant wattage tapes

Heating Cables and Tapes. Technology. Constant wattage tapes Heating Cables and Tapes Technology Heating cables and tapes are one of the most versatile product lines in the Isopad range. Available in a vast array of technologies, the Isopad range is surpassed by

More information

Applications Dies, Heat Sealing, Hot Melt Adhesive, Plastic Molding, Platens, Shoe Machinery.

Applications Dies, Heat Sealing, Hot Melt Adhesive, Plastic Molding, Platens, Shoe Machinery. Cartridge Heaters: Superwatt High Watt Density Applications Dies, Heat Sealing, Hot Melt Adhesive, Plastic Molding, Platens, Shoe Machinery. Features Elements are designed for maximum: Watt density, temperature,

More information

Circulation Heaters Selection Guidelines

Circulation Heaters Selection Guidelines Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation

More information

MEGABAND MICA INSULATED BAND HEATERS

MEGABAND MICA INSULATED BAND HEATERS Injection molding machines Plastic extruders The food industry Blow-molding machines Container, pipe or tank heating The pharmaceutical industry Construction and features Economical Dependable and efficient

More information

( )

( ) (1-800-492-8826) OVERVIEW WATTCO over-the-side are made of sidemounted tubular elements. Perfectly designed for freeze protection, for heating viscous solutions, water, oils, solvents, salts, and acids.

More information

ASME Packaged Electric Water Heater

ASME Packaged Electric Water Heater MODEL SH & H ASME Packaged Electric Water Heater 15-1600 KW - All Voltages & Phases, 80-5000 Gallon Capacity Features Reliable Packaged System Only high grade materials used in construction to ensure long

More information

FIREROD CARTRIDGE HEATERS PROVIDE QUALITY EXPERTISE FOR YOUR MOST DEMANDING APPLICATIONS AND ENGINEERING

FIREROD CARTRIDGE HEATERS PROVIDE QUALITY EXPERTISE FOR YOUR MOST DEMANDING APPLICATIONS AND ENGINEERING W A T L O W FIREROD CARTRIDGE HEATERS PROVIDE QUALITY AND ENGINEERING EXPERTISE FOR YOUR MOST DEMANDING APPLICATIONS .......................... FOUR QUESTIONS TO ASK WHEN SELECTING YOUR CARTRIDGE HEATER

More information

BRINGING WARMTH TO YOUR WORLD

BRINGING WARMTH TO YOUR WORLD BRINGING WARMTH TO YOUR WORLD In our Elements brochure you will find reference to many of the different types of electric heating elements we produce both in our Manchester factory and in our group companies

More information

Screw plug immersion heaters

Screw plug immersion heaters Screw plug HEATING GASES HEATING LIQUIDS MAINTAINING A CONTINUOUS TEMPERATURE The screw plug by CETAL are designed and manufactured as a standard range or according to customer specifications. Reliability

More information

temperature Controllers

temperature Controllers temperature Controllers Bulb and Capillary Thermostats Thermostat Styles and Selection Construction Characteristics This type of control operates by expansion and contraction of a liquid in response to

More information

RESEARCH AND TECHNOLOGY BUILDING RENOVATION 05/18/09 SECTION REFRIGERANT PIPING AND SPECIALITIES

RESEARCH AND TECHNOLOGY BUILDING RENOVATION 05/18/09 SECTION REFRIGERANT PIPING AND SPECIALITIES SECTION 23 23 00 REFRIGERANT PIPING AND SPECIALITIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Refrigerant piping. 2. Unions, flanges, and couplings. 3. Pipe hangers and supports. 4. Refrigerant

More information

Nozzle/Slip-On Heaters

Nozzle/Slip-On Heaters Nozzle/Slip-On Heaters Mineral Insulated Nozzle Heaters...591 THINBAND Mica Nozzle Heaters...599 Syringe Heaters...605 Thick Film Cylindrical Heaters...607 Pre-Coiled Cable Nozzle Heaters...609 Metric

More information

Thermal Devices Inc. Mount Airy, Maryland USA Process Air and Radiant. ADH Typical Installation.

Thermal Devices Inc. Mount Airy, Maryland USA Process Air and Radiant. ADH Typical Installation. DH & DHT Series ir Duct Heaters 5-300 kw 240 and 480 Volt, Three Phase (Up to 600V vailable) DH Typical Installation DHT Typical Installation INCOLOY Sheath Elements 800 F Max. Outlet ir Temp. (DH) 1200

More information

HOTCO BAND HEATERS FLEXIBLE BAND HEATERS - MICA INSULATED CONSTRUCTION AND LIMITATIONS ELECTRICAL TERMINATION WELDED BAND HEATERS - MICA INSULATED

HOTCO BAND HEATERS FLEXIBLE BAND HEATERS - MICA INSULATED CONSTRUCTION AND LIMITATIONS ELECTRICAL TERMINATION WELDED BAND HEATERS - MICA INSULATED HOTCO FLEXIBLE - MICA INSULATED Hotco flexible band heaters are designed to enable both installation and removal of the heater, without disturbing or having to remove previously installed heaters or fittings.

More information