User Manual Steamer KS KT

Transcription

1 EN User Manual Steamer KS KT

2 2 CONTENTS 1. SAFETY INFORMATION SAFETY INSTRUCTIONS PRODUCT DESCRIPTION CONTROL PANEL BEFORE FIRST USE DAILY USE CLOCK FUNCTIONS AUTOMATIC PROGRAMMES USING THE ACCESSORIES ADDITIONAL FUNCTIONS HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING...22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website for: Get usage advice, brochures, trouble shooter, service information: Register your product for better service: Buy Accessories, Consumables and Original spare parts for your appliance: CUSTOMER CARE AND SERVICE Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.

3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Do not let children play with the appliance. Keep all packaging away from children. Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot. If the appliance has a child safety device, we recommend you activate it. Cleaning and user maintenance shall not be made by children without supervision. Children of less than 3 years should be kept away unless continuously supervised. 1.2 General Safety ENGLISH 3 Only a qualified person must install this appliance and replace the cable. Internally the appliance becomes hot when in operation. Do not touch the heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware. Before maintenance cut the power supply.

4 4 Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence. 2. SAFETY INSTRUCTIONS 2.1 Installation Only a qualified person must install this appliance. Remove all the packaging. Do not install or use a damaged appliance. Obey the installation instruction supplied with the appliance. Always be careful when you move the appliance because it is heavy. Always wear safety gloves. Do not pull the appliance by the handle. Keep the minimum distance from the other appliances and units. Make sure that the appliance is installed below and adjacent safe structures. The sides of the appliance must stay adjacent to appliances or to units with the same height. 2.2 Electrical connection Risk of fire and electrical shock. All electrical connections should be made by a qualified electrician. The appliance must be earthed. Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. Do not let mains cables touch or come near the appliance door, especially when the door is hot. The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug.

5 ENGLISH 5 Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. This appliance complies with the E.E.C. Directives. 2.3 Use Risk of injury, burns and electrical shock or explosion. Use this appliance in a household only. Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Deactivate the appliance after each use. Be careful when you open the appliance door while the appliance is in operation. Hot air can release. Do not operate the appliance with wet hands or when it has contact with water. Do not apply pressure on the open door. Do not use the appliance as a work surface or as a storage surface. Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. Do not let sparks or open flames to come in contact with the appliance when you open the door. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Risk of damage to the appliance. To prevent damage or discoloration to the enamel: do not put ovenware or other objects in the appliance directly on the bottom. do not put aluminium foil directly on the bottom of the appliance. do not put water directly into the hot appliance. do not keep moist dishes and food in the appliance after you finish the cooking. be careful when you remove or install the accessories. Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of the warranty law. Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent. This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. Always cook with the oven door closed. 2.4 Steam Cooking Risk of burns and damage to the appliance. Released Steam can cause burns: Do not open the appliance door during the steam cooking operation. Open the appliance door with care after the steam cooking operation. 2.5 Care and cleaning Risk of injury, fire, or damage to the appliance. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Make sure the appliance is cold. There is the risk that the glass panels can break.

6 6 Replace immediately the door glass panels when they are damaged. Contact the Service. Be careful when you remove the door from the appliance. The door is heavy! Clean regularly the appliance to prevent the deterioration of the surface material. Remaining fat or food in the appliance can cause fire. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. If you use an oven spray, obey the safety instructions on the packaging. Do not clean the catalytic enamel (if applicable) with any kind of detergent. for household appliances. Do not use it for house lighting. Risk of electrical shock. Before replacing the lamp, disconnect the appliance from the power supply. Only use lamps with the same specifications. 2.7 Disposal Risk of injury or suffocation. Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. Remove the door catch to prevent children and pets to get closed in the appliance. 2.6 Internal light The type of light bulb or halogen lamp used for this appliance is only 3. PRODUCT DESCRIPTION 3.1 General overview Control panel 2 Electronic programmer 3 Water drawer 4 Lamp 5 Steam generator with cover 6 Shelf support, removable 7 Shelf positions Accessories For cookware, cake tins, roasts. Wire shelf

7 ENGLISH 7 Steam set cooking (e.g. vegetables, pieces of fish, chicken breast). The set is not suitable for food that needs to soak in the water (e.g. rice, polenta, pasta). Sponge One unperforated and one perforated food container. The steam set drains the condensing water away from the food during steam cooking. Use it to prepare food that should not be in the water during the 4. CONTROL PANEL 4.1 Electronic programmer For absorbing the remaining water from the steam generator Use the sensor fields to operate the appliance. Sensor field Function Comment 1 - Display Shows the current settings of the appliance. 2 ON / OFF To activate and deactivate the appliance. 3 4 Full Steam or Assisted Cooking Favourite Programme Touch the sensor field once to choose a heating function or the menu: Assisted Cooking. Touch the sensor field again to switch between the functions: Full Steam, Assisted Cooking. To activate or deactivate the light, touch the field for 3 seconds. You can activate the light also when the appliance is deactivated. To save and access your favourite programmes.

8 8 Sensor field Function Comment 5 6 Temperature selection Down key To set the temperature or show the current temperature in the appliance. To move down in the menu. 7 Up key To move up in the menu. 8 OK To confirm the selection or setting Home key Time and additional functions Minute Minder To go back one level in the menu. To show the main menu, touch the field for 3 seconds. To set different functions. When a heating function operates, touch the sensor field to set the timer or the functions: Function Lock, Favourite Programme, Set + Go. To set the function: Minute Minder. 4.2 Display A B C A) Heating function B) Time of day C) Heat-up indicator D) Temperature E) Duration time or end time of a function E D Other indicators of the display: Symbol Function Minute Minder Time of day Duration End Time Temperature The function operates. The display shows the current time. The display shows the necessary time for cooking. The display shows when the cooking time is complete. The display shows the temperature.

9 ENGLISH 9 Symbol Function Time Indication Heat-up Indicator The display shows how long the heating function operates. Press and at the same time to reset the time. The display shows the temperature in the appliance. 5. BEFORE FIRST USE Refer to Safety chapters. 5.1 Initial Cleaning Remove all accessories and removable shelf supports from the appliance. Refer to "Care and cleaning" chapter. 5.2 First Connection When you connect the appliance to the mains or after the power cut, you have to set the language, the display contrast, the display brightness and the time of the day. 1. Press or to set the value. 2. Press to confirm. 6. DAILY USE Clean the appliance before first use. Put the accessories and the removable shelf supports back to their initial position. Refer to Safety chapters. 6.1 Navigating the menus 1. Activate the appliance. 2. Press or to select the menu option. 3. Press to move to the submenu or accept the setting. At each point you can go back to the main menu with. 6.2 The menus in overview Main menu Symbol Menu item Assisted Cooking Full Steam Application Contains a list of automatic programmes. A heating function for vegetables, fish, potatoes, rice, pasta or special side dishes.

10 10 Menu item Steam Cleaning Basic Settings Favourite Programme Application Cleaning the appliance with steam. You can use it to set other settings. Contains a list of favourite cooking programmes created by the user. Submenu for: Basic Settings Symbol Symbol Submenu Set Time of Day Time Indication Set + Go Display Contrast Display Brightness Set Language Buzzer Volume Key Tones Alarm/Error Tones Service Factory Settings Description Sets the current time on the clock. When ON, the display shows the current time when you deactivate the appliance. When ON, in the Select Options window you can choose the function: Set + Go. Adjusts the display contrast by degrees. Adjusts the display brightness by degrees. Sets the language for the display. Adjusts the volume of press-tones and signals by degrees. Activates and deactivates the tone of the touch fields. It is not possible to deactivate the tone of the ON / OFF touch field. Activates and deactivates the alarm tones. Shows the software version and configuration. Resets all settings to factory settings. 6.3 Activating a heating function 1. Activate the appliance. 2. Select the function: Full Steam. 3. Press to confirm. 4. Set the temperature. 5. Press to confirm. 6.4 Steam cooking The water drawer cover is in the control panel.

11 ENGLISH 11 Do not put water directly into the steam generator. Use only water. Do not use filtered (demineralised) or distilled water. Do not use other liquids. Do not put flammable or alcoholic liquids into the water drawer. 1. Prepare the food in the correct cookware. 2. Press the cover of the water drawer to open it. 3. Fill the water drawer with 800 ml of water. The water supply is sufficient for approximately 50 minutes. 4. Push the water drawer to its initial position. 5. Activate the appliance. 6. Select a steam heating function and the temperature. 7. If necessary, set the function Duration or End Time. The first steam shows after approximately 2 minutes. An acoustic signal sounds when the appliance is at approximately the set temperature. When the steam generator is empty, an acoustic signal sounds. The signal sounds at the end of the cooking time. 8. Deactivate the appliance. 9. Empty the water drawer after the steam cooking is completed. CAUTION! The appliance is hot. There is a risk of burns. Be careful when you empty the water drawer. When the appliance cools down, soak up all remaining water from the steam generator with the sponge. If necessary, clean the steam generator with some vinegar. Let the appliance dry fully with the door open. 6.5 Heat-up indicator When you activate a heating function, the bar on the display comes on. The bar shows that the temperature increases. 6.6 Residual heat When you deactivate the appliance, the display shows the residual heat. You can use the heat to keep the food warm. 6.7 Energy saving The appliance contains features which help you save energy during everyday cooking. General hints Make sure that the oven door is closed properly when the appliance operates and keep it closed as much as possible during the cooking. Use metal dishes to improve the energy saving. When possible, put the food inside the oven without heating it up. When the cooking duration is longer than 30 minutes, reduce the oven temperature to minimum, 3-10 minutes before the end of the cooking time, depending on the duration of the cooking. The residual heat inside the oven will continue to cook. Use the residual heat to warm up other foods. Residual heat In some heating functions if a programme with time selection (Duration, End Time) is activated and the cooking time is longer than 30 minutes, the heating elements deactivate automatically 10% earlier. Cooking with the lamp off - deactivate the lamp during the cooking and activate only when you need it. Keep food warm - if you want to use the residual heat to keep the meal warm, choose the lowest possible temperature setting. The display shows the residual heat temperature.

12 CLOCK FUNCTIONS 7.1 Clock functions table Clock function Application Minute Minder Duration End Time If you set the time for a clock function, the time starts to count down after 5 seconds. If you use the clock functions: Duration, End Time, the appliance deactivates the heating elements after 90 % of the set time. The appliance uses the residual heat to continue the cooking process until the time ends (3-20 minutes). To set a countdown (max. 2 h 30 min). This function has no effect on the operation of the appliance. You can also activate it when the appliance is deactivated. Use to activate the function. Press or to set the minutes and to start. To set the length of an operation (max. 23 h 59 min). To set the switch-off time for a heating function (max. 23 h 59 min). 7.2 Setting the clock functions Before you use the functions: Duration, End Time, you must set a heating function and temperature first. The appliance deactivates automatically. You can use the functions: Duration and End Time at the same time if you want to automatically activate and deactivate the appliance on a given time later. 1. Set a heating function. 2. Press again and again until the display shows the necessary clock function and the related symbol. 3. Press or to set the necessary time. 4. Press to confirm. When the time ends, an acoustic signal sounds. The appliance deactivates. The display shows a message. 5. Press a sensor field to stop the signal.

13 ENGLISH AUTOMATIC PROGRAMMES Refer to Safety chapters. 8.1 Recipes online You can find the recipes for the automatic programmes specified for this appliance on our website. To find the proper Recipe Book check the PNC number on the rating plate on the front frame of the appliance cavity. 9. USING THE ACCESSORIES Refer to Safety chapters. 9.1 Inserting the accessories Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the feet point down. 8.2 Assisted Cooking with Recipe Automatic This appliance has a set of recipes you can use. The recipes are fixed and you cannot change them. 1. Activate the appliance. 2. Select the menu: Assisted Cooking. Press to confirm. 3. Select the category and dish. Press to confirm. 4. Select a recipe. Press to confirm. When you use the function: Manual, the appliance uses the automatic settings. You can change them as with other functions. All accessories have small indentations at the top of the right and left side to increase safety. The indentations are also antitip devices. The high rim around the shelf is a device which prevents cookware from slipping.

14 ADDITIONAL FUNCTIONS 10.1 Favourite Programme You can save your favourite settings, such as duration, temperature or heating function. They are available in the menu: Favourite Programme. You can save 20 programmes. Saving a programme 1. Activate the appliance. 2. Set a heating function or an automatic programme. 3. Touch again and again until the display shows: SAVE. 4. Press to confirm. The display shows the first free memory position. 5. Press to confirm. 6. Enter the name of the programme. The first letter flashes. 7. Touch or to change the letter. 8. Press. The next letter flashes. 9. Do step 7 again as necessary. 10. Press and hold to save. You can overwrite a memory position. When the display shows the first free memory position, touch or and press to overwrite an existing programme. You can change the name of a programme in the menu: Edit Programme Name. Activating the programme 1. Activate the appliance. 2. Select the menu: Favourite Programme. 3. Press to confirm. 4. Select your favourite programme name. 5. Press to confirm. Press to go directly to menu: Favourite Programme. You can also use it when the appliance is deactivated Using the Child Lock The Child Lock prevents an accidental operation of the appliance. 1. Activate the appliance. 2. Touch and at the same time until the display shows a message. To deactivate the Child Lock function repeat step Function Lock This function prevents an accidental change of the heating function. You can activate it only when the appliance operates. 1. Activate the appliance. 2. Set a heating function or setting. 3. Press again and again until the display shows: Function Lock. 4. Press to confirm. To deactivate the function, press display shows a message. Press and then to confirm. When you deactivate the appliance, the function also deactivates Set + Go The function lets you set a heating function (or a programme) and use it later with one press of a sensor field. 1. Activate the appliance. 2. Set a heating function. 3. Press again and again until the display shows: Duration. 4. Set the time. 5. Press again and again until the display shows: Set + Go. 6. Press to confirm. Press a sensor field (except for ) to start the function: Set + Go. The set heating function starts. When the heating function ends, an acoustic signal sounds.. The again

15 ENGLISH 15 Function Lock is on when the heating function operates. The menu: Basic Settings lets you activate and deactivate the function: Set + Go Automatic Switch-off For safety reasons the appliance deactivates automatically after some time if a heating function operates and you do not change any settings. Temperature ( C) Switch-off time (h) The Automatic switch-off does not work with the functions: Light, End Time, Duration Brightness of the display There are two modes of display brightness: 11. HINTS AND TIPS Refer to Safety chapters. The temperature and baking times in the tables are guidelines only. They depend on the recipes and the quality and quantity of the ingredients used Inner side of the door In some models, on the inner side of the door you can find: the numbers of the shelf positions. information about the heating functions, recommended shelf positions and temperatures for typical dishes. Night brightness - when the appliance is deactivated, the brightness of the display is lower between 10 PM and 6 AM. Day brightness: when the appliance is activated. if you touch a sensor field during the night brightness (apart from ON / OFF), the display goes back to the day brightness mode for the next 10 seconds. if the appliance is deactivated and you set the function: Minute Minder. When the function ends, the display goes back to the night brightness Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down Cooking with steam Use only heat and corrosion resistant cookware or chrome steel food containers (for some models only). The correct shelf positions are in the table below. Count the shelf positions from the bottom to the top. When you cook longer than 30 minutes or when you cook large quantities of food, add water if it is necessary. Put the food into the correct cooking containers and put the containers on the shelves. Make sure that there is some distance between the shelves to let the steam circulate around each container. After each use, remove the water from the water drawer, connecting hoses and steam generator. Refer to the chapter "Care and cleaning". The tables give data for typical dishes.

16 16 Start the procedure with a cold appliance unless the data in the tables is different. Use a recipe that is almost the same if you cannot find the settings for your recipe. When you cook rice, use a ratio of 1.5 : 1 2 : 1 water to rice because rice absorbs water Steam water table Time (min) Water in the water drawer (ml) Full Steam Do not open the appliance door when the function is activated. There is a risk of burns. The function is applicable for all types of food, fresh or frozen. You can use it to cook, warm, defrost, poach or blanch vegetables, meat, fish, pasta, rice, sweet corn, semolina and eggs. You can prepare a full meal in one operation. To correctly cook each dish, use those with cooking times which are almost the same. Add the largest quantity of water necessary for one of the dishes in the operation. Put the dishes into the correct cookware and then on the wire shelves. Adjust the distance between the cookware to let the steam circulate. Sterilisation with the function: Full Steam With this function you can sterilise containers (e.g. baby bottles). Put the clean containers in the middle of the shelf on the 1st shelf position. Make sure that the opening is down at a small angle. Fill the drawer with the maximum quantity of water and set the time to 40 min. Vegetables Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Artichokes Auberginen Cauliflower, whole Cauliflower, florets Broccoli, whole Broccoli, florets

17 ENGLISH 17 Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Mushroom slices Peas Fennel Carrots Kohlrabi, strips Peppers, strips Leeks, rings Green beans Lamb's lettuce, florets Brussels sprouts Beetroot Black salsify Celery, cubed Asparagus, green Asparagus, white Spinach, fresh Peeling tomatoes White haricot beans Savoy cabbage Courgette, slices Side dishes / accompaniments Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Yeast dumplings

18 18 Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Potato dumplings Unpeeled potatoes, medium Rice (water / rice ratio 1.5 : 1) Boiled potatoes, quartered Bread dumpling Tagliatelle, fresh Polenta (liquid / polenta ratio 3 : 1) Fish Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Trout, approx. 250 g Prawns, fresh Prawns, frozen Salmon filets Salmon trout, approx g Mussels Flat fish filet Meat Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Cooked ham 1000 g Chicken breast, poached

19 ENGLISH 19 Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Chicken, poached, g Veal / pork loin without leg, g Kasseler (smoked loin of pork), poached Tafelspitz (prime boiled beef) Chipolatas Eggs Food Temperature ( C) Time (min) Shelf position Water in the water drawer (ml) Eggs, softboiled Eggs, mediumboiled Eggs, hardboiled CARE AND CLEANING Refer to Safety chapters Notes on cleaning Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. To clean metal surfaces, use a usual cleaning agent. Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. Clean stubborn dirt with a special oven cleaner. Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent. If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can cause damage to the nonstick coating Removing the shelf supports Before maintenance, make sure that the appliance is cool. There is a risk of burns.

20 20 To clean the appliance, remove the shelf supports. 1. Pull carefully the supports up and out of the front catch Pull the front end of the shelf support away from the side wall. 3. Pull the supports out of the rear catch. Install the shelf supports in the opposite sequence Steam Cleaning Remove the worst dirt manually. 1. Put 250 ml of water with 3 tablespoons of vinegar directly into the steam generator. 2. Activate the function: Steam Cleaning. The display shows the duration of the function. An acoustic signal sounds when the programme is completed. 3. Touch a sensor field to deactivate the signal. 4. Wipe out the appliance with a soft cloth. Remove the water from the steam generator. Keep the appliance door open for approximately 1 hour. Wait until the appliance is dry. To speed up the drying you can heat up the appliance with hot air at temperature 150 C for approximately 15 minutes Steam generation system CAUTION! Dry the steam generator after each use. Remove the water with the sponge. Remove the limescale with water and vinegar. CAUTION! Chemical de-scaling agents can cause damage to the enamel. Follow the instructions of the manufacturer. 1. To clean the water drawer and the steam generator, put the water and vinegar mixture (approximately 250 ml) through the water drawer into the steam generator. Wait for approximately 10 minutes. 2. Remove the water and vinegar with the sponge. 3. Put clean water ( ml) into the water drawer to flush the steam generation system. 4. Remove the water from the steam generator with the sponge and rub it dry. 5. Keep the door open to let the appliance dry fully Removing and installing the door You can remove the door and the internal glass panels to clean it. The number of glass panels is different for different models. Be careful when you remove the door from the appliance. The door is heavy. 1. Open the door fully. 2. Fully lift up the clamping levers (A) on the two door hinges. A 3. Close the door until it is at an angle of approximately 45. A

21 ENGLISH 21 When the cleaning is completed, install the glass panels and the door. Do the above steps in the opposite sequence. Install the smaller panel first, then the larger Replacing the lamp Hold the door with one hand on each side and pull it away from the appliance at an upwards angle. 5. Put the door with the outer side down on a soft cloth on a stable surface. This is to prevent scratches. 6. Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. 2 Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot. 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker. The top lamp 1. Turn the lamp glass cover counterclockwise to remove it. B 1 CAUTION! Rough handling of the glass, especially around the edges of the front panel, can cause the glass to break. 7. Pull the door trim to the front to remove it. 8. Hold the door glass panels on their top edge one by one and pull them up out of the guide. 9. Clean the glass panel with water and soap. Dry the glass panel carefully. 2. Remove the metal ring and clean the glass cover. 3. Replace the lamp with a suitable 300 C heat-resistant lamp. 4. Attach the metal ring to the glass cover. 5. Install the glass cover. The side lamp 1. Remove the left shelf support to get access to the lamp. 2. Use a Torx 20 screwdriver to remove the cover. 3. Remove and clean the metal frame and the seal. 4. Replace the lamp with a suitable 300 C heat-resistant lamp. 5. Install the metal frame and the seal. Tighten the screws. 6. Install the left shelf support.

22 TROUBLESHOOTING Refer to Safety chapters What to do if... Problem Possible cause Remedy The appliance does not heat up. The appliance does not heat up. The appliance does not heat up. The appliance does not heat up. The appliance does not heat up. The appliance does not heat up. The appliance does not heat up. The appliance is deactivated. The clock is not set. The necessary settings are not set. The automatic switch-off is activated. The Child Lock is on. The door is not closed correctly. The fuse is released. Activate the appliance. Set the clock. Make sure that the settings are correct. Refer to "Automatic switchoff". Refer to "Using the Child Lock". Fully close the door. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. The lamp does not operate. The lamp is defective. Replace the lamp. The display shows an error code that is not in this table. There is an electrical fault. Deactivate the appliance with the house fuse or the safety switch in the fuse box and activate it again. If the display shows the error code again, contact the Customer Care Department. Steam and condensation settle on the food and in the cavity of the appliance. You left the dish in the appliance for too long. Do not leave the dishes in the appliance for longer than minutes after the cooking process ends Service data If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

23 * ENGLISH 23 We recommend that you write the data here: Model (MOD.)... Product number (PNC)... Serial number (S.N.) ENVIRONMENT CONCERNS Recycle the materials with the symbol. Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

24 A