Ventilation. Technical Data. Outdoor air processing unit, ventilation and air processing EEDEN FXMQ-MF

Transcription

1 Ventilation Technical Data Outdoor air processing unit, ventilation and air processing EEDEN FXMQ-MF

2

3 TABLE OF CONTENTS FXMQ-MF 1 Features Specifications Technical Specifications Electrical Specifications Safety device settings Options Coli ng/ Heati ng CapacityTables 7 DimensionalDr awings 10 DimensionalDr awingswi thaccessories 12 5 Capacity tables Dimensional drawings Centre of gravity Piping diagrams Wir ingdiagrams-singlephase 16 SoundPressur espectr um 17 9 Wiring diagrams Sound data Fan characteristics Operation range Ventilation FXMQ-MF 1

4 t t i ai an l r i F or t o - do n dt e nu IF 1 Features r U M Q M X VO 100% fresh air intake possible Ideal solution for shops, restaurants or offices requiring maximum floor space for furniture, decorations and fittings Operation range: -5 C to 43 C Up to 225Pa external static pressure allows extensive ductwork runs and flexible application: ideal for use in large areas Drain pump kit available as accessory 1 2 Ventilation FXMQ-MF

5 2 Specifications 2-1 Technical Specifications FXMQ125MF FXMQ200MF FXMQ250MF Cooling capacity Nom. kw 14.0 (1) 22.4 (1) 28.0 (1) Heating capacity Nom. kw 8.9 (2) 13.9 (2) 17.4 (2) Connection ratio Outdoor units with only ventilati on units connect ed Ventilation units when combin ed with VRV indoor units Standard Accessories : Clamps; Standard Accessories : Screws; Standard Accessories : Sealing pads; Standard Accessories : Installation and operation manual; Standard Accessories : Connection pipes; Minimu m Maximu m Maximu m % 50 % 100 % 30 Casing Material Galvanised steel Dimensions Unit Height mm 470 Width mm 744 1,380 Depth mm 1,100 Weight Unit kg Heat exchanger Rows Quantity 3 Stages Quantity 26 Fin pitch mm 2.0 Face area m² Fan Type Sirocco fan External static pressure - 50Hz High Pa Fan motor Model D13/4G2DA1 Output 50 Hz W 380 Drive Direct drive Operation range On coil temperature Cooling Max. CDB 43 (13) Heating Min. CDB -5 Refrigerant Control Electronic expansion valve Type R-410A Piping connections Liquid Type Flare connection OD mm 9.52 Gas Type Flare connection Braze connection OD mm Drain PS1B Safety devices Item 01 Thermal potector for fan motor, fuse Electrical Specifications FXMQ125MF FXMQ200MF FXMQ250MF Power supply Phase 1~ Frequency Hz 50 Voltage V Voltage range Min. % -10 Max. % 10 Current Minimum circuit amps (MCA) A Maximum fuse amps (MFA) A 15 Fan motor rated output kw Full load amps (FLA) Fan motor A Ventilation FXMQ-MF 3

6 2 Specifications Notes 2 (1) Cooling: outdoor temp.: 33 CDB, 28 CWB (68%RH), discharge set temperature: 18 CDB, equivalent piping length 7.5m (horizontal) (2) Heating: outdoor temp. 0 CDB, -2.9 CWB (50%RH); discharge set temp. 25 CDB; equivalent piping length: 7.5m (horizontal) (3) Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. (4) The air filter is not a standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method (gravity method) 50% or more. (5) When connected to VRV water-cooled outdoor units a mix of ventilation units and VRV indoor units is not possible (6) Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits. (7) Maximum allowable voltage range variation between phases is 2%. (8) MCA/MFA: MCA = 1.25 x FLA (9) MFA 4 x FLA (10) Next lower standard fuse rating minimum 15A (11) Select wire size based on the value of MCA (12) Instead of a fuse, use a circuit breaker (13) 45% Relative humidity 4 Ventilation FXMQ-MF

7 3 Safety device settings 3 3 Ventilation FXMQ-MF 5

8 4 Options 4 6 Ventilation FXMQ-MF

9 5 Capacity tables 5-1 Cooling/Heating Capacity Tables 3 5 Ventilation FXMQ-MF 7

10 5 Capacity tables 5-1 Cooling/Heating Capacity Tables 5 8 Ventilation FXMQ-MF

11 5 Capacity tables 5-1 Cooling/Heating Capacity Tables 3 5 Ventilation FXMQ-MF 9

12 6 Dimensional drawings 6-1 Dimensional Drawings 6 NOTES 10 Ventilation FXMQ-MF

13 6 Dimensional drawings 6-1 Dimensional Drawings FXMQ200,250MF Piping size (field supply) ø 4.7 hole (All around) Inspection hole 600 or more 650 or more 11x100=1100 (Service space) Discharge side A View 3x100= or more (Service space) Approx. 150 Suction side (Note 2) B x100= ø7 hole (All around) M5 hole (All around) x100= A View 580 5x200= B View ( For FXMQ200MFV1) Indoor unit Gas side Liquid side FXMQ200MFV1 ø 19.1 attached piping ø 9.5 FXMQ250MFV1 ø 22.2 attached piping ø 9.5 Nr Name Description 1 Liquid pipe connection Flare connection 2 Gas pipe connection Attendant piping connection 3 Drain pipe connection PS1B Internal thread Major dia. ø , Minor dia. ø Control box 5 Ground terminal M5 (Inside control box) 6 Name plate Note 1 7 Power supply wiring connection 8 Transmission wiring connection 9 Hanger bracket M10 10 Discharge companion flange 11 Water supply port 12 Attached piping Brazing NOTES 1 Location of unit's name plates: Control box surface. 2 Mount the air filter at the suction side. (Select its colorimethod (gravity method) 50% or more) M5 hole (All around) 5x200= B View ( For FXMQ250MFV1) 3D045128A Ventilation FXMQ-MF 11

14 6 Dimensional drawings 6-2 Dimensional Drawings with Accessories FXMQ125MF or more (Service space) x100= Approx ø4.7 hole (All around) 690 or more (Service space) x100= ø7 hole (All around) 300 or less 5x100= A View (0~250) ~472 Nr Name Description 1 VRV D.P. Unit C. duct type 2 Filter chamber 3 High-efficiency filter 4 Long-life replacement filter 5 Drain pump kit Built-in 6 Drain pipe connection VP25 (O.D. ø 32, I.D. ø 25) (drain pump kit) 7 Water supply port 8 Drain hose Attached to drain pump kit Inspection hole 600 or more ø8 hole (All around) A 222 3x100= x100= D Ventilation FXMQ-MF

15 6 Dimensional drawings 6-2 Dimensional Drawings with Accessories FXMQ MF ø4.7 hole (All around) 11x100= x100= ø7 hole (All around) 11x100= A View 300 or less (0~250) Nr Name Description 1 VRV D.P. Unit C. duct type 2 Filter chamber 3 High-efficiency filter 4 Long-life replacement filter 5 Drain pump kit Built-in 6 Drain pipe connection VP25 (O.D. ø 32, I.D. ø 25) (drain pump kit) 7 Water supply port 8 Drain hose Attached to drain pump kit or more (Service space) Approx ~ or more (Service space) Inspection hole 600 or more ø8 hole (All around) A 222 3x100= x200= D Ventilation FXMQ-MF 13

16 7 Centre of gravity 7 14 Ventilation FXMQ-MF

17 8 Piping diagrams 3 8 Ventilation FXMQ-MF 15

18 9 Wiring diagrams 9-1 Wiring Diagrams - Single Phase 9 16 Ventilation FXMQ-MF

19 10 Sound data 10-1 Sound Pressure Spectrum FXMQ200MF 3 Octave band sound pressure level db(0db=0.0002μbar) Approximate threshold hearing for continuous noise 10 Octave band center frequency (Hz) 4D NOTES 1 Over All (db): (B, G, N is already rectified) Scale 220V 240V 2 Operating conditons: Power source: V 50Hz Standard condition A External static Pressure: 225Pa (220V), 275Pa (240V) : 220 Hz : 240 Hz 3 Measuring place: Anechoic chamber 4 Location of microphone Discharge Duct Suction Duct 2m 1,5m 1m FXMQ250MF Octave band sound pressure level db(0db=0.0002μbar) Approximate threshold hearing for continuous noise Octave band center frequency (Hz) 4D NOTES 1 Over All (db): (B, G, N is already rectified) Scale 220V 240V 2 Operating conditons: Power source: V 50Hz Standard condition A External static Pressure: 205Pa (220V), 255Pa (240V) : 220 Hz : 240 Hz 3 Measuring place: Anechoic chamber 4 Location of microphone Discharge Duct Suction Duct 2m 1,5m 1m Ventilation FXMQ-MF 17

20 11 Fan characteristics Ventilation FXMQ-MF

21 11 Fan characteristics FXMQ200MF 3 220V-50Hz 240V-50Hz (mmh 2 O) (Pa) (mmh 2 O) (Pa) 11 External static pressure Lower limit of ESP (standard ESP) External static pressure Lower limit of ESP (standard ESP) Air flow (m 3 /min) Air flow (m 3 /min) 3D Ventilation FXMQ-MF 19

22 12 Operation range NOTES Ventilation FXMQ-MF

23 12 Operation range 3 NOTES 12 FXMQ250MF NOTES D046313A Ventilation FXMQ-MF 21

24

25 These products are not within the scope of the Eurovent certification program The present leaflet is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V.. Daikin Europe N.V. has compiled the content of this leaflet to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is copyrighted by Daikin Europe N.V. BARCODE Daikin products are distributed by: Naamloze Vennootschap - Zandvoordestraat 300, B-8400 Oostende - Belgium BE RPR Oostende EEDEN /13 Copyright Daikin The present publication supersedes EEDEN12-205