KE-436C Electronic Lockstitch Pattern Tacker with Stepping Foot and Programming function

Transcription

1 KE436C Electronic Lockstitch Pattern Tacker with Stepping Foot and Programming function Specifications Stitch formation Maximum sewing speed Maximum pattern size (X x Y) Feed mechanism Stitch length No. of stitches Maximum number of stitches Work clamp lifter Work clamp height Rotary hook Wiper device Thread trimmer device Thread takeup device Stepping foot lift amount Stepping foot stroke Safety device Data storage method Motor Weights Power source Single needle lock stitch 2,500 rpm (Pitch 3 mm) 100 x 60 mm max. RθIntermittent feed mechanism (pulsemotor driven mechanism) mm Variable 20,000 stitches (One pattern) Pneumatic type 25 mm max. Shuttle hook (Shuttle hook 2, optional) Standard equipment Standard equipment Standard equipment 18 mm 0 mm, 3 8 mm Builtin stopping mechanism 3.5 floppy disk 2HD / 1.44MB, 2DD Threephase 400 W induction motor Machine head: 56 kg, Operation panel: 2.8 kg, Control box: 9 19 kg (depending on destination) Singlephase 110V, , 240V 3phase , 380, 400 V Maximum electric power consumption; 600 VA Main use *Patterns up to a maximum size of 100 mm x 60 mm can be sewn. For plain stitching of small articles, curtain darts, etc. *Twostage work clamp, light work clamp and inner clamping device (optional) can be used. For attaching items, sewing labels, etc. KE436C 1/8

2 Optional parts Programmer Ref. No. Part name Part code Q ty 1 Programmer assy S Programmer top cover S Programmer lower cover S Keyboard spacer S Keyboard rubber sheet S Keyboard sheet S Tapping screw, pan V M LCD cover S LCD S Inverter, LCD :F1A S Micro fuse, 1A S Tapping screw, pan V M Magnet, A S Magnet, B S Screw, Programmer harness S Inverter harness S Cord bush, KR51 S Programmer under cover S Programmer PCB assy S PROM programmer assy S Option parts 2 EMI core, ESDSR15 S Beard band, L = <For area limitation> 50 Mercury warning label P2 S KE436C 2/8

3 Optional device Inner clamping device KE436C 3/8

4 Optional device Inner clamping device Ref. No. Part name Part code Q ty 600 Inner clamp device set SA Work clamp crank assy, 434E S Work clamp crank holder, A S Work clamp crank holder, B S Reverse cylinder base S Bolt, socket M Bolt, socket M Work clamp crank, LA S Reverse gear Reverse rack Washer Set screw, SM Work clamp plate holder, L Washer, plain S Screw, SM Reverse rod S Reverse cylinder S Bolt, socket M3 35 S Reverse shaft joint S Bolt, socket M Bolt, socket M Bolt, M Nut, 2M Half union, ;Q4M5 S Outer work clamp S Work clamp plate blank, A Screw, flat SM Positioning plate, L Positioning plate, R Screw, pan SM x Washer, plain L Washer, spring Feed plate blank, 434R1 S Inner valve assy, 4 SA Valve setting plate, 45H S Air manifold, 4 S Screw, pan M Washer, spring Washer, plain M Solenoid valve S Valve harness assy, X1 S Valve harness S Valve harness, 24V S Half union, ;Q4M5 S Regulator assy S Regulator S Joint, S Screw, pan M Air tube, 4L = 300 S Air tube, RV3A L = 1600 S Air tube, RV3B L = 1600 S Tying band, KE436C 4/8

5 Different parts list Spec. Part name Needle hole plate Bobbin case assy Option parts Standard parts Option parts Mediumweight materials Heavyweight materials Extra heavyweight materials (φ2.2) S <FM> (φ2.6) S <E> <A> <B> S <LC> Tension spring <A> <B> Screw Spring, antispin <A> Bobbin <B> S <LAN> Shuttle hook assy w/box SA <A> SA <B> SA <LF> SA <LG> Shuttle race body A <B> Spring, tension S <C> Thread takeup spring <B> Needle bar thread guide S <B> S <A> S <B> : Common with the LK3 B430E. : Common with the BAS 311E. KE436C 5/8

6 Different parts list Part name Spec. Option parts Standard parts Option parts Mediumweight materials Heavyweight materials Extra heavyweight materials Needle assy DP x 5 <#14> SA DP x 17NY <#19> SA DP x 17 <#25> SA Needle DP 5 <#14> DP 17 NY <#19> S DP 17 <#25> Work clamp LEFT 434E SF2 S RIGHT S434E SF2 S Feed plate 434E SF2 S : Common with the LK3 B430E. : Common with the BAS 311E. KE436C 6/8

7 Gauge parts list Optional gauges are listed in the following table. Each work clamp pair is used in combination with the feed plate directly below them. L R For onetouch work clamp assy S (434E SF) S (434E SF) Work clamp S (A) S (B) S (C) Feed plate A: t = 0.5 B: t = 1.0 C: t = 2.0 Gauge assy, 434E MK2 S Home position standard plate S Screw, w/socket SM4.37 S KE436C 7/8

8 Gauge parts list Needle hole plate A S AF S BZ S D S E S ED S (For heavyweight materials) F S FD S FM S FZ S H S L S M S countersink S (For mediumweight materials) KE436C 8/8