CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: ENDA-5000 with analysing module CMA-5800 for NOx. S0 2, CO, co2 and 02
|
|
- Winifred Richardson
- 6 years ago
- Views:
Transcription
1 Umwelt Bundes For our Environment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: Certified AMS: : Test Institute: with analysing module CMA-5800 for NOx. S0, CO, co and 0 Kaplanstr Tulln Austria Energie und Umwelt GmbH This is to certify that the AMS has been tested and found to comply with: EN : 009, EN 1567-: 009, EN : 008 and EN 14181: 004 Certification is awarded in respect of the conditions stated in this certificate (see also the following pages). ~-.t~ tuv.c 0 / A ~~ - - ::;. luvrheinland ::;: ~ ~ 1:>... ~ ooooo~l5\) Publication in the German Federal Gazette (BAnz.) of 0 March 01 Umweltbundesamt Dessau, 16 March 01 EN tested QAL 1 certified TUV approved Annual inspection The certificate is valid until: 01 March 017 Energie und Umwelt GmbH Köln, 15 March 01 i.~li:ns~achim Hummel ppa. Dr. Peter Wilbring I teu@umwelt-tuv.de Tel TUV Rheinland Energie und Umwelt GmbH Am Grauen Stein Köln Accreditation accordinq to EN ISOliEG 1705 and certified accordinq to ISO 9001:008. qa11.de info@qal1.de page 1 of9
2 : of 18 October 011 First certification: 0 March 01 Validity ends: 01 March 017 Publication: BAnz. 0 March 01, No. 36, p. 90, chapter I, No. 4.5 Approved application The tested AMS is suitable for use at combustion plants according to EC directive EC, at waste incineration plants according to EC directive EC and other plants requiring official approval. The tested ranges have been chosen with respect to the wide application range of the AMS. The suitability of the AMS for this application was assessed on the basis of a laboratory test and a five months field test at a municipal waste incinerator. The AMS is approved for an ambient temperature range of +5 C to +40 C. Any potential user should ensure, in consultation with the manufacturer, that this AMS is suitable for the installation at which it will be installed. Basis of the certification This certification is based on: test report dated 18 October 011 of Energie und Umwelt GmbH suitability announced by the German Environmental Agency (UBA) as the relevant body the ongoing surveillance of the product and the manufacturing process publication in the German Federal Gazette (BAnz. 0 March 01, No. 36, p. 90, chapter I, No. 4.5, announcement by UBA from 3 February 01) qal1.de info@qal1.de page of 9
3 AMS name: with analysing module CMA-5800 for NO x, SO, CO, CO and O :, Tulln, Austria Field of application: For measurements at plants requiring official approval (i. e. plants in EC, waste incineration directive and EC large combustion plants directive) Measuring ranges during the suitability test: Component Certification range supplementary Unit measurement ranges NO x ) ) mg/m³ SO mg/m³ CO mg/m³ CO Vol.-% O Vol.-% 1) as NO, this corresponds to app mg/m³ NO ) as NO, this corresponds to app mg/m³ NO Software version: P I Restrictions: None Note: A four weeks period has been specified as maintenance interval with a reservoir size of 40 l for the phosphoric acid. : Energie und Umwelt GmbH, Köln Report No.: dated 18 October 011 qal1.de info@qal1.de page 3 of 9
4 Certified product This certificate applies to automated measurement systems confirming to the following description: The measuring system is a multicomponent gas analyser for the measurement of emissions. The analyser of the type series is a measuring device to observe continuously the concentration of NO x, SO, CO, CO and O at stationary emission sources. It measures simultaneously the five above listed gas components. The system measures the concentration of the components NO x, SO, CO, CO and O in dry conditions because the moisture from the measuring gas is removed with help of sample gas chillers. For the measuring channels NO x, SO, CO and CO the non-dispersive infrared ray absorptiometry with cross modulation system (NDIR) is used. For the determination of the oxygen concentration a magneto-pneumatic system (MPA) is applied, which is free from cylinder gas as a carrier gas. For the minimisation of the SO losses in the sample conditioning system a 10 percent phosphoric acid is added upstream of the sample gas chiller into the hot sample gas. General notes This certificate is based upon the equipment tested. The manufacturer is responsible for ensuring that on-going production complies with the requirements of the EN The manufacturer is required to maintain an approved quality management system controlling the manufacture of the certified product. Both the product and the quality management systems shall be subject to regular surveillance. If a product of the current production does not conform to the certified product, Energie und Umwelt GmbH must be notified at the address given on page 1. A certification mark with an ID-Number that is specific to the certified product is presented on page 1 of this certificate. This can be applied to the product or used in publicity material for the certified product. This document as well as the certification mark remains property of Energie und Umwelt GmbH. With revocation of the publication the certificate looses its validity. After the expiration of the validity of the certificate and on requests of the Energie und Umwelt GmbH this document shall be returned and the certificate mark must not be employed anymore. The relevant version of this certificate and the validity is also accessible on the internet Address: qal1.de. Certification of with analysing module CMA-5800 for NO x, SO, CO, CO and O is based on the documents listed below and the regular, continuous monitoring of the Quality Management System of the manufacturer: Initial certification according to EN 1567 Certificate No : 16 March 01 Validity of the certificate: 01 March 017 : of 18 October 011 Energie und Umwelt GmbH, Köln Publication: BAnz. 0 March 01, No. 36, p. 90, chapter I, No. 4.5: Announcement by UBA from 3 February 01 qal1.de info@qal1.de page 4 of 9
5 NDIR Measured component NO Certification range mg/m³ Sum of positive CS at zero point 1.30 mg/m³ Sum of negative CS at zero point 0.00 mg/m³ Sum of postive CS at reference point 3.00 mg/m³ Sum of negative CS at reference point 0.00 mg/m³ Maximum sum of cross sensitivities 3.00 mg/m³ Uncertainty of cross sensitivity 1.73 mg/m³ Standard deviation from paired measurements under field conditions * u D 0.37 mg/m³ (mg/m³)² Lack of fit u lof mg/m³ (mg/m³)² Zero drift from field test u d,z mg/m³ 0.95 (mg/m³)² Span drift from field test u d,s mg/m³.393 (mg/m³)² Influence of ambient temperature at span u t mg/m³ (mg/m³)² Influence of supply voltage u v mg/m³ (mg/m³)² Cross sensitivity (interference) u i 1.73 mg/m³ (mg/m³)² Influence of sample gas flow u p 0.04 mg/m³ 0.04 (mg/m³)² Uncertainty of reference material at 70% of certification range u rm mg/m³ (mg/m³)² Converter efficiency for AMS measuring NOx u ce mg/m³ (mg/m³)² Combined standard uncertainty (u C) u c 3.38 mg/m³ Total expanded uncertainty U = u c * k = u c * mg/m³ Relative total expanded uncertainty U in % of the ELV 131 mg/m³ 5.1 Requirement of 000/76/EC and 001/80/EC U in % of the ELV 131 mg/m³ 0.0 Requirement of EN U in % of the ELV 131 mg/m³ 15.0 qal1.de info@qal1.de page 5 of 9
6 NDIR Measured component SO Certification range 0-75 mg/m³ Sum of positive CS at zero point.85 mg/m³ Sum of negative CS at zero point 0.00 mg/m³ Sum of postive CS at reference point.80 mg/m³ Sum of negative CS at reference point mg/m³ Maximum sum of cross sensitivities.85 mg/m³ Uncertainty of cross sensitivity mg/m³ Standard deviation from paired measurements under field conditions * u D mg/m³ (mg/m³)² Lack of fit u lof mg/m³ 0.10 (mg/m³)² Zero drift from field test u d,z mg/m³ (mg/m³)² Span drift from field test u d,s mg/m³ (mg/m³)² Influence of ambient temperature at span u t mg/m³ (mg/m³)² Influence of supply voltage u v mg/m³ (mg/m³)² Cross sensitivity (interference) u i mg/m³.708 (mg/m³)² Influence of sample gas flow u p mg/m³ 0.00 (mg/m³)² Uncertainty of reference material at 70% of certification range u rm mg/m³ (mg/m³)² Combined standard uncertainty (u C) u c.5 mg/m³ Total expanded uncertainty U = u c * k = u c * mg/m³ Relative total expanded uncertainty U in % of the ELV 50 mg/m³ 8.8 Requirement of 000/76/EC and 001/80/EC U in % of the ELV 50 mg/m³ 0.0 Requirement of EN U in % of the ELV 50 mg/m³ 15.0 qal1.de info@qal1.de page 6 of 9
7 NDIR Measured component CO Certification range 0-50 mg/m³ Sum of positive CS at zero point 1.3 mg/m³ Sum of negative CS at zero point 0.00 mg/m³ Sum of postive CS at reference point 1.30 mg/m³ Sum of negative CS at reference point 0.00 mg/m³ Maximum sum of cross sensitivities 1.30 mg/m³ Uncertainty of cross sensitivity mg/m³ Repeatability standard deviation at set point * u r mg/m³ 0.43 (mg/m³)² Lack of fit u lof mg/m³ (mg/m³)² Zero drift from field test u d,z mg/m³ (mg/m³)² Span drift from field test u d,s mg/m³ 0.43 (mg/m³)² Influence of ambient temperature at span u t mg/m³ (mg/m³)² Influence of supply voltage u v mg/m³ 0.07 (mg/m³)² Cross sensitivity (interference) u i mg/m³ (mg/m³)² Influence of sample gas flow u p mg/m³ (mg/m³)² Uncertainty of reference material at 70% of certification range u rm mg/m³ (mg/m³)² Combined standard uncertainty (u C) u c 1.43 mg/m³ Total expanded uncertainty U = u c * k = u c * mg/m³ Relative total expanded uncertainty U in % of the ELV 50 mg/m³ 5.6 Requirement of 000/76/EC and 001/80/EC U in % of the ELV 50 mg/m³ 10.0 Requirement of EN U in % of the ELV 50 mg/m³ 7.5 qal1.de info@qal1.de page 7 of 9
8 NDIR Measured component CO Certification range 0-0 Vol.-% Sum of positive CS at zero point 0.00 Vol.-% Sum of negative CS at zero point 0.00 Vol.-% Sum of postive CS at reference point 0.00 Vol.-% Sum of negative CS at reference point Vol.-% Maximum sum of cross sensitivities Vol.-% Uncertainty of cross sensitivity Vol.-% Standard deviation from paired measurements under field conditions * u D Vol.-% (Vol.-%)² Lack of fit u lof Vol.-% (Vol.-%)² Zero drift from field test u d,z Vol.-% (Vol.-%)² Span drift from field test u d,s Vol.-% (Vol.-%)² Influence of ambient temperature at span u t Vol.-% (Vol.-%)² Influence of supply voltage u v Vol.-% (Vol.-%)² Cross sensitivity (interference) u i Vol.-% 0.01 (Vol.-%)² Influence of sample gas flow u p Vol.-% (Vol.-%)² Uncertainty of reference material at 70% of certification range u rm 0.16 Vol.-% 0.06 (Vol.-%)² Combined standard uncertainty (u C) u c 0.4 Vol.-% Total expanded uncertainty U = u c * k = u c * Vol.-% Relative total expanded uncertainty U in % of the ELV 0 Vol.-% 4.1 Requirement of 000/76/EC and 001/80/EC U in % of the ELV 0 Vol.-% 10.0 Requirement of EN U in % of the ELV 0 Vol.-% 7.5 ** For this component no requirements in the EC-directives 001/80/EG und 000/76/EG are given. The chosen value is recommended by the certification body. qal1.de info@qal1.de page 8 of 9
9 Paramagnetism Measured component O Certification range 0-5 Vol.-% Sum of positive CS at zero point 0.00 Vol.-% Sum of negative CS at zero point 0.00 Vol.-% Sum of postive CS at reference point 0.00 Vol.-% Sum of negative CS at reference point Vol.-% Maximum sum of cross sensitivities Vol.-% Uncertainty of cross sensitivity Vol.-% Standard deviation from paired measurements under field conditions * u D Vol.-% (Vol.-%)² Lack of fit u lof Vol.-% 0.00 (Vol.-%)² Zero drift from field test u d,z Vol.-% (Vol.-%)² Span drift from field test u d,s Vol.-% (Vol.-%)² Influence of ambient temperature at span u t Vol.-% (Vol.-%)² Influence of supply voltage u v 0.07 Vol.-% (Vol.-%)² Cross sensitivity (interference) u i Vol.-% 0.01 (Vol.-%)² Influence of sample gas flow u p Vol.-% 0.00 (Vol.-%)² Uncertainty of reference material at 70% of certification range u rm 0.0 Vol.-% (Vol.-%)² Combined standard uncertainty (u C ) u c 0.8 Vol.-% Total expanded uncertainty U = u c * k = u c * Vol.-% Relative total expanded uncertainty U in % of the range 5 Vol.-%. Requirement of 000/76/EC and 001/80/EC U in % of the range 5 Vol.-% 10,0 Requirement of EN U in % of the range 5 Vol.-% 7,5 ** For this component no requirements in the EC-directives 001/80/EG und 000/76/EG are given. The chosen value is recommended by the certification body. qal1.de info@qal1.de page 9 of 9
CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 28 July 2016
I Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity {QAL 1) Number of Certificate: 0000001013_01 ------------------------------------------------------------------
More informationCERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: _02
Umwelt Bundes Amt For our Environment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000001014_02 Certified AMS: Manufacturer: Test Institute: 4500
More informationCERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19July2017. Köln, 17 August2012
Umwelt Bundes Amt For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1} Number of Certificate: 0000036942 Certified AMS: Manufacturer: Test Institute: Dusthunter
More informationCertificate: _01 / 29 April 2014
Test report: 936/21212540/D of 08 October 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 01 April 2014 B12, chapter I, No. 2.2 Approved application The tested
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland'ä` Procis Iy Ftight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000032301_01 AMs designation: fornox, S02, CO, C02and 02 Manufacturer: Test Laboratory: HORIBA Europe GmbH
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000050625 Certified AMS: Manufacturer: Test lnstitute: A02000-Fidas24 for TOC ABB Automation GmbH Stierstädter
More informationCertificate: / 9 September 2014
: of 3 April 014 Initial certification: 5 August 014 Expiry date: 4 August 019 Publication: BAnz AT 5 August 014 B11, chapter I, no. 5. Approved application The tested AMS is suitable for use at combustion
More informationCertificate: _02 / 9 September 2014
: of 3 April 014 Initial certification: 1 February 010 Expiry date: 11 February 015 Publication: BAnz AT 5 August 014 B11, chapter I, no. 4.5 Approved application The tested AMS is suitable for use at
More informationCERTIFICATE of Product Conformity (QAL1 )
TüVF=hein and'] f Pracisely F±ight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053814 AMs designation: A02000-Magnos28 for 02 Manufacturer: Test Laboratory: ABB Automation GmbH Stierstädter
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000028731 01 Certified AMS: Manufacturer: Test lnstitute: D-R 800 for dust DUFUG GmbH Kollaustraße 105 22453 Hamburg
More informationCertificate: _01 / 2 February 2015
Test report: 936/21210059/A of 21 October 2009 Initial certification: 12 February 2010 Certificate: renewal (previous certificate 0000025931 of 10 March 2010 valid until 11 February 2015) Expiry date:
More informationCertificate: / 9 February 2011
Test report: 936/21212470/A of 1 October 2010 First certification: 26 January 2011 Run of validity until: 25 January 2016 Publication BAnz. 26 January 2011, No. 14, p. 294, Chapter I No. 1.1 Approved application
More informationCERTIFICATE. about Product Conformity {QAL 1) Number of Certificate: _02
Umwelt Bundes Amt For our Environment /;;;!. TÜVRheinland Precisely Right. CERTIFICATE about Product Conformity {QAL 1) Number of Certificate: 0000026912_02 Certified AMS: Manufacturer: Test Institute:
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000035015 03 Certified AMS: Manufacturer: Test lnstitute: MERCEM300Z for Hg SICK AG Rengol9shauser Str. 17 a 88662
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No. : 0000028749 01 Certified AMS: Manufacturer: Test lnstitute: D-R 290 for dust DUFLAG GmbH Kollaustraße 105 22453
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVF}heinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000059868 AMs designation: Manufacturer: Test Laboratory: FIDAMAT 6 MEASURING SYSTEM fortoc SIEMENS AG Östliche
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely F}ight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053803 Certified AMS: Manufacturer: Test lnstitute: D-R 808 for dust DURAG GmbH Kollaustr.105 Hamburg German
More informationCertificate: / 29 April 2014
Test report: 936/21217455/A of 10 September 2013 Initial certification: 01 April 2014 Expiry date: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter I, No. 1.1 Approved application The tested
More informationCertificate: _02 / 22 March 2013
Test report: 936/21216334/D of 17 September 2012 Initial certification: 02 March 2012 Expiry date: 01 March 2017 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.1 Approved application The tested
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland{ ' Precisely Föght CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000038496_01 AMs designation: Manufacturer: Test Laboratory: PCME QAL 181 fortotaldust PCME Ltd. 60 Edison Road
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland'S' Pretisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000037054_01 AMs designation: Manufacturer: Test Laboratory: EM-D 5100fordust HORIBA GmbH Kaplanstraße 5 3430
More informationCertificate: _01 / 20 August 2013
Test report: 936/21218492/B of 22 January 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 23 July 2013 B4, chapter II, No. 2.2 Approved application The tested
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Ceriificate No.: 0000028729_02 Certified AMS: Manufacturer: Test lnstitute: GM700-2 for HF SICK AG Nimburger Str. 11 79276 Reute
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Cerlificate number: 0000051693_03 Certified AMS: Manufacturer: Test lnstitute: HM 1400 TRX for mercury DURAG GmbH Kollaustraße 105
More informationCERTIFICATE of Product Conformity (QAL1)
ATÜVRheinland Precisely F=ight. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000036943 02 Certified AMS: Manufacturer: Test lnstitute: DUSTHUNTER SB100 for dust SICK Engineering GmbH Bergener
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Ceriificate No.: 0000036942 01 Certified AMS: Manufacturer: Test lnstitute: DUSTHUNTER C200 for dust SICK Engineering GmbH Bergener
More informationCERTIFICATE of Product Conformity (QAL1)
JÄ TÜVF=heinland`:.ä;' Preci ely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000038506 02 AMs designation: lvlanufacturer: Test Laboratory: Modell 6888Afor02 Rosemount l nc. 8200
More informationCERTIFICATE of Product Conformity (QAL1 ) Certificate No.: _03. V-CEM5100 for waste gas velocity. TÜV Rheinland Energy GmbH
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000035006_03 Certified AMS: Manufacturer: V-CEM5100 for waste gas velocity CODEL lnternational Ltd. Station Road,
More informationCertificate: _01 / 22 March 2013
Test report: 936/21219384/A of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.6 Approved application The tested
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland`jR' Procis ly Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053816 AMs designation: Manufacturer: Test Laboratory: U3600-QALl for dust Auburn systems LLC S Electronics
More informationCertificate: _01 / 22 March 2013
Test report: 936/21219384/B of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.5 Approved application The tested
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate number: 0000001014_03 Certified AMS: Manufacturer: Test lnstitute: 4500 MKlll for dust Land lnstruments lnternational
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No. : 0000027201 01 Certified AMS: Manufacturer: Test lnstitute: OPSIS SM 200 with pmio-pre-separator OPSIS AB Box 244
More informationCERTIFICATE of Product Conformity (QAL1)
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000036945_02 Certified AMS: Manufacturer: Test lnstitute: DUSTHUNTER SP100 for dust SICK Engineering GmbH Bergener
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053812 Certified AMS: Manufacturer: Test lnstitute: FDM 11 Standard (dust monitor) PCME Ltd. Clearview Building
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland'ä ' Prcciscly Ftight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000056508_01 AMs designation: Manufacturer: Test Laboratory: LDS 6 7M86121 with cd 6 7M86122 sensorfor NH3
More informationCERTIFICATE of Product Conformity (QAL1)
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000037051 01 Certified AMS: Manufacturer: Test lnstitute: GM32 ln-situ-gasanalysator model Cross Duct for NO and
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland']B:' Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Ceriificate No.: 0000028733 02 AMs designation: Manufacturer: SWAM 5a Dual Channel Monitor, SWAM 5a Dual Channel Hourly Mode
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland`E' Pnetisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 00000038503_02 AMs designation: Manufacturer: Test Laboratory: 300E/T300forco Teledyne Advanced pollution lnstrumentation
More informationCertificate: _01 / 19 August 2011
Test report: 936/21209919/A of 26 March 2010 First certification: 02 August 2010 Run of validity until: 01 August 2015 Publication BAnz. 28 July 2010, No 111, page 2598 Approved application The AMS is
More informationCERTIFICATE of Product Conformity (QAL1)
JÄ TüVFtheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000039320_01 AMsdesignation: Manufacturer: Test Laboratory: Modell49ifor03 Thermo Fisher scientific 27 Forge
More information_03 / 28 July 2015
Test report: 936/21221789/B of 19 March 2013 Initial certification: 02 August 2010 Certificate: renewal (previous certificate 0000027277_02 of 20 August 2013 valid until 01 August 2015) Date of expiry:
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland'E' Pnecis W Ftight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000038504_02 AMs designation: Manufacturer: Test Laboratory: 400E/T400for03 Teledyne Advanced pollution lnstrumentation
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate number: 0000028733_01 Certified AMS: Manufacturer: SWAM 5a Dual Channel Monitor for PMio and PM2,5 FAl lnstruments s.r.l.
More informationCertificate: / 29 April 2014
Test report: 936/21209885/F of 20 September 2013 Initial certification: 01 April 2014 Date of expiry: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter IV, No. 6.3 Approved application The
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053810 08 Certified AMS: : Test lnstitute: Set CEM CERT 7M81957 for CO, NO, S0, C0, N0, NOx and 0 Östliche
More informationCONFIRMATION of Product Conformity (QAL1)
CONFIRMATION of Product Conformity (QAL1) AMS designation: Manufacturer: Test Laboratory: Fidas 200 S, Fidas 200 and Fidas 200 E for suspended particulate matter PM 10 and PM 2,5 PALAS GmbH Greschbachstraße
More informationCertificate: / 29 April / /D1 of 07 July 2006 Addendum 936/ /C of 20 September 2013
Test report: Initial certification: 01 April 2014 Date of expiry: 31 March 2019 Certificate: 936/21203248/D1 of 07 July 2006 Addendum 936/21221382/C of 20 September 2013 Publication: BAnz AT 01 April 2014
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the StackFlowMaster System Manufactured by: ABB Ltd Oldends Lane Stonehouse Gloucestershire GL10 3TA Has been assessed by Sira Certification Service
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the D-R 290 Opacity and Dust Concentration Monitor manufactured by: DURAG GmbH Kollaustraße 105 22453 Hamburg Germany has been assessed by Sira Certification
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the V-CEM5100 Flow Monitor Manufactured by: Codel International Ltd, Station Road Bakewell Great Britain Has been assessed by Sira Certification Service
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the FIDAMAT 6 FID Analyser manufactured by: Siemens Production Automisation S.A.S. 1 Chemin de la Sandlach B.P. 189 F-67506 Haguenau Cedex France
More informationPRODUCT CONFORMITY CERTIFICATE AR500 Open Path Monitor with ER120
RAP-266 PRODUCT CONFORMITY CERTIFICATE AR500 Open Path Monitor with ER120, MCERTS, Sira Certification Service, Kent, UK, 2 February, 14 June 2016 PRODUCT CONFORMITY CERTIFICATE This is to certify that
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the AR500 Open Path Monitor Manufactured by: Opsis AB PO Box 244 5-244 02 Furulund Sweden Has been assessed by Sira Certification Service And for
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the AMESA D Isokinetic Dioxin Sampling System Manufactured by: Environnement S.A. Deutschland Benzstraße 11 61352 Bad Homburg Germany has been assessed
More informationEmissioni convogliate in atmosfera: Sistemi di monitoraggio in continuo delle emissioni SME
Emissioni convogliate in atmosfera: Sistemi di monitoraggio in continuo delle emissioni SME Aspetti gestionali e verifiche periodiche (norma UNI EN 14181:2015) Walter Battaglia - Alessandro Migatta - Sandro
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride
More informationComplete Gas Analysis
Complete Gas Analysis A complete range of gas analysers, systems and accessories for emissions, air quality, research and process monitoring. The Signal Group, incorporating the gas analysis business of
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the 3000HM Flame Ionisation Detector 3010 & 3030 Portable Flame Ionisation Detector manufactured by: Signal Group Ltd 12 Doman Road Camberley Surrey,
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the GC 866 PID airtoxic (Model A73022) manufactured by: Chromatotec / airmotec 15, Rue d Artiguelongue Saint -Antoine 33240 Val de Virvée France has
More informationTest reports for the determination of B 10d values for emergency stop switches of families 800F, 800H, 800T and D7 of Rockwell Automation
Report about the inspection of test reports for the determination of B 10d values for emergency stop switches of families, 800H, 800T and of Rockwell Automation Report-No.: 968/EL 660.01/10 Date: 2010-06-08
More informationcontinuous emissions monitoring Combustion & Environmental Monitoring
continuous emissions monitoring Combustion & Environmental Monitoring Advanced CEM technology for accurate measurement and high reliability - to meet today s regulatory requirements and ready for future
More informationincluding the locations according to annex
Certificate Certificate Holder: Siemens Factory Automation Engineering Ltd. Registration Address: No. 1, Jiuxianqiao East Rd., Chaoyang Operation Address: Building A1, No. 9, Jiuxianqiao East Rd., Chaoyang
More informationInternational comparison of validation methods for dust concentration measurement
International comparison of validation methods for dust concentration measurement Validation of dust monitors can be divided into 2 steps: 1. Validation of a generic dust monitor as an instrument (Type
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11120-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 16.01.2018 to 15.01.2023 Holder of certificate: TÜV
More informationDatasheet: K-22 LO Sensor
Datasheet: K-22 LO Sensor The K- 22 LO is a CO2 sensor module designed to be built- in into stationary ventilation equipment, such as window vent or duct exhaust actuators, serving as a linear transmitter
More informationProforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986
Ministry of Environment & Forests, New Delhi Central Pollution Control Board, Delhi Proforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986 Surveillance
More informationAutomation, Software und Informationstechnologie
Automation, Software und Informationstechnologie Report on the type approval of the Adjustable Frequency AC Drives PowerFlex 753 and 755 of Rockwell Automation Inc. Bericht-Nr.: 968/EZ 334.00/08 Datum:
More informationThis SOP and the B.C. Field Sampling Manual are available at: www2.gov.bc.ca.
Monitoring Parameter: Methane and Non-Methane Hydrocarbons Revision No: Draft Revision Date: 09 April, 2018 Title: Standard Operating Procedure for the Non-Continuous Measurement of Ambient Methane and
More informationVentostat Wall Mount. Amphenol Advanced Sensors. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. Features:
Ventostat Wall Mount Telaire Wall Mount, Humidity and Temperature Transmitters Features: Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low cost package. Patented
More informationALTAIR 5X Multigas Detector Product Specification
ALTAIR 5X Multigas Detector Product Specification PHYSICAL CHARACTERISTICS Gas delivery Size, pumped unit without IR Size, pumped unit with IR Weight Handling Case material Environmental protection Display
More informationVentostat Wall Mount. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. GE Sensing & Inspection Technologies.
GE Sensing & Inspection Technologies Ventostat Wall Mount Telaire Wall Mount, Humidity and Temperature Transmitters Features: Patented, Absorption Infrared Gas sensing engine provides high accuracy in
More informationVentostat Wall Mount. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. GE Sensing & Inspection Technologies.
GE Sensing & Inspection Technologies Ventostat Wall Mount Telaire Wall Mount, Humidity and Temperature Transmitters Features: Patented, Absorption Infrared Gas sensing engine provides high accuracy in
More informationGlenside Environmental Services Ltd
Unit 18 Great Island Industrial Park, Ballincollig, Co. Cork. Testing Laboratory Registration number: 322T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule
More informationThe Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives
European The Impact of Marking Requirements on Design and Performance of Power Converters and Electrical Drives Harmonization of Standards The Key to the European Market C onfused E urope EN 600204 BS...
More informationNO NO 2 NO x SO 2 CO CO 2 O 2
continuous emissions monitoring NO NO 2 NO x SO 2 CO CO 2 O 2 Combustion & Environmental Monitoring An Company Advanced CEM technology for accurate measurement and high reliability - to meet today s regulatory
More informationSAMPLE SPECIFICATIONS CONTINUOUS MONITORING SYSTEM (Insitu)
PART 1 - GENERAL A. RELATED DOCUMENTS SAMPLE SPECIFICATIONS CONTINUOUS MONITORING SYSTEM (Insitu) Federal, State, and local requirements as applicable. Attached Permit Attached drawings B. SUMMARY 1. Provide
More informationInstallation and operation manual DPC200 - DIFFERENTIAL PRESSURE CONTROLLER. Low pressure with PI-control-mode
Installation and operation manual DPC200 - DIFFERENTIAL PRESSURE CONTROLLER Low pressure with PI-control-mode Manufacturer: Phone: Fax: E-Mail: Website: Issue: Doc.-no.: Arthur Grillo GmbH Am Sandbach
More informationThe new generation of Multi-Gas measurement. Dipl.- Ing (FH) Andreas Hester, SIGAS Corp. Environment protection Personal safety Process control
The new generation of Multi-Gas measurement Dipl.- Ing (FH) Andreas Hester, SIGAS Corp. Environment protection Personal safety Process control Today our environment is more and more contaminated by critical
More informationPCT Workshop Before you leave the office
Before you leave the office Documentation Suitable Equipment Calibration Training Preparation Documentation Currently documentation for the scheme consists of: Association Of Noise Consultants PCT Registration
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK St laise House Vaughan Street radford West Yorkshire D1 2LL ontact: Mr A R Pullen Tel: +44 (0)1274 738668 Fax: +44 (0)1274 738758 E-Mail: technical@envirocare.org
More informationProduct data sheet Palas Fidas 200 S
Product data sheet Palas Fidas 200 S Applications Regulatory environmental monitoring in measuring networks Ambient air measurement campaigns Oriented indicative measurements (spot checks) Long-term studies
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
More informationSystem Components and Accessories for Sample Gas Conditioning. Data Sheet 10/ EN June 2004
System Components and Accessories for Sample Gas Conditioning Data Sheet 0/3-5.0 EN June 004 Vol.% A gas analysis system usually consists of two groups of devices: The gas analyzer measures the concentrations
More informationProduct Overview. Ordering Information DM-LK-D10 DM-LK-D10-C. Dust & Opacity Meter Complete Set Controller Unit. Sender Receiver SDS-V5 SDR-V4 HPB-82S
D10 is a type-approved measuring device which combines the advantages of the measuring principles transmittance and scattered light forward. Therefore, it is ideal for measurement of very low to high dust
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationSupplementary Installation and Operating Instructions. Category II2G
Supplementary Installation and Operating Instructions Flap-type Flow Meter Category II2G 2 Contents 1. General safety directions...3 2. Main safety-relevant characteristics...4 2.1. Category / Zone...4
More informationUniversal Gripper UG 16, UG 18. Operating Instructions
Universal Gripper UG 16, UG 18 Operating Instructions These operating instructions apply to: Type Order No. UG 16 50032667 UG 18 50032666 Version of this documentation: UG 16-UG 18-BA-vers.1.6 gb. 30.10.07.doc
More informationShipboard incinerators with capacities up to 4000 kw
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for Marine Equipment Directive (MED) No. 431.90 - MED A.1/2.7 Shipboard incinerators with capacities up to 4000 kw JANUARY
More informationPUBLIC SUMMARY REPORT OF THE EGOLF EN 13823
PUBLIC SUMMARY REPORT OF THE EGOLF EN 13823 ROUND ROBIN 2015-2016 Authors: Anne Steen-Hansen, RISE Fire Research Nick Neumann, MFPA Leipzig Richard Johansson, RISE Safety Marina Andersson, RISE Safety
More informationPED Workshop Nicosia, 3-5 October, 2005
EU Trade Policy in the Pressure Equipment Sector An Industry Perspective PED Workshop Nicosia, 3-5 October, 2005 Frank Wohnsland VDMA German Engineering Federation Page 1 4 October 2005 Our platform We,
More informationWIO200 Water In Oil measuring instrument
WIO200 Water In Oil measuring instrument You have made the right decision by choosing a measuring instrument from PAJ Systemteknik. Many customers buy our high standard products every year. There are at
More informationFIDAS FINE DUST MONITORING SYSTEMS
FIDAS FINE DUST MONITORING SYSTEMS Fidas 200 S The world s only certified optical fine dust measurement system with single particle analysis for PM 2. 5 PM 10 1 APPLICATIONS Measurements at workplaces
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationDeclaration of conformity - Safety relays 14:2. Declaration of conformity - JSBR4 14:3. Declaration of conformity - Vital 1 14:4
Contents Page Declaration of conformity - Safety relays 14:2 Declaration of conformity - JSBR4 14:3 Declaration of conformity - Vital 1 14:4 Declaration of conformity - Eden, Tina, FMC-Tina and Magne 14:5
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance specifications and test procedures for automated measuring systems for monitoring emissions
More informationProduct- and Environment Data Sheet Page: 1/5 Date: Date of revision:
Product- and Environment Data Sheet Page: 1/5 1 Company Manufacturer/Supplier: Konica Minolta Business Solutions Europe GmbH Tel.:+49/511/7404-0 Address: D-30855 Langenhagen, Europaallee 17 Fax:+49/511/741050
More informationFlame Monitor for Multiple Burner Furnaces D-LE 603 D-UG 660
Selectivity Adjustable by Means of - High Pass Frequency Filter - Gain - Threshold Different Adjustments for Different Conditions (e.g. According Fuel or Combustion Technology) Possible, to be Activated
More informationOPTIBAR DP 7060 Supplementary Instructions
OPTIBAR DP 7060 Supplementary Instructions Differential pressure transmitter Category ATEX II 1/2G, 2G Ex db ia IIC T6...T1 Ga/Gb, Gb IECEx Ex db ia IIC T6...T1 Ga/Gb, Gb Housing Aluminium: Single chamber,
More information