Umbrellas, Lighting & Weather Accessories

Transcription

1 Umbrellas, Lighting & Weather Accessories

2 Accessories Contents Introduction 1 Architectural Umbrellas 2 Models 3 Colours 4 Heating & Cooling 5 Lighting 6 Weather Accessories 7 Maintenance 15 Celmec International Pty Ltd ACN Melbourne Tel: Fax: Sydney Tel: Fax: Adelaide Tel: Fax:

3 Accessories Celmec International Leading the way in Air Control, Heating & Cooling At Celmec International, it is our belief that working closely with our clients aids the mutual success of both organisations and for this reason we have adopted the following mission: To excel in the commercial and industrial building industry by setting new standards with innovative products through leadership, first class customer service and engineering excellence. It is with confidence that we at Celmec International offer Umbrellas, Lighting and Weather Accessories as part of our unique product range. We trust that this concise brochure will assist all users in the area of application and design

4 Architectural Umbrellas Umbrellas Architectural Umbrellas from Celmec are available in a range of shapes and sizes, with central and side masts and are collapsable in some models. Colour and branding options along with a range of accessories, allows the umbrellas to be customised for every project. Frame construction All steel frame construction and wind rated, the frames are made from rust resistant, hot-sprayed zinc and aluminium galvanised tubular steel with a 2 layer powder-coated finish, alternatively from marine-grade 316 stainless steel. Exposed fittings For all models, exposed fittings, cables and connectors are manufactured from marine grade 316 stainless steel. Membrane The PVC canopy is waterproof, UV resistant, anti-fungal, easy-clean PVDF coated, for long life and low maintenance. Wind rating The standard HeatRay umbrella withstands high wind loads of up to 120km/h (75 miles/h). An optional upgrade is available on some models. Umbrella Installation HeatRay Umbrellas can be installed in any location; on timber decks, balconies and roof terraces or can be set into a concrete footing. Accessories Heaters Evaporative Cooling Lighting All weather protection - 2 -

5 Umbrella Models Models Model C30 (CS32) Umbrella shape Square Umbrella size 3180 x 3180 Overall height 3350 Under canopy clearance 2300 Model C36 (CS38) Umbrella shape Square Umbrella size 3725 x 3725 Overall height 3350 Under canopy clearance 2300 Model ATS (CTS43) Umbrella shape Truncated square Umbrella size 4295 x 4295 Overall height 3360 Under canopy clearance 2300 Model AS (CS45) Umbrella shape Square Umbrella size 4580 x 4580 Overall height 3420 Under canopy clearance 2250 Model ALS (CS50) Umbrella shape Square Umbrella size 5055 x 5055 Overall height 3660 Under canopy clearance 2400 Model CR45 (45/32) Umbrella shape Rectangular Umbrella size 4550 x 3180 Overall height 3360 Under canopy clearance 2150 Model CR53 (53/38) Umbrella shape Rectangular Umbrella size 5300 x 3755 Overall height 3455 Under canopy clearance

6 Umbrella Colours Umbrella Colours Canopy Colours Steel Frame Colours - 4 -

7 Heating & Cooling for Umbrellas Heating Celmec provide two heating options for the Umbrellas; ERH Panel heaters and IRH-E heaters Surround heat: ERH panels are positioned on the umbrellas in such a way as to create evenly distributed surround heating under the umbrella. Additionally, IRH-E heaters are optional for high intensity heating applications. Safety Rating: The HeatRay Umbrella system is IPX5 rated against water penetration, allowing the umbrella and heaters to be safely washed and rinsed with a water hose. Closing The Umbella: With a patented lever action system C30, C36 and ATS umbrellas are fully collapsible even with ERH panels and lights attached. Hub Loom The Umbrella Hub Loom is the central wiring termination point for the integral lighting and heating system. The Hub Loom consists of the following main components; Sealed Junction Boxes: (one or more, depending on umbrella type). The enclosures are weather proof, complete with cable entry glands to maintain a performance rating of IP65. Hub Tray: Designed to house and conceal the Junction Boxes and associated wiring and main power cables. Control: A Control Module allows heaters to be controlled for ON/OFF, and in the case of ERH heaters, HIGH/LOW operation. Cooling The Celmist evaporative mist cooling system is integrated around the hub of the umbrella, with a purpose designed misting ring. Celmist is an evaporative cooling system which reduces the temperature of the surrounding air by an average of 9 K (9 C / 16 F). Sensor controlled humidity: A Humidity Sensor located within the umbrella space automatically adjusts the system to ensure the most comfortable temperature for patrons. Intermittent or continuous operation: A programmable solid state Controller with Auto / Manual operation modes enables the system to operate in intermittent humidity control mode or continuous operation in manual mode. Overload protection: In built protection against thermal overload & interruption to water supply. Cooling Coverage: Celmist systems are modular in design with one pump serving a number of umbrellas, catering for small to large installations. The number of systems required depends on the installation and the size of the area. Materials: Purpose-designed umbrella Misting Rings and small bore high pressure Flexible Tubing (120bar)

8 Lighting Lighting for Architectural Umbrellas Two lighting systems are available on the Umbrellas, the Celight standard system and an LED lighting system. In both cases, the lighting is set on the arms of the umbrella so that the light reflects off the umbrella canopy rather than shining directly onto people below. Celight Specifications Fluorescent G23 type globe / 2750 o K Curve shaped light fixture complete with pearl carbonate diffuser L 500mm, W 60mm, D 50mm Range wide diffusion Span 120 degrees, forward bias Power 11W / 0.1 Amp 240 V / 1Ph / 50Hz LED Celight Specifications Colours: White Yellow Blue Green Purple Red Pink Control Continuous colour change or individual colour selection Timer available to set colour changeovers Dimmable - 6 -

9 Weather Accessories Weather Protection Accessories The Weather Protection Accessory range allows HeatRay Umbrellas to be linked together, provides protection from rain and wind and allows for extra strengthening of the structures. Weather protection is an essential part of the heating & cooling design for HeatRay umbrella structures. Accessories include: Umbrella frames Linking gutters Roof infills Perimeter gutters Transparent Side cover Wind columns for extra strength - 7 -

10 Weather Protection - C30 (CS32) G (Gutter by the metre) G30 (Link Gutter) F30 (Frame) L30 (Side cover infill) D (Door) 8 (Side cover - full width) 8A (Side cover - 3/4 section) 8B (Side cover - 1/3 section) R4 (Roof Infill) - 8 -

11 Weather Protection - C36 (CS38) G (Gutter by the metre) G36 (Link Gutter) F36 (Frame) L36 (Side cover infill) D (Door) 9 (Side cover - full width) 9A (Side cover - 3/4 section) 9B (Side cover - 1/3 section) R5 (Roof Infill) - 9 -

12 Weather Protection - ATS (CTS43) G (Gutter by the metre) GA (Link Gutter) FA (Frame) LA (Side cover infill) DA (Door) 2 (Side cover - link section) 3 (Side cover - middle umbrella section) 3A (Side cover - 1/3 section) 4 (Side cover - 3/4 section) 5 (Side cover - full width) 6 (Side cover - octagonal section) R1 (Roof Infill - middle umbrella section) R2 (Roof Infill - octagonal corner) R3 (Roof Infill - square corner)

13 Weather Protection - AS (CS45) G (Gutter by the metre) GAS (Link Gutter) FAS (Frame) LAS (Side cover infill) DAS (Door) 10 (Side cover - full width) 10A (Side cover - 3/4 section) 10B (Side cover - 1/2 section) R6 (Roof Infill)

14 Weather Protection - ALS (CS50) G (Gutter by the metre) GALS (Link Gutter) FALS (Frame) LALS (Side cover infill) DALS (Door) 11 (Side cover - full width) 11A (Side cover - 3/4 section) 11B (Side cover - 1/2 section) R7 (Roof Infill)

15 Weather Protection - CR45 (45/32) G (Gutter by the metre) G45L/45S (Link Gutter) F45L/45S (Frame) LR45 (Side cover infill) DR45 (Door) 8 (Side cover - full width short side) 12 (Side cover - full width long side) 12A (Side cover - 3/4 section long side) 12B (Side cover - 1/2 section long side) R45-1 (Roof Infill short side) R45-2 (Roof Infill long side)

16 Weather Protection - CR53 (53/38) G (Gutter by the metre) G53L/53S (Link Gutter) F53L/53S (Frame) LR53 (Side cover infill) DR53 (Door) 9 (Side cover - full width short side) 13 (Side cover - full width long side) 13A (Side cover - 3/4 section long side) 13B (Side cover - 1/2 section long side) R53-1 (Roof Infill short side) R53-2 (Roof Infill long side)

17 Maintenance Umbrella membranes, fittings, heaters and lights should be cleaned regularly in order to maintain good appearance, high efficiency and long life. They should be cleaned as often as a window in the same area would be cleaned. This may be as frequently as weekly in areas close to the sea. Heaters & Lights Firstly rinse the heaters and lights to remove any build up of dust, insects, pollutants and salt deposits. If these are not removed, the build up will act as an abrasive and may damage the protective outer layers of the components causing surface stains. In the case of ERH - gently clean the heaters and lights using a soft cloth or sponge, warm water and mild detergent (do NOT scrub the black face of ERH heaters). Do not sponge the units before rinsing off any build up caused by the environment. Rinse off after cleaning using a soft spray setting, from approx. 0.5m away and avoid pointing directly into heater ends and turn the Heating System on after final rinsing to dry and eliminate possibility of steam formation at a later date. Check local requirements regarding the use of water and/or cleaning agents in outdoor areas. You may need to rinse with a water saving high pressure unit if water restrictions apply. Grey water may be a requirement. In between cleaning periods, water rinsing is recommended to clean off any build up of grime. Side Covers & Weather Accessories All transparent fabric covers and accessories should be treated no differently to that of a glass window. These accessories should be cleaned on a regular basis in order to maintain their clarity. Spray or sponge cold or lukewarm water with a light concentration of car wash and wax detergent on the clear fabric. Wash using a sponge or soft cloth then rinse off with low pressure clean water to remove dirt and detergent. Under NO circumstances are abrasive cleaners, scrubbing brushes, bleach or high pressure water blast to be used on clear fabric. NOTE: The wax properties of the car wash provide a protective shield against pollutants and salty air. If not maintained regularly, the transparent covers will blemish and become permanently stained, losing their translucent appeal. Clear out all external and link gutters of dead leaves and foreign objects, using a brush and hose to clean. Ensure all drains if any are free from blockage. IF CLOSE TO THE SEA OR A POLLUTED ENVIRONMENT, RINSE THE HEATRAY UMBRELLAS, SIDE COVERS, ERH HEATERS AND LIGHTS ON A MORE REGULAR BASIS (AT LEAST WEEKLY) TO PREVENT CORROSIVE SALT AND DAMAGING GRIME BUILD UP