OriGiNAl BEDiENuNGSANlEiTuNG K-fee 21 lesen Sie zuerst die Anleitung, bevor Sie dieses Gerät verwenden.

Transcription

1 DE FR ES IT PL SK CZ NL RUS OriGiNAl BEDiENuNGSANlEiTuNG K-fee 21 lesen Sie zuerst die Anleitung, bevor Sie dieses Gerät verwenden. OriGiNAl OpErATiNG instructions K-fee 21 please read the instructions before using this device. MANuEl D utilisation D OriGiNE K-fee 21 Veuillez d abord lire les instructions, avant d utiliser cet appareil. instrucciones DE uso OriGiNAlES K-fee 21 lea estas instrucciones antes de utilizar el aparato. istruzioni per l uso OriGiNAli K-fee 21 Si prega di leggere le istruzioni prima di utilizzare il dispositivo. OryGiNAlNA instrukcja OBSłuGi K-fee 21 przed rozpoczęciem korzystania z urządzenia należy przeczytać instrukcję. OriGiNálNy NáVOD NA použitie K-fee 21 Pred používaním prístroja si najprv prečítajte návod. OriGiNál NáVOD K OBluzE K-fee 21 Před použitím tohoto přístroje si nejprve přečtěte návod k obsluze. OriGiNElE GEBruiKSAANwijziNG K-fee 21 lees eerst de gebruiksaanwijzing voordat u dit apparaat gebruikt. ОригинальнОе руководство пользователя K-fee 21 прежде чем пользоваться аппаратом, ознакомьтесь с данным руководством. TEEKANNE GMBH & CO. KG D-02 DüSSElDOrf GErMANy Nr.: Bedienungsanleitung_Titel Umschlag.indd :17

2 Deutsch...2 English... Français... Español...98 Italiano...10 Polski...12 Slovenský...19 Čeština...22 Nederlands...28 Pусский Safety.information...-9 Device.overview...0 Overview.of.the.buttons.and.symbols...1 Starting.up.the.device...2 Preparing.beverages.(ex..black.tea)... Preparing.tea..Explanation.of.brewing.cycles... Programming.cup.quantities... Daily.Cleaning...-7 Resetting.the.capsule.counter.when.prompted,.or.as.needed...8 Cleaning.when.prompted Descaling.when.prompted...2- Changing.the.filter.when.prompted...- Cleaning,.descaling.and.changing.the.filter,.as.needed... Set.parameters:.Water.hardness...7.Water.filter...8.Automatic.switch-off...9.Cleaning.interval...0 Evaporation.of.the.device...1 Frequently.asked.questions...2 Specifications.and.service... Notes.on.disposal... SPRAChENvERzEIChNIS. LANguAgE.DIRECtORy. RéPERtOIRE.DES.LANguES ÍNDICE.DE.IDIOmAS ELENCO.DELLE.LINguE zestawienie.języków zoznam.jazykov Jazykový adresář talenlijst СПИСОК.ЯЗЫКОВ INDEx FR ES IT PL SK CZ NL RUS DE Bedienungsanleitung_.indd :9

3 Symbols and warnings The warning triangle is used in the instructions, in the places where disregarding the safety instructions can create risks for the user or the device. Warning: Electric shock Warning: Risk of scalding Prohibited: Do not reach inside Prohibited: Do not drink Requirement: Read instructions General information Recommendations General safety instructions Disregarding the safety instructions for the device can be hazardous. Please keep the instruction manual on hand, with the device. This device is used for making hot drinks, according to this manual. The manufacturer assumes no liability for the consequences of improper use, or non-compliance with the instruction manual. Do not use the device if it is not functioning properly, or if there are signs of damage. In this instance, pull the power cord and contact your service centre (Your service centre contact information can be found on page ). Commercial use This device is intended for use by professionals or trained personnel in businesses and in related fields, such as Hotels, motels and other accommodations, ices, conference rooms, sports facilities, waiting rooms and reception areas. This device may only be operated by trained users. This device may only be installed in places where it can be overseen by trained personnel. Household use This device is intended for household use and in related fields, such as in kitchens for shop employees, offices and in other working environments, for guests in hotels, motels and other accommodations with breakfasts. Special safety instructions Do not leave the device unattended during operation. This device can be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they are supervised or have been instructed in the safe use of the device and have understood the resulting risks. Cleaning and maintenance may not be performed by children, unless they are 8 years or older and are supervised. Keep the device and its connecting cable away from children younger that 8 years old. Children may not play with the device. This device is solely intended for use in enclosed spaces. For longer periods of disuse, holidays, etc., empty the device, clean and unplug the power cord. Read the chapter "Cleaning, descaling and changing the filter, as needed" (Page ). Do not damage the power cord with hot or sharp contact, letting it hang down (tripping hazard) or by touching it with wet hands. Never lift the device by the lever. Never forcefully open or close the lever risk of breaking! Don't use the device without drip trays, drip grids and capsule collection containers. For health reasons, fill the water tank with fresh, cold drinking water. Do not overfill the water tank. Only use the beverage capsules intended for this device, which are marked with the K-fee System Logo. Never use a damaged or deformed capsule. Before drink preparation, always check that there are no used capsules in the brewing chamber, and that the new capsule is in the correct position after being loaded. Positioning the device Always place the machine on a stable, level and water-resistant surface. Do not place the unit on the power cord. Do not place the device on a hot surface (ex. a hob) or near any heat sources or fire. Do not place the device in any areas, where a water jet is used for cleaning. Electrical safety Do not continue to use the device, if the cord or plug is damaged. Contact your Service Centre (your service centre contact information is on page ). Keep cord out of the reach of children. Make sure that the size shown on the name plate matches the rated voltage of your power supply. For more details on your device, see also "Technical data and service" on page. Only connect the device to a socket with a protective ground. A flawed connection can terminate your warranty rights. 7 Bedienungsanleitung_.indd :9

4 Avoid the danger of an electric shock The live parts are inside of the device. Therefore, do not open the enclosure, under any circumstances. Opening the cabinet is permitted only by trained service personnel. Protect the device against moisture and splashes. Do not pour any liquid over the unit. Do not pull the plug from the socket, by the cable. Avoid the risk of heat or cold Risk of burning when dispensing. When completing a process and then opening the lever, do not keep your finger not under the spout risk of scalding, due to dripping residual liquid! After completing the brewing process, slowly open the lever to eject the capsule, and do not bend past the capsule opening (risk of splashing hot liquid!). Be careful when emptying the drip tray the water can be very hot. During operation, do not remove the lower drip tray risk of scalding! Never open the lever on the machine during the brewing, rinsing, cleaning or descaling. When completing a process and then opening the lever, do not keep your finger not under the spout risk of scalding, due to dripping residual liquid! Do not stick fingers into the capsule insertion opening. Protect the appliance from frost. Only operate the unit within the appropriate temperature range (10 - C). Evaporate the unit, if it is to be transported or stored at freezing temperatures (temperatures below 0 C) (see "evaporation of the device" on page 1). Caution, risk of scalding! The steam can reach up to 120 C. Hygiene and Cleaning Only use capsules that are within the expiration date. Store the capsules in an appropriate location. For hygienic reasons, flush the device x before the first use and 1x after each beverage preparation. Refer to the "Daily cleaning" instructions on page. Before cleaning the unit with a damp cloth, disconnect the power cord and let the device cool down. Do not clean the device under running water or with a water jet. Clean the device regularly and consider the information in the manual, to avoid hygiene risks. Only use cleaning and descaling materials and water filters that are suitable for the device. More information about the products and/or authorized dealers can be found on our website. Health risk! Read through the instructions for using the cleaning and descaling materials, as well as the water filter, and follow the safety instructions. Service and Repair The manufacturer declines all responsibility for internal or external modifications to the device. Never open the device to make modifications. Apart from the normal use, all other activities, such as repairs and the replacement of the power cord, may only be performed by an authorized service centre. If the device, cable or plug is damaged, you may no longer use the machine. Contact your Service Centre (your service centre contact information is on page ). Capsules to be used! Only use original K-fee System capsules! Look for the red K-fee System logo and the characteristic grooved capsule shape. The use of non-original capsules has the following risks: 1. Health risks Because of differences in the brewing process and capsule structure, hot water and steam can escape under high pressure, with the use of non-original capsules risk of scalding! 2. Damaging the device and the guarantee With the use of non-original capsules, damage to the unit and changes in the brewing process and capsule structure may occur and the warranty may be voided. The manufacturer and his distributors can by no means be held liable for any injury or damage to property, which occurs directly or as a result of non-original capsules being used with this unit. This manual is also available for download on our website: Bedienungsanleitung_.indd :9

5 DEvICE.OvERvIEW 1 Bobber 2 Lower drip tray Drip tray wall Adjustable dispenser Capsule insertion opening Lever 7 Water tank 8 Water tank cover 9 Water filter 10 Display 11 Control buttons 12 Capsule container 1 Drip grid 1 Upper drip tray Risk of injury! Four sharp needles open the capsule on the device. To avoid injury, do not reach into the capsule insertion opening. Remove the protective film from the drip tray (1) before the first use. The package includes all of the parts of the tea machine shown here, a water filter and two cleaning capsules and this manual. Please check that the package is complete before using the equipment Button Description Capsule. Button Description Capsules Symbols Black Tea Green Tea Fruit/Herbal Tea Chai Latte Rinse button On/ button Description All beverage symbols blink after turning on, as long as the device is heating up. All beverage symbols light up when the device is heated up and ready for use. When a beverage is prepared, the associated beverage symbol flashes. The respective beverage symbol blinks quickly when a filling quantity is programmed. This symbol lights up when a rinsing is necessary or hot water is possible. This symbol blinks during the rinsing process or for hot water This symbol lights up when the device needs to be cleaned (according to the pre-set cleaning interval). The symbol lights up until the cleaning is executed. This symbol lights up when the device needs to be descaled. The symbol lights up until the descaling is executed. This symbol lights up when the capsule container needs to be emptied (after 29 capsules are used). The symbol lights up until the capsule counter is reset. This symbol lights up when the water tank is empty. The water tank holds about, litres of water. This symbol lights up when the water filter needs to be changed (after 0 litres of water). The symbol lights up until the filter is changed. OvERvIEW.OF.thE.. buttons.and.symbols The colour of the beverage buttons and symbols are matched to the respective capsules. Symbol arrangement on the display Defaults: Black tea... approx. 210 ml Green tea... approx. 210 ml Fruit/Herbal tea... approx. 210 ml Chai Latte approx. 10 ml per capsule Cleaning, descaling and filter symbols light up until the appropriate actions are executed. 0 1 Bedienungsanleitung_.indd :9

6 SEttINg.uP.thE. DEvICE 11 1 A b PREPARINg.DRINkS. (Ex..bLACk.tEA) Please read the safety information before operating. If you decide to use the water filter: screw in the filter only after the water tank starts up and the device has been rinsed, once again, with at least 200 ml of water. Activate the set-up of "Water filter on" Refer to the instructions in "Setting the parameters: water filter" (see page 8). First, check the voltage on the nameplate (see underside of machine). Remove the water tank. max...l Fill the water tank with fresh water. Adjust the drip tray to the desired cup size. 2 max. 110.mm With the upper drip tray. max. 10.mm With the lower drip tray. Risk of injury! Do not reach into the capsule insertion opening. The device will automatically operate according to the default, when it is not used. If necessary, turn on and clean the device again, before beverage preparation, with the on/off button (see page 2). Important: only insert the capsule after rinsing takes place. If the device was exposed to freezing temperatures, please wait at least hours before turning on, so that the device can, once again, warm up to room temperature. A frozen or very cold device may not function correctly. Re-insert the water tank. On Briefly press the on/off button. Device heats up. Close lever completely. Situate container. If present, remove the bottom flap of the capsule. Open lever and insert capsule. Adjust height of the spout. Close lever and press beverage button. Brewing process runs, with different brewing cycles, depending on the button pressed. The spout can be shifted up or down with a pushing device (both sides of the spout). Very hot beverage. Do not open the lever during the brewing process. Do not reach under the spout. Rinse the device x before the first use. Press the rinse button again, after the completion of the rinsing process By repeatedly pressing any button, the brewing process can be stopped. For hygienic reasons, rinse the device once after every beverage preparation. 2 Very hot water. Press rinsing button, rinsing runs. Wait for the end of the rinsing process. Then, empty the container. Device is ready. Beverage preparation concludes. Open lever, capsule falls into capsule container. To shut off, briefly press the on/off button. Bedienungsanleitung_.indd :9

7 tea.preparation.-. ExPLANAtION.OF. brewing.cycles Black Tea PROgRAm CuP.quANtItIES There are different brewing cycles for optimal preparation, depending on the type of tea. Capsule is filled with hot water Brewing pause: 20 s let steep Tea is ready to brew Button Factory settings [ml] Setting range [ml] Green Tea Capsule is filled with hot water Brewing pause: 2 s let steep Tea is ready to brew Device is ready. Place desired cup under the spout. Open lever and insert desired capsule (ex. black tea). Close lever completely. 10 (per capsule) (not programmable) Fruit/Herbal Tea Always insert a new capsule in the device before programming. Chai Latte is prepared with 2 capsules, without the brewing pause. Chai Latte 1. Interval 2. Interval Tea is ready to brew Brewing pause: s let steep Brewing pause: s let steep 1. Milk / Latte 2. Tea / Chai Hold down the beverage button for the inserted capsule (ex. black tea) for at least sec. at.least.sec. The corresponding symbol will start quickly blinking on the display. After that, release the button and the machine will continue to brew. Press the same button again, when the desired cup volume has been reached. The machine stops the brewing process and saves the new cup volume. Newly programmed volumes remain saved (even after a power failure). It is also possible to reset the cup volumes to the factory settings. Refer to the Frequently Asked Questions on page 2. Open lever, capsule falls into capsule container. Bedienungsanleitung_.indd :9

8 DAILy.CLEANINg.(1) DAILy.CLEANINg.(2) For hygienic reason, we recommend rinsing the device: x before the first beverage preparation, 1x after each beverage preparation. Risk of damage! Before removing the drip trays, it must be ensured that the spout is in the uppermost position. Very hot water. Place container under spout. Open and close lever. Briefly press button, device rinses once. Drain container and open lever. Move spout to uppermost position. Remove drip trays, capsule container and water tank. Take apart drip trays. Resetting the capsule counter is described in detail on page 8. Risk of burns! Let the device cool down before removing the nozzle. at.least..sec max...l Risk of damage! Only use a damp cloth and a mild detergent if necessary (do not use abrasive or aggressive cleaning agents). Do not put any parts of the device in the dishwasher. Reset capsule counter: Press on/off button for at least seconds. To shut off, briefly press the on/off button once again. Loosen nozzle with a quarter turn. Empty all containers. Clean all parts. Fill the water tank with fresh water Remove nozzle. Clean nozzle thoroughly under warm water. Replace nozzle again and secure it with a quarter turn. Insert drip trays, capsule container and water tank back into the device. Wipe clean device with a slightly damp cloth. 7 Bedienungsanleitung_.indd :9

9 RESEt.CAPSuLE.. COuNtER.WhEN PROmPtED 1 2 CLEANINg.WhEN. PROmPtED.(1) Once 29 used capsules are in the capsule container, a warning symbol lights up. After descaling, cleaning or changing the filter, the capsule counter is reset automatically. Only.use.cleaning.capsules.that.are. suitable.for.the.device..for.more. information,.please.visit.our.website. at:. Health risk! Read the instructions for the cleaning capsule carefully and follow the safety instructions. Risk of damage! Before removing the drip trays, it must be ensured that the spout is in the uppermost position. Device indicates a full capsule container. Open lever. Remove drip trays and capsule container. Empty all containers. After using milk-based beverage capsules (Chai Latte), a daily cleaning with the cleaning capsule is recommended. Devices shows cleaning prompts on the display. After using milk-based beverage capsules (Chai Latte), a daily cleaning with the cleaning capsule is recommended. If the cleaning is cancelled by pressing the on/off button, the device will automatically return to cleaning mode the next time it is turned on. at.least...sec. Reinsert drip trays and capsule container. Keep the on/off button pressed for at least seconds to reset capsule counter. The container symbol will blink briefly. After that, the device is ready for use again. To shut off, briefly press the on/off button. Press the on/off and rinsing button together. Remove the water tank. RESEt.CAPSuLE.. COuNtER.WhEN. PROmPtED In order to avoid a display error, always reset the capsule counter as soon as the capsule counter is emptied (ex. for the daily cleaning) at.least 0..l The water filter (optional) can remain in the water tank. at.least...sec. 8 Device is ready. Keep the on/off button pressed at least seconds to reset capsule counter. The container symbol will blink briefly. After that, the device is ready for use again. Clean water tank and fill it with fresh water (at least 0. litres). Replace the water tank. Place a container under the spout. Open lever, insert cleaning capsule and close lever again. 9 Bedienungsanleitung_.indd :0

10 CLEANINg.WhEN. PROmPtED.(2) min CLEANINg.WhEN. PROmPtED.() Very hot cleaning fluid. max...l To finish the cleaning process, the water tank must be removed and reinserted. Subsequently the device will switch off automatically. Press rinse button. Cleaning capsule is filled with hot water. 2 min. pause for the exposure of the cleaning fluid. Remove and empty container. Remove water tank. If needed, fill the tank with fresh water. Insert water tank into the device. The blue-green water is characteristic of the current cleaning process Risk of damage! Before removing the drip trays, it must be ensured that the spout is in the uppermost position. Cleaning process continues. Wait until rinse symbol flashes. Open lever, eject cleaning capsule and close lever again. Move spout to uppermost position. Remove drip trays and capsule container. Take apart drip trays. Health risk! Do not drink cleaning fluid Very hot water. 0 The device rinses with 200 ml of water. Very hot water. Empty the container and replace it back under the spout. Press rinse button. Wait until the rinsing process is complete. Empty all containers..x Clean all parts. Place drip trays and capsule container back into the device. Wipe clean device with a slightly damp cloth. Risk of damage! Only use a damp cloth and a mild detergent if necessary (do not use abrasive or aggressive cleaning agents). Do not put any parts of the device in the dishwasher. 1 Bedienungsanleitung_.indd :0

11 DESCALINg WhEN.PROmPtED.(1) DESCALINg WhEN.PROmPtED.(2) Health risk! Read the instructions for descaling carefully and follow the safety instructions. Only. use. descaler. that. is. suitable. for. the. device.. For. more. information,. please. visit. our.website.at:. Very hot water. Health risk! Do not drink descaling fluid. If descaling is cancelled by pressing the on/off button, the device will automatically return to descaling mode the next time it is turned on. The device automatically prompts for descaling. It takes into account the set water hardness and whether a water filter is used. Devices shows descaling prompts on the display. Re-insert the water tank. Place a container under the spout. 12 Press rinse button. 1 Wait until the rinsing process is complete. Then, empty the container. 1 The machine rinses, in intervals until the water tank is empty. Risk of damage! Before removing the drip trays, it must be ensured that the spout is in the uppermost position. Risk of damage! Before removing the drip trays, it must be ensured that the spout is in the uppermost position. To shut off, briefly press the on/off button. Press the on/off and rinsing button together. Remove drip trays with capsule container. Clean water tank, fill (at least 0. litres) and re-insert it into the device. Remove drip trays. Empty drip trays, clean and replace with capsule container. The water filter must be removed before descaling l Very hot water. Rinse the device with 20 ml of water. To finish the descaling process, the water tank must be removed and reinserted. 2 Empty container and reinsert in machine. Remove and empty the water tank. Fill water tank with descaling agent (100 ml) and 0, litres of water. Place a container under the spout. Press rinse button. Wait until the rinsing process is complete. Then, empty the container. Remove the water tank, fill up and replace. The descaling symbol disappears. Bedienungsanleitung_.indd :0

12 ChANgE.FILtER WhEN.PROmPtED.(1) ChANgE.FILtER WhEN.PROmPtED.(2) Health risk! Read the operating and safety instructions for the water filter thoroughly. For hygienic reasons, we advise you to replace the water filter at least every months. Only. use. a. water. filter. that. is. suitable.for.the.device..for.more.information,.please.visit.our.website.at:. max...l The filter symbol lights up as red until the water filter is changed. With the previously activated option "Water filter on", the device automatically prompts you to change the water filter, after a water consumption of 0 litres. Devices shows filter change prompts on the display. Dispose of the used water filter. Screw in new water filter. Completely fill the reservoir and insert it into the device Risk of damage! Before removing the drip trays, it must be ensured that the spout is in the uppermost position. Very hot water. Rinse the device with 200 ml of water. To shut off, briefly press the on/off button. Press the on/off and rinsing button together. Remove drip trays with capsule container. Place a container under the spout. Press rinse button. Wait until the rinsing process is complete. Then, empty the container. If filter change is cancelled by pressing the on/off button, the device will automatically return to filter change mode the next time it is turned on With the first use of a water filter, set the corresponding parameter to "on". Refer to the instructions in "Setting the parameters: water filter" on page 8. The setting is retained even after a power failure. Empty all containers and replace. Remove and empty the water tank. Unscrew the used water filter. The water filter symbol goes out. The device then switches off automatically. Bedienungsanleitung_.indd :0

13 CLEANINg,.DESCALINg AND.ChANgINg.FILtER AS.REquIRED With this function, descaling or cleaning can be started at your own discretion or a filter replacement can be carried out. SEt.PARAmEtERS: WAtER.hARDNESS Water hardness soft medium Display symbols Switch off the device first. Press the on/off and rinsing button together. Descaling symbol lights up on the display. Descaling: see steps on page 2 from image. Switch off the device first. Press the black tea button and on/off button at the same time. Current water hardness is displayed (see table). hard The set water hardness and the water filter determine the amount of water used for descaling: This display can be exited by pressing the On/ button, without starting a function. Briefly press rinse button repeatedly, if necessary, until the desired symbol lights up. at.least..sec. Keep rinse button pressed for at least seconds, to start the selected function. Cleaning: see steps on page 9 from image. Filter change: see steps on page from image. The filter symbol only appears, if the parameter "water filter - on" was previously set. Briefly press black tea button repeatedly until the desired water hardness appears. at.least..sec. To save, press the black tea button for at least seconds. To confirm, all beverage symbols will blink once. Water hardness Water Consumption [l] with/without water filter soft medium hard 0 00 Factory setting: hard Water.hardness.overview Hardness range EN Water hardness in mmol DE Water hardness in German degrees of hardness ( d) 1 soft < 1. < 7 2 medium hard To cancel the setting, press the on/off button. Ask your water company for more detailed information about your water hardness. The water hardness entered in the device determines the necessary descaling frequency for optimal operation. 7 Bedienungsanleitung_.indd :0

14 SEt.PARAmEtERS: WAtER.FILtER. SEt.PARAmEtERS: AutOmAtIC.SWItCh-OFF Water filter Display symbol For more information about the automatic switch-off, see page. On Switch-off time Display symbol Factory setting: No water filter present. Switch off the device first. Press "Fruit/Herbal tea" button and on/off button together. The current setting is shown on the display (see table). Switch off the device first. Press the green tea button and on/off button at the same time. Current switch-off appears on the display (see table). 9 Min. 0 Min. To cancel the setting, press the on/off button. 0 Min. 20 Min. 80 Min. Factory setting: 0 Min. at.least..sec. at.least..sec. Press the "Fruit/Herbal tea" again briefly to change the setting. To save, press the "Fruit/ Herbal Tea" button for at least seconds. To confirm, all beverage symbols will blink once. Briefly press green tea button repeatedly until the desired sleep time appears. To save, press the green tea button for at least seconds. To confirm, all beverage symbols will blink once. To cancel the setting, press the on/off button. 8 9 Bedienungsanleitung_.indd :0

15 SEt.PARAmEtERS: CLEANINg.INtERvAL 20. C EvAPORAtINg.thE DEvICE The cleaning interval determined by how much the used capsules cleaning symbol lights up on the display. Capsules used Display symbol at.least..sec. With this function, the remaining water in the device is evaporated and removed. This prevents residual water leak or stops the device from possible freezing Factory setting: 100. With the setting "off" the cleaning request is turned off. For hygienic reason, we recommend that you keep the factory setting. To cancel the setting, press the on/off button. Switch off the device first. Briefly press "Chai Latte" button repeatedly until the desired cleaning interval appears. Press "Chai Latte" button and on/off button together. at.least..sec. To save, press the "Chai Latte" button for at least seconds. Current cleaning interval is displayed (see table). To confirm, all beverage symbols will blink once. If necessary, let device warm up to room temperature. Remove and empty the water tank. 7 Device must be turned off: Briefly press the on/off button. Evaporation begins. 8 Press Black Tea button and Chai Latte button at the same time for at least seconds. Wait until evaporation is complete and the unit shuts down. Risk of scalding The steam may reach a temperature of up to 120 C. Do not reach under the spout. Keep a sufficient distance from the spout. The evaporation takes a maximum of 2 minutes. Re-insert the empty water tank. Wipe the front side of the device dry with a cloth. 0 1 Bedienungsanleitung_.indd :0

16 FREquENtLy.ASkED questions All these symbols are blinking quickly? Switch off the unit, unplug the mains plug and allow to cool to room temperature. After that insert the mains plug and switch on again. If error occurs again, contact Service Centre. P V ~, 0 Hz, max. 1 W 1 m max. 19 bar technical.data. AND.SERvICE Caution! The device is designed for beverage capsules of all those brands that are marked with the K-fee System Logo. The use of non-original capsules may involve the following risks: Health hazards, damage to the device and the possible loss of warranty claims. All these symbols are blinking quickly? Switch off the device and unplug it. Wait at least 1 minute, Then insert the the mains plug and switch on again. If error occurs again, contact Service Centre. Beverage output is not working properly? Lever fully down. If necessary, device descaling see section "cleaning, descaling and changing the filter as required". Beverage discharge occurs with delay? Device heats after. Capsule container is crowded and jammed? By gently shaking, try to remove the capsule container. After inserting a capsule, the lever can not be closed completely? Make sure that there isn't an already used capsule in the brewing chamber, the capsule is not crowded and the newly inserted capsule is in the correct position. Beverage is not hot enough? If necessary, device descaling see section "cleaning, descaling and changing the filter as required". All of the beverage symbols won't stop blinking slowly? In such a case, turn off the device and let it cool down before it is put back into service. A B C approx.. l approx.. kg A = 200 mm B = 0 mm C = 1 mm max. 10 mm 10 C C ~ 9 C Noise less than 70 db (A) If you have any questions and suggestions, please contact us through Reset device to factory settings? Switch off the device and unplug it. Hold rinse button and black tea buttons simultaneously. Insert the power cord and release both buttons. To confirm, the beverage symbols briefly light up on the display twice. What is the Eco Mode? The device switches off automatically and returns to the eco mode when it is not used within 0 minutes (factory setting). In Eco Mode, the device consumes significantly less power (less than 0. W) compared to an operational, heated state. Information for automatic switch-off The device switches off automatically and returns to the eco mode when it is not used within 0 minutes (factory setting). For the environment, we recommend that you keep the factory setting. In Eco Mode, the device consumes significantly less power (less than 0. W) compared to an operational, heated state. If you still want to change these parameters, please observe the instructions in the chapter "Setting the parameters: automatic switch-off". 2 Bedienungsanleitung_.indd :1

17 NOtES.ON.DISPOSAL The packaging is recyclable. Ask the competent authority/recycling centre in your area for more information about recycling. Protecting the environment takes precedence! The device contains valuable materials which can be recycled and reused. Therefore, dispose of the device, at a public recycling centre in your area. The unit is provided with a marking, in accordance with the European Directive 2002/9 / EC (WEEE) for electrical and electronic equipment. This Directive regulates the return and recycling of waste equipment within the EU. Bedienungsanleitung_.indd :1