Capri B Cast iron combination oil-fired boiler with water tank

Transcription

1 C Cast iron combination oil-fired boiler with water tank Life-enhancing heat GB

2 Cast iron combination oil-fired boiler with water tank RELIABILITY SAFETY EASY OPERATION EASE OF MAINTENANCE

3 Life-enhancing heat is the new oil-fired, combination, floor-standing, system boiler (central heating + production of domestic hot water and water tank), entirely designed and manufactured by Fondital. The range includes 12 models, with heat outputs from 24 to 43 kw, available with open chamber (BTF) and sealed chamber (BTFD), both can be supplied with double flow connection for systems with low and high temperature zone (versions V: BTFV, BTFDV). The heat exchanger is made of cast iron (EN-GJL-200) with three smoke passes, the design of the combustion chamber allows the flame to fully develop and to spread on an ample surface of exchange, thus absorbing superior quantities of heat while allocating a low thermal load on walls. A high-thickness insulation completely covers the boiler body, avoiding wasteful and detrimental heat dispersions toward the outside. The casing is made of electro-galvanic finished sheet panels, painted with epoxy-polyester powders for the longest lifetime. The domestic hot water supply is obtained by means of a 130-lt., glass enameled water tank, equipped with high efficiency coil exchanger, magnesium anode and insulated with a thick layer of expanded polyurethane. The water tank interior can be inspected. The efficiency rating for all models, according to 92/42/ EC, is two stars. V models only The control panel includes a printed circuit board and master switch with light, operating mode selector, domestic hot water and central heating temperature adjusting selectors, water pressure gauge, led thermometer which acts as diagnostic indicator as well, overheating reset button. The control panel can also host a digital, two channel programmer, managing heating unit, which is supplied as standard with V models, or an electromechanical programmer optionally supplied for all other models. The heating unit can be connected to a thermostat and it can also operate in sliding temperature mode by connecting an external probe, supplied upon request (code: 0SONDAES01). A remote control can be connected to the heating unit (optional equipment), which together with an external probe (code: 0KSONEST00) allows for improved management of the heating unit. In order to manage a multiple zone central heating system, a suitable kit is available as an accessory which is capable of managing three heating zones and, when coupled by an external probe (standard with the kit) allows for sliding temperature operation mode; the probe is to be connected to the printed circuit board of the heating unit. The remote control is also designed for three central heating zone system management. The available combinations of different zone management printed circuit board, remote control and external probe are listed below. MODEL ZONE MANAGEMENT PCB REMOTE CONTROL EXTERNAL PROBE NOTES CAPRI B NO NO 0SONDAES01 To be connected to the heating unit printed circuit board. CAPRI B NO YES 0KSONEST00 To be connected to the remote control CAPRI B YES NO 0SONDAES01 To be connected to the heating unit printed circuit board. CAPRI B YES YES 0SONDAES01 To be connected to the heating unit printed circuit board. CAPRI BV YES* NO 0SONDAES01* To be connected to the heating unit printed circuit board. CAPRI BV YES* YES 0SONDAES01* To be connected to the heating unit printed circuit board. * supplied as standard

4 Cast iron combination oil-fired boiler with water tank DIMENSIONS TFD VERSION M1 D M2 40 R1 R M 144 R C S F Model M R M1 R1 M2 R2 C F S D FLUE GAS DISCHARGE mm COMBUSTION AIR INTAKE mm BTF/BTFV 23 G 1 G 1 G 1 G 1 G 1 G 1 G 3/4 G 3/4 G 1/ BTF/BTFV 33 G 1 G 1 G 1 G 1 G 1 G 1 G 3/4 G 3/4 G 1/ BTF/BTFV 43 G 1 G 1 G 1 G 1 G 1 G 1 G 3/4 G 3/4 G 1/ BTFD/BTFDV 23 G 1 G 1 G 1 G 1 G 1 G 1 G 3/4 G 3/4 G 1/ M CH flow C DHW flow F Domestic cold water inlet R CH return S Re-circulation M1 High temperature CH flow (V version) R1 High temperature CH return (V version) M2 Low temperature CH flow (V version) R2 Low temperature CH return (V version) BTFD/BTDV 31 G 1 G 1 G 1 G 1 G 1 G 1 G 3/4 G 3/4 G 1/ BTFD/BTDV 43 G 1 G 1 G 1 G 1 G 1 G 1 G 3/4 G 3/4 G 1/ ACCESSORIES Item Description Code Remote control 0CREMOTO02 External probe for remote control 0KSONEST00 External probe for use without remote control 0SONDAES01 Electric kit managing 3 central heating zones via remote control. Equipped with external probe. 0CIRCSTA11 Daily timer kit 0KITBEST04 Weekly timer kit 0KITBEST05

5 Life-enhancing heat HYDRAULIC LAYOUTS: B MODEL Domestic cold water PR: CH PUMP PS: DHW PUMP TS: LIMIT THERMOSTAT TA1: ZONE 1 ROOM THERMOSTAT (OPTION) S1: CH PROBE EXTERNAL PROBE WATER TANK WATER TANK PROBE TS S1 PS TS Domestic hot water HEAT EXCHANGER PR TA 1 Or ZONE 1 HIGH TEMPERATURE REMOTE CONTROL BV MODEL Domestic cold water PR: CH PUMP PS: DHW PUMP P1: HIGH TEMPERATURE CH PUMP P2: LOW TEMPERATURE CH PUMP TS: LIMIT THERMOSTAT TSM: LOW TEMPERATURE LIMIT THERMOSTAT VM: MIXING VALVE TA1: ZONE 1 ROOM THERMOSTAT (OPTION) TA2: ZONE 2 ROOM THERMOSTAT (OPTION) TS EXTERNAL PROBE S1 HEAT EXCHANGER PS PR WATER TANK COLLECTOR WATER TANK PROBE P1 M VM P2 TSM Domestic hot water ZONE 1 HIGH TEMPERATURE TA 1 LOW TEMPERATURE CH FLOW PROBE ZONE 2 LOW TEMPERATURE TA 2 Or REMOTE CONTROL

6 Cast iron combination oil-fired boiler with water tank The manufacturer reserves the right to implement modifications without notice. MODEL TECHNICAL DATA BTF / BTFD / BTFV / BTFDV Efficiency rating Heat input Qn kw Heat output Pn kw Efficiency at nominal load % Efficiency at reduced load (30%) % Flue gas heat loss % Casing heat loss % No. of elements of heat exchanger CO 2 value % Flue gas temperature C Bacharach number <1 <1 <1 Flue gas flow rate Kg/h Load loss flue gas side Pa Combustion air flow rate m 3 /kw Water content l CH minimum flow rate l/h Load loss water side ( T=10K) Pa Temperature holding heat loss ( T=50K) % CH water temperature adjustment C Maximum CH working pressure bar CH expansion vessel capacity l DHW expansion vessel capacity l DHW temperature adjustment C Maximum DHW working pressure bar DHW supply ( T=30K) l/10 min Voltage/Frequency V/Hz 230/50 230/50 230/50 Power fuse A Height mm Width mm Depth mm BURNER TECHNICAL DATA MODEL Fuel Oil 1.4 E. Hi=10210 Kcal/kg 20 C Nozzle brand Delavan W, Steinen Q, Danfoss S Nozzle type Usgal/h Nozzle angle 60 W 60 W 60 B Oil pressure pre-adjustment bar Oil consumption Kg/h 2.24 ± 4% 3.06 ± 4% 3.98 ± 4% Pump depression bar > -0.4 > -0.4 > -0.4 Pre-heater W Fuel head pre-adjustment fix fix fix Uff. Pub. Fondital - CTC 03 C Giugno 2006 ( /2006) 9PCGB03C151 FONDITAL S.p.A VESTONE (Brescia) Italy - Via Mocenigo, 123 Tel Fax e mail: info@fondital.it -