MULTISTAGE ELECTRIC PUMPS
|
|
- Brianna Page
- 6 years ago
- Views:
Transcription
1 MULTISTAGE ELECTRIC PUMPS Introduction: BOMBA ELIAS has developed various series of multistage pumps to cover different needs, from those of an individual house to those of large installations such as hospitals, hotels, etc BOMBA ELIAS, leader in multistage sets, has developed high performance equipment, reliable products of advanced technology, robust and with first class components, which are subjected to rigorous testing. Presentation: This manual is composed as follows: Generalities Transport and storage Description of the pump Installation/Assembly Start up, operation, stop Maintenance and conservation Faults: causes and solutions Relative literature SEDE CENTRAL Crta Molins de Rei a Rubí, km Rubí (Barcelona) Tel: Fax: info@elias.es Manual MULTISTAGE ELECTRIC PUMPS Pág: 1
2 Warning on safety and use: These symbols together with the words danger and attention indicate risk possibilities due to not respecting the corresponding indications. DANGER To disregard this warning could mean a risk of electrocution. DANGER To disregard this warning could mean harm to persons or objects. ATTENTION To disregard this warning could mean harm to the installation or to the pump. Before using the equipment, carefully read through this manual, it is necessary for your understanding and correct use of the pump and assures maximum performance whilst considering the safety of the worker. The electric part of the pump should be handled with the pump stopped and WITHOUT TENSION, the terminals box should be closed. The equipment should have electric and hydraulic disconnection devices, as well as allowing any maintenance work to be made safely. Transport and storage: The pump does not require any special transport conditions and is conveniently protected with adequate packing. Description of the pump: They are centrifugal multistage pumps, with the impellers mounted in series. They are designed for working with clean water. They are equipped with electric motors, as per the European standard in force, with first class components, and are subjected to rigorous testing. Manual MULTISTAGE ELECTRIC PUMPS Pág: 2
3 Installation and assembly: The group should be fixed on a flat, solid surface by means of screws using the holes on the motor or on the pump casing, depending on the model in order to avoid unwanted noise and vibrations. It should be situated as near as possible to the water level in order to obtain a minimum suction run and reduce load losses. It should be safe from any possible flooding and well ventilated Assembly of pipes: The diameter of the suction pipe should be the same or larger than the pump entrance and permanently have a minimum upwards slope of 2% to contribute to a correct venting. It is absolutely necessary to place a foot valve with its pertaining filter submerged at least 30 cm. below the dynamic level of the well in order to avoid whirls and consequent air intake. a) Priming when suction is from a well. If a foot valve exists, fill the suction length by means of the primer, recommended in all installations of this nature. Make sure that the foot valve shuts perfectly, in which case the water level will be maintained at a maximum when the pump casing is completely full. b) Priming when suction is on load from a water-tank. Completely shut the gate valve or shut-off valve between the water-tank and the pump, partially loosen the priming plug and open the gate valve. The water will enter in the pump casing and expulse water and air mixed together through the plug. When only water runs out, the group has been primed and the plug should be tightened up again. Make sure that the discharge pipe has a diameter the same or larger than the discharge opening. Neither the suction nor the discharge pipes should rest their weight on the pump. Electrical connection: The electric cable should correspond to EEC standards or to type HO7RN-F as per VDE The electrical installation should be protected by means of a differential switch. Single-phase motors are incorporated with thermal protection. For three-phase motors the end-user should foresee protection as per the legislation in force. The connection symbols (see drawing) make the electric connection easy. Manual MULTISTAGE ELECTRIC PUMPS Pág: 3
4 Controls prior to initial start-up: Check that the tension and frequency of the mains correspond to those indicated on the characteristics plaque. Make sure that the motor shaft turns freely. Check that the sense of rotation of the motor coincides with that indicated on the fan cover. On three-phase motors, if the sense of rotation is incorrect, invert two phases on the protection panel. Start-up: Open all the gate valves that exist on the suction and discharge circuits. Check the absorbed current and duly adjust the thermal relay. If the motor does not work or does not extract water, try to discover the anomaly from the list of the most usual breakdowns and their possible solutions that figure in this manual. Maintenance and conservation: Our pumps do not need any type of maintenance, it is only recommended, in places with a low temperature, to empty the pump of liquid when it is not going to be used. To store the pump, first clean it and keep in a dry place. Connection symbols: Single phase connection Priming Three phase connection Manual MULTISTAGE ELECTRIC PUMPS Pág: 4
5 Advice on safety and use: 1.- The tension indicated on the plaque must be the same as that of the mains. 2.- Check that the working data that figure on the plaque, are those desired. 3.- To connect the pump to the mains, use a switch that cuts off the power. Install a differential switch as protection against lethal electric discharges. Connect the earth of the electric pump. 4.- Control that the motor is well ventilated. 5.- Before start up, prime the pump. 6.- Use the pump for the performance indicated on the plaque. Manual MULTISTAGE ELECTRIC PUMPS Pág: 5
6 7.- Do not install the electric pump within the reach of children. 8.- Do not expose the pump outdoors and be careful with any possible accidental leaks. Be careful of dangerous liquids and atmospheres. 9.- Disconnect the pump from the mains before handling for repairs. Take care against the formation of ice. Faults: Causes and Solutions: FAULT The pump does not start up Blocked shaft Lack of electric power The pump works but does not give its performance Insufficient flow The pump works but does not give its performance Insufficent or unstable flow SOLUTION - Unblock by means of a screwdriver in the shaft ridge. - Check that there is tension on the line - Inadequate thermal - Suction pipe less than the size recommended. - Suction valve partially closed - Air intake on the suction - Unprimed pump - Wrong rotation sense - Suction pipe with counter-slopes that form air pockets. - Suction valve partially closed - Air intake on the suction - Wrong rotation sense - Counter-slopes on the suction that form air pockets - Water leaks Manual MULTISTAGE ELECTRIC PUMPS Pág: 6
7 FAULT SOLUTION The pump works but does not give its performance Leaks through the mechanical seal - Impurities in the pumped liquid - Damaged friction faces - Pump worked dry - Unprimed pump Choked - Vibrations or similar - Suction of particles in suspension - Recirculation with closed discharge - Incorrect electric power - Wrongly connected Incorrect working of the motor - Motor completely or partially choked - The thermal protection has fused. The pump fully turns but does not move the fluid Suction pipe and pump are not primed Repeat the priming steps Blocked impeller Clean it Wrong rotation sense See installation instructions Excessive elevation height Verify the choice of pump The pump gives insufficient flow at nominal pressure Air intake along the suction line or seals Revise the suction line Partially blocked impeller Clean it Excessive elevation height Verify the choice of pump Turning speed small Check motor connections The pump gives insufficient pressure for the nominal flow Turning speed small Check motor connections Air or gas in the fluid Revise the suction line The pump absorbs excessive power Very high turnng speed Check motor connections Liquid density or viscosity very high Check the pumping conditions or choice of pump Excessively high flow or very low pressure Close the discharge valve Mobile part rubs against the fixed part Check tolerances The pump works well at first and then stops Air intake on the suction line Check valves, joints and flanges Pump does not give nominal characteristics Excessive wear of the seal faces of the impeller Substitute the worn parts Blocked valves or pipes Clean them Casing interior or impeller are corroded or worn away Substitute any necessary parts, verify cavitation Leak through discharge casing opening Excessive wear of the seal faces of the impeller Substitute the worn parts Excessive working temperature Bad ventilation of the equipment Better the surrounding ventilation. Very high pumping temperature Re-establish it at its value Faulty mechanical seal Abrasive particles in the fluid Clean the fluid Air pockets in seal chamber Vent or purge it Manual MULTISTAGE ELECTRIC PUMPS Pág: 7
8 Departamento/Département/Department/Abteilung DECLARACIÓN C.E. DE CONFORMIDAD DÉCLARATIÓN C.E. DE CONFORMITÉ E.C. CONFORMITY DECLARATION E.G. KONFORMITÄTSERKLÄRUNG DIRECCIÓN TÉCNICA DIRECTION TECHNIQUE TECHNICAL MANAGEMENT TECHISCHE LEITUNG DECLARAMOS bajo nuestra única responsabilidad que el equipo de trabajo: NOUS DÉCLARONS sous notre unique responsabilité que l equipe de travail: WE DECLARE, under our sole responsibility, that the product: WIR ERKLÄREN hiermit unter Verantwortung, dass die produkt: Marca/Marque/Make/Marke Bomba Elias Tipo/Type/Type/Typ Multistage Modelo/Modèle/Model/Modell Nº Serie/nº Série/Serial Nº/Seriennummer Año construcción/année de construction/year of manufacture/baujahr 2011 se adapta a las normas: /s adapte aux normes: / accords with the regulatión: /den folgenden Normen entspricht: ha sido construido y es conforme con los requisitos esenciales de las Directivas: elle a été construite en conformité avec les conditions essentielles des Directives: has been built in agreement with the essential requirements of the Directives: ist nach den wesentlichen Anforderungen der folgenden Richtlinien konstruiert worden: Directiva de referencia: Directiva de Máquinas 2006/42/CE Norma EN 809 (Seguridad de Máquinas) Directiva de Baja Tensión 2006/95/CE Directiva EMC 2004/108/CE (Compatibilidad electromagnética) Norma armonizada: EN Aplicada en particular EN Directive of reference: Machinery Directive 2006/42/CE Standard EN 809 (Machinery Safety) Low Voltage Directive 2006/95/CE Electromagnetic Compatibility EMC 2004/108/CE Harmonised standard: EN Applied in particular: EN Con exclusión de responsabilidades sobre las partes o componentes adicionados o montados por el cliente. Avec exclusion de responsabilités concernant les parties ou les groupes ajoutés ou montés par le client. With no liability for the parts or components added or assembled by the customer. Unter Haftungsausschlus für die vom Kunden beigestellten oder angebauten Teile order Baugruppen. El fabricante / Le fabricant / The manufacturer / Der Hersteller c.e. mar-11 Fabricado por BOMBA ELIAS Ctra. Molins de Rei a Rubí, km. 8, RUBI (BARCELONA) Teléfono: 34-(93) / Fax: info@elias.es / página web: Francisco Elias Administrador / Administrator Manual MULTISTAGE ELECTRIC PUMPS Pág: 8
HEF7. Adiabatic Cooling System for Air-condensed Water Chillers. Installation and maintenance manual
Installation and maintenance manual HEF7 Adiabatic Cooling System for Air-condensed Water Chillers In compliance with European Union standards for machinery safety, it is essential to read this manual
More informationHardware User s Manual
Hardware User s Manual Behavioral chambers References: LE26M (76-0566) Version: 1.0 Panlab, s.l.u C/Energía, 112 08940 Cornellà de Ll.(Barcelona) Spain www.panlab.com International Calls: +34 934 750 697
More informationOperating Instructions
Operating Instructions VCE2600D«««INDEX 001 TYROLIT No. 1099105912345678 de / dd.mm.yyyy19.04.2011 Congratulations! You have decided to purchase a tried and tested TYROLIT-Hydrostress unit and have thus
More informationInstallation, Operation and Maintenance Manual AIR DEHUMIDIFIER DESICCANT ROTOR TYPE DFRD SERIES
Air Humidity Control Installation, Operation and Maintenance Manual AIR DEHUMIDIFIER DESICCANT ROTOR TYPE DFRD SERIES According to the current European Union Rules on Machinery Safety, the reading of these
More informationUSING AND MAINTENANCE MANUAL FOR SELF-CONTAINED POWER BRUSH MACHINE FOR CARPET AND HARD FLOOR. Elite-Silent. Elite-Silent
USING AND MAINTENANCE MANUAL FOR SELF-CONTAINED POWER BRUSH MACHINE FOR CARPET AND HARD FLOOR Elite-Silent Elite-Silent READ CAREFULLY BEFORE USING THE MACHINE Version 08/02 Generalities The body of the
More informationHardware User s Manual
Hardware User s Manual Isolation box Behavioral chambers References: LE26 (76-0157) Publication: PB-MF-MAN-005-REV1.0 Panlab, s.l.u C/Energía, 112 08940 Cornellà de Ll.(Barcelona) Spain www.panlab.com
More informationThe CE Marking Access to the European Market
The CE Marking Access to the European Market The EU dictates the compliance of guidance and a CE marking for many industrial products, so that these products may attain to the market. The experts of Eurofins
More informationHardware User s Manual
Hardware User s Manual Rotameter References: LE902CC (76-0242) Version: V27/10/2014 Panlab, s.l.u C/Energía, 112 08940 Cornellà de Ll.(Barcelona) Spain www.panlab.com International Calls: +34 934 750 697
More informationHardware User s Manual
Hardware User s Manual References: LE760 (76-0227), LE762 (76-0228) Version: V05/11/2014 Panlab, s.l.u C/Energía, 112 08940 Cornellà de Ll.(Barcelona) Spain www.panlab.com International Calls: +34 934
More informationCTC EcoMiniEl. Installation- and Maintenance Manual. External electric boiler. Providing sustainable energy solutions worldwide
161 505 34-3 2015-09-18 Providing sustainable energy solutions worldwide Installation- and Maintenance Manual External electric boiler 161 505 34-3 2015-09-18 Installation- and Maintenance Manual External
More informationHORIZONTAL MULTISTAGE CENTRIFUGAL PUMP
HORIZONTAL MULTISTAGE CENTRIFUGAL PUMP WWPPCHLFT260 Instructions WWPPCHLFT260_Horizontal Multistage Centrifugal Pump_IB.indd 1 READ THIS MANUAL CAREFULL BEFORE INSTALL, START THE PUMP 1. Suction 2. Plug
More informationManual. Monitoring Device BS
Manual Monitoring Device BS-300-11 TH 42 030 8011 B/E BRANDES GmbH Subject to technical changes! Brandes GmbH - Ohmstr.1 - D 23701 Eutin - Tel.: 04521-8070 - Fax: 04521-80777 www.brandes.de - E-Mail: brandes@brandes.de
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Dust Extractor T12600 READ ALL INSTRUCTIONS BEFORE USING Dear Customer. Thank you for choosing Ermator as your supplier. Introduction We hope that the Ermator dust extractor will
More informationBCF1080 FORWARD PLATE COMPACTORS PARTS BOOK
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-647-953-4100 Fax: 1-647-953-4101 BCF1080 FORWARD PLATE COMPACTORS Doc. # PB-B19017 Orig. Rel. 10/2013 Curr Rev. - 06 Bartell
More informationThis label warns for risk of electrical shock when failing to observe.
MANUAL horizontal centrifugal pumps MB series ic drive SB series mechanical seal 1. Introduction 2. Safety precautions 3. Receipt 4. Installation / Operation and Maintenance 4.1 Installation 4.2 Operation
More informationDL/DLM. Operating instructions Manuel d instructions Instrucciones de uso
DL/DLM Operating instructions Manuel d instructions Instrucciones de uso Scope of delivery for DL/DLM: 1. DL/DLM 2. AAA batteries 3. Quick start guide 4. Device bag 1. 3. 2. 4. 2 DL/DLM operating manual
More informationMANUAL. for heat press. Secabo TC2
MANUAL for heat press Secabo TC2 Congratulations on your purchase of your Secabo heat press! In order to work professionally with the machine and start production, please make sure you read this manual
More informationGLASS WASHING MACHINE INSTRUCTION MANUAL
GLASS WASHING MACHINE INSTRUCTION MANUAL 2 / 19 UYGUNLUK BEYANI DECLARATION OF CONFORMITY KONFORMITÄTSERKLÄRUNG - DÉCLARATION DE CONFORMITÉ DECLARACIÓN DE CONFORMIDAD - DICHIARAZIONE DI CONFORMITÀ TR BİZ,
More informationOPERATING INSTRUCTIONS. for the heat press. Secabo TPD7
OPERATING INSTRUCTIONS for the heat press Secabo TPD7 Congratulations on purchasing a Secabo heat press! Please read these operating instructions carefully so you can start production with your press without
More informationOPERATING INSTRUCTIONS. for the heat press. Secabo TPD12
OPERATING INSTRUCTIONS for the heat press Secabo TPD12 Congratulations on purchasing a Secabo heat press! Please read these operating instructions carefully so you can start production with your press
More informationSELF-PRIMING CENTRIFUGAL PUMPS BMLS-M & BMLS-H
SELF-PRIMING CENTRIFUGAL PUMPS BMLS-M & BMLS-H INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS HP Phase Medium Head High Head 3 1 BMLS 300 M BMLS 300 H 3 3 BMLS 300 M3 BMLS 300 H3 5 1 BMLS 500 M BMLS
More informationV80-H Multistage Pump Instruction Manual
V80-H Multistage Pump Instruction Manual PRODUCT OVERVIEW The VADA horizontal multistage centrifugal pumps combine the functional benefits of centrifugal pumps and the practical benefits of self priming
More informationVADA - V80-H PRODUCT OVERVIEW CONSTRUCTION USAGE LIMITATIONS MOTOR WARRANTY
PRODUCT OVERVIEW The VADA horizontal multistage centrifugal pumps combine the functional benefits of centrifugal pumps and the practical benefits of self priming pumps. They warrant high hydraulic and
More informationIDEAL IDEAL Modular conveyor belt system. Operating Instructions
IDEAL 5009-1 IDEAL 5009-2 Modular conveyor belt system Operating Instructions 1 IDEAL 5009-1 IDEAL 5009-2 2 Table of contents 1. General... 4 1.1 Safety Instructions... 4 1.2 Application... 4 2. Installation...
More informationMANUAL. for heat presses. Secabo TC5 and TC7
MANUAL for heat presses Secabo TC5 and TC7 Congratulations on your purchase of your Secabo heat press! In order to work professionally with the machine and start production, please make sure you read this
More informationDECLARATION OF CONFORMITY
KONFORMITÄTSERKLÄRUNG Manufacturer: Hersteller: Charlottenburger Allee 67 D-52068 Aachen Produkt: MT:2771, 2772, 2773, 2774 Typnummer: Verwendungszweck: Richtlinie: PLC to wireless and ethernet adapter
More informationInstallation, Operation and Maintenance Manual AIR DEHUMIDIFIER DESICCANT ROTOR TYPE MODEL DFRC-0400-E SERIAL Nº: /07
Air Humidity Control Installation, Operation and Maintenance Manual AIR DEHUMIDIFIER DESICCANT ROTOR TYPE MODEL DFRC-0400-E SERIAL Nº: 062006/07 According to the current European Union Rules on Machinery
More informationOPERATING INSTRUCTIONS. for the heat press. Secabo TC D7
OPERATING INSTRUCTIONS for the heat press Secabo TC D7 Congratulations on purchasing a Secabo heat press! Please read these operating instructions carefully so you can start production with your press
More informationOPERATING INSTRUCTIONS. for the heat press. Secabo TCC
OPERATING INSTRUCTIONS for the heat press Secabo TCC Congratulations on purchasing a Secabo heat press! Please read these operating instructions carefully so you can start production with your press without
More informationOperating Instructions for Liquid Level Transducer Model : MM Series
Operating Instructions for Liquid Level Transducer Model : MM Series 1 Contents 1 Contents... 2 2 Note... 3 3 Instrument Inspection... 3 4 Regulation Use... 4 5 Float designs... 4 6 Operating Principle...
More informationDECLARATION OF CONFORMITY KONFORMITÄTSERKLÄRUNG
KONFORMITÄTSERKLÄRUNG Manufacturer: Hersteller: Charlottenburger Allee 67 D-52068 Aachen Produkt: MT:3029, 3034, 3035 Typnummer: Verwendungszweck: PLC to wireless and ethernet adapter PLC zu Wireless und
More informationM LLET. Silo pressure detector. Füllstandtechnik. Operating instructions. 1. Description. 1.5 Dimensions. 1.1 Intended use. 1.
Operating instructions 1. Description 1.1 Intended use The pressure detector controls as limit switch the overpressure in silos and vessels. 1.5 Dimensions 1.2 Function If the pressure reaches the switching
More informationChemical Motor Pump Unit BN
Operating & Maintenance Instructions BW 5 02 01 / 1 The operating instructions of the centrifugal pump and the accessories should be located close to the pump. These instructions should be read carefully
More informationCTC EcoZenith C 530 l 510
Installation and Maintenance Manual CTC EcoZenith C 530 l 510 161 505 77/1 2010-02-18 Table of Contents For the property owner Welcome... 3 Important to remember!... 4 Safety Instructions... 4 Hot water...
More informationDECLARATION OF CONFORMITY
KONFORMITÄTSERKLÄRUNG Manufacturer: Hersteller: Charlottenburger Allee 60 52068 Aachen dlan 1200+ Produkt: MT:2639, 2640, 2641, 2642 Typnummer: Verwendungszweck: Richtlinie: PLC zu Ethernet-Adapter EMV
More informationESG Plus ESG Plus 2. Operating instructions with spare parts list. Tungsten Grinder. Machine-no.:
Operating instructions with spare parts list Tungsten Grinder ESG Plus ESG Plus 2 Machine-no.: Translation of original operating instructions Code 790 052 774 EN All rights reserved, in particular the
More informationOperating Manual Ionizer
Operating Manual Ionizer KERN YBI-01 Version 1.1 03/2013 GB KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen email: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com
More informationVACOOK. Thermocirculator for Sous Vide cooking USE AND MAINTENANCE MANUAL
VACOOK Thermocirculator for Sous Vide cooking USE AND MAINTENANCE MANUAL Warning! This appliance is not suitable to be used by people (children included) with reduced physical or mental capabilities or
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Dust Extractor S13 READ ALL INSTRUCTIONS BEFORE USING Introduction Dear Customer, Thank you for choosing Ermator as your supplier. We hope that the Ermator S13 dust extractor will
More information12/50 CENTRIFUGAL PUMPS FOR DC SUPPLY OPERATING INSTRUCTIONS
12/50 CENTRIFUGAL PUMPS FOR DC SUPPLY OPERATING INSTRUCTIONS Please leave this instruction booklet with the pump as it contains maintenance and safety information (Original Instructions) MODELS 12/50 INDEX.................
More informationOperating instructions For Vibration level switch. Model NSV
Operating instructions For Vibration level switch Model NSV 1. Content 1. Content... 2 2. Note... 4 3. Instrument Inspection... 4 4. Regulation use... 4 5. Operating Principle... 5 6. Mechanical Connection...
More informationUSER MANUAL ELETTROFOG EWB7500 FRANCE
s.r.l. Via F. Guarini 15 47100 Forlì Tel. 0543/780600 Fax. 0543/780069 Rev1 Y-009-C3 18/03/2005 USER MANUAL ELETTROFOG EWB7500 xeda international FRANCE II Zone artisanale n 2 13670 Saint-Andiol Tel. 0490902323
More informationMounting and Operating Instructions EB 5206 EN. Thermostats. Type 5343 Safety Temperature Monitor (STM) Type 5344 Temperature Regulator (TR)
Thermostats Type 5343 Safety Temperature Monitor (STM) Type 5344 Temperature Regulator (TR) Type 5345 Safety Temperature Limiter (STL) Type 5347 Double Thermostat (TR/STL) Type 5348 Double Thermostat (TR/STM)
More informationNHS VERTICAL AGITATOR
INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS NHS VERTICAL AGITATOR INOXPA, S.A. c/telers, 54 Aptdo. 174 E-17820 Banyoles Girona (Spain) Tel. : (34) 972-57 52 00 Fax. : (34) 972-57 55 02 Email: inoxpa@inoxpa.com
More informationUSER GUIDE. DRENA 2 - User Manual ELECTRICAL PANEL FOR 2 MOTORS - WASTE WATER -
USER GUIDE DRENA 2 - User Manual ELECTRICAL PANEL FOR 2 MOTORS - WASTE WATER - II CONTENTS 1. SYMBOLS AND WARNINGS... 5 2. GENERAL INFORMATION... 6 3. WARNINGS... 7 4. GENERAL DESCRIPTION... 8 5. INSTALLATION...
More informationManual Isolating Barrier D461R1 (Revision 01)
D461R1 Manual Isolating Barrier D461R1 (Revision 01) Product Manual Original Instructions valid for models D461R1.11 with 1x signal input into 1x isolated signal output D461R1.12 with 1x signal input into
More informationSuction Drawers LSG-02 D and LSG-02 DE
Suction Drawers LSG-02 D and LSG-02 DE LSG-02 DE equipped with an auto-start-system USER MANUAL Dear customer, Thank you for choosing a product from the Wassermann range. Wassermann DentalMaschinen incorporates
More informationInstructions: Erkopress _motion. Erkopress ci motion
Instructions: Erkopress _motion Erkopress ci motion Instructions: Erkopress _motion Pressure forming unit with automated thermoforming process to connect to the existing compressed air system. Erkopress
More informationTQ Series. Electronic Control Pump Instruction Manual. 50Hz. ISO 9001 Certified Walrus Pump Co., Ltd.
TQ Series Electronic Control Pump Instruction Manual 50Hz ISO 9001 Certified Walrus Pump Co., Ltd. EC Declaration of Conformity Manufacturer: Walrus Pump Co., Ltd. Address: No. 83-14, Dapiantou, Sanjhih
More informationElectric Charcoal Starter OPERATING INSTRUCTIONS
FZG 9001-E 3 Contents 5 CONTTS Electric Charcoal Starter OPERATING INSTRUCTIONS FIGURES.... 3 1. GERAL SAFETY REGULATIONS...... 6 Important safety instructions Packaging User manual 2. MACHINE DESCRIPTION...
More informationPizza Oven. Instruction manual. Model: CP868
Pizza Oven Instruction manual Model: CP868 UK Telephone Helpline: 0845 146 2887 Safety Tips Position on a flat, stable surface. Ensure the surface is capable of supporting its weight. A service agent/qualified
More informationAC6 & AC8 HORIZONTAL SERIES Sealed Metallic Centrifugal Pumps Installation and Maintenance Instructions
AC6 & AC8 HORIZONTAL SERIES Sealed Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY PUMPS WITH MOTORS 1. No assembly required. Unpack the pump and motor and examine for any
More informationManual Isolating Barrier D461 (Revision 05)
D461 Manual Isolating Barrier D461 (Revision 05) Product Manual Original Instructions valid for models D461.11 with 1x signal input into 1x isolated signal output D461.12 with 1x signal input into 2x isolated
More informationMULTI-MAX. A) Application - Operating with wheels Do not work without protection cover
MULTI-MAX Manual 1 MULTI-MAX You have made a good decision buying our MULTI-MAX. This grinding and polishing machine can be universally used with wheels from our linear grinder (POLY-PTX ), all flap discs
More informationAC 4 & 5 HORIZONTAL SERIES Sealed Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY ELECTRICAL CONNECTIONS INSTALLATION
AC 4 & 5 HORIZONTAL SERIES Sealed Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY PUMPS WITH MOTORS 1. No assembly required. Unpack the pump and motor and examine for any
More informationBE1600 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps TAL200, TGL331, TGL501
BE1600 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps TAL200, TGL331, TGL501 Brinkmann Pumpen K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2 Tel.: +49-2392 / 5006-0 Fax.: +49-2392
More informationRev Installation Guide. Sondex Industrial and Marine Pumps
Rev.20112013 Installation Guide Sondex Industrial and Marine Pumps 1. CONTENT 2. Applications... Page 2 3. Operation... Page 3 4. Maintenance... Page 4 5. Dis- and Reassembly... Page 5 6. Wear ring Clearances...
More information1 Declaration of conformity
ENERGY SAVING 1 Declaration of conformity We Taco Italia S.r.l. declare under our sole responsibility that the family of products ENERGY SAVING to which this declaration relates are in conformity with
More information"S" SERIES IMMERSIBLE PUMP OWNER'S MANUAL INSTALLATION OPERATION PARTS Models S12 S16
Webster Pumps "S" SERIES IMMERSIBLE PUMP OWNER'S MANUAL INSTALLATION OPERATION PARTS Models S12 S16 PLEASE READ THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING Webster PUMPS or HAYWARD VALVES,
More informationForced draught gas burner
Installation, use and maintenance instructions Forced draught gas burner Code Model Type 3751982 GAS 3 519T80 291 (3) - 02/2010 DECLARATION Declaration of conformity in accordance with ISO / IEC 17050-1
More informationLaboratory Freeze Dryer CRYODOS
USER S MANUAL Laboratory Freeze Dryer CRYODOS CRYODOS_I_rev0105US Telstar Industrial, S.L. Josep Tapiolas, 120 08226 TERRASSA (Spain) Tel. +34 937 36 16 00 Fax: +34 937 85 93 42 telstar@etelstar.com www.etelstar.com
More informationCAN60 / CAN60SV _01 CAN60_CAN60SV. WARNING: Read the instructions before using the appliance.
CAN60 / CAN60SV 60901870_01 CAN60_CAN60SV GB IE WARNING: Read the instructions before using the appliance. [01] x 1 [02] x 1 [03] x 2 [04] x 1 1 : 1 [05] x 4 (4x 32mm) [6] x 2 (3x 12mm) Cooker hood GB
More informationCentrifugal pump type WK
D Centrifugal pump type WK GB Operator s Manual 27220 - B EG-Konformitätserklärung Déclaration de conformité pour la CEE / EC-Declaration of Conformity / CEE-Certificado de Conformidad / Dichiarazione
More informationSTORAGE, ERECTION, OPERATION AND MAINTENANCE MANUAL FOR CENTRIFUGAL FANS MODEL - MXE
ISO 9001 : 2000 STORAGE, ERECTION, OPERATION AND MAINTENANCE MANUAL FOR CENTRIFUGAL FANS MODEL - MXE CUSTOMER : 1 CONTENTS 1 SAFETY... 5 1.1 General... 6 1.2 Description of symbols and pictograms... 6
More informationInstruction manual. Submersible sump pump. Safety instructions Application Electrical connection Installation Maintenance Technical data
Instruction manual Submersible sump pump Safety instructions Application Electrical connection Installation Maintenance Technical data U 3 K /2 U 3 KS /2 U 3 K spezial /2 U 3 KS spezial /2 U 5 K /0 U 5
More informationLight oil - kerosene burner
Installation, use and maintenance instructions Light oil - kerosene burner One stage operation CODE MODEL TYPE 374374 G3B 437T 90 (4) - 05/0 TECHNICAL FEATURES TYPE 437T Thermal power output 9 35 kw.6
More informationBE3082 Operating Instructions (Translation of original)
BE3082 Operating Instructions (Translation of original) BRINKMANN Cutter pumps SFC820 1120 Brinkmann Pumpen K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2 Tel.: +49-2392 / 5006-0 Fax.: +49-2392 / 5006-180
More informationKREBS DUO. - Assembly instructions. - Safety indications. - How to start and handle the machine. - Inspection and maintenance
SPOT REMOVAL SYSTEM KREBS DUO - Assembly instructions - Safety indications - How to start and handle the machine - Inspection and maintenance - Trouble (cause and remedies) - Electric diagrams - Spare
More informationEG KONFORMITÄTSERKLÄRUNG EC DECLARATION AND MANUFACTURER S DECLARATION OF CONFORMITY CE DÉCLARATION DE CONFORMITÉ CE DICHIARAZIONE DI CONFORMITÀ
Page 1 of 5 Manufacturer's Name: Business Address: Medical Device(s): Classification: GMDN Code and Term: Scope of Application: EG KONFORMITÄTSERKLÄRUNG EC DECLARATION AND MANUFACTURER S DECLARATION OF
More informationBE2870 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps SFL
BE2870 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps SFL650 1150 Brinkmann Pumpen K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2 Tel.: +49-2392 / 5006-0 Fax.: +49-2392 / 5006-180
More informationTH100 Three in One Instant Hot Water Tap
TH100 Three in One Instant Hot Water Tap Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu
More informationBE3900 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps TH/STH45 TH/STH360
BE3900 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps TH/STH45 TH/STH360 Brinkmann Pumpen K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2 D-58791 Werdohl Tel.: +49-2392 / 5006-0
More informationHazardous Location Heaters. Thermostat INSTRUCTION MANUAL
Hazardous Location Heaters Thermostat INSTRUCTION MANUAL Rev. K 2018 nvent P/N 89115890 TABLE OF CONTENTS Warranty and Return Policy...2 Application...3 Control Accuracy...3 Technical Data...3 Design Data...3
More information"S" SERIES IMMERSIBLE PUMP OWNER'S MANUAL INSTALLATION OPERATION PARTS Models S2 S4 S5 SS6 SS7 S8
Webster Pumps "S" SERIES IMMERSIBLE PUMP OWNER'S MANUAL INSTALLATION OPERATION PARTS Models S2 S4 S5 SS6 SS7 S8 PLEASE READ THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING Webster PUMPS or HAYWARD
More informationInstallation Guide. Termix Distribution unit. 1.0 Table of Contents. 1.0 Table of Contents
1.0 Table of Contents 1.0 Table of Contents... 1........................................................................ 2 2.0 Functional description... 3 3.0 Safety notes... 4 3.1 Safety Notes general............................................
More informationPart No KEMPER Filter-Master XL
Part No. 150 0492 KEMPER Filter-Master XL 1. Application and Mode of Operation.... 2 2. Safety Instructions......... 2 3. Placing into Operation...... 3 4. Operation Elements and Function... 3-4 5. Installation
More informationUSER MANUAL AND INSTALLATION CEPHIRUS-2. CV
USER MANUAL AND INSTALLATION CEPHIRUS-2 www.casals.com INDEX SECURITY RULES AND MARKING CE GENERAL RULES MAINTENANCE EQUIPMENT WARRANTY CONDITIONS OF INSTALLATION RESIDUAL RISKS SIGNALS PLACED ON THE MACHINE
More informationSOUND-INSULATED FAN. Iso-K OPERATION MANUAL. Iso-K_v.1(2)-EN.indd :20:59
SOUND-INSULATED FAN OPERATION MANUAL _v.1(2)-en.indd 1 10.08.2015 15:20:59 CONTENT Introduction 3 General 3 Safety rules 3 Transport and storage requirements 3 Manufacturer's warranty 3 Fan design 4 Delivery
More informationISCG90SS _03 ISCG90SS
ISCG90SS 60900355_03 ISCG90SS GB IE [01] x 1 [02] x 1 [03] x 1 [04] x 8 [05] x 1 [06] x 4 [07] x 1 [08] x 1 [09] x 1 [10] x 4 [11] x 4 [12] x 1 [13] x 4 (6x70mm) [14] x 8 (6.3x17x2mm) 1 : 1 [15] x 4 (3.9x18mm)
More informationDOMINATOR IT - ISTRUZIONI ORIGINALI IN LINGUA ITALIANA
DOMINATOR IT - ISTRUZIONI ORIGINALI IN LINGUA ITALIANA IT PAGE 1 EN PAGE 5 F PAGE 9 D PAGE 13 E PAGE 17 NL PAGE 21 P PAGE 25 DK PAGE 29 FIN PAGE 33 N PAGE 37 S PAGE 41 GR PAGE 45 PL PAGE 49 RO PAGE 53
More informationRisk assessment and analysis for swing gates
Risk assessment and analysis for swing gates Rev 3.00 In conformity with the Machinery Directive 98/37/EC and applicable parts of the EN standards EN 13241-1; EN 12453; EN 12445; EN 12635 01/09/2007 Note:
More information02PN8 HI-PE/CF --- Rev. F044GB60K10 1
02PN8 HI-PE/CF --- Rev. F044GB60K10 1 METAL DETECTOR HI-PE Additional information for the HI-PE/CF Series ATTENTION! Keep the transducer matched with the electronics unit and the Technical Booklet which
More informationSlim Bottle Cooler. Instruction manual. Model: CS586
Slim Bottle Cooler Instruction manual Model: CS586 UK Telephone Helpline: 0845 146 2887 Safety Tips Position on a flat, stable surface. A service agent/qualified technician should carry out installation
More informationBox60/ 70/ 90. Box60_70_90 v8
Box60/ 70/ 90 Box60_70_90 v8 GB IE [01] x 1 [02] x 2 [03] x 1 [04] x 2 [05] 60cm, 70cm x 2 90cm x 3 [06] x 1 [07] x 1 1 : 1 [09] x 6 (3.9 x 32mm) [08] x 6 [10] x 4 (3.4 x 10mm) Box60/ 70/ 90 GB IE Cooker
More informationOperating Manual MS220Vi and MSR220Vi
ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße 13, D 74523 Schwäbisch Hall + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA Mains Monitoring Digital Panelmeters MINIPAN
More informationVacuum System Troubleshooting Author: Keith Webb, P.E. Application Engineering Manager
INTRODUCTION The science of creating vacuum is often misunderstood and when the desired vacuum condition is not being achieved in a manufacturing setting this usually means production comes to a halt and
More informationLight oil burners. One stage operation
Installation, use and maintenance instructions Light oil burners One stage operation CODE MODEL TYPE 3505 RDB CF 38 50 T3 350050 RDBR CF 6 50 TR 35050 RDBR CF 33 50 TR 35050 RDBR CF 38 50 T3R 350650 RDBR
More informationSMART EVO 2 - User Manual ELECTRICAL PANEL FOR 2 MOTORS
SMART EVO 2 - User Manual ELECTRICAL PANEL FOR 2 MOTORS CONTENTS 1. INTRODUCTION... 5 2. WARNINGS... 6 3. GENERAL DESCRIPTION... 7 4. INSTALLATION... 8 5. LUMINOUS INDICATORS AND COMMANDS... 9 6. DIP-SWITCH
More informationOPERATING MANUAL ORWAK March 2005 PUBL. NO Edition 4
GB OPERATING MANUAL ORWAK 3400 March 2005 PUBL. NO 4869057-00 Edition 4 English TABLE OF CONTENTS Safety... 82 Operating instructions... 93 Technical specifications. 104 Dimensional drawing... 104 Transport...
More informationAcquaer Ltd. H-4900, Fehérgyarmat, Szatmári út 11. CENTRIFUGAL PUMP Instruction Manual ACm60 / ACm75 / ACm150 / ACm150B2
CENTRIFUGAL PUMP Instruction Manual ACm60 / ACm75 / ACm150 / ACm150B2 Congratulations on your purchase of a LEO Centrifugal Pump It is important that you read, fully understand and observe the following
More informationBE1530 Operating Instructions (Translation of original) BRINKMANN Free Flow-Immersion Pumps SFT
BE1530 Operating Instructions (Translation of original) BRINKMANN Free Flow-Immersion Pumps SFT1300 1400 Brinkmann Pumpen K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2 Tel.: +49-2392 / 5006-0 Fax.: +49-2392
More informationInduction Cooker Instruction Manual. Model Modèle Modell Modello Modelo Malli : CN203
Induction Cooker Instruction Manual Model Modèle Modell Modello Modelo Malli : CN203 UK Safety Tips Position on a flat, stable surface. A service agent/qualified technician should carry out installation
More informationKITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE
KITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE 2 GLEC-6 - Installation and maintenance CONTENTS 1 Important information... 3 2 Safety notes... 3 3 Technical description...4 4 Transport... 6 5
More informationCRU 200 and 500 Series Condensate Recovery Unit Installation and Maintenance Instructions
6810850/1 IM-P681-07 ST Issue 1 CRU 200 and 500 Series Condensate Recovery Unit Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationSIRIO Contatore di energia Energy meter
SIRIO Contatore di energia Energy meter ATTENZIONE - La Elcontrol Energy Net S.p.a. declina ogni responsabilità per eventuali danni a persone o cose originati da un uso improprio o da errato impiego dei
More informationOperation Manual. Trash Water Pump ARTICLE Image similar
Operation Manual Trash Water Pump ARTICLE 50781 Image similar Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further
More informationOperating Instructions TSF 010. Power Failure Venting Unit PM BNE/L (0007)
Operating Instructions TSF 010 Power Failure Venting Unit PM 800 032 BNE/L (0007) Index Page 1. Safety Instructions... 2 1.1. Pictogram Definitions... 2 2. Understanding The Power Failure Venting Unit...
More informationMultistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR
Multistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR General DICKOW-pumps of series HZ/HZA are single- or multistage centrifugal pumps with shaft sealing. Application HZ/HZA-pumps are applied
More informationOperating Instruction Centrifugal fans without scroll (Translation of the Original) BA-RLE-AC /2014 RLE RLA
Operating Instruction Centrifugal fans without scroll (Translation of the Original) EN RLE RLA Content 1. Important information 2. Safety notes 3.Technical description 4. Transport 5. Mounting / Installation
More informationOWNERS GUIDE TO INSTALLATION AND OPERATION
OWNERS GUIDE TO INSTALLATION AND OPERATION SPM SERIES HIGH POWER CENTRIFUGALS READ THESE INSTRUCTIONS CAREFULLY Read these installation instructions in detail before installing your pump. Be sure to check
More information