frigo turbo FL Chillers

Transcription

1 frigo turbo FL FRIGO TURBO FL Packaged water cooled liquid chillers in A class energy efficiency for indoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded evaporator and shell and tube condenser. Cooling Capacity: 280,0 1840,0 kw Refrigerant charge: R134a Technical Catalogue: T_FRGTRBFL_1014_GB

2 INDEX EUROVENT CERTIFICATION...3 GENERAL CHARACTERISTICS...3 SERIES IDENTIFICATION...3 MODEL IDENTIFICATION...3 WORKING LIMITS...4 COMPONENTS...6 OPTIONAL ACCESSORIES...8 TECHNICAL DATA...9 ACOUSTIC DATA...13 ELECTRIC DATA...13 MICROPROCESSOR CONTROL SYSTEM...14 OPTIONAL ACCESSORIES RILHEVA - PLANT MONITORING AND MANAGEMENT GPRS SOLUTION MACHINE DRAWINGS...17 MASTER PLANT SEQUENCER

3 EUROVENT CERTIFICATION This product has been certified by Eurovent. RC GROUP SpA participates in the EUROVENT program for: LCP and HP (Liquid Chilling Packages and Heat Pumps). Check ongoing validity of certification on-line: GENERAL CHARACTERISTICS FRIGO TURBO FL: Water cooled liquid chillers for chilled water production equipped with oil-free centrifugal compressors and flooded evaporator The machines are made for indoor installation. Framework with sections of thick steel for high resistance to the greatest stress during handling and transport. Machines supply fully assembled with refrigerant charge and control systems. The installation requires only electrical and hydraulic connections allowing costs and time savings. Final assembly on all machines before shipment including running test, reading and monitoring of operating parameters, alarms simulation and visual check. Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO RC Group has been the first Italian company in its segment to get the ISO 9001 in October 13 th, 1991 with certificate ICIM Environmental Management System Certification according to ISO 14001:2004. The machines are in full compliance with European Directives 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments. SERIES IDENTIFICATION FRIGO TURBO FL Water cooled liquid chillers equipped with oil-free centrifugal compressors, flooded evaporator and shall and tube condenser. Cooling capacity: kw MODEL IDENTIFICATION FRIGO TURBO FL 280 T 1 P4 280 Cooling capacity (kw) at nominal conditions T TURBO centrifugal compressor 1 Compressor number P4 Machine with shell and tube 4-passes condenser 3

4 WORKING LIMITS EVAPORATOR: 8 22 C Range of chilled fluid inlet temperature C Range of chilled fluid outlet temperature. 4 6 C Δt operation between the inlet and outlet chilled fluid % Ideal water flow range compared to the nominal value reported in the technical data table % Extended water flow range compared to the nominal value reported in the technical data table. WARNING The deviation of the water flow from ideal range towards extended range can cause a remarkable performance worsening. Please contact the RC GROUP Commercial Department to verify operation conditions. CONDENSER: C Range of water outlet temperature (in relation to the machine model) C Δt operation temperature between the inlet and outlet water % 2-passes type: range of water flow allowed from the nominal value reported in "Technical data table" % 4-passes type: range of water flow allowed from the nominal value reported in "Technical data table".. 40% Maximum concentration of antifreeze solution (Ethylene or Propylene Glycol) WARNING Please contact the RC GROUP Commercial Department in case of use of other antifreeze different from the ones listed. WORKING AREA Condenser outlet water temperature ( C) Legend: Models: 280 T1, 560 T2, 840 T3 β Models: 380 T1, 760 T2, 1140 T3, 1520 T4 Models: 460 T1, 920 T2, 1380 T3, 1840 T4 Compression ratio between the values of absolute and suction pressure. Chilled fluid outlet temperature ( C) Limit curves (identified by a letter on the graphic above): A) Minimum compression ratio; B) Maximum evaporation pressure; C) Maximum condensing temperature; D) Maximum electric absorption (maximum compression ratio); E) Minimum evaporating pressure; F) Minimum rotation speed. WARNING The values are indicative. For further information and limit operation conditions, please contact the RC GROUP Commercial Department. IMPORTANT SPECTRUM web application, allows the energy performances evaluation at partial loads. 4

5 ANTIFREEZE MIXTURES EVAPORATOR HYDRAULIC CIRCUIT Machines can work with antifreeze mixtures although not necessary, because the machines do not accept outlet temperature of the liquid cooled below 4 C, the use of glycol mixture is a generic antifreeze protection, for machines not in operation during the winter season. CONDENSER HYDRAULIC CIRCUIT In case of heat exhaustion through a close hydraulic circuit on a dry cooler, is mandatory to load the circuit with antifreeze mixture. The choice of glycol percentage may be based on the following table: Freezing point [ C] % Ethylene glycol volume % Propylene glycol volume STORING TEMPERATURE If the machine is not installed on receipt and is stored for a long time, store it in a protected place, at temperatures ranging between -30 C and 50 C in absence of superficial condensation and direct sun light. 5

6 COMPONENTS FRAMEWORK Base and self supporting frame in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders. Colour: RAL 9002 COMPRESSORS Twin-turbine centrifugal compressor, oil-free type, optimized for R134a refrigerant. The term "oil-free" refers to the total absence of lubricating oil within the compressor. Magnetic levitation bearings. Manometric compression ratio: Stepless capacity control trough integrated inverter. High efficiency permanent-magnet synchronous motor with integrated Soft-Start system (starting current limited to 5A). Power factor motor cosφ > 0.9 for a large part of the operating range Motor and electronic power section cooling by liquid refrigerant injection into the integrated cooling circuit. Electric motor thermal protection via internal winding temperature sensors. Electronic integrated control for operation and alarms status. Sensor on refrigerant discharge for temperature monitoring. Inner sensors for electronic components and inverter temperature control. Security system to protect the crankshaft and magnetic bearings in the event of failure of power supply. Degree of protection: IP54. EVAPORATOR Flooded shell and tube evaporator, optimized for R134a refrigerant. Version two passes, characterized by low pressure losses on the water side. Water tubes with a helical rifled internal surface. Integrated liquid drop separator. Shell, header, tube sheets made of carbon steel, tubes in Cu. Anticondensate insulation made of polyurethane. Large liquid level indicator. Temperature sensors on water inlet and outlet. Water flow switch for water flow control on water outlet towards the plant, not installed but supplied in kit. Hydraulic connections with grooved end supplied as standard with flexible joint and adapter pipe to be welded. CONDENSER Shell and tube 2-passes condenser optimized for R134a refrigerant. - Machine type P4: 4-passes condenser. Shell, header, tube sheets made of carbon steel, tubes in Cu. Hydraulic connections with grooved end supplied as standard with flexible joint and adapter pipe to be welded. From model 280 T1 to model 560 T2 included the connections are supplied in mounting kit. Installation to be made by the customer. REFRIGERANT CIRCUIT Components for each refrigerant circuit: Capacitive level sensor connected to the driver of the expansion valve. Electronic expansion valve that allows high performance and system efficiency and for the refrigerant level control in the evaporator. Electronic by-pass valve for compressor start. Non return valve on by-pass line for compressor start. Sight glass. Filter dryer on liquid line. Service valve on liquid line. Service valve on gas suction and discharge. Non return valve on gas suction. Safety valve on low pressure side. Safety valve on high pressure side. Pressure transducers with indication, control and protection functions, on low and high refrigerant pressure. High pressure safety switch with manual reset. Refrigerant circuit with copper tubing with anticondensate insulation of the suction line. Plastic capillary hoses for pressure sensors connection. R134a refrigerant charge. 6

7 ELECTRICALPANEL In accordance with EN norms, suitable for indoor installation, complete with: Main switch with door lock safety. Fuses for compressors. Contactors for compressors. Transformer for auxiliary circuit and microprocessor supply. Panel with machine controls. Power supply 400/3/50. CONTROL SYSTEM Microprocessor system with Touch Screen graphic display for control and monitor of operating and alarms status. The system includes: - Voltage free contact for remote general alarm. - Main components hour-meter. - Recording of the last 24 occurred alarms. - Non-volatile Flash memory for data storage. - Menu with protection password. HYDRAULIC CONNECTIONS OF HEAT EXCHANGERS The heat exchangers threaded hydraulic connections are available up to a diameter of 2,5 " included, and correspond to ISO 228/1 G M. The pipes threaded hydraulic connections are available up to a diameter of 2,5" included, and correspond to ISO 7/1 R. The hydraulic connections with grooved end are supplied as standard with flexible joint and adapter pipe to be welded. The hydraulic connections with flange (FL) are supplied with counter flange and kit for flexible joint. The kit includes the flexible joint and two adapter pipes to be welded. 7

8 OPTIONAL ACCESSORIES The descriptions of these additional components can be found in Chapter OPTIONAL ACCESSORIES. RILHEVA. Plant monitoring and management GPRS solution. OTHER ACCESSORIES Isolation mounts: RC GROUP recommends installing the machine on continued support, for example rubber slab. Rubber shock absorbers, not installed. Spring supports are not allowed. Compressor soundproof cap for a noise reduction of about 3 db(a). Analog flowmeter (0 1V / 4-20mA) for evaporator s water flow measurement and display. The optional accessory stop the machine in case of water flow anomalies. Electrical network analyzer: measurement and display of the machine electrical engaged power (kw). Multimeter kit, consisting of analog flowmeter and network analyser. Allows to display the energy efficiency of the unit. Microprocessor accessories: - Data Logger function for the recording of events, configurable. - RC-Com MBUS/JBUS serial port; - LON serial port; - BACnet per Ethernet - SNMP - TCP/IP serial port; - BACnet per MS/TP serial port; - Modem GSM serial port. WARNING RC GROUP reserves the right to determine the compatibility of combinations of accessories required in the order. 8

9 TECHNICAL DATA MODEL 280 T1 280 T1 380 T1 380 T1 460 T1 460 T1 TYPE (1) P4 P4 P4 COOLING CAPACITY (2) kw Compressors power input kw 54,0 53,3 73,2 71,3 88,5 86,6 Compressors operating current A EVAPORATOR Water flow rate m³/h 48,2 48,2 65,4 65,4 79,1 79,1 Pressure drops kpa CONDENSER Water flow rate m³/h 57,5 35,8 78,0 48,5 94,3 58,8 Pressure drops kpa COMPRESSORS centrifugal centrifugal centrifugal centrifugal centrifugal centrifugal Quantity n Maximum current (FLA) A Starting current (LRA) A Stepless capacity control (*) % % % % % % % EVAPORATOR n Water volume l Min water flow rate m³/h Max water flow rate m³/h CONDENSER n Water volume l Max water flow rate m³/h REFRIGERANT R134a R134a R134a R134a R134a R134a Refrigerant charge kg Gas circuits n POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFICIENCY INDEXES EER Energy Efficiency Ratio (2) kw/kw 5,05 5,11 5,05 5,15 5,07 5,15 ESEER - Eurovent Standard 8,45 8,45 8,46 8,46 8,63 8,63 SOUND LEVEL Average sound pressure level [LPm] (3) db(a) 69,5 69,5 69,9 69,9 71,7 71,7 Sound power level [Lw] (4) db(a) 87,5 87,5 87,9 87,9 89,7 89,7 DIMENSIONS Length mm Width mm Height mm NET WEIGHT kg HYDRAULIC CONNECTIONS EVAPORATOR Inlet/outlet OD (5) Ø mm 114,3 114,3 114,3 114,3 168,3 168,3 CONDENSER Inlet/outlet - OD (5) Ø mm 139,7 114,3 139,7 114,3 139,7 114,3 1. Standard machine: 2-passes condenser Type P4 machine = 4-passes condenser 2. Referred to chilled water temperature 12/7 C and condenser water temperature 30/35 C according to Eurovent standard. Type P4: water to the condenser 30/37 C. 3. Average sound pressure level [LPm] 1m far according to ISO EN Sound power level [Lw] according to ISO EN Hydraulic connection with grooved end, supplied as standard with flexible joint and adapter pipe. (*) Referred to condenser water inlet temperature 18 C. 9

10 TECHNICAL DATA MODEL 560 T2 560 T2 760 T2 760 T2 840 T3 840 T3 TYPE (1) P4 P4 P4 COOLING CAPACITY (2) kw Compressors power input kw 108,0 107,2 146,0 141,8 161,0 159,5 Compressors operating current A EVAPORATOR Water flow rate m³/h 96,3 96,3 131,0 130,7 144,0 144,5 Pressure drops kpa CONDENSER Water flow rate m³/h 115,0 71,7 156,0 96,9 172,0 107,4 Pressure drops kpa COMPRESSORS centrifugal centrifugal centrifugal centrifugal centrifugal centrifugal Quantity n Maximum current A Starting current A Stepless capacity control (*) % % % % % 8 100% 8 100% EVAPORATOR n Water volume l Min water flow rate m³/h Max water flow rate m³/h CONDENSER n Water volume l Max water flow rate m³/h REFRIGERANT R134a R134a R134a R134a R134a R134a Refrigerant charge kg Gas circuits n POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFICIENCY INDEXES EER Energy Efficiency Ratio (2) kw/kw 5,05 5,05 5,09 5,21 5,05 5,06 ESEER - Eurovent Standard 8,70 8,70 8,88 8,88 8,53 8,53 SOUND LEVEL Average sound pressure level [LPm] (3) db(a) 71,5 71,5 71,7 71,7 71,6 71,6 Sound power level [Lw] (4) db(a) 89,7 89,7 89,9 89,9 90,7 90,7 DIMENSIONS Length mm Width mm Height mm NET WEIGHT kg HYDRAULIC CONNECTIONS EVAPORATOR Inlet/outlet OD (5) Ø mm 168,3 168,3 168,3 168,3 168,3 168,3 CONDENSER Inlet/outlet - OD (5) Ø mm 139,7 114,3 168,3 139,7 168,3 139,7 1. Standard machine: 2-passes condenser Type P4 machine = 4-passes condenser 2. Referred to chilled water temperature 12/7 C and condenser water temperature 30/35 C according to Eurovent standard. Type P4: water to the condenser 30/37 C. 3. Average sound pressure level [LPm] 1m far according to ISO EN Sound power level [Lw] according to ISO EN Hydraulic connection with grooved end, supplied as standard with flexible joint and adapter pipe. (*) Referred to condenser water inlet temperature 18 C. 10

11 TECHNICAL DATA MODEL 920 T2 920 T T T T T3 TYPE (1) P4 P4 P4 COOLING CAPACITY (2) kw Compressors power input kw 172,0 170,2 211,0 207,3 260,0 251,2 Compressors operating current A EVAPORATOR Water flow rate m³/h 158,0 158,2 196,0 196,1 237,0 237,4 Pressure drops kpa CONDENSER Water flow rate m³/h 188,0 117,2 232,0 144,8 282,0 175,4 Pressure drops kpa COMPRESSORS centrifugal centrifugal centrifugal centrifugal centrifugal centrifugal Quantity n Maximum current A Starting current A Stepless capacity control (*) % % % 8 100% 8 100% 9 100% 9 100% EVAPORATOR n Water volume l Min water flow rate m³/h Max water flow rate m³/h CONDENSER n Water volume l Max water flow rate m³/h REFRIGERANT R134a R134a R134a R134a R134a R134a Refrigerant charge kg Gas circuits n POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFICIENCY INDEXES EER Energy Efficiency Ratio (2) kw/kw 5,15 5,17 5,23 5,27 5,12 5,24 ESEER - Eurovent Standard 8,59 8,59 8,72 8,72 8,57 8,57 SOUND LEVEL Average sound pressure level [LPm] (3) db(a) 73,1 73,1 72,5 72,5 73,1 73,1 Sound power level [Lw] (4) db(a) 91,8 91,8 91,6 91,6 92,2 92,2 DIMENSIONS Length mm Width mm Height mm NET WEIGHT kg HYDRAULIC CONNECTIONS EVAPORATOR Inlet/outlet OD (5) Ø mm 168,3 168,3 219,1 219,1 219,1 219,1 CONDENSER Inlet/outlet OD (5) Ø mm 168,3 139,7 168,3 139,7 168,3 139,7 1. Standard machine: 2-passes condenser Type P4 machine = 4-passes condenser 2. Referred to chilled water temperature 12/7 C and condenser water temperature 30/35 C according to Eurovent standard. Type P4: water to the condenser 30/37 C. 3. Average sound pressure level [LPm] 1m far according to ISO EN Sound power level [Lw] according to ISO EN Hydraulic connection with grooved end, supplied as standard with flexible joint and adapter pipe. (*) Referred to condenser water inlet temperature 18 C. 11

12 TECHNICAL DATA MODEL 1520 T T T T4 TYPE (1) P4 P4 COOLING CAPACITY (2) kw Compressors power input kw 281,0 276,0 346,0 335,7 Compressors operating current A EVAPORATOR Water flow rate m³/h 261,0 261,4 316,0 316,5 Pressure drops kpa CONDENSER Water flow rate m³/h 310,0 193,1 376,0 233,9 Pressure drops kpa COMPRESSORS centrifugal centrifugal centrifugal centrifugal Quantity n Maximum current A Starting current A Stepless capacity control (*) % 6 100% 6 100% 6 100% 6 100% EVAPORATOR n Water volume l Min water flow rate m³/h Max water flow rate m³/h CONDENSER n Water volume l Max water flow rate m³/h REFRIGERANT R134a R134a R134a R134a Refrigerant charge kg Gas circuits n POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFICIENCY INDEXES EER Energy Efficiency Ratio (2) kw/kw 5,23 5,28 5,14 5,24 ESEER - Eurovent Standard 8,78 8,78 8,73 8,73 SOUND LEVEL Average sound pressure level [LPm] (3) db(a) 73,1 73,1 74,6 74,6 Sound power level [Lw] (4) db(a) 92,5 92,5 94,0 94,0 DIMENSIONS Length mm Width mm Height mm NET WEIGHT kg HYDRAULIC CONNECTIONS EVAPORATOR Inlet/outlet - OD (5) Ø mm 219,1 219,1 219,1 219,1 CONDENSER Inlet/outlet OD (5) Ø mm 168,3 139,7 168,3 139,7 1. Standard machine: 2-passes condenser Type P4 machine = 4-passes condenser 2. Referred to chilled water temperature 12/7 C and condenser water temperature 30/35 C according to Eurovent standard. Type P4: water to the condenser 30/37 C. 3. Average sound pressure level [LPm] 1m far according to ISO EN Sound power level [Lw] according to ISO EN Hydraulic connection with grooved end, supplied as standard with flexible joint and adapter pipe. (*) Referred to condenser water inlet temperature 18 C. 12

13 ACOUSTIC DATA MODELLO 280 T1 380 T1 460 T1 560 T1 760 T2 840 T3 280 T1 P4 380 T1 P4 460 T1 P4 560 T1 P4 760 T2 P4 840 T3 P4 Sound power level [Lw] (1) db(a) 87,5 87,9 89,7 89,7 89,9 90,7 Average sound pressure level [LPm] at 1m (2) db(a) 69,5 69,9 71,7 71,5 71,7 71,6 [LPm] at 5m (2) db(a) 60,7 61,1 62,9 62,8 63,0 63,5 [LPm] at 10m (2) db(a) 55,6 56,0 57,8 57,8 58,0 58,6 MODELLO 920 T T T T T4 920 T2 P T3 P T3 P T4 P T4 P4 Sound power level [Lw] (1) db(a) 91,8 91,6 92,2 92,5 94,0 Average sound pressure level [LPm] at 1m (2) db(a) 73,1 72,5 73,1 73,1 74,6 [LPm] at 5m (2) db(a) 64,7 64,4 65,0 65,1 66,6 [LPm] at 10m (2) db(a) 59,8 59,5 60,1 60,3 61,8 1. Sound power level [Lw] according to ISO EN Average sound pressure level [LPm] according to ISO EN IMPORTANT For further information about units acoustic data, please refer to The Noise bulletin of RC GROUP technical literature. ELECTRIC DATA MAXIMUM ELECTRIC ABSORPTION CALCULATION This chapter is showing the maximum electrical absorption calculation of unit (A), corresponding to extreme working conditions. The involved components are the following: Compressors electric motor The electrical data of the various components are indicated in the relative technical data sheets. EXAMPLE n.1: Calculation for FRIGO TURBO FL 560 T2: MAXIMUM ELECTRIC ABSORPTION Compressors A 270,0 Maximum electric absorption A 270,0 13

14 MICROPROCESSOR CONTROL SYSTEM The microprocessor controls the machine guaranteeing on the one hand a precise and punctual temperature regulation, on the other hand integrating the safety functions relative to all fluid-dynamic circuits.the microprocessor controls the outlet temperatures of the chilled water through two set parameters, xk1 e xk2, as outlet temperatures from the evaporators, with possible remote commutation through voltage free contact. In any case, the microprocessor will modulate the electric input to the compressors motors to guarantee the maximum temperature precision in respect of the working range allowed by the centrifugal compressors. For multi-compressor units, for any working condition, the control will cleverly manage the number of compressors to be activated in a combined optics of safety and energy saving. The system includes: Compact controller for DIN rail mounting 24Vac 50/60Hz. 16-bit microprocessor MB flash memory (retains data without power) and memory RAM 512kB. Recording of the last 24 occurred alarms. Graphic touch screen colour display. KEYBOARD DESCRIPTION KEY 1 KEY 2 KEY 3 KEY 4 KEY 5 KEY 5 KEY 7 LED 10 LED 11 LED 12 Turn On or Off the machine. Silence the alarm acoustic signal and display the informative mask of the active alarms. Display the main screen or returns to previous level. Not used Runs pages within each menu and decreases the displayed value Runs pages within each menu and increases the displayed value Move the cursor within each menu and confirm the inclusion of a parameter. alarm signal LED Compressor in operation LED Power on LED VIRTUAL KEYBOARD DESCRIPTION (TOUCH SCREEN) Display to show input values Numeric keyboard. 3 Ok Key to confirm the value entered. 4 Esc Key to annul the operation. 5 Bk Sp Key to cancel wrong data entered. 6 Key to decrease the value. 7 Del Key to cancel wrong data entered. 8 Key to increase the value. 9 +/- Key to define whether the value is positive (+) or negative (-) 14

15 MAIN MASK (TOUCH SCREEN) Name of the application software Date Time Active Set point Set Point Compensation Machine operation state display area: Evaporator chilled water inlet/outlet temperatures Touch-screen: access to the information mask and programming menu. Touch-screen: Alarm icon display area. Access to the information mask of the active alarms. Evaporator chilled water inlet/outlet temperatures Compressors control signal (%) Condenser inlet/outlet water temperature Compressors icons display area Refrigerant Type Display of the high/low pressure values for each refrigerant circuit. Expansion valve control. Evaporator/Condenser water pumps icons display area (pumps not supplied). DISPLAY OF THE UNITS ENERGY EFFICIENCY. Is possible to display the machine s cooling capacity, power input and energy efficiency through the installation of dedicated optional accessories. To display the evaporator water flow and the machine cooling capacity is mandatory the installation of the flowmeter optional accessory. To display the machine power input is mandatory the installation of the network analyzer optional accessory. To display the machine energy efficiency is mandatory the installation of the multimeter kit optional accessory, consisting of analog flowmeter and network analyser. Display of the evaporator water flow Display of the power input Display of the cooling capacity Display of the unit energy efficiency REMOTE CONTROLS/ALARMS INLETS 1 External enabling 2 Cooling set-point changeover (xk1 - xk2) OUTLETS 1 General alarm 1 - (programmable) 2 General alarm 2 - (programmable) remote controls/alarms; voltage free controls/alarms IMPORTANT For further information, please refer to the installation, use and maintenance manual of the unit. 15

16 OPTIONAL ACCESSORIES RILHEVA - PLANT MONITORING AND MANAGEMENT GPRS SOLUTION. Rilheva is a part of the RC Group Artificial Intelligence. Is the most advanced solution in unattended monitoring and remote management for an air conditioning plant. Rilheva can be used everywhere in the World, through an easy web access from mobile devices such as PC s, tablets or smartphones. The solution is available for PC, tablet and smartphone: Thanks to an easy access to rcgroup.rilheva.it website the user is provided with an interface that allows him to operate directly on the field. Dedicated apps for Android and ios operative systems are available for the mobile network access. Each device can manage up to 400 Modbus registers and up to 31 (linked in serial) RC Group units: Air conditioners; Liquid chillers; Heat pumps and multifunction units. MAIN FEATURES: Real time plant s check; Units remote control (start/stop, set point modification, alarms reset); Customizable visualization and analysis (historical) of each unit data; Charts creation and export; Data monitoring on maps; SMS, Mail, Speech Synthesis, FAX and APP (ios e Android) notifications; Integration of different devices in the system (pumps, cameras, etc.) through RS485 communication ports on ModBus RTU communication protocol. MAIN COMPONENTS: The system is factory assembled and it includes: RILHEVA electronic card that measures physical data (pressure, levels, temperatures, failures, unit conditions, ) through RS485 communication ports on ModBus RTU communication protocol and transmits them with a GPRS modem to a central server where they are stored, elaborated and made available to enabled users through the use of a common internet browser. Omni-directional dual band (900 and 1800MHz) antenna with magnetic base for data transmissions and receptions. Modular transformer TMC 15/12 230V / V AC 15 VA for the power supply. IMPORTANT The optional accessory requires the installation of the serial port RCcom MBUS/JBUS on each unit to control (optional accessory, not included). The optional accessory requires also the installation of a SIM card with an internet data subscription with a mobile phone provider (not included) and an annual subscription to RC GROUP service. ADDITIONAL MODULE FOR plan CONNECTION When the RS 485 serial connection is not available in the units to control is possible to connect Rilheva to a plan network. This option requires an additional module installation. The additional module is electrically supplied by the same modular transformer used for RILHEVA. The additional module is linked to RILHEVA by the RS232 communication port. RC GROUP SERVICE SUBSCRIPTION Several annual subscription forms are available. Please contact RC Group for further information. RILHEVA ELECTRONIC CARD WARNING For further information please consult the Rilheva TECHNICAL CATALOGUE. 16

17 MACHINE DRAWINGS Dimensions in mm MODEL 280 T1 17

18 MACHINE DRAWINGS Dimensions in mm MODEL 380 T1 18

19 MACHINE DRAWINGS Dimensions in mm MODEL 460 T1 19

20 MACHINE DRAWINGS Dimensions in mm MODEL 560 T2 20

21 MACHINE DRAWINGS Dimensions in mm MODEL 760 T2 21

22 MACHINE DRAWINGS Dimensions in mm MODEL 840 T3 22

23 MACHINE DRAWINGS Dimensions in mm MODEL 920 T2 23

24 MACHINE DRAWINGS Dimensions in mm MODEL 1140 T3 24

25 MACHINE DRAWINGS Dimensions in mm MODEL 1380 T3 25

26 MACHINE DRAWINGS Dimensions in mm MODEL 1520 T4 26

27 MACHINE DRAWINGS Dimensions in mm MODEL 1840 T4 27

28 MASTER PLANT SEQUENCER Master Plant SEQuencer is part of the RC Group Artificial Intelligence. Master Plant SEQuencer offers some useful tools for the management of several units installed in parallel on a hydronic network: liquid chillers; heat pumps, multifunction units and dry coolers. HIGHLIGHTS The choice of RC Group reliable, made with hi-tech components, with extremely high energy efficiency units is only the first step. Only with proper plant measurements, analysis and control instruments is possible to grant a long-lasting efficiency and quality. The features of Master Plant SEQuencer add value to the installed units, to the plant and to the building. ENERGY SAVINGS MAXIMIZATION Master Plant SEQuencer maximizes energy savings by the activation of the RC Group units that offer the highest possible efficiency according to the required working conditions. Master Plant SEQuencer: Is directly connected with the RC Group units using MP COM microprocessor by a serial link; Automatically recognizes the type of RC Group chiller and acquires the key information by a plug and play logic (SEQuencer has in its memory the mapping of the RC Group chillers); Always activates the chiller offering the highest possible efficiency according to the required working conditions optimizing the plant s energy efficiency. Cuts energy bills significantly. NOISE REDUCTION Master Plant SEQuencer follows all the law requirements against noise, installation in the historic city centres and noise limitation during night hours. It is possible to program the limitation of the units acoustic emission in time slots. OPTUMUM EFFICIENCY OF THE UNITS Master Plant SEQuencer collects all the plant information in a single supervision point, it allows real time plant control and analysis, granting greater efficiency and durability. Master Plant SEQuencer makes the plant last longer and grant its full efficiency also through the dedicated functions such as the installed units working hours equalization and programmed maintenance automatic requests sending. PLANT MONITORING AND MANAGEMENT IN SINERGY WITH RILHEVA RC Rilheva System is part of the RC Group Artificial Intelligence. It is the most advanced solution in unattended monitoring and remote management for an air conditioning plant. The combination of the optional accessory RILHEVA with Master Plant SEQuencer allows: The entire plant or units real time unattended monitoring of the main physical data (pressure, levels, temperatures, failures, unit conditions, ) even in mobility, everywhere in the World, through an easy web access from PC s, tablets or smartphones; The system performance analysis over time, charts creation and export. Units remote control. For further information please consult the chapter on RILHEVA in this catalogue. APPLICATION FIELDS The sequencer can be applied to: 2-pipe and 4-pipe plants; In parallel installed units; Up to 5 liquid chillers, even different in type and size; - Liquid chillers; - Heat pumps and multifunction units; supplied by other manufacturers, different from RC Group; Fixed speed and variable flow pumps. Dry coolers. The sequencer CANNOT be applied to: In series installed units. Air conditioners; Rooftop units; Air handling units; The device is designed to work in standalone mode or in combination with a BMS supervisor: It can work in standalone mode with its own graphics interface and its own 7"graphic touch screen display. It can be linked to a supervision system using BACnet or ModBus protocols (serial port are supplied as options). Master Plan SEQuencer Installazione in cabinet dedicato The software interface is available in English. WARNING For further information please consult the Master Plant SEQuencer TECHNICAL CATALOGUE. 28

29 29

30 30

31 31

32 The continuous improvement of products may imply changes in the data shown in this catalogue. RC GROUP S.p.A. Via Roma, Valle Salimbene (PV), Italy Tel. +39 (0) Fax +39 (0) T_FRGTRBFL_1014_GB RC Group S.p.A. is a company of