MB-T Moisture analyzers
|
|
- Daniel Henry
- 6 years ago
- Views:
Transcription
1 Start up Guide MB-T Moisture analyzers
2 To view a complete user manual scan QR code.. CONTENT Moisture Analyzer x Disposable pan x 0 Cross-shaped holder x Drying pan handle x Drying pan shield x Power cord x. UNPACKING TOP 3 Keep the packaging should a warranty claim or service be required.
3 3. WORKROOM AND BASIC OPERATION GUIDELINES o +40 C o +04 F o +0 C +50 of h w Operate the device in a room where the temperature ranges between 0 40 C (50 04 F) and where the relative humidity is below 80%. Place the balance on a solid surface to ensure stability. To obtain stable and repeatable weighing results, an anti-vibration table is recommended. h 00 cm (39 ) w 0 cm (8 ) w Keep space free around the device: h = min. 00 cm (39 in.), w = min. 0 cm (8 in.). Place the balance away from heat sources. Avoid exposing the balance to the sunlight. Avoid exposing the balance to a magnetic field. Do not weigh magnetic substances. Avoid air drafts and air movements at the workstation. Make sure that the balance is placed on an even surface. Do not place the balance on an unstable surface exposed to shocks and vibrations. Not intended for usage within EX zones. Not intended for weighing explosive or flammable substances. Not to be opened in the course of operation since the heating components reach very high temperature. Be extremely careful while taking the sample out. The sample and the moisture analyzer elements may be hot.
4 4. ACTIVITIES TO BE DONE PRIOR TO OPERATION Grounding spring check 3 Check the grounding spring. Make sure that the grounding spring juts slightly out of the hole. Remove the base insert. Install the base insert. 5. COMPONENTS ASSEMBLY 3 Slowly rotate the cross-shaped holder, keep rotating until the holder sinks deeper. 4 5
5 6. PREPARING FOR WORK Place the device at the workstation, wait until it reaches room temperature. 6.. Balance temperature stabilization time COM -4 h Prior switching the device on let it reach room temperature (estimated stabilization time: -4 hours). et USB 405W 0V/ AC 60Hz SB U Ethern Connect the power cord into the AC socket located at the back of the device. Connect the device to the mains. 6.. Balance leveling To level the balance, turn its feet and keep turning the feet until the air bubble takes the central position Switch the balance on The moisture analyzer is ready to operate! It is recommended to carry out adjustment operation prior running to the WEIGHING mode: read point 8.. (adjustment is not required for DRYING). To switch the device on, press ON / OFF key. USB USB Ethe
6 7. PANEL AND SCREEN 7.. Panel keys Proximity sensor Proximity sensor Entering balance setup Switching on / off Confirming an operation or printing a report Displaying previous screen Taring Zeroing 7.. Home screen Press to display list of working modes: WEIGHING / DRYING List of current working mode functions Status bar Weighing result window Enabled for editing info fields (labels, text boxes, buttons) providing current drying parameters Editable tool bar with quick access keys Parameters Users Database Drying mode Open / Close the chamber Working mode parameters Start Databases
7 8. BASIC OPERATIONS 8.. Adjustment It is recommended to carry out adjustment operation prior to running the WEIGHING mode (adjustment is not required for DRYING). External adjustment is carried out using an external mass standard of the right accuracy and weight value, which value depends on balance type and capacity. Prior to adjustment prepare the right mass standard. You are recommended to use mass standard of class F or F. View the table and select the mass standard you need. Caution! Make sure that the disposable weighing pan has been installed (read point 5.5.). Do not close the drying chamber in the course of adjustment. Balance model Mass standard [g] MB-T-50H 50 MB-T MB-T-0 00 Products Press "Parameters button. 3 0 Respective parameters list is displayed, select Adjustment option. 4 Unload the weighing pan and press button for confirmation. Press "External Adjustment parameter. 5 6 Wait for completion of the start mass determination process. Load the weighing pan with mass standard and press button for confirmation.
8 7 8 Unload the weighing pan. Wait for the process completion. 8.. Zeroing The balance has been zeroed. Unload the weighing pan and press "Zeroing" button Taring When the weighing result has been displayed press "Tare" button. The balance has been tared.
9 8.4. Drying profiles / Drying process finish modes Press to view list of drying profiles. Drying profiles: Press to view list of drying process finish modes. Drying process finish modes: Standard: the most precise moisture content measurement Automatic: triggered in accordance with automatic settings Fast: for samples with moisture content between 5% - 5% Manual: triggered manually by the user Mild: for substances sensitive to intense heat impact Time-defined: triggered after passage of declared time Step: for substances with moisture content higher than 5% User-defined: triggered in accordance with user settings
10 9. SETTINGS Some balance settings are accessible for Administrator exclusively. Prior to balance parameters setup, log in as the Administrator. 9.. Administrator's login Press "Operators" button. Users list is displayed, select Admin option. 4 3 Press 3 button to activate numeric keyboard. Enter "" password and press button to confirm. You have logged in the administrator.
11 9.. User settings Prior to balance users setup, log in as the Administrator. Press "Databases" button. 3 Select Operator database. 4 Press "Add" button. 5 Select "Name" parameter. 6 Enter user name. 7 Following the above procedure, set remaining parameters: Code: Enter user ID Password: Enter user password Access levels: Set respective access level (user, advanced, admin) User name has been entered.
12 9.3. Proximity sensors setup Prior to proximity sensors setup, log in as the Administrator. You can assign the proximity sensors with different functions for each working mode (the sensors will trigger different operation for each working mode). The diagram presents sensors setup for the weighing mode. Parameters list is displayed, select Working Modes parameter. Press "Parameters" button. 3 4 Select Proximity Sensors parameter. Select Weighing parameter. 6 5 Select Right Sensor parameter. Select function that is to be assigned to the right proximity sensor. In order to set left sensor function repeat steps 5 and 6, this time select Left Sensor parameter. Following the above procedure you can also set sensors for remaining working modes.
13 0. SAMPLES AND DRYING METHODS 0.. Preparing samples Optimal sample structure and size are crucial features influencing measurements speed, accuracy and repeatability. Solids: - sample crushing necessary, - sample of low weight required, - large sample surface. Samples with low moisture content: - sample of heavy weight required (0-5 g). Liquids: - large sample surface. 0.. Handling hazardous samples Some sample types require particular caution! They may pose risk for people and objects. It is the moisture analyzer operator who is responsible for potential loss being a result of such samples use. Substances that in the course of heating may emit vapours causing corrosion (e.g. acids). Apply small amount of samples, this helps to prevent risk of depositioning of vapour over cool housing components. Explosive and flammable substances and substances that in the course of heating emit flammable vapours. Apply small amount of samples and lower drying temperature, this helps to prevent flames from rising and explosion. Use glasses and protective gloves. Toxic and corrosive substances and substances that in the course of heating emit toxic vapours. Due to risk of eyes, skin and lungs irritation, and due to risk of death, such samples must be dried in fume cupboard.
14 . PERIPHERAL DEVICES CONNECTORS Power cord Computer Printer Ambient conditions module Barcode scanner AC DB9 DC RS 3 USB Ethernet USB USB-A RJ45 USB-B Keyboard Barcode scanner Computer Printer Computer Printer
15 . DEVICE CLEANING.. General Recommendations Use soft cloths made of microfiber, Apply the cleanser onto the cloth first. Prior to cleaning, it is necessary to Avoid applying the cleanser directly disconnect the balance from the mains. natural fiber or man-made fiber. Avoid using abrasive cloths or cloths that might onto the device. scratch the surface. Avoid using cleansers containing chlorine, corrosive chemicals and bleach. Do not use cleansers containing abrasive substances or scouring preparations... Glass components Prior to cleaning the glass panes, it is necessary to disassemble them first. For detailed instruction on panes disassembly, refer to user manual. Clean glass components using a solution of water and detergent (liquid soap, dish-washing detergent, glass cleaner, etc.). In case of heavy contamination, a mild solution of vinegar or baking soda can be used..3. Plastic components Prior to cleaning the plastic housing, it is necessary to disassemble weighing pan components (cover, weighing pan, etc.). Clean plastic components using a solution of water and detergent (liquid soap, dish-washing detergent, glass cleaner, etc.)..4. Stainless steel components Prior to cleaning the stainless steel components, it is necessary to disassemble them first. Clean stainless steel components using a solution of water and detergent (liquid soap, dish-washing detergent, glass cleaner, etc.). In case of heavy contamination, a mild solution of vinegar or baking soda. can be used.
16 65 East Bunker Court Vernon Hills IL 6006 USA Phone: Fax:
VWR B2T Series Balances
Start up Guide VWR B2T Series Balances 1. CONTENT Balance x 1 Weighing pan x 1 Grounding foot x 1 Foot x 3 Power adapter x 1 2. WORKROOM AND BASIC OPERATION GUIDELINES +40 o C +104 o F +10 o C +50 o F
More informationNumber of instruction: LMI-11-02/01/08/ENG-C. Moisture analyzer MBC series
Number of instruction: LMI-11-02/01/08/ENG-C Moisture analyzer MBC series JANUARY 2008 2 1. TECHNICAL PARAMETERS... 5 2. BASIC INFORMATION... 6 2.1. Balance appropriation... 6 2.2. Usage conditions...
More informationUser Manual. Moisture Analyzer HE53
User Manual Moisture Analyzer HE53 Overview Heating Module 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 17 19 20 Legend 1 Heating module 2 Handles for opening heating module 3 Protective glass 4 Reflector
More informationRevolutionary Science RS-IF-202
Instruction Manual for the Revolutionary Science RS-IF-202 Incufridge TABLE OF CONTENTS PAGES Recommended Safeguards 2 Introduction 3 Operating Instructions 4 Care and Maintenance 5 Specifications 5 Contact
More informationThis document hosted by: Instruction Manual MB120 Moisture Analyzer
This document hosted by: www.oldwillknottscales.com Instruction Manual Moisture Analyzer Table of Contents 1. GETTING TO KNOW YOUR MOISTURE ANALYZER... 1 1.1 Introduction... 1 1.2 Overview of the Moisture
More informationMOISTURE ANALYZER PMC SERIES
User manual no.: IMMU-12-03-04-14-USA MOISTURE ANALYZER PMC SERIES BALANCES AND SCALES RADWAG 26 600 Radom, Bracka 28, POLAND Phone: +48 (0-48) 38 48 800, fax. +48 (0-48) 385 00 10 Email: office@radwagusa.com
More informationMoisture analyzer PMC series
Number of instruction: LMI-01-01/10/11/USA Moisture analyzer PMC series MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG 26 600 Radom, Bracka 28 Street, POLAND phone +48 48 38 48 800, phone/fax.
More informationInstruction Manual MB90 Moisture Analyzer
Instruction Manual Moisture Analyzer EN-1 Table of Contents 1. GETTING TO KNOW YOUR MOISTURE ANALYZER... 4 1.1 Introduction... 4 1.2 Overview of the Moisture Analyzer... 4 1.3 What is a Moisture Analyzer?...
More informationUser Manual. Moisture Analyzer HC103
User Manual HC103 Overview drying unit 13 12 11 10 9 1 2 3 8 4 22 Legend 5 6 7 14151617 18 19 1 Sample chamber 2 Level indicator 3 Sample pan handler 4 WVGA color display (touch screen) 5 Leveling screw
More informationFagronLab NP-1 UV. Negative pressure workbench. User Manual
Negative pressure workbench User Manual Table of contents 1. Introduction... 3 2. Service... 3 3. Warranty... 3 4. Application range... 4 5. Main technical parameters... 4 6. Performance index... 5 Vibration
More informationTovatech LLC Phone (973) Rutgers St, Maplewood, NJ 07040
Moisture content is a quality control criterion signifying the amount of moisture in a product. Laws as well as industry trade associations define the correct moisture content for a broad range of products
More informationRefrigerated Incubator Model and Operating Instructions
Refrigerated Incubator Model 165000 and 165000-2 Operating Instructions N2400379 - Rev. 1 08May2018 1 Contents 1. SAFETY...3 1.1. EMF INTERFERENCE...4 1. PRODUCT INFORMATION...5 1.1 INTRODUCTION...5 2.
More informationInstruction Manual for the Revolutionary Science RS-IF-203 Incufridge
Instruction Manual for the Revolutionary Science RS-IF-203 Incufridge REVOLUTIO NARY SCIENCE Manufacturer of Precision Laboratory Equipment Table of Contents Introduction 2 Recommended Safeguards 3 Operating
More informationIonizer (Static Remover) STABLO-EX Instruction Manual
321-56879-21E Jan. 2009 For Electronic Balances Ionizer (Static Remover) STABLO-EX Instruction Manual Read the instruction manual thoroughly before you use the product. Retain this instruction manual for
More informationKERN MFB Type MGE Version GB
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating manual Electronic bathroom scales KERN
More informationWeighing Solutions for Hazardous Areas FULL COMPLIANCE WITH ATEX DIRECTIVE
Weighing Solutions for Hazardous Areas FULL COMPLIANCE WITH ATEX DIRECTIVE PUE HX5.EX explosion-proof hazardous area indicator ATEX APPROVAL PUE HX5.EX is a cutting-edge weighing indicator, designed to
More informationCERAMIC FAN HEATER URBAN
EN CERAMIC FAN HEATER URBAN OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions;
More informationOperating Instructions. Moisture Analyzer MJ33
Operating Instructions Moisture Analyzer MJ33 Overview of your MJ33 Moisture Analyzer 2 1 18 MJ33 C L A S S I C L i g h t 11 17 12 16 15 14 13 19 1 20 24 2:54 88 C 23 22-12.48 % MC 21 8 10 7 9 5 25 26
More informationSPR7-OS SPR601-OS SCR600L-OS SPR601-OSRC SCR600L-OSRC SP6DSSTB-OS
FELIX STORCH, INC. SUMMIT APPLIANCE DIVISION SPR7-OS SPR601-OS SCR600L-OS SPR601-OSRC SCR600L-OSRC SP6DSSTB-OS OUTDOOR REFRIGERATORS USE AND CARE GUIDE Please read before using this appliance and retain
More informationOPERATING INSTRUCTIONS
EN CERAMIC FAN HEATER OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure
More informationULTRA LOW TEMPERATURE FREEZER. User Manual
ULTRA LOW TEMPERATURE FREEZER User Manual Note:Kaltis reserves the right to modify any parts of this manual without prior notice. 1. No part of this manual may be reproduced in any form, or translated
More informationInfrared Moisture Determination Balance FD-610. Operating Manual
Infrared Moisture Determination Balance FD-610 Operating Manual Infrared Moisture Determination Balance Safety Notes Improper use of the infrared moisture tester in violation of the following safety notes
More informationCountertop Refrigerator
Countertop Refrigerator 048-GM-48314 GENERAL SAFETY RULES WARNING: Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including
More informationUser s Manual. Electric Kettle Model MJ-EK5AEU (UK) Household Use
Electric Kettle Model MJ-EK5AEU (UK) Household Use User s Manual Thank you for your purchase. Please read this User s Manual before using this product. Retain this User s Manual for future reference. Contents
More informationHalogen Moisture Analyzer
Halogen Moisture Analyzer About the Halogen Moisture Analyzer Mode XY-105MW XY-102MW XY-100MW Specification 110g/5mg 110g/2mg 110g/1mg Readability 5mg 2mg 1mg Tray size Φ 90 Heating mode Halogen Lamp Display
More informationMS-H-Pro-T Magnetic Hotplate-Stirrer with Timer
MS-H-Pro-T Magnetic Hotplate-Stirrer with Timer User Manual MS-H-Pro T Magnetic Hotplate-Stirrer with Timer Please read the User Manual carefully before use, and follow all operating and safety instructions!
More informationInstruction Manual for the Revolutionary Science RS-PB-200 Dual Poly Pro Bath
Instruction Manual for the Revolutionary Science RS-PB-200 Dual Poly Pro Bath REVOLUTIONARY SCIENC E Manufacturer of Precision Laboratory Equipment Table of Contents Introduction 2 Recommended Safeguards
More informationOPERATION MANUAL. StableTemp Economy Mechanical Convection Oven. Model : ,-90,-91,-92,-93,-94
OPERATION MANUAL StableTemp Economy Mechanical Convection Oven Model : 52412-89,-90,-91,-92,-93,-94 This operation manual describes the important subjects on maintaining the product s functions, safety,
More informationCleaning (Preventative Maintenance) on the magicolor 2400 Series
Cleaning (Preventative Maintenance) on the magicolor 2400 Series Read all caution and warning labels carefully, making sure to follow any instructions contained in them. These labels are located on the
More informationHave a Question? Call toll-free: Owners Manual L WARNING. Project Series Paint Sprayers Important Safety Instructions
Owners Manual 333394L EN Project Series Paint Sprayers Important Safety Instructions Read all warnings and instructions in this manual and on the unit, including the power cord. Be familiar with the controls
More informationOperating Instructions Moisture Analyzer HB43-S
Operating Instructions Moisture Analyzer HB43-S Overview of your HB43-S Halogen Moisture Analyzer 2 1 21 Substance A 12 20 13 19 14 18 17 16 15 22 23 24 1 25 A Substance A 29 2:54 88 C 11 8 28 27-12.48
More informationInstruction Manual for the Revolutionary Science RS-PB-100 Poly Pro Bath TABLE OF CONTENTS
Instruction Manual for the Revolutionary Science RS-PB-100 Poly Pro Bath TABLE OF CONTENTS PAGES Recommended Safeguards 2 Introduction 3 Operating Instructions 4 Care and Maintenance 5 Specifications 5
More informationMagnetic Stirring Systems with Heat
Sharing your passion for making jewelry. Products. Service. Know-how. Magnetic Stirring Systems with Heat 335-212 Digital Ceramic Magnetic Stirring System with Heated Stand 335-211 Ceramic Magnetic Stirring
More informationOWNER S MANUAL FOR AIR ADMIRAL VACUUM/PRESSURE STATION MODELS:
OWNER S MANUAL FOR AIR ADMIRAL VACUUM/PRESSURE STATION MODELS: 79202-00 79202-05 79202-30 79202-35 Approval Agency s Model 79202-00 & 79202-05 Model 79202-30 & 79202-35 Not recommended for pumping acid,
More informationUser Manual / Installation Instructions
User Manual / Installation Instructions Outdoor Refrigerator MODEL: L24REF Lynx Professional Grills 5895 Rickenbacker Rd., Commerce, CA 90040 Service: (888) 289-5969 Tel: (323) 838-1770 Fax: (323) 838-1778
More informationG-7s. Instruction Manual. G-Series Cooler COUNTERTOP COOLER. Part No.11IPA
G-Series Cooler COUNTERTOP COOLER Part No.11IPA-061000 Instruction Manual FOR YOUR FUTURE REFERENCE This easy-to-use manual will guide you in getting the best use of your cooler. Remember to record the
More informationReacti-Therm I and III Heating/Stirring Modules
INSTRUCTIONS Reacti-Therm I and III Heating/Stirring Modules TS-18821 TS-18823 Number TS-18821 TS-18823 Description Reacti-Therm I Heating/Stirring Module (single block) Reacti-Therm III Heating/Stirring
More informationPond Pump 280 / 420 / 575. Operating instructions Notice d emploi Instrucciones de uso
Pond Pump 280 / 420 / 575 Operating instructions Notice d emploi Instrucciones de uso REMINDER CALL 1-866-627-3435 BEFORE RETURNING TO STORE. Part Description QTY A Pump 1 B 3/4 in. ID tubing adapter with
More informationTECHNOLOGY IN MOTION MACO PROTECT DOOR LOCKS. Operating and maintenance instructions for door locks END USERS
TECHNOLOGY IN MOTION MACO DOOR LOCKS Operating and maintenance instructions for door locks END USERS Table of Contents Proper use and misuse 3-4 Safety and warning information 5-6 Operating instructions
More informationISHIDA CO., LTD. Do not carry out installation, operation, service or maintenance until thoroughly understanding the contents of this manual.
Do not carry out installation, operation, service or maintenance until thoroughly understanding the contents of this manual. Keep this manual available at all times for installation, operation, service,
More informationMETAL CERAMIC FAN HEATER
EN METAL CERAMIC FAN HEATER OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions;
More informationOperating Manual Bathroom Balance
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen email: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating Manual Bathroom Balance KERN MGB Version
More informationNote To The User: This product has updated features not yet mentioned in the product manual.
PLEASE READ BEFORE OPERATING THE PRODUCT--- Note To The User: This product has updated features not yet mentioned in the product manual. Celsius / Fahrenheit toggle: To switch the reading between Celsius
More informationG-10s. Instruction Manual. G-Series Cooler UPRIGHT COOLER. Part No.11IPA
G-Series Cooler UPRIGHT COOLER Part No.11IPA-062800 Instruction Manual FOR YOUR FUTURE REFERENCE Thank you for using our product. This manual will guide you in getting the best use of your cooler. Remember
More informationInstallation and Operation Manual CLEARVIEW DAY COVER CAUTION: To view a video scan the QR code above
Installation and Operation Manual CLEARVIEW DAY COVER To view a video scan the QR code above CAUTION: Please read this manual completely before attempting to install, operate or service this equipment
More informationUNDERCOUNTER REFRIGERATORS AND FREEZERS Installation, Operation and Maintenance Instructions
UNDERCOUNTER REFRIGERATORS AND FREEZERS Installation, Operation and Maintenance Instructions Please read this manual completely prior to installing and operating this equipment. This manual describes how
More informationREFRIGERATED PREP TABLES Installation, Operation and Maintenance Instructions
REFRIGERATED PREP TABLES Installation, Operation and Maintenance Instructions Please read this manual completely prior to installing and operating this equipment. This manual describes how to install,
More informationOperator s Manual. Histology Bath
Operator s Manual Histology Bath 110-827 05.09.12 Table of Contents Introduction... 2 General Safety Information... 2 Safety Recommendations... 3 Unpacking Your Histology Bath...4 Contents...4 Components
More informationELECTRIC HEATER WITH CARBON FIBER HEATING ELEMENTS
EN ELECTRIC HEATER WITH CARBON FIBER HEATING ELEMENTS OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe
More informationThermal Electric Wine & Beverage Chiller. Model: WC-20TL (20 Standard Bottle Capacity) Instruction Manual
Thermal Electric Wine & Beverage Chiller Model: WC-20TL (20 Standard Bottle Capacity) Instruction Manual READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THIS APPLIANCE IMPORTANT SAFETY INSTRUCTIONS
More informationMiniAmp Thermal Cycler and MiniAmp Plus Thermal Cycler Installation and Operation
QUICK REFERENCE MiniAmp Thermal Cycler and MiniAmp Plus Thermal Cycler Installation and Operation Catalog Numbers A784, A785 Pub. No. 0007040 Rev. C.0 Note: For safety and biohazard guidelines, see the
More informationMETAL SHARK COMBI Flat metal detector for textile and non-woven products. Metal sensitivity from Fe 0,3 mm
METAL SHARK COMBI Flat metal detector for textile and non-woven products Metal sensitivity from Fe 0,3 mm METAL SHARK - The new generation in metal detecting technology Introducing the METAL SHARK presenting
More informationCO 2. Incubators. Incubator, the first microprocessor-based system, and the first menu-driven control system, but we offer the
Radiant Warm Wall Compact Incubator Reduced Oxygen Incubator Automatic Water-Jacketed Incubator, stacked For more than 45 years, Lab-Line has been on the cutting edge of incubator development. Not only
More informationLaboratory Equipment Pty Ltd Instruction Manual Incubator IWJ Page 1
Laboratory Equipment Pty Ltd Instruction Manual Incubator IWJ Page 1 Introduction Congratulations on the choice of an Australian made quality product. Labec products are manufactured, tested and calibrated
More informationTIH 300 S / TIH 400 S / TIH 500 S / TIH 700 S / TIH 900 S / TIH 1100 S
TIH 300 S / TIH 400 S / TIH 500 S / TIH 700 S / TIH 900 S / TIH 1100 S EN OPERATING MANUAL INFRARED HEATING PANEL TRT-BA-TIH300S-TIH400S-TIH500S-TIH700S-TIH900S-TIH1100S-TC-002-EN Table of contents Notes
More informationUSER S MANUAL. Centrifugal inline fan. VKMz 100 Q VKMz 100 VKMz 125 Q VKMz 125. VKMz 250 Q VKMz 250 VKMz 315 Q VKMz 315
USER S MANUAL VKMz 100 Q VKMz 100 VKMz 125 Q VKMz 125 VKMz 150 VKMz 160 VKMz 200 Q VKMz 200 VKMz 250 Q VKMz 250 VKMz 315 Q VKMz 315 Centrifugal inline fan VKMz CONTENTS Contents... 2 Safety requirements...
More informationBUILT-IN OVEN MODEL: EBO-E7081D(SS) Owner s Manual Please read this manual carefully before operating your set. Retain it for future reference.
BUILT-IN OVEN MODEL: EBO-E7081D(SS) Owner s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the
More informationBLAZE ORIGINAL INSTRUCTIONS MANUAL
BLAZE ORIGINAL INSTRUCTIONS MANUAL Cautions for the first use Remember, safety should be your first priority. 1. Please make sure that you disconnect all other electronic devices connected to the power
More informationOperating instructions Electronic Moisture Analyser
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating instructions Electronic Moisture Analyser
More informationOperating instructions Electronic Moisture Analyser
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating instructions Electronic Moisture Analyser
More informationPropane Flame Projector Safety instructions and operating manual
Bigflame Propane Flame Projector Safety instructions and operating manual 1 Flame projector Bigflame Safety instructions Caution The directions in this manual must be followed strictly. It is imperative
More informationENVIRONMENT FRIENDLY CLIMATIC CHAMBER
ZERO OZONE DEPLETION POTENTIAL ODP NEGLECTIBLE GLOBAL WARMING POTENTIAL GWP ENVIRONMENT FRIENDLY CLIMATIC CHAMBER KK-50 DFA TK-50 CKA KK-730 DFA TK-730 CKA Environment friendly solution for temperature
More informationPR-L2466W- PA. Operating Instructions. High Performance Refrigerator PR-L2466W-PA
Operating Instructions High Performance Refrigerator PR-L2466W- PA PR-L2466W-PA Please read these instructions carefully before using this product, and save this manual for future use. See page 11 for
More informationOPERATING MANUAL FOR LF-852DII HOT-AIR S.M.D. REWORK STATION
OPERATING MANUAL FOR LF-852DII HOT-AIR S.M.D. REWORK STATION Thank you for choosing XYTRONIC LF-852DII S.M.D. Rework Station. This tool is specially designed for soldering, desoldering Surface Mount Devices
More informationAIR CONDITIONER OWNER S MANUAL. Please read this manual carefully before operating your set and retain it for future reference.
OWNER S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : WALL MOUNTED P/NO : MFL42262831 www.lg.com ITALIANO ESPAÑOL FRANCAIS
More informationQuick Start Guide LIQ-QSG-Hx338, Rev M July Rosemount Hx338. Steam Sterilizable and Autoclavable ph Sensor
Quick Start Guide LIQ-QSG-Hx338, Rev M July 2017 Rosemount Hx338 Steam Sterilizable and Autoclavable ph Sensor Safety Information WARNING! Do not exceed temperature and pressure limitations of 266 F (130
More informationMoisture Analyzer HB43-S
Moisture Analyzer HB43-S Overview of your HB43-S Halogen Moisture Analyzer 2 1 22 Substance A 12 21 13 14 20 15 19 18 17 16 23 24 25 1 26 30 A Substance A 2:54 88 C 11 8 10 29 28-12.48 % MC 27 7 9 5 31
More informationAPPUZO RANGE HOOD INSTALLATION
IMPORTANT SAFETY INFORMATION TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, PLEASE READ THE FOLLOWING: Use the range hood only in the manner intended by the manufacturer. If you have questions,
More informationInstruction Manual. for. Soldering / SMD Rework Station. For Lead-free soldering application and rework on professional SMD electronics.
Instruction Manual for Soldering / SMD Rework Station LF-16 1680 For Lead-free soldering application and rework on professional SMD electronics. INTRODUCTION Thank you for purchasing Xytronic s soldering
More informationCARE & CLEANING GUIDE. Bathroom & Kitchen Products
CARE & CLEANING GUIDE Bathroom & Kitchen Products TM REGISTER YOUR NEW KRAUS PRODUCT And Let Us Serve You Better Why Should You Register Your New Kraus Product? Are you tired of keeping track of receipts
More informationXOE30 XOE36 READ AND SAVE THE INSTRUCTIONS FOR RESIDENTIAL COOKING ONLY
XOE30 XOE36 READ AND SAVE THE INSTRUCTIONS FOR RESIDENTIAL COOKING ONLY Register your product online at: www.xoventilation.com NEED HELP? Call our ventilation experts at 800-966-8300 1 Dear Customer, If
More informationUltraviolet Systems UV-C 50 INSTALLATION INSTRUCTIONS & PRODUCT MANUAL
Ultraviolet Systems Inc. UV-C 50 INSTALLATION INSTRUCTIONS & PRODUCT MANUAL TABLE OF CONTENTS SECTION 1 General Information 1A. Description...1 1B. Specifications...1 SECTION 2 Installation 2A. Pool Preparation...
More informationDamp Locations Wall & Ceiling Mount BEFORE YOU BEGIN
INSTALLATION AND ASSEMBLY INSTRUCTIONS LXLW LED SERIES Damp Locations Wall & Ceiling Mount SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION BEFORE YOU BEGIN Read these instructions completely
More informationDT/DTH/DR/DRH MERIT SERIES
2001 Lennox Industries Inc. Dallas, Texas 875,010M 05/2001 Supersedes 503,783M 7/99 DT/DTH/DR/DRH MERIT SERIES DIRECT VENT VENTED GAS FIREPLACE/ VENTED GAS FIREPLACE HEATER DT4035 LOUVERED-FACED MODEL
More informationOPERATIONS MANUAL. Hotplate Stirrer/Hotplate/Magnetic Stirrer Model HTS-1003/HTP-1002/MGS Certified
OPERATIONS MANUAL Hotplate Stirrer/Hotplate/Magnetic Stirrer Model HTS-1003/HTP-1002/MGS-1001 Certified Contents 1. Safety 3 2. Introduction 7 3. Package Contents 7 4. Specifications 7 5. Features 8 6.
More informationSafety In Chemistry. Identified Risks and Hazards
Safety In Chemistry ] Introduction Students have a duty of care to minimize and eliminate chemical risk and hazards through proper use of laboratory equipment and to be prudent of potential dangers associated
More informationINSTRUCTION MANUAL FOR
INSTRUCTION MANUAL FOR LF-3000 High Frequency Soldering Station 1 INTRODUCTION Thank you for purchasing Xytronic s high heat capacity soldering station the best solution for your soldering equipment needs
More information15R HARDWARE INSTALLATION GUIDE
15R HARDWARE INSTALLATION GUIDE Table of Contents Section 1 Ratings....................................................................... 3 Section 2 Site Preparation................................................................
More informationCK247 JDW STEAM MOP Instruction Manual
CK247 JDW STEAM MOP Instruction Manual Page 1 of 10 Plug Wiring (UK) This appliance is fitted with a BS1363 13 amp plug. If you have to replace the fuse, only those that are BSI approved to BS1362 and
More informationDEHUMIDIFIER OWNER S MANUAL. Read this manual carefully before operating the appliance and retain it for future reference.
OWNER S MANUAL DEHUMIDIFIER ESPAÑOL FRANÇAIS Read this manual carefully before operating the appliance and retain it for future reference. Model : UD701KOG1 P/NO : MFL68026017 www.lg.com TABLE OF CONTENTS
More informationELECTRIC FIREPLACE HEATER MODEL EF-BLT09 OWNER S MANUAL
ELECTRIC FIREPLACE HEATER MODEL EF-BLT09 OWNER S MANUAL NO VENTILATION REQUIRED PRODUCES SAFE AND EFFICIENT HEAT 110/120-VOLT 60Hz LED BULBS SAVE THESE INSTRUCTIONS FOR FUTURE USE 1 CONSUMER SARETY INSTRUCTIONS
More informationOperating Instruction Manual
Data Support Company P.O Box #261338 Encino, California 91426 Phone: 800-726-5883 Fax: 818-988-7671 www.dsctest.com Operating Instruction Manual HFT-2000F FAT / MOISTURE ANALYZER Table of Contents 1: Table
More informationPPE HAZARD ASSESSMENT CERTIFICATION FORM
PPE HAZARD ASSESSMENT CERTIFICATION FORM Name of Work Place Work Place Address Work Area(s) Assessment Conducted By Date of Assessment Job / Task(s) USE A SEPARATE SHEET FOR EACH JOB, TASK, OR WORK AREA
More informationReacti-Therm I and III Heating Modules
INSTRUCTIONS Reacti-Therm I and III Heating Modules TS-18822 TS-18824 Number TS-18822 TS-18824 Description Reacti-Therm I Heating Module (single block) Reacti-Therm III Heating Module (triple block) 2101.1
More informationUSER MANUAL. Version: 1.0. ROBE Show Lighting s.r.o. Czech Republic
USER MANUAL Version: 1.0 ROBE Show Lighting s.r.o. Czech Republic www.robe.cz Table of contents 1.Introduction 4 2.Cautions 4 3. Unpacking & Inspection 5 4. Setup 5 5. Operation 5 5.1.Control Module Operation
More informationAntari Low Fog Machine
User Manual Antari Low Fog Machine Congratulations on the purchase of your new ANTARI FOG MACHINE. Introduction Thank you for choosing an ANTARI Fog Machine. You now own a rugged and powerful state-of-the-art
More informationOperating manual Electronic Moisture Analyser
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating manual Electronic Moisture Analyser KERN
More informationPLEASE READ THIS MANUAL BEFORE USING YOUR APPLIANCE. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
File name: ARDI Care & Use Manual.pub Last revised: Oct 10th 2008 PLEASE READ THIS MANUAL BEFORE USING YOUR APPLIANCE. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. ASSEMBLER / INSTALLER Leave
More informationOperating manual Electronic Moisture Analyser
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating manual Electronic Moisture Analyser KERN
More informationModel MKFT 115 Dynamic climate chambers for rapid temperature changes with humidity control and extended low temperature range
Model MKFT 115 Dynamic climate chambers for rapid temperature changes with humidity control and extended low temperature range The BINDER MKFT series environmental simulation chamber for low temperature
More informationec Preheater User Manual
ec Preheater DOC.ID: ec 004 999_R02 01 12 2015 www.eurocircuits.com 1 Table of Contents: Application of this device 4 Specifications 5 Declaration of compliance 6 Safety precautions 7 Parts of the device
More informationBUILT-IN OVEN MODEL: EBO-D7080D(SS) Owner s Manual Please read this manual carefully before operating your set. Retain it for future reference.
BUILT-IN OVEN MODEL: EBO-D7080D(SS) Owner s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the
More informationInstruction Manual. for. Intelligent Temperature Controlled Soldering Station LF-2000 (U)
Instruction Manual for Intelligent Temperature Controlled Soldering Station LF-2000 (U) For Lead-free soldering application and rework on professional SMD electronics. 1 INTRODUCTION Thank you for purchasing
More information2 IN 1 CORDLESS VACUUM
2 IN 1 CORDLESS VACUUM MODEL: PLA1452 Instruction Manual Due to ongoing product improvements, specifications and accessories may change without notice. Actual product may differ slightly to that depicted.
More informationKERN MGD Version GB
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating manual Electronic bathroom scales KERN
More informationThe CENTURY. High Performance Oscillating Fan OWNER S GUIDE FOR MODELS 9002X & 9702X
The CENTURY High Performance Oscillating Fan OWNER S GUIDE FOR MODELS 9002X & 9702X 41479-01 01/06/2005 41479-01 Rev 01-06-05.pmd 1 IMPORTANT SAFETY INFORMATION Read & Save These Instructions WARNING To
More informationPORTABLE ISOTOPE IDENTIFIER Search Tool / Sample Counting System
FEATURES: HIGH GAMMA SENSITIVITY MULTI-CHANNEL ANALYZER (MCA) WORKS WITH VARIETY OF PROBES RADIONUCLIDE LIBRARY TAILORED TO CUSTOMER REQUEST SIMULTANEOUSLY MEASURES ; DISPLAYS; ALARMS 1-3 SEPARATE DETECTORS
More informationINSTRUCTION MANUAL KETTLE
INSTRUCTION MANUAL KETTLE PT EL EL SV PT ES NL DE FR EN EN IT Dear Customer, Thank you for purchasing a Smeg 50 s Style kettle. By choosing one of our products, you have selected an appliance which combines
More informationDOUBLE DOOR COMPACT REFRIGERATOR. User Manual MODEL:KSTRC312BW KSTRC312BB
DOUBLE DOOR COMPACT REFRIGERATOR User Manual MODEL:KSTRC312BW KSTRC312BB SERIAL/MODEL # S - IMPORTANT SAFETY INSTRUCTIONS Read and Save These Instructions This Owner s Guide provides specific operating
More informationSEVEN STARS LASER DISPLAY SYSTEM USER MANUAL. Big Dipper Laser Science And Technology Co., Ltd REV: 1.02
LASER DISPLAY SYSTEM USER MANUAL SEVEN STARS Big Dipper Laser Science And Technology Co., Ltd REV: 1.02 Please read this manual carefully before operating LASER DISPLAY SYSTEM USER MANUAL Model:K101B Notices
More information