QUICKSHIP PROGRAM. Twin City Fan QuickShip

Transcription

1 QUICKSHIP PROGRAM

2 QUICKSHIP PROGRAM Twin City Fan & lower stocks a large number of products for quick shipment, so your tight project deadlines can be met and downtime on replacement work can be held to a minimum. Many stock products are ready to ship within 48 hours from our distribution center in South Dakota, and many other products are available in QuickShip times of 5, 10 and 15 days. Contact your local sales representative to see if a specific product has been added to the QuickShip Program. QuickShip Program Features Include: Complete testing of all units prior to shipment to verify operation and ensure quality. Many unit options and accessories in the Twin City Fan QuickShip Program provide wide flexibility. AMCA licensing of most units. UL and/or CSA listing on most stock units to ensure code compliance. Twin City Fan QuickShip Stock A & Definitions 48-HOUR Stock A = Stocked Fan Stock = uild-to-order 2 TWIN CITY FAN - CATALOG 4900

3 CONTENTS Centrifugal Roof & Wall Exhausters Roof Exhaust, Downblast, Direct Drive DCRD... 4 Roof Exhaust, Downblast, elt Driven CRD... 5 Roof Exhaust, Downblast, Endurex, elt Driven CRD-E... 6 Roof Exhaust, Upblast, Direct Drive DCRU... 7 Roof Exhaust, Upblast, Restaurant, Direct Drive DCRUR... 7 Roof Exhaust, Upblast, elt Driven CRU... 8 Roof Exhaust, Upblast, Restaurant, elt Driven CRUR... 8 Roof Exhaust, Upblast, Restaurant, elt Driven, Smoke Control Systems CRUSH... 9 Wall Exhaust, Direct Drive DCRW Wall Exhaust, Direct Drive, Restaurant DCRWR Wall Exhaust, elt Driven CRW Wall Exhaust, elt Driven, Restaurant CRWR Accessories Gravity Relief / Intake Ventilator Gravity Relief/Intake Ventilator GRV Ceiling & Inline Cabinet Ventilators Duct lowers DS Ceiling T Inline Cabinet TL Accessories Square Inline Fans Square Inline Centrifugal, Direct Drive DSI Square Inline Centrifugal, elt Driven SI Accessories Tubular Centrifugal Inline Tubular Centrifugal Inline, elt Driven TCL Tubular Centrifugal Inline, Restaurant, elt Driven TCLR Accessories Propeller Wall Panel Fans Wall Propeller, Light Duty, Direct Drive TCPE Wall Propeller, Medium Duty, Direct Drive WPD Wall Propeller, Light & Medium Duty, elt Driven WP Accessories Propeller Roof Fans Upblast Roof Ventilator, Low Profile, Direct Drive LUD Upblast Roof Ventilator, Low Profile, elt Driven LU Accessories Tubeaxial Roof Fans Upblast Roof Ventilator, Tubeaxial, Direct Drive TUD Upblast Roof Ventilator, Tubeaxial, elt Driven TU Smoke & Heat Roof Ventilator, Tubeaxial, elt Driven TUSH Accessories Tubeaxial Fans Medium Duty, Direct Drive TD Medium Duty, elt Driven T Medium Duty, Smoke & Heat, elt Driven TSH Accessories Utility Sets Utility Sets, ackward Inclined, Airfoil CV/DCV/AV Utility Sets, Forward Curved CVR/CVSH/FCV/DDF Accessories Pressure lowers / Compact & Industrial Fans Cast Aluminum lower, Direct Drive TPD Cast Aluminum lower, elt Driven TP Cast Iron lower, Direct and elt Driven CIW Industrial Radial laded Fan, elt Driven RO/RA Compact Industrial, Direct and elt Driven JRW Accessories Motor Availability Utility Set, Pressure lower, Radial lade

4 DCRD Downblast Roof Exhaust, Centrifugal, Direct Drive Designed specifically for roof mounted applications, exhausting relatively clean air. Fans feature high efficiency, non-overloading, backward inclined centrifugal wheels precisely matched to a deep spun venturi. 8" to 19.75" wheel diameters Airflow to 5,020 CFM Static pressure to 1" w.g. Catalog 4050 Installation and Maintenance Manual - IM-4050 See page 12. C E SQUARE A DIA. 2.00" CUR SIZE HP RPM STOCK ODP 115V TYPE ODP 4, 5 OTHER 5 EC-ODP 115V 6 A C E 48-HOUR 5-DAY 10-DAY 5-DAY 10-DAY 060 1/ A 060E 1/ A / A 070E 1/ A / A 080E 1/ A / A 085E 1/ A / A 090E 1/ A / A 095E 1/ A / A 100 1/ A 1/ A E 1/ A 1/ A 120 1/ A 1/ E 1/ A 1/ A 130 1/ A 1/ E 3/ A 140 1/ A 1/ / A 1/8 860 A / A 1/4 860 A / A 1/ A 1/ All ODP 115V 1Ø motor options are Speed Controllable. 5. Thermal overload motors are exempt from QuickShip. 2. Three Speed Motor RPM (Stock Type A) and ODP 1Ø V, 3Ø and TE motors available on 5-Day ship. 6. Remote mounted speed dial is not available. RPM (Stock Type ) motors available on 48-Hour, 5-Day and 10-Day ship. 4 TWIN CITY FAN - CATALOG 4900

5 CRD Downblast Roof Exhaust, Centrifugal, elt Driven Designed for roof mounted exhaust of relatively clean air in a wide variety of roof exhaust applications. 8.5" to 50.0" wheel diameters Airflow to 28,700 CFM Static pressure to 3.25" w.g. Catalog 4050 Installation and Maintenance Manual - IM-4050 See page 12. C E SQUARE A DIA. 2.00" 2. ODP 1Ø V and 3Ø motors available on 5-Day ship. 3. TEFC, Two-Speed and EXP motors available on 10-Day ship. SIZE HP RPM STOCK ODP 115V ODP RANGE TYPE OTHER 3 A C E 48-HOUR 5-DAY 10-DAY A 070D 1/ A other A D 1/ A other A 085D 1/ A other A 1/ A 100D 1/ A both other A 1/ A 100DHP 1/ A all all 1/ A A 120D 1/ A / A all other 1/ A A 140D 1/ A other A 1/2 all DHP 1/ A A all all 1/ A A 160D 1/ A 1/ A all other 160DHP all all 180D all other 1/ A DHP all all 210D 210DHP all all all all D 240DHP all all all all D 300DHP all all all all D all all 360DHP all all D all all D all all

6 CRD-E Series (Endurex Housing) Downblast Roof Exhaust, Centrifugal, elt Driven ENDUREX HOUSING ADVANTAGES Impact Resistant - Will not dent and is resistant to wind and hail damage. Corrosion Resistant - Will not corrode due to weathering, impervious to salt air and many airborne chemicals. UV resistant material. Reduced Damage in Shipping - Resilient outer shell holds its shape and protects inner components Designed for roof mounted exhaust of relatively clean air in a wide variety of roof exhaust applications. 8.5" to 28" wheel diameters Airflow to 8,700 CFM Static pressure to 3.25" w.g. Catalog 4050 Installation and Maintenance Manual - IM-4050 C E SQUARE A DIA See page 12. SIZE HP RPM STOCK ODP 115V ODP RANGE TYPE Other 3 A C E 48-HOUR 5-DAY 10-DAY A 070D 1/ A other A D 1/ A other A 085D 1/ A other A 1/ A 100D 1/ A both other A 1/ A 100DHP 1/ A all all 1/ A A 120D 1/ A / A all other 1/ A A 140D 1/ A A 1/ A all other 140DHP 1/ A all all 1/ A A 160D 1/ A 1/ A all other 160DHP all all 180D all other 1/ A DHP all all 210D 210DHP all all all all D all all 240DHP all all ODP 1Ø V and 3Ø motors available on 5-Day ship. 3. TEFC, Two-Speed and EXP motors available on 10-Day ship 6 TWIN CITY FAN - CATALOG 4900

7 DCRU / DCRUR Upblast Roof Exhaust, Centrifugal, Direct Drive General Exhaust The DCRU is designed for roof mounted exhaust of relatively clean air in applications where it is desirable to move the exhausted air up and away from the building. Kitchen Exhaust The DCRUR is similar to the DCRU, but is specifically designed for exhausting grease-laden air from kitchens, restaurants, cooking and dishwasher hoods. Model DCRUR is culus 762 listed for the exhaust of grease-laden air. 8.38" to 18.25" wheel diameters Airflow to 3,865 CFM Static pressure to 1.5" w.g. A DIA. Catalog 4105 Installation and Maintenance Manual - IM-4050 See page 12. C 2.00 E SQUARE DCRU DCRUR SIZE HP RPM STOCK STOCK ODP 115V 3, 4 ODP 2, 4 OTHER 4 EC-ODP 115V 5 TYPE TYPE 48-HOUR 5-DAY 10-DAY 5-DAY 10-DAY A C E A 072 1/ A A E 1/ A A 1/ A / A 083E 1/ A A 1/ A / A 093E 1/ A 110 all all 110E 1/ A all all 120E 3/ A all all 140E all all 160E all all 180E ODP 1Ø V and ODP 3Ø , 460V motors available on 5-Day ship. 3. All ODP 115V 1Ø motor options are Speed Controllable. 4. Thermal overload motors are exempt from QuickShip. 5. Remote mounted speed dial is not available. 7

8 CRU / CRUR Upblast Roof Exhaust, Centrifugal, elt Driven General Exhaust The CRU is designed for roof mounted exhaust of relatively clean air in applications where it is desirable to move the exhausted air up and away from the building. Kitchen Exhaust The CRUR is similar to the CRU, but is specifically designed for exhausting grease-laden air from kitchens, restaurants, cooking and dishwasher hoods. Model CRUR is culus 762 listed for the exhaust of grease-laden air. CRU 12.25" to 50.0" wheel diameters CRUR 12.25" to 39.75" wheel diameters A DIA. CRU Airflow to 29,100 CFM Static pressure to 3.25" w.g. CRUR Airflow to 17,400 CFM Static pressure to 3.25" w.g. C E. SQUARE 2.00 Catalog 4105 Installation and Maintenance Manual - IM-4050 See page 12. SIZE HP RPM RANGE CRU STOCK TYPE CRUR STOCK TYPE ODP 115V ODP 2 Other 3 A C E 48-HOUR 5-DAY 10-DAY A 1/ A / A all other A 1/ A / A all other 140 1/ A all other HP all all all all MP all all HP all all all all MP all all HP all all all all HP all all all all HP all all all all HP all all all all HP all all all all all all ODP 1Ø V and ODP 3Ø motors available on 5-Day ship. 3. TEFC, Two-Speed and EXP motors available on 10-Day ship. 4. CRUR is available in sizes 110 through 360 HP. 8 TWIN CITY FAN - CATALOG 4900

9 CRUSH Smoke & Heat Upblast Roof Exhaust, Centrifugal, elt Driven Designed to remove smoke from buildings in the event of a fire. The CRUSH is UL listed for Smoke Control Systems, 500 F for 4 hours and 1000 F for 15 minutes " to 49.21" wheel diameters Airflow to 29,100 CFM Static pressure to 3.25" w.g. Catalog 4105 Installation and Maintenance Manual - IM-4050 See page 12. A DIA. C 2.00 E. SQUARE SIZE HP RPM STOCK ODP 115V ODP RANGE TYPE Other 3 A C E 48-HOUR 5-DAY 10-DAY 110 all all all all all all HP all all all all MP all all HP all all all all MP all all HP all all all all HP all all all all HP all all all all HP all all all all HP all all all all all all ODP 1Ø V and ODP 3Ø motors available on 5-Day ship. 3. TEFC motors available on 10-Day ship 9

10 DCRW / DCRWR Wall Exhaust, Centrifugal, Direct Drive General Exhaust The DCRW is designed for exhaust of relatively clean air in a wall mounted, horizontal application. Kitchen Exhaust The DCRWR is similar to the DCRW, but is specifically designed for exhausting grease-laden air from kitchens, restaurants, cooking and dishwasher hoods. Model DCRWR is culus 762 listed for the exhaust of grease-laden air. 8.38" to 18.25" wheel diameters Airflow to 3,865 CFM Static pressure to 1.5" w.g. DAMPER OPTION DCRW MOUNTING RACKET C Catalog 4105 Installation and Maintenance Manual - IM-4050 WALL OPENING H 4.00 & W/DAMPER E SQUARE A DIA. See page 12. WALL 2.00 SIZE HP RPM STOCK ODP 115V TYPE ODP 2, 4 OTHER 4 EC-ODP 115V 5 A C E H SQ. 48-HOUR 5-DAY 10-DAY 5-DAY 10-DAY / E 1/ / / E 1/ / / E 1/ all all 110E 1/ all all 120E 3/ all all 140E all all 160E all all 180E ODP 1Ø V and ODP 3Ø , 460V motors available on 5-Day ship. 3. All ODP 115V 1Ø motor options are Speed Controllable. 4. Thermal overload motors are exempt from QuickShip. 5. Remote mounted speed dial is not available. 10 TWIN CITY FAN - CATALOG 4900

11 CRW / CRWR Wall Exhaust, Centrifugal, elt Driven General Exhaust The CRW is designed for exhaust of relatively clean air in a wall mounted, horizontal application. Kitchen Exhaust The CRWR is similar to the CRW, but is specifically designed for exhausting grease-laden air from kitchens, restaurants, cooking and dishwasher hoods. Model CRWR is culus 762 listed for the exhaust of grease-laden air " to 31.75" wheel diameters Airflow to 11,600 CFM Static pressure to 3.25" w.g. Catalog 4105 Installation and Maintenance Manual - IM-4050 DAMPER OPTION CRW MOUNTING RACKET C See page 12. WALL OPENING H 4.00 & W/DAMPER E SQUARE A DIA. WALL 2.00 SIZE HP STOCK ODP 115V ODP TYPE Other 3 A C E H SQ. 48-HOUR 5-DAY 10-DAY 110 all all all HP all all MP all HP all all MP all HP all all HP all all HP all all HP all ODP 1Ø V and ODP 3Ø motors available on 5-Day ship. 3. TEFC, Two-Speed and EXP motors available on 10-Day ship. 11

12 Accessories Centrifugal Roof & Wall Exhausters Models DCRD, CRD, CRD-E, DCRU/DCRUR, CRU/CRUR, CRUSH, DCRW/DCRWR, CRW/CRWR 1. Availability is in working days. 2. Roof Curbs will ship with fan(s) on QuickShip Program. 3. Shipped loose for field mount. 4. Curb hinge is for use with canted curbs only. (Will work with self-flashing CRUR, CRUSH and DCRUR curbs.) DCRD, CRD, CRD-E, DCRU, CRU FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY 8" Galv. Canted 12" Galv. Canted 18" Galv. Canted Roof Curbs 2 8" Galv. Self Flashing 12" Galv. Self Flashing 18" Galv. Self Flashing Aluminum, any Style/Ht ackdraft Gravity Dampers Motorized Aluminum Nameplate Curb Hinge 4 Retaining Chain Security Hasp Speed Control (for direct drive fans only) 3 NEMA 4 Disconnect Switch 3 Stainless Steel Shaft Two-Speed Switch 3 (for belt drive fans only) Firestat 3 Aluminum irdscreen Insect Screen (Aluminum) Enamel, Air-dried (Gray) Coatings Epoxy, Air-dried (lack) Phenolic Heresite, Air-dried (Gray) DCRUR, CRUR, CRUSH FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY Roof 12" Galv. SF, Vented Curbs 2 18" Galv. SF, Vented Grease ox & Drain Aluminum Nameplate Curb Hinge Retaining Chain Security Hasp Speed Control (for direct drive fans only) 3 NEMA 4 Disconnect Switch 3 Stainless Steel Shaft Two-Speed Switch 3 (for belt drive fans only) Firestat 3 Enamel, Air-dried (Gray) Coatings Epoxy, Air-dried (lack) Phenolic Heresite, Air-dried (Gray) DCRW, CRW FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY ackdraft Gravity Dampers Motorized Aluminum Nameplate Speed Control (for direct drive fans only) 3 NEMA 4 Disconnect Switch 3 Stainless Steel Shaft Two-Speed Switch 3 (for belt drive fans only) Firestat 3 Insect Screen Enamel, Air-dried (Gray) Coatings Epoxy, Air-dried (lack) Phenolic Heresite, Air-dried (Gray) DCRWR, CRWR FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY Aluminum Nameplate Speed Control (for direct drive fans only) 3 NEMA 4 Disconnect Switch 3 Stainless Steel Shaft Firestat 3 Enamel, Air-dried (Gray) Coatings Epoxy, Air-dried (lack) Phenolic Heresite, Air-dried (Gray) 12 TWIN CITY FAN - CATALOG 4900

13 GRV Gravity Relief / Intake Ventilator Low silhouette spun aluminum gravity ventilator designed to match the appearance of spun aluminum power roof ventilators. Provides natural gravity ventilation and may also be used as an intake if sized properly. 9" to 48.3" square throat sizes Relief Airflow to 25,100 CFM Intake Airflow to 23,000 CFM Static pressure to 0.375" w.g. Catalog 4700 Installation and Maintenance Manual - IM-4700 A Dia. E Square SIZE STOCK TYPE 48-HOUR 5-DAY 10-DAY A E 090 A A A A A A A Roof curbs will ship with ventilator(s) on QuickShip Program. 3. For intake units, a minimum curb height of 12" is recommended. 4. Curb hinge for use with canted curbs only. FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 8" Galv. Canted 12" Galv. Canted Roof Curbs 2, 3 8" Self Flashing 12" Self Flashing Aluminum, any Style/Ht ackdraft Dampers Gravity Mortorized Curb Hinge 4 Aluminum irdscreen Insect Screen (aluminum) 13

14 DS Forward Curved Inline Duct lowers X 0.53 Specifically designed for duct applications handling relatively clean air, including supply, exhaust and return air systems. These fans offer high efficiency and quiet operation in a compact design that can be mounted in bottom horizontal or top horizontal positions. Duct collars are provided for easy mounting connections. 8" to 20" wheel diameters Airflow to 18,500 CFM Static pressure to 3.5" w.g. Catalog 4220 Installation and Maintenance Manual - IM-4220 D SQ. E See page 16. MOUNTING RACKETS MAY E MOUNTED ON TOP OR OTTOM OF FAN 1.50 A F K C SIZE HP ODP 2 Other 3 48-HOUR 5-DAY 10-DAY A C D SQ. E F K 080 all all all all all all all all ODP motors available on 5-Day ship. 3. TEFC available on 10-Day ship. 14 TWIN CITY FAN - CATALOG 4900

15 T / TL Ceiling (T) & Inline Cabinet (TL) Ventilators Designed for commercial applications requiring quiet, continuous, reliable operation. Exhausters are constructed with a low profile grille and are easy to duct horizontally, vertically, or inline, with many models offering round duct connectors as standard. Model T050 T Airflow to 1,590 CFM Static pressure to 1" w.g. TL Airflow to 3,868 CFM Static pressure to 1" w.g. Catalog 4600 Installation and Maintenance Manuals on website per size. A See page 16. C SIZE P/N STOCK DUCT ODP TYPE A C CONNECT0R 48-HOUR 5-DAY 10-DAY T A T A T A T A 6.00 T A T A 8.00 T A T A T A x T A T A T A x T100L A T150L A 6.00 T200L A T250L A 8.00 T300L A T400L A T500L A x T700L A T900L A T1500L A x T2000L x T3500EXL x All motors are ODP 115V 1Ø, except T3500EXL (240V 1Ø). 15

16 Accessories Ceiling (T) & Inline Cabinet (TL) Ventilators & (DS) Duct lowers Speed Control 2 T and TL FAN ACCESSORY 48-HOUR 5-DAY 10-DAY Remote Mount, 120V, 6A Remote Mount, 240V, 6A (T3500EXL) Remote Mount, 120V, 3A Unit Mounted, 120V, 3A 3 Switch On/Off 2 Timer, 15-Minute 2 Timer, 60-Minute 2 Fan/Light Control, w/ Off-Delay 2 Vibration Isolators Damper 4 (T2000L and T3500EXL only) Metal Grille 5 (T fans only) Inline Adapter Transition (SQ to RD) Sloped, Steel Roof Cap Sloped, Alum Flat, Alum, Flashed Flat, Alum, Curb Mounted 8" Aluminum Self-Flashing Roof Curb 6 12" Aluminum Self-Flashing Wall Cap Aluminum Steel, w/ Aluminum Louvers Radiation Damper 7 (T fans only) 2. Shipped loose for remote field mount. 3. Unit mounted speed control available for sizes T & TL Dampers are standard for all fans except T2000 and T3500EXL. 5. Metal Grills are standard for sizes T400 - T For use with flat curb-mounted roof caps. 7. Radiation Dampers are for use with T fans only (not TL). Model T081 Model T100L DS FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY 2 NEMA 1 Disconnect Switch 2 NEMA 3R Disconnect Switch 2 NEMA 4 Disconnect Switch THD Discharge Inlet Screen Insulated Housing (Neoprene) ackdraft Dampers Gravity Motorized Aluminum Nameplate Two-Speed Switch 2 Stainless Steel Hardware 3 Vibration Isolators Weather Hood Filter ox Filter ox, Painted Enamel, Air-dried (Gray) Coatings Epoxy, Air-dried (lack) Phenolic Heresite, A/d (Gray) Model DS 2. Shipped loose for field mounting. 3. Exterior hardware only. 16 TWIN CITY FAN - CATALOG 4900

17 DSI Square Inline Centrifugal, Direct Drive Specifically designed for duct applications handling relatively clean air, including supply, exhaust and return air systems. DSI fans offer high efficiency and quiet operation in a compact design that can be mounted in any position (horizontal, vertical or angular). Duct collars are provided for easy mounting without the need for square to round duct transitions. 10.5" to 18.25" wheel diameters Airflow to 5,900 CFM Static pressure to 2" w.g. Catalog 4205 Installation and Maintenance Manual - IM-4205 See page 20. AIRFLOW D A D C SQ. DUCT COLLAR SQ. SIZE HP RPM ODP 115V 4 ODP 2, 4 Other 3, 4 EC-ODP 115V 5 48-HOUR 5-DAY 10-DAY 5-DAY 10-DAY A C D 080A all all 080AE 1/ A all all 090AE 1/ A all all 100AE 1/ A all all 120AE 3/ A all all 135AE 3/ AN all all ANE A all all 150AE AN all all ANE A all all 165AE AN all all ANE ODP 115V/ motors available on 5-Day ship. 3. TE and EXP motors available on 10-Day ship. 4. Thermal overload motors are exempt from QuickShip. 5. Remote mounted speed dial is not available. 17

18 SI Square Inline Centrifugal, elt Driven Specifically designed for duct applications handling relatively clean air, including supply, exhaust and return air systems. SI fans offer high efficiency and quiet operation in a compact design that can be mounted in any position (horizontal, vertical or angular). Duct collars are provided for easy mounting without the need for square to round duct transitions. 10.5" to 44.5" wheel diameters Airflow to 27,400 CFM Static pressure to 3.5" w.g. AIRFLOW Catalog 4205 Installation and Maintenance Manual - IM-4205 See page 20. D A D C SQ. DUCT COLLAR SQ. 2. ODP motors available on 5-Day ship. 3. TEFC, Two-Speed and EXP motors available on 10-Day ship. 4. Fan sizes marked with an I (080AI) designate units with neoprene insulation. 5. Thermal overload motors are exempt from QuickShip. 6. ODP 1Ø motors 115V and 230V available on 5-Day ship. SIZE HP ODP 2 Other 3 48-HOUR 5-DAY 10-DAY A C D 080A all 080AI 4 all A all 090AI 4 all A all 100AI 4 all A all 120AI 4 all AHP all 135A all 135AI 4 all AHP all 150A all 150AI 4 all AHP all 165A all 165AHP all A all 180AHP all A all 210AHP all A all 225AHP all A all 245AHP all A all 270AHP all A all 300AHP all A all 330AHP all A all 365AHP all A all 402AHP all TWIN CITY FAN - CATALOG 4900

19 TCL / TCLR Tubular Centrifugal Inline Fan, Medium Duty, elt Driven General Exhaust Specifically designed for cost effective, reliable air movement in commercial and light industrial ducted medium pressure applications. The backward inclined fan wheel provides higher efficiencies and lower sound levels than axial type fans. Kitchen Exhaust Designed to exhaust grease-laden air from kitchens, restaurants, and cooking and dishwasher hoods. Model TCLR is CULUS 762 listed for the exhaust of grease-laden air. 10.5" to 49" wheel diameters Airflow to 41,700 CFM Static pressure to 4" w.g. Catalog 4215 Installation and Maintenance Manual ES-895 See page 20. AIR FLOW D MOTOR/ELT GUARD (OPTIONAL) E MAX F A C SIZE/ LEVEL HP 5-DAY 10-DAY 15-DAY A C D E F 90A1 1/4-3/4 90A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 1/ A2 1/ A1 3/ A2 3/ A1 3/ A2 3/ A A A A Availability is in working days. 19

20 Accessories Square Inline Centrifugal Fans (DSI & SI) DSI, SI FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-Day elt Guard (SI) Motor Cover (SI) Side Discharge Inlet/Outlet Guard Extended Lubrication Lines (SI) Insulated Housing (Neoprene) 2 ackdraft Dampers Gravity Motorized Aluminum Construction AMCA Spark (SI) Aluminum Namplate Speed Control (DSI) 3 Stainless Steel Shaft Two-Speed Switch 3 Vibration Isolators Filter ox Filter ox, Painted Coatings 4 Epoxy Air-dried (lack) Enamel, Air-dried (Gray) 5 Phenolic Heresite, A/d (Gray) 2. Shipped loose for field mount. 3. Coatings are for steel fans only. 4. Exterior only. Model SI Model DSI Accessories Tubular Centrifugal Inline Fans (TCL and TCLR) TCL FAN ACCESSORY 5-DAY 10-DAY 15-Day NEMA 1 Disconnect Switch 2 NEMA 3R Disconnect Switch 2 NEMA 4 Disconnect Switch 2 NEMA 7/9 Disconnect Switch 2 Access Door olted Hinged elt Guard Motor Cover Inlet and/or Outlet Guard Flange, Companion Type '' Spark Resistant Construction 3 Stainless Steel Shaft Aluminum Construction Inspection Section, Inlet or Outlet Vibration Isolators Drain - Standard or Standard w/plug Extended Lube Lines - Copper 4 Nameplate - Aluminum or Stainless Steel Enamel, Air-dried (Gray) STANDARD Coatings Epoxy Air-dried (lack) Phenolic Heresite, A/d (Gray) Model TCL 2. Shipped loose for field mount. 3. Includes aluminum bearing cover and aluminum wheel (standard up to size 270). 4. Polyethylene lube lines are standard. 20 TWIN CITY FAN - CATALOG 4900

21 TCPE Propeller Wall Panel Fan, Light Duty, Direct Drive Designed for low static pressures and can be mounted in a wall vertically or in a ceiling horizontally. 8" to 24" wheel diameters Airflow to 7,615 CFM Static pressure to 0.625" w.g. Catalog 4800 Installation and Maintenance Manual - IM-4800 See page 25. AIR FLOW I.D. A SQ. (INSIDE) 2.00 C SIZE HP RPM ODP 2, 5, 6 Other 3, 6 EC-ODP 115V 7 48-HOUR 5-DAY 10-DAY 5-DAY 10-DAY A C 080A A 1/ A AE 1/ A A 1/ A AE 1/ A A 1/ A AE 1/ A 1/ A 1/ A 1/ AE 1/ A 1/ A 1/ A 1/ AE 3/ A 1/ A 1/ A 3/ AE 3/ A 1/ A 1/ A 3/ AE 3/ A 1/ A 1/ A Availability is in working days, exhaust configuration only. Contact factory for supply configuration availability. 2. ODP motors available on 5-Day ship. 3. TE motors available on 10-Day ship. 4. Three speed motor. 5. All ODP 115V 1Ø motor options are Speed Controllable. 6. Thermal overload motors are exempt from QuickShip. 7. Remote mounted speed dial is not available. 21

22 WPD Propeller Wall Fan, Medium Duty, Direct Drive Specifically designed for cost effective, generalpurpose ventilation. Available in either exhaust or supply configurations. The galvanized steel panel design is available with cast aluminum 3 or fabricated steel 4 propellers to meet specific application requirements. 14" to 48" wheel diameters Airflow to 35,300 CFM Static pressure to 1" w.g. C SQ. OUTSIDE D MAX Catalog 4820 Installation and Maintenance Manual - IM-4800 ES-404 (Type E Adjustable Pitch Propeller) AIR FLOW A DIA. See page Exhaust Airflow SIZE HP RPM ODP Other 2 Z-Prop 5 48-HOUR 5-DAY 10-DAY 15-DAY A 6 C 6 D MAX. 14E4 1/4, 1/ E8 1/4, 1/ E4 1/4-1/ E8 1/3, 1/ E4 1/3-3/ E8 1/2, 3/ E4 1/2-1 1/ E8 3/4-1 1/ E4 1/ E Z5 1/ , 1160, E4 3/ E Z5 1/ , E E Z5 1 1/ , E4 1 1/2-5 42E Z5 3, 5 48E E8 3, Z Speed, TEFC and EXP motors available on 10-Day ship. 3. E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). 4. Z propeller is fabricated steel, fixed pitch (5-bladed). 5. Z props available on 15-Day ship. - (no special coatings) 6. Exhaust fan dimensions shown. 22 TWIN CITY FAN - CATALOG 4900

23 WP Propeller Wall Panel Fan, Light & Medium Duty, elt Driven Specifically designed for cost effective, generalpurpose ventilation. Available in either exhaust or supply configurations. The galvanized steel panel design is available with cast aluminum 3 or fabricated steel 4 propellers to meet specific application requirements. 14" to 48" wheel diameters Airflow to 35,300 CFM Static pressure to 1" w.g. C SQ. OUTSIDE D MAX Size L1, L2 & L Catalog 4820 Installation and Maintenance Manual - IM-4800 ES-404 (Type E Adjustable Pitch Propeller) AIR FLOW 2.00 A DIA. Exhaust Airflow See page 25. C SQ. OUTSIDE D MAX Size L AIR FLOW A DIA Exhaust Airflow SIZE HP ODP Other 48-HOUR C/Z-Prop 5 5-DAY 10-DAY 15-DAY A C D MAX. 21L1 1/4-1/ L2 1/2, 3/ E4 1/4-3/ E8 1/4-3/4 24L1 1/4-3/4 24L2 1/ E4 1/3-1 1/ E8 1/ Z5 1/3-1 1/2 30L1 1/ L2 3/ E4 1/ E8 1/ Z5 1/2-5 36L1 1/ L E4 3/ E8 3/ Z5 3/4-5 42L1 1/ L E / E Z /2 48L1 1/ L2 1 1/ E4 1 1/ E8 1 1/ Z5 1 1/ Speed, TEFC and EXP motors available on 10-Day ship. 3. E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). 'C' propeller is die cast aluminum, adjustable pitch (4- or 6-bladed). 4. Z propeller is fabricated steel, fixed pitch (5-bladed). 5. 'C' and Z props available on 15-Day ship. - (no special coatings) 6. Exhaust fan dimensions shown. 23

24 WP (cont.) Propeller Wall Fan, Light & Medium Duty, elt Driven Specifically designed for cost effective, generalpurpose ventilation. Available in either exhaust or supply configurations. The galvanized steel panel design is available with standard or reinforced galvanized, cast aluminum 3 or fabricated steel 4 propellers to meet specific applications requirements. 21" to 60" wheel diameters C SQ. OUTSIDE Size L D MAX Airflow to 62,800 CFM Static pressure to 1" w.g. AIR FLOW 2.00 A DIA. Exhaust Airflow Catalog 4820 Installation and Maintenance Manual - IM-4800 ES-404 (Type E Adjustable Pitch Propeller) See page 25. Size L1, L2 & L C SQ. OUTSIDE D MAX AIR FLOW A DIA Exhaust Airflow SIZE HP ODP Other 48-HOUR C/Z-Prop 5 5-DAY 10-DAY 15-DAY A C D MAX. 54L1 3/4-1 1/ L2 1 1/ C3 1 1/ C6 1 1/ Z5 1 1/ L1 3/ L2 1 1/ C C Z Speed, TEFC and EXP motors available on 10-Day ship. 3. E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). 'C' propeller is die cast aluminum, adjustable pitch (4- or 6-bladed). 4. Z propeller is fabricated steel, fixed pitch (5-bladed). 5. 'C' and Z props available on 15-Day ship. - (no special coatings) 6. Exhaust fan dimensions shown. 24 TWIN CITY FAN - CATALOG 4900

25 Accessories Propeller Wall Fans (TCPE, WPD & WP) Model TCPE Model WPD Model WP FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY Speed Control 2 (TCPE only) NEMA 1 Disconnect Switch 2 NEMA 3R Disconnect Switch 2 (WP, WPD only) NEMA 7/9 Disconnect Switch 2 (WP, WPD only) ackdraft Dampers Gravity Motorized Damper Guard Wall ox w/ Guard (WP, WPD) Wall Collar OSHA Motor Side Guard (WP, WPD) Weatherhood Stainless Steel Shaft Filter ox (WP, WPD) Filter ox, Painted (WP, WPD) Supply Fan Configuration (WP, WPD) Enamel, Air-dried (Gray) Coatings Epoxy, Air-dried (lack) 3 Phenolic Heresite, Air-dried (Gray) 3 2. Shipped loose for field mount. 3. Not available on Z propellers. 25

26 LUD Low Profile Upblast Propeller Roof Ventilator, Direct Drive Low profile upblast roof ventilators provide cost effective, general-purpose ventilation of commercial buildings, with a pleasing low profile design that minimizes extension above the roof line. Available with cast aluminum 2 or fabricated steel 3 propellers to meet specific application requirements. 14" to 48" wheel diameters Airflow to 31,400 CFM Static pressure to 1" w.g. A Catalog 4870 Installation and Maintenance Manual - IM-4870 See page E SQ. INSIDE SIZE HP RPM Z-Prop 4 5-DAY 10-DAY 15-DAY A E 14E4 1/4, 1/ E8 1/4, 1/ E4 1/4-1/ E8 1/3, 1/ E4 1/3-3/ E8 1/2, 3/ E4 1/2-1 1/ E8 3/4-1 1/ E4 1/ E Z5 1/ , 1160, E4 3/ E Z5 1/ , E E8 2, Z5 1 1/ , E4 1 1/2-5 42E Z5 3, 5 48E E8 3, Z E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). 3. Z propeller is fabricated steel, fixed pitch (5-bladed). 4. Z props available on 15-Day ship. 26 TWIN CITY FAN - CATALOG 4900

27 LU Low Profile Upblast Propeller Roof Ventilator, elt Driven Low profile upblast roof ventilators provide cost effective, general purpose ventilation of commercial buildings, with a pleasing low profile design that minimizes extension above the roof line. Available with cast aluminum 2 or fabricated steel 3 propellers to meet specific application requirements. 21" to 60" wheel diameters Airflow to 60,800 CFM Static pressure to 1" w.g. A Catalog 4870 Installation and Maintenance Manual - IM-4870 See page E SQ. INSIDE SIZE HP ODP Other 48-HOUR C/Z-Prop 5 5-DAY 10-DAY 15-DAY A E 21L1 1/4-1/2 21L2 1/2, 3/4 21E4 1/4-3/ E8 1/4-3/4 24L1 1/4-3/4 24L2 1/2-1 24E4 1/3-1 1/ E8 1/3-1 24Z5 1/3-1 1/2 30L1 1/4-1 30L2 3/4-2 30E4 1/ E8 1/2-2 30Z5 1/2-5 36L1 1/3-1 36L E4 3/ E8 3/4-3 36Z5 3/4-5 42L1 1/3-1 42L E / E Z /2 48L1 1/2-1 48L2 1 1/2-5 48E4 1 1/ E8 1 1/2-5 48Z5 1 1/ E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). 3. Z propeller is fabricated steel, fixed pitch (5-bladed). 4. C and Z props available on 15-Day ship. 27

28 LU (cont.) Low Profile Upblast Propeller Roof Ventilator, elt Driven Low profile upblast roof ventilators provide cost effective, general purpose ventilation of commercial buildings, with a pleasing low profile design that minimizes extension above the roof line. Available with cast aluminum 2 or fabricated steel 3 propellers to meet specific application requirements. 21" to 60" wheel diameters Airflow to 60,800 CFM Static pressure to 1" w.g. A Catalog 4870 Installation and Maintenance Manual - IM-4870 See page E SQ. INSIDE SIZE HP ODP Other 48-HOUR C/Z-Prop 5 5-DAY 10-DAY 15-DAY A E 54L1 3/4-1 1/2 54L2 1 1/2-5 54C3 1 1/ C6 1 1/ Z5 1 1/ L1 3/4-2 60L2 1 1/2-5 60C C Z E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). 3. Z propeller is fabricated steel, fixed pitch (5-bladed). 4. C and Z props available on 15-Day ship. 28 TWIN CITY FAN - CATALOG 4900

29 TUD Upblast Tubeaxial Roof Ventilator, Direct Drive Tubeaxial roof ventilators provide cost effective, generalpurpose ventilation of commercial buildings. 14" to 48" wheel diameters Airflow to 39,100 CFM Static pressure to 1.5" w.g. Catalog 4850 Installation and Maintenance Manual - ES-404 (Type E Adjustable Pitch Propeller) See page 35. D (I.D.) STACK CAP WITH WINDAND AND DAMPER A MAX. AIRFLOW C 8.00 E SQ. (INSIDE) SIZE HP RPM 48-HOUR 5-DAY 10-DAY 15-DAY A C D E 14E4 1/4, 1/3 1725, E8 1/4-1/ E4 1/4-1/2 1725, E8 1/4-3/ E4 1/4-3/4 1725, E8 1/ E4 1/4-1 1/2 1725, E8 1/4-1 1/ E4 1/ , 1160, E8 1/ E4 1/ , 1160, E8 1/ E4 1/ ,1160, E8 3/ E4 1 1/ , E E , E

30 TU Upblast Tubeaxial Roof Ventilator, elt Driven D (I.D.) STACK CAP WITH WINDAND AND DAMPER Tubeaxial roof ventilators provide cost effective, generalpurpose ventilation of commercial buildings. 14" to 60" wheel diameters Airflow to 72,400 CFM Static pressure to 1.5" w.g. Catalog 4850 Installation and Maintenance Manual - ES-404 (Type E Adjustable Pitch Propeller) See page 35. AIRFLOW C A MAX. MOTOR & DRIVE COVER 8.00 E SQ. (INSIDE) SIZE HP C/Z-Prop 2 48-HOUR 5-DAY 10-DAY 15-DAY A C D E 14E4 1/4-3/4 14E8 1/4-3/ E4 1/4-1 16E8 1/ E4 1/4-1 1/2 18E8 1/4-1 1/ E4 1/4-2 21E8 1/ E4 1/3-3 24E8 1/ Z5 1/3-3 30E4 1/2-5 30E8 1/ Z5 1/2-5 36E4 3/4-7 1/2 36E8 3/4-7 1/ Z5 3/4-7 1/2 42E E Z E4 1 1/ E8 1 1/ Z5 1 1/ C3 1 1/ C6 1 1/ Z5 1 1/ C C Z C and Z props available on 15-Day ship. 30 TWIN CITY FAN - CATALOG 4900

31 TUSH Smoke & Heat Removal Roof Ventilator, elt Driven Designed to remove smoke from buildings in the event of a fire. The unit features fusible link damper lifters which allow dampers to open when the fusible links melt at 165 F. The TUSH is designed to meet the time/ temperature standards (500 F for 4 hours, 1000 F for 15 minutes) and snow load test for dampers set forth by UL, IRI, and SCCI. A fabricated steel propeller is standard. 24" to 60" wheel diameters Airflow to 70,700 CFM Static pressure to 1.5" w.g. Catalog 4850 See page 35. D (I.D.) STACK CAP WITH WINDAND AND DAMPER AIRFLOW C A MAX. MOTOR & DRIVE COVER 8.00 E SQ. (INSIDE) SIZE HP 48-HOUR 5-DAY 10-DAY 15-DAY A C D E 24Z5 1/ Z5 1/ Z5 3/4-7 1/ Z Z5 1 1/ Z5 1 1/ Z

32 TD Tubeaxial Fan, Direct Drive AIRFLOW (.C.) A C (O.D.) (I.D.) Specifically designed for cost effective, reliable air movement in commercial and light industrial ducted and non-ducted applications. Available with cast aluminum or fabricated steel propellers to meet specific application requirements. 14" to 48" wheel diameters Airflow to 42,900 CFM Static pressure to 1.5" w.g. Catalog 4830 Installation and Maintenance Manual - ES-191, ES-404 (Type E Adjustable Pitch Propeller) See page 35. L SIZE HP RPM 48-HOUR 5-DAY 10-DAY 15-DAY A C L 14E4 1/4, 1/3 1725, E8 1/4-1/2 1725, E4 1/4-1/2 1725, E8 1/4-3/4 1725, E4 1/4-3/4 1725, E8 1/ , E4 1/4-1 1/2 1725, E8 1/4-1 1/2 1725, E4 1/ , 1160, E8 1/ , 1160, E4 1/ , 1160, E8 1/ , 1160, E4 1/ , 1160, E8 3/ , 1160, E4 1 1/ , E , E , E , TWIN CITY FAN - CATALOG 4900

33 T Tubeaxial Fan, elt Driven Specifically designed for cost effective, reliable air movement in commercial and light industrial ducted and non-ducted applications. Available with cast aluminum 3 or fabricated steel 4 propellers to meet specific application requirements. 14" to 60" wheel diameters Airflow to 82,600 CFM Static pressure to 1.5" w.g. Catalog 4830 Installation and Maintenance Manual - ES-191, ES-404 (Type E Adjustable Pitch Propeller) See page 35. AIRFLOW A (O.D.) (.C.) C (I.D.) L SIZE HP C/Z-Prop 2 48-HOUR 5-DAY 10-DAY 15-DAY A C L 14E4 1/4-3/4 14E8 1/4-3/ E4 1/4-1 16E8 1/ E4 1/4-1 1/2 18E8 1/4-1 1/ E4 1/4-2 21E8 1/ E4 1/3-3 24E8 1/ Z5 1/3-3 30E4 1/2-5 30E8 1/ Z5 1/2-5 36E4 3/4-7 1/2 36E8 3/4-7 1/ Z5 3/4-7 1/2 42E E Z E4 1 1/ E8 1 1/ Z5 1 1/ C3 1 1/ C6 1 1/ Z5 1 1/ C C Z Availability is in working days. pitch (5-bladed). 2. C and Z props available on 15-Day ship. 3. E propeller is die cast aluminum, adjustable pitch (4- or 8-bladed). C propeller is cast aluminum, adjustable pitch (4- or 6-bladed). 4. Z propeller is fabricated steel, fixed 33

34 TSH Smoke & Heat Removal Tubeaxial Fan, elt Driven AIRFLOW A (O.D.) (.C.) C (I.D.) Designed to remove smoke in the event of a fire. The TSH is designed to meet time/temperature standards (500 F for 4 hours, 1,000 F for 15 minutes) set forth by UL, IRL, and SCCI. A fabricated steel propeller is standard. 24" to 60" wheel diameters Airflow to 82,600 CFM Static pressure to 1.25" Catalog 4830 Installation and Maintenance Manual - ES-191 See page 35. L SIZE HP 48-HOUR 5-DAY 10-DAY 15-DAY A C L 24Z5 1/ Z5 1/ Z5 3/4-7 1/ Z Z5 1 1/ Z5 1 1/ Z TWIN CITY FAN - CATALOG 4900

35 Accessories Low Profile Upblast Propeller Roof Ventilator - Models LUD and LU Upblast Tubeaxial Roof Ventilator - Models TUD, TU and TUSH Tubeaxial Fans - Models TD, T and TSH LUD and LU FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY Inlet Safety Guard, asket Type Fusible Link Assembly Magnetic Damper Latches Extended Lubrication Lines (LU only) Hinged ase (available thru size 36 only) Roof Curb, 12" Galv. NEMA 3R Disconnect Switch 2 NEMA 7/9 Disconnect Switch 2 irdscreen Tie Down rackets TUD, TU and TUSH FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY Fusible Link Assembly (Std. on TUSH) Magnetic Damper Latches (TUD, TU only) Access Door Shaft Seal (TU only) Spark Resistant Construction, Type 3 Roof Curb, 12 Galv. NEMA 1 Disconnect Switch 2 NEMA 3R Disconnect Switch 2 NEMA 7/9 Disconnect Switch 2 TD, T and TSH FAN ACCESSORY 48-HOUR 5-DAY 10-DAY 15-DAY Mounting rackets elt Guard Inlet/Outlet Screen Inlet ell Inlet/Outlet Companion Flange Access Door Vibration Isolators Shaft Seal (T only) Spark Resistant Construction, Type 2 NEMA 1 Disconnect Switch 3 NEMA 3R Disconnect Switch 3 NEMA 7/9 Disconnect Switch 3 2. Spark Resistant Construction available on T and TU fans with E and C propellers only. 3. Shipped loose for field mount. 35

36 Utility Sets CV (ackward Inclined), DCV (ackward Inclined), AV (Airfoil) Model CV Specifically designed to supply and exhaust air in hospitals, hotels, schools, fume hoods, etc. Three wheel types are available: backward inclined (CV), backward inclined (DCV) and airfoil (AV). 10.5" to 60" wheel diameters CV Airflow to 78,600 CFM Static pressure to 8" w.g. AV Airflow to 32,100 CFM Static pressure to 8" w.g. DCV Airflow to 8,200 CFM Static pressure to 2.5" w.g. Model DCV Catalog 600 Installation, Operation and Maintenance Manual - ES-52 Installation and Maintenance Manual - IM-4055 (DCV) See page 38. Drawings I/FC/AF Wheel, elt Driven CV - ackward Inclined Utility Set FCV - Forward Curved Utility Set DDF - Forward Curved Utility Set AV - Airfoil Utility Set DCV - Direct Drive ackward Inclined Utility Set SIZE CLASS HP ODP/TEFC 5-DAY 10-DAY 60 I all 75 I all 90 L all I all 105 L all I all L all 122 I all II all L all 135 I all II all L all 150 I all II all L all 165 I all II all L all 182 I all II all L all 200 I all II all L all 222 I all II all CV - ackward Inclined Utility Set FCV - Forward Curved Utility Set DDF - Forward Curved Utility Set AV - Airfoil Utility Set DCV - Direct Drive ackward Inclined Utility Set SIZE CLASS HP ODP/TEFC 5-DAY 10-DAY L all 245 I all II all L all 270 I all II all 300 I all II all 330 I all II all 365 I all II all 2. These fans are not freight allowed. 36 TWIN CITY FAN - CATALOG 4900

37 Utility Sets CVR, CVSH (ackward Inclined); FCV, DDF (Forward Curved) These small fans are used for general exhaust of washrooms, exhaust of hoods, restaurant counters and a number of other applications where space is limited. 6" to 60" wheel diameters CVR Airflow to 29,100 CFM Static pressure to 8 w.g. CVSH Airflow to 78,660 CFM Static pressure to 8 w.g. FCV Airflow to 29,100 CFM Static pressure to 5" w.g. DDF Airflow to 2,100 CFM Static pressure to 1.75" w.g. Model FCV Catalog 600 Installation, Operation and Maintenance Manual - ES-52 See page 38. Drawings UL 705/UL 762/Smoke & Heat - I Wheel Class 1, elt Driven CV - ackward Inclined Utility Set, UL 705 CVR - ackward Inclined Utility Set, UL 762 CVSH - ackward Inclined Utility Set, UL Smoke & Heat SIZE UL TYPE HP ODP/TEFC 5-DAY 10-DAY 105 U5/U2 all 122 U5/U2/SH all 135 U5/U2/SH all 150 U5/U2/SH all 165 U5/U2/SH all 182 U5/U2/SH all 200 U5/U2/SH all 222 U5/U2/SH all 245 U5/U2/SH all 270 U5/U2/SH all 300 U5/U2/SH all 330 U5/U2/SH all 365 U5/U2/SH all Model DDF 2. These fans are not freight allowed. 37

38 Accessories Utility Sets (CV, DCV, FCV, AV, DDF) CV, DCV, CVR, CVSH, FCV, AV, DDF FAN ACCESSORY 5-DAY 10-DAY Access Door - olted Access Door - Quick Opening elt Guard - Std Type Weather Cover (OSHA elt Guard) Drain Connection Inlet Flange Outlet Flange Inlet Screen Outlet Screen Shaft Seal AMCA Spark Construction AMCA Spark C Construction High Temp Construction, F (CV, FCV only) High Temp Construction, F 2 (CV, FCV only) Gravity Shutter - Std Duty Vibration Isolators, Pads or Hangers Vibration Isolators, Rails NEMA 1 Disconnect Switch 3 NEMA 3R Disconnect Switch 3 Two-Groove Drive (elt Driven Fans) Asphaltum (Quaker Coat) Epoxy, Air-dried Coatings Phenolic, Air-dried Synthetic Resin Vinyl (PVC) Zinc (Zincilate) Model CV Model AV 2. High Temp F for CL II fans only. 3. Shipped loose for field mount. Model FCV 38 TWIN CITY FAN - CATALOG 4900

39 Pressure lowers Cast Aluminum lowers TPD, TP / Cast Iron lowers CIW Designed to provide low volume, high pressure air for cooling, ventilating and exhaust systems that handle dust, materials or corrosive fumes. TPD/TP 7" to 18" wheel diameters CIW 6.75" to 14" wheel diameters TPD/TP Airflow to 3,660 CFM Static pressure to 22" w.g. CIW Airflow to 2,000 CFM Static pressure to 12" w.g. Model TPD Catalog 820 (TPD, TP) Catalog 850 (CIW) Installation, Operation and Maintenance Manual - ES-52 See page 41. Model CIW TPD - ARR. 4, 4HI Direct Drive Cast Aluminum Pressure lower SIZE 5-DAY 10-DAY CIW - ARR. 1, 4, 9, 9F, 10 Direct & elt Driven Cast Iron Pressure lower SIZE 5-DAY 10-DAY ODP and TEFC motors are included on QuickShip Program. 3. These fans are not freight allowed. TP - ARR. 1, 9 elt Driven Cast Aluminum Pressure lower SIZE 5-DAY 10-DAY

40 Radial laded Fans Compact & Industrial Fans JRW, RO, RA Designed for industrial process applications. RO/RA 12.25" to 33" wheel diameters JRW 8.75" to 15.63" wheel diameters Model JRW RO/RA Airflow to 14,184 CFM Static pressure to 32" w.g. JRW Airflow to 2,000 CFM Static pressure to 14" w.g. Catalog 902 (RO, RA) Catalog 800 (JRW) Installation, Operation and Maintenance Manual - ES-52 See page 41. Model RA RO - ARR. 9A, 9, 10, CL.22 elt Driven Industrial Radial lade Fan SIZE 5-DAY 10-DAY JRW - ARR. 1, 4, 9, 9F, 10 Direct & elt Driven Compact Design Industrial Fan SIZE 5-DAY 10-DAY 805F 806N 806F 807N 807F 808N 809N RA - ARR. 9A, 9, 10, CL.22 elt Driven Industrial Radial lade Fan SIZE ODP/TEFC 5-DAY 10-DAY ODP and TEFC motors are included on QuickShip Program. 3. RO 905 available in AR. 10 only. 4. These fans are not freight allowed. 40 TWIN CITY FAN - CATALOG 4900

41 Accessories Cast lowers (TPD, TP, CIW), Compact & Industrial (JRW, RO/A) Model TPD Model CIW Model JRW TPD/TP - Cast Aluminum Pressure lower FAN ACCESSORY 5-DAY 10-DAY elt Guard Inlet Flange Outlet Flange Inlet Guard Outlet Guard Shaft Seal Drain w/ Plug Shaft & earing Guard Slide Gate Damper - Inlet Slide Gate Damper - Outlet CIW - Cast Iron Pressure lower FAN ACCESSORY 5-DAY 10-DAY elt Guard Drain Connection Inlet Flange Outlet Flange Inlet Screen Weather Cover Isolators - Floor Mount Shaft Seal Two-Groove Drive Asphaltum (Quaker Coat) Epoxy, Air-dried Coatings Phenolic, Air-dried Synthetic Resin Vinyl (PVC) Zinc (Zincilate) JRW - Compact Design Industrial Fan FAN ACCESSORY 5-DAY 10-DAY Access Door - olted elt Guard - Std. Type Drain Connection Inlet Flange Outlet Flange Inlet Screen Outlet Screen Weather Cover Isolators - Floor Mount, Hanging Isolators - Rails Shaft Seal Two-Groove Drive High Temp Construction, F High Temp Construction, F Asphaltum (Quaker Coat) Epoxy, Air-dried Coatings Phenolic, Air-dried Synthetic Resin Vinyl (PVC) Zinc (Zincilate) RO/RA - Radial lade Fan FAN ACCESSORY 5-DAY 10-DAY Access Door - olted Access Door - Quick-Open elt Guard - Std Type Drain Connection Inlet Flange Outlet Flange Weather Cover AMCA Spark C Construction High Temp Construction, F Two-Groove Drive 41

42 Motor Availability Utility Set, Pressure lower and Radial lade FAN MODEL QUICK SHIP EFFICIENCY HP RPM VOLT/HZ/PH ENCLOSURE Std. Efficiency 1/ /60/ /60/1 ODP & TEFC CJ/FCJ/DDF 5 & 10 Day Std. Efficiency 1/ /60/3 460/60/3 460/60/3 575/60/3 ODP & TEFC Prem. Efficiency /60/3 460/60/3 575/60/3 ODP & TEFC Std. Efficiency 1/ /60/ /60/3 460/60/3 575/60/3 ODP & TEFC 5 Day Std. Efficiency 1/ /60/ /60/1 ODP & TEFC CV/FCV/AV Prem. Efficiency /60/3 460/60/3 575/60/3 ODP & TEFC 10 Day Std. Efficiency 1-50 Prem. Efficiency /60/3 460/60/3 575/60/ /60/3 460/60/3 575/60/3 ODP & TEFC ODP & TEFC Std. Efficiency 1/3-3/ /60/ /60/1 ODP & TEFC TPD/TP 5 &10 Day Std. Efficiency 1/ /60/3 460/60/3 460/60/3 575/60/3 ODP & TEFC Prem. Efficiency /60/3 460/60/3 575/60/3 ODP & TEFC Std. Efficiency 1/3-3/ /60/ /60/1 ODP & TEFC JRW 5 & 10 Day Std. Efficiency 1/3-7 1/ /60/3 460/60/3 460/60/3 575/60/3 ODP & TEFC Prem. Efficiency 1-7 1/2 Std. Efficiency 1/3-3/ /60/3 460/60/3 575/60/3 115/60/ /60/1 ODP & TEFC ODP & TEFC CIW 10 Day Std. Efficiency 1/ /60/3 460/60/3 460/60/3 575/60/3 ODP & TEFC Prem. Efficiency /60/3 460/60/3 575/60/3 ODP & TEFC Std. Efficiency 1/3-3/ /60/ /60/1 ODP & TEFC RA/RO 10 Day Std. Efficiency 1/ /60/3 460/60/3 460/60/3 575/60/3 ODP & TEFC Prem. Efficiency /60/3 460/60/3 575/60/3 ODP & TEFC *Must check individual catalogs for maximum frame sizes on each size & class. 42 TWIN CITY FAN - CATALOG 4900

43 43

44 INDUSTRIAL & COMMERCIAL FANS Centrifugal Fans Utility Sets Plenum & Plug Fans Inline Centrifugal Fans Mixed Flow Fans Tubeaxial & Vaneaxial Fans Propeller Wall Fans Propeller Roof Ventilators Centrifugal Roof & Wall Exhausters Ceiling Ventilators Gravity Ventilators Duct lowers Radial laded Fans Radial Tip Fans High Efficiency Industrial Fans Pressure lowers Laboratory Exhaust Fans Filtered Supply Fans Mancoolers Fiberglass Fans Custom Fans TWIN CITY FAN & LOWER Trenton Lane N Minneapolis, MN Phone: Fax: Twin City Fan Companies, Ltd., Minneapolis, MN. All rights reserved. Catalog images cover the general appearance of Twin City Fan & lower products at the time of publication and we reserve the right to make changes in design and construction at any time without notice.