Inverter Single (50Hz/R410A) 5RMA2-01B(5RMA2-01A)

Transcription

1 Inverter Single (50Hz/R410A) 5RMA2-01B(5RMA2-01A)

2 Inverter Single-50Hz(R410A) Contents Page 1. Models line up Nomenclature Features & Benefits Specifications Dimensions Wiring diagrams Refrigerant cycle diagram Capacity tables Capacity coefficient factor peration range Air flow and temperature distributions(reference data) Sound level Remote controller Installation Product Data 1

3 Test condition of international standard CLASSIFICATIN KSC IS ARI AHAM AS SSA / Indoor DB C( F) (80) 26.7(80) Cooling WB C( F) (67) 19.4(67) Capacity utdoor DB C( F) (95) 35.0(95) WB C( F) (75) 23.9(75) Indoor DB C( F) (70) 21.1(70) Heating WB C( F) (60) 15.6(60) Capacity utdoor DB C( F) (47) 8.3(47) WB C( F)) (43) 6.1(43) Maximum Indoor DB C( F) (80) 32.2(90) WB C( F) (67) 22.8(73) Cooling DB C( F) (115) 43.3(110) perating utdoor WB C( F) (75) 25.6(78) Maximum Indoor DB C( F) (80) 26.7(80) - - WB C( F) (67) 22.8(73) - - Heating DB C( F) (75) 23.9(75) - - perating utdoor WB C( F) (65) 18.3(65) - - Enclosure Indoor DB C( F) (80) 26.7(80) Sweat / WB C( F) (75) 23.9(75) Condensate utdoor DB C( F) (80) 26.7(80) Disposal WB C( F) (75) 23.9(75) Freeze-up/ Low Temperature Indoor utdoor DB C( F) (67) 21.1(70) WB C( F) (57) 15.6(60) DB C( F) (67) 21.1(70) WB C( F) (57) 15.6(60) KS : Korea Standard IS : International Standard rganization ARI : Airconditioning and Refrigeration Institute AHAM : Association of Home Appliance Manufacturers AS : Australia Standard SSA : Saudi Arabian Standard Product Data

4 General Description Split type of Air conditioners are known by the category name of Wall Mounted Type of units.these units can be easily installed in a small space and have exceptional Cooling capacity.designed for Low-noise operation,it ensures a pleasant air conditioned environment. LG ffers various types of units to its customers to suit for the best application and requirement.the following are the important categories offered by LG : 1) General Wall Mounted Type Units : Units with Simplicity in design. 2) Art Cool Units : A new concept of cooling introduced by LG in the field of Air Conditioning. 3) Inverter Units : These units are capable of minimising the Power consumption with the unique inverter technology. Some of the Important Features of these units are listed below : 1) Providing Health to the Customers : By having the Filters such as Plasma Filter which is capable of removing the Micro rganisms up to 0.1 microns. 2) Long Term Money Saving : By providing Features such as Gold Fin, Auto Clean etc. to maintain the same performance for the years. 3) Best Comfort : With Features such as Sleep Mode,Timer,Auto Restart etc. The Units are available with many standard and optional features which gives our Customers the free choice to select the unit of their own desire.for details refer to the Detailed specification followed after this description. LG Electronics Inc. Air Conditioning Division 2008 Product Data 3

5 1. Models Line up 1.1 Indoor Unit Indoor Type kw (kbtu/h) 2.63(9) 3.51(12) 5.28(18) 7.03(24) 8.79(30) 10.55(36) ART CL Mirror *Mirror *Silver AS-W096E*H2 [C09AW* NE2] AS-W126E*H2 [C12AW* NE2] AS-W1868*H1 [C18AW* N81] AS-W2468*H1 [C24AW* N81] *Blue ART CL Mirror *Blue *Metal *White Wood AS-W096U*H1 [C09AW* NU1] AS-W126U*H1 [C12AW* NU1] AS-W1863*H3 [C18AW* N33] AS-W2463*H3 [C24AW* N33] *Mirror ART CL AS-W096F1G2 [A09AW1 NF2] AS-W126F1G2 [A12AW1 NF2] ART CL Red Gold Silver AS-W096F*G2 [A09AW* NF2] AS-W126F*G2 [A12AW* NF2] Wall Mounted Type AS-W096ADR0 [S09AA NA0] AS-W126ADR0 [S12AA NA0] Wall Mounted Type AS-W096E1G0 [S09AW1 NE0] AS-W126E1G0 [S12AW1 NE0] AS-W1865DH2 [S18AW N52] AS-W2465DH2 [S24AW N52] Wall Mounted Type AS-W0964GG1 [S09AM N41G] AS-W1264GG1 [S12AM N41G] AS-W1865GG1 [S18AM N51G] AS-W306DGM0 [S30AW ND0] AS-W366DGM0 [S36AW ND0] * denotes the color or the picture used on the front grille of the unit (refer to the Nomenclature section) Product Data

6 1. Models Line up 1.2 utdoor Unit Heat pump AS-W0964GG1[S09AM N41G] AS-W096ADR0 [S09AA NA0] AS-W096E*H2[C09AW* NE2] AS-W096E1G0[S09AW1 NE0] AS-W096F1G2[A09AW1 NF2] AS-W096F*G2 [A09AW* NF2] AS-W096U*H1[C09AW* NU1] AS-W1264GG1[S12AM N41G] AS-W126ADR0 [S12AA NA0] AS-W126E1G0[S12AW1 NE0] AS-W126E*H2 [C12AW*NE2] AS-W126F1G2 [A12AW1 NF2] AS-W126F*G2 [A12AW* NF2] AS-W126U*H1[C12AW* NU1] No. of connectable indoor units Max.1 Total capacity index of connectable kw indoor units kbtu/h 9 12 Power supply 1ø, V, 50Hz Chassis Heat pump AS-W1865DH2[S18AW N52] AS-W1863*H3[C18AW* N33] AS-W1868*H1 [C18AW* N81] AS-W1865GG1[S18AM N51G] AS-W2463*H3[C24AW* N33] AS-W366DGM0[S36AW ND0] No. of connectable indoor units Max.1 Total capacity index of connectable kw indoor units kbtu/h Power supply 1ø, V, 50Hz Chassis Heat pump AS-W2465DH2[S24AW N52] AS-W2468*H1 [C24AW* N81] AS-W306DGM0[S30AW ND0] No. of connectable indoor units Max.1 Total capacity index of connectable kw indoor units kbtu/h Power supply 1ø, V, 50Hz Chassis 2008 Product Data 5

7 2. Nomenclature A S W G G Code Type Code of Model Meaning 1 Production Center, A~Z L: Chang-won R22 Refrigerant A: Chang-won R410A 2 Product Type A~Z S: Split Type Air Conditioner 3 Cooling/Heating/Inverter A~Z C: Cooling only H: Heat pump X: C/ + E/Heater Z: H/P + E/Heater V: AC Inverter C/ N: AC Inverter H/P Q: DC Inverter C/ W: DC Inverter H/P 4, 5 Capacity 0~9 Cooling/Heating Capacity Ex. "09" 9,000 Btu/h 6 Electric Range 1~9 1: 115V/60Hz, A~Z 2: 220V/60Hz 3: V/60Hz 5: V/50Hz 6: V/50Hz 7: 110V, 50/60Hz 7 Chassis A~Z Name of Chassis 8 Look A~Z ART CL models B : Blue C : Cherry K : Mecca 1 : The Kiss(SF chassis) W: White D : Wood R : Mirror 2 : The Sunset(SF chassis) M: Metal Q : Quran 3 : London Bridge(SG chassis) General Wall Mounted models D Look ( Panel Type) G Look ( Grille Type) Glory Look :- (a) F Look (Blue color) (b) H Look (Gold) (c) J Look (Silver) 9, 10 Function A~Z A B C D E F G H I J K L M N P Q R S T U V W Y Basic Basic+4Way Plasma Filter Plasma Filter+4 Way Tele+LCD Tele+LCD+Nano plasma+4way NBF F+(A/changeove)+A/clean+Low A NBF F+(A/changeove)+A/clean+4way+Low A Tele+LED+4way Internet Plasma F+4Way+xygen generator NBF F+(A/changeove)+A/clean NBF F+(A/changeove)+A/clean+4way NBF F+(A/changeove)+A/clean+PTC NBF F+(A/changeove)+Autoclean+4way+PTC NBF F+(A/changeove)+A/clean+4way+Low A+PTC Negative ion+a/clean (Nano)Plasma+Negative ion+a/clean 4way+(Nano)Plasma F+Negative ion+a/clean Nano Plasma F+4Way+(A/changeove)+A/clean+xygen generator 4way+(Nano)Plasma F+Negative ion+a/clean+xygen generator Dry contact Basic + Low A 11 Serial No. 1~9 LG Model Development Serial No Product Data

8 2. Nomenclature Europe Model Number C 0 9 A W M N N 1 Development sequence Chassis For ART CL type E : SE chassis F : SF chassis U : SU chassis 8 : S8 chassis For Wall mounted type D : SD chassis 4 : S4 chassis 5 : S5 chassis Indicator for unit type N : Indoor Color of the Panel (only ART CL Models) M : Metal (Silver) R : Mirror (Black) B : Blue D : Wood W : White Type of peration W : DC inverter Deluxe N : DC inverter Normal Type of Refrigerant A : R410A Cooling / Heating Capacity (kbtu/h) Model Type A : ART CL Panel type C : ART CL Mirror type S : Wall mounted type 2008 Product Data 7

9 3. Features & Benefits LG Air Conditioners are environment-friendly and future-oriented. LG air conditioners are environment-friendly and future-oriented. To reduce freon gas, a prime ozone destroyer, we adopted an alternative refrigerant R-410A, and neo plasma air-purifying system for powerful sterilization for health-conscious customers. Also, ARTCL series with outstanding designs have received International Forum Design Award and Reddot Design Award. These air-conditioners have improved air flow innovatively to realize world s lowest noise, and provide a more pleasant and convenient indoor environment. Environmental concern 2008 As the concern for environment increases day by day, EC Directive made it a regulation to put an indication on all air conditioning products. With the information regarding energy-saving, customers will easily understand products considering the environment. Customers will have to purchase the products considering the energy label to meet their needs. Energy label shows the energy consumption of the unit classified with 7 different colors. Energy Efficiency Class of The Unit In Cooling Mode : Energy Efficiency Class of The Unit In Heating Mode : Product Data

10 3. Features & Benefits DC Inverter? You may have heard the excitement about Inverter technology, LG Inverters are the pinnacle of energy efficiency due to the innovative operation. Rather than using a constant speed compressor, the LG Inverter system uses a variable speed compressor, which means the Cooling or Heating capacity of the Air Conditioning can be varied to suit Indoor conditions. This makes the LG Inverter Units more economical & efficient to operate, produce less noise than standard counterparts and contain most superior features on the market. All LG Inverter units have the major benefits including premium features like Economical Energy Saving Unlike ordinary Conventional air conditioners, inverter air conditioners can control the speed of compressors to adjust cooling and heating. When indoor temperatures reach your desired levels, inverter air conditioners can operate their compressors at low speeds and maintain desired temperatures, thus saving you electricity cost by about 44% compared to conventional. Recouping the Initial Investment Cost Though the initial purchase price is a little higher, in case you use an inverter air conditioner in the long term, you can reduce electricity cost to save on the whole investment and management costs. Money Inverter Conventional Energy Saving Save 44% 1Year Year Conventional Inverter Energy Saving! Low Noise! Powerful Cooling & Heating! 2008 Product Data 9

11 3. Features & Benefits Strong Powerful Cooling & Heating You can change the power by changing the compressor frequency. perational power with a greater scope - When you return home from outside, in case you start the air conditioner to heat or cool the room, you can speed up the compressor, enhance the power and then operate it. Also, when indoor temperature reach your desired levels, you can reduce the speed of the compressor and lower the power. Thus, the product's operational power has a greater range from low to high levels. Capable Powerful Heating Capacity (Chilly Area Available) Provides the greatest heating performance in cold areas - When outdoor temperatures fall to as low as -10, you can faster increase the speed of the compressor, and simultaneously raise the quantity of refrigerant using the electronic expansion valve, thus further increasing the heating performance compared to ordinary conventional model. You can heat the room even in cold areas using the air conditioner. 100% Energy Saving Low Noise Powerful Cooling & Heating 138%(H) High Efficiency Low Cost Light Weight 138%(H) 100% utdoor Temp.( C) 40 C (utlet) Max Min Energy Saving Conventional 12% Inverter (min) Inverter (max) Quick Cooling & Heating 12% -20 T1-15 T1 : 35% up Conventional Inverter Compared to conventional air conditioners, inverter air conditioners can operate their compressors faster, thus giving them powerful performance. Therefore, on returning home from outside during hot summer days, you can speed up the compressor to enhance the performance and cool the room. In case outdoor temperatures are low in winter, inverters operate more powerfully than conventional, thus heating the room faster. Temp. Conventional Target Temp. Inverter 50% Time of Convention Time Product Data

12 3. Features & Benefits NE-Plasma Air Purifying System LG Electronics unique neo-plasma air purifying system, equipped with 12-level bio-enzyme filters, has further enhanced its sterilization power. While air passes each level of filters, the system can more powerfully eliminate household's fine dust and molds, ordinary odor, food smell, and cigar smoke, as well as can destroy bacteria's cell walls to completely kill them. It has a strong sterilization power. Have you ever experienced these symptoms? Though the industrial development has enhanced people's quality of life and their satisfaction in living, it is increasingly creating various kinds of pollution, hazardous substances and viruses. In particular, substances (household tick dust, molds, etc.) that create allergies give rise to respiratory diseases and atopic diseases. Harmful gases, the prime cause of 'new house syndromes, create chronic headache. Whenever seasons change, You have runny nose Asthma, and Continuous coughs. The skin is itchy without knowing reasons, Frequent headache, and chronic fatigue... You scratch it again 1 First antibiotic Allergy Mold Mite Big dust Blanket dust 2 Fishy smell Foot stink Smoke dor of construction ingredient dor of food garbage Chemical substance Animal smell dor of food garbage Chemical substance Influenza Virus Allergy Mite Micro dust Deodorize Mold Pollutant 2008 Product Data 11

13 3. Features & Benefits Plasma Filter Nano Bio Fusion Filter Nano bio fusion filters allow their nano-size bio enzymes to directly penetrate through cell walls of bacteria and allergen to decompose The PLASMA Air Purifying System developed uniquely by LG not only removes microscopic contaminants and dust, but also removes house mites, pollen, and pet fur to prevent allergic diseases like asthma. its cell nuclei and kill them.while conventional methods merely inactivate bacteria or destroy external cell walls, this innovative sterilization method can completely decompose bacteria's cell nuclei and kill them. 5 Bacteria, Virus Bio Active Site Nano Particle Nano Particle Nano Particle Active State Bacteria Selective Capture Bacteriolysis Nano Particle Polluted Air Regeneration (Active State) Distinctions from Conventional Filters Conventional 4 Simply inactivate bacteria Destroy bacteria but allow part of them to survive Nano Bio Fusion Filter The bio enzyme destroys cell walls and nuclei of bacteria and allergens, thus completely kills bacteria 3 Nano-size carbon filters catch fine odorous particles again, and doubly and completely remove odors from the household, thus offering a pleasant environment. What is Nano Carbon Ball? 2 Nano Carbon Filter Nano(1/1Bil) ball structure,consisted of Nano carbon, is adopted as deodorizing material first in the world 200~500nm Kitasato Research Center of Environmental Sciences - Inactivating Germs Test Result 99.9% Performance (No. 16_0113_1,2,3) Clean Air Japan Food Research Laboratories - Inactivating Germs Test Result 99.9% Performance (No ,2,3,4,5) - Killing Virus (No ,2,3) Japan Spinners Inspecting Foundation (No , ) - NCB Deodorizing 4 Type Test Result 78%~98% Security Pre Filter The antibacterial prefilters primarily remove large dusts, molds, and quilt dusts Product Data Triple Filter FITI Korea Consumer Science Center (No A-01) - Killing bacteria, fungi Test Result 99.9% Security ITS(International Technical Standard Center) (No. IL26937-A,B) - Inactivating bacteria Test Result 99.9% Security The triple filters consist of a various organic-compound filter to eliminate displeasure and pain in the eyes and necks with various organic compounds. It also has a formaldehyde filter to cut off formaldehyde, a prime cause of new-house syndromes, and prevents symptoms such as dermatitis, vomiting and pneumonia. And lastly, it has a filter to remove ordinary odors that are causes of migraine and chronic fatigues.

14 3. Features & Benefits Healthy Dehumidification LG Wall Mounted Split models feature a Dehumidification mode to remove uncomfortable humidity from the room without over cooling. Indoor Temperature Distribution Chart Conventional Since the surrounding temperature is measured after the air from the unit is widely distributed, an accurate assessment of the air is not possible. Healthy Dehumidification By increasing the Vane Angle, a better assessment of the actual temperature is possible to prevent over cooling. Auto Clean The main cause of air conditioner's odor is molds that breed in the heatexchanger. If you turn off the air conditioner as it is, molds and bacteria will breed in the wet heat exchanger. The automatic cleaning function will dry the wet heat exchanger to prevent molds and bacteria from breeding. It will eliminate air conditioner's odor and save you from frequent cleaning efforts. When you press "Auto Clean, Auto clean starts after cooling operation. In 30 minutes, Auto clean" dries the inner part of Air conditioner. 1STEP : Dries the evaporator with super-weak, lownoise air blowing, and removes remaining moisture. 2STEP : Fundamentally removes the sources of molds once again through the neo plasma system Product Data 13

15 3. Features & Benefit Low Level Noise & Vibration In the case of the inverter air conditioner s outdoor equipment, when indoor temperatures reach your desired levels, you can lower the speed of the compressor operating inside the outdoor equipment, thus further reducing noise compared to ordinary conventional air conditioners. Also, the indoor equipment, which adopts a BLDC motor, can achieve even quieter and industry s lowest-level noise, compared to existing conventional air conditioner. Since even the outdoor equipment is quiet, though the air conditioner is hung on the wall, it has subdued noise, thus not disturbing your neighbors. It is perfect for sleeping, studying, and a quiet indoor ambience. Indoor 20dB utdoor 45dB [Indoor equipment] 1. Uses low-noise BLDC motor and fan 2. Shuts off noise with an all-side panel design Anti Corrosion Gold Fin [utdoor equipment] 1. Low-noise inverter compressor and low-noise fan 2. Designed for optimizing compressor vibration LG s utdoor Heat Exchanger is coated with a golden anticorrosive epoxy treatment on the aluminum coil to minimized corrosion. This maintains heat transfer properties of the coil for an extended time where as non-gold Fin coils progressively lose efficiency due to surface corrosion. Standard on every LG air conditioner, this assists in areas suffering from pollution or near the ocean where the unit may subjected to higher levels of salt. Low Noise Compressor Salt Spray Test for 15 Days After 15 Days LG Gold Fin Anti Corrosion Gold Coated Aluminum After 15 Days Conventional Starting to corrode Uncoated Aluminum Gold Fin is long lasting, durable and makes the utdoor Unit look prestigious Product Data

16 3. Features & Benefits ptimized Cooling & Heating Air Flow LG Electronics' air conditioner, which adopts the twin air vanes, blows winds horizontally far away in the cooling mode to prevent direct blowing. And, in the heating mode, the air conditioner pushes winds downwards to provide warm air evenly, thus offering pleasant air. Cooling mode Heating mode New Chaos Swing Cooling mode Heating mode 0.5hr 1hr 2hr 0.5hr 1hr 2hr The most comfortable airflow for the human body can be found in nature. After analysis,lg has applied the scientific Chaos theory to its air conditioners to effectively reproduce a natural breeze. The Chaos technology recreates the flow of natural air by controlling the angle speed and movement of the air vane. It also minimizes the temperature difference between high and low areas in the room,creating a more comfortably conditioned environment. LG Co., A Co., B Even & Fast Air flow LG Electronics' air conditioner improves the difference between high and low indoor temperatures. It allows you to reach your desired temperatures even faster. It swings with random angle speed (0ms~12ms) to reproduce a natural breeze 2008 Product Data 15

17 3. Features & Benefits Indoor Temperature Distribution Chart 4 Way Auto Swing Chaos Swing Chaos Swing Effect Auto Swing LG Air Conditioning units can now automatically distribute the air 4-ways. This effectively eliminates hot and cold patches, keeping the room at a more stable temperature. Jet Cool TM The Jet cool function allows quick cooling. In this mode, strong, cool air is blown at high speed for 30 minutes, until the room temperature reaches 18 C. ARTCL_MIRRR TYPE A little interior accent for the modern you. The romantic pastel colors, subdued luster,modern texture and the super slim design of LG ARTCL Mirror are the answers to your unique mood and personality. 10m It can cool the spot ten meters away in 3 minutes. ARTCL_PANEL TYPE LG's unique frame-style of ARTCL panel type. Its super-slim and sensory design satisfies your sense Product Data

18 3. Features & Benefits Auto Changeover With heat pump model,cooling and heating operation is changed automatically on the base of setting temp. Low Ambient Cools the room as is necessary, even in winter. - In case you hold a party indoors in winter, you need to operate equipment in the computer server room for long hours, or you cannot open windows for the security's sake, you can cool the room using the Inverter air conditioner. Under such circumstances, ordinary conventional air conditioners may have heat exchangers in indoor equipment frozen, thus not properly functioning to cool the room. However, in the case of inverter air conditioners, you can adjust the speed of compressors and outdoor equipment's fans to prevent heat exchangers in indoor equipment from being frozen, thus cooling the room more easily. Initial Setting Temp:18 C Memorize final setting temp. Auto Restart Function Hot Start Function During starting of the unit in the heating mode it prevents cold air blowing from the unit. It starts the indoor fan only after indoor unit pipe temperature reaches a preset value (28 C). When indoor unit pipe temperature reaches 28 C, then for initial 1 minute the indoor fan runs at a low speed and after that at the setting speed. In case of a sudden power failure, It automatically sets the A/C to settings before the power failure when power returns. Sleep Mode Auto Control With one touch of the Sleep mode button, it automatically programs the Air Conditioning Unit to turn off, controls the fan speed and adjusts the set temperature for a more comfortable sleep Product Data 17

19 3. Features & Benefits Modern & Luxury Design Its premium designs match well with any part of the household. Gallery In My Room Your room will shine chicly with a famous painting or a beautiful photo (showcased in the product). LG ARTCL will convert your room into a gallery. Do you like Western paintings, riental paintings, or photos? The product features your desired style of famous paintings. Klumt, Gustav( ) The Kiss-Der Kuss EX)LS-H126F1L0 Courbet, Gustav( ) Lake Geneva at Sunset EX)LS-H126F2L0 Ez-Replaceable Color Panel The ARTCL chameleon panel enables you to change the air conditioner color according to background colors, the first of its kind in the world. When you want to change interior designs (wallpaper colors, furniture, etc.) or you want to change the air conditioner designs after you are bored with them. You can only change the panel. Digital Air Flow Control You feel more comfortable and convenient by controlling air flow. Normal Fast & Even Widely Jet Cool Speedy & Powerful Sleep Mode Indirectly & Softly 3 Dimensional Air Flow Ultra Thin Technology mixed with sense of art result in the super slim design which is of 129mm depth. Designed like a work of art, and the new concept of 3 dimensional air flow. It gives even cooling as well as quick cooling from front and bothsides making the space evenly cool. The slimmest in the world!!! 129mm Product Data

20 4. Specifications Inverter single Inverter Single, ART CL Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W096ADR0 [S09AA NA0] AS-W096E*H2[C09AW* NE2] 0.89~2.64~ ~2.64~3.69 3,070~9,000~12,620 3,070~9,000~12, ~3.60~ ~3.60~5.00 3,070~12,300~17,060 3,070~12,300~17, / / / 4 3 / 4 3 / 4 3 / / /50 1 / / (300) 10.5(371) 29(1,024) 27.0(954) / 27 / / 27 / R410A,1,000(35.3) R410A, 1,000(35.3) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA21 5RS102XAA21 Brushless DC Motor Brushless DC Motor FV50S FV50S CS-7L 115 CS-7L 115 Cross Flow Fan Cross Flow Fan Propeller Propeller BLDC BLDC *1.0 3*1.0 4*1.5 (Including Earth) 4*1.5 (Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 9.52(3/8) 21.5 / 16.0(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 925*295* *282* *11.6* *11.1* *545* *545* *21.5* *21.5* (25.6) 10(22.1) 34(74.6) 32(70.6) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SA+UL SE + UL Thermistor Thermistor - Neo 3 / 4 / 4 3 / 4 / 4 Auto Auto Auto Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C hr, n/ff 24h, n/ff 2 2 (Logic) Smart Clean - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data 19

21 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W096F1G2[A09AW1 NF2] AS-W096F*G2 [A09AW* NF2] 1.30~2.70~ ~2.70~3.50 4,436~9,210~11,942 4,436~9,210~11, ~3.50~ ~3.50~4.20 4,436~11,940~14,330 4,436~11,940~14, / / / / / / / / 50 1 / / (283) 8(283) 26(918) 26(918) / 29 / 25 / / 29 / 25 / R410A, 1,000(35.3) R410A, 1,000(35.3) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA21 5RS102XAA21 Brushless DC Motor Brushless DC Motor FV50S FV50S CS-7L 115 CS-7L 115 Tubo Fan Tubo Fan Propeller Propeller BLDC BLDC *1.0 3*1.0 4*1.5 (Including Earth) 4*1.5 (Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 9.52(3/8) 21.5 / 16.0(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 770*545* *545* *21.5* *21.5* *540* *540* *21.3* *21.3*9.6 15(33) 15(33) 34(74.9) 34(74.9) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SF + UL SF + UL Thermistor Thermistor Nano Nano 3 / 4 / 4 3 / 4 / 4 Auto Auto Auto Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data

22 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W096U*H1[C09AW* NU1] AS-W126ADR0 [S12AA NA0] 0.65 ~ 2.64 ~ ~3.51~4.04 2,200 ~ 9,000 ~ 11,080 3,070~12,000~13, ~ 3.17 ~ ~4,57~5,49 1,800 ~ 10,800 ~ 13,950 3,070~15,600~18, / 870 1,090 / 1, / / / / / 220 ~ 240 / 50 1 / / (318) 9.5(335) 26(918) 29(1,024) /32/28 36 / 27 / R410A, 720(25.4) R410A, 1000(35.3) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA 5RS102XAA21 Brushless DC motor Brushless DC Motor RB68A FV50S CS-7L 115 CS-7L 115 Cross Flow Fan BLDC Propeller BLDC AC Induction BLDC *1.0 3*1.0 4*1.5(Including Earth) 4*1.5(Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 9.52(3/8) 21.5 /16(0.85 / 0.63) 21.5 /16(0.85 / 0.63) 1,030*290* *295* *11.4* *11.6* *545* *545* *21.5* *21.5* (20.9) 11.6(25.6) 31(68.3) 34(74.9) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SU + UL SA+UL Thermistor Thermistor Nano - 3 / 4 / 3 3 / 4 / 4 Auto Auto Manual Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24hr, n/ff 2 2 (Logic) - Smart Clean Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data 21

23 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W126E*H2 [C12AW*NE2] AS-W126F1G2 [A12AW1 NF2] 0.89~3.51~ ~3.50~4.00 3,070~12,000~13,800 4,436~11,940~13, ~4.57~ ~4.20~5.00 3,070~15,600~18,720 4,436~14,330~17,060 1,090 / 1,260 1,090 / 1, / / / / / /50 1 / / (371) 9.5(336) 27(954) 34(1,200) / 27 / 22 / / 32 / 25 / R410A, 1,000(35.3) R410A, 1,000(35.3) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA21 5RS102XAA21 Brushless DC Motor Brushless DC Motor FV50S FV50S CS-7L 115 CS-7L 115 Cross Flow Fan Tubo Fan Propeller Propeller BLDC BLDC *1.0 3*1.0 4*1.5 (Including Earth) 4*1.5 (Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 9.52(3/8) 21.5 / 16.0(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 915*282* *600* *11.1* *23.6* *545* *545* *21.5* *21.5*9.6 10(22.1) 15(33) 32(70.6) 32(70.6) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SE + UL SF + UL Thermistor Thermistor Nano Nano 3 / 4 / 4 3 / 4 / 4 Auto Auto Auto Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data

24 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W126F*G2 [A12AW* NF2] AS-W126U*H1[C12AW* NU1] 1.30~3.50~ ~ 3.52 ~ ,436~11,940~13,648 2,800 ~ 12,000 ~ 13, ~4.20~ ~ 3.96 ~ ,436~14,330~17,060 4,400 ~ 13,500 ~ 14,850 1,090 / 1,160 1,090 / 1, / / / / / / 50 1 / 220 ~ 240 / (336) 9.5(335) 34(1,200) 26(918) / 32 / 25 / 23 35/33/ R410A, 1,000(35.3) R410A, 810(28.6) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA21 5RS102XAA Brushless DC Motor Brushless DC motor FV50S RB68A CS-7L 115 CS-7L 115 Tubo Fan Cross Flow Fan Propeller Propeller BLDC AC Induction *1.0 3*1.5 4*1.5 (Including Earth) 4*1.5(Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 12.7(1/2) 21.5 / 16.0(0.85 / 0.63) 21.5 /16(0.85 / 0.63) 600*600*145 1,030*290* *23.6* *11.4* *545* *545* *21.5* *21.5*9.6 15(33.1) 9.5(20.9) 32(70.5) 31(68.3) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SF + UL SU + UL Thermistor Thermistor Nano Nano 3 / 4 / 4 3 / 4 / 3 Auto Auto Auto Manual Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data 23

25 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W1863*H3[C18AW* N33] AS-W1868*H1 [C18AW* N81] 1.61~5.28~ ~ 5.28 ~ ,500~18,000~19,900 6,000 ~ 18,000 ~ 19, ~6.07~ ~ 6.07 ~ ,700~20,700~23,000 4,800 ~ 20,700 ~ 22,700 1,630 / 1,890 1,640 / 1, / / / / , ,50 1 / 220~240 / (499) 16(565) 42(1,483) 42(1,483) / - / / 39 / R410A, 1,200(42.3) R410A, 1,200(42.3) 20(0.22) 20(0.22) E-SCRLL E-SCRLL 5CS130XCA03 5CS130XCC03 Brushless DC Motor BLDC RB68A RB68A CS-7L N120 CS-7L N120 Cross Flow Fan Cross Flow Fan Propeller Propeller AC Induction AC Induction *2.5 3*1.5 4*2.5(Including Earth) 4*1.5(Including Earth) 6.35(1/4) 6.35(1/4) 12.7(1/2) 12.7(1/2) 21.5 /16(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 1,170*315*173 1,107*299*200 46*12.4* *11.8* *655* *655* *25.8* *25.8* (28.7) 14.1(31.1) 64(141.1) 46(101.4) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) S3 + UE S8 + UE Thermistor Thermistor Neo 3 / 4 3 / 4 / 4 Auto Auto Auto Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data

26 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W2463*H3[C24AW* N33] AS-W2468*H1 [C24AW* N81] 4.43~7.03~ ~ 7.03 ~ ~24000~ ,200 ~ 24,000 ~ 26, ~7.95~ ~ 8.44 ~ ,300~27,100~28,500 11,500 ~ 28,800 ~ 30,300 2,600 / 2,800 2,450 / 2, / / / / , ,50 1 / 220~240 / (587) 20.3(717) 45(1,587) 58(2,048) / - / 37 / / 40 / 36 / R410A, 1,490(52) R410/1,800(63) 30(0.32) 30(0.32) Rotary Rotary(Non Tropical) TNB220FLBM1 5KD240XCA21 Brushless DC Motor BLDC MEL 56 FV50S CS-7L N115 Cross Flow Fan Cross Flow Fan Propeller Propeller BLDC AC Induction *2.5 3*2.5 4*2.5 (Including Earth) 4*2.5 (Including Earth) 9.52(3/8) 9.52(3/8) 15.88(5/8) 15.88(5/8) 21.5 / 16.0(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 1,170*315*173 1,107*299*200 46*12.4* *11.8* *655* *808* *25.8* *31.8* (28.7) 14.1(31.1) 64(141.1) 60(132) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 30(98) 7(23) 15(49) S3 + UE S8 + UE1 Thermistor Thermistor nano - 3/4 3 / 4 / 4 Auto Auto Auto Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data 25

27 4. Specifications Inverter single Inverter Single, General Wall Mounted Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary. AS-W096E1G0[S09AW NE0] AS-W0964GG1[S09AM N41G] 0.89~2.64~ ~ 2.64 ~ ,070~9,000~12,620 3,070 ~ 9,000 ~ 11, ~3.60~ ~ 3.17 ~ ,070~12,300~17,060 3,070 ~ 10,800 ~ 13, / / 930 3/4 3.8 / 4.3 3/4 3.8 / , ,50 1 / 220 ~ 240 / (300) 9.5(335) 29(1,024) 26(918) / 27 / 22 / / 28 / R410A, 1,000(35.3) R410A, 630(22.2) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA21 5RS102XAA21 Brushless DC Motor Brushless DC motor FV50S FV50S CS-7L 115 CS-7L 115 Cross Flow Fan Cross Flow Fan Propeller Propeller BLDC AC Induction *1.0 3*1.0 4*1.5(Including Earth) 4*1.0 (Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 9.52(3/8) 21.5 /16(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 915*282* *270* *11.1* *10.6* *545* *545* *21.5* *21.3*9.7 8(17.6) 7.5(16.5) 32(70.6) 32(70.6) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SE + UL S4 + UL Thermistor Thermistor Neo Neo 3/4 3 / 4 / 4 Auto Auto Auto Manual Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) Product Data

28 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W126E1G0[S12AW* NE0] AS-W1264GG1[S12AM N41G] 0.89~3.52~ ~ 3.52 ~4.04 3,070~12,000~13,800 3,070 ~ 12,000 ~ 13, ~4.57~ ~ 4.00 ~ ,070~15,600~18,720 3,070 ~ 13,650 ~ 16,600 1,090 / 1,260 1,090 / 1, / / / / / 220 ~ 240 / 50 1 / 220 ~ 240 / (335) 10.8(381) 29(1,024) 26(918) / 27 / 22 / / 30 / R410A, 1,000(35.3) R410A, 940(33.2) 20(0.22) 20(0.22) Rotary Rotary 5RS102XAA21 5RS102XAA21 Brushless DC Motor Brushless DC motor FV50S FV50S CS-7L 115 CS-7L 115 Cross Flow Fan Cross Flow Fan Propeller Propeller BLDC AC Induction *1.0 3*1.0 4*1.5(Including Earth) 4*1.0 (Including Earth) 6.35(1/4) 6.35(1/4) 9.52(3/8) 9.52(3/8) 21.5 /16(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 915*282* *270* *11.1* *10.6* *545* *545* *21.5* *21.3*9.7 8(17.64) 7.5(16.5) 32(70.6) 32(70.6) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) SE + UL S4 + UL Thermistor Thermistor Nano Neo 3/4 3 / 4 / 4 Auto Auto Auto Manual Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C h, n/ff 24h, n/ff 2 2 (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data 27

29 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W1865DH2[S18AW N52] AS-W1865GG1[S18AM N51G] 1.76~5.28~ ~5.28 ~ ,000~18,000~19,800 6,000 ~ 18,000 ~ 19, ~6.07~ ~5.80 ~ ,800~20,700~22,700 4,800 ~ 19,790 ~ 22,700 1,640 / 1,770 1,730 / 1, / / / / / / 50 1 / 220 ~ 240 / (565) 13.0(459) 42(1,483) 42(1,483) / 39 / / 40 / R410A, 1,200(40.8) R410A 1,200(40.8) 20(0.22) 20(0.22) E-SCRLL E-SCRLL 5CS130XCC03 5CS130XCA Brushless DC Motor Brushless DC motor RB68A RB68A CS-7L N120 CS-7L N120 Cross Flow Fan Cross Flow Fan Propeller Propeller AC Induction AC Induction *1.5 3*1.5 4*1.5 (Including Earth) 4*1.5(Including Earth) 6.35(1/4) 6.35(1/4) 12.7(1/2) 12.7(1/2) 21.5 / 16.0(0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 1,090*300*180 1,090*300* *11.8* *11.8* *655* *655* *25.8* *25.8* (28.7) 13(28.7) 46(101.4) 46(101.4) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 15(49) 15(49) 7(23) 7(23) S5 + UE S5 + UE Thermistor Thermistor Nano Neo 3 / 4 / 4 3/ 4 / 4 Auto Auto Auto Manual Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C hr, n/ff 24h, n/ff 2 2 (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data

30 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose(.D/ I.D.) mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W2465DH2[S24AW N52] AS-W306DGM0[S30AW SD0] 3.87~7.03~ ~ 8.0 ~ ,200~24,000~26,400 12,283 ~ 27,296 ~ 30, ~8.08~ ~ 9.6 ~ ,500~27,570~30,300 18,084 ~ 32,775 ~ 34,802 2,500 / 2,880 2,650 / 3, / / / / / / 50 1 / 220 ~ 240 / (636) 21(350) 58(2,048) 58(2,048) / 41 / / 43 / R410A, 1,800(63.5) R410A, 1,800(63.3)(at 10m) 30(0.32) 30(0.32) Rotary Rotary 5KD240XCA21 5KD240XAE21 Brushless DC Motor Brushless DC motor FV50S FV50S CS-7LN115 CS-7L 115 Cross Flow Fan Cross Flow Fan Propeller Propeller AC Induction Brushless DC motor *2.5 3*2.5 4*2.5(Including Earth) 4*0.75 (Including Earth) 9.52(3/8) 6.35(1/4) 15.88(5/8) 15.88(5/8) 21.5 / 16.0 (0.85 / 0.63) 21.5 / 16.0(0.85 / 0.63) 1,090*300*178 1,209*346* *11.8* *13.6* *808* *808* *31.5* *31.8* (28.7) 18(39.7) 60(132.3) 60(132.3) -5~43(23~109.4) -5~43(23~109.4) -10~24(14.0~75.2) -10~24(14.0~75.2) 30(98) 50(164) 15(49) 30(98.4) S5 + UE1 SD + UE1 Thermistor Thermistor Neo 3 / 4 / 4 3 / 4 / 3 Auto Auto Auto Auto Wireless LCD Wireless LCD 18 C ~ 30 C 18 C ~ 30 C 16 C ~ 30 C 16 C ~ 30 C hr, n/ff 24h, n/ff 2 3 (Logic) - - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data 29

31 4. Specifications Inverter single Models Cooling Capacity Heating Capacity Unit kw Btu/h. kw Btu/h. Power Input Cooling/Heating W Running Current Cooling/Heating A Starting Current Cooling/Heating A EER W/W Btu/h.W CP W/W Power Supply Ø / V / Hz Power Factor % Air Flow Rate Indoor,Max m 3 /min(cfm) utdoor,max m 3 /min(cfm) Moisture Removal l/h. Sound Level Indoor,H/M/L db(a)±3 utdoor,max db(a)±3 Refrigerant & Charge (at 7.5 m) g(oz) Additional Refrigerant charge g/m(oz/ft) Compressor Type Model Motor Type il Type il Charge cc.l.p. name Fan(Indoor) Type Motor utput W Fan(utdoor) Type Motor Type Motor utput W Circuit Breaker* A Power Supply Cable No.*mm 2 Power and Transmission Cable No.*mm 2 No.*mm 2 Piping Connections Liquid Side mm(in) Gas Side mm(in) Drain Hose.D / I.D mm(in) Dimensions Indoor (W*H*D) mm inch utdoor (W*H*D) mm inch Net Weight Indoor kg(lbs) utdoor kg(lbs) peration Range Cooling(utdoor) C( F) Heating(utdoor) C( F) Max. Piping Length m(ft) Max. Elevation Difference m(ft) Tool Code(Chassis) Indoor + utdoor Functions Temperature Control Plasma Filter Prefilter(washable/anti-fungus) Auto Clean CHAS Wind(Auto Wind) Steps, Fan/Cool/Heat Airflow Direction Control(up & Down) Airflow Direction Control(left & right) Remote Controller Type Setting Temperature Cooling Range Heating Auto peration (Micom Control) Auto Changeover (Micom Control) Self Diagnosis Timer Sleep peration Soft Dry peration Restart Delay(minute) Deice Control(Defrost) Hot Start Jet Cool Low Ambient peration Special Function AS-W366DGM0[S36AW SD0] 4.0 ~ 9.0 ~ ,648 ~ 30,708 ~ 33, ~ 10.4 ~ ,107 ~ 35,485 ~ 37,532 2,980 / 3, / / / 220 ~ 240 / (416) 68(1133) / 44 / R410A, 2,200(77.6) 35(0.38) Rotary 5JD420XAD22 Brushless DC motor FV50S 1,300 CS-7L 115 Cross Flow Fan 75 Propeller Brushless DC motor *2.5 4*0.75 (Including Earth) 6.35(1/4) 15.88(5/8) 21.5 / 16.0(0.85 / 0.63) 1,209*346* *13.6* *1,060* *41.7* (41.9) 75(165.3) -10 ~ 43 (14 ~ 109.4) -15 ~ 24(5 ~ 75.2) 50(164) 30(98.4) SD + UE2 Thermistor Neo 3 / 4 / 3 Auto Auto Wireless LCD 18 C ~ 30 C 16 C ~ 30 C - 24h, n/ff 3 - Note : : Applie, X : Not applied, : No relation Filters are optional in some specific areas. For Circuit Breaker Rating, please conform to local standards whenever necessary Product Data

32 5. Dimensional drawings Indoor units 5.1 Indoor Units 2008 Product Data 31

33 Product Data 5. Dimensional drawings Indoor units

34 5. Dimensional drawings Indoor units 2008 Product Data 33

35 5. Dimensional drawings Indoor units Ø Ø Product Data

36 5. Dimensional drawings Indoor units 2008 Product Data 35

37 5. Dimensional drawings Indoor units Ø M Unit utline Place a level on raised tab 926 Ø70 65 M Product Data

38 5. Dimensional drawings Indoor units *6=300 ART CL Mirror No Part Name Remark Front panel Display & signal receiver Air suction grille Knockout hole Installation plate Note 76, Seongsan-dong, Changwon City, Gyeongnam, , Korea CHASSIS CDE: SE R Unit should be installed in compliance with the installation manual in the product box. 2. Unit shall be grounded in accordance with the local regulations or applicable national codes. 3. The Unit is powered from the outdoor unit. Therefore power cable should be connected with the outdoor unit Product Data 37

39 5. Dimensional drawings Indoor units Ø Ø ART CL Mirror 4 No Part Name Front panel Display & signal receiver Air suction grille Knockout hole Remark Note 1. The unit should not be installed in a closed area. 2. In an area or space having no proper circulation, an air guide should be installed on the outdoor side. 76, Seongsan-dong, Changwon City, Gyeongnam, , Korea CHASSIS CDE: S Product Data

40 5. Dimensional drawings utdoor units 5.2 utdoor Units Product Data 39

41 5. Dimensional drawings utdoor units Product Data

42 5. Dimensional drawings utdoor units TL CDE : UE ÿ Product Data 41

43 5. Dimensional drawings utdoor units Part Name Remark TL CDE : UE Product Data

44 6.1 Indoor units 6. Wiring diagrams Indoor Unit Models: AS-W096E1G0, AS-W0964GG1, AS-W126E1G0, AS-W1264GG1,AS-W1865GG1, AS-W2465DH2 Models: AS-W096F1G2, AS-W096F*G2, AS-W126F*G Product Data 43

45 6. Wiring diagrams Indoor Unit Models: AS-W096U*H1, AS-W126U*H1, AS-W1863*H3 Models: AS-W096E*H2, AS-W126E*H2, AS-W126F1G Product Data

46 6. Wiring diagrams Indoor Unit Models: AS-W096ADR0, AS-W126ADR Product Data 45

47 6. Wiring diagrams Indoor Unit Models: AS-W1865DH2 CN_L/R(BL) CN_U/D(WH) CN_HVB(BL) CN_DISP2(BL) CN_DISP1(WH) CN_MTR1 CN_TH1 CN_TH Product Data

48 6. Wiring diagrams Indoor Unit Models: AS-W1868*H1 Models: AS-W2463*H Product Data 47

49 6. Wiring diagrams Indoor Unit Models: AS-W2468*H Product Data

50 6. Wiring diagrams Indoor Unit Models:AS-W306DGM0,AS-W366DGM0 CN-MTR1 CN-U/D(WH) CN-DISP2(BL) CN-L/R(BL) CN-HVB CN-12V CN-DISP1(WH) CN-TH1 CN-TH Product Data 49

51 6. Wiring diagrams utdoor units 6.2 utdoor units Models: AS-W096E1G0, AS-W096U*H1, AS-W126E1G0, AS-W126U*H1AS-W096E*H2, AS-W126E*H2, AS-W096F1G2, AS-W096F*G2, AS-W126F1G2, AS-W126F*G2 Models: AS-W0964GG1, AS-W1264GG Product Data

52 6. Wiring diagrams utdoor units Models: AS-W096ADR0, AS-W126ADR Product Data 51

53 6. Wiring diagrams utdoor units Models: AS-W1865DH2 CN_FAN(A) CN_4WAY CN_CIL1 CN_CIL2 CN_TH3 (SUC/DIS_I) CN_LEV1 CN_TH2 (AIR/PIPE) CN_CM Product Data

54 6. Wiring diagrams utdoor units Models: AS-W1865GG1, AS-W1863*H3 Models: AS-W1868*H Product Data 53

55 6. Wiring diagrams utdoor units Models: AS-W2463*H3 Models: AS-W2468*H1, AS-W2465DH Product Data

56 6. Wiring diagrams utdoor units Models: AS-W306DGM0 CN-PFC-UT CN-PFC-IN CN 4WAY CN_H/P CN_TH3 CN-TH2 CN-MTR1 CN_LEV1 CN_CM 2008 Product Data 55

57 6. Wiring diagrams utdoor units Models: AS-W366DGM0 CN-PFC-UT CN-PFC-IN CN 4WAY CN_H/P CN_TH3 CN-TH2 CN-MTR1 CN-MTR2 CN_LEV1 CN_CM Product Data

58 7. Refrigerant cycle diagram Model No : AS-W096U*H1, AS-W126U*H1, AS-W1865GG1, AS-W1863*H3, AS-W2463*H3 Indoor Unit utdoor Unit Liquid Side CHECK VALVE Th2 3-Way Valve Th1 Heat Exchanger (Evaporator) CAPILLARY TUBE Heat Exchanger (Condenser) Th4 Th3 Gas Side 3-Way Valve Accumulator Reversing Valve Compressor Cooling Heating N.B. : - Th1 = Thermistor foor sansing indoor air temperature. Th2 = Thermistor for sensing evaporating temperature. Th3 = Thermistor foor sansing outdoor air temperature. Th4 = Thermistor foor sansing evaporating temperature Product Data 57

59 7. Refrigerant cycle diagram Model no: AS-W096ADR0,AS-W0964GG1, AS-W096E*H2, AS-W096F1G2, AS-W096F*G2, AS-W096E1G0, AS-W126E1G0, AS-W126ADR0, AS-W126E*H2, AS-W126F1G2, AS-W126F*G2, AS-W1264GG1 Indoor Unit utdoor Unit Liquid Side Th2 2-Way Valve EEV Th1 Heat Exchanger (Evaporator) Heat Exchanger (Condenser) Th5 Th4 Gas Side 3-Way Valve Accumulator Compressor Th3 Cooling Heating LC. Description PCB Connector Th1 Thermistor for indoor air temperature CN-TH1(INDR) Th2 Thermistor for evaporating temperature CN-TH1(INDR) Th3 Thermistor for discharge pipe temperature CN-D_PIPE(UTDR) Th4 Thermistor for condensing temperature CN-TH1(UTDR) Th5 Thermistor for outdoor air temperature CN-TH1(UTDR) Product Data

60 7. Refrigerant cycle diagram Model no: AS-W1865DH2, AS-W1868*H1 Indoor Unit utdoor Unit Liquid Side Th2 2-Way Valve EEV Th5 Th1 Heat Exchanger (Evaporator) Heat Exchanger (Condenser) Th3 Th4 Gas Side 3-Way Valve Th7 Reversing Valve Th6 Compressor Cooling Heating LC. Description PCB Connector Th1 Thermistor for indoor air temperature Th2 Thermister for indoor pipe(in) temperature CN_TH1(INDR) Th3 Thermister for indoor pipe(out) temperature CN_TH2(INDR) Th4 Thermistor for outdoor air temperature Th5 Thermister for outdoor pipe temperature CN_TH2(UTDR) Th6 Thermistor for discharge pipe temperature Th7 Thermistor for suction pipe temperature CN_TH3(UTDR) 2008 Product Data 59

61 7. Refrigerant cycle diagram Model no: AS-W2468*H1, AS-W2465DH2 Indoor Unit utdoor Unit Liquid Side Th2 3-Way Valve EEV Th5 Th1 Heat Exchanger (Evaporator) Heat Exchanger (Condenser) Th3 Th4 Gas Side 3-Way Valve Th7 Reversing Valve Th6 Compressor Cooling Heating LC. Description PCB Connector Th1 Thermistor for indoor air temperature Th2 Thermister for indoor pipe(in) temperature CN_TH1(INDR) Th3 Thermister for indoor pipe(out) temperature CN_TH2(INDR) Th4 Thermistor for outdoor air temperature Th5 Thermister for outdoor pipe temperature CN_TH2(UTDR) Th6 Thermistor for discharge pipe temperature Th7 Thermistor for suction pipe temperature CN_TH3(UTDR) Product Data

62 7. Refrigerant cycle diagram Model no: AS-W306DGM0, AS-W366DGM0 Indoor Unit utdoor Unit Liquid Side Reversing Valve Th3 3-Way Valve Th7 Th5 Th1 Heat Exchanger (Evaporator) Accumulator High Pressure S/W Th6 Heat Exchanger (Condenser) Th2 Gas Side EEV Inverter Compressor Th4 3-Way Valve Cooling Heating LC. Description PCB Connector Th1 Thermister for indoor air temperature Th2 Thermister for indoor pipe(in) temperature CN_TH1(INDR) Th3 Thermister for indoor pipe(out) temperature CN-TH2(INDR) Th4 Thermister for outdoor pipe temperature Th5 Thermister for outdoor air temperature CN_TH2(UTDR) Th6 Thermister for outdoor discharge pipe temperature(inverter) Th7 Thermister for outdoor suction pipe temperature(inverter) CN_TH3(UTDR) 2008 Product Data 61

63 8. Capacity tables Cooling 8.1 Cooling Capacity AS-W096ADR0 Indoor Air Temperature utdoor Air Temperature : CDB CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W096E*H2 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) Product Data

64 8. Capacity tables Cooling AS-W096F1G2, AS-W096F*G2 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W096U*H1 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) 2008 Product Data 63

65 8. Capacity tables Cooling AS-W0964GG1 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W126ADR0 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) Product Data

66 8. Capacity tables Cooling AS-W126E1G0, AS-W126E*H2 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W126F1G2, AS-W126F*G2 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) 2008 Product Data 65

67 8. Capacity tables Cooling AS-W126U*H1 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W1264GG1 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) Product Data

68 8. Capacity tables Cooling AS-W1863*H3 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W1865DH2 Indoor Air Temperature utdoor Air Temperature : CDB CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) 2008 Product Data 67

69 8. Capacity tables Cooling AS-W1865GG1 Indoor Air utdoor Air Temperature : CDBB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W1868*H1 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) Product Data

70 8. Capacity tables Cooling AS-W2463*H3 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W2465DH2 Indoor Air Temperature utdoor Air Temperature : CDB CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) 2008 Product Data 69

71 8. Capacity tables Cooling AS-W2468*H1 Indoor Air Temperature utdoor Air Temperature : CDB CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI AS-W306DGM0 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) Product Data

72 8. Capacity tables Cooling AS-W366DGM0 Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Indoor Air utdoor Air Temperature : CDB Temperature CWB CDB TC SHC PI TC SHC PI TC SHC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) 2008 Product Data 71

73 8. Capacity tables Heating 8.2 Heating Capacity AS-W096ADR0, AS-W096E*H2 Indoor Air Temperature ( C) CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI Indoor Air Temperature ( C) Product Data utdoor Air Temperature : CWB AS-W096F1G2, AS-W096F*G2 utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W096U*H1 Indoor Air Temperature ( C) utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W0964GG1 Indoor Air Temperature ( C) utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) - utdoor air : 85%RH. However, the condition on nominal capacity is 7 CDB/6 CWB

74 8. Capacity tables Heating AS-W126ADR0, AS-W126E1G0, AS-W126E*H2 Indoor Air Temperature ( C) CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W1264GG1 Indoor Air Temperature ( C) utdoor Air Temperature : CWB AS-W126F1G2, AS-W126F*G2 Indoor Air Temperature ( C) CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W126U*H1 Indoor Air Temperature ( C) utdoor Air Temperature : CWB utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) - utdoor air : 85%RH. However, the condition on nominal capacity is 7 CDB/6 CWB 2008 Product Data 73

75 8. Capacity tables Heating AS-W1868*H1 Indoor Air Temperature ( C) CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W1863*H3 Indoor Air Temperature ( C) CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W1865DH2 Indoor Air Temperature ( C) Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) - utdoor air : 85%RH. However, the condition on nominal capacity is 7 CDB/6 CWB Product Data utdoor Air Temperature : CWB utdoor Air Temperature : CWB utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W1865GG1 Indoor Air Temperature ( C) utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI

76 8. Capacity tables Heating AS-W2463*H3 Indoor Air Temperature ( C) AS-W2465DH2 Indoor Air Temperature ( C) CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI AS-W2468*H1 Indoor Air Temperature ( C) AS-W306DGM0 utdoor Air Temperature : CWB utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI Indoor Air Temperature ( C) utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) - utdoor air : 85%RH. However, the condition on nominal capacity is 7 CDB/6 CWB 2008 Product Data 75

77 8. Capacity tables Heating AS-W366DGM0 Indoor Air Temperature ( C) utdoor Air Temperature : CWB CDB TC PI TC PI TC PI TC PI TC PI TC PI TC PI Symbol Notes AFR : Air flow rate [m 3 /min] 1. All capacities are net, evaporator fan motor heat is deducted. DB : Dry bulb temperature [ C] 2. Indicates nominal maximum capacity. WB : Wet bulb temperature [ C] 3. Direct interpolation is permissible. Do not extrapolate TC : Total capacity [kw] 4. Capacities are based on the following conditions: SHC : Sensible capacity [kw] - Interconnecting Piping Length 7.5m PI : Power Input [kw] - Level Difference of Zero. (Comp.+ indoor fan motor+outdoor fan motor) - utdoor air : 85%RH. However, the condition on nominal capacity is 7 CDB/6 CWB Product Data

78 9. Capacity coefficient factor Cooling 100 Capacity(%) 90 9k/12k/18k 24k 30k/36k Total Pipe Length(m) Heating Capacity(%) k/12k/18k 24k 30k/36k Total Pipe Length(m) 2008 Product Data 77

79 9. Capacity coefficient factor Indoor unit B Model No. Max. Pipe Max. Elevation Additional Length(m) (m) Refrigerant[g/m(oz/ft)] AS-W096ADR (0.22) AS-W0964GG (0.22) AS-W096E*H (0.22) AS-W096E1G (0.22) AS-W096F*G (0.22) AS-W096F1G (0.22) AS-W096U*H (0.22) AS-W126ADR (0.22) AS-W1264GG (0.22) AS-W126E*H (0.22) AS-W126E1G (0.22) AS-W126F*G (0.22) AS-W126F1G (0.22) AS-W126U*H (0.22) AS-W1863*H (0.22) AS-W1865DH (0.22) AS-W1865GG (0.22) AS-W1868*H (0.22) AS-W2463*H (0.32) AS-W2465DH (0.32) AS-W2468*H (0.32) AS-W306DGM (0.32) AS-W366DGM (0.37) A utdoor unit Indoor unit A utdoor unit B il trap Indoor unit CAUTIN: Capacity is based on standard length and maximum allowance length is on the basis of reliability. il trap should be installed every 5~7 meters. Notes Equivalent pipe length = actual pipe length + number of band x 0.3 Additional Refrigerant Charge Example: For Model No. AS-W126ADR0 having 15m pipe length, additional refrigerant to be charged is (15-7) x 20 = 160g * Refer to the specification for the maximum pipe length of each model. * 18k S5/S8 Chassis total piping length is 15m. A utdoor unit B If piping length is more than 5m Product Data

80 10. peration range Cooling Heating perative utdoor Unit [ C DB] Continuous operation utdoor Unit [ C DB] 24 Warming up peration Continuous operation perative Indoor Unit [ C DB] Indoor Unit [ C DB] perative: Intermittent operation due to the operational conditions (indoor/outdoor temperature, humidity, load etc.) can cause the heating capacity to decrease Product Data 79

81 11. Air flow and temperature distributions(reference data) General Wall Mouted 9kBtu/h Cooling Discharge angle:45 Air velocity [m/s] 2.7m Heating Discharge angle:50 Air velocity [m/s] 2.7m 5m 4m 3m 2m m 1.0 2m 1m 0m 0m 5m 4m 3m 0.5 2m m m 1m 0m 0m Temperature [ C] 2.7m Temperature [ C] 2.7m 2m 2m 23 1m 28 1m 5m 4m m 2m 1m 0m 0m 5m 4m 3m m 1m 0m 0m ART CL Deluxe 9kBtu/h Cooling Discharge angle:45 Air velocity [m/s] 2.7m Heating Discharge angle:50 Air velocity [m/s] 2.7m 5m 4m 3m 2m m 1.0 2m 1m 0m 0m 5m 4m 3m 0.5 2m m m 1m 0m 0m Temperature [ C] 2.7m Temperature [ C] 2.7m 2m 2m 23 1m 28 1m 5m 4m m 2m 1m 0m 0m 5m 4m 3m m 1m 0m 0m Product Data

82 11. Air flow and temperature distributions(reference data) ART CL Deluxe 12kBtu/h Cooling Discharge angle:45 Heating Discharge angle:50 Air velocity [m/s] 2.7m Air velocity [m/s] 2.7m 2m 2m 1.2 5m 4m 3m 2m m 1m 0m 0m 5m 4m 3m 2m m 1m 0m 0m Temperature [ C] 2.7m Temperature [ C] 2.7m 2m 2m 23 1m 30 1m 5m 4m 3m 25 2m 24 1m 0m 0m 5m 4m 3m 28 2m 29 1m 0m 0m ART CL Standard 12kBtu/h Cooling Discharge angle:45 Air velocity [m/s] 2.7m Heating Discharge angle:45 Air velocity [m/s] 2.7m 2m 2m 1.2 5m 4m 3m 2m m 1m 0m 0m 5m 4m 3m 2m m 1m 0m 0m Temperature [ C] 2.7m Temperature [ C] 2.7m 2m 2m 23 1m 30 1m 5m 4m 3m 25 2m 24 1m 0m 0m 5m 4m 3m 28 2m 29 1m 0m 0m 2008 Product Data 81

83 11. Air flow and temperature distributions(reference data) General Wall Mouted 12kBtu/h Cooling Discharge angle:45 Heating Discharge angle:50 Air velocity [m/s] 2.7m Air velocity [m/s] 2.7m 2m 2m 5m 4m 3m 0.5 2m m m 0m 0m 5m 4m 3m 0.5 2m m m 0m 0m Temperature [ C] 2.7m Temperature [ C] 2.7m 2m 2m 23 1m 30 1m 5m 4m m 2m 1m 0m 0m 5m 4m 28 3m 2m 29 1m 0m 0m General Wall Mouted 18kBtu/h Cooling Discharge angle:45 Air velocity [m/s] 2.7m Heating Discharge angle:50 Air velocity [m/s] 2.7m 2m 2m 8m 7m 6m 5m 4m 0.5 3m m 1m 0m 1m 8m 7m 6m 5m 4m 0.5 3m m 1.5 1m m 0m Temperature [ C] 2.7m Temperature [ C] 2.7m 2m 2m 23 1m 31 1m 8m 7m 6m 5m m 3m 2m 1m 0m 8m 7m 6m 5m m 3m 2m 1m 0m Product Data

84 12. Sound levels 12.1 Indoor Units verall 1m 0.8m Microphone Notes: - Sound measured at 1m away from the center of the unit. - Data is valid at free field condition. - Data is valid at nominal operation condition. - Reference accoustic pressure 0dB=20µPa. - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed. - The operating conditions are assumed to be standard. Model AS-W096ADR0 AS-W0964GG1 AS-W096E*H2 AS-W096E1G0 AS-W096F*G2 AS-W096F1G2 AS-W096U*H1 AS-W126ADR0 AS-W1264GG1 AS-W126E*H2 AS-W126E1G0 AS-W126F*G2 AS-W126F1G2 AS-W126U*H1 Sound Levels [db(a)] H M L Model AS-W1863*H3 AS-W1865DH2 AS-W1865GG1 AS-W1868*H1 AS-W2463*H3 AS-W2465DH2 AS-W2468*H1 AS-W306DGM0 AS-W366DGM0 Sound Levels [db(a)] H M L Sound Pressure Level 80 AS-W096ADR0 80 AS-W096ADR0 80 AS-W096E1G0 AS-W096E*H2 70 High Middle Low 70 High Middle Low 70 High Middle Low 60 NC NC NC-65 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 NC Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 80 AS-W096F1G2 AS-W096F*G NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) AS-W126ADR0 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 80 AS-W096U*H1 70 High Middle Low 70 High Middle Low 70 High Middle Low Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 2008 Product Data 83

85 12. Sound levels AS-W126E1G0 AS-W126E*H AS-W126F1G2 AS-W126F*G2 80 AS-W1264GG1 70 High Middle Low 70 High Middle Low 70 High Middle Low Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 80 AS-W126U*H1 80 AS-W1865DH2 AS-W1868*H1 80 AS-W1865GG1 AS-W1863*H3 70 High Middle Low 70 High Middle Low 70 High Middle Low Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC- 65 NC- 60 NC- 55 NC- 50 NC- 45 NC- 40 NC- 35 NC NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) NC- 25 Approximate NC- 20 Hearing Threshold NC ctave Band Center Frequency (Hz) AS-W2463*H3 AS-W2465DH2 AS-W2468*H High Middle Low 70 High Middle Low 70 High Middle Low Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) Product Data

86 12. Sound levels AS-W306DGM0 AS-W366DGM0 Sound Pressure Level (db re 20µPa ) Sound Pressure Level (db re 20µPa ) ctave Band Center Frequency (Hz) ctave Band Center Frequency (Hz) 2008 Product Data 85

87 12. Sound levels 12.2 utdoor Units verall 1m 1m Center of utdoor Unit Notes: - Sound measured at 1m away from the center of the unit. - Data is valid at free field condition. - Data is valid at nominal operation condition. - Reference accoustic pressure 0dB=20µPa. - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed. - The operating conditions are assumed to be standard. Model AS-W096ADR0 AS-W0964GG1 AS-W096E*H2 AS-W096E1G0 AS-W096F*G2 AS-W096F1G2 AS-W096U*H1 AS-W126ADR0 AS-W1264GG1 AS-W126E*H2 AS-W126E1G0 AS-W126F*G2 AS-W126F1G2 AS-W126U*H1 Sound Pressure Level 80 AS-W096ADR0 Sound Levels [db(a)] H Model AS-W1863*H3 AS-W1865DH2 AS-W1865GG1 AS-W1868*H1 AS-W2463*H3 AS-W2465DH2 AS-W2468*H1 AS-W306DGM0 AS-W366DGM0 AS-W096E1G0 AS-W096E*H2 AS-W096U*H1 80 Sound Levels [db(a)] H AS-W096F1G2 AS-W096F*G NC NC NC-65 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 80 AS-W0964GG1 80 AS-W126ADR0 AS-W126E1G0 AS-W126E*H NC NC NC-65 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC NC NC-25 Approximate NC-20 Hearing Threshold 10 NC ctave Band Center Frequency (Hz) Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) Product Data

88 12. Sound levels 80 AS-W126F1G2 AS-W126F*G2 AS-W126U*H1 80 AS-W1264GG1 80 AS-W1863*H NC NC NC-65 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 80 AS-W1868*H1 80 AS-W1865DH2 80 AS-W1865GG NC NC NC-65 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 80 AS-W2463*H3 80 AS-W2465DH2 80 AS-W2468*H NC NC NC-65 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30 Sound Pressure Level (db re 20µPa ) NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate Hearing NC-20 Threshold NC ctave Band Center Frequency (Hz) 20 NC-25 Approximate NC-20 Hearing Threshold NC ctave Band Center Frequency (Hz) 2008 Product Data 87

89 12. Sound levels AS-W306DGM0 AS-W366DGM0 Sound Pressure Level (db re 20µPa ) Sound Pressure Level (db re 20µPa ) ctave Band Center Frequency (Hz) ctave Band Center Frequency (Hz) Product Data

90 13. Remote controller Models: AS-W096E*H2/AS-W126E*H2/AS-W096F1G2/AS-W126F1G2/ AS-W096F*G2/AS-W126F*G2/AS-W1868*H1/AS-W2468*H1 The controls will look like the following peration Mode Cooling peration Auto peration or Auto Changeover Healthy Dehumidification peration Heating peration Air Circulation Signal transmitter Cooling Model( ), Heat Pump Model( ) N/FF BUTTN Used to turn off/on the unit. 2. PERATIN MDE SELECTIN BUTTN Used to select the operation mode. 3. RM TEMPERATURE SETTING BUTTNS Used to select the room temperature. 4. INDR FAN SPEED SELECTR BUTTN Used to select fan speed in four steps low, medium, high and CHAS. 5. JET CL BUTTN Used to start or stop the speed cooling. (It operates fan in super high speed in cooling mode) 6. CHAS SWING BUTTN Used to stop or start louver movement and set the desired up/down airflow direction. 7. TIMER AND TIME SETTING BUTTN Used to set the time of starting and stopping operation. 8. TIME SETTING BUTTNS Used to adjust the time. 9. TIMER SET / CLEAR BUTTN Used to set and to cancel the timer operation. 10. SLEEP MDE AUT BUTTN Used to set sleep mode auto operation. 11. RM TEMPERATURE CHECKING BUTTN Used to check the room temperature. 12. RESET BUTTN Used prior to resetting time. 13. AUT CLEAN BUTTN Used to set auto clean mode. 14. PLASMA BUTTN Used to start or stop the plasma-purification function. 15. CLEAR ALL BUTTN Used to cancel all timer setting. 16. ENERGY SAVING CLING BUTTN(PTINAL) Used to save Energy. 17. LCD LUMINSITY BUTTN(PTINAL) Used to adjust LCD luminosity. 18. HRIZNTAL AIRFLW DIRECTIN CNTRL BUTTN (PTINAL) Used to set the desired horizontal airflow direction Product Data 89

91 13. Remote controller Models: AS-W096ADR0/AS-W126ADR0 The controls will look like the following peration Mode Cooling peration Auto peration or Auto Changeover Healthy Dehumidification peration Heating peration Air Circulation Signal transmitter Cooling Model( ), Heat Pump Model( ) N/FF BUTTN Used to turn off/on the unit. 2. PERATIN MDE SELECTIN BUTTN Used to select the operation mode. 3. RM TEMPERATURE SETTING BUTTNS Used to select the room temperature. 4. INDR FAN SPEED SELECTR BUTTN Used to select fan speed in four steps low, medium, high and CHAS. 5. JET CL BUTTN Used to start or stop the speed cooling. (It operates fan in super high speed in cooling mode) 6. CHAS SWING BUTTN Used to stop or start louver movement and set the desired up/down airflow direction. 7. TIMER AND TIME SETTING BUTTN Used to set the time of starting / stopping and sleeping operation 8. TIME SETTING BUTTNS Used to adjust the time. 9. TIMER SET / CLEAR BUTTN Used to set and to cancel the timer operation. 10. SLEEP MDE AUT BUTTN Used to set sleep mode auto operation. 11. RM TEMPERATURE CHECKING BUTTN Used to check the room temperature. 12. RESET BUTTN Used prior to resetting time. 13. FUNCTIN SETTING BUTTN Used to set auto clean and smart clean mode regularly. 14. SMART CLEAN BUTTN Used to start or stop the smart clean function. 15. CLEAR ALL BUTTN Used to cancel all timer setting. 16. ENERGY SAVING CLING BUTTN Used to save Energy. 17. LED LUMINSITY BUTTN Used to adjust bruch and display LED luminosity. 18. HRIZNTAL AIRFLW DIRECTIN CNTRL BUTTN Used to set the desired horizontal airflow direction Product Data

92 13. Remote controller Wireless Remote Controller The controls will look like the following peration Mode Cooling peration Auto peration or Auto Changeover Healthy Dehumidification peration Heating peration Signal transmitter Flip-up door (opened) Cooling Model( ), Heat Pump Model( ) NTE 1. START/STP BUTTN Used to turn off/on the unit. 2. PERATIN MDE SELECTIN BUTTN Used to select the operation mode. 3. RM TEMPERATURE SETTING BUTTNS Used to select the room temperature. 4. INDR FAN SPEED SELECTR BUTTN Used to select fan speed in four steps low, medium, high and CHAS. 5. JET CL BUTTN Used to start or stop the speed cooling. (It operates fan in super high speed in cooling mode) 6. CHAS SWING BUTTN Used to stop or start louver movement and set the desired up/down airflow direction. 7. N/FF TIMER BUTTNS Used to set the time of starting and stopping operation. 8. TIME SETTING BUTTNS Used to adjust the time. 9. TIMER SET/CANCEL BUTTN Used to set and to cancel the timer operation. 10. SLEEP MDE AUT BUTTN Used to set sleep mode auto operation. 11. AIR CIRCULATIN BUTTN(PTINAL) Used to circulate the room air without cooling or heating. ENERGY-SAVING CLING MDE BUTTN (PTINAL) For inverter type models 12. RM TEMPERATURE CHECKING BUTTN Used to check the room temperature. 13. PLASMA BUTTN(PTINAL) Used to start or stop the plasma-purification function. 14. HRIZNTAL AIRFLW DIRECTIN CNTRL BUTTN (PTINAL) Used to set the desired horizontal airflow direction. 15. RESET BUTTN Used prior to resetting time nd F BUTTN Used prior to using modes printed in blue at the bottom of buttons. 17. AUT CLEAN BUTTN(PTINAL) Used to set auto clean mode. In some models this button has a 2nd function of LED luminosity control. 18. HEATER BUTTN(PTINAL) (Not available in all models) 19. LCD LUMINSITY BUTTN(PTINAL) Used to adjust LCD luminosity. To use the functions printed in blue at the bottom of the buttons press 2 nd F button first and then the required function button. Pressing the 2 nd F button activates the blue printed function of the respective button. To cancel the function press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds Product Data 91

93 14. Installation Installation Map NTICE Installation parts you should purchase. Air Discarge Vertical Air deflector peration Indication Lamps Forced peration Button Saddle Air Inlet Vents Installation plate Sleeve Bushing-Sleeve Putty(Gum Type Sealant) Bend the pipe as closely on the wall as possible, but be careful that it doesn't break. Vinyl tape (Wide) Apply after carrying out a drainage test. To carry out the drainage test, remove the air filters and pour water into the heat exchanger. Air utlet Vents Base Plate Gas side piping (ptional Parts) Liquid side piping (ptional Parts) Additional drain pipe Vinyl tape (Narrow) Drain Hose Connecting cable (ptional Parts) Product Data

94 14. Installation Select the best Location Indoor unit 1. Do not have any heat or steam near the unit. 2. Select a place where there are no obstacles in front of the unit. 3. Make sure that condensation drainage can be conveniently routed away. 4. Do not install near a doorway. 5. Ensure that the interval between a wall and the left (or right) of the unit is more than 100mm. The unit should be installed as high as possible on the wall, allowing a minimum of 200mm from ceiling. 6. Use a metal detector to locate studs to prevent unnecessary damage to the wall. More than 100mm More than 2300mm More than 200mm More than 100mm Install the indoor unit on the wall where the height from the floor is more than 2.3 meters. utdoor unit 1. If an awning is built over the unit to prevent direct sunlight or rain exposure, make sure that heat radiation from the condenser is not restricted. 2. Ensure that the space around the back and sides is more than 300mm. The front of the unit should have more than 700mm of space. 3. Do not place animals and plants in the path of the warm air. 4. Take the weight of the air conditioner into account and select a place where noise and vibration are minimum. 5. Select a place where the warm air and noise from the air conditioner do not disturb neighbors. More than 300mm More than 700mm More than 600mm More than 300mm More than 600mm 2008 Product Data 93

95 14. Installation Fixing Installation Plate The wall you select should be strong and solid enough to prevent vibration 1. Mount the installation plate on the wall with type "A" screws. If mounting the unit on a concrete wall, use anchor bolts. Mount the installation plate horizontally by aligning the centerline using a level. Chassis Hook Installation Plate Type A 2. Measure the wall and mark the centerline. It is also important to use caution concerning the location of the installation plate-routing of the wiring to power outlets is through the walls typically. Drilling the hole through the wall for piping connections must be done safely. Drill a Hole in the Wall Drill the piping hole with a ø70mm hole core drill. Drill the piping hole at either the right or the left with the hole slightly slanted to the outdoor side. Indoor WALL utdoor 5-7mm (3/16"~5/16") Flaring Work Main cause for gas leakage is due to defect in flaring work. Carry out correct flaring work in the following procedure. Cut the pipes and the cable. 1. Use the piping kit accessory or the pipes purchased locally. 2. Measure the distance between the indoor and the outdoor unit. 3. Cut the pipes a little longer than measured distance. 4. Cut the cable 1.5m longer than the pipe length. Copper pipe 90 Slanted Uneven Rough Product Data

96 14. Installation Burrs removal 1. Completely remove all burrs from the cut cross section of pipe/tube. Pipe Reamer 2. Put the end of the copper tube/pipe in a downward direction as you remove burrs in order to avoid dropping burrs into the tubing. Point down Putting nut on Remove flare nuts attached to indoor and outdoor unit, then put them on pipe/tube having completed burr removal. (not possible to put them on after flaring work) Copper tube Flare nut Flaring work 1. Firmly hold copper pipe in a bar in the dimension shown in the table below. 2. Carry out flaring work with the flaring tool. Bar "A" Bar Handle Yoke Cone utside diameter A mm inch mm Ø6.35 1/4 1.1~1.3 Ø9.52 3/8 1.5~1.7 Ø12.7 1/2 1.6~1.8 Ø /8 1.6~1.8 Ø /4 1.9~2.1 Copper pipe Clamp handle Red arrow mark Check 1. Compare the flared work with the figure by. 2. If a flared section is defective, cut it off and do flaring work again. Smooth all round Inside is shiny without scratches = Improper flaring = Even length all round Inclined Surface Cracked Uneven damaged thickness 2008 Product Data 95

97 14. Installation Connecting the Piping Indoor 1. Prepare the indoor unit's piping and drain hose for installation through the wall. 2. Pull the plastic tubing cover(see the illustration by) and pull the tubing and drain hose away from chassis. 2 1 For right rear piping 1. Route the indoor tubing and the drain hose in the direction of rear right. 2. Insert the connecting cable into the indoor unit from the outdoor unit through the piping hole. Do not connect the cable to the indoor unit. Make a small loop with the cable for easy connection later. 3. Tape the tubing, drain hose, and the connecting cable. Be sure that the drain hose is located at the lowest side of the bundle. Locating at the uper side can cause drain pan to overflow inside the unit. Drain hose If the drain hose is routed inside the room, insulate the hose with an insulation material* so that dripping from "sweating"(condensation) will not damage furniture or floors. *Foamed polyethylene or equivalent is recommended. Tape Connecting pipe Drain hose Connecting cable 4. Indoor unit installation Hook the indoor unit onto the upper portion of the installation plate.(engage the hooks of the rear top of the indoor unit with the upper edge of the installation plate.) Ensure that the hooks are properly seated on the installation plate by moving it left and right. Connecting cable Drain hose Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound) Product Data

98 14. Installation For left rear piping 1. Route the indoor tubing and the drain hose to the required piping hole position. 2. Insert the piping, drain hose, and the connecting cable into the piping hole. 3. Insert the connecting cable into the indoor unit. Don't connect the cable to the indoor unit. Make a small loop with the cable for easy connection later. 4. Tape the drain hose and the connecting cables. 1 2 Drain pipe Connecting cable 5. Indoor unit installation Hang the indoor unit from the hooks at the top of the installation plate. Mount the tubing cover between the indoor unit and the installation plate and separate the bottom of the indoor unit from the wall. Connecting the piping to the indoor unit and drain hose to drain pipe. 1. Align the center of the pipes and sufficiently tighten the flare nut by hand. 2. Tighten the flare nut with a wrench. Indoor unit Tubing cover Installation plate 8cm Indoor unit tubing Flare nut Pipes utside diameter Torque mm inch kgf.m Ø6.35 1/4 1.8~2.5 Ø9.52 3/8 3.4~4.2 Ø12.7 1/2 5.5~6.6 Ø /8 6.3~8.2 Wrench Indoor unit tubing pen-end wrench (fixed) Flare nut Connection pipe 3. Mount the clamp on the boss with a type "B" screw.(optional) 4. When extending the drain hose at the indoor unit, install the drain pipe. Type "B" screw Clamp Boss Drain hose 2008 Product Data 97

99 14. Installation Wrap the insulation material around the connecting portion. 1. verlap the connection pipe insulation material and the indoor unit pipe insulation material. Bind them together with vinyl tape so that there may be no gap. Drain pipe Adhesive Indoor unit drain hose Vinyl tape(narrow) 2. Wrap the area which accommodates the rear piping housing section with vinyl tape. Insulation material 3. Bundle the piping and drain hose together by wrapping them with vinyl tape for enough to cover where they fit into the rear piping housing section. Connection pipe Vinyl tape (wide) Wrap with vinyl tape Connecting cable Indoor unit pipe Vinyl tape(narrow) Pipe Wrap with vinyl tape Pipe Drain hose Vinyl tape(wide) Reroute the pipings and the drain hose across the back of the chassis. Piping for passage through piping hole Indoor unit installation 1. Mount the tubing cover in the original positon. 2. Ensure that the hooks are properly seated on the installation plate by moving it left and right. 3. Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound). Connecting cable Drain hose Product Data

100 14. Installation Installation Information. For left piping. Follow the instruction below. Good case Press on the upper side of clamp and unfold the tubing to downward slowly. Bad case Following bending type from right to left may cause damage to the tubing Product Data 99

101 14. Installation utdoor Align the center of the pipings and sufficiently tighten the flare nut by hand. Finally, tighten the flare nut with torque wrench until the wrench clicks. When tightening the flare nut with torque wrench, ensure the direction for tightening follows the arrow on the wrench. utside diameter Torque mm inch kgf.m Ø6.35 1/4 1.8~2.5 Ø9.52 3/8 3.4~4.2 Ø12.7 1/2 5.5~6.5 Ø /8 6.3~8.2 Ø /4 9.9~12.1 utdoor unit Torque wrench Gas side piping (Bigger diameter) Liquid side piping (Smaller diameter) Product Data

102 14. Installation Connecting the Cables Indoor Connect the cable to the indoor unit by connecting the wires to the terminals on the control board individually according to the outdoor unit connection. (Ensure that the color of the wires of the outdoor unit and the terminal No. are the same as those of the indoor unit.) The circuit diagram is subject to change without notice. The earth wire should be longer than the common wires. When installing, refer to the circuit diagram on the front panel. Connect the wires firmly so that they may not be pulled out easily. Connect the wires according to color codes, referring to the wiring diagram. If a power plug is not used, provide a circuit breaker between power source and the unit as shown by. Main power source Air Conditioner Circuit Breaker Use a circuit breake or time delay fuse. The power cord connected to the Indoor unit should be selected according to the following specifications(type "B" approved by HAR or SAA). (mm 2 ) Grade NRMAL CRSS -SECTINAL AREA 9k~12k 12k SU / 18k 18k S3 / 24k~36k Cable Type(B) H05VV-F H05VV-F H05VV-F 45 ±5 10 ±3 The power connecting cable connecting the indoor and outdoor unit should be selected according to the following specifications (Type "B" approved by HAR or SAA). (mm 2 ) Grade NRMAL CRSS -SECTINAL AREA 9k S4 / 12k S4 9k~18k 18k S3 / 24k 30k~36k Cable Type(B) H07RN-F H07RN-F H07RN-F H07RN-F 45 ±5 10 ± Product Data 101

103 14. Installation utdoor 1. Remove the control cover from the unit by loosening the screw. Connect the wires to the terminals on the control board individually. 2. Secure the cable onto the control board with the cord clamp. 3. Refix the control cover to the original position with the screw. 4. Use a recognized circuit breaker between the power source and the unit. A disconnecting device to adequately disconnect all supply lines must be fitted. Cord clamp utdoor Unit 1(L) 2(N) 3 Connecting cable Cover control Circuit Breaker (A) Grade 9k~12k 18k S5 18k 24k 30k~36k According to the confirmation of the above conditions, prepare the wiring as follows. 1. Never fail to have an individual power circuit specifically for the air conditioner. As for the method of wiring, be guided by the circuit diagram posted on the inside of control cover. 2. The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could cause burn-out of the wires.) 3. Specification of power source. 4. Confirm that electrical capacity is sufficient. 5. See to that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 6. Confirm that the cable thickness is as specified in the power source specification. (Particularly note the relation between cable length and thickness. 7. Always install an earth leakage circuit breaker in a wet or moist area. 8. The following would be caused by voltage drop. Vibration of a magnetic switch, which will damage the contact point, fuse breaking, disturbance of the normal function of the overload. 9. The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air gap contact separation of at least 3mm in each active(phase) conductors Product Data

104 14. Installation Checking the Drainage To check the drainage. 1. Pour a glass of water on the evaporator. 2. Ensure the water flows through the drain hose of the indoor unit without any leakage and goes out the drain exit. Connecting area drain hose Leakage checking Drain piping 1. The drain hose should point downward for easy drain flow. Downward slope 2. Do not make drain piping like the following. Do not raise Accumulated drain water Air Tip of drain hose dipped in water Less than 50mm gap Water leakage Water leakage Waving Water leakage Ditch 2008 Product Data 103

105 14. Installation Forming the Piping Form the piping by wrapping the connecting portion of the indoor unit with insulation material and secure it with two kinds of vinyl tapes. If you want to connect an additional drain hose, the end of the drain outlet should be routed above the ground. Secure the drain hose appropriately. In cases where the outdoor unit is installed below the indoor unit perform the following. 1. Tape the piping, drain hose and connecting cable from down to up. 2. Secure the tapped piping along the exterior wall using saddle or equivalent. Drain hose Pipe Vinyl tape(narrow) Wrap with vinyl tape(wide) In cases where the utdoor unit is installed above the Indoor unit perform the following. 1. Tape the piping and connecting cable from down to up. 2. Secure the taped piping along the exterior wall. Form a trap to prevent water entering the room. 3. Fix the piping onto the wall by saddle or equivalent Product Data

106 14. Installation Air Purging Air purging The air and moisture remaining in the refrigerant system have undesirable effects as indicated below. 1. Pressure in the system rises. 2. perating current rises. 3. Cooling(or heating) efficiency drops. 4. Moisture in the refrigerant circuit may freeze and block capillary tubing. 5. Water may lead to corrosion of parts in the refrigeration system. Therefore, after evacuating the system, take a leak test for the piping and tubing between the indoor and outdoor unit. Air purging with vacuum pump 1. Preparation Check that each tube(both liquid and gas side tubes) between the indoor and outdoor units have been properly connected and all wiring for the test run has been completed. Remove the service valve caps from both the gas and the liquid side on the outdoor unit. Note that both the liquid and the gas side service valves on the outdoor unit are kept closed at this stage. 2. Leak test Connect the manifold valve(with pressure gauges) and dry nitrogen gas cylinder to this service port with charge hoses. Be sure to use a manifold valve for air purging. If it is not available, use a stop valve for this purpose. The "Hi" knob of the manifold valve must always be kept close. Pressurize the system to no more than 150 P.S.I.G. with dry nitrogen gas and close the cylinder valve when the gauge reading reached 150 P.S.I.G. Next, test for leaks with liquid soap. To avoid nitrogen entering the refrigerant system in a liquid state, the top of the cylinder must be higher than its bottom when you pressurize the system. Usually, the cylinder is used in a vertical standing position. 1. Do a leak test of all joints of the tubing(both indoor and outdoor) and both gas and liquid side service valves. Bubbles indicate a leak. Be sure to wipe off the soap with a clean cloth. 2. After the system is found to be free of leaks, relieve the nitrogen pressure by loosening the charge hose connector at the nitrogen cylinder. When the system pressure is reduced to normal, disconnect the hose from the cylinder. Indoor unit Manifold valve Pressure gauge Charge hose Lo Hi Nitrogen gas cylinder(in vertical standing position) utdoor unit 2008 Product Data 105

107 14. Installation Soap water method 1. Remove the caps from the 2-way and 3-way valves. 2. Remove the service-port cap from the 3-way valve. 3. To open the 2-way valve turn the valve stem counterclockwise approximately 90, wait for about 2~3 sec, and close it. 4. Apply a soap water or a liquid neutral detergent on the indoor unit connection or outdoor unit connections by a soft brush to check for leakage of the connecting points of the piping. 5. If bubbles come out, the pipes have leakage Evacuation 1. Connect the charge hose end described in the preceding steps to the vacuum pump to evacuate the tubing and indoor unit. Confirm the "Lo" knob of the manifold valve is open. Then, run the vacuum pump. The operation time for evacuation varies with tubing length and capacity of the pump. The following table shows the time required for evacuation. Required time for evacuation when 30 gal/h vacuum pump is used If tubing length is less than 10m (33 ft) If tubing length is longer than 10m (33 ft) 10 min. or more 15 min. or more Gas side 2-way valve (pen) 3-way valve (Close) Indoor unit Liquid side Hexagonal wrench Cap 2. When the desired vacuum is reached, close the "Lo" knob of the manifold valve and stop the vacuum pump. Finishing the job 1. With a service valve wrench, turn the valve stem of liquid side valve counter-clockwise to fully open the valve. 2. Turn the valve stem of gas side valve counter-clockwise to fully open the valve. 3. Loosen the charge hose connected to the gas side service port slightly to release the pressure, then remove the hose. 4. Replace the flare nut and its bonnet on the gas side service port and fasten the flare nut securely with an adjustable wrench. This process is very important to prevent leakage from the system. 5. Replace the valve caps at both gas and liquid side service valves and fasten them tight. This completes air purging with a vacuum pump. The air conditioner is now ready to test run. Pressure gauge utdoor unit pen Manifold valve Lo Hi Vacuum pump Close Product Data

108 14. Installation Test Running 1. Check that all tubing and wiring are properly connected. 2. Check that the gas and liquid side service valves are fully open. Prepare remote controller 1. Remove the battery cover by pulling it according to the arrow direction. 2. Insert new batteries making sure that the (+) and ( ) of battery are installed correctly. 3. Reattach the cover by pushing it back into position. NTICE Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries. Remove the batteries from the remote controller if the system is not used for a long time. Settlement of outdoor unit 1. Anchor the outdoor unit with a bolt and nut(ø10mm) tightly and horizontally on a concrete or rigid mount. 2. When installing on the wall, roof or rooftop, anchor the mounting base securely with a nail or wire assuming the influence of wind and earthquake. 3. If the vibration of the unit is transmitted to the hose, secure the unit with an anti-vibration rubber. Bolt Tubing connection Evaluation of the performance perate the unit for 15~20 minutes, then check the system refrigerant charge: 1. Measure the pressure of the gas side service valve. 2. Measure the temperature of the intake and discharge of air. 3. Ensure the difference between the intake temperature and the discharge is more than 8 C 4. For reference; the gas side pressure of optimum condition is as below.(cooling) The air conditioner is now ready for use. Discharge air Intake temperature Discharge temperature Refrigerant utside ambient The pressure of the gas side TEMP. service valve. R410A 35 C (95 F) 8.5~9.5kg/cm 2 G(120~135 P.S.I.G.) 2008 Product Data 107

109 14. Installation NTICE If the actual pressure is higher than shown, the system is most likely over-charged, and charge should be removed. If the actual pressure are lower than shown, the system is most likely undercharged, and charge should be added. PUMP DWN This is performed when the unit is relocated or the refrigerant circuit is serviced. Pump Down means collecting all refrigerant into the outdoor unit without the loss of refrigerant. Be sure to perform Pump Down procedure in the cooling mode. Pump Down Procedure 1. Connect a low-pressure gauge manifold hose to the charge port on the gas side service valve. 2. pen the gas side service valve halfway and purge the air in the manifold hose using the refrigerant. 3. Close the liquid side service valve(all the way). 4. Turn on the unit's operating switch and start the cooling operation. 5. When the low-pressure gauge reading becomes 1 to 0.5kg/cm 2 G(14.2 to 7.1 P.S.I.G.), fully close the gas side valve and then quickly turn off the unit. Now Pump Down procedure is completed, and all refrigerant is collected into the outdoor unit Product Data

110 14. Installation Installation Guide at the Seaside CAUTIN 1. Air conditioners should not be installed in areas where corrosive gases, such as acid or alkaline gas, are produced. 2. Do not install the product where it could be exposed to sea wind (salty wind) directly. It can result corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient performance. 3. If outdoor unit is installed close to the seaside, it should avoid direct exposure to the sea wind. therwise it needs additional anticorrosion treatment on the heat exchanger. Selecting the location(utdoor Unit) 1) If the outdoor unit is to be installed close to the seaside, direct exposure to the sea wind should be avoided. Install the outdoor unit on the opposite side of the sea wind direction. Sea wind Sea wind 2) In case, to install the outdoor unit on the seaside, set up a windbreak not to be exposed to the sea wind. Windbreak Sea wind It should be strong enough like concrete to prevent the sea wind from the sea. The height and width should be more than 150% of the outdoor unit. It should be keep more than 70 cm of space between outdoor unit and the windbreak for easy air flow. 3) Select a well-drained place. 1. If you can t meet above guide line in the seaside installation, please contact LG Electronics for the additional anticorrosion treatment. 2. Periodic ( more than once/year ) cleaning of the dust or salt particles stuck on the heat exchanger by using water 2008 Product Data 109

111 P/No.: 3828A20892L Air Conditioner 20 Yeouido-dong, Yeongdeungpo-gu, Yeouido P..Box 335 Seoul, , Korea. All rights reserved Printed in Korea Mar./2008 The specifications, designs, and information in this brochure are subject to change without notice. File No. : A8974 Volume:1 Certificate No. : E00626/1 The air conditioners manufactured by LG have received IS9001 certificate for quality assurance and IS14001 certificate for environmental management system.