700 Watts. 15 minutes. Usable Capacity 1250 ml ml ml. 300 ml. Size 2.3 Litre 2 Litre 1.2 Litre ½ Litre. (3,000 RPM to 5,000 RPM approx).

Transcription

1 700 Watts 15 minutes. (3,000 RPM to 5,000 RPM approx). (11,000 RPM to 18,000 RPM approx). Size 2.3 Litre 2 Litre 1.2 Litre ½ Litre Usable Capacity 1250 ml ml ml. 300 ml. Dealers List after Sales Service 24 Warranty Card Back Cover

2 P l a c e t h e cover, lock it clockwise direction. (Stem) The drive shaft has to be placed in the bowl, over which the disc blade holder is placed. It is used only for positioning of disc blade holder. 2.3 Litre (1.2 Litre liquids) and is used Chopper Blade There are 2 feeder tubes that can be used depending on the size of vegetable being processed. While slicing we get thick slices by putting extra pressure on this pusher.

3 foods like cake 15. It comes with a universal fixed blade suitable for wet and dry grinding. Slicing Blade The Slicing Blade is use to slice vegetable evenly. this blade is ideal for slicing carrot, cucumber & potato and is generally used to make beautiful looking salads. 16. This jar is used for small quantity grinding such as chutney, pepper, masalas, coffee beans etc. It has a fixed blade with a plastic dome cover Thick Shredding Blade This blade is used to shred vegetables in to thick shreds which is ideal for salads Thin Shredding Blade This blade is used to grate / shred vegetables in to thin shreds which is ideal for halwa & mithais. 14. Liquidiser Jar It is suitable for liquidising, Blending and Mixing Foods. 18.

4 19. Centrifugal Juicer Attachment The centrifugal juicer is fixed on the food processing bowl. This juicer is used to extract juice from hard fruits & vegetables such as carrots, karela, apples etc. It contains the following parts :- a) Cover With Pusher It is used to introduce the fruits into the centrifugal juicer. For Users Within India CONNECTIONS The Food Processor works on 240V AC, 50 Hz and is equipped with a 5 amps., three-pin plug. Make sure the wall socket you use in your domestic power supply is also equipped with a three-pin socket. Important WARNING : THIS APPLIANCE MUST BE EARTHED The wires in the mains lead are coloured in accordance with the following code. : ( ) Green : Earth Black : Neutral (N) Red : Live ( L) b) Juicer Net It is used to strain the juice from the pulp. For Users Outside India WORKING ON LOCAL DOMESTIC POWER SUPPLY V AC, 50 Hz. Important As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows : c) Juicer Blade It performs the function of extracting juice from hard fruits & vegetables. The wire which is coloured green must be connected to the terminal in the plug which is marked with the letter 'E' or by the earth symbol or coloured green or green-and-yellow. The wire which is coloured black must be connected to the terminal which is marked with the letter 'N' or coloured black. The wire which is coloured red must be connected to the terminal which is marked with the letter 'L' or coloured red. 6 7

5 HOW TO ASSEMBLE & OPERATE YOUR FOOD PROCESSOR 1. Hold the bowl by the handle & lower it on the food processor side of the unit. Turn the bowl in an clockwise direction till the bowl locks in place. Please ensure that the lug of the bowl precisely fits into the slot on the grinder unit. 2. Select the blade accessory as required. Fit the blade in blade holder, by pressing the required blade into the blade holder disc. Put the blade holder on the stem. Then Place the stem in the processor Bowl. 3. Cover the food processor bowl with the bowl cover. Turn the cover in a clockwise Disc Blade Assembly direction, to lock with the click sound. Please ensure that the bowl cover fits perfectly into the slot provided on the grinder unit. If it is not fitted properly the safety switch will not come on and food processor will not start. 4. Place the safety cover of the mixer portion on the grinder unit & lock it in clockwise direction. This will activate another safety switch. If not properly locked the switch will not function & the motor will not start. 5. Plug in the food processor to a wall AC outlet socket. Your food processor is now ready for use. 6. To open the food processor bowl, press the locking button on top of the food processor near the safety cover and turn the bowl cover in a anticlock wise direction. Disassemble in the reverse away as shown above. S.S. Blade Assembly HOW TO ASSEMBLE & OPERATE YOUR MIXER GRINDER Select the jar you want to use. 1. Fill the jar up to the blade level for mini -mum quantity of grinding. Cover the jar with the dome. 2. Place the jar in the top casing of the grinder unit on the mixer side. Ensure that the locking wedge provided at the base of the jar fits snugly in the groove provided in the top casing. 3. Lock the jar in place by turning it in a clockwise direction. This will activate the second safety switch of the mixer. 4. Fix the food processor bowl and cover as shown in the steps above. Do not put any blades/discs or any attachments on the food processor side. Ensure that the safety switch is activated on the food processor side by locking the cover of the food processor bowl in the clockwise direction. 5. With both the grinder jar and food processor bowl locked in place, switch on the grinder unit, first at low speed gradually increasing to the speed required for the operation. Grinding Jar & Chutney Jar Before grinding all ingredients must be thoroughly dried and if necessary, should be put in the oven for a short while so that all the moisture gets evaporated. The jar should be filled at least up to blade level. For larger quantities of dry grinding the jar should not be filled more than 3/4th of its capacity. 8 9

6 For fine grinding, grind the material & sieve the ground substance through a fine nylon sieve to the consistency required. The left-overs can then be put in the mixer, re-ground and then sieved again. While grinding hard substances like turmeric (haldi), please ensure that the pieces are approximately 1/4th inch in size and well pounded before putting in the jar for grinding. Wet Grinding HOW TO ASSEMBLE & OPERATE YOUR CITRUS JUICER This state of the art citrus juicer has been especially designed to facilitate a simple & easy way to maximum juice extraction. The gear train has been made keeping in mind the safety of the user as well as the speed which ensures splash free operation Soak material to be ground in water for 1½ to 2 hours. Drain water completely. Fill material slightly above the blade level and run the mixer at low speed for 1½ to 2 minutes, till it becomes a fine paste. Note : While doing tough wet grinding, air bubbles may go inside the paste and the blade will rotate empty. Indication is that the noise will be heavy. When it is so, immediately stop the mixer, stir the paste with the spatula and start again. To Grind Large Quantities With Liquid Soak the material for 2 to 3 hours. If you want to grind parboiled rice, soak it for 6 to 8 hours. Drain water completely. Add the soaked material to fill ¾ of the jar. Now run the mixer at low speed. While the mixer is on, add water gradually till the paste becomes uniformly fine. Stop and stir in between to allow trapped air bubbles to escape and to allow circulation. It will take 2-3 minutes to grind dal/rice. To grind parboiled rice it may even take 5-6 minutes. How to assemble & use the citrus juicer Place the bowl on the lugs & move it clockwise. See that the handle & motor are in the same alignment. Move it anticlockwise to unlock. See that the container is locked over appropriate slots on the unit. Place the geared drive shaft on the food processor side fitting it properly on the main shaft in the bowl. The juicer now has to be placed on the drive shaft & bowl. Fit the juicer on the bowl & turn it clockwise. Once the juicer is fitted & moved clockwise it activates the toggle switch, engaging the juicing cone. Now switch on the machine, place the cut fruit on the cone, applying moderate pressure till all the juice is extracted. 8. Use the citrus juicer on low speed only. Note : For quick fresh fruit juice, cut the fruit horizontally & keep ready before starting the unit. HOW TO USE COCONUT SCRAPPER Assemble the citrus juicer unit as shown above. Instead of placing the citrus cone, replace it with the coconut scrapper blade. Operate the food processor on whip position momentarily, to see if the blade has fit in place. Place the coconut on the blade and start the process of scrapping. Use the coconut scrapper on low speed only. Caution: - The Blades are very sharp, you may cut your fingers. Operate with extreme caution

7 1. HOW TO ASSEMBLE & OPERATE YOUR CENTRIFUGAL JUICER Place the food processor bowl on the grinder unit. CIRCUIT BREAKER (OVERLOAD RELAY FOR MOTOR PROTECTION) We have provided a Circuit Breaker (CB) in your food processor. 2. F i x t h e J u i c e r N e t i n t h e Centrifugal Juicer bowl. 3. Put the Centrifugal bowl on the drvie shaft Run the food processor on whip position for a second to see if it is fitted fine. You may now run juicer cover. Introduce the vegetable/fruit to be juiced through the feeder tube and push down with the juicer pusher. The juice will collect in the bowl whereas the pulp accumulates in the juicer body along with the walls of the strainer. After sufficient pulp has been collected, stop the juicer, remove the pulp and restart the juicer again. Many times, without realising, people tend to overload the food processor, by putting more material in the jar than recommended. This results in the motor getting overloaded and eventually burning out. In order to protect your food processor from burning out, we have provided a special overload relay known as a circuit breaker. This circuit breaker works just like the common fuse in your house. In case, unintentionally, you overload the machine and try to run it, the circuit breaker will trip automatically, clearly cutting off the electric supply, to the motor and switching off the food processor, thereby protecting the motor. In case this event occurs, switch off the machine, and allow the machine to cool for 2-3 minutes. Also reduce the material in the jar. After 2-3 minutes, press in the button of the Circuit Breaker (which is at the bottom of the machine). Now switch on and restart the machine. CIRCUIT BRAKER RED-TIP PIN-ROD NORMAL POSITION PIN-ROD HAS COME OUT EXECESSIVE CUT OFF POSITION PUSH PIN-ROD UPWARD TO RE-SET WHIPPER / PULSE TECHNIQUE / INCHER Operations like chopping & mincing sometimes need better consistency. To agitate the food that is being processed in the food processor processing is done in short bursts in lieu off continuous motion. This is achieved by using the whipper speed by switching the machine on/off, this technique is known as pulse technique. In this way, the Circuit Breaker protects your motor from burning out and saves you from incurring any repairing cost

8 CLEANING & MAINTENANCE OF YOUR FOOD PROCESSOR. HOW TO PERFORM VARIOUS FUNCTIONS WITH YOUR FOOD PROCESSOR. Cleaning of the Bowl l Unplug the appliance from the power supply. l Remove the bowl cover and bowl from the food processor. l Wash with luke warm soap water and scrub gently with a soft sponge. l Do not use a metal or nylon brush for scrubbing. Cleaning of jars l After using the food processor jars, pour some soap water in the jar and run for a short while. l Remove the jar and wash the inside with clean water. l Run the jar without any contents for 2-3 seconds only. l Now keep the jar inverted to dry. Cleaning the grinder unit l Wipe it with a soft clean cloth & keep aside. Cleaning the blades l Remove the blades carefully. Clean the blades in running water. l Dry the blades before storing. l It is advisable to apply oil on the stainless steel cutting blades when the appliance is stored for a long duration. Cleaning of Citrus & Centrifugal Juicer l Unlock & remove the strainer. Remove the pulp into a garbage bin. l Wash the blade & strainer under running water. Dry well before storing How to Knead (Dough) Place the plastic blade & then place the flour to be kneaded in the bowl. Start the machine & through the feeder tube add water. Start with less water & keep adding, as too much water may make the dough stick. Let the dough form into a ball & let it move approx. 25 times around the bowl so that it becomes soft & smooth. Even dough of pizza bases, pastries can be made. Tip : Water should be less than ½ the quantity of atta (dough). eg : If 2 full measuring tumbler of dough are taken ¾ measuring tumbler of water should be added. How to Crumb (Bread) Position the S. S. Blade in the bowl. Cut the bread into pieces. You can use fresh or dry bread. Continue processing until crumbs of desired quantity are not formed. Biscuits, nuts, chocolate etc. can also be crumbed in the same way. How to Wet Grind (Dals) The dal should be soaked overnight. Put the dal in the grinding jar. First use the pulse technique & then run it continuously till desired smoothness is achieved for better results. Similarly dosa, idli, vada mixes & chutneys can be ground. How to Chop (Onions) First peel & quarter the onions, position the S. S. Blade & then put the onions. Use the pulse technique to chop the onions. As short bursts of movements stir the food, chopped results obtained are more even. In this same way all hard vegetables are chopped. Small items can be dropped through the feeder tube while the machine is running. The load should be medium for optimum results. How to Make Potato Chips (French Fries) Start with peeling of potatoes, then flatten the end surfaces by cutting thin slices. Place the chipping disc. Put the potatoes vertically through the feeder tube so that the flat end rests on the disc. Using the pusher apply pressure throughout. Place the potatoes horizontally for longer chips. Other vegetables & fruits can also be done in the same way for salads & garnishing.

9 How to Thick Shred (Beetroot) Place the shredding blade in the bowl. Cut beetroot & put it through the feeder tube. Start the processor & push the beetroot down. The shredded beetroot can be used in salads. Coconut & cheese can also be shredded in the same manner. How to Thin Shred (Carrots) Fix the thin shredding in blade holder. Place the blade holder in the bowl put the carrots through the feeder tube. start the processor push the carrots down the shredded carrot can be used in salads. How to Slice (Cucumbers) To start with, position the slicing blade in the bowl. Put the cucumber in the feeder tube. Start the machine, apply light pressure for thinner slices. Carrots, brinjals, boiled eggs etc. can be sliced also. Tip : Seeds & cores must be removed before putting the fruit into the feeder tube. How to Julienne (Carrots) Peel & cut carrots & place the shredding blade in the bowl. Place the carrots in the feeder tube. Start the machine. Capsicum, cucumber can also be julienned similarly. How to Mince (Meat) For mincing, place the S. S. Blade in the bowl. Leave some fat on the meat for moistness. Run the machine. For kababs you can use the pulse technique also. How to Mash (Potatoes) Use the S. S. Blade. Boil the potatoes & cut into cubes while still hot. Place in the machine & run. Tip : Potatoes should be mashed hot to avoid them from becoming pasty. How To Crush (Ice) To crush ice use the S. S. Blade. Put the ice cubes through the feeder tube. Start the machine. After processing is stopped if one or two large pieces of ice remain, discard them. Hard & frozen cheese can also be grated in the same way. In this process it is not unusual for the machine to move so do not place it on the edge of the counter. How to Whisk Eggs The Whipping blade is an excellent attachment for whisking. It beats the egg white & makes it very thick. However, the bowl & whipping blade must be completely dry before use. Tip : For best results use fresh eggs or bring the refrigerated eggs to the room temperature before beating. Method : Pour the egg white in the bowl. Run the machine for a few seconds. A thick frothy mixture will be formed. Add the egg yolk & beat for a few seconds. Whipping (Thick Coffee Shake) This operation is performed with the help of the whipping blade. One tea spoon of coffee, two tea spoon sugar, ¼ cup water. Run the food processor for 30 seconds and the thick coffee paste is ready. Serve with hot milk. For Cold Coffee - add coffee & crushed ice & run the food processor for 30 seconds. You will get thick cold coffee paste. Serve with sweetened milk. How to Puree (Tomatoes) Place the S. S. Blade in the bowl. Cut tomatoes & place in the bowl. Run the machine continuously till desired consistency is achieved. Baby food & other soft vegetables & fruits can be pureed too. Hard vegetables need to be first boiled & then pureed for soups

10 GENERAL OPERATING PRECAUTIONS l Before switching on, please make sure that the appliance is connected to a 3 pin, 240 Volts, 5 Amp. AC socket. l Before using, put the machine on a strong table board and operate as per the instructions given in this manual only. l Do not use wet hands while operating the appliance. l Do not immerse the base/motor unit plug or cord in water or any other liquid. l To protect against electrical hazards do not use outdoors or on wet surface. l Before operating the food processor, always switch on the food processor momentarily (for one or two seconds) to see if everything is in place and it is running smoothly. l l l Do not open the cover while processing. If power supply is on, do not put your hand or any other object into the feeder tube. Do not insert your finger, knife or spoon in the juice container or grinder or pusher slot while in operation. It is dangerous. Be sure to turn switch to off position after each use. Wait until the juicing / cutting / mixing attachments come to a full stop, before removing the cover or inserting the spatula spoon or removing the attachment. Do not overtax the motor with heavy loads. If after loading the machine & switching on the motor, it does not start or it runs at a very low speed, check if the material filled is too much. If so, reduce the material & proceed again. Heavier the substance less it should be filled. l Switch off the motor, if it stalls or smoke emanates from the motor. l Do not operate your appliance with a damaged cord or after it has been dropped or damaged in any manner. l Switch off the machine; unplug the cord before cleaning and when not in use. l Please do not leave the Food Processor unattended while operating the machine. l After operation, first pull out the plug of power supply and then pour the food. l Wash the attachments thoroughly after use. l Do not keep the base unit on any cloth / paper while running it, as this may stop the flow of air, from the bottom of the mixer to the motor, resulting in overheating of the motor. l The blades are sharp & must be handled with care. The blades should be changed only after the machine is unplugged. l This Food Processor must not be used for other purposes than indicated in this manual. It is not a commercial Food Processor and cannot be used for commercial purposes l l Do get the Food Processor serviced from our authorised service centres at least once a year - list enclosed separately. Keep the Food Processor away from children. HANDY HINTS 1. The instruction manual must be carefully read before you start using the machine. 2. The machine should not be run unless the jar is in position. The lids & covers must also be put properly. 3. While grinding, ingredients should be dry for best results. 4. Turmeric & other hard substances should be pounded well before putting in the grinder jar or chutney attachment. 5. In some cases over grinding makes the powder sticky. 6. Sugar / Salt should not be over ground as it may over heat, melt & stick to the blades causing damage to the machine. 7. Use only one blade at a time. 8. Sometimes the jar may get heated up while dry grinding, but it has nothing to do with the motor, so you need not worry. Q1. A1. Q2. A2. Q3. A3. Q4. A4. Trouble Shooting Tips If the machine is not operating. Please Check a) The food processor bowl is properly positioned. b) The jar / safety cover is properly locked. c) Auto cut off (circuit breaker) is in pressed position. While running, the machine stops. Please Check a) The circuit breaker (refer to the circuit breaker portion in the instruction manual). b) The cord is plugged into the socket properly. c) The food processor cover / the grinder safety knob - they may have come lose. The jar is leaking from the gasket / dome. Take out the gasket, wipe it with a dry cloth. Wipe the dome also with a dry cloth (especially the area where the gasket sits). Fit the gasket again and retry the grinding. There is a burning smell from the machine. Do not use it, take it to the nearest authorised service centre immediately.

11 BLADES & DISCS OPERATIONS BLENDING CHIPPING CHOPPING CRUMBING CRUSHING WET GRINDING DRY GRINDING JUICING (Hard Fruits & Vegetables) JUICING (citrus Fruits) JULIENNING KNEADING MASHING MINCING PUREE SHREDDING/SLICING COCONUT SHREEDING BEATING WHISKING CHURNING BATTER FOR CAKES WHIPPING CUTTING PULPS SHELLS SLICING MIXING GRATING PASTING MILKING STRAINING CHOPPER BLADE KNEADER (ATTA) BLADE COCONUT GRATER Quick Reference Chart WHIPPING DISC THICK SHREDDER THIN SHREDDER SLICING BLADE FINGER CHIP BLADE LIQUIDISER JAR S.S GRINDING JAR DRY GRINDING CHUTNEY JAR CENTRIFUGAL JUICER CITRUS JUICER 20 21

12 Food Processor FP101 Food Processor FP101 22

13 AUG 24 25

14