Water filtering system for optician
|
|
- Arron McCarthy
- 6 years ago
- Views:
Transcription
1 Water filtering system for optician Instruction manual Version
2 V
3 Safety instructions Intended application This device has been developed for the filtration of the water used to edge ophthalmic lenses. Do not use it for any other reason. General Safety Before putting the device into operation please read the safety instructions and the operation manual carefully. That way all functions can be used safely and reliably. Keep this operation manual. In the case of handing over this device to someone else, this manual has to be passed on as well. Packaging materials are in no way toys. Prevent children from playing with the bags that are made out of plastics. There is risk of suffocation. Keep children away from the materials included in the active carbon cartrige and the Zinc Ricinoleate bottle. In case of inadvertent contact, wash skin and eyes with water. Do not try to open or repair the device yourself. Repairs should only be carried out by trained personnel. Installation Conditions The device must be placed on a solid and stable subsurface. Do not run the device in a surrounding where water or liquid might enter. In case of ingress of water there is a risk of electric shock. Make sure that all cables and tubes are arranged in a way that no one might stumble. The air in- and outlet of the anti-smell device must be kept entirely free. Precautions against electric and magnetic dangers Make sure that the device is connected with a bus bar that provides the same voltage and frequency as stated on the type plate and that it is grounded according to the local requirements. The device is only to be run with a voltage of VAC. The device has a maximum electric consumption of 400 W. To pull the plug, always pull the plug, not the cable. For a better protection against the dangers of electric current a special safety switch should be used if an installation for that purpose is missing. Cleaning and maintenance Before any cleaning or maintenance, switch the device off and disconnect it from the bus bar by pulling the plug out of the socket. Never switch on the device during cleaning or maintenance. In case of interferences Pull the plug immediately if cable or device is damaged. Do not induct any objects into the device. Conductor rails might be touched. If liquids or foreign substances get into the device, pull the plug immediately. The device should then be checked before it is put into operation again. If a proper function is not possible even if the function is according to all articles of the operation manual, the device has to be disconnected. Besides these advices in the operation manual all local rules for accident prevention have to be considered and followed. V
4 V
5 Operating Principle The operating principle of the system is simple. The edger cooling water is contained in the right tank of the Neptune filtration. These 50 litres of polluted water during the day by edging residues are pumped into the left tank of the system when starting the filtration cycle. The left tank includes a filter bag with a 70 litres capacity which will retain the grinding residues: the 50 litres of water and, as the filtration cycles accumulate, up to 20 litres of residues, which is on average equivalent to 1500 lenses. Day Night Returned water from edger Water to the edger It is imperative that one of the 2 tanks is always empty of water so that the system works by a principle of communicating vessels! Filtering bag When sending polluted water into the filtering tank, a portion of this water is used to clean the walls of the working tank and its bottom. When all the water is pumped into the filtering tank, the pump stops and Filtration tank Working tank Cleaning and filling of the tank with clean water approximately 1 liter of filtered clean water returns from the filtering tank to the working tank. This water is used again to clean the walls, the bottom and then returns to the filtering tank. This cycle will repeat 10 times and will last from 10 minutes to 1 hour depending on the quantity of residues in the bag. As the bag will fill up with residues, the cycle time will lengthen, but the maximum time will always be 1 hour or less. The number of cycles in the allocated time will therefore become shorter. It is this count that will determine the moment for changing the bag. Although the cycle varies from 10 minutes to 3 ~ 4 hours, the total powered time is about 10 minutes, which represents an average energy consumption of Start the cycle every day to prevent the accumulation of residues which will eventually block the pumps. V
6 Starting to use the Neptune filtering system 1. Unpack Neptune and remove all the polystyrene packaging. 2. Lift the filtration cover using the two handles (left side) and verify that the metal bracket at the bottom is in place, that the power cord from the return pump does not disturb the movement of the float switch. Reposition the cover. 3. Connect the control box Run the cable through a hole in the work bench Connect the cable to the box Place the box next to the edger 4. Connect Neptune to the mains. 5. Switch on the power switch on the bottom left side of the filtration system Neptune (diodes of the control box will flash and initialize). 6. Install the pump of the edger in the back of the working tank. 7. Fill the tank of the working tank (right side) with 50 liters of water. The green diode of the series of three diodes 5MIN, OK, MAX) located on the the box should be lit. If there is not enough water, the lower red light is on, add water. If you put too much water, the upper red light lit up. It is imperative to pull water out from the tank to return to the OK position. With Anti-Smell option The Anti- smell device is composed of three parts The collector / diffuser of zinc soap Remove the Zinc bottle cap and clip it into position on top of the tank Position the module with the orange ring in the hole on the upper tray Note: the bottle of zinc is to be changed when empty, approximately every three months. Fix the activ carbon filter on the Zinc soap diffuser module Note: this module is to be changed every six months. The fan module Put the stick fragrance into the tube (if desired) Fix the fan module on the active carbon filter Connect jack socket 8. Set up the return drain (100mm diameter) between the edger and Neptune 9. Neptune is ready to be used V
7 Description Control Unit 1. DAY mode switch and LED indicator 2. NIGHT mode switch and LED indicator 3. Inverter switch DAY/NIGHT 4. Filtering tank water presence LED indicator (T2) 5. Water level LED indicator in working tank (T1) 6. RUN switch 7. STOP switch 8. Cycle counter 9. ERROR LED Use Operation The master switch is located on the lower left side of the machine. When pressed, all LED from the control panel will lit for initialisation. When finished, only the DAY LED and the Water Level Indicator will remain lighted. Water level control Independantly from the selected mode, i.e. DAY or NIGHT, the T1 LED indicator indicate the water level in the working tank There are 3 positions: 1. Red upper LED: Too much water in the tank 2. Green middle LED: Water level is OK 3. Red lower LED: Not enough water in the tank Position N#1, red upper LED lit generates a system malfunction. Excess water has to be removed from the tank to return to the middle green position OK V
8 Filtration Cycle start Press the MODE switch every evening when closing the lab. The NIGHT mode LED lights. Press the RUN mode switch until the corresponding LED lights up. It confirms the starting of the filtering cycle (the pump should start at this same moment). The cycle will last from 1 hour to several hours depending of the quantity of waste in the filter, hence the reason for starting the cycle at the end of each the working day. The cycle counter will indicate the number of filtering cycles that have been performed within 60 minutes. This number is limited to 9 and the cycle can be shorter than 60 minutes if the bag is new. When the filtering cycle is finished, a letter/number will be shown: o If the counter indicates 3 or below, it is time to change the filtering bag. o If the counter indicates P, it is an error message. The return pump in the filtering tank has been working continuously for 8 hours. See maintenance section o If the counter indicates G, it is an error message. The main pump in the working tank has been working continuously for 15 minutes. See maintenance section. The T2 LED indicates water in the filtering tank. During the filtering cycle it will turn on and off. This is normal; it indicates that the water is filtered. This LED should never be lit during the DAY use. If it is lit, it indicates that water remains in the filtering tank. This situation is abnormal: 1. Too much water in the tanks: as the tanks communicate trough a communicating hole in their top, the filtering tank can never be emptied. 2. Edging residues have penetrated the filtering tank through the communication hole and have potentially blocked the small pump located at the bottom of the filtering tank. In both cases, remove the excess water, remove the filter assembly, clean the filtering tank and check the small pump operation: 1. Press MODE switch to DAY 2. Press RUN and wait for the cycle start. 3. Press STOP V
9 4. Press STOP again and maintain pressed. The small pump should start. If not, open it, check the rotor, clean it and re-assemble. Important: Empty and clean the filtering drawer every day, particularly if edging polycarbonate or milling (Essilor M. Blue, etc ). In case of important operation, empty and clean as much as needed. Installation Anti-Smell device 1. Position the bottle of Zinc ricinoleate soap. This bottle has to be changed when empty (roughly every 3 months). 2. Encase the diffusion box. 3. Position the active carbon filter. This filter has to be changed every 6 months. V
10 4. Insert the air vacuum box. A perfume stick (identical to those used in vacuum cleaners) can be positioned in the pierced tube. 5. Connect the box to the power supply cable Operation 1. Press the MODE switch to make sure that the system is in Day mode. It is not necessary if the Day LED is already lit. 2. Press the RUN mode switch until the corresponding LED lights up. It will start the anti-smell cycle (the fan will start). The cycle will last for 30 minutes and stops automatically. The cycle can be started as much as needed. 3. The STOP switch can be pressed for immediate stop. In this case, both DAY LED and NIGHT LED will flash. Press MODE to resume normal operation. 4. The STOP switch can be pressed for immediate stop. In this case, both DAY LED and NIGHT LED will flash. Press MODE to resume normal operation. Nb: When starting the cleaning/filtering cycle, the fan will run for 1/2 hour to remove the odour of brewing water charged with grinding particles. V
11 Maintenance Changing the filtering bag The bag has to be changed every 1500 lenses on average. Do not clean it! When the cycle counter indicates 3 or less, the filtering bag has to be changed within a few days, i.e. next week end. In order to operate this operation as much comfortable as possible, it is better to plan it in advance: Do not start the filtering status the previous day so that the bag is as dry as possible (less heavy ) Prepare a garbage bag of 100 litres (22 Gal) Lift the filtering assembly and place it directly in the garbage bag Remove the upper screws Remove the metallic frame Remove the filter, close the garbage bag and place it in the domestic garbage. Install the new filter, make sure that the metallic frame clips the bag Tighten the screws back Before re-inserting the filtering assembly, clean if necessary the tank, check that the pump is OK and that the water presence switch is free to move. Check the position of the grid support. It must "protect" the sensor N 1. Take advantage of this operation to verify that the nozzles of the hydraulic system are not blocked Check water level after one complete cycle Cycle counter should indicate 9 Zinc soap Every 3 months, check level and eventually replace. Active carbon filter To be changed every 6 months. V
12 Reminder : The filtering bag is a consumable, it should be changed approximately every 1500 lenses. Reusing a bag after cleaning it will cause a failure in the system. Changing the water In order to maintain the best performance of the filtering system, it is recommended to drain the water at least once a year. Depending of the nature of the water and the amount of edged lenses, it might be necessary to perform this operation more often. Draining the water is simple and has to be done when changing the filtering bag: o Remove the filtering bac with its cover. o Introduce a bucket under the hydraulic tube connecting the filtering bag. o In DAY mode, hold down RUN to start a cycle. o As soon as the RUN LED is lit, press STOP. Neptune is in test mode and the 2 LEDs NIGHT and DAY blink. o Press RUN to start the main pump and start to transfer the water into the bucket. o When finished, press MODE to return to the DAY mode. o Fill up the tank with fresh water. Pour a bottle of SIDEROPTIC in the fresh water to decrease foam, the "greasy film" adhering to the walls and prevent bacterial growth. The product is active as the water is not changed. Hydraulic circuit cleaning The hydraulic circuit can become clogged with edging particles, especially those of polycarbonate. At each change of bag, check with the hand that the nozzles of the circuit are not blocked. Otherwise, clean nozzles as follows: o Remove the cover located on top of the tray. o Unscrew the porpoise nut indicated with the yellow arrow o Remove the hydraulic circuit. V
13 o Check the nozzles o o if necessary, dislocate the pipes (each pipe is glued at one end to an elbow to facilitate reassembly of the circuit). Clean the pipes with a stiff wire. Relocate the circuit, tighten the porpoise nut and reset the cover. Cleaning return pump The return pump can be blocked by the intrusion of a broken lens in its impeller or a solidification of edging residues if the filtering cycle is not performed every day To clean the pump : o Carefully open the cover to avoid breaking the plastic stand. o Remove the impeller from the pump body, clean it if necessary and reassemble. It should rotate freely. o Check the presence of the white nylon bearing and reassemble the cover. o Test the operation of the pump as indicated in the next section. V
14 Pumps and sensors tests All components of Neptune can be individually tested to diagnose a possible breakdown Filtration tank bottom sensor Sensor N 1 to the moving of the sensor. This sensor indicates the presence of water in the filtering tank. Its signal triggers the start of the return pump. Its correct operation is verified by moving it manually and checking the lighting and the extinction of the corresponding T2 diode of the control box. Warning: this signal is delayed and reacts slowly Working tank water sensor Sensor N 2 This sensor indicates the water level in the working tank. It is located on the front side of the tank, under the tray. When it indicates MAX, the water cannot be returned from the filtration tank to the working tank in order to avoid the overflowing of the working tank. Its correct operation is verified by moving it manually up and down and checking the lighting and extinction of the three diodes (MIN, MAX and OK) on the control box. Warning: this signal is delayed and reacts slowly to the moving of the sensor Filtering tank water presence sensor Sensor N 3 This sensor is located at the bottom of the working tank and indicates the presence of water in it Its correct operation is verified by moving it manually in upper position and simultaneously starting a filtration cycle (NIGHT + RUN mode). The main pump should start. Warning: this signal is delayed and reacts slowly to the moving of the sensor V
15 Main pump and return pump Their correct operation can be checked: o Press the MODE button to switch to night mode o Start the cycle by pressing the RUN button (min3 sec.) o Stop the cycle immediately by pressing the STOP button. NIGHT and DAY diodes blink. o Press the STOP button to test the return pump If the pump does not start, then proceed with its cleaning. o Press the RUN button to test the main pump. If the pump does not start, this is likely due to a locked rotor. Clean pieces of lenses or other materials that may be the cause. V
16 Answers to frequently asked questions (FAQ) Filtration (night) cycle does not start The starting of the night cycle is controlled by the RUN button and the signal "presence of water" in the work tank emitted by the water level sensor N 3 located at the bottom of the tank. With water, it must be set in the high position. Check that the floating sensor N 3 is not affected in its movement by edging residues or the power cable from the pump. The night cycle started normally and this morning the red light is on and the counter shows the letter "P". The return pump from the filtering tank worked continuously for 8 hours. The water level is set to OK o Turn off power on the left side of the tank, wait several seconds and turn on again the tank. Monitor the LED test on the control unit (they light up one after the other). After this test, the control box must be in DAY mode, T2 LED off and water level OK. The cycle counter will indicate a point, no number (no cycle has been achieved since power on). If this is the case, the control software bugged during the cycle. T2 LED is on and the water level is on MIN o Check the filter tank pump as previously said o Check the hydraulic connection between the pump and working tank o Ensure free movement of the water sensor in the filtering tank The night cycle started normally and this morning the red light is on and the counter shows the letter "G". The working tank pump worked continuously for 15 minutes. Check that the floating sensorn 3 is not affected in its movement by edging residues or the power cable from the pump The hydraulic system which is fed by the working tank pump is clogged. Unscrew the tube coming out of the pump (big porpoise nut) remove out all the tubes and clean them with a stiff wire or a knitting needle The green tray T2 is turned on while the filter cycle is finished There is too much water in the entire system. Remove water from the working tank before restarting the cycle at the end of the day. If necessary complete with water in the morning. Beware; the filtering tank has probably been polluted by contaminated water from the working tank. As soon as possible, while the filtering tank is empty after a filtration cycle (T2 LED off), remove the filtering bag and clean the tank. V
17 Accessing to the electrical box and fuses o Unplug the electrical plug from the socket. Unscrew the 2 upper screws holding the working tank cover and remove it. o Unscrew the 2 side screws holding the front upper cover and remove it. o Unscrew the screw holding the stainless steel part. o Remove the part. o o Lift the front panel and gain access to the electrical box in which the fuse (2A/250V or 5A/110V) is located. Reassemble in the inverse sequence. V
18 Main Board Version 3 Control panel V3 (Filtering cycle counter) Anti-smell electric board V
Antari Low Fog Machine
User Manual Antari Low Fog Machine Congratulations on the purchase of your new ANTARI FOG MACHINE. Introduction Thank you for choosing an ANTARI Fog Machine. You now own a rugged and powerful state-of-the-art
More informationZ-Stream Fog Machine User Manual English
Z-Stream Fog Machine User Manual English 2014 Antari Lighting and Effects Ltd. 1 2 3 Thank you for choosing the Z-Stream. You now own a durable and powerful state-of-the-art machine. Prior to use, we suggest
More informationUSER MANUAL. Version: 1.0. ROBE Show Lighting s.r.o. Czech Republic
USER MANUAL Version: 1.0 ROBE Show Lighting s.r.o. Czech Republic www.robe.cz Table of contents 1.Introduction 4 2.Cautions 4 3. Unpacking & Inspection 5 4. Setup 5 5. Operation 5 5.1.Control Module Operation
More informationA few simple steps to ensure perfect water, every time.
A few simple steps to ensure perfect water, every time. Use and Care Guide MODELS: A8CTBOTTLELESSWHT A8CTBOTTLELESSBLK Registration Please visit the website below to register your new water cooler within
More informationA few simple steps to ensure perfect water, every time.
A few simple steps to ensure perfect water, every time. Use and Care Guide MODELS: A9CTELECTRICSS A9ELECTRICBLK A9ELECTRICWHT Registration Please visit the website below to register your new water cooler
More informationInstruction Manual for Electric Ovens OO757X OO986X
Instruction Manual for Electric Ovens OO757X OO986X 1 2 DEAR CUSTOMER, We thank you and congratulate you on your choice. This new carefully designed product, manufactured with the highest quality materials,
More informationMODEL A5-2 SOLVENT & WATER RECOVERY SYSTEMS (EXPLOSION PROOF UNITS)
MODEL A5-2 SOLVENT & WATER RECOVERY SYSTEMS (EXPLOSION PROOF UNITS) FOR PROPER AND SAFE USE OF THIS CHEMCHAMP EQUIPMENT, PLEASE FOLLOW THIS DOCUMENT AND LOCAL AUTHORITY. KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
More informationDiafine INSTRUCTIONS. Reliable operation Description General characteristics Installation Operation Maintenance Electrical Diagram.
Diafine 1 Diafine NSTRUCTONS Reliable operation Description General characteristics nstallation Operation Maintenance Electrical Diagram Warning n order to reduce the risks of fire, electric shock and
More informationFundamental safety warnings
INTRODUCTION Read these instructions carefully before using the appliance. Failure to follow these instructions may result in injuries and equipment damage. The manufacturer is not liable for damages resulting
More informationGENANO AIR PURIFICATION TECHNOLOGY
GENANO AIR PURIFICATION TECHNOLOGY GENANO 310 AIR PURIFICATION DEVICE OPERATING INSTRUCTION This manual is for the Genano 310 log. Version. GENANO LTD Kimmeltie 3 FI- 02110 Espoo FINLAND Tel + 358 (0)
More informationModel S-530 Coin Sorter / Value Counter Operating Manual
Model S-530 Coin Sorter / Value Counter Operating Manual Table of Contents Using the Product Safely... 2 About the Warning Stickers and Points of Warning/... 2 Warnings... 3 s 4 Names of the Machine Parts....
More informationCombination ultrasonic and heating method of misting. Micro-computer automatically senses air humidity and start operation
Wholly Electronic Circuit Micro-computer automatically senses air humidity and start operation Digital display screen shows operating conditions Thank you for using our product. You have purchased a high-quality
More informationC90 Instruction Manual
C90 Instruction Manual Please read this Instruction Manual and the safety instructions on pages 1 and 2 before operating the appliance! IMPORTANT SAFEGUARDS When using electrical appliances, basic safety
More informationOPERATING INSTRUCTIONS
EN MOSQUITO KILLER OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe
More informationRules for Safe Operation
Rules for Safe Operation Important: Do not attempt to operate the CleanStation until you have read thoroughly and understand all instructions and safety rules contained in this manual. Failure to comply
More informationPWC-500/1000/1010/1500
SERVICE MANUAL for by Vertex Model PWC-500/1000/1010/1500 P/N man-7008 Table of Contents 1. Introduction 2. Cooler Set-up 3. Remove Top Cover 4. Remove/Replace Float 5. Remove/Replace Hot Tank 6. Faucet
More informationOPERATING INSTRUCTIONS FOR THE TP18SX-HP
OPERATING INSTRUCTIONS FOR THE TP18SX-HP PLEASE READ THIS INSTRUCTION MANUAL PRIOR TO USING THE MACHINE Version 07/11 OVERVIEW The TP18SX-HP is a professional carpet extractor, with excellent performance.
More informationMODEL A18 SOLVENT RECOVERY SYSTEMS (EXPLOSION PROOF UNITS)
MODEL A18 SOLVENT RECOVERY SYSTEMS (EXPLOSION PROOF UNITS) FOR PROPER AND SAFE USE OF THIS CHEMCHAMP EQUIPMENT, PLEASE FOLLOW THIS DOCUMENT AND LOCAL AUTHORITY. KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
More informationLEC L6014W/S User Manual
LEC L6014W/S User Manual Safety Information Important Please read these instructions fully before installation Before use The installation of this appliance is best carried out by 2 people. Dispose of
More informationZ-800II / Z-1000II / Z-1020 Fog Machine User Manual
Z-800II / Z-1000II / Z-1020 Fog Machine User Manual English Français Deutsch 中文 2014 Antari Lighting and Effects Ltd. 1 User Manual Z-800II & 1000II & Z-1020 Fog Machine Congratulations on the purchase
More informationEFX 600. aquamanta. Instruction Manual. 4year guarantee. the experts in aquatic technology. >600 Litres
EFX 600 aquamanta TM the experts in aquatic technology >600 Litres Coldwater Tropical Marine 4year guarantee Instruction Manual Important Safeguards This appliance is not intended for use by persons (including
More informationHand Dryer Installation & User Manual
Hand Dryer Installation & User Manual Please read instructions in conjunction with the illustrations Please save these instructions. Safety & Guidance notes Important:- Read all these instructions before
More informationALLERGEN MIXING ASSISTANT
ALLERGEN MIXING ASSISTANT User Manual 9495 SW Locust Street Suite E Portland, OR 97223 (503) 379-0110 Fax: (503) 715-1378 www.xtractsolutions.com SM026R2 Welcome to Xtract Solutions Thank you for purchasing
More informationProducts documentation (REVISION DATE: 03/10/2011) OMFP6010 (60cm PIROLITIC OVEN)
Products documentation (REVISION DATE: 03/10/2011) OMFP6010 (60cm PIROLITIC OVEN) Ovens Service Manual Models OMFP6010 CONTENTS This document has been published to be used for service only. The contents
More informationTECHNICAL INFORMATION T 15xx Dryers
TECHNICAL INFORMATION T 15xx Dryers 2010 Miele USA Table of Contents 1.0 2.0 3.0 T 15xx Dryers Construction and Design... 5 1.1 Appliance Overview Vented Models... 5 1.2 Appliance Overview Condenser Models...
More information3. To protect against electric shock, do not immerse cord, plugs, or machine in water or other liquid.
1 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
More informationKitchenAid Food Stream Solutions Classic and Integrated Series
KitchenAid Food Stream Solutions Classic and Integrated Series KitchenAid Chapter list Installation Range overview Installation General Information Function Compressor Power Control Board Defrosting Heating
More informationA few simple steps to ensure perfect water, every time.
A few simple steps to ensure perfect water, every time. Use and Care Guide MODELS: A7BOTTLELESS A7BOTTLELESSBLK Registration Please visit the website below to register your new water cooler within the
More informationOperating instructions Page 16. Refrigerator Read the operating instructions before switching on for the first time
Operating instructions Page 16 Refrigerator Read the operating instructions before switching on for the first time EN 7085 413-00 LKPv Content Safety instructions and warnings... 17 Noise emissions from
More informationWL380 QUICK START GUIDE
WL380 QUICK START GUIDE WARNING! Only trained and qualified technicians should attempt to install, maintain, or service Waterlogic equipment. Failure to follow all instructions in this manual could result
More informationCHESNEY S. Bio-Ethanol Installation & User Manual. model: EFB1200 with resevoir. Issue 01
CHESNEY S Bio-Ethanol Installation & User Manual model: EFB1200 with resevoir Issue 01 1 2 Thank you for choosing this Chesney s Bio-Ethanol fire. Please read this information guide carefully in order
More informationPRE INSTALLATION PROCEDURES
PRE INSTALLATION PROCEDURES DANGER! ELECTRICAL SHOCK HAZARD. Only qualified personnel who have read and understand this entire manual should attempt to install, or service this WL250 Water Treatment System,
More informationInstruction Manual. Model S05 / CAPO
Instruction Manual Model S05 / CAPO Table of contents 1 2 3 4 5 6 7 8 9 10 11 12 Introduction Intended use... 25 Follow the instructions - Symbols... 25 Your Map Coffee contact... 25 Safety warnings...
More informationVax Careline: Instruction Manual. Vax Model Number V-029 Vax Model Number V-029Q
www.vax.co.uk Vax Careline: 0870 6061248 Vax Model Number V-029 Vax Model Number V-029Q Please read carefully before using the washer. Always fully extend the mains cable before use. Instruction Manual
More informationCHESNEY S. Bio-Ethanol Installation & User Manual. model: EFB1200. Issue 01
CHESNEY S Bio-Ethanol Installation & User Manual model: EFB1200 Issue 01 1 2 Thank you for choosing this Chesney s Bio-Ethanol fire. Please read this information guide carefully in order to safely install,
More informationPro6 Duo. Stampa Novaprint - Tel cod USER MANUAL
Pro6 Duo Stampa Novaprint - Tel.0424-539449 - www.novaprint.it cod.10161031310 USER MANUAL 9. Troubleshooting PROBLEM CAUSE SOLUTION Boiler fails to heat up. Device not plugged in. Button 3 and/or 4 not
More informationINSTALLATION AND MAINTENANCE GUIDE TRENDY 1000 T ELECTRONIC LAVATORY FAUCET
INSTALLATION AND MAINTENANCE GUIDE TRENDY 1000 T ELECTRONIC LAVATORY FAUCET 1 INDEX 1 TECHNICAL DATA 2 TEMPERATURE ALTERNATIVES 3 PACK CONTENTS 4 PRE-INSTALLATION INFO 5-6 FAUCET INSTALLATION 7 ADJUSTING
More informationQTFX-900 mkii Fog Machine. Item ref: UK User Manual
QTFX-900 mkii Fog Machine Item ref: 160.463UK User Manual Introduction Thank you for choosing the QTFX-900 mkii as part of your stage effects system. This machine is designed to provide generous fog output
More information10. Water Dispensers
0. Water Dispensers 402. General features 404. 44. stainless steal 4. Accessories 422. Sanitation Cooler clean 423. Ozone disinfection 42. Sanitizing protocol 42. Filters guide 400 40 General features
More informationIMPORTANT INSTRUCTIONS OPERATING MANUAL
IMPORTANT INSTRUCTIONS OPERATING MANUAL ESP AIR PURIFIER with UV GERMICIDAL LAMP and NEGATIVE ION Model No.: 9079E READ AND SAVE THESE IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions
More information51AKS I S O OWNER S MANUAL
LLOYD'S REGISTER QUALITY ASSURANCE 51AKS I S O 9 00 1 OWNER S MANUAL This manual applies to the following models Stand-alone Split 51AKS 085--- 51AKS 010--- 51AKS 185--- 51AKS 013--- 51AKS 113--- 51AKS
More informationOVHM80 Max Air Purifier
OVHM80 Max Air Purifier Index Important Safeguards.. 2 Air purifier Description..3 Function Description. 4 How to use..5 Maintenance 6 Troubleshooting..8 1 Important Safeguards! READ ALL INSTRUCTIONS BEFORE
More informationUSER MANUAL WATER DISPENSER WITH ICE MAKER
USER MANUAL WATER DISPENSER WITH ICE MAKER Model:048-GM-48200 Please read this owner s manual carefully before operating the unit. TABLE OF CONTENTS INTRODUCTIONS... 3 IMPORTANT SAFETY INSTRUCTIONS.. 3
More informationGet Cleaning... What s your Vax s model number? User Guide. Carpet Washer Vax Careline: AU: NZ:
User Guide Vax Careline: AU: 1300 361 505 NZ: 0800 800 900 Carpet Washer Get Cleaning... What s your Vax s model number? W8 W8 W0 W0 W0 W W W W W What s your serial number? (Located on the base of the
More informationSERVICE MANUAL REFRIGERATION
SERVICE MANUAL REFRIGERATION Electrolux Home Products S.p.A. Spares Operations Italy Corso lino Zanussi, 30 I - 33080 Porcia (PN) Fax +39 0434 394096 S.O.I. Edition: 10.2006 Publication no. 599 38 38-50
More informationWarmette Blanket Cabinet Warmette Dual Cabinet. User Manual
Warmette Blanket Cabinet Warmette Dual Cabinet User Manual Natus and Warmette are registered trademarks of Natus Medical Incorporated. 2013 Natus Medical Incorporated. All rights reserved. This manual
More information- website: Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire WR9 0QH, UK
V-026PT User Guide.qxd 7/9/06 15:13 Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product V-026PT is manufactured in compliance
More informationOperating Instructions Wine storage refrigerator 12/
Operating Instructions Wine storage refrigerator 12/98 7080641 1 The wine storage refrigerator you have purchased differs from normal refrigerators in that it is suitable for long-term storage of wine.
More informationPURE AQUARIUM KIT. Instruction manual. Manuel d instructions Bedienungsanleitung Handleiding руководство по эксплуатации
PURE AQUARIUM KIT Instruction manual Manuale di istruzioni Manuel d instructions Bedienungsanleitung Handleiding руководство по эксплуатации Congratulations! By purchasing an Askoll PURE S Aquarium you
More informationFog 1550 FT USER MANUAL. Version: 1.2. ROBE Lighting s.r.o. Czech Republic
Fog 1550 FT USER MANUAL Version: 1.2 ROBE Lighting s.r.o. Czech Republic www.robe.cz Fog 1550 FT Table of contents 1. Introduction 4 2. Cautions 4 3. Unpacking & Inspection 5 4. Setup 5 5. Operation 5
More informationOperating instructions
Operating instructions for Winterhalter Gastronom dishwasher GS 502 and GS 515 Contents Page 1 Intended use... 1 2 Installation and commissioning... 1 3 Safety instructions... 2 4 Operating panel... 3
More informationZ-1500II and Z-3000II USER MANUAL Z-1500II und Z-3000II BEDIENUNGSANLEITUNG Mode D Emploi des Z-1500II et Z-3000II Machines à Fumée
Z-1500II and Z-3000II USER MANUAL Z-1500II und Z-3000II BEDIENUNGSANLEITUNG Mode D Emploi des Z-1500II et Z-3000II Machines à Fumée Congratulations on the purchase of your new ANTARI Z-SERIES II FOG MACHINE.
More informationRead this owner's manual thoroughly before operating the appliance and retain it for future reference. TYPE : PORTABLE AIR CONDITIONER
ENGLISH ESPAÑOL Read this owner's manual thoroughly before operating the appliance and retain it for future reference. TYPE : PORTABLE AIR CONDITIONER MODEL : LP0817WSR LP1017WSR LP1217GSR LP1417SHR LP1417GSR
More informationL&C Deep Fryer INSTRUCTION MANUAL MODEL:
L&C Deep Fryer INSTRUCTION MANUAL MODEL: IMPORTANT SAFEGUARDS.... 1 Part Name... 3 To Use... 4 General Frying Advice... 7 Cleaning and Maintenance... 9 The Reset Feature... 10 Troubleshooting... 11 Technical
More informationInstallation Instructions
Installation Instructions KFN 9855 ide en - CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations
More informationAIR PURIFIERS. Frequently Asked Questions
Air Quality Light Indicator The Air Quality Light Indicator never goes up to yellow or red, how do I know if the sensor works? Your indoor air is probably clean with no pollutants in it. To verify, place
More informationOPERATING INSTRUCTIONS
EN DEHUMIDIFIER LILIUM 11 LILIUM 13 OPERATING INSTRUCTIONS Read the instructions carefully before operating or servicing the dehumidifier. Observe all the safety instructions; failure to observe the instructions
More informationHID312, HID525 and HID540 Meridian Ice Maker-Dispensers Technical Service
HID312, HID525 and HID540 Meridian Ice Maker-Dispensers Technical Service What you will learn Introduction Installation Operation Maintenance Take It Apart Diagnostics HID Ice Maker-Dispensers HID models
More informationCTA15-2 warming drawer. operating and installation instructions
CTA15-2 warming drawer operating and installation instructions Table of Contents GB-IE 1 PRECAUTIONS FOR USE...4 2 DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY...5 3 SAFETY PRECAUTIONS...6 4 GET TO KNOW
More informationTECHNICAL INFORMATION T1500 Series Clothes Dryers
TECHNICAL INFORMATION T1500 Series Clothes Dryers 2003 Miele - Table of Contents 1.0 CONSTRUCTION & DESIGN 1.1 Appliance Overview - Vented 1 1.2 Appliance Overview Condenser Models 2 1.3 Controls Overview
More informationPORTABLE AIR CONDITIONER
PORTABLE AIR CONDITIONER Model: PEL00460 1 CONTENTS Page No. Details 2 Important Safety Information 3 Product Overview 3 Positioning & Installation 4 Installation Errors 4 Control Panel 5 Screen IMPORTANT
More informationSuperKlean Washdown Products
February 2012 DURAMIX 8000 INSTALLATION AND MAINTENANCE INSTRUCTIONS **DO NOT THROW AWAY AFTER INSTALLATION** **SAVE AND DISPLAY PROMINENTLY WHERE THIS EQUIPMENT IS USED** WARNING HIGH PRESSURE AND HOT
More informationSPECIFICATIONS FEATURES
FEATURES Excellent for collecting the large chips which will drop into the garbage can before reaching the impeller. The filter bag filters out the remaining sawdust down to 5 microns. With the cyclone
More informationBarAid 400. Installation and. Starting from Serial No.:
Glasswasher BarAid 400 Installation and operation Instructions Starting from Serial No.: 8649 1065 REV. 19.01.2009 DE 1618-A-01-09 Content Page 1 Important Notes... 4 2 Installation... 5 2.1 Location...
More information4000IS PROFESSIONAL IRONING SYSTEM INSTRUCTION MANUAL
4000IS PROFESSIONAL IRONING SYSTEM INSTRUCTION MANUAL THE 4000IS PROFESSIONAL IRONING SYSTEM INSTRUCTION MANUAL ENGLISH 01 RELIABLE. RIGHT THERE WITH YOU. At Reliable, we do what we love, and take pride
More informationAir always contains a certain amount of water in the form of vapour. This determines the
Useful information on humidity Air always contains a certain amount of water in the form of vapour. This determines the level of humidity in an atmosphere. The capacity of the air to hold water vapour
More informationSELF-PRIMING JET PUMPS
SS Anti-Rust SS Shaft Copper & Cold-rolled SELF-PRIMING JET PUMPS CONTENTS 1. Applications.... Model Description.... Technical Data... 4. Implementation Standards... 5. Safety Precautions... 6. Product
More informationIMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety.
GB IMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. Save these instructions for future reference. IMPORTANT SAFEGUARDS Read the following
More informationInstructions for Use Warming Drawer. Bedienungsanweisung Wärmeschublade. Notice d'utilisation Chauffe-vaisselle. Gebruiksaanwijzing Servieswarmer
Instructions for Use Warming Drawer Bedienungsanweisung Wärmeschublade Notice d'utilisation Chauffe-vaisselle Gebruiksaanwijzing Servieswarmer Table of Contents GB-IE 1 PRECAUTIONS FOR USE...4 2 DISPOSAL
More informationVFCB. Ice Frost 2 and 3 Bowl Post-Mix and 2 Bowl Pre-Mix. Installation, Service, and Operator s Manual
VFCB Ice Frost 2 and 3 Bowl Post-Mix and 2 Bowl Pre-Mix Installation, Service, and Operator s Manual Release Date: April 19, 2004 Publication Number: M620919596OPR Revision Date: June 14, 2007 Revision:
More informationVPMmini. Operator's Manual
VPMmini Operator's Manual Whip Mix Corporation 361 Farmington Ave. P.O. Box 17183 Louisville, KY 40217-0183 USA 502-637-1451 800-626-5651 Fax 502-634-4512 www.whipmix.com Features The Whip Mix VPMmini
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS FOR CARPET PRO UPRIGHT VACUUMS MODELS : CPU-75, CPU-75T, CPU-85, CPU-85T Before operating the vacuum, please read these instructions completely. Index Important Safety Instructions.............................................................2
More informationSPECIFICATIONS PART NAME
SPECIFICATIONS MODEL High HEAT RATING Low FUEL TANK CAPACITY BURNING TIME DIMENSIONS(W x D x H) WEIGHT VOLTAGE / FREQUENCY ELECTRICAL CONSUMPTION LC-S27 9,900 BTU / 2.9 kw 2,900 BTU / 0.8 kw 4.0 lit. 14.2~
More informationUF424 and UN324. Technical Service
UF424 and UN324 Technical Service Technical Service 1-800-533-6006 Check out the new mobile ready website www.scotsman-ice.com/service Technical Service Virtual Business Card What you will learn Introduction
More informationPUGMILL/MIXER. Instruction Manual NVS-07
92895B PUGMILL/MIXER Instruction Manual NVS-07 Attention After carefully reading this manual, be sure to store it in a safe and convenient place for easy reference. Before using this unit, please read
More informationTILE SAW RODIA 207RS OPERATING MANUAL
TILE SAW RODIA 207RS OPERATING MANUAL CAUTION Carefully read and understand all Safety and Operating Procedures prior to using the Rodia 207RS. Keep this Manual in a safe place for future reference. Contact
More informationWork-Shed Vac 1100 Watt
Work-Shed Vac 1100 Watt Operation Manual 3 Year Replacement Warranty WVG-951 To view the full range visit: www.ozito.com.au 0209 SPECIFICATIONS MODEL NO. WVG-951 Motor: Input: Max. vacuum: Hose length:
More informationAutomatic Ice Maker. Service Manual VT ICEMAKER 15
Automatic Ice Maker Service Manual VT ICEMAKER 15 Table of contents How the Icemaker works 3 10 Cooling System 3 Water System 4 5 Wiring Connections and Controller 6 8 Exploding Drawing 9 10 TroubleShooting
More informationIJ3000 IJ3000 Flushing System N Revision B Installation Instructions Page 1 of 10
IJ3000 IJ3000 Flushing System 5760-029N Revision B Installation Instructions Page 1 of 10!! WARNING: Do not turn on until all plumbing and electrical connections have been made. WARNING: The flushing system
More informationModels: RP-10, RP-15, RP-20. User Manual
Models: RP-10, RP-15, RP-20 User Manual Contents Thank you for purchasing the Ducasa Sunburst Radiant Panel Heater. Index Safety Precautions & Important Safeguards:... 3 Specifications:... 5 Features...
More informationWASHING MACHINE READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE CORRECTLY BEFORE OFFERING SERVICE.
website : http://www.lgeservice.com e-mail : http://lgeservice.com/techsup.html WASHING MACHINE SERVICE MANUAL CAUTION READ THIS MANUAL CAREFULLY TO DIAGSE TROUBLE CORRECTLY BEFORE OFFERING SERVICE. MODEL
More informationKITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE
KITCHEN EXHAUST FAN GLEC-6 INSTALLATION AND MAINTENANCE 2 GLEC-6 - Installation and maintenance CONTENTS 1 Important information... 3 2 Safety notes... 3 3 Technical description...4 4 Transport... 6 5
More informationFood Waste Disposer Instruction Manual
Food Waste Disposer Instruction Manual See insert for specific information about your new disposer NOTE: IMPORTANT: CAUTION: This Food Waste Disposer has been designed to operate on 110-120 Volt, 60 Hz
More informationUSER MANUAL AND TECHNICAL MANUAL
USER MANUAL AND TECHNICAL MANUAL Kanmed Universal Warming Cabinets Kanmed Blanket Warming Cabinets Kanmed Combination Cabinet GE-2300-070 / 4 2014-05-12 NOTE: This manual contains important information
More informationFocus 4010\ Focus 4010 HT porcelain firing furnace
INSTRUCTION MANUAL Focus 4010\ Focus 4010 HT porcelain firing furnace Warning You have available one of the most precise dental furnaces equipped with a heating muffle made by the original manufacturer
More informationRefrigerator KE T
Refrigerator KE 680-1-3T Service Manual: H8-74-07 Responsible: U. Laarmann KÜPPERSBUSCH HAUSGERÄTE AG E-mail: uwe.laarmann@kueppersbusch.de Tel.: (0209) 401-732 Customer Service Fax: (0209) 401-743 Postfach
More informationTHERMO POT MODEL: ETP-C3211(WH) Owner s Manual. Please read this manual carefully before operating your set. Retain it for future reference.
THERMO POT MODEL: ETP-C3211(WH) Owner s Manual Please read this manual carefully before operating your set. 1 Retain it for future reference. Record model number and serial number of the set. See the label
More informationElectric Hand dryer. Installation and operating manual
Electric Hand dryer Installation and operating manual Do not attempt to install the unit yourself unless you are a trained service technician. Otherwise, this may affect safety and proper functioning of
More informationINDOOR UNIT/OUTDOOR UNIT
SPLIT TYPE AIR CONDITIONER ENGLISH ENGLI INDOOR UNIT/OUTDOOR UNIT MODEL RAS-DX10CSK/RAC-DX10CSK RAS-DX13CSK/RAC-DX13CSK RAS-DX18CSK/RAC-DX18CSK OUTDOOR UNIT INDOOR UNIT RAS-DX10CSK RAS-DX13CSK RAS-DX18CSK
More informationMODULAR AUTOMATIC GRANULAR ICE FLAKER
MODULAR AUTOMATIC GRANULAR ICE FLAKER INSTRUCTIONS AND WARNINGS 24479 rev. 03 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on having
More informationUser manual. Refrigerator ZBA32050SA
EN User manual Refrigerator ZBA32050SA Contents Safety instructions 2 Control panel _ 4 First use 5 Daily use 5 Helpful hints and tips _ 5 Safety instructions Care and Cleaning 6 What to do if 6 Installation
More informationMIX Boiler & Font Range Service Manual
MIX Boiler & Font Range Service Manual 1000870# 1000871# 1000875# 1000880# 1000887# 1000878 1000879 2300268 www.marcobeveragesystems.com Ireland Tel: +353 (1) 295 2674 UK Tel: +44 (0207) 2744577 Service
More informationAquience 1200/1500 R
Aquience 1200/1500 R Congratulations, you have purchased one of the fi nest quality aquariums available. This product will give you many years of excellent service when installed and maintained correctly.
More informationUser Manual. Model: FSL200 Laser Fume Extractor
User Manual Model: FSL200 Laser Fume Extractor WWW.FSLASER.COM 1 1. Product Overview This high quality fume extractor featuring low noise brushless motor technology is designed for capturing dust particles
More informationMW402 Integrated Dishwasher
MW402 Integrated Dishwasher Manual for Installation, Use and Maintenance 1 Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu
More informationIMPORTANT SAFETY INSTRUCTIONS
User Manual INDEX IMPORTANT SAFETY INSTRUCTIONS... 1 FEATURES... 2 SPECIFICATIONS...2 PRODUCT DESCRIPTION... 3 THE CONTROL PANEL... 4 UNIT SETUP... 5 TO OPERATE SAFELY... 5 OPERATING INSTRUCTIONS... 6-10
More informationPUREPOWER SERIES CENTRAL VACUUM POWER UNITS PP500, PP600 & PP650
USER GUIDE PUREPOWER SERIES CENTRAL VACUUM POWER UNITS PP500, PP600 & PP650 AB0039 FOR RESIDENTIAL USE ONLY!! MODELS SFDB-DQ, SFDB-DR AND SFDB-DS 30042509E IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
More informationOPERATION & MAINTENANCE INSTRUCTIONS
SUBMERSIBLE PUMPS MODEL NO: PSV3A, PSV4A, PSSV2A & PVP11A PART NO: 7236042, 7236044, 7236050 & 7236060 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC07/17 iss 4 INTRODUCTION Thank you for
More informationen-us Use and Care Manual, Installation Instructions Washer WAT28400UC
en-us Use and Care Manual, Installation Instructions Washer WAT28400UC Under counter (Less Desirable) If front of the appliance is covered ventilation openings must be installed. E & F are minimum area
More informationMW401 Integrated Dishwasher
MW401 Integrated Dishwasher Manual for Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu
More information