TECHNOLOGIES OYSTER ACQUAPLUS ACTIVE COMFORT AIR. The new clean technology for the houses of the future.

Transcription

1 PRICE LIST 2012

2 TECHNOLOGIES OYSTER The new clean technology for the houses of the future. ACQUAPLUS An easy and inexpensive system for recovering all the heat in your fireplace. ACTIVE Smart technology where the stove or fireplace decide for themselves the best way to run. COMFORT AIR A wood and pellet burning heating system that stands out from the rest. 4 5

3 COMFORT AIR SLIM/BASIC Pat. Pend. n. PN2008U ALUTEC HOT AIR OUTLETS CAN BE POSITIONED UP TO 8 METRES AWAY, AS YOU WISH. can effectively carry the warm air into other rooms up to a maximum distance of 8 real metres with an output temperature of up to 80 C. Unlike traditional systems in which the hot air outlets must be positioned at the top, the Comfort Air outlets can be positioned as you wish, with obvious architectural and aesthetic advantages. EASY INSTALLATION AND MAINTENANCE. Thanks to the use of significantly lower diameters (60 mm and 100 mm) compared to the market standard, provides easier insertion of the ducting into the wall, limiting the necessary masonry work, which often takes time and can be very invasive. Moreover, the maintenance of fans is easy, since they are located in the hot air outlets (Basic) or between the glass-fronted fireplace and the hot air outlets (Slim). TOTAL CONTROL OF AIR CIRCULATION. Thanks to the two independent electrically adjustable fans (in stoves) and the electronic control unit that can control up to two ducts (in glass-fronted fireplaces), allows precise control of heat distribution between the different rooms where the air is ducted. MORE LIGHT FOR THE FLAME. Alutec is an MCZ patented material widely used in the fire boxes of stoves and glass-fronted fireplaces. The light-coloured mixture with a high aluminium oxide content gives great luminosity to the flame and increases the power of the reflected heat. What s more, by storing up heat, it also makes for excellent combustion. REMOTE CONTROL. Many of MCZ's pellet products are GSM READY, in other words designed for activation via remote connection to the modem on your GSM mobile phone. RELAX > This is the solution which foresees a remote control with few keys and a host of preset programmes (switch on and switch off). In addition, a room thermostat has been incorporated into the remote control to allow greater temperature control. EASY > A simplified solution featuring a control panel located on the stove, with easy and intuitive functions. GREATER EFFICIENCY WITH LOWER CONSUMPTION LEVELS. from MCZ extracts the heat produced by the glass-fronted fireplaces with greater efficiency by means of an extractor located in the glass-fronted fireplace outlet. Compared to traditional systems, allows you to increase the heat introduced into the room by 30%. This provides rapid, uniform distribution and allows you to save fuel. CLEAN AND SCENTED WARM AIR. (In this glass-fronted fireplace application) The system filters the entering air drastically limiting the entry of dust into the room. The filter is easy to extract and clean. The hot air outlets can be positioned as desired for rational air distribution, choosing among the various Slim and Basic models. (When applied to a fireplace) a tank located inside the Flip, Float, Ghost and Mono 20 hot air outlets contains water that vaporises when the hot air exits the system. This ensures correct humidification of the room. Fragrances and essences can be added to the tank for a pleasant aromatherapy effect. MORE AIR, LESS NOISE. Greater efficiency than traditional systems in terms of air released into the room and a significantly lower noise level. SYMBOLS USED Nominal heat output Efficiency Diameter of smoke outlet pipe Right corner Left corner Right corner with bench Left corner with bench ACTIVE Weight Dimensions - width x depth x height Wall with right-hand bench Wall with left-hand bench TYPE IS NO LONGER A PROBLEM. Because the stoves equipped with the Active system adapt automatically to any pellet length and with a diameter of 6-8 mm. BURNING THE BEST, ALWAYS. Thanks to the extremely reliable and accurate sensor inside the stove, the combustion air is constantly adjusted according to the quantity of pellets present in the grate, thus ensuring effective and efficient combustion, which translates into lower consumption, lower emissions and much less frequent cleaning. FACILITATED INSTALLATION. The combustion is effective and efficient regardless of the type of flue pipe connection which with conventional systems can be a problem during installation. Fluid heat output Minimum room volume Wall Semi-recessed wall 45 corner Hourly consumption corner with right-hand bench OYSTER Fire box dimensions 45 corner with left-hand bench FULLY WATERTIGHT. Products built with Oyster technology, due to their fully watertight structure, do not draw on the oxygen inside the room. Instead, they draw air from the outside and can therefore be fitted in any properly insulated homes and in passive houses. SAFE AND SECURE ENVIRONMENT. This technology eliminates all risk of smoke being released into the room. VENTILATION GRILLES NO LONGER REQUIRED. Forget the annoying flow of cold air that makes the room less comfortable, compromising the overall efficiency of the system and, in some cases, ruining the aesthetic "cleanliness" of the walls. 6 7

4 > STOVES > STOVES ,00 White ceramic_ ,00 Bordeaux ceramic_ ,00 Black ceramic_ ,00 MAX remote control FLAT Comfort Air connection Pellet stove for hot air production with forced convection; the air is released through the front diffuser. Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Reduced depth to facilitate installation in confined spaces; can be installed back to wall. Rear or top smoke outlet pipe. Floor protection For slim stoves. Anthracite painted metal Tempered glass ,00 120,00 Cast iron: grate, door Ceramic: top and right side (left version not available) Painted metal: front panels accessories To build a channelling system kw 8 87,7 % Ø cm 8 kg 125 cm 79 x 29,1 x 107 PHILO Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Fans adjustable to 3 settings. Reduced depth to facilitate installation in confined spaces. Cast iron: grate, door Aluminium: top Painted metal: front panels ,00 White metal_ ,00 Black metal_ ,00 Aluminium metal_ ,00 Bordeaux metal_ ,00 Bronze metal_ , ,00 Serpentino_ ,00 MAX remote control kw 9 87,7 % Ø cm 8 kg 135 cm 90 x 27 x 116 connection Floor protection For slim stoves. accessories To build a channelling system Anthracite painted metal Tempered glass ,00 120,00 FLAIR Comfort Air Pellet stove for hot air production with forced convection; the air is released through the front diffuser. Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Reduced depth to facilitate installation in confined spaces; can be installed back to wall. Rear or top smoke outlet pipe. Cast iron: grate, door Serpentine: top and right side (left version not available) Painted metal: front panels connection Floor protection For slim stoves. accessories To build a channelling system Anthracite painted metal Tempered glass ,00 120,00 kw 8 87,7 % Ø cm 8 kg 130 cm 79 x 29,5 x

5 > STOVES > STOVES Air ,00 Air ,00 Oyster , ,00 White metal_ ,00 - High efficiency pump , ,00 Black metal_ ,00 Red metal_ ,00 Aluminium metal_ ,00 Bordeaux metal_ ,00 White metal_ ,00 Dark metal_ ,00 Silver metal_ ,00 KAIKA Air/Oyster Available in OYSTER for passive houses. Aluminium: front Cast iron: grate, door Allows remote connection with GSM mobile phone , ,00 EGO Air, stainless steel side Bordeaux metal_ ,00 Inox no touch metal_ ,00 Air ,00 kw 6/5,4 92,8 % Ø cm 8 kg 120 cm 45 x 48 x 90 kw 8 91,7 % Ø cm 8 kg 140 cm 52 x 53 x 105,7 External thermostat interface Power board to be inserted into the mother board. Makes it possible to use a remote thermostat. Conduit for additional hopper Air - Comfort Air , ,00 Air ,00 Dark metal_ ,00 Silver metal_ ,00 Bordeaux metal_ ,00 EGO Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology., stainless steel side Terminal check valve + pressure gauge Length 2 m Electronic control - pellet level sensors for remote hopper , ,00 kw 8 91,7 % Ø cm 8 kg 140 cm 52 x 53 x 105,7 accessories To build a channelling system FACE Air, stainless steel side Allows remote connection with GSM mobile phone ,00 EGO Pellet stove for the production of hot air/convective heat and hot water for central heating., stainless steel side kw 6 92,8% Ø cm 8 kg 120 cm 51 x 48 x 91 kw 11,6 91,5 % Ø cm 8 kg 175 cm 52 x 53 x 105,7 kw

6 > STOVES > STOVES Air , , ,00 - High efficiency pump ,00 Salt and pepper ceramic_ ,00 Bordeaux ceramic_ ,00 Old amber ceramic_ ,00 Soapstone_ ,00 STAR Air Ceramic: sides Serpentino_ ,00 Air ,00 kw 8 91,7 % Ø cm 8 kg 140 cm 52 x 53 x 105,7 External thermostat interface Power board to be inserted into the mother board. Makes it possible to use a remote thermostat. Air - Comfort Air ,00 Conduit for additional hopper ,00 STAR Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Ceramic: sides kw 8 91,7 % Ø cm 8 kg 140 cm 52 x 53 x 105,7 Terminal check valve + pressure gauge Length 2 m Electronic control - pellet level sensors for remote hopper accessories To build a channelling system ,00 TUBE Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Separately controlled dual fan, top air outlet., side Metal: painted metal cladding Cast iron: grate Aluminium: top Structure + Black metal_303 Structure + Bronze metal_305 MAX remote control connection , ,00 STAR kw 8 91,7 % Ø cm 8 kg 130 cm 52 x 61 x 119 accessories To build a channelling system Pellet stove for the production of hot air/convective heat and hot water for central heating. Ceramic: sides kw 11,6 91,5 % Ø cm 8 kg 175 cm 52 x 53 x 105,7 kw

7 > STOVES > STOVES Black metal_ ,00 Bordeaux metal_ ,00 Silver metal_ ,00 GEA Air Cast iron: grate, door, front elements Ceramic: top kw 8,7 91 % Ø cm 8 kg 120 cm 49 x 50 x 103 WHILE STOCKS LAST Air ,00 Bordeaux ceramic_ ,00 Red ceramic_ ,00 Salt and pepper ceramic_ ,00 SAGAR Air Cast iron: grate, door, front diffuser Ceramic/Soapstone: top Air ,00 White ceramic_ ,00 White leaves ceramic_ ,00 Soapstone_ ,00 Sand ceramic_ ,00 kw 8 91,7 % Ø cm 8 kg 140 cm 52,2 x 50,8 x 108 SOLAR Air Cast iron: grate, door, front elements Ceramic: top, sides kw 8,7 91 % Ø cm 8 kg 120 cm 49,8 x 50 x 103 WHILE STOCKS LAST 20 21

8 > STOVES > STOVES TOBA Air Cast iron: grate, door Ceramic/Soapstone: front frame Air , ,00 White ceramic_ ,00 Soapstone_ ,00 Bordeaux ceramic_ ,00 Black ceramic_ ,00 NIMA Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Separately controlled dual fan, top air outlet. Cast iron: grate, door Ceramic: sides ,00 White ceramic_ ,00 Warm grey ceramic_ ,00 Bordeaux ceramic_ ,00 Serpentino_ ,00 Sandstone_ ,00 kw 8 91,7 % Ø cm 8 kg 140 cm 52,3 x 51,2 x 111 Sandstone_ ,00 kw 11,5 90,2 % Ø cm 8 kg 160 cm 51,5 x 50,8 x 115,2 TOBA Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Cast iron: grate, door Ceramic/Soapstone: front frame accessories To build a channelling system accessories To build a channelling system kw 8 91,7 % Ø cm 8 kg 140 cm 52,3 x 51,2 x

9 > STOVES > STOVES Air ,00 Air , , ,00 15 (15 kw) ,00 15 (15 kw) , High efficiency pump , High efficiency pump ,00 22 (22 kw) ,00 22 (22 kw) , High efficiency pump 22 with exchanger , High efficiency pump , ,00 22 with exchanger ,00 White metal_ ,00 Salt and pepper ceramic_ ,00 Dark metal_ ,00 Bordeaux ceramic_ ,00 MUSA Air Silver metal_ ,00 Bordeaux metal_ ,00 Air - SUITE Air Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel Old amber ceramic_ ,00 Air - kw 9,5 91,7 % Ø cm 8 kg 160 cm 50,2 x 55,9 x 109,3 MUSA Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. kw 11,5 90,2 % Ø cm 8 kg 160 cm 50,2 x 55,9 x 109,3 MUSA 15/22 Pellet stove for the production of hot air/convective heat and hot water for central heating. 22 comes with a front hot air vent which comes on automatically when the stove is hot. The version with an exchanger for DHW production is also available. Two versions with different power ratings (15/22 kw). accessories To build a channelling system Conduit for additional hopper Terminal check valve+ pressure gauge ACS 110 storage boiler 110 l capacity Attention: ONLY FOR HYDRO 22 MODELS with exchanger 2.5 kw thermostat-controlled electrical resistance kit for cylinder Length 2 m Electronic control - pellet level sensors for remote hopper Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day. Attention: ONLY FOR HYDRO MODELS , , ,00 40A , ,00 kw 9,5 91,7 % Ø cm 8 kg 160 cm 57,8 x 55,9 x 115 SUITE Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel kw 11,5 90,2 % Ø cm 8 kg 160 cm 57,8 x 55,9 x 115 SUITE 15/22 Pellet stove for the production of hot air/convective heat and hot water for central heating. 22 comes with a front hot air vent which comes on automatically when the stove is hot. The version with an exchanger for DHW production is also available. Two versions with different power ratings (15/22 kw). Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel accessories To build a channelling system Conduit for additional hopper Terminal check valve + pressure gauge ACS 110 storage boiler 110 l capacity Attention: ONLY FOR HYDRO 22 MODELS with exchanger 2.5 kw thermostat-controlled electrical resistance kit for cylinder Length 2 m Electronic control - pellet level sensors for remote hopper Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day. Attention: ONLY FOR HYDRO MODELS , , ,00 40A , ,00 kw 15,4 kw 22,3 92,1% 92,5% Ø cm 8 kg 190 cm 50,2 x 55,9 x 109,3 kw 15,4 kw 22,3 92,1% 92,5% Ø cm 8 kg 190 cm 57,8 x 55,9 x 115 kw 13 kw 18 kw 13 kw

10 > STOVES > STOVES Air ,00 Black metal_ , ,00 Silver metal_ ,00 15 (15 kw) ,00 Bordeaux metal_ , High efficiency pump ,00 22 (22 kw) , High efficiency pump ,00 22 with exchanger ,00 White ceramic_ ,00 Black metal_303 With exchanger ,00 Silver metal_313 With exchanger ,00 Bordeaux metal_304 With exchanger ,00 DHW 110 storage cylinder 110 litre capacity ,00 CLUB Air Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel kw 9,5 91,7 % Ø cm 8 kg 160 cm 57,8 x 55,9 x 115 CLUB Comfort Air Possibility of ducting the air into other rooms - up to 8 metres - with the help of MCZ technology. Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel kw 11,5 90,2 % Ø cm 8 kg 160 cm 57,8 x 55,9 x 115 CLUB 15/22 Pellet stove for the production of hot air/convective heat and hot water for central heating. 22 comes with a front hot air vent which comes on automatically when the stove is hot. The version with an exchanger for DHW production is also available. Two versions with different power ratings (15/22 kw). Cast iron: grate, door, front diffuser Ceramic: sides, top, front panel Bordeaux ceramic_ ,00 Sand ceramic_ ,00 Black ceramic_ ,00 Serpentino_ ,00 accessories To build a channelling system Conduit for additional hopper Terminal check valve+ pressure gauge ACS 110 storage boiler 110 l capacity Attention: ONLY FOR HYDRO 22 MODELS with exchanger 2.5 kw thermostat-controlled electrical resistance kit for cylinder Length 2 m Electronic control - pellet level sensors for remote hopper Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day. Attention: ONLY FOR HYDRO MODELS Air , , ,00 40A , ,00 ATHOS Pellet stove for the production of hot air/convective heat and hot water for central heating. Featuring a fan for the distribution of the hot air within the room. HYDRO: production of heating hot water and hot air (not ductable) HYDRO W/HEAT EXCHANGER: production of heating hot water, hot air (not ductable) and domestic hot water. Cast iron: door, front elements, grate Ceramic: top (Black ceramic_107) kw 23,7 kw 16,2 92 % Ø cm 8 kg 200 cm 57,8 x 58,2 x 112 PelletBox NOVA Pellet stove for the production of hot air/convective heat and hot water for central heating. Featuring a fan for the distribution of the hot air within the room. HYDRO: production of heating hot water and hot air (not ductable) HYDRO W/HEAT EXCHANGER: production of heating hot water, hot air (not ductable) and domestic hot water. Cast iron: door, grate Ceramic: sides, top, front panels 2.5 kw thermostat-controlled electrical resistance kit for cylinder Length 2 m Electronic control - pellet level sensors for remote hopper with exchanger = WHILE STOCKS LAST , , ,00 Black ceramic_ ,00 Bordeaux ceramic_ ,00 Desert ceramic_ ,00 Salt and pepper ceramic_ ,00 DHW 110 storage cylinder 110 litre capacity 2.5 kw thermostat-controlled electrical resistance kit for cylinder Length 2 m Electronic control - pellet level sensors for remote hopper , ,00 kw 15,4 kw 22,3 kw 13 kw 18 92,1% 92,5% Ø cm 8 kg 190 cm 57,8 x 55,9 x 115 kw 23,7 kw 16,2 92 % Ø cm 8 kg 200 cm 55 x 55 x 113,5 PelletBox = WHILE STOCKS LAST 26 27

11 > STOVES > STOVES ,00 with exchanger ,00 Bordeaux ceramic_ ,00 Desert ceramic_ ,00 Salt and pepper ceramic_ ,00 Sand ceramic_ ,00 DHW 110 storage cylinder 110 litre capacity ,00 POLAR Pellet stove for the production of hot air/convective heat and hot water for central heating. Featuring a fan for the distribution of the hot air within the room. HYDRO: production of heating hot water and hot air (not ductable) HYDRO W/HEAT EXCHANGER: production of heating hot water, hot air (not ductable) and domestic hot water. Cast iron: door, grate Ceramic: sides, top, front panels 2.5 kw thermostat-controlled electrical resistance kit for cylinder Length 2 m Electronic control - pellet level sensors for remote hopper ,00 kw 23,7 kw 16,2 92 % Ø cm 8 kg 200 cm 55 x 55 x 113,5 PelletBox = WHILE STOCKS LAST VERSIONS Kama silver Aluminium metal_ ,00 NASIK Air Cast iron: grate White lacquered wood or solid oak: base kw 6,6 88,9 % Ø cm 8 kg 130 cm 74 x 48,5 x 89,1 Air ,00 BASE Lacquered white Wood white_ ,00 Oak Wood oak_ ,00 KAMA Air Cast iron: grate Silver coloured steel: top, legs kw 6,6 88,9 % Ø cm 8 kg 130 cm 74,5 x 49 x 93,

12 > MODULO > MODULO CITY Modulo pellet structure ,00 REFLEX Modulo pellet structure ,00 City pellet cladding (as in photo) Absolute Black granite_ ,00 Reflex stainless steel pellet cladding (as in photo) Inox metal_ , , ,00 Modulo pellet structure Reflex rust colour pellet cladding Copper metal_ , , ,00 MODULO CITY Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. MODULO REFLEX Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. connection Absolute Black_201: front cladding Copper metal_309/stainless steel metal_310: front cladding kw 8,7 85% Ø cm 8 kg 270 cm 90 x 51,5 x 150 kw 8,7 85% Ø cm 8 kg 210 cm 90 x 51,5 x 150 CLASS SQUARE Modulo pellet structure ,00 Modulo pellet structure ,00 Class white pellet cladding Cream ceramic_ ,00 Square soapstone cladding Soapstone_ , , ,00 Modulo pellet structure Class bordeaux pellet cladding Bordeaux ceramic_ , , ,00 connection MODULO CLASS Fireplace-stove with steel structure for hot air production and forced convection. Only pellet-burning available. MODULO SQUARE Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. Ceramic (Cream ceramic_104/ Bordeaux ceramic_105): front cladding Soapstone_202: front cladding kw 8,7 85% Ø cm 8 kg 210 cm 90 x 51,5 x 150 kw 8,7 85% Ø cm 8 kg 280 cm 90 x 51,5 x

13 > MODULO MODULO SQUARE VERTIGO Modulo pellet structure Vertigo stripes metal pellet cladding (as in photo) Stripes metal_ , , ,00 connection MODULO VERTIGO Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. Stripes metal_307: front cladding kw 8,7 85% Ø cm 8 kg 210 cm 90 x 51,5 x 150 CUSTOMISABLE MODULO Modulo pellet structure Customisable pellet frame Black metal_ , , ,00 connection CUSTOMISABLE FRAME Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. The front cladding is customisable. Black metal_303: structure kw 8,7 85% Ø cm 8 kg 200 cm 90 x 51,5 x

14 > PANORAMA > PANORAMA Box Panorama Air ,00 Finishing elements , ,00 PANORAMA Pellet stand-alone glass-fronted fireplace with Active System technology. Hot air comes out of the wide upper grate. Maintenance is made easier by removable side panels. You can monitor operation from a control panel located near the tank. Cast iron: grate WHILE STOCKS LAST kw 8,5 91,7 % Ø cm 8 kg 140 cm 74 x 57,5 x 52,8 /CLADDING Box Panorama Air ,00 Mono steel cladding Black metal_ , ,00 ZEN Pellet stand-alone glass-fronted fireplace with Active System technology. The support consists of two twin elements with a different finish. Cast iron: grate Brushed steel: part of the support /CLADDING Box Panorama Air Zen steel cladding Black metal_303 Inox metal_ , , ,00 kw 8,5 91,7 % Ø cm 8 kg 160 cm 90 x 58 x 90 MONO Pellet stand-alone glass-fronted fireplace with Active System technology. Cast iron: grate WHILE STOCKS LAST WHILE STOCKS LAST kw 8,5 91,7 % Ø cm 8 kg 160 cm 75 x 58 x

15 > GLASS-FRONTED FIREPLACES > VIVO > GLASS-FRONTED FIREPLACES > VIVO ø 10 cm ø 6 cm Multi 12 VERSIONS Black metal_303 SLIM kit -2 x Multi 12 outlets -2 x ø 10 cm - L=1.5 m pipes -2 x ø 6 cm pipes -Motor inspection hatches -2 fan units -2 x ø 60 mm clamps -2 x ø 100 mm clamps , ,00 ø 10 cm Multi 20 VERSIONS Black metal_303 BASIC kit -2 x Multi 20 outlets -2 x ø 10 cm - L=1.5 m pipes -2 fan units -4 clamps -2 brackets , ,00 TOTAL 2.780,00 TOTAL 2.980,00 MAX remote control MAX remote control "Blade" convection grille x2 VIVO 80 Pellet SLIM Comfort Air Pellet glass-fronted fireplace for hot air production and forced heat convection. Integrated hood kit; possibility of ducting the air elsewhere with optional accessories. Cast iron: grate kw 10,5 91 % Ø cm 8 kg 150 cm 78,5 x 55 x 68 "Blade" convection grille x2 Passe-partout frame 4 sides. connection VIVO 80 Pellet BASIC Comfort Air Pellet glass-fronted fireplace for hot air production and forced heat convection. Integrated hood kit; possibility of ducting the air elsewhere with optional accessories. Cast iron: grate kw 10,5 91 % Ø cm 8 kg 150 cm 78,5 x 55 x 68 Passe-partout frame 4 sides. connection Support ,00 Support FLIP ventilation outlet Complete with two lamps and air humidifier. FLOAT ventilation outlet Complete with two lamps and air humidifier. GHOST ventilation outlet Complete with 1 lamp and air humidifier. White glass/1 pc. White glass/white frame/1 pc. White glass/black frame/1 pc. White/1 pc. Black/1 pc , ,00 210,00 210,00 210,00 210,00 accessories To build a channelling system Black metal_303 Passe-partout frame 4 sides ,00 accessories To build a channelling system Wireless timed thermostat Designed for connection to MCZ timed thermostats. 4 time brackets per day ,00 Terminal check valve+ pressure gauge ,00 VIVO 80 Pellet Pellet glass-fronted fireplace for the production of hot water for central heating with expansion vessel, EC pump, safety valve, degasser, filler cock. Length 2m Electronic control - pellet level sensors for remote hopper Support ,00 kw 16,7 90,1% Ø cm 8 kg 160 cm 78,5 x 60 x 64,9 kw

16 > VIVO > FIREPLACES > INSERTS VERSION FOR VIVO 80 C/AIR Slim Basic - HYDRO Wall Bronze metal_ ,00 VERSION Black metal_ ,00 Wall Grey metal_ ,00 MAX remote control "Blade" convection grille FRAME Fireplace/wall mounted frame. Powder-coated steel Bronze metal_305/gray metal_306 kg 19 Vivo 80 pellet - cm 120,4 x 6,2 x 90 VERSION FOR VIVO 80 C/AIR Slim Basic - HYDRO BOXTHERM 60 Pellet Pellet insert for hot air production and forced heat convection with incorporated drawer tank. Front air outlet grille. Adjustable hood ventilation outlet - with cap 25x10 cm Frame 4 sides black connection White Brass covered ,00 54, ,00 Wall ,00 Support ,00 kw 6 91,5 % Ø cm 8 kg 80 cm 59 x 45 x 55 VERSION Black metal_ ,00 MODUS MAX remote control Fireplace/wall mounted frame. Sandblasted grey stone_239 kg 55 Vivo 80 pellet - cm 120 x 4 x 90 "Blade" convection grille VERSION FOR VIVO 80 C/AIR Slim Basic - HYDRO Wall ,00 BOXTHERM 70 Pellet Pellet insert for hot air production and forced heat convection with incorporated drawer tank. Front air outlet grille. Adjustable hood ventilation outlet - with cap 25x10 cm Frame 4 sides black White Brass covered ,00 54, ,00 connection Support ,00 PRIME kw 8,8 93,5 % Ø cm 8 kg 120 cm 70 x 55 x 60 Fireplace/wall mounted frame. Slate marble_203 kg 33 Vivo 80 pellet - cm 120 x 4 x

17 > INSERTS BOXTHERM VERSION Black metal_ ,00 Ventilation grille ,00 Adjustable hood ventilation outlet - with cap 25x10 cm White Brass covered ,00 54,00 Frame 4 sides black ,00 POWERBOX Compact Pellet insert for hot air production and heat convection with incorporated drawer tank. kw 8,5 91,7 % Ø cm 8 kg 120 cm 74,1 x 61,2 x 62,2 WHILE STOCKS LAST VERSION Black metal_ ,00 Ventilation grille ,00 Adjustable hood ventilation outlet - with cap 25x10 cm White Brass covered ,00 54,00 Frame 4 sides black ,00 POWERBOX Link Pellet insert for hot air production and heat convection. The pellets are loaded through a top-loading door connected to a Powerbox by a flexible pipe. kw 8,5 91,7 % Ø cm 8 kg 120 cm 74,1 x 61,2 x 62,2 WHILE STOCKS LAST 40 41