470 Series Stamped Stainless Steel Pumps

Size: px
Start display at page:

Download "470 Series Stamped Stainless Steel Pumps"

Transcription

1 470 Series Stamped Stainless Steel Pumps Flows to: 1100 GPM Heads to: 2000 Feet

2 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products steeped in heritage. Since 1873, the American- Marsh line of pumps has withstood the test of time. During the last 130 years, over 100 varieties of pumps have been designed and built. From steam pumps to centrifugal pumps, American-Marsh pumps have been built to meet the ever changing requirements of society. Over the last century through continuous product development, more American-Marsh models have been retired than most other pump manufacturers have ever produced. Hundreds of thousands of pumps have been made, all designed for longevity, allowing many of them to continue servicing customers over 50 years. All of our pumps have three superior characteristics; Design, Performance, and Durability. Our engineering department, which includes an in-house pattern shop, designs each pump so that installation and maintenance is easy. Our performances are engineered to meet or beat the competition in each category. For 130 years, American-Marsh Pumps products have provided cost effective solutions by building pumps to last. Durability by design is always the most cost effective solution. From engineering and design to final assembly, experienced people control each step of the manufacturing process with quality control inspections performed at each step. All pumps shafts are heat straightened. All impellers are computer balanced. Pump testing is done in our new state of the art test facility. All of these factors ensure you receive consistent quality product every time. American-Marsh Pumps has provided quality pump products for over 130 years. At American-Marsh Pumps, we know that long life and superior performance are the keys to satisfied customers. By understanding your needs, we can design products that meet those needs. Our product family reflects years of customer input, product upgrades, redesign and new product development, all focused on meeting and exceeding your expectations Screaming Eagle TDH - FEET 1000 Silver Eagle 500 VM CAPACITY IN U.S. GPM

3 Specifications 470 Series 4 Inch Screaming Eagle Exterior Shell The 4" Screaming Eagle series pumps are designed to fit completely within a 4" inner diameter well. The exterior is completely shrouded in 304 stainless steel to provide maximum protection against corrosion and allowing for maximum pump life. Top End Bell The top of the pump is constructed of 304 stainless steel for maximum corrosion protection. Necessary discharge connections are also located on the top of the pump allowing for easy connection to system piping. An internal, jamfree, non-spin, stainless steel check valve is integral to the discharge of the pump protecting the unit and allowing the unit to run more efficiently over time. This internal check valve also protects the pump against water hammer. Impeller Stack The oversized shaft assembly is constructed of 316 stainless steel allowing for maximum corrosion protection without sacrificing strength requirements. The standard shaft construction utilizes a splined design with 6 points of impeller contact allowing for a stronger design and higher reliability while in service. The drive end of the shaft is splined to allow for easy coupling to the motor. The impellers and diffusers are constructed of precision stamped 304 stainless steel. This is a non lead leaching material designed for maximum safety and health of end user. These impellers and diffusers are optimally designed to provide maximum efficiency and reliability. The Screaming Eagle pumps have internal stainless steel wearing surfaces standard designed to reduce wear normally generated from high thrust applications. A standard built-in sand bearing minimizes abrasion damage from aggressive applications and offers protection against upthrust loads. Bottom End Bell The bottom of the pump is constructed of 304 stainless steel for maximum corrosion protection and also features a standardized, NEMA motor flange connection. This allows the pump to be easily connected to a wide variety of motor manufacturers and ensures maximum flexibility in the field. All removable motor leads are protected while traveling next to the pump as they are encased in a heavy gauge cable guard that is present for the entire length of the pump assembly. An integral suction strainer is present protecting the pump assembly from passing very large solids. 6, 8, 10 & 12 Inch Silver Eagle Exterior Shell The 6" through 12" Silver Eagle series pumps are designed to fit completely within a 6" through 12" inner diameter well. The exterior is completely shrouded in 304 stainless steel to provide maximum protection against corrosion and allowing for maximum pump life. Top End Bell The top of the pump is constructed of 304 stainless steel for maximum corrosion protection. Necessary discharge connections are also located on the top of the pump allowing for easy connection to system piping. An internal, heavy duty, spring loaded, stainless steel check valve is integral to the discharge of the pump protecting the assembly from water hammer and other pressure spikes. Impeller Stack The oversized shaft assembly is constructed of 316 stainless steel allowing for maximum corrosion protection without sacrificing strength requirements. The standard shaft construction utilizes a colleted impeller design, as compared to smaller splined shafts from the competition, allowing for a stronger design and higher reliability while in service. The drive end of the shaft is splined to allow for easy coupling to the motor. The impellers and diffusers are constructed of precision stamped 304 stainless steel. These impellers and diffusers are optimally designed to provide maximum efficiency and reliability. The Silver Eagle pumps have internal stainless steel wearing surfaces standard designed to reduce wear normally generated from high thrust applications. A standard built-in sand bearing minimizes abrasion damage from aggressive applications and offers protection against upthrust loads. Bottom End Bell The bottom of the pump is constructed of 304 stainless steel for maximum corrosion protection and also features a standardized, NEMA motor flange connection. This allows the pump to be easily connected to a wide variety of motor manufacturers and ensures maximum flexibility in the field. All motor leads are protected while traveling next to the pump as they are encased in a heavy gauge cable guard that is present for the entire length of the pump assembly. An integral suction strainer is present protecting the pump assembly from passing very large solids. VM Pump Pump Base The pump base is constructed of high tensile cast iron or other stainless steel material. It is carefully and accurately proportioned to permit smooth flow and to convert high velocity energy of the fluid as it leaves the impeller into pressure. Suction and discharge nozzles are casted integral and are of the inline configuration. Nozzles are available in either a victaulic connection or ANSI flanged connections. All VM models feature a 300 psi case working pressure. Necessary vent and drain openings are provided. Impeller The impeller is of the end suction type, stamped and welded of stainless steel. All impellers are balanced prior to assembly. VM models are available in configurations from 2 through 18 stages. Diffusers The diffuser is constructed of stamped and welded stainless steel. All diffusers are register connected to the suction, discharge and other stages within the pump to minimize internal recirculation losses. Mechanical Seal The mechanical seal assembly is of the cartridge design and is designed to be removed and reinstalled in the pump quickly and efficiently. Seal Chamber The seal chamber is sized for a cartridge mechanical seal. The mechanical seal is constructed of a carbon rotary face, a ceramic stationary face and buna elastomers standard. Motor All VM models utilize standard, stocked, C-Face motors that are available in many different voltages, speeds and enclosures. Each motor can be removed from the unit without complete disassembly of the pump. Also, pumps can be stocked complete, less driver and fully assembled ready for usage when

4 4 Inch Screaming Eagle Sizes: 4" Flows: to 90 GPM Heads: to 2000 Feet Services: Building Trades General Industry Marine Mining & Aggregate OEM Water & Waste Water Impeller Stack 304 stainless steel construction designed for long life and corrosion protection Heavily shrouded fabricated, stamped stainless steel impellers/diffusers Optimally designed impellers and diffusers provide maximum efficiency Stainless steel wearing ring reduces wear from high thrust Oversized 316 stainless steel splined shaft with 6 points of impeller contact for maximum reliability Top End Bell 304 stainless steel top bearing for long life and reliability Internal, jam-free, "non-spin", stainless steel check valve to protect the pumping assembly from water hammer and other pressure spikes. Exterior Shell Constructed of 304 stainless steel for maximum corrosion resistance Unit can be supplied in 316 stainless steel upon request TDH - FEET Screaming Eagle CAPACITY IN U.S. GPM Motor Connection Oversized, splined, 410 stainless steel shaft designed for long life and corrosion resistance NEMA motor connection allowing for ease in mounting to a wide variety of submersible motor manufacturers. Integral strainer designed to protect the pump from pumping large solids.

5 6, 8,10 & 12 Inch Silver Eagle Sizes: 6" to 12" Flows: to 1100 GPM Heads: to 2000 Feet Services: Building Trades General Industry Marine Mining & Aggregate OEM Water & Waste Water Impeller Stack 304 stainless steel construction designed for long life and corrosion protection Heavily shrouded fabricated, stamped stainless steel impellers/diffusers Optimally designed impellers and diffusers provide maximum efficiency Stainless steel wearing ring reduces wear from high thrust Oversized 316 stainless steel colleted shaft for maximum reliability Top End Bell 304 stainless steel top bearing for long life and reliability Internal, heavy duty, spring loaded, stainless steel check valve to protect the pumping assembly from water hammer and other pressure spikes. Exterior Shell Constructed of 304 stainless steel for maximum corrosion resistance Unit can be supplied in 316 stainless steel upon request TDH - FEET Silver Eagle CAPACITY IN 1000 U.S. GPM Motor Connection Oversized, splined, 410 stainless steel shaft designed for long life and corrosion resistance NEMA motor connection allowing for ease in mounting to a wide variety of submersible motor manufacturers. Integral strainer designed to protect the pump from pumping large solids.

6 VM Vertical Multistage Sizes: 1-1/4" to 2-1/2" Flows: to 160 GPM Heads: to 800 Feet Services: Building Trades General Industry Marine Mining & Aggregate OEM Water & Waste Water Upper Pump Housing Constructed of A48 class 30 cast iron, 304 or 316 stainless steel based on application External monitoring port for dry running detection Houses American-Marsh cartridge style mechanical seal for easy servicing in the field Two piece split coupling for easy connection to driver Integral coupling guard to protect user from rotating equipment Motor register machined to receive NEMA or IEC motors upon request Exterior Shell Constructed of 304 stainless steel for maximum corrosion resistance Unit can be supplied in 316 stainless steel upon request TDH - FEET VM Lower Pump Housing Constructed of A48 class 30 cast iron, 304 or 316 stainless steel based on application Vertical inline suction and discharge gauge connections standard Heavy duty ANSI 250# suction and discharge flanges standard Optional victaulic, NPT, oval or metric flanges can be supplied upon request Heavy duty casted base standard to support entire pump assembly CAPACITY IN U.S. GPM

7 Driver Pump unit is designed to accept a NEMA C-face motor standard Wide variety of motor enclosures available for application flexibility IEC motors can be used upon request Impeller/Diffuser Stack Assembly Heavily shrouded impellers/diffusers are constructed of corrosion resistant stamped stainless steel for maximum life and durability Optimally designed impellers and diffusers provide maximum efficiency Wide choice of bearings based on fluid and application specifics Oversized and heavy duty 316 stainless steel shaft standard designed for unplanned loads Complete impeller/diffuser stack assembly can be removed and replaced to bring pump performance back up to factory tolerances

8 Our long tradition of quality pump manufacturing began in 1873 making us one of the first pump manufacturers in this country. American-Marsh Pumps provides the user dependability and durability. Durability by design is always the most cost effective solution. Upper Pump Housing Constructed of A48 class 30 cast iron, 304 or 316 stainless steel based on application External monitoring port for dry running detection Houses American-Marsh cartridge style mechanical seal for easy servicing in the field Two piece split coupling for easy connection to driver Integral coupling guard to protect user from rotating equipment Motor register machined to receive NEMA or IEC motors upon request Impeller/Diffuser Stack Assembly Heavily shrouded impellers/diffusers are constructed of corrosion resistant stamped stainless steel for maximum life and durability Optimally designed impellers and diffusers provide maximum efficiency Wide choice of bearings based on fluid and application specifics Oversized and heavy duty 316 stainless steel shaft standard designed for unplanned loads Complete impeller/diffuser stack assembly can be removed and replaced to bring pump performance back up to factory tolerances Lower Pump Housing Constructed of A48 class 30 cast iron, 304 or 316 stainless steel based on application Vertical inline suction and discharge gauge connections standard Heavy duty ANSI 250# suction and discharge flanges standard Optional victaulic, NPT, oval or metric flanges can be supplied upon request Heavy duty casted base standard to support entire pump assembly OTHER PUMP PRODUCTS SPLIT CASE To 30+" Discharge 30,000+ GPM, 550' VERTICAL TURBINE To 42+" Bowl 45,000+ GPM, 1400+' SELF PRIMER To 12" Discharge 6400 GPM, 260' REGENERATIVE TURBINE To 2-1/2" Discharge 140 GPM, Heads to 750' END SUCTION To 12" Discharge 9000 GPM, 450' American-Marsh Pumps 185 Progress Road Collierville, TN PH: (800) FX: (901) Service/Distribution Centers: Nebraska: 113 South Lincoln Avenue, Hastings, NE (800) California: 3269 East North Building D, Fresno, CA (800) Florida: 2805 Badger Road, Lakeland, FL (800) AM

380 Series Multi-Stage Centrifugal Pumps

380 Series Multi-Stage Centrifugal Pumps 380 Series Multi-Stage Centrifugal Pumps Flows to: 2,500 GPM Heads to: 2100 Feet Temperatures to: 500+ F TDH - Feet 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in

More information

380 Series Multi-Stage Centrifugal Pumps

380 Series Multi-Stage Centrifugal Pumps 380 Series Multi-Stage Centrifugal Pumps Flows to: 4,800 GPM Heads to: 2100 Feet Temperatures to: 500 F TDH - Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in

More information

3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet

3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet 3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction

More information

FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS.

FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS. FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS History and Development Since the early part of this century, Fairbanks Nijhuis Pump has set industry standards in innovative

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and

More information

Full-line Product Overview

Full-line Product Overview Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP. Vertical Turbine Pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP. Vertical Turbine Pump N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP Vertical Turbine Pump For more than 60 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping technology

More information

B. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."

B. HI Compliance: Design, manufacture, and install pumps in accordance with HI Hydraulic Institute Standards. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

End-Suction Centrifugal Pump

End-Suction Centrifugal Pump GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM

More information

End-Suction Centrifugal Pump

End-Suction Centrifugal Pump GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM

More information

Wilo IL Vertical Split-Coupled Inline Pumps

Wilo IL Vertical Split-Coupled Inline Pumps Wilo IL Vertical Split-Coupled Inline Pumps Vertical Inline Split-Coupled, Single Stage Pumps March, 2013 Marcos D. Roimicher, Product Manager BS Market Segment, Product Management Department 120-08-002-0313

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority

More information

Selection V 1 INTRODUCTION PAGE V-2 V 2 SUMP/WELL PUMP SELECTION GUIDE PAGE V-3 V 3 CAN PUMP SELECTION GUIDE PAGE V-4

Selection V 1 INTRODUCTION PAGE V-2 V 2 SUMP/WELL PUMP SELECTION GUIDE PAGE V-3 V 3 CAN PUMP SELECTION GUIDE PAGE V-4 V Selection V 1 INTRODUCTION PAGE V-2 V 2 SUMP/WELL PUMP SELECTION GUIDE PAGE V-3 V 3 CAN PUMP SELECTION GUIDE PAGE V-4 V 4 SUBMERSIBLE PUMP SELECTION GUIDE PAGE V-5 V 5 LOW LIFT PUMP SELECTION GUIDE PAGE

More information

D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.

D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP. Vertical high-flow pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP. Vertical high-flow pump N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP LS BARGE For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology

More information

GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM

GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general

More information

PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016

PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016 SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.

More information

TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS

TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS PACO VSM/VSMS TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS Close and Split Coupled VERTICAL SPACE MISER Type VSM (Close Coupled) Type VSMS (Split Coupled) SMALL FOOTPRINT FOR TIGHT SPACES > Vertically mounted

More information

Industrial. Solutions brands you trust. Product Overview

Industrial. Solutions brands you trust. Product Overview Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications

More information

EVMSU - Vertical Multistage Pumps. Product Catalog

EVMSU - Vertical Multistage Pumps. Product Catalog EVMSU - Vertical Multistage Pumps Product Catalog www.pumpsebara.com Built like a Kata a A Katana is a traditional Japanese sword made with distinctive, longstanding expertise started in 300 A.D. Katana

More information

VPC Vertical Turbine, Double Case Pump

VPC Vertical Turbine, Double Case Pump VPC Vertical Turbine, Double Case Pump Experience In Motion Pump Supplier to the World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 Building Services Piping. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

ROWA -HP High-Pressure Centrifugal Pump

ROWA -HP High-Pressure Centrifugal Pump ROWA -HP High-Pressure Centrifugal Pump 2 Pump Type ROWA -HP Quality through Experience Fields of Application Handling of clean to slightly contaminated corrosive liquids up to discharge pressures of 100

More information

Locations Include: Food & Beverage. Chemical. Waste Water Treatment. Pulp & Paper. Energy, Oil & Gas

Locations Include: Food & Beverage. Chemical. Waste Water Treatment. Pulp & Paper. Energy, Oil & Gas Locations Include: Memphis, TN Jackson, TN Little Rock, AR Springdale, AR Tupelo, MS Food & Beverage Chemical Waste Water Treatment Pulp & Paper Energy, Oil & Gas 1721 Corporate Avenue Memphis, TN 38118

More information

Commercial, Residential & Institutional Pumps, Tanks, & Accessories

Commercial, Residential & Institutional Pumps, Tanks, & Accessories Taco International Commercial, Residential & Institutional Pumps, Tanks, & Accessories Taco Catalog # : 300-6.0 Supersedes: 300-3.5 9/11/06 Effective Date: 03/21/07 Printed in USA Pumps FI Frame Mounted

More information

TYPE LF/LC/LCV END SUCTION PUMPS

TYPE LF/LC/LCV END SUCTION PUMPS PACO LF/LC/LCV TYPE LF/LC/LCV END SUCTION PUMPS Close Coupled and Frame Mounted END SUCTION PUMPS Type LF (Frame Mounted) Type LC (Close Coupled) Type LCV (Vertically Mounted Close Coupled) Grundfos CBS

More information

DUPLEX CONDENSATE TANK SYSTEM

DUPLEX CONDENSATE TANK SYSTEM DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

Series SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec

Series SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30

More information

Domestic Pump Condensate Transfer Equipment

Domestic Pump Condensate Transfer Equipment Bulletin S-944L Domestic Pump Condensate Transfer Equipment CONDENSATE RETURN UNITS BOILER FEED UNITS LOW NPSH PUMPS VACUUM HEATING UNITS INDUSTRIAL VACUUM UNITS www.domesticpump.com Condensate Return

More information

TECHNICAL. Series 18. Pump Packages

TECHNICAL. Series 18. Pump Packages TECHNICAL S Y S T E M S Series 18 Pump Packages Series 18 Pump Packages Standard Features Close-coupled, end-suction, centrifugal pumps Mounted and wired pump starters Hand-Off-Auto switch for each pump

More information

DNJ SERIES PUMPS END SUCTION CLOSE COUPLED

DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards

More information

Corporate Capabilities

Corporate Capabilities Corporate Capabilities CPS-Pumps 125 Morrison Drive Rossville, TN 38066 Phone: (901) 850-5115 Fax: (901) 850-5119 Commercial The Commercial use an incredible amount of centrifugal equipment. These applications

More information

FBSMS FLUX BOOSTING SYSTEMS

FBSMS FLUX BOOSTING SYSTEMS FBSMS FLUX BOOSTING SYSTEMS Aplications FLUX BOOSTING SYSTEM is made up of a water pump and an electronic pump controller which is used for: Residential irrigation applications when is necessary to boost

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SMF. Vertical Submersible Pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SMF. Vertical Submersible Pump N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SMF Engineering Excellence More Than 60 Years Developing The Pumping Technology That Drives Progress Ruhrpumpen is an innovative and efficient pump technology

More information

MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE

MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE Seal-less Design Price Pump magnetically driven, seal-less pumps provide a leak-proof

More information

Experience In Motion. WXH and WXM Utility-Grade Multistage Ring Section Pumps

Experience In Motion. WXH and WXM Utility-Grade Multistage Ring Section Pumps Experience In Motion WXH and WXM Utility-Grade Multistage Ring Section Pumps High reliability and performance in rapid-cycling applications The WXH and WXM multistage ring section pumps are specifically

More information

MARLOW PUMPS RECIRCULATION

MARLOW PUMPS RECIRCULATION End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features

More information

C. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.

C. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers. SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.

More information

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate

More information

BVERTTURB ITT. Goulds Pumps. Vertical Turbine Pumps. Engineered for life

BVERTTURB ITT. Goulds Pumps. Vertical Turbine Pumps. Engineered for life ITT BVERTTURB Goulds Pumps Vertical Turbine Pumps Engineered for life Short Set Vertical Turbine Pumps Capacities to 20,000 GPM (4545 m 3 /hr) Heads to 1,500 feet (457 m) Bowl sizes from 5 to 30 Design

More information

SENTRA Series Water Unit

SENTRA Series Water Unit SENTRA Series Water Unit Standard Unit: F to 0 F Process Fluid Temperatures* Optional High Temperature Configuration to 0 F Direct Injection Cooling 0 to kw Heaters to 7. HP Centrifugal Pumps (0-00 GPM)

More information

5. CONDENSATE PUMPS/UNITS

5. CONDENSATE PUMPS/UNITS INDEX Condensate Systems/Pumps GENERAL INFORMATION BURKS PARTS I&O MANUALS. CONDENSATE PUMPS/UNITS PUMP TYPES: GV GV6 USA: (937) 778-8947 Canada: (90) 47-6223 International: (937) 61-398 A 7/1 Condensate

More information

VTP Vertical Turbine, Wet-Pit Pump

VTP Vertical Turbine, Wet-Pit Pump VTP Vertical Turbine, Wet-Pit Pump Experience In Motion Pump Supplier to the World 2 Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

PREMIUM MAGNETIC-DRIVE SEALLESS CENTRIFUGAL PUMPS DB & SP SERIES

PREMIUM MAGNETIC-DRIVE SEALLESS CENTRIFUGAL PUMPS DB & SP SERIES PREMIUM MAGNETIC-DRIVE SEALLESS CENTRIFUGAL PUMPS PUMPING SOLUTIONS AROUND THE WORLD QLVKWKRPSVRQ FRP DB SERIES SP SERIES MAGNETIC DRIVE, SEALLESS, CENTRIFUGAL PUMPS DB SERIES FLOODED SUCTION Backed by

More information

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product

More information

CPO N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. ASME/ANSI B73.1 Chemical Process Pump. Springer Pumps, LLC

CPO N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. ASME/ANSI B73.1 Chemical Process Pump. Springer Pumps, LLC N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Tel: 866-777-66 Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide

More information

HOMA Pump, Ansonia Connecticut

HOMA Pump, Ansonia Connecticut TM High Performance in HOMA began as a submersible motor manufacturer more than fifty years ago. We expanded into full pump production in the 1960s. Every product we design and manufacture has always exceeded

More information

FLANGE-MOUNT CENTRIFUGAL PUMPS

FLANGE-MOUNT CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications

More information

INDUSTRIAL AND MARINE PUMPING SOLUTIONS

INDUSTRIAL AND MARINE PUMPING SOLUTIONS INDUSTRIAL AND MARINE PUMPING SOLUTIONS WHEN THE GOING GETS TOUGH THE TOUGH KEEP GOING AND GOING AND GOING AND GOING AND GOING... GILKES PUMPING SYSTEMS PUMPING SYSTEMS INDUSTRIAL AND MARINE PUMPING SOLUTIONS

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services Horizontal Split Case For more than 6 years the name Ruhrpumpen

More information

LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.

LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage. LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal

More information

Silhouette. Feedwater Heater. Boiler Feedwater

Silhouette. Feedwater Heater. Boiler Feedwater Roth Roth Low Low Silhouette Silhouette TRAY DEAERATORS Boiler Boiler Feedwater Feedwater Heater Heater Capacities Capacities to to 50,000 50,000 lb/hr lb/hr Model RDTV-150-5-1-2 vertical tray type deaerator

More information

A. Codes and Standards that are Standard at the University:

A. Codes and Standards that are Standard at the University: PART 1: GENERAL 1.01 Purpose: 1.02 References: 1.03 Requirements: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The

More information

.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.

.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems. Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780

More information

Goulds Trash Hog. Self-Priming Solids Handling Pumps

Goulds Trash Hog. Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures

More information

Unequaled I Unrivaled I Performance

Unequaled I Unrivaled I Performance Unequaled I Unrivaled I Performance Peerless Pump - 2005 Dr Martin Luther King Jr Street, Indianapolis, IN 46202 Ph: (317) 925-9661 fax: (317) 924-7388 www.peerlesspump.com www.epumpdoctor.com VERTICAL

More information

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions. Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC N N O V A T I O N E F F I C I E N C Y Q U A L I T Y In-Line Pumps IIL / IVP / IVP-CC For more than 0 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping

More information

Goulds Large Capacity, Single Stage, Double Suction Pump

Goulds Large Capacity, Single Stage, Double Suction Pump Goulds 3498 Large Capacity, Single Stage, Double Suction Pump 3498 Double Suction Pumps Designed for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services Capacities to 8,00 m 3 /h

More information

569, 570, 571, 572 Series

569, 570, 571, 572 Series Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP

DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and

More information

B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).

B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes). Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage

More information

Centrifugal Pump Efficiency Improvement Alternate Methods and Design Methodology

Centrifugal Pump Efficiency Improvement Alternate Methods and Design Methodology Centrifugal Pump Efficiency Improvement Alternate Methods and Design Methodology 20Nov, 2009 1 Introduction Wide Usage Industrial Agricultural Domestic Varied Designs Centrifugal Pumpsets Regenerative

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS 0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.

More information

Multistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR

Multistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR Multistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR General DICKOW-pumps of series HZ/HZA are single- or multistage centrifugal pumps with shaft sealing. Application HZ/HZA-pumps are applied

More information

CR A-F-A-E-HQQE 3x400/ HZ

CR A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR45-12-2 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122818 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122818/cr-45-12-2-a-f-a-e-hqqe.html

More information

A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.

A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals. SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Horizontal Split Case Pumps Type U

Horizontal Split Case Pumps Type U Horizontal Split Case Pumps Type U 7.1 7.2 Stage U Type Pumps Features: Axially Split Case Design Range from 20M 3 /Hr to 600M 3 /Hr Two Stage Pump Single Suction Twin Volute Casing Design Closed type

More information

SELF-PRIMING PUMPS CORNELL PUMP COMPANY STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM EFFICIENT BY DESIGN FIVE-YEAR WARRANTY

SELF-PRIMING PUMPS CORNELL PUMP COMPANY STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM EFFICIENT BY DESIGN FIVE-YEAR WARRANTY CORNELL SELF-PRIMING PUMPS STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM FIVE-YEAR WARRANTY SELF-PRIMING PUMPS CORNELL Efficient, durable, innovative and dependable are all words that

More information

KEENER GRINDER PUMPS

KEENER GRINDER PUMPS KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual

More information

Hard-hitting Contenders In HVAC Fluid Handling Solutions

Hard-hitting Contenders In HVAC Fluid Handling Solutions Hard-hitting Contenders In HVAC Fluid Handling Solutions Patterson Enters the HVAC Arena With a Reputation for Quality and Reliability! Applications for All Patterson HVAC Pumps Chill Water Condenser Water

More information

Simsite. Impellers and Wear Rings. Improve Longevity & Performance with Simsite Products!

Simsite. Impellers and Wear Rings. Improve Longevity & Performance with Simsite Products! Simsite Impellers and Wear Rings Improve Longevity & Performance with Simsite Products! What is Simsite? Sims the proven name in pump technology For more than 70 years, the Sims Pump Valve Company has

More information

M-Series Vertical Turbine Pumps. BULLETIN 3A.1 June 2003

M-Series Vertical Turbine Pumps. BULLETIN 3A.1 June 2003 M-Series Vertical Turbine Pumps BULLETIN 3A.1 June 03 A-C Vertical Turbine Pumps Flexibility by Design: Four Pump Models, One Common Bowl Assembly Model MVT-FF Driver Model MVC Driver The four different

More information

Goulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps

Goulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units

More information

Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps

Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps Goulds Pumps Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail

More information

ETP Series - Self Priming Pumps

ETP Series - Self Priming Pumps ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are

More information

569, 570, 571, 572 Series

569, 570, 571, 572 Series Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

CR20-07 A-F-A-E-HQQE 3x400/ HZ

CR20-07 A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR2-7 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 965513 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965513/cr-2-7-a-f-a-e-hqqe.html

More information

PAPANTONATOS. We supply clean water and remove waste water. P u m p s s e r v ic e & e n g i nee r in g. submersible pumps. s e w a g e p u m p s

PAPANTONATOS. We supply clean water and remove waste water. P u m p s s e r v ic e & e n g i nee r in g. submersible pumps. s e w a g e p u m p s PAPANTONATOS P u m p s s e r v ic e & e n g i nee r in g We supply clean water and remove waste water s e w a g e p u m p s submersible pumps The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45

More information

4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction

4VH and 4VHX. 4 Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction 4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Water and Other.00

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. ASME/ANSI B73.1 Chemical Process Pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. ASME/ANSI B73.1 Chemical Process Pump N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide with innovation

More information

CR64-1 A-F-A-E-HQQE 3x400D 50 HZ

CR64-1 A-F-A-E-HQQE 3x400D 50 HZ GRUNDFOS DATA BOOKLET CR64-1 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 96123527 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96123527/cr-64-1-a-f-a-e-hqqe.html

More information

CR A-F-A-V-HQQV 3x400D 50 HZ

CR A-F-A-V-HQQV 3x400D 50 HZ GRUNDFOS DATA BOOKLET CR9-1-1 A-F-A-V-HQQV 3x4D 5 HZ Grundfos Pump 9612486 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612486/cr-9-1-1-a-f-a-v-hqqv.html

More information

CR A-F-A-E-HQQE 3x400D 50 HZ

CR A-F-A-E-HQQE 3x400D 50 HZ GRUNDFOS DATA BOOKLET CR64-2-2 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 96123528 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96123528/cr-64-2-2-a-f-a-e-hqqe.html

More information

CR32-4 A-F-A-E-HQQE 3x400D 50 HZ

CR32-4 A-F-A-E-HQQE 3x400D 50 HZ GRUNDFOS DATA BOOKLET CR32-4 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9612213 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612213/cr-32-4-a-f-a-e-hqqe.html

More information

Goulds Trash Hog. Self-Priming Solids Handling Pump

Goulds Trash Hog. Self-Priming Solids Handling Pump Goulds Trash Hog Self-Priming Solids Handling Pump Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6,000 GPM (1,363 m3/h) Heads to 140 feet (43 m) Temperatures

More information

30 F to 300 F Process Temperatures* 1/2 to 7.5 HP Centrifugal Pumps ( GPM) 3/8-1 Solenoid Cooling Valves (VE & 300 F models)

30 F to 300 F Process Temperatures* 1/2 to 7.5 HP Centrifugal Pumps ( GPM) 3/8-1 Solenoid Cooling Valves (VE & 300 F models) Temperature Control Units Water & Oil - 00 F Portable Chillers Air & Water-Cooled 0-70 F Central Chillers Air & Water-Cooled Packages & Modules 0-70 F Pump Tank Stations Chilled or Tower Water 00-00 gallons

More information

CRN A-F-G-E-HQQE 3x400D 50 HZ

CRN A-F-G-E-HQQE 3x400D 50 HZ GRUNDFOS DATA BOOKLET CRN45-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96123118 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/96123118/crn-45-2-2-a-f-g-e-hqqe.html

More information

UPZ PUMP POWER FOR TOP PERFORMANCE UNDER

UPZ PUMP POWER FOR TOP PERFORMANCE UNDER Submersible borehole pump People at KSB we make your world flow round! UPZ PUMP POWER FOR TOP PERFORMANCE UNDER THE TOUGHEST CONDITIONS UPZ is top choice wherever submersible borehole pumps have to satisfy

More information

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.

Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions. Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

Design and Construction Standards SECTION PLUMBING EQUIPMENT

Design and Construction Standards SECTION PLUMBING EQUIPMENT SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES: A. Water heaters. B. Packaged water heating systems. C. Water storage tanks. D. Water softeners. E. Pumps. F. Circulators. 1.2 REFERENCES

More information

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.

More information

K-Series Stainless Steel Products Submersible, End-Suction and Multistage Centrifugal Pumps

K-Series Stainless Steel Products Submersible, End-Suction and Multistage Centrifugal Pumps K-Series Stainless Steel Products Submersible, End-Suction and Multistage Centrifugal Pumps Product Quality, Reliability and Support You Expect www.catpumps.com More Solutions for your Pumping Needs The

More information

CRN90-1 A-F-G-V-HQQV 3x400D 50 HZ

CRN90-1 A-F-G-V-HQQV 3x400D 50 HZ GRUNDFOS DATA BOOKLET CRN9-1 A-F-G-V-HQQV 3x4D 5 HZ Grundfos Pump 96124237 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn9/96124237/crn-9-1-a-f-g-v-hqqv.html

More information