WAV-26 UPRIGHT WIDE AREA VACUUM

Size: px

Start display at page:

Download "WAV-26 UPRIGHT WIDE AREA VACUUM"

Russell Carson
6 years ago
Views:

PARTS & OPERATING MANUAL WAV-26 UPRIGHT WIDE AREA VACUUM PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine.

1 PARTS & OPERATING MANUAL WAV-26 UPRIGHT WIDE AREA VACUUM PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage equipment, furniture or buildings. For new books, please download your copy from our website or write to: Pacific Floorcare 2259 S. Sheridan Drive Muskegon, MI Carefully inspect all components to ensure that there is no concealed freight damage. If such damage is discovered, file a CONCEALED DAMAGE REPORT immediately with the delivering carrier. The contents of this manual are based on the latest product information available at the time of publication. Pacific reserves the right to make changes or improvements without notice. Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better serve you over the lifetime of the product. For quick and easy registration, go to: Product.

2 IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS IN THIS BOOK BEFORE USING THIS MACHINE! If you do not understand, ask your supervisor. WARNING: To reduce the risk of fire, electric shock, or injury: 1. DO NOT USE THIS VACUUM FOR PICK UP OF WET DEBRIS. 2. Do not use outdoors or on wet surfaces. 3. Do not allow to be used as a toy. Close attention is necessary when used by or near children. 4. You must be trained to operate this machine. Operate this machine for its intended use only. 5. Do not operate this machine unless it is completely assembled. The dust bag and/or filters must be in place. Use only manufacturer s attachments. 6. Keep the machine and its electrical components dry. Do not subject to rain. Store the machine in a dry building area. Clean the machine with a dry cloth only. 7. Machines can cause an explosion when near flammable materials and vapors. Do not use or store this machine with or near fuels, grain dust, solvents, thinners, or other flammable materials. Do not use flammables to clean this machine. 8. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes. 9. Maintenance and repairs must be done by a qualified or authorized service center. 10. If the machine is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, bring it to a service center. 11. Connect to a properly grounded outlet only (See Grounding Instructions). 12. To prevent electric shock, always remove the electrical plug from the electrical outlet before doing any repairs or maintenance and when leaving the machine unattended. Do not handle plug or vacuum with wet hands. 13. Do not pull cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces. Do not use with damaged cord or plug. 14. Turn off all controls before unplugging. 15. Do not put objects into openings. Do not use with any opening blocked: keep free of dust, lint, hair and anything that may reduce airflow. 16. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts. 17. Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine. 2

3 IMPORTANT SAFETY INSTRUCTIONS This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the machine. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This machine is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illustrated in figure A. A temporary adapter that looks like the adapter illustrated in figures B and C may be used to connect this plug to a 2-pole receptacle as shown in figure B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (figure A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code EXTENSION CORDS Use only three-wire 14/3 or larger gauge approved extension cords that have three-prong grounding type plugs and three-pole receptacles that accept the appliance s plug. Replace or repair any damaged cords or plugs. NOTE: Do not use adapters shown in figures B & C in Canada When servicing, refer to authorized person only. Use only identical replacement parts. WIRING DIAGRAM Vacuum & Brush Switch Part # Harness Part # White White White Black Green Vacuum Motor White Black Green Brush Motor Cord Assembly Part #

4 OPERATING INSTRUCTIONS WARNING! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT! NEVER USE THIS MACHINE TO PICK UP VOLATILE OR EXPLOSIVE MATERIALS! The model shown in this manual is intended for commercial use. PREPARATION To prepare the machine for operation, make sure it is of correct voltage and properly assembled. If in doubt, ask your supervisor. 1. Properly install the filter bag in the vacuum: Use the latch at the rear of the machine (opeator s position). Tilt the cover back until it is fully open. The filter bag inlet is designed with a rubber gasket that fits securely over the bag adapter. Push the filter bag inlet over the adapter until it contacts the inside of the cover. Replace the filter bag when full. OPERATION 1. Plug the machine s power cable into a properly grounded outlet (see Grounding Instructions). 2. Depress the foot pedal to tilt the handle back to the operating position. 3. Adjust the brush height with the lever located on the right side of the machine near the floor. 4. Turn the switch ON and begin vacuuming. OPERATION WITH TOOLS An optional on-board tool kit is available for the vacuum - Part Number This kit includes an onboard tool bag, a dusting tool, crevice tool, stretch hose assembly and two piece wand assembly. Fifteen (15) feet of hose is provided which allows access to rooms without moving the machine. 1. The switch should be turned OFF. 2. Depress the foot pedal to tilt the handle into the upright position. The brush will be off the floor in this position. 3. Remove the bottom hose cuff from the base of the machine and attach the accessory hose by pressing the insert located within the cuff of the accessory hose together with the cuff of the machine hose until there is a tight fit between the two hoses. Then attach the tool of choice. 4. Turn the switch ON and begin. Note: The switch should be OFF when switching between the accessory and the brush positions. MAINTENANCE ALWAYS turn the switch OFF and UNPLUG the power cord from the electrical outlet before doing any clean-up or repairs, and when the machine is left unattended. AFTER EACH USE: 1. Vacuum filter bag: If the bag is full or damaged install a new one. Filter Bag, 10 Pack Part Number Cloth Bag (optional) Part Number Power cord and plug: Check for cuts or nicks; if damaged, have the cord replaced at a factory authorized service center. 3. Wheels: Remove any strings or debris that may restrict the free movement of the wheels. 4. Tools: Inspect the tools to ensure there is no obstruction of airflow. Remove any debris found. 5. Brush: Remove any strings or debris. Replace if it becomes worn or damaged. 4

5 MAINTENANCE WEEKLY: 1. Inspect and clean the vacuum inlet filter. Open the bag door at the rear of the machine. At the bottom of the chamber is the inlet filter. Remove the filter from the machine by pulling it off of the vacuum motor. You may need to remove your bag to access this freely. The filter is constructed of foam attached to a plastic mounting ring. Slide the filter off and clean it by shaking or vacuuming. Replace it if there are any rips, tears or it can t be cleaned. 2. Inspect and clean the exhaust filter. It is located under the handle of the machine (see page 14). Remove the two knobs to access the filter and clean by shaking, vacuuming or washing with water. Replace if there are any rips, tears or if it can t be cleaned. VACUUM MOTOR MAINTENANCE: Have the vacuum motor inspected annually by a factory authorized service technician. If the carbon brushes are worn, they should be replaced. This service will prolong the life of the motor. 5

6 6 7 2 WAV-26 WIDE AREA VACUUM - BRUSH ASSEMBLY ITEM PART NUMBER DESCRIPTION QTY BRUSH, WAV 3 INCH DIAMETER GUARD, THREAD HOUSING, BEARING SHAFT, LONG SHAFT, SHORT BEARING, BRUSH SHAFT SCREW, FLAT, TAP, 4-24 X BRUSH ROLL ASSEMBLY* 1 *Includes items 1,2,4,5,6 & 7 6

7 WAV-26 WIDE AREA VACUUM - LEVER & WHEEL ASSEMBLY ITEM PART NUMBER DESCRIPTION QTY LABEL, HEIGHT, BRUSH PIN, TAPERED SHAFT, WLDMNT, WHEEL WHEEL, 1.5 DIA, 2.5L NUT, HEX, NYLOCK, SCREW, PAN, #10-32 X SCREW, SHLDR,.38,.31-16, WASHER, LOCK, SPLIT, #10 1 7

8 WAV-26 WIDE AREA VACUUM - SHOE ASSEMBLY BRUSH ASSEMBLY WHEEL ASSEMBLY

9 ITEM PART NUMBER DESCRIPTION QTY BELT, V, BRUSH COLLAR, CLAMP,.38D MOTOR, BRUSH, WAV PULLEY, BRUSH PULLEY, BRUSH MOTOR SHOE, WELDMENT, BRUSH SCREW, PAN, #10-32 X SCREW, FLAT, #8-32 X WASHER, LOCK, SPLIT, # W168D SCREW, SET,.25-20, W401D WASHER, FLAT, #10 3 9

10 WAV-26 WIDE AREA VACUUM - BASE ASSEMBLY SHOE ASSEMBLY

11 ITEM PART NUMBER DESCRIPTION QTY BUMPER, EXTRUSION, OPEN GASKET, SHOE, 0.38 X HOUSING, BASE LEVER, FOOT, HANDLE SPRING, EXTENSION NUT, HEX, NYLOCK, SCREW, PAN, #10-32 X SCREW, FLAT, TAP, 4-24 X SCREW, SHLDR,.38,.31-16, SCREW, #8X.75, PHIL TRUSS SS WASHER, LOCK, SPLIT, # W136D SCREW, TAP, #8 X W329D NUT, HEX, # W401D WASHER, FLAT, #

12 WAV-26 WIDE AREA VACUUM - HANDLE ASSEMBLY SECTION A-A SECTION B-B

13 ITEM PART NUMBER DESCRIPTION QTY ITEM PART NUMBER DESCRIPTION QTY LATCH, OVER-CENTER SWITCH, ROCKER, 20A 125 VAC POST, LATCH TERMINAL, FEM, FLAG (NOT SHOWN) WHEEL, RUBBER CABLE,.062 DIA, 15 INCH LONG WASHER, THRUST, FIBER NUT, NYLOCK, # FILTER, INLET, VACUUM NUT, 0.50 INCH PIPE LOCK HEPA FILTER (OPTIONAL) SCREW, PAN, #10-32 X GASKET, MOTOR MOUNT SCREW, PAN, #8-32 X ADAPTER, HOSE SCREW, PAN, #10 X 0.75, AB BAG, VACUUM, UPRIGHT WAV (10 PK) SCREW, FLT, #8-32 X BAG, VACUUM, CLOTH (OPTIONAL) WASHER, LOCK, SPLIT, BRACKET, STOP, HANDLE WASHER, LOCK, SPLIT, # COVER, REAR, WELDMENT WASHER, LOCK, #8 INT TOOTH GASKET, ADAPTER, HOSE 1 33 A13020 STRAIN RELIEF, CABLE GASKET, LINEAR, THICK 1 34 S482P CAP, SNAP, AXLE GROMMET,.31 ID,.56 HOLE 1 35 S611A CLAMP, HOSE, WORM HANDLE, UPRIGHT 1 36 S936P TERMINAL, MALE (NOT SHOWN) HOSE, VACUUM, 90 DEG CUFF 1 37 W104D WASHER, FLAT, HARNESS, 24INCH WAV 1 38 W136D1 SCREW, #8 X.5 TAP MOTOR, VAC, 2STG, 120V, TH 1 39 W143D NUT, # PLATE, MOUNTING, SWITCH 1 40 W169D SCREW, HEX, X SHAFT, WLDMNT, WHEEL 1 41 W329D NUT, HEX, # CORD, 50FT, YELLOW (NOT SHOWN) 1 42 W401D WASHER, FLAT, #

14 WAV-26 WIDE AREA VACUUM - FINAL ASSEMBLY 1 HANDLE ASSEMBLY BASE ASSEMBLY

15 ITEM PART NUMBER DESCRIPTION QTY LABEL, PACIFIC FLOORCARE LABEL, SERIAL NUMBER LABEL, WARNING COVER, EXHAUST, BOTTOM FILTER, EXHAUST KNOB, #10-32 X PLATE, SUPPORT, FOAM SPACER, NYLON,.41ID X.88OD X SPACER, NYLON,.41ID X.88OD X SCREW, SHLDR,.38,.31-16, W136D SCREW, TAP, #8 X FOAM, SOUND REDUCTION 1 15

655003 ON BOARD HAND TOOL KIT (OPTIONAL) For those that would like or require tools with the wide area vacuum, there is an on board tool kit available as an accessory.

16 ON BOARD HAND TOOL KIT (OPTIONAL) For those that would like or require tools with the wide area vacuum, there is an on board tool kit available as an accessory. You must order the complete tool kit (#655003) to be able to attach it to your unit but replacement parts for this kit are listed below. To assemble your on board tool kit to your upright wide area vacuum, please use the template on the following page and follow the instructions on how to place the snaps to mount the bag on page Wand (2 pcs req d) Crevice Tool Stretch Hose Assm- 10 ft Dusting Tool Tool Bag Snap, Self- Drilling (6 pcs req d) 16

17 ON BOARD HAND TOOL KIT SNAP PLACEMENT TEMPLATE Start screw & snap at these three points indicated by plus sign Cut Here Start screw & snap at these three points indicated by plus sign Cut Here Cut Here Left Side of Unit from Operator s Position Cut Here Cut Here Right Side of Unit from Operator s Position

INSTRUCTIONS TO MOUNT 655003 ON BOARD HAND TOOL KIT 1. Cut out templates on page 17 2.

Use a powered drill to screw the self-tapping snaps into the handle at each + mark (Figure 2) Note: Do

19 INSTRUCTIONS TO MOUNT ON BOARD HAND TOOL KIT 1. Cut out templates on page Align the template up to the correct side (right or left) of the handle (Figure 1) 3. Use a powered drill to screw the self-tapping snaps into the handle at each + mark (Figure 2) Note: Do not over torque the screws as they can strip out 4. Tear away templates 5. Mount the bag to the snaps and store tool kit Figure 1 Figure 2 19

20 WARRANTY POLICY WIDE AREA VACUUM, WAV-26 The Pacific Floorcare WAV-26 wide area vacuum has been manufactured, tested and inspected in accordance with specific engineering requirements and is WARRANTED to be free from defects in workmanship and materials as follows: Five (5) years parts, One (1) year labor - Rotationally molded polyethylene components One (1) year parts and labor All other components unless excluded below. This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with Pacific Operating and Maintenance instructions. This warranty does not apply to the following wear parts and accessories of the machine including: Part Number Part Name Cord Assembly Paper Filter Bags-10 pk Cloth Filter Bag Filter HEPA Filter Exhaust Filter Brush Assembly Hose Belt Optional On Board Tool Kit Nor does it apply to damage or failure caused by improper use, abuse or neglect. Warranty credit or replacement of return parts including motors, etc., is subject to incoming inspection of those items. To secure repair under this warranty, the following procedure should be taken: The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty. Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional charge or cost to the user. Only Pacific or its authorized dealers and agents may make no charge warranty repairs on this product. All others do so at their own risk. This warranty limits Pacific liability to the repair of the product and/or warranted parts replacement and does not include incidental or consequential damages arising from the use of a Pacific machine whether defective or not. This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user. 10/ S. SHERIDAN DRIVE MUSKEGON, MICHIGAN FAX

WAV-30 WIDE AREA VACUUM

PARTS & OPERATING MANUAL WAV-30 WIDE AREA VACUUM PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before starting