EXHAUSTO Inc in North America In Atlanta since ,000 sq.ft. office and warehouse 86 authorized sales and service offices in USA and Canada.

Transcription

1 EXHAUSTO Inc in North America In Atlanta since ,000 sq.ft. office and warehouse 86 authorized sales and service offices in USA and Canada.

2 The First Fan The first chimney fan - a first worldwide and the foundation of EXHAUSTO s existence

3 A 50-year Old Company Founded in ,000+ sq.ft. of manufacturing and administration High-tech ISO 9001 certified manufacturing facilities

4 Certifications

5 Mechanical Draft Systems

6 Products RSV Fan Capacity: 6,000 MBH on CAT I Appliances 10,000 MBH on CAT IV Appliances 3/16 Cast aluminum housing Hinged for easy service and cleaning Direct drive Class H insulated motor Maintenance free 482 ºF Continuous Duty 575 ºF Intermittent Duty UL 378 Draft Equipment

7 Products RSV Fan The RSV fan can vent all appliance categories with or without barometric dampers Up to 6,000-10,000 MBH High temperature motor eliminates the need for secondary fan cooling Simple design with few components reduces the risk of failure and simplifies service

8 CASI Chimney Automation System

9 RSIB Power Venter Capacity: 8,000 MBH on CAT I Appliances 15,000 MBH on CAT IV Appliances SS316 construction Removable access door Direct drive Class A insulated motor - eliminates the need for secondary fan cooling Maintenance free Up to 575 ºF Duty The RSIB fan can vent category I, II, III & IV appliances Simple design with few components reduces the risk of failure and simplifies service RSIB is of Type B, Spark Resistant Construction UL 378 Draft Equipment

10 RSIF Power Venter Capacity: 1,800 MBH on CAT I Appliances Rated to 400 F non-condensing applications Forward inclined impeller. Statically and dynamically balanced. Insulated housing in galvanized steel Hinged fan housing easily opens to provide easy access to duct and impeller Direct drive, variable speed, TEFC motor located outside housing for easy access.

11 Modulating Overdraft Damper System

12 Controls EBC30 Modulating Pressure Control

13 Controls EBC30 Features 100% microprocessor based control Plug-and-Play initialization process Integrated PDS function with adjustable time delay Intermittent or continuous operation for all fans Field-adjustable PID loop Priority Operation function Bearing Cycle function Rotation Check for three-phase fans

14 Controls PDS Proven Draft Switch Differential pressure transducer Ensures proper draft before and during appliance operation Probe included Range: 0.04 to 0.60 W.C.

15 Controls VFD Variable Frequency Drive Pre-programmed from the factory 1 5 HP in 200 Volt Class input 1 7. All wiring is done externally conduits and wires are pre-installed Quick-menu for field adjustable Parameters NEMA 1 rating

16 Products Accessories SCA Steel Chimney Adapter Steel chimney adapter Used as transition between a round stack and the fan Made of 304 stainless steel

17 Products Accessories BBF Balancing Baffle Balancing baffle with flange connections For positive pressure stacks For balancing pressure drops on systems with multiple appliances

18 CASV Applications Stack Downsizing Hazen High School Renton, WA Soldier Field - Chicago, IL

19 CASV Applications - Aesthetics Getty Center Los Angeles Rigel San Francisco

20 MCAS Mechanical Combustion Air Supply Systems

21 MCAS Modulating Combustion Air Supply System

22 MCAS Components SFTA Fan Seven Models 1,500 30,000 cfm Fan can be mounted indoors Impeller cast aluminum. Housing in steel Direct drive, variable speed, TEFC motor located outside housing for easy access. Variable Frequency Drive is used on three phase models (VFD should be located inside the building).

23 MCAS Components BESF/BESB Fan Seven Models cfm Fan can be mounted indoors or outdoors. Impeller - statically and dynamically balanced. Insulated housing in galvanized steel Hinged fan housing easily opens to provide easy access to duct and impeller Direct drive, variable speed, TEFC motor located outside housing for easy access. Variable Frequency Drive is used on three phase models In-door or out-door installations (VFD should be located inside the building).

24 EBC30 Modulating Control Modulating Combustion Air Supply System Chimney Automation System

25 SBC Center San Antonio, TX Two 16 inch ducted combustion air inlets Instead of Two 10 foot high by 15 foot long Louvers

26 Lifetime Fitness Savage, MN

27 Marriott Waterfront Annapolis, MD One 24 inch ducted combustion air inlet Instead of One 90 ft.² louver

28 MDVS Mechanical Dryer Venting Systems

29 MDVS Mechanical Dryer Venting System

30 MDVS Components - BESB Fan Four Models cfm ETL Listed to UL705 :"The product (BESB/MDVS) covered by this report is a modulating air exhaust system. The product consists of a box ventilator and a modulating control for permanent installation. Its intended use is exhausting of lint-laden air from single or multiple type I and type II residential and commercial clothes dryers whether electric or gasfired, exhausting commercial hoods, or for providing make-up air for laundries or mechanical rooms. The box ventilator can be installed indoors or outdoors."

31 MEC 18 Control Monitor draft in multi-story building exhaust applications Controls RSV, EFH, BESF and BESB EBC12 functions UL 508 and CSA C22.2 Standard for Industrial Control Equipment

32 Kitchen and Dryer Exhaust Madigral Lofts, MD

33 Applications Sports Arenas Hotels Hospitals Schools Fitness Facilities Apartments / Condominiums

34 Appliance Categorization Atmospheric Fan Assisted Forced Draft Scotch Marine Draft Hood Draft Diverter I III Negative Fan Assisted (high efficiency) II IV Condensing Positive

35 Z (Venting of equipment) 12.1 Minimum Safe Performance A venting system shall be designed and constructed so as to develop a positive flow adequate to remove flue or vent gases to the outside atmosphere Equipment Draft Requirement A venting system shall satisfy the draft requirement of the equipment in accordance with the manufacturer s instructions.

36 Common Code Violations (NFPA 54) Z (Venting of Equipment) (NFPA 54) Z (Sizing of Venting Systems)

37 Common Code Violations 3" 4" 5" 6" 7" 8" 9" 10" 12" 14" 16" 7" 10" 12" 14" 18" 22" 22" 26" 30" 36" 42" (NFPA 54) Z223 Sizing Tables (NFPA 54) Z (Sizing of Venting Systems)

38 Mechanical Draft Systems Defined Z Standard for Venting of Equipment Mechanical draft systems shall be listed and shall be installed in accordance with the terms of their listing and both the appliance and the mechanical draft system manufacturer s instructions Appliances requiring venting shall be permitted to be vented by means of mechanical draft systems of either forced or induced draft design. Exception: Incinerators Where a mechanical draft system is employed, provision shall be made to prevent flow of gas to the main burners when the draft system is not performing so as to satisfy the operating requirements of the equipment for safe performance

39 Commercial Laundry Radisson, Orlando, FL

40 Responsibility Reduce Emissions Environmentally friendly Low Energy Recyclable Materials Demand-Controlled

41 And Still Going Strong... Reliable Disney Allstar Resorts Orlando, Florida 60 RSV installed 2 RSV replaced The White House Washington D.C 12 RSV installed Sample 3 xx RSV installed

42 Eliminates Potential Risks Seismological Safe

43 Eliminates Potential Risks Seismological Safe

44 Case: CBS Studio, Hollywood, CA Boiler replacement. Must meet air quality requirements and eliminate need for substantial stack work. Solution: Four condensing boilers installed in a modular system using a single common stack and a CASV system for venting. Benefits: Simple and Aesthetically pleasing Limited stack work using existing chase