nr. 4 Ø64 RECEIPT OF PRODUCT The convector is supplied in two cardboard packages: - Convector - Fume exhaust and combustion air inlet pipes.

Size: px
Start display at page:

Download "nr. 4 Ø64 RECEIPT OF PRODUCT The convector is supplied in two cardboard packages: - Convector - Fume exhaust and combustion air inlet pipes."

Transcription

1 RECEIPT OF PRODUCT The convector is supplied in two cardboard packages: - Convector - Fume exhaust and combustion air inlet pipes. Contents of convector package: Convector Digital chronothermostat Tie-rods (positioned inside the casing) Metal template Document envelope: Operator's instruction booklet Installer's instruction booklet Gas transformation kit Spare parts catalogue Warranty certificate Warranty label Power socket 4 Ø 8 mm anchors for fastening template Fume exhaust and combustion air inlet pipes: To install the CONVECTOR, the PIPE KIT is required that is most suitable to the type of combustion air inlet and fume exhaust system to be created. This must be ordered separately from the appliance and selected from among the following: CONTENTS OF PIPE KIT Ø 3 COMBINED END PIECE PACKAGE (code TP30S 00000): Tap with union Ø 3 pipes L=500 mm Combined pipe end piece Ø 3 mm 4 Ø 6 mm wall anchors for fastening end piece Guide arms 6 Ø 9 mm anchors for fastening the guide arms 8 Self-threading screws for fastening the tie-rods nr. 6 Ø 9 nr. 8 3,9 x 6,5 500 nr. 4 (Ø 6mm) Ø64

2 CONTENTS OF PIPE KIT Ø 54 COMBINED END PIECE PACKAGE (CODE TP540S 00000): Tap with union Ø 54 pipes L=500 mm Combined pipe end piece Ø 54 mm 4 Ø 6 mm wall anchors for fastening end piece Guide arms 6 Ø 9 mm anchors for fastening the guide arms 8 Self-threading screws for fastening the tie-rods Diaphragms (Mod only) 4 O-Rings for pipes nr. 6 Ø 9 nr. 8 3,9 x 6,5 500 nr. 4 O-Ring nr. 4 (Ø 6mm) Ø64 CONTENTS OF PIPE KIT Ø3 SEPARATE END PIECES PACKAGE (CODE TP3SS 00000) Tap with union 3 Curves Ø 3 mm 3 Pipes Ø 3 L=500 mm Pipes Ø 3 L=000 mm Pipe end pieces Ø 3 mm 4 Self-threading screws for fastening end pieces Flanges in stainless steel 8 Ø 6 mm anchors for fastening flanges Guide arms 6 Ø 9 mm anchors for fastening guide arms 8 Tie-rod retention screws nr. 6 Ø 9 nr. 3,9 x 6,5 000 mm 500 mm nr. 8 (Ø 6mm) 500 mm

3 CONTENTS OF PIPE KIT Ø 54 SEPARATE END PIECES PACKAGE (CODE TP54SS 00000) Tap with union Ø 54 mm die-cast curves Curve Ø 54 mm 3 Pipes Ø 54 L=500 mm Pipes Ø 54 L=000 mm Pipe end pieces Ø 54 mm Plastic rosettes Guide arms 6 Ø 9 mm anchors for fastening guide arms 8 Tie-rod retention screws Diaphragms (Mod only) 8 O-Rings for pipes nr. 6 Ø 9 nr. 8 3,9 x 6,5 nr. 8 O-Ring 500 mm 000 mm These solutions have been designed for air inlet and/or exhaust away from the appliance, with separate pipes. 500 mm THE USER MUST LOOK AFTER THE OPERATING AND MAINTENANCE INSTRUCTIONS. Checking the Pipe kit To install the Convectors, the PIPE KIT is required most suitable to the type of combustion air inlet and fume exhaust system to be created. This must be ordered separately from the appliance and selected from among the following: MODELLO descrizione KIT std. EXHAUST/INLET Ø 3mm ( COMBINED end piece) KIT std. EXHAUST/INLET Ø 54mm ( COMBINED end piece) KIT special EXHAUST/INLET Ø 3mm ( SEPARATE end pieces) KIT special EXHAUST/INLET Ø 54 mm ( SEPARATE end pieces) KIT special EXHAUST/INLET Ø 3mm ( COMBINED) Fitting from INSIDE KIT special EXHAUST/INLET Ø 54mm ( COMBINED) Fitting from INSIDE CODICE TP30S TP540S TP3SS TP54SS TP306A5 00 TP540A5 00 3

4 DIMENSIONS AND WEIGHTS Height (a) Depth (b) Width (c) Weight u.m. mm mm mm kg ,5 9 35,5 43 b a c INSTALLATION AREA This is a sealed and environment-friendly appliance. Combustion air is extracted only from outside - DO NOT use accessories or components for positioning that are not approved by the Manufacturer as this could cause a serious hazard. - DO NOT place the power cable on hot surfaces such as the air diffusion grilles or fume extraction pipes After installation, the fitter must inform the user what to do when the appliance is running: DO NOT place curtains, towels and similar on the appliance as this could cause malfunctions and prevent proper room ventilation. - DO NOT obstruct the appliance inlet/outlet with hung-up washing or carpets. 4

5 INSTALLATION AND MASONRY WORKS Before completing any masonry works, make sure there is enough room for the appliance to operate and for it to be serviced. To proceed correctly, it is important to make sure the wall or ceiling to which the appliance is to be secured is suitable for supporting the weight of the appliance; in this respect, check the anchors provided to make sure they are able to sustain the appliance taking into account the material of which the wall or ceiling is made. If they are not, replace them with other more suitable ones. Make sure there is no matchboarding or plastic inserts which are not heat resistant and which could come into contact with the fume extraction pipes. Min 500 Min 50 Min 50 0,5 Min In case of a wall made of material with low resistance to heat, an interspace can be made around the fume exhaust pipe that is insulated with material resistant to high temperatures or else a hole can be made with a diameter that is at least 4 cm bigger than that of the fume exhaust pipe. 9 mm Ø 65 Ø 0 Installing the appliance in bathrooms/showers or near water dispensing units is forbidden. In such cases special protections must be made that ensure the appliance conforms with "specific" Electrical Safety Standards. Min 50 Note*: to prevent directing the air flow to people height, the appliance should be fitted at a MIN height of.30 m and a MAX height of 3.00 m to prevent any air stratification. 5

6 TYPES OF INSTALLATION ACCORDING TO UNI CIG 79 The types of pipe installation are shown below (inlet and exhaust) according to the indications of the applicable UNI CIG 79 standard, for product having the following construction and installation characteristics. TYPES OF INSTALLATION ACCORDING TO UNI CIG 79 WITH NEARBY AIR INLET AND FUME OUTLET ON THE SAME WALL. WITH NEARBY VERTICAL AIR INLET AND FUME EXHAUST, POSITIONED ON ROOF. C 3 C 33 WITH AIR INLET AND FUME EXHAUST FAR AWAY FROM EACH OTHER. WITH AIR INLET AND FUME EXHAUST FAR FROM EACH OTHER. INLET THROUGH STACK AND EXHAUST PIPES PASSING THROUGH SAME STACK. C 53 C 63 MENSOLA 6

7 CEILING INSTALLATION WITH PARALLEL PIPES AND COMBINED END PIECE Installation "against the wall" (crossed by inlet and exhaust pipes) Before installing, make sure the diameters, the total lengths and the end pieces of the pipes and their overall flow resistances do not exceed the prescribed limits as indicated in the chapter on Pipe lengths and Pressure loss. Fitting the guide arms and template: Choose where to position the convector on the ceiling, fit the guide arms, according to the following procedure: - using the 4 screws provided, fasten the tie-rods (3), aligning the guide arms (); - mark the 6 holes for fastening the guide arms (). Drill the holes using a Ø 9 mm bit if the provided anchors are used. This diameter will be different if other anchors, considered more suitable, are used. Always remember that the working width of the slot is Ø 9 mm; - fasten the guide arms + tie rod structure (+3) to the ceiling so the two arms fasten onto the wall (important: the tie-rods must be fitted in both the ceiling solution and the bracket solution); - Move the metal template (5) close to the arm () (the right one), marking the centre of the inlet and exhaust pipe outlet holes and the template fastening holes. Alongside hole B, make the centring hole using an Ø 8 mm bit, fasten the template (5), using Ø 8 mm anchors positioned at holes B and D. Once centring has been made, disconnect the half-cut disc from the hole on the template (5). Make a hole using a suitable milling unit or by making a series of small holes in the circumference. IMPORTANT! Detach only the central Ø 65 mm disc for pipes diameter Ø 3 mm and ring Ø 0 mm for pipes diameter Ø 54 mm. Proceed to drill the wall taking into account the details shown on the Table. B 5 D 3 Ø 3 Ø 54 TUBAZIONI u.m Ø wall hole for parallel pipes mm 65/0 65/0 0 0 Ø air inlet/exhaust pipes mm 3/54 3/ Length of parallel pipes for COMBINED end piece m 5/5 /5 5 0 Overall length of pipes m 0,08 7

8 Installation "away" from the wall (crossed by air inlet and fume exhaust pipes) Installation is practically the same as that "against the wall". The only difference is that the template (5) has to be positioned without the reference of the guide arm (). It is best therefore to install the guide arms, position the convector and then fit the template on the wall. Fit the pipes according to lengths and layout and join these to the union on the convector and template. Adapting the outlet union to the pipe diameter Questa operazione si rende necessaria solo sui Termoconvettori 40-60, qualora si passi, dove è consentito, dalle tubazioni Ø 3 mm a quelle Ø 54 mm e viceversa. The appliance is always supplied by the Manufacturer ready to use the Ø 3 mm pipes. This operation must be performed before fitting the convector on the guide arms. Proceed as follows: - loosen the screws () of the outlet union (); - remove the inlet/exhaust pipes; - fit the diaphragms (3)(for Ø 3 mm); - fit the pipes back on (be careful to correctly fit the two "round-offs"). - fit the outlet union back on (). Assembly must be made as shown in the illustration. Ø 3 Ø 54 3 Fitting parallel "air inlet/fume exhaust" pipes This solution has been conceived to make air inlet/exhaust directly behind the appliance or away from the appliance using parallel pipes; for max diameters and lengths, see the above Table. Adapt the length of the pipes provided to the actual thickness of the wall Thick. + X mm, cutting off any excess part. Complete the missing section with the pipes necessary for "away" installation, remembering to fasten and insulate these when necessary. Min 50 L = Sp + x x Ø 65 Ø 0 Sp 8

9 The pipes must always be cut perpendicular to the axis of the pipe itself, being very careful not to deform the pipes; after cutting, carefully remove any remaining burrs. Ø 65 Ø 3 mm Ø 0 Ø 0 Ø 54 mm Ø 60 a a a b b On the pipes featuring seals, the O-rings must not protrude from their seats. For easier fitting, use silicone or soapy grease. Select the type of combined end-piece fitting: if fitted from inside together with the pipes (a, b, small flange) or that fitted from the outside (a, b, large flange). Fitting pipes with combined end piece fastened from inside Fit the combined end piece () on the pipes after cutting them in the required lengths and fastening them using the screws provided (). Make sure the fume exhaust hole of the end piece (a) is positioned high up. Ø 65 Ø If not already done, detach the half-cut disc from the hole on the template and then fit the pipe assembly in the wall, positioning it so the small flange of the combined end piece is flush with the outer wall. Secure the pipes with mortar so they cannot turn, being careful not to dirty them inside. To cover the drilling imperfections on the wall, if the outer end piece is easy to reach, we suggest using a plastic rosette (3) (4) which can be fastened with silicone or other adhesives for plastic materials. 9

10 Fitting parallel pipes with combined end piece fastened from outside Fit the pipe assembly without end piece in the wall, positioning it so the pipes are flush with the outer wall and perfectly vertical. Fit the outer end piece on the pipes, making sure the fume exhaust hole (a, fig. on previous page) of the end piece is positioned high up; now proceed to fasten the combined end piece () using the four Ø 6 mm anchors provided (). Make sure the end-piece pipes fit on correctly to ensure the seal of the O-rings on the pipes featuring seals. Min 50 Ø 65 Ø 0 a "BRACKET" INSTALLATION WITH PARALLEL PIPES AND COMBINED END PIECE Before making any installation, carefully read the Table on page 8 to make sure the diameters, the total lengths and the end pieces of the pipes and their overall flow resistances do not exceed those prescribed! When the convector cannot be fitted directly on the ceiling, two brackets are available to be assembled together with the guide arms + arm tie-rods, to make a supporting bracket. For correct bracket installation, proceed as follows: - check the consistency of the installation wall and position the metal template (5); - rest bracket (4) at the required height against the wall and level with a spirit level; - mark the three retention holes for bracket (4); - drill with a Ø 9 mm drill if the provided anchors are used; use a different diameter if other anchors, thought to be more appropriate, are used, remembering that the working width of the slot is Ø 9 mm; - fasten the bracket (4) to the 4 3 wall; B - assemble the guide arm (); Move the metal template (5) close to the bracket (4), marking the centre of the 5 outlet hole of the inlet and exhaust pipes and those for fastening the template. 0

11 - At hole B, make the centre hole using a Ø 8 mm drill and then fasten the template using the Ø 8 mm anchors provided. After centring, detach the half-cut disc from the hole on the template. B A Detach only the central Ø 65 mm disc for pipes diameter Ø 3 mm and ring Ø 0 mm for pipes diameter Ø 54 mm. - Drill the hole taking into account the details shown on the Table on page 8, using a suitable cutter or a succession of small holes made in the circumference. - assemble the arm tie-rods (3, fig. on previous page) with the guide arms (). - assemble the right bracket with the right guide arm. - position the two guide arms + tie-rods against the wall, assembling the left bracket with its guide arm. - mark the three retention holes for the second bracket with the aid of a spirit level to obtain a perfectly horizontal fitting. - drill with a Ø 9 mm drill if the provided anchors are used; use a different diameter if other anchors, thought to be more appropriate, are used, remembering that the working width of the slot is Ø 9 mm; - fit the second bracket to the wall. To install the inlet and exhaust pipes, proceed as in the case of the appliance installed on the ceiling. E F C D Ø 3 Ø a B 5 D 3

12 FITTING THE CONVECTOR Make sure all the previous operations have been performed properly, after which proceed to fit the convector on the ceiling: 3 Do not use the convection fan as a grip to raise the CONVECTOR to avoid any malfunctions or noise problems. This job is best done by two people to prevent any risk of the appliance falling and/or accidents! - Lift the appliance and rest the rear part of the frame on the initial part of the guide arms (). - Fit in succession the rear fasteners () and front fasteners (3) of the frame in the guide arms until the two exhaust (4) and inlet (5) pipes of the convector are fitted onto the respective adapter connector pipes. - Move the front section of the frame adjacent to the mouth of the guide arms. Secure the appliance with the screws provided. 4 5 After completing installation, carefully check both the ceiling and wall fastenings. Rimontare infine il mantello. Finally, fit the casing back again. To fit the casing back, pipe fitting will first of all have to be completed! To correctly remove and fit the casing back on, proceed as indicated in the CASING REMOVAL AND FITTING chapter.

13 INSTALLATION WITH SEPARATE PIPES AND SEPARATE END PIECES To install the convector on the ceiling or wall with bracket, follow the instructions in the relevant section. The instructions are given below for the pipes only. Before installing, carefully read the Pipe Length Check and Pressure Loss chapter to make sure the diameters, total lengths and end pieces of the pipes and their overall flow resistances do not exceed prescribed settings! Positioning the pipes (general rules) After choosing where to position the convector on the ceiling (b) or wall (a), depending on the type of pipe fitting, mark the points where the holes and/or breaks have to be made in the wall. Make the centring holes with a Ø 8 mm drill, and then with a cutter suitable for the diameter of the pipes used. Whenever necessary, make the traps for housing the pipes, taking into account the thickness of the insulation to be used. b a Mind that the pipes do not interfere with the fastenings of the convector and/or of the brackets! Mind that the recessed pipes do not alter wall resistance and affect safety! When fitted outside, support the pipes on the wall or ceiling by securing with standard clamps. For each of the following CASES, further operations will be indicated for correct installation. A) Fitting the pipes recessed in the wall, making chases and holes in the wall to house the pipes (Figures a and b page 4). This solution can be adopted when the wall thickness is such that stability is not affected by making the chases and holes for the pipes. In any case, the wall will have to be subsequently reinforced. This solution is not recommended if the walls are less than 5 cm thick. 3

14 a b B) Fitting the pipes beyond the wall. This solution can be adopted in case the pipes are to be kept outside the room to be heated. c The exhaust pipes must be insulated () using materials resistant to temperatures of over 00 C (eg. HT/Armaflex), so that the fumes cannot condense and the surface temperature, if the pipes run outside, does not represent a hazard for persons or things in the immediate vicinity or in close contact. 4

15 A: Installation with pipes recessed in the wall. Before fitting the guide arms and the brackets, the masonry works will have to be performed to house the pipes in the wall. A. - Installing the pipes (Fig. on previous page). In this case, where the inlet pipe is perpendicular to the wall and the fume exhaust pipe is parallel with the wall (turned upwards), mark the centre of the hole through which the pipe passes for Ø3 pipe (F) or Ø 54 pipe (E) as previously indicated. Afterwards, before making the vertical chase, make the holes for the inlet and exhaust pipes to pass through the wall. These should have the dimensions indicated on the Table on page 8. A. - Installing the pipes (Fig. b on previous page). In this case, where the inlet and exhaust pipes are recessed in the wall and can have directions of installation different from the example shown, before F making the chases in the wall, the holes will have to be made for the inlet and exhaust pipes to pass through as shown at para. A.. These should have the dimensions indicated on the Table on page 8. b E D C B A a B: Installation with pipes beyond the wall. B. - Installing the pipes (Fig. c on previous page). In this case, the inlet and exhaust pipes pass through the wall with the two pipes parallel and then continue in the required direction; for installation, refer to the relevant section for fitting the arms and air inlet/fume exhaust pipes. Fit the pipes, cut to size and secure with the screws provided. Secure the pipes to the wall using standard clamps. B. - Fitting the convector To fit the convector, refer to the relevant chapter. 5

16 FITTING THE STACK The stack should be fitted in accordance with the following requirements: - the exhaust section of the stack should be outside the reflow area to prevent the formation of counter-pressures that could impede combustion product exhaust into the atmosphere; - the stack should be positioned so rain and snow cannot penetrate inside. To install, refer to applicable installation regulations UNI CIG 79 - UNI CIG 73. The illustration shows how to fasten the stack to the exhaust pipe using clamp () and safety screw (). CHECKING the length and loss of pressure in the pipe To make sure installation is such as to ensure good appliance operation, always check pipe length, total length and number of curves and relevant flow resistance. These should not exceed the maximum values prescribed for the various models. For maximum allowed lengths and flow resistances, see Table 4: Maximum acceptable pipe length and flow resistance values. Tab. 3: Pipe check for performing the operation correctly: in column N. enter the number of pieces making up the pipe in relation to the type. This quantity must be multiplied by length L. (in m) and shown in column N. x L.. In column Pa* enter the Flow Resistance values taken from Tab. 4 depending on the convector model and diameter of the pipe to be installed; multiply this quantity in N. of pipe elements by the relevant flow resistance value and write the result in the column N. x Pa. Add the values found and compare them with the reference values shown on Tab. 4. By maximum allowed length is meant the sum of the total length of the air inlet pipe and the total length of the fume exhaust pipe. By maximum acceptable pressure loss is meant the sum of all the losses caused by the straight pipes, the curves and the end pieces, in inlet and exhaust. 6

17 Tab. 3: Checking the pipes. Pipes N. L. N. x L. Pa(*) N. x Pa Pipe Ø 3/500 Pipe Ø 3/000 0,5 3 Pipe Ø 54/500 0,5 Pipe Ø 54/000 Curve Ø 3 0,70 4 Curve Ø 54 0,5 5 COMBINED pipe end piece 0, 6 SEPARATE pipe end piece 0,06 Total Total (*) Values to be obtained from Tab. 4 according to the type of radiator and pipes installed: max acceptable values for pipe lengths and flow resistances. Tab. 4: MAX acceptable values for pipe lengths and flow resistance. Pipes u.m mm Max acceptable Pressure loss p Pa Max length of SEPARATE end pieces m Max length of COMBINED end piece m Pipe L= 500 mm Pa 3 0,5 6 0,6,,5 Pipe L= 000 mm Pa 5,5 0,8 3,5 Curve 90 Pa,5 0,5 4,5 COMBINED pipe end piece Pa 3 3 SEPARATE pipe end piece Pa 0,5 0,6 7

18 POWER CONNECTIONS The POSTER PS CONVECTORS are fully wired in the factory and complete with plug for connection to the power mains. All that is required is a power cable type HAR H05 RRF with mm minimum cross section of wires. On one end, this must feature the plug supplied with the appliance and on the other the plug for the socket or line master switch. A proper earth connection is mandatory. The manufacturer of the appliance cannot be held liable for any damage caused by lack of proper earth connection. For jobs of an electrical nature, always refer to the diagram attached to this booklet. Never use gas and/or water pipes to earth the appliance. 8

19 GAS SUPPLY CONNECTION Make sure the CONVECTOR is set for the type of gas to be used by checking the Technical Plate on the cover casing of the exchanger. Connect the CONVECTOR to the gas supply line using the union and tap provided with the appliance and with a rigid pipe and connectors in conformity with applicable regulations. The connector fitted to the appliance is 3/8 according to UNI ISO 7/ standard. When the gas supply is to the right of the appliance, to prevent interference with the casing, add a nipple. After completing the gas connection, perform seal tests according to the provisions of applicable installation regulations. 9

Installation Manual PS-200 & PS-201

Installation Manual PS-200 & PS-201 Installation Manual PS-200 & PS-201 Table of Contents Pre-Uncrating Checklist... 1 Verifying System Requirements... 2 Verifying System Direction... 2 Verifying the Electrical Requirements... 2 Removal

More information

Installation Manual PS-225 & PS-275

Installation Manual PS-225 & PS-275 Installation Manual PS-225 & PS-275 Table of Contents Pre-Uncrating Checklist... 1 Verifying System Requirements... 2 Verifying System Direction... 2 Verifying the Electrical Requirements... 2 Removal

More information

CANOPY RANGEHOOD OFFBOARD INSTALLATION INSTRUCTIONS

CANOPY RANGEHOOD OFFBOARD INSTALLATION INSTRUCTIONS Congratulations on your purchase! Thank you for choosing a Sirius product. CANOPY RANGEHOOD OFFBOARD INSTALLATION INSTRUCTIONS SLTC EM 107 G900 EAN# 9351116001766 SLEM 107 S900 EAN# 9351116001759 SLEM

More information

Merloni Elettrodomestici. Technical Fitting Manual OVENS. Language Issue/Edition Page GB /

Merloni Elettrodomestici. Technical Fitting Manual OVENS. Language Issue/Edition Page GB / GB 99-11-03/01 1-18 Index 1 WORKING AND FITTED DIMENSIONS 3 1.1 Oven size 60 cm 3 1.2 Maxioven 4 2 INSTALLING THE FITTED OVEN 5 3 FITTED GAS - INSTALLATION REQUIREMENTS 5 4 FIXING THE OVEN TO THE UNIT

More information

CANOPY RANGEHOOD ONBOARD INSTALLATION INSTRUCTIONS

CANOPY RANGEHOOD ONBOARD INSTALLATION INSTRUCTIONS Congratulations on your purchase! Thank you for choosing a Sirius product. CANOPY RANGEHOOD ONBOARD INSTALLATION INSTRUCTIONS SLTC 97 900 EAN# 9351116001612 SL22 900 EAN# 9351116000660 SL7 1200 EAN# 9351116000813

More information

Air Heater. Air Top 3500 Diesel. Supplemental Installation Instructions for: Van Body Vehicles

Air Heater. Air Top 3500 Diesel. Supplemental Installation Instructions for: Van Body Vehicles Air Heater Air Top 3500 Diesel Supplemental Installation Instructions for: Van Body Vehicles Table of Contents 1. Introduction 1.1 General Information.............................................. 2 2.

More information

SERVICE MANUAL DISHWASHERS DIVA ACCESSIBILITY DISHWASHERS

SERVICE MANUAL DISHWASHERS DIVA ACCESSIBILITY DISHWASHERS SERVICE MANUAL DISHWASHERS DIVA ELECTROLUX HOME PRODUCTS S.p.A. Publication no. Spares Operations Italy Corso Lino Zanussi,30 I - 33080 PORCIA /PN (ITALY) 599 38 70-09 Fax +39 0434 394096 EN DISHWASHERS

More information

Condair Esco. Steam humidification system INSTALLATION INSTRUCTIONS EN 1310

Condair Esco. Steam humidification system INSTALLATION INSTRUCTIONS EN 1310 Condair Esco Steam humidification system L INSTALLATION INSTRUCTIONS 1117775 EN 1310 3 Contents 1 Introduction 4 1.1 General 4 1.2 Safety 4 2 Esco DL40 5 2.1 Overview Esco DL40 5 2.2 Mounting the Esco

More information

Merloni Elettrodomestici. Technical Fitting Manual DISHWASHER. Language Issue/Edition Page GB /

Merloni Elettrodomestici. Technical Fitting Manual DISHWASHER. Language Issue/Edition Page GB / GB 99-11-02/01 1-26 Index 1 CONFORMITY OF APPLIANCE 3 2 DIMENSIONS OF AND HOUSING SPACE 3 2.1 Standard equipment - Fitting tools 4 3 FITTING THE FRONT PANEL 5 3.1 Technical information for installation

More information

Gas Room Heater. Stratos Brahma

Gas Room Heater. Stratos Brahma Gas Room Heater Stratos Brahma COMPLIANCE Our appliance shall be installed in accordance with AS/NZS 560., and local authority requirements. This appliance must only be installed by an authorised person.

More information

IMPORTANT SAFETY INSTRUCTIONS DANGER: WARNING:

IMPORTANT SAFETY INSTRUCTIONS DANGER: WARNING: IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the attention

More information

METIS. Installation instructions. Riser rail kit INSTALLERS PLEASE NOTE THESE INSTRUCTIONS ARE TO BE LEFT WITH THE USER.

METIS. Installation instructions. Riser rail kit INSTALLERS PLEASE NOTE THESE INSTRUCTIONS ARE TO BE LEFT WITH THE USER. METIS Riser rail kit Installation instructions INSTALLERS PLEASE NOTE THESE INSTRUCTIONS ARE TO BE LEFT WITH THE USER 2180531A September 2006 CONTENTS Page General installation notes 1 Main components

More information

C D INSTALLATION 16 INSTALLER GENERAL INFORMATION

C D INSTALLATION 16 INSTALLER GENERAL INFORMATION INSTALLATION GENERAL INFORMATION This appliance is sealed from the surrounding environment in which it is installed and consequently combustion air is only aspired from outside! - When installing, NEVER

More information

Model: M630-44FDC CAUTION:

Model: M630-44FDC CAUTION: Electric FIREPLACE Heater Model: M630-44FDC IMPORTANT: Please note: when you open the carton, carefully check the unit and make sure there is no damage. If you have any problems with the unit, with how

More information

C-IV 60 CEILING FAN READ AND SAVE THESE INSTRUCTIONS. FAN RATING AC 120V. 60Hz

C-IV 60 CEILING FAN READ AND SAVE THESE INSTRUCTIONS. FAN RATING AC 120V. 60Hz C-IV 60 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz Please do not use any electric or battery powered tools in the assembly and installation of this or any Matthews Fan Company

More information

JLBIHD624 60cm Cooker Hood

JLBIHD624 60cm Cooker Hood JLBIHD624 60cm Cooker Hood User guide 2 Cooker hood user guide Contents Contents 3 Introduction 4 Safety is important 4 In the box 4 Safety information 5 Important safety information 5 Warnings 5 Cautions

More information

Contents. 1. Instructions for safety and use 20

Contents. 1. Instructions for safety and use 20 Contents 1. Instructions for safety and use 20 2. Positioning in the counter top 21 2.1 Fixing to the supporting structure 21 2.2 Positioning the adhesive sponge 22 2.3 Positioning the fastening clips

More information

GB125 Concentric Vent

GB125 Concentric Vent GB125 Concentric Vent For Buderus models: - GB125BE-22/30/35 GB125 Concentric Vent 2 GB125 Concentric Vent 05.2009 Applications manual Table of Contents GB125 Concentric Vent 1 General information 5 1.1

More information

BT16.4SS-HK BT19.4SS-HK Cooker Hood

BT16.4SS-HK BT19.4SS-HK Cooker Hood BT16.4SS-HK BT19.4SS-HK Cooker Hood User Manual for your Baumatic User Manual for your Baumatic BT16.4SS-HK 60 cm Chimney Hood BT19.4SS-HK 90 cm Chimney Hood NOTE: This User Instruction Manual contains

More information

SPRINGHILL 44 CEILING FAN

SPRINGHILL 44 CEILING FAN SPRINGHILL 44 CEILING FAN MODELS #50184, 50185 Español p. 20 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-361-3883, Monday - Thursday,

More information

Instructions for Use and Warranty Details. RH17-900mm Island Canopy Rangehood

Instructions for Use and Warranty Details. RH17-900mm Island Canopy Rangehood Cooking c o l l e c t i o n Instructions for Use and Warranty Details RH17-900mm Island Canopy Rangehood C ongratulations on the purchase of your new appliance. This appliance has been designed and manufactured

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL CEILING FAN OWNER'S MANUAL READ AND SAVE THESE INSTRUCTIONS MODEL: 52-135-5WA-13 FAN RATING AC 120V. 60Hz CUL LISTED MODEL : AC-552OD 1. TOOLS AND MATERIALS REQUIRED Philips screw driver Blade screw driver

More information

Installation Instructions

Installation Instructions Installation Instructions Downdraft Vent Systems PVB94 PVB98 ZVB30 ZVB36 31-10728-8 11-14 GE 1 Safety Information If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com BEFORE

More information

Heat Pump / Air Conditioner

Heat Pump / Air Conditioner Heat Pump / Air Conditioner With supplemental heat 208v/230v INSTALLATION AND USER BEFORE INSTALLING AND USING THIS AIR CONDITIONER PLEASE READ ALL INSTRUCTIONS CAREFULLY. MANUAL Version 20110711.BL 1.1

More information

COOKER HOOD USER HANDBOOK FOR INSTALLATION AND OPERATION MODELS CRC95

COOKER HOOD USER HANDBOOK FOR INSTALLATION AND OPERATION MODELS CRC95 COOKER HOOD USER HANDBOOK FOR INSTALLATION AND OPERATION MODELS CRC95 Your new Cooker Hood Using your new Cooker Hood is very simple. Nevertheless, to get the best results it is important that you read

More information

BWT6.3GL Cooker Hood 60 cm Glass chimney hood

BWT6.3GL Cooker Hood 60 cm Glass chimney hood User Manual for your BWT6.3GL Cooker Hood 60 cm Glass chimney hood NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get

More information

CEILING FAN OWNER S MANUAL

CEILING FAN OWNER S MANUAL Style that revolves around you. CEILING FAN OWNER S MANUAL Total fan weight *53 lbs. WEXFORD 11/05 WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout.

More information

ELEGANCE IPX4 IPX7. Low Carbon Fan with EC Motor Installation and Operating Instructions. 6 models:

ELEGANCE IPX4 IPX7. Low Carbon Fan with EC Motor Installation and Operating Instructions. 6 models: ELEGANCE Low Carbon Fan with EC Motor Installation and Operating Instructions 6 models: - SAP Appendix Q Eligible 3 speed continuous running - timer - humidity control - SELV - low voltage for all domestic

More information

For our present, For their future. Version 11.04

For our present, For their future. Version 11.04 For our present, For their future. SFH-S1 Series Solar Water Heater Assembly Manual Content http://www.sunflower-solar.com/ 1. FEATURES...3 2. SOLAR WATER HEATER SIZE AND WEIGHT...4 3. HOW TO TRANSPORT

More information

TH450A-CRB TH550A-CRB THP550-CRB/TS3000

TH450A-CRB TH550A-CRB THP550-CRB/TS3000 TH450A-CRB TH550A-CRB THP550-CRB/TS3000 INSTRUCTION MANUAL CLEAN TYPE INDUSTRIAL ROBOT SPECIFICATIONS Notice Make sure that this instruction manual is delivered to the final user of Toshiba Machine s industrial

More information

ValkyrieTM. Instruction Manual. Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you go! U.S.

ValkyrieTM. Instruction Manual. Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you go! U.S. ValkyrieTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you

More information

SERIES CATALOGUE C & G. Shavings Collection System

SERIES CATALOGUE C & G. Shavings Collection System SERIES CATALOGUE C & G Shavings Collection System Safety Precautions WARNINGS Wear working clothes suitable for the operation. In particular, eye protection equipment must be worn to prevent shavings from

More information

M650-38A-OAK ELECTRIC FIREPLACE HEATER NDF-65NB-1 INSTRUCTION MANUAL

M650-38A-OAK ELECTRIC FIREPLACE HEATER NDF-65NB-1 INSTRUCTION MANUAL ELECTRIC FIREPLACE HEATER INSTRUCTION MANUAL M650-38A-OAK NDF-65NB-1 ATTENTION: 1. Find a location for the fireplace heater that is protected from direct sunlight. 2. Do not plug the unit into the power

More information

Orrin. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S.

Orrin. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Patent Pending Orrin A Kichler Select ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010

More information

Refrigerator BRFB1920SS BRFB1900FBI BRFB1920FBI

Refrigerator BRFB1920SS BRFB1900FBI BRFB1920FBI Refrigerator BRFB1920SS BRFB1900FBI BRFB1920FBI Table of Contents Symbols and Their Meanings... 3 Product weight... 5 Load bearing capacity of the doors... 5 Climate class... 5 Product Information:...

More information

INSTALLATION AND OPERATING INSTRUCTIONS GN2. HIGH EFFICIENCY CAST IRON BOILER FOR LIQUID and/or GAS FUELS

INSTALLATION AND OPERATING INSTRUCTIONS GN2. HIGH EFFICIENCY CAST IRON BOILER FOR LIQUID and/or GAS FUELS INSTALLATION AND OPERATING INSTRUCTIONS HIGH EFFICIENCY CAST IRON BOILER FOR LIQUID and/or GAS FUELS INDEX 1. Technical information... page 3 2. Dimensional and technical characteristics... page 3 3. Packing

More information

Speaker Wall Mount (MSP-DCCSPM)

Speaker Wall Mount (MSP-DCCSPM) INSTALLATION INSTRUCTIONS Speaker Wall Mount () The speaker wall mount is a convenient mounting solution for speakers that are compatible with flat panel displays. The speaker wall bracket is equipped

More information

DUVAL 52 CEILING FAN MODELS #50201, Español p. 19 LISTED FOR DAMP LOCATION

DUVAL 52 CEILING FAN MODELS #50201, Español p. 19 LISTED FOR DAMP LOCATION DUVAL 52 CEILING FAN MODELS #50201, 50206 Español p. 19 LISTED FOR DAMP LOCATION Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-361-3883,

More information

52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V.

52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. Irene 52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz TABLE OF CONTENTS Tools and Materials Required... 1 Package Contents... 1 Safety Rules... 2 Mounting Options... 3 Hanging

More information

FitchTM. Instruction Manual. Includes our Basic Function CoolTouch TM Control System Looks permanent, but goes wherever you go!

FitchTM. Instruction Manual. Includes our Basic Function CoolTouch TM Control System Looks permanent, but goes wherever you go! Includes our Basic Function CoolTouch TM Control System Looks permanent, but goes wherever you go! FitchTM A Kichler Décor ceiling fan U.S. Patent Pending Kichler Lighting 7711 East Pleasant Valley Road

More information

Cooker Hood User Manual

Cooker Hood User Manual Cooker Hood User Manual HCB93042X EN 01M-8850803200-0116-02 Please read this manual first! Dear Customers! Thank you for preferring a Beko product. We hope that you get the best results from your product

More information

Installation Instructions. For the 18 Built-In Dishwasher and Front Color Panels

Installation Instructions. For the 18 Built-In Dishwasher and Front Color Panels Installation Instructions For the 18 Built-In Dishwasher and Front Color Panels Printed in USA 154232102 Before You Begin DO NOT INSTALL DISHWASHER UNTIL YOU HAVE READ ALL INSTRUCTIONS. FOR YOUR SAFETY,

More information

Installation Instructions

Installation Instructions Issue 1.2 August 2015 Balanced Flue Kit for NVx and VPC Industrial & Commercial Heating Systems. Installation Instructions H E A T I N G / / V E N T I L A T I O N / / A I R C O N D I T I O N I N G Page

More information

CircoloTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection.

CircoloTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. CircoloTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Patent

More information

LaceyTM. Instruction Manual. Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you go! U.S.

LaceyTM. Instruction Manual. Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you go! U.S. LaceyTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you go!

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL Distinctive Lighting and Ceiling Fans CEILING FAN OWNER'S MANUAL MODEL: 52CW2L5-GM 52CW2L5-OBB READ AND SAVE THESE INSTRUCTIONS FOR CEILING FAN PARTS AND SERVICE, CALL 1-877-902-5588 FAN RATING AC 120V.

More information

INSTALLATION GUIDE ISODRIVE MOTOR. ST - 900m 3 /hr.

INSTALLATION GUIDE ISODRIVE MOTOR. ST - 900m 3 /hr. INSTALLATION GUIDE ISODRIVE MOTOR ST - 900m 3 /hr www.schweigen.co.nz Welcome Thank you for purchasing your new Schweigen Isodrive system. To get the maximum output from this unit, please read through

More information

PC 640 GB. Built-in cooking tables 60 Instructions for installation and use

PC 640 GB. Built-in cooking tables 60 Instructions for installation and use PC 640 GB Built-in cooking tables 60 Instructions for installation and use Congratualtions on choosing an Ariston appliance, which you will find is dependable and easy to use. We recommend that you read

More information

Instruction Manual JLHDA cm Cooker hood

Instruction Manual JLHDA cm Cooker hood Contents 3 Introduction 3 Safety is important 3 In the box 4 Safety information 4 Important safety information 4 Warnings 5 Cautions 5 Electrical information 6 Remote control 6 Programming the remote control

More information

Instructions for use

Instructions for use Instructions for use These instructions are also available on the website: www.kitchenaid.eu Important instructions for safety 4 Installation 6 Safeguarding the environment 6 Troubleshooting guide 7 After-sales

More information

Instructions for Operation and Maintenance of Containers

Instructions for Operation and Maintenance of Containers Instructions for Operation and Maintenance of Containers Container Handling 1. Containers are designed for transport on a flat loading area that is 2.5 m wide, which enables support of the load-bearing

More information

ELSTON 52 CEILING FAN

ELSTON 52 CEILING FAN ELSTON 52 CEILING FAN MODEL #10290 Español p. 21 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-361-3883, Monday - Thursday, 8 am -

More information

USSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS

USSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS and Retrofit of G2E Quick Release Cushion Upholstery 1 OF 32 A 1.0 PURPOSE: To replace both Back and Cushion Upholstery on the G2E seats. 2.0 Tools Required: 2.1 1/2 Socket and Wrench 2.2 5/8 Socket 2.3

More information

Cooker Hood Instruction Manual

Cooker Hood Instruction Manual Cooker Hood Instruction Manual Model number(s): RHGCH702B IMPORTANT: RETAIN FOR FUTURE REFERENCE Contents Safety Instructions. 3-6 Product Overview. 7 Positioning. 8 Operating modes. 9 Installation. 10-15

More information

KimberleyTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection.

KimberleyTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. KimberleyTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Patent

More information

BWTC6510GL Cooker Hood 60 cm Glass cooker hood in stainless steel. BWTC9510GL Cooker Hood 90 cm Glass cooker hood in stainless steel

BWTC6510GL Cooker Hood 60 cm Glass cooker hood in stainless steel. BWTC9510GL Cooker Hood 90 cm Glass cooker hood in stainless steel User Manual for your BWTC6510GL Cooker Hood 60 cm Glass cooker hood in stainless steel BWTC9510GL Cooker Hood 90 cm Glass cooker hood in stainless steel NOTE: This User Instruction Manual contains important

More information

Table of Contents What to Expect with Your Installation. Ceiling Plate. Tools Needed.

Table of Contents What to Expect with Your Installation. Ceiling Plate. Tools Needed. Table of Contents Congratulations on purchasing your new Casablanca ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains

More information

JOHN DEERE GATOR HPX/XUV 2 PASSENGER HEATER INSTALLATION INSTRUCTIONS (p/n: 9PH20S30)

JOHN DEERE GATOR HPX/XUV 2 PASSENGER HEATER INSTALLATION INSTRUCTIONS (p/n: 9PH20S30) P. 1 of 12 JOHN DEERE GATOR HPX/XUV 2 PASSENGER HEATER INSTALLATION INSTRUCTIONS (p/n: 9PH20S30) Item: Qty: Description: 1 2 1 x 1 x 5/8 Tee Fitting 2 2 Plastic Snap-in Hose Grommet 3 4 1-1/2" Hose Clamps

More information

Remeha. Fuel oil/gas boilers P 520. Installation and Service Manual A

Remeha. Fuel oil/gas boilers P 520. Installation and Service Manual A Remeha Fuel oil/gas boilers EN Installation and Service Manual 300016859-001-A 63115 Declaration of conformity The appliance complies with the standard model described in declaration of compliance. It

More information

INSTALLATION MANUAL Power Flued Flamefire Space Heater Co-axial Flue System

INSTALLATION MANUAL Power Flued Flamefire Space Heater Co-axial Flue System INSTALLATION MANUAL Power Flued Flamefire Space Heater Co-axial Flue System To Suit Power Flued Flamefire Models: RHFE-750ETR - ASPIRATION RHFE-752ETR RHFE-950ETR This appliance shall be installed in accordance

More information

GAS FIRED CONVECTION HEATERS WITH FAN GHIBLI SERIES Models Technical information

GAS FIRED CONVECTION HEATERS WITH FAN GHIBLI SERIES Models Technical information GAS FIRED CONVECTION HEATERS WITH FAN GHIBLI SERIES Models 4-5 - 6 This manual is divided into three sections: Technical information - SECTION 1 - GENERAL INFORMATION It contains all the information relevant

More information

Energysaver Space Heater Co-Axial Flue System Installation Manual

Energysaver Space Heater Co-Axial Flue System Installation Manual Energysaver Space Heater Co-Axial Flue System Installation Manual To Suit Models: RHFE-308FTR RHFE-309FT RHFE-556FTR RHFE-556FDT RHFE-557FTR RHFE-559FT RHFE-561FT RHFE-1004FTR RHFE-1004FDT These components

More information

EH0533 Indoor Climate Control

EH0533 Indoor Climate Control EH0533 Indoor Climate Control 2.8 kw of cooling, 2.9 kw of heating Air Conditioning Efficient heating (air-source heat-pump) Cooling Remote control Suitable for low-wall installation No external unit required

More information

LEIHDC70SC - LEIHDC70BB LEIHDC70BC. Instructions Manual.

LEIHDC70SC - LEIHDC70BB LEIHDC70BC. Instructions Manual. LEIHDC70SC - LEIHDC70BB LEIHDC70BC Instructions Manual www.rangemaster.co.uk INDEX EN RECOMMENDATIONS AND SUGGESTIONS...3 CHARACTERISTICS...4 INSTALLATION...5 USE...8 MAINTENANCE...9 2 RECOMMENDATIONS

More information

HG 675 CX 60 HG 675 CN 60 HG 675 CW 60

HG 675 CX 60 HG 675 CN 60 HG 675 CW 60 HG 675 X 60 HG 675 CX 60 HG 675 CN 60 HG 675 CW 60 1 2 1. : 93/68: 90/396: 2006/95/CE: 2004/108/CE: - 1935/2004:. 2002/95/CE: RoHS 2.,.,,,,...,. (,..)..,,.,. ( ),,, ;,,.,.....,.,,,,,,...,. (..),,.,..,.,,,,

More information

OPERATING AND INSTALLATION INSTRUCTIONS FOR WHISPAIR RANGEHOODS UTILISING ON BOARD FAN MOTOR UNITS

OPERATING AND INSTALLATION INSTRUCTIONS FOR WHISPAIR RANGEHOODS UTILISING ON BOARD FAN MOTOR UNITS A I R E N G I N E E R E D OPERATING AND INSTALLATION INSTRUCTIONS FOR WHISPAIR RANGEHOODS UTILISING ON BOARD FAN MOTOR UNITS CONGRATULATIONS Congratulations and thank you for choosing a Whispair rangehood.

More information

60cm Chimney Extractor

60cm Chimney Extractor 60cm Chimney Extractor LAM2401 HJA2480 User & Installation Guide Contents Page Environmental note 3 IMPORTANT SAFETY INFORMATION 4 6 Specifications of your extractor 7 8 Dimensions 7 Specifications 7-8

More information

SUTTON 52 CEILING FAN

SUTTON 52 CEILING FAN SUTTON 52 CEILING FAN MODELS #50188, 50189, 50190 Español p. 19 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-361-3883, Monday - Thursday,

More information

UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS

UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS: Carefully read these instructions before installing your new air-conditioner. AUSTRALIAN AUTOMOTIVE AIR AL00500054E 1 Table

More information

Rif Cod i220-0

Rif Cod i220-0 15 52 50 6 13 53 51 2 9 8 3 20 19 18 5 1 7 14 10 4 17 Rif Cod 1 0010060 2 0060287 3 0060310 4 0080003 5 0080004 6 0080051 7 0080053 8 0080410 9 0080413 10 0080430 11 0080432 12 0080434 13 0080435 14 0080436

More information

Installation Instructions EFS Hand Washing Station

Installation Instructions EFS Hand Washing Station Installation Instructions EFS Hand Washing Station Both water and soap are sequenced and dispensed from outlet. Override button allows for non potable, water-only dispensing. Lighted icons indicate the

More information

Table of Contents What to Expect with Your Installation. Tools Needed. Wall Control

Table of Contents What to Expect with Your Installation. Tools Needed. Wall Control Table of Contents Congratulations on purchasing your new Casablanca ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains

More information

60" Hatteras BayTM. Patio. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan

60 Hatteras BayTM. Patio. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan Includes our new Wall Control System 60" Hatteras BayTM Patio A Kichler Décor ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706

More information

pushing the tube into the rear of the water outlet housing with a slight twisting motion to evenly distribute the adhesive. After cleaning off any ext

pushing the tube into the rear of the water outlet housing with a slight twisting motion to evenly distribute the adhesive. After cleaning off any ext I chose an original FE expansion tank that had the filler neck on the driver's side of the tank but still had the radiator hose outlet facing the passenger side. I figured using such a tank would afford

More information

ELIX 1003 IPX4. Energy Efficient Centrifugal Fan with EC Motor Installation and Operating Instructions

ELIX 1003 IPX4. Energy Efficient Centrifugal Fan with EC Motor Installation and Operating Instructions ELIX 1003 Energy Efficient Centrifugal Fan with EC Motor Installation and Operating Instructions 3 speed continuous running SAP Appendix Q Eligible 3 models: - standard - timer - humidity control for all

More information

PowerVent. Installation manual (GB) English. Store this document in a safe place UK

PowerVent. Installation manual (GB) English. Store this document in a safe place UK PowerVent Installation manual (GB) Store this document in a safe place 959.034.03.UK GB Contents Blz Foreword 3 1. Introduction 3 2. CE declaration 4 3. SAFETY 4 3.1 General 4 3.2 Regulations 4 3.3 Precautions

More information

Cooker Hood CHIM60 CHIM70 CHIM90 CHIM101 CHIM110. Installation & User s instructions

Cooker Hood CHIM60 CHIM70 CHIM90 CHIM101 CHIM110. Installation & User s instructions Cooker Hood CHIM60 CHIM70 CHIM90 CHIM101 CHIM110 Installation & User s instructions 2 250 20.5 167.5 A 590 : 960 260 330 Max 370 E F 304 278 42 206 167 Z B C D 230 230 Fig.1 Fig.3 G E A Z Z F B Y C D 490

More information

PowerVent Installation manual. English. Store this document in a safe place EN

PowerVent Installation manual. English. Store this document in a safe place EN PowerVent - 02 Installation manual Store this document in a safe place 959.114.01.EN en Contents Page Foreword 3 1. Introduction 3 2. CE declaration 4 3. SAFETY 4 3.1 General 4 3.2 Regulations 4 3.3 Precautions

More information

TOUCHDOWN 48 CEILING FAN

TOUCHDOWN 48 CEILING FAN TOUCHDOWN 48 CEILING FAN MODEL #50205 Español p. 20 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-361-3883, Monday - Thursday, 8 am

More information

60cm Integrated Turbo Extractor

60cm Integrated Turbo Extractor 60cm Integrated Turbo Extractor LAM2201 User & Installation Guide Dear Customer, Congratulations on your choice of domestic appliance which has been designed to give you excellent service. The user manual

More information

FerronTM. Instruction Manual A Kichler Decor ceiling fan

FerronTM. Instruction Manual A Kichler Decor ceiling fan Includes our new CoolTouch TM 6 Speed DC Control System Looks permanent, but goes wherever you go! U.S. Patent Pending 300160 A Kichler Decor ceiling fan HIGH EFFICIENCY DC MOTOR FerronTM Kichler Lighting

More information

INSTALLATION MANUAL SPLIT TYPE ROOM AIR CONDITIONER (PART NO )

INSTALLATION MANUAL SPLIT TYPE ROOM AIR CONDITIONER (PART NO ) SPLIT TYPE ROOM AIR CONDITIONER INSTALLATION MANUAL (PART NO. 9312791019-01) This air conditioner uses new refrigerant HFC (R410A). The basic installation work procedures are the same as conventional refrigerant

More information

Hatteras BayTM. Patio. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S.

Hatteras BayTM. Patio. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Hatteras BayTM Patio A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go!

More information

FLANGED CORR/GUARD CORR/GUARD INSTALLATION INSTRUCTIONS

FLANGED CORR/GUARD CORR/GUARD INSTALLATION INSTRUCTIONS CORR/GUARD INSTALLATION INSTRUCTIONS This symbol on the nameplate means this product is listed by Underwriters Laboratories Inc. Tested to UL1738 / CAN / ULCS636-08 Listing No. MH26687 Testing No. 11EN

More information

Installation and Maintenance Instructions

Installation and Maintenance Instructions Installation and Maintenance Instructions Saf-T Vent Model EZ Seal and Model GC Single Wall AL 29-4C Stainless Steel Gas Vent Connector Chimney Liner & Special Gas Vent (USA) / Type BH Vent Class I/II

More information

GB162 Concentric Horizontal Vent Kit

GB162 Concentric Horizontal Vent Kit GB162 Concentric Horizontal Vent Kit FOR BUDERUS GB162 SERIES BOILERS Installation Instructions 2 Concentric Horizontal Vent Kit Installation Manual Data subject to change Bosch Thermotechnology Corp.

More information

Cooker Hood Instruction Manual

Cooker Hood Instruction Manual Cooker Hood Instruction Manual Model number(s): RHSCH601SS/B & RHSCH901SS/B IMPORTANT: RETAIN FOR FUTURE REFERENCE Contents Safety Instructions. 3-6 Product Overview. 7 Positioning. 8 Operational modes.

More information

Table of Contents What to Expect with Your Installation. Tools Needed. Wall Control

Table of Contents What to Expect with Your Installation. Tools Needed. Wall Control Table of Contents Congratulations on purchasing your new Casablanca ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL CEILING FAN OWNER'S MANUAL MODEL: Pelham HVFC# 2299 Old Bronze Satin Nickel Polished Nickel READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz. CUL LISTED MODEL: AC-554SY05-7S WEIGHT OF THE FAN:

More information

Katherm NE - Natural convection with electric heating element 2.45

Katherm NE - Natural convection with electric heating element 2.45 1.26 1.45 Katherm NE - Natural convection with electric heating element 2.45 Please retain this manual carefully for future use! Read carefully prior to commissioning! I 60/0/09/01 GB 2.45 Katherm NE -

More information

Standard Downrod for ceilings 8-10 feet high. Longer Downrod for ceilings 10 feet or higher

Standard Downrod for ceilings 8-10 feet high. Longer Downrod for ceilings 10 feet or higher Table of Contents www.casablancafanco.com To register your fan, please visit: www.casablancafanco.com/register What to Expect with Your Installation Save your receipt for proof of purchase. Ceiling Bracket??

More information

SERVICING INFORMATION

SERVICING INFORMATION SERVICING INFORMATION OPTIKINETICS SOLAR 250 (Early Type) M.Ginda 06/03/08 1 Servicing the Solar 250 effects projector. This is a short guide on how to service the main component parts of the projector.

More information

Sunburst. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan

Sunburst. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan Includes our new Wall Control System Sunburst A Kichler Décor ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30 AM

More information

INSTALLATION, INSTRUCTION AND SERVICE MANUAL

INSTALLATION, INSTRUCTION AND SERVICE MANUAL TUNGSTEN SMART-HEAT ELECTRIC HEATER BY BROMIC INSTALLATION, INSTRUCTION AND SERVICE MANUAL SUITABLE FOR ELECTRIC HEATER MODELS: TUNGSTEN 2000W, 3000W, 4000W- AND TUNGSTEN 6000W Version 1.7 USA! IMPORTANT

More information

Instructions for use and installation Cooker Hood. Istruzioni per l uso e l installazione Cappa. Mode d emploi et installation Hotte de Cuisine

Instructions for use and installation Cooker Hood. Istruzioni per l uso e l installazione Cappa. Mode d emploi et installation Hotte de Cuisine GB IT FR DE TR Instructions for use and installation Cooker Hood Istruzioni per l uso e l installazione Cappa Mode d emploi et installation Hotte de Cuisine Bedienungsanleitung und Einrichtung Dunstabzugshaube

More information

Step 1: Identify the parts of your shade (parts shown are not to scale)

Step 1: Identify the parts of your shade (parts shown are not to scale) Motor Operated Solar Shade with Valance Installation and Care Instructions Read carefully and retain for future use. Installation video is available online. Tools required: Philips head screwdriver (not

More information

Contents authorised persons

Contents authorised persons Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE 4 2. POSITIONING OF THE HOB 6 3. GAS CONNECTION 10 4. ELECTRICAL CONNECTION 11 5. ADAPTATION TO DIFFERENT TYPES OF GAS 12 6. FINAL OPERATIONS 14 7. USING

More information

INSTALLATION, INSTRUCTION AND SERVICE MANUAL

INSTALLATION, INSTRUCTION AND SERVICE MANUAL COBALT SMART-HEAT ELECTRIC HEATER BY BROMIC INSTALLATION, INSTRUCTION AND SERVICE MANUAL SUITABLE FOR ELECTRIC HEATER MODELS: COBALT 2000W, 3000W, 4000W- AND COBALT 6000W Version 1.0 USA! IMPORTANT READ

More information

AUTOMATIC GRANULAR ICE FLAKER

AUTOMATIC GRANULAR ICE FLAKER AUTOMATIC GRANULAR ICE FLAKER INSTRUCTIONS AND WARNINGS 24480 rev. 01 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on choosing a

More information

tungsten Smart-heat electric heater

tungsten Smart-heat electric heater tungsten Smart-heat electric heater BY BROMIC Installation, instruction and service manual SUITABLE FOR electric HEATER MODELS: tungsten 2000w, 3000W, 4000W- AND tungsten 6000w Version 1.5 USA! IMPORTANT

More information