USER MANUAL. Experience the gentle touch of care WITH WARRANTY CARD. Semi Automatic Washing Machine WMS76ST WMS76FT SA80CR SA80LV SA72DB SA72DR

Size: px

Start display at page:

Download "USER MANUAL. Experience the gentle touch of care WITH WARRANTY CARD. Semi Automatic Washing Machine WMS76ST WMS76FT SA80CR SA80LV SA72DB SA72DR"

Maurice Andrews
6 years ago
Views:

1 USER MANUAL WITH WARRANTY CARD Semi Automatic Washing Machine WMS76ST WMS76FT SA80CR SA80LV SA72DB SA72DR COMPLIANT Experience the gentle touch of care AN ISO 9001:2008 COMPANY

3 Dear Customer Congratulations on being the Proud owner of Intex Washing Machine. Your Washing Machine comes with a intex Guarantee of Quality. Intex takes great pride in providing its customers with perfect products that adheres to international quality standards. Intex is committed to international quality standards. Intex is committed to provide the ultimate customer satisfaction as nothing brings us greater joy than having satis ed customers of Intex. At Intex, feedback and suggestions based on your product usage experience are greatly appreciated. CONTENTS: 1. Parts Identi cation Safety Precaution Recommended Washing Procedure Laundry Guide Trouble Shoot Table Speci cation & Wiring Diagram Warranty Card Warranty Card How to avail service... 9! This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Don t put hands into the tub when it s working. The power cord of the washer is connected by Y shape. If must be replaced by the manufacturer, its service agent or similarly quali ed persons in order to avoid a hazard.

4 Turbo Dry INTRODUCTIONS OF PARTS WASHING COVER WATER SUPPLY SELECTOR OVER FLOW FILTER SPIN DRYER COVER SAFETY COVER-2 SPIN DRYER BASKET ROTATION FILTER-C CABINET PULSATOR POWER CORD off Normal Wash-Rinse Off Water Inlet Gentle Heavy Drain Regular Water Selector Wash Timer Wash Selector Wash Drain Spin Timer 2 1. Water Supply Inlet Connect here with the inlet hose from the water tap to feed water to the tub. 2. Water Selector Select WASH to supply water for washing and rinsing and SPIN for spin shower rinse. 3. Soak Timer Select the desired time for soaking washing or rinsing. 4. Wash Program Set the program to Gentle, Normal, Heavy according to kinds and quantity of the laundry. 5. Drain Selector Select Wash Rinse for washing and rinsing and Drain to drain the water out of the tub. 6. Spin Timer Select the desired time for spinning. The maximum limit is 5 min. Don t rotate the knob more than prescribed limit. * Model SA80CR/LV with Turbodry features of 10min Spin Timer Note : Graphics may be different with the actual machine. 1

5 Safety Precautions 1. Make sure that the washing machine is plugged to a 3 pin/5a electrical outlet and earth terminal is provided on the outlet. 2. Unplug the power supply cord when you do not use it. 3. To disconnect the washing machine from electrical mains completely, pull out the plug and do not pull it from the mains cord. 4. Don t allow your kids to look inside the washing machine while running. 5. This washing machine is meant for washing clothes with water as a medium. Do not use petrol or other chemicals. This can result in re and damage. 6. Do not use water with temperature exceeding 50 degree C, as this deforms the plastic parts in the machine. If you desire to use warm water add hot water to cold water in the wash Do not pour hot water in an empty tub. 7. Keep the machine away from ames and in ammable material. Do not expose the washing machine to direct sunlight or rain. Also avoid placing it in humid locations. 8. Take Precautions not to pierce the control panel membrane sheet. 9. Do not connect the earth wire to a phone wire, lightening rod. 10. Do not press the button with an awl or a pin. 11. Avoid overloading of wash and spin tub. 12. Do not use wash & spin tub for water storage. Care & Maintenance Be sure to remove the power plug from main power supply before cleaning the machine and lter Net Filter Cleaning 1. Pull out the lint lter from the lock use ngers pull out at the part of the Lint Filters side. 2. Turn the net inside out and clean with water. 3. Set back to the original position. Insert the bottom rst as shown press down and lock as the arrow. Cleaning the Wash Tub 1. After washing is complete, ll fresh water above the level of pulsator without adding clothes. 2. Run the machine for 1-2 minutes turn the knob to DRAIN position when pulsator is still rotating. 3. When water is completely drained out, turn the know to WASH position. 4. Finally turn off the machine. 2

6 Recommended washing procedure 1. Open the water tap and ll the wash tub about half way. 2. Put in the laundry detergent and allow it to disperse well. 3. Put in the clothes to be washed and add water in accordance with the amount of cloth load. 4. Set the WASH TIMER as desired depending on the fabric type and the degree of soiliage. 5. When washing is nished, set the Drain Selector to Drain NOTE: Ensure that the clothes rotate freely during wash, if not, reduce the cloth load. (By removing some clothes from the machine) Rinsing and Drying Rinsing There are 3 ways to rines: 1. Soak Rinse : Fill the wash tub appropriately for the number of clothing being washed. Set wash timer for 35 Minutes. (Soak/Rinse will begin) and clothes will Soak/Rinse for a period of 20 Minutes. 2. After 20 minutes machine will switch to wash function and clothes will be washed for 15 Minutes. A Buzzer sound shall indicate the end of the wash period. 3. Intermediate Spin Rinse: Put clothes inside the Spin Tub. Set Water Supply selected to SPIN TUB. Open the water tap and keep it open for one to two minutes and then close tap. Spin for one minute. When rinsing is over, set the Drain Selector to DRAIN. Do not keep the water tap open when the Spin tub is rotating, else machine will malfunction. SPIN DRYING Put clothes inside Spin Drum, distributing them evenly and ensure that the drain hose is lowered otherwise the machine will malfunction. After putting clothes in Spin Drum place spin Drum Cap over the clothes inside the tub to prevent them from ying out. Close the Spin Drum Lid. lf the lid is not closed the Spin Drum will not rotate. Set the SPIN TIMER from 1 to 5 minutes according to the type of clothes. lf the spin Drum starts shaking noticeably, open the lid and wait for the Spin Drum to stop spinning. Distribute the clothes evenly and re-start. * Model SA80CR/LV with Turbodry features of 10min Spin Timer REFERENCE TABLE 1. DETERGENT GUIDE WASH LOAD Water Level Amount of Detergent Amount of concentrate Detergent Amount of Softener 1.2 kg 1.2~2.5 kg Min. 25 gm 16 gm 17 ml Low Medium High Over Flow 40 gm 50 gm 60 gm 64 gm 25 gm 22 ml 2.5~3.8 kg 3.8~5.0 kg 5.0 kg or ABOVE 30 gm 26 ml 38 gm 29 ml 40 gm 35 ml 3

7 Table 2- LAUNDRY GUIDE Amount of Laundry System Clothes Synthetic Fiber Cotton Heavy Stained Clothes Less than 1.2 kg Washing Time Wash Selector 2 minutes Regular 2~5 minutes NORMAL*/ HEAVY 7~10 minutes HEAVY 1.2 ~ 2.5 kg 2.5 ~ 3.8 kg Washing Time Wash Selector Washing Time Wash Selector 2~5 minutes REGULAR 7~10 minutes REGULAR 7~10 minutes NORMAL*/ HEAVY 10~15 minutes NORMAL*/ HEAVY Minutes HEAVY #Soak 20 minutes Wash 15 minutes HEAVY 3.8 kg and above Washing Time Wash Selector Soak 20 minutes Wash 10~15 minutes REGULAR Soak 20 minutes Wash 15 minutes NORMAL*/ HEAVY #Soak 20 minutes Wash 15 minutes HEAVY Notes: If the wash load and water volume do not match, clothes may damage/water splash may occur. The quantity of wash load varies depending on fabric type, thickness and size of the clothes. Adjust the water level/wash load as required by carefully watching the movement of the clothes in the tub. Trouble shooting guide TROUBLES Motor not working CHECK POINTS Check supply source. ls the power cord rmly plugged in? ls the timer turned to a suitable point except OFF? Motor has been provided with TOP (Thermal overload protector). This will protect the motor from burning due to overheating caused by various variable factors such as overload voltage, frequency variation, etc. In such case motor supply will get off, thus stopping the motor. Wait for 1 approximate /2 hour till motor cools to normal temperature. Restart the M/c to see if motor functions normally. Spin dryer basket does not operate Drain not drawing ls there any cloth dropped between the basket and tub? ls the spin dryer cover closed? ls the laundry gathered to one side of the spin dryer basket? ls the lint stuck to the plunger valve? ls the end of the drain hose guide located at an excessive height? 4

8 Problem Reason Solution Power out or switch off Transmission belt burst Pulsator is blocked by something Switch on plug The pulsator does not rotate Trouble Shoot Table Assemble the transmission belt Remove the blockage The pulsator rotates too slowly Abnormal noise and vibration Water leaks from wash tub Belt becomes loose The exible screw of motor is loose The clothes in the spin-dry tub are unbalanced Something was stuck between pulsator and wash tub The hose is not tightened with the wash tub Tighten the belt or replace it Tighten the belt and the screw Place the clothes neatly Remove it. Tighten it Usage instructions for semi-automatic washing machine Step 1 Select the wash option (Heavy/Normal/Gentle) on the selector switch Soak/Wash: Put clothes in the wash tub with water and detergent. Start the Soak/Rinse function. For the rst 20 Minutes Soak/Rinse will work and after that clothes will be washed for the next 15 Minutes. Step 2 Place the clothes in the spin tub. Select spin timer for the time period required (For regular 5 mins / Turbodry 10mins) This is required to remove excess soap Will result in the rst drying process for the clothes. Step 3 Transfer clothes to the wash tub. Rinsing: Fill in water only and select wash time for 3-4 minutes. After this is complete, select the drain mode to drain out water Step 4 Drying : Transfer clothes to spin tub and select spin time to complete nal drying process. 5

9 SPECIFICATION Model SA72DB/DR WMS76ST/FT SA80CR/LV Max. Rated Capacity Wash 7.2 kg 7.6 kg 8.0 kg Max. Rated Capacity Spin 6.0 kg 6.0 kg 6.0 kg Power Supply Washing Input 230 V AC / 50Hz 520 W 230 V AC / 50Hz 520 W 230 V AC / 50Hz 540 W Spinning Input Net Dimension in mm (WXDXH) Package Dimension in mm (WXDXH) 190 W 805x475x x520x W 805x475x x520x W 805x475x x520x1100 Net Weight 22 kg 23 kg 24 kg Gross Weight Water Capacity High Water Capacity Low 26 kg 75 L 47 L 27 kg 75 L 47 L 29 kg 75 L 47 L Castor Buzzer Yes Yes Yes Yes Yes Yes Wash Timer 35 min. 35 min. 35 min. Soak Time 20 min. 20 min. 20 min. Spin Timer 5 min. 5 min. 10 min. WIRING DIAGRAM WIRING DIAGRAM -PT2 -PT1 Brown Gray Red Red -M1 Red Yellow -C1 Yellow Yellow Buzzer Pink -SQ White -C2 White Orange Orange Orange -XP L E N Fuse Yellow/Green E Blue Blue Brown - M2 Yellow/Green Blue Name Semi Automatic washing machine Spin-dry safety lid Inlet pipe User manual PACKING LIST 6 Quantity

10 7

11 8

12 9

13 10

14 11

Semi-Auto Washing Machine

Semi-Auto Washing Machine MWM-B1270SA(IM)070915_Layout 1 10/15/15 9:55 AM Page 1 USER MANUAL Market Expansion Services by www.dksh.com.my E-mail: electrical.appliance@dksh.com www.morgan.my facebook.com/morganappliances Semi-Auto