A WORLD OF QUALITY, SAFETY AND HYGIENE STERILCLAVE. 18 litres-bhd/b/s

Transcription

1 A WORLD OF QUALITY, SAFETY AND HYGIENE STERILCLAVE 18 litres-bhd/b/s

2 STERILCLAVE COMINOX: THE NEW GENERATION Boosting its unique and ergonomic design, Sterilclave Cominox is the la latest result of 20 years experience in the sterilisation field. The first Italian manufacturing company to manufacture and sell Type B sterilizers (since 1996), Cominox, member of the working group WG5 TC 102 of CEN (European Standardisation Committee), actually represents a clear reference for the high quality and high technological content sterilisation system market. Available in two models, 18 and 24 litres, Sterilclave Cominox, designed and manufactured in compliance with the EN standard, is an Autoclave, offering superior performances in comparison with present and specific medical market requirements. 01

3 STERILCLAVE 18: THE PRODUCT RANGE > 18 BHD An 18 litres Type B rapid autoclave, designed according to the EN standard, offering and leading through a fractioned pulsed vacuum cycle to the sterilisation of solid, hollow (type A and B) and porous loads (fabrics), both wrapped and unwrapped. What is more the unit features a process assessing system, an automatic or manual water loading procedure, a constant direct discharge, an integrated data printer (optional), the possible fitting to an external PC. Bowie & Dick Test and Vacuum Test cycles. Finally also the cycle Special destined to sterilise liquids (which is not even mentioned in the EN standard) which is accessible only through an access key. > 18 B An 18 litres Type B autoclave, designed according to the EN standard, offering and leading through fractioned pulsed vacuum cycle to the sterilisation of solid, hollow (type A and B) and porous loads (fabrics), packed and unpacked. What is more the unit features a process assessing system, the automatic (optional) or manual water loading procedure, the constant direct discharge (optional), an integrated data printer (optional), the possible fitting to an external PC. Bowie & Dick Test and Vacuum Test cycles. Finally also the cycle Special destined to sterilise liquids (which is not even mentioned in the EN standard) which is accessible only through an access key. > 18 S An 18 litres Type S autoclave, designed according to the EN standard, offering and leading through fractioned pulsed vacuum cycle to the sterilisation of solid, hollow type B and porous loads (fabrics), packed and unpacked. What is more the unit features a process assessing system, the automatic (optional) or manual water loading procedure, the constant direct discharge (optional), an integrated data printer (optional), the possible fitting to an external PC. Bowie & Dick Test and Vacuum Test cycles. Finally also the cycle Special destined to sterilise liquids (which is not even mentioned in the EN standard) which is accessible only through an access key

4 STERILCLAVE 18: CONTROL PANEL Often details make the difference. The control panel, thanks to its innovating design, allows the operator to easily and intuitively manage any Sterilclave function, reading any information relating to the programming menu or the processing cycle on the LCD. It is possible to program the water automatic loading cycle (optional on the BHD series), the self-extinction in case the unit has not been operating for more than one hour, the optional integrated printer operation. LED MAX clean water maximum level in the tank LED MIN clean water minimum level in the tank LED READY COMPLETE CYCLE it switches on at the end of the cycle when the information is displayed LED DRYING drying cycle on LED DOOR LOCKED locked door LED HEATING ON heating on DISPLAY KEY it allows to display data relating to temperature, relative pressure, complete cycle number, date and time. In the stand-by mode, it allows to program date, time, language and many other functions ON / OFF KEY unit in the stand-by mode CYCLES KEY cycle switching 121 C UNWRAPPED LOAD CYCLE LED 121 C cycle for delicate loads, mainly unwrapped 121 C POROUS / HOLLOW LOAD CYCLE LED 121 C cycle for solid, porous and delicate hollow loads, wrapped and unwrapped 134 C PRIONS POROUS/HOLLOW LOAD CYCLE LED 134 C cycle for solid, porous and hollow loads which entered in contac tiwth BSE infective agents, wrapped and unwrapped 134 C UNWRAPPED CYCLE LED 134 C cycle for solid loads, mainly unwrapped 134 C POROUS / HOLLOW CYCLE LED 134 C cycle for solid, porous and hollow loads, wrapped or unwrapped 134 C WRAPPED CYCLE LED 134 C cycle for solid loads, wrapped or unwrapped SPECIAL CYCLE LED special cycle to be programmed by the user, after using the access key BOWIE & DICK TEST LED steam penetration test LED VACUUM TEST hydraulic circuit tightness test START / STOP KEYS to start up and stop a cycle The access keys, as specified by the EN standard, allow to access programming, which is two fold protected: by means of the black key, it is possible only to select the standard sterilisation cycles while by means of the white key, it is possible to select the Special cycle too and thoroughly program any parameter. Both keys allows to reset any possible alarm. KEYS to increase or reduce the information to be programmed on the display or to scroll the menu up and down Possible socket for an external PC Detail of the ergonomic handle, perfectly fitted to the door. The unique handle movement allowing to easily opening and closing the door. The integrated printer (optional) hidden under the control panel door. JACK socket for access keys

5 Polluted water and clean water outlet discharge Automatic clean water loading and direct continuous discharge of polluted water (optional, serial fitting on the BHD models). STERILCLAVE 18: TECHNOLOGY AT THE QUALITY SERVICE Constantly looking for perfection, experience and use of quality materials allow to manufacture units whose performances are far superior than standards in terms of efficiency and life in time: as far as the sterilisation chamber is concerned (WARRANTED 10 YEARS), only stainless steel AISI 304 is used. The automated control of the saturated steam liquid phase as well as other specific technical solutions allow to cut water cosumption to the bare minimum and to get the possible highest temperature difference from one side to the other of the chamber, during the sterilisation process, lower than 0.5 C, thus avoiding any thermal shock or the use of instruments such as turbines or switches. The active door locking consists of a safety block (standard EN ) and the Stand-by chamber pre-heating is simply enforced when the door is closed for safety reasons, thus cutting even energy consumption when not required

6 STERILCLAVE 18: IDENTITY CARD SIZES A = 640 mm B = 445 mm C = 390 mm F = 520 mm (Unit door depth excluded) L = 880 mm (Unit depth with door open) CHAMBER SIZES D = 251 mm E = 330 mm SIZES TO BUILD THE UNIT IN Unit internal sizes G = 450 mm H = 395 mm F = 520 mm (Unit door depth excluded) TRAY SIZES X = 185 mm Y = 285 mm Z = 3x50 mm Opening, compulsory, on the back portion of the unit to provide for a correct ventilation (dim.440x350 mm) Sterilclave models U.M. 18S 18B 18BHD To be built-in Thermal printer at 40 columns optional optional optional Water automatic loading optional optional Continuous direct discharge optional optional Chamber capacity It 17,15 Clean water tank capacity It 2,1 Polluted water recovery tank capacity It 2,1 Water consumption per cycle (minimum) cm Water consumption per cycle (maximum) cm Maximum flow rate of (direct) discharge cm 3 /s 30 Maximum temperature of (direct) discharge C 83 Absolute operating pressure (maximum) kpa 330 Electric voltage and frequency V/Hz Volt 230 Hz 50 Admitted maximum voltage changes Volt ±10% Absorbed maximum power Watt 2000 Heat emission Joule/h 0,3 Sound pressure level detected within suitable area on the workplace db (A) <70 Weight (mass) Kg 48, Weight per support area when the reservoir is filled with water and the chamber contains a maximum load Kg/cm 2 1,16 1,19 1,2 Loading total maximum weight Unwrapped solid loads Kg 5 USEFUL LOADING SIZES WHEN THE CHAMBER IS EMPTY Ø = 226 mm P = 305 mm Ø Wrapped solid loads Kg 3 Wrapped and unwrapped hollow loads Kg 2,5 Porous loads Kg 1 1,5 1,5 Admitted room temperature C +15 C to +35 C Maximum admitted relative moist % 85% (5 to 40 C) Admitted maximum altitude m up to 1500 up to 2000 O.s.l. (fitted with a standard safety valve) O.s.l. after replacing the safety valve Standard fittings The unit was designed in compliance with the following reference standard 93 / 42 / CE Medical device class 2A directive EN13060:2004 Small steam sterilizers 89 / 336 / CE Electromagnetic compatibility directive EN Safety prescriptions for laboratory units 73 / 23 / CE Low tension directive EN Medical autoclave operating prescriptions 97 / 23 / CE Pressure equipment directive (PED) WATER SUPPLY TABLE Evaporation residues 10 mg/l Silicon dioxide SiO2 1 mg/l Iron 0,2 mg/l Cadmium 0,005 mg/l Lead 0,05 mg/l Remaining heavy metals with the exception of iron, cadmium, lead 0,1 mg/l Chlorides 2 mg/l Phosphates 0,5 mg/l Conductivity (at 20 C) 15 µs/cm Acidity value ph from 5 to 7 Appearance colourless, clean, with no sediments Hardness 0,02 mmol/l EN TYPE TESTS Air leakage (Vacuum Test) Dynamic chamber Empty chamber Solid load, unwrapped Solid load, single wrapped Solid load, double wrapped Small porous load, single wrapped Small porous load, double wrapped Full porous load, double wrapped Hollow load A (Helix Test) Hollow load B Dryness, solid load, single wrapped Dryness, solid load, double wrapped Dryness, small porous load, single wrapped Dryness, full porous load, double wrapped STERILIZATION CYCLES N S1 S2 B 121/ /134 hollow/porous 121/134 hollow/porous unwrapped wrapped 134 prions(mod.s) 134 prions(mod.b/bhd) Residual air Finishing colours are approximate being technically impossible to guarantee an absolute coincidence between the printed and the real colour. 08 Technical data which can be modified without notice. 09

7 STERILCLAVE 18: STERILISATION CYCLE DIAGRAM UNWRAPPED 18 S 18 B 18 BHD COMINOX: A COMPANY ALWAYS CARING ABOUT QUALITY Cominox is a company belonging to the IME group that since 30 years has been manufacturing electromechanical units in different application sectors. The group, divided into 4 main production plants, covers as a whole 20,000 square meters and exports 80% of its production. Located in Brianza, one of the leading industrialised areas in the North of Italy, Cominox is well-known in the world as a manufacturing company of highly technological small-sized autoclaves. Thanks to its 20 years experience in the steam sterilisation sector, and the first company in Italy applying the quality sterilisation concept to Counter autoclaves, Cominox mainly aims at designing and manufacturing highly technological products, lasting in time with a consistent quality/price ratio. Mainly the company philosophy is geared on three consistent pillars, which allowed Cominox to rank first on the Italian market (1996) in terms of offering Type B autoclaves including a mechanical pre-vacuum cycle followed by a fractioned pulsed vacuum cycle: - Innovation: Cominox is constantly looking for new technical solutions, improving any activity in the medical sector in terms of patient health-care protection and preservation against any infection transmission. Since 1996 the company actively take part in the WG5 working group of the TC 102 technical commission of the European Standardisation Committee, to better define the EN standard for small steam sterilizers. - Quality: Constant investments in terms of technology, highly qualified personnel, control equipment and more and more sophisticated testing untis allow to manufacture more and more qualified products. Cominox is certified according to EN 9001 and EN standards (company quality standard). - Service: The most complete range of Autoclaves (4 different sterilisation chambers for 10 models) for any demanding customer; periodical technical and commercial training courses, organised by Cominox, destined to dealers. HOLLOW/POROUS 18 S PRIONS 18 S WRAPPED 18 S 18 B 18 BHD 18 B 18 BHD 18 B 18 BHD

8 Authorised dealer Cominox sas Sterilitation System Via G. Viganò, Carate B.za (Mi) Italy Tel Fax PCG01018 Lug We reserve the right to modify the products without any notice.