InspirAIR Home RESIDENTIAL AIR PURIFICATION

Transcription

1 InspirAIR Home InspirAIR Home The fi rst Aldes connected solution for centralised air purifi cation which beats to the rhythm of your life. RESIDENTIAL AIR PURIFICATION

2 CONTENTS Presentation Range/Field of application Remote controls and AldesConnectTM Fitting accessories Technical/acoustic details Airflow details Installation Heart: installer interface for InspirAIR Home Premium Installer interface for InspirAIR Home Classic Thermal comfort mode operation P4 P5 P6 P7 P8 P9 P1 P11 P11 P11 cad.aldes.com * The new design, dimensioning and costing software platform for your ventilation projects. ** Tool for calculating fan energy consumption. *** The quick costing application to produce your quotations in three clicks.

3 InspirAIR Home THE CENTRALISED CONNECTED AIR PURIFICATION SOLUTION SPECIALLY DESIGNED FOR RESIDENTIAL APPLICATIONS. A centralised air purification system for houses and apartments, InspirAIR Home helps to free the incoming air from fine particles, pollutants and allergens and renew indoor air so that everyone can benefit from healthy air. More purified air With Aldes' new and exclusive filtration system, InspirAIR Home lets you filter out up to 99% of bacteria, pollen and fine particles1 PM2.5 and PM1. More control Solution connected to your Smartphone, developed exclusively by Aldes, InspirAIR Home offers you to chance to monitor and act at any time on the indoor air quality using the AldesConnect application. More intelligent design With its pure, minimalist lines, the quality of its steel finishes and its brightly- and warmly-coloured heart, InspirAIR Home has been designed to integrate with the most demanding interiors. More comfort InspirAIR Home was developed to balance your indoor air by cooling it in summer and pre-heating it in winter2 while insulating you from outside noise pollution Aldes Connect TM InspirAIR Home fitted with a bacteria filter Class obtained according to Labelling Regulation 1254/214 in local demand control mode 3 Up to 99% of pollen and fine particles 4 High-efficiency heat exchanger with energy recovery: up to 93% efficient 1 2 FILTRATION 99% HEAT EXCHANGER 93%

4 4 RESIDENTIAL AIR PURIFICATION PRESENTATION InspirAIR Home SC Classic InspirAIR Home SC Premium STANDARDS AND REGULATIONS Referenced SAP - PCDB WEEE recycling compliant PassivHaus certifi ed Constant airfl ow NF certifi cation for InspirAIR Home SC24 PEB certifi ed TüV tested

5 GENERAL PRODUCT DESCRIPTION 5 CONTENTS OF KITS FIELD OF APPLICATION Centralised connected air purification solution with heat recovery for collective housing treated individually and private houses. Renews the indoor air and filters the incoming fresh air. DESCRIPTION 2 versions: Classic or Premium. 2 configurations: right or left. 2 installations: horizontal on ceiling or vertical on wall. 3 types of control available: - constant speed, - constant airflow (self-balanced), - constant pressure (hygro-adjustable)*. 4 speeds: Holiday, Everyday, Kitchen and Guests. Connectivity: - - 1V for indoor air quality sensor (CO 2 ), - Modbus for integration in household appliances*, - Aldes IBus (for BCA Bus, Bahia Curve Bus, etc.), - AldesConnect smartphone app*. Installer control (see p. 11): - classic keyboard (InspirAIR Home SC Classic), - Heart (InspirAIR Home SC Premium). User control (accessory, not supplied): - 2-speed wired remote control (push button), - 3-speed wired remote control, - 4-speed wired multifunction remote control, - AldesConnect smartphone app*. Filtration: - at extraction: One dust filter (standard), - on fresh air: 1 pollen filter (InspirAIR Home SC Classic), 1 fine particle filter (InspirAIR Home SC Premium), 1 bacteria filter as accessory, 1 VOC filter (active carbon), Fire protection rating: M1, Material: polypropylene fibres, All Aldes exclusive filters comply with rating EN The VOC filter has been designed especially to filter the pollutants (VOC, Ozone, SOx, NOx) found in an urban environment to achieve excellent Indoor Air Quality (Standard EN 13779). - Incoming air is still filtered in bypass mode. % bypass as standard. High-yield heat exchanger and energy-efficient motor. Air duct connection: 4 x D16 mm connectors. Installation in heated area. Frost protection by balancing airflows (as standard) and pre-heating of air using the BCA Bus pre-heating coil (accessory). Designed and manufactured in France. 2-year warranty. Designation InspirAIR Home Classic RANGE InspirAIR Home Premium Codes SC / / Codes SC / / InspirAIR Home 1 1 Mounting 1 mounting kit 1 cradle + mounting kit Connector D16 ** 4 Control keypad (integrated on unit) 1 (see description) 1 (see description) Water trap 1 1 Dust filter 1 1 Pollen filter 1 ** Fine particle filter ** 1 Modem for AldesConnect app ** 1 ** component may be purchased separately (see accessories p. 7) Designation Codes InspirAIR Home SC24 Classic Right InspirAIR Home SC24 Classic Left InspirAIR Home SC24 Premium Right InspirAIR Home SC24 Premium Left InspirAIR Home SC37 Classic Right InspirAIR Home SC37 Classic Left InspirAIR Home SC37 Premium Right InspirAIR Home SC37 Premium Left * Standard on the Premium version only

6 6 RESIDENTIAL AIR PURIFICATION CONTROLS AND ALDESCONNECT AldesConnect application Multifunction remote control 4 speed wired DESCRIPTION Download on the AldesConnect GET IT ON Mobile Aldes app for Android and ios smartphone*, Control and act on the indoor air quality, adapt the air purification, monitor changes in the indoor air quality and inform (notifications on the filters and personalised advice), Functions with the Classic version with the addition of AldesConnect Box. * InspirAIR Home SC Premium version only. Remote control 3 speed wired Aldes Connect TM AldesConnect screens Remote control 2 speed wired 4-speed wired multi-function remote control LCD screen with white backlighting (6 x 6 mm), 3 control buttons, 1 home screen and 1 information screen, 4 speeds: Holiday, Everyday, Kitchen and Guests, User and installer interfaces. 3-speed wired remote control Flush-mounted remote control, Compatible with a standard electric device, 1 station, 2 control buttons and 5 LED, 3 speeds: Everyday, Kitchen and Guests, Material: White ABS, User and installer interfaces. Home screen Information screen 2-speed wired remote control Flush-mounted wired push button, Compatible with a standard electric device, 1 station, Material: White ABS, 2 speeds: Everyday and Kitchen, User interface. RANGE Designation Code 2-speed remote control - push button speed wired remote control speed wired remote control

7 ACCESSORIES 7 ACCESSORIES Product Designation Range code SC24 SC37 Characteristics Finish hatch Metal fi nish hatch and frame to conceal the product in suspended ceiling or vertical installation Distribution casing in-1 single unit distribution boxes (air supply/ recovery) for Optifl ex ducts Duct cover Decorative metal cover to be installed above or below the unit for discreet integration of ductwork Mounting cradle Standard on Premium version Calogaine seal connector D Sealed male galvanised connector D Dust filter Pollen filter Connector D16 (plastic or galvanised) PERFORMANCE OF THE FILTRATION SOLUTION EXCLUSIVE TO ALDES PM1 PM2.5 Fine particle filter POLLEN > 1 µm FINE PARTI- CLES 1 µm FINE PARTI- CLES 2.5 µm BACTERIA 1 µm Bacteria filter POLLEN FILTER FINE PARTICLE FILTER 99 % > 99% 95 % 4 % > 99% > 99% 15 % 8 % VOC filter BACTERIA FILTER > 99% > 99% > 99% > 99% * As per EN AldesConnect TM Box Connects InspirAIR Home to the AldesConnect application CO 2 sensor Controls the CO 2 level in the dwelling 23 V/24 V power supply Supplies the CO2 sensor BCA Bus BCA Bus pre-heating coil *premium only Bahia Curve terminal * Humidity-controlled kitchen exhaust outlet Non-contractual photos

8 8 RESIDENTIAL AIR PURIFICATION TECHNICAL DETAILS DIMENSIONS (MM) - WEIGHT InspirAIR Home Premium/Classic A C Distribution casing A B B B E G C D D D E F H B B A B C D E F Weight InspirAIR Home SC24 6 Ø kg InspirAIR Home SC37 67 Ø kg A B C D E For InspirAIR Home SC24 6 Ø For InspirAIR Home SC37 67 Ø ELECTRICAL DETAILS Power supply: 23 V - 5 Hz single-phase. Protection rating: IPX2, class I. Max. current Max. power InspirAIR Home - SC A 183 W InspirAIR Home - SC37 2 A 234 W ACOUSTIC DETAILS NOISE IN DUCT PRODUCT RADIATED NOISE InspirAIR Home SC24/InspirAIR Home SC37 InspirAIR Home SC24 InspirAIR Home SC7 Air supply Extract Airflow (m 3 /h) Pressure (Pa) Lw db(a)* SC24 SC37 SC24 SC37 SC24 SC Airflow (m 3 /h) Pressure (Pa) Lw db(a) Airflow (m 3 /h) Pressure (Pa) Lw db(a) *Reading taken with 1 m acoustic insulation ducting between the distribution casing and the product.

9 TECHNICAL DETAILS 9 AIRFLOW DETAILS As per EN Airflow (m 3 /h) Pressure (Pa) Efficiency InspirAIR Home SC % InspirAIR Home SC % 95 9 THERMAL EFFICIENCY InspirAirHome SC37 InspirAirHome SC24 As per EN 38 (NF) Airflow (m 3 /h) Pressure (Pa) Efficiency InspirAIR Home SC % InspirAIR Home SC % Efficiency (%) As per Passivhaus Efficiency InspirAIR Home SC24 86% InspirAIR Home SC37 87% As per SAP-PCDB InspirAIR Home SC24 K+n wet SFP (W/l/s) Efficiency SFP (W/l/s) Efficiency rooms n = % n = % % n = % % n = % % n = % - - n = % - - n = % Heat exchanger only Q (m 3 /h) Test conditions: - Outdoor air = dry air at 5 C, RH < 2% - Indoor air = dry air at 25 C, RH < 2% (EN and EN38) As per SAP-PCDB InspirAIR Home SC37 K+n wet SFP (W/l/s) Efficiency SFP (W/l/s) Efficiency rooms n = % n = %.92 91% n = % 1.4 9% n = % % n = % % n = % % n = % - - Pa Pa OVERALL GRAPHS (AIRFLOW/PRESSURE/POWER) With pollen filter (Classic) or fine particle filter (Premium) or VOC filter (Premium). InspirAIR Home SC InspirAIR Home SC24 m 3 /h With pollen filter and bacteria filter. Premium air supply Classic air supply Classic and Premium extraction Premium Power Classic Power m 3 /h Air supply Extraction Power W W Pa Pa InspirAIR Home SC37 Premium air supply Classic air supply Classic and Premium extraction Premium Power Classic Power InspirAIR Home SC37 Air supply Extraction Power m 3 /h m 3 /h W W

10 1 RESIDENTIAL AIR PURIFICATION INSTALLATION Product fixed vertically to the wall or horizontally to the ceiling, mounting flat on the ground prohibited. Fixing cradle supplied with InspirAIR Home SC Premium version. Condensate drain to connect to the D32 PVC pipework. CLEARANCE REQUIRED TO ACCESS THE HEAT EXCHANGER InspirAIR Home SC24 mm mini. mm mini. D16 connectors. The product must be installed without fail in an insulated, frost-protected room. Aldes recommends installing the product in a heated space to ensure it works to the best of its ability. RIGHT VERSION LEFT VERSION InspirAIR Home SC37 mm mini. mm mini. 64 mm 64 mm Air discharge (outdoors) 625 mm 625 mm 565 mm 565 mm Fresh air intake (outdoors) 71 mm Exhaust air (indoors) Air supply (indoors) 71 mm WALL MOUNTING EXAMPLE (VERSION InspirAIR Home SC PREMIUM) Optional cradle available for the classic version. CEILING MOUNTING EXAMPLE (VERSION InspirAIR Home SC PREMIUM)

11 TECHNICAL DETAILS 11 HEART: INSTALLER INTERFACE (PREMIUM VERSION) DESCRIPTION Graphic screen with six touch buttons and white OLED screen on black, Luminous ring. Functions accessible to the end user and the installer: Choice of language (Fr, Gb, De, Nl, It, Esp), Choice of comfort mode (automatic, priority cooling or priority heating), Choice of luminous ring mode (stand-by, pulsed in time with the ventilation or colour depending on the indoor air quality), Choice of fi lter timer (3, 6, 9 or 12 months); 9 months by default, Thermal comfort temperature adjustment, Filter clogging level display, Filter timer reinitialisation. Functions accessible to the installer (non-exhaustive): Choice of constant speed regulation mode: constant airfl ow (self-balanced), variable airfl ow based on an input - 1 V and constant pressure (hygro-adjustable), Adjustment of the airfl ow (m³/h or l/s), speed (%) or pressure (Pa) depending on the regulation mode chosen, Imbalance adjustment (air supply, recovery), Choice of timer for speeds, 2 and 3, Installation audit: displays the chosen regulation mode, the imbalance value, the fi lter clogging level, the ancillary equipment connected and also the serial number, software version, etc. Error code display. The luminous ring beats more or less quickly depending on the air renewal level. The colour of the ring changes according to the indoor air quality (when a CO 2 sensor is connected). The heart tells you when you need to change the fi lter. INSTALLER INTERFACE (CLASSIC VERSION) DESCRIPTION Keyboard with 7 buttons and a 3-fi gure LED screen, Functions: Choice of regulation mode: constant speed, constant airfl ow (self-balanced) and variable airfl ow depending on the CO 2, Adjustment of the airfl ow (m³/h) or speed (%) depending on the regulation mode chosen, Imbalance adjustment (air supply/recovery), Additional functions with the 4-speed wired multifunction remote control. THERMAL COMFORT MODE OPERATION % bypass. The bypass operates automatically according to the following graphs. If automatic mode is activated, detection of hot or cold mode is also automated via analysis of outside temperature conditions T heat exchanger incoming fresh air ( C) T heat exchanger incoming fresh air ( C) Bypass open Heat exchanger mode Bypass closed T heat exchanger incoming stale air ( C) Heat exchanger mode Bypass closed Adjustable on the Premium version and via the multi-function 4-speed wired remote control. Bypass open T heat exchanger incoming stale air ( C) Priority Heating Mode Priority x Cooling* Priority * The T C of the fresh air (coming from outside) is lower than the T C of the ambient air.

12 Find out more about the Inspir AIR Home Residential air purifi cation system, contact your Aldes sales advisor or visit aldes.com or visit With Ecofolio all paper can be recycled. InspirAir_home_Tech_Corp_En_3-1/216 - RCS Lyon Aldes reserves the right to modify its products at any time to introduce new technologies. - Photo credits Getty images