Effective Date: May Rev. 1/31/2018- Void After: May Product: Plumbing Fixtures (Stainless Steel) File No. 6088
|
|
- Anis Douglas
- 6 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: May Rev. 1/31/2018- Void After: May Marie-curie Ave. Montreal, QC H4S 2C3 Canada Identification: Each fixture shall be permanently and legibly marked with the manufacturer's name or trademark. The product shall also bear the cupc certification mark. Markings shall be applied so as to be visible after installation. Characteristics: Stainless steel plumbing fixtures may include kitchen sinks, bar sinks, and lavatories. To be installed in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 Products are in compliance with the following standard(s): ASME A /CSA B (R2013) including Update No. 2 dated March 2011
3 MODELS: Model No. KBKS001X KBKS002X KBKS003X KBKS004X KBKS005X KBKS006X KBKS007X KBKS008X KBKS009X KBKS010X KBKS011X KBKS012X KBKS013X KBKS014X KBKS015X KBKS016X KBKS017X KBKS018X KBKS019X KBKS020X KBKS021X KBKS022X KBKS023X KBKS024X KBKS025X KBKS026X KBKS027X KBKS028X KBKS029X KBKS030X KBKS031X KBKS032X KBKS033X KBKS034X KBKS035X KBKS036X KBKS037X KBKS038X KBKS039X KBKS040X KBKS041X KBKS042X KBKS043X KBKS044X KBKS045X Description Dual Bowl kitchen sink Single Bowl kitchen sink Single Bowl kitchen sink Dual Bowl kitchen sink Single Bowl Kitchen Sink Single Bowl Kitchen Sink Offset kitchen sink Offset kitchen sink Page 3 of 6
4 KBKS046X KBKS047X KBKS048X KBKS049X KBKS050X KBKS051X KBKS052X KBKS053X KBKS054X KBKS055X KBKS056X KBKS057X KBKS058X KBKS059X KBKS060X KBKS061X KBKS062X KBKS063X KBKS064X KBKS065X KBKS066X KBKS067X KBKS068X KBKS069X KBKS070X KBKS071X KBKS072X KBKS073X KBKS074 KBKS075 KBKS076 KBKS077 KBKS079 KBKS080 KBKS081 KBKS088 KBKS089 KBKS090 KBKS091 Single bowl kitchen sink Single bowl kitchen sink Dual Bowl kitchen sink Dual bowl stainless steel sink S/S Single Bowl Sink S/S Single Workcenter Sink S/S Twin Bowl Sink S/S Single Bowl Sink Stainless Steel Laundry Sink Stainless Steel Single Bowl Sink Stainless Steel Dual Bowl Sink Single Bowl Stainless Steel Utility Sink Twin Bowl Stainless Steel Sinks X Indicates the number of holes for additional components like a soap dispenser. Page 4 of 6
5 ADDITIONAL COMPANY INFO: Home Depot Glacier Bay Model No. GBWSVE001 GBWSVE0012 GBWSVE002 GBWSVE0022 GBWSVE003 GBWSVE004 GBWSVE005 GBWSVE006 GBWSVE007 GBWSVE008 GBWSVE009 GBWSVE010 GBWSVE011 GBWSVE012 GBWSVE013 GBWSVE014 GBWSVE015 GBWSRS016 GBWSVE017 GBWSVE018 GBWSVE019 GBWSVE020 GBWSVE021 GBWSVE022 GBWSVE023 GBWSVE024 GBWSVE025 GBWSVE026 GBWSVE027 GBWSVE028 GBWSVE029 GBWSVE030 GBWSVE031 GBWSVE032 GBWSVE033 GBWSVE034 GBWSVE035 GBWSVE036 GBWSVE037 Page 5 of 6
6 GBWSVE038 GBWSVE039 GBWSVE040 GBWSVE041 GBWSVE042 GBWSVE043 GBWSVE044 GBWSVE045 GBWSVE046 GBWSVE047 GBWSVE048 GBWSRS049 GBWSRS050 GBWSVE051 GBWSRS052 GBWSVE053 GBWSVE054 GBWSRS055 GBWSRS056 GBWSRS057 QCGB312108SA Westinghouse Electric Corporation Model No. WHUSR002 WHUSR003 WHUSRS001 WHUSRS004 WHUSRS005 WHUSRS006 WHUSRS007 Description Stainless Steel Single Bowl Sink Stainless Steel Dual Bowl Sink Stainless Steel Laundry Sink Single Bowl Stainless Steel Utility Sink Twin Bowl Stainless Steel Sinks Page 6 of 6
Effective Date: June 2017 Void After: June Product: Plumbing Fixture Fittings File No. 4995
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October Rev. 5/21/2018- Void After: October Product: Plumbing Fixture Fittings File No. 5840
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: January 2018 Void After: January Product: Plumbing Fixture Fittings File No. 6354
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: not available Void After: Product: Plumbing Fixture Fittings File No. 4079
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July 2017 Void After: July Product: Plumbing Fixture Fittings File No. 4472
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: December 2017 Void After: December Product: Outlet Boxes (Washing Machine) File No. 2150
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: December Rev. 3/12/2018- Void After: December Product: Lead Free Plumbing Products File No. 6661
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October 2018 Void After: October 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July Rev. 1/26/2018- Void After: July Product: Plumbing Fixture Fittings File No. 3474
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October Rev. 12/15/2017- Void After: October Product: Lead Free Plumbing Products File No. 6441
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: September 2017 Void After: September 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October 2016 Void After: October Product: Air Admittance Valves File No. C-3803
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: August Rev. 12/22/2017- Void After: August Product: Plumbing Fixture Fittings File No. 4318
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationCertificate of Compliance
Certificate of Compliance Certificate: 1852750 Master Contract: 214418 Project: 2501914 Date Issued: February 27, 2012 Issued to: 11160 Grace Ave Fountain Valley, CA 92708 USA Attention: Hiroshi Ichikawa
More informationAll sinks and lavatories shall be permanently marked to identify the
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING PLUMBING FIXTURES.
ICC-ES Report PMG-1095 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: WATER CLOSET,VITREOUS CHINA WATER CLOSET WITH DUAL FLUSH DEVICE, VITREOUS CHINA LAVATORIES, VITREOUS
More informationRECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM
RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM Customer: Ameri-Kart Corp. Class: Potable Water Holding Tanks, Waste Holding Tanks, Shower Pans, Bathtubs, Sinks Location: Cassopolis, Michigan Bristol,
More informationTrap Seal Primers and Water Hammer Arrestors TSP-2015 Go to for the most current product specification sheets.
www.mifab.com TSP-2015 Go to www.mifab.com for the most current product specification sheets. Trap Seal Primers and Water Hammer Arrestors LIT-062, Inc. 1321 West 119th Street, Chicago, Illinois 60643-5109,
More informationSummary of Substantive Changes between the 2012 and 2018 editions of ASME A /CSA B125.1 Plumbing Supply Fittings
Summary of Substantive Changes between the 2012 and 2018 editions of ASME A112.18.1/CSA B125.1 Plumbing Supply Fittings Presented to the IAPMO Standards Review Committee on May 6, 2013 General: The changes
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR EARLY-CLOSURE REPLACEMENT FLAPPERS OR EARLY-CLOSURE REPLACEMENT FLAPPER WITH MECHANICAL ASSEMBLIES IAPMO
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE
ICC-ES Report PMG-1083 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE DIVISION: 22 00 00 PLUMBING SECTION: 22 13
More informationCombined Hand-Washing Systems
IAPMO IGC 127-20142018 PUBLIC REVIEW DRAFT Combined Hand-Washing Systems IAPMO Standard IAPMO IGC 127 20142018 Published: January 2014 Previous Editions: January 2014, July 2013, April 2013, April 2009,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17065:2012
SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012 TEi-LISTING SERVICES 3455 S. 500 W. Salt Lake City, UT 84115 Mrs. Alona MacGregor (Authorized Representative) Phone: 801 262 1868 Email: alona@tei-test.com
More informationEVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING.
ICC-ES Report PMG-1367 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION AND CONTROL
More informationEffective Date: March Rev. 6/1/2018- Void After: March Product: Plumbing Fixture Fittings File No. 3109
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: PLUMBING SUPPLY FITTING
ICC-ES Report PMG-1130 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION
More informationFL-2H, FL-2L Frequency Lavatory System FL-Series
& TAS Compliant (lower or "concave" stations only) Patented Molded One-Piece Design with Integral Bowls Constructed of Terreon or Terreon RE Solid Surface Material Access Panel and Transition Cover Enclosure
More informationEVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: MECHANICAL SECTION: COMMERCIAL-KITCHEN HOODS.
ICC-ES Report PMG-1293 Reissued 12/2016 This report is subject to renewal 12/2017 EVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: 23 00 00 MECHANICAL SECTION: 23 38 13 COMMERCIAL-KITCHEN HOODS
More informationEVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS
ICC-ES Report PMG-1280 Reissued 10/2016 This report is subject to renewal 10/2017 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES SECTION: 22
More informationNavigating The Product Certification Maze: Building Codes and Product Standards. AGENDA be Covered
AGENDA be Covered Navigating The Product Certification Maze: Understanding the Product Testing & Certification Process and Certification Marks BSC Course No. 49-6664 Presenter: Lisa Reiheld, CSA Group
More informationSN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain
SN2003, SN2023, SN2004, SN2024 cupc Certified Reliable Push Button Activated Air Metering, Infrared, or TouchTime Control Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height
More informationDIMENSIONAL STANDARD FOR 1/4" QUICK CONNECT COUPLER PLUGS AND SOCKETS FOR PORTABLE PRESSURE WASHERS
PWMA PW201-2014 PWMA Standard DIMENSIONAL STANDARD FOR 1/4" QUICK CONNECT COUPLER PLUGS AND SOCKETS FOR PORTABLE PRESSURE WASHERS Pressure Washer Manufacturers Association Sponsor: 1300 Sumner Avenue Cleveland,
More informationWF2613 Classic Corner Washfountain with 9" Deep Bowl
cupc Certified Available in a 54" Bowl Size 9" Deep Bowl, Designed for Heavy Duty Hand Washing Reliable Foot, Air, TouchTime or Infrared Activations Specifications Size and Capacity Accommodates three
More informationGeo Series KPF-1702 / KPF-1750 Make a Bold Statement in Your Kitchen
Geo Series KPF-1702 / KPF-1750 Make a Bold Statement in Your Kitchen 02 KRAUS INTRODUCES NEW TWO-TONE FAUCETS Mixing it up with new materials 6/2014 Port Washington, NY Inspired by the growing trend of
More informationAustralian/New Zealand Standard
AS/NZS 4692.1:2005 (Incorporating Amendment Nos 1 and 2) Reconfirmed 2016 AS/NZS 4692.1:2005 A2 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general
More informationSN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain
SN2003, SN2023, SN2004, SN2024 cupc Certified Available with Infrared, Air or TouchTime Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height Models and Juvenile Height 54"
More informationBRADLEY CORPORATION WASH FOUNTAINS Page 1 of 8
BRADLEY WASHFOUNTAINS Bradley Corporation, a leader in the manufacture of fixtures and plumbing products, provides a variety of commercial wash fountains for every commercial and industrial need. Constructed
More informationJan05 Rev A EC
Product Specification Two Circuit Heavy Duty Burner Connector 108-1056 12Jan05 Rev A EC 0990-0059-05 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationWF3204. Extra Height 54" Terreon Semi-Circular Washfountain. Specifications
cupc Certified 3 Rim Height 9" Deep Designed for Heavy Duty Hand Washing Reliable Air, TouchTime or Infrared activations Vandal Resistant - Easy to Clean Specifications Size and Capacity 3 floor to bowl
More informationPLUMBING CODE REFERENCE Second Edition
PLUMBING CODE REFERENCE Second Edition Written by American Contractors Exam Services Published by /guides 1111135940 DeWalt Plumbing Reference_CS4.indd 1 6/25/10 10:24 AM DEWALT Plumbing Code Reference:
More informationcygnet stainless Product Catalog toll free
cygnet stainless toll free 833-231-0344 sales@cygnetstainless.com www.cygnetstainless.com p e w Product Catalog 62 Communications Drive Waynesville, NC 28786 02 Our Products With years of industry experience,
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet
More informationDesign & Construction Standards, Revised January
PART 1 GENERAL 1.01 Scope of Standard A. This standard provides general requirements of The University of Texas at Austin for fire-extinguishing systems other than water-based fire suppression systems.
More informationNEW YORK CITY FIRE DEPARTMENT. Notice of Public Hearing and Opportunity to Comment on Proposed Rule
NEW YORK CITY FIRE DEPARTMENT Notice of Public Hearing and Opportunity to Comment on Proposed Rule What are we proposing? The Fire Department is proposing to comprehensively update Section 3004-01 of Title
More informationBRADLEY CORPORATION DOMESTIC WATER PIPING SPECIALTIES Page 1 of 9
BRADLEY THERMOSTATIC MIXING VALVES Bradley Corporation, a leader in the manufacture of fixtures and plumbing products, produces four lines of thermostatic mixing valves (TMVs). Bradley Navigator High-Low
More informationThe BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES
_kitchenandaundry:pcsectione.qxd 2/6/2012 4:33 PM Page 1 The BEST Plumbing Specialties. One Source. 1 BRAIDED SUPPLY - TOILET 55513 7/8 ballcock nut x 3/8 OD comp. x 9 55510 7/8 ballcock nut x 3/8 OD comp.
More informationEVALUATION SUBJECT: FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACES AND STOVES. Report Holder:
ICC-ES Report PMG-1290 Reissued 02/2017 This report is subject to renewal 02/2018 EVALUATION SUBJECT: FIREPLACES DIVISION: 10 00 00 SPECIALTIES SECTION: 10 30 13 FIREPLACES AND STOVES Report Holder: CF+D
More informationAbu Dhabi Conformity Assessment Scheme for Fire Pumps
Abu Dhabi Conformity Assessment Scheme for Fire Pumps Assessment and Surveillance Plan Page i TABLE OF CONTENTS DEFINITIONS... 1 1 ABOUT THE ABU DHABI QUALITY AND CONFORMITY COUNCIL... 2 2 FOREWORD...
More informationMatrix of changes for the National Standard Plumbing Code July 2013
Matrix of changes for the National Standard Plumbing Code July 2013 Item # Section Number Person Submitting Change Committee Action 10-77 10.20.8 and Table 3.1.3 XI Certification 10-82 12.16 Size and Lengths
More informationMeeting the One-Cup Challenge
42 TECHNICAL SERIES HIGH PERFORMANCE HOT WATER SYSTEMS JANUARY/FEBRUARY 2010 OFFICIAL Meeting the One-Cup Challenge A SERIES ON HIGH PERFORMANCE HOT WATER SYSTEMS PART THREE: CENTRAL CORE PLUMBING About
More informationAV30 Advocate Lavatory System AV-Series
Soap, water and hand dryer, unique all-in-one patent pending design Includes infrared, high speed, dual-sided hand dryer at each hand washing station Includes large capacity, top-fill, infrared soap dispenser,
More informationA. Section Joint Sealants: Seal fixtures to walls and floors.
SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins de terrassement Champ de visibilité
More informationAV60 Advocate Lavatory System AV-Series
Soap, water and hand dryer, unique all-in-one patent pending design Includes infrared, high speed, dual-sided hand dryer at each hand washing station Includes large capacity, top-fill, infrared soap dispenser,
More informationD. Reference Standards (Utilize latest editions available):
1.01 Scope of Standard A. This standard provides general requirements of The Sam Houston State University for fireextinguishing systems other than water-based fire suppression systems. This document is
More informationSECTION CUSTOM FABRICATED FOODSERVICE EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 40 11 CUSTOM FABRICATED FOODSERVICE EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in
More informationRead Only Document Not For Distribution
Chapter 5 Traps, Cleanouts and Backwater Valves 5.1 SEPARATE TRAPS FOR EACH FIXTURE a. Plumbing fixtures shall be separately trapped by a water seal trap placed as close as possible to the fixture outlet.
More informationStainless Steel Sink Workstations
healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Stainless Steel Sink Workstations CMP has been
More informationTwo Circuit Heavy Duty Burner Connector
Product 108-1056 11 Oct.16 Rev B Specification EC 0990-0059-05 Two Circuit Heavy Duty Burner Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationElectric Tankless Water Heaters
The KwickShot Electric Tankless Water Heaters s Feature: n On Demand Hot Water No delay. n Reduced Energy Waste Flow switch activates heater only on demand (no stand-by heat loss). 99% efficient. n Continuous
More informationJune 20, 2011 PARTIES INTERESTED IN FIXED CONDENSED AEROSOL FIRE-EXTINGUISHING SYSTEMS
June 20, 2011 TO: PARTIES INTERESTED IN FIXED CONDENSED AEROSOL FIRE-EXTINGUISHING SYSTEMS SUBJECT: New Acceptance Criteria for Fixed Condensed Aerosol Fireextinguishing Systems, Subject AC432-0611-R1
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61169-2 QC 220200 Second edition 2007-02 Radio-frequency connectors Part 2: Sectional specification Radio frequency coaxial connectors of type 9,52 IEC 2007 Copyright - all rights
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods
INTERNATIONAL STANDARD ISO 14401-1 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods Engins de terrassement Champ de visibilité
More informationEVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HYDRONIC PIPING.
ICC-ES Report Reissued 08/2016 This report is subject to renewal 08/2017 EVALUATION SUBJECT: UNIPIPE PEX-AL-PEX DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: 23 21 13 HYDRONIC
More informationSS-3N Express Lavatory System SS-Series
ADA, ANSI and UFAS Compliant Serves One to Three Users at a Time Continuous owl is Constructed of Vandal Resistant Terreon or Terreon RE Solid Surface Material Available in a variety of colors Available
More informationTABLE 1. Specifications: Dimensions: 6¼ x 9 5/8 x 2 ¾
CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61169-42 Edition 1.0 2013-01 colour inside Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors IEC 61169-42:2013(E) THIS
More informationThermostatic Valve and Trim
ML8950-xx Thermostatic Valve and Trim Description Installation instructions Trim and PL8950 valve Brass lever handles and face plate Standards ASME A112.18.1 Listed IAPMO / UPC & CUPC ADA Accessibility
More informationB. Product Data: Provide manufacturers catalogue information. Indicate valve data and ratings.
DIVISION 21 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, sleeves, escutcheons, seals, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS
More informationDIMENSIONAL STANDARD FOR M22 THREAD CONNECT COUPLER RECEPTACLES AND PLUG COLLARS FOR PORTABLE PRESSURE WASHERS
PWMA PW203-2014 PWMA Standard DIMENSIONAL STANDARD FOR M22 THREAD CONNECT COUPLER RECEPTACLES AND PLUG COLLARS FOR PORTABLE PRESSURE WASHERS Pressure Washer Manufacturers Association Sponsor: 1300 Sumner
More informationWarning Genuine Counterfeit Electrical Product
Counterfeit and Non-Compliant Communications Cable Warning Genuine Counterfeit Electrical Product May be hazardous to people and property. Possible Results Include Property Damage, Electrocution, Burnt
More informationCF SERIES CF100 CF200 CF300
CF SERIES CF100 CF200 CF300 EMBALMING SINKS WALL MOUNTS W/OPTIONAL LEG SUPPORTS REFERENCE / USER MANUAL Rev 6-10-14 IMPORTANT INFORMATION MODEL NO.: SERIAL NO.: DATE OF PURCHASE: DATE OF INSTALLATION:
More informationB. Section Identification for Fire Suppression Piping and Equipment.
SECTION 211300 - FIRE SUPPRESSION SPRINKLERS PART 1 GENERAL 1.1 SECTION INCLUDES A. Dry-pipe sprinkler system. B. System design, installation, and certification. C. Fire department connections. 1.2 RELATED
More informationTDB3104. Terreon 54" Semi-Circular, Deep Bowl Washfountain
cupc Certified ADA Compliant Suitable for Heavy-Duty Hand Washing Reliable Air, TouchTime or Infrared Activations Vandal Resistant - Easy to Clean Three Different Heights (Including Juvenile and Intermediate
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61169-42 Edition 1.0 2013-01 colour inside Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors INTERNATIONAL ELECTROTECHNICAL
More informationSouth Australian Regulatory Requirements
South Australian Regulatory Requirements Australian Legislative Framework Act Act of Parliament Establishes the Law Primary legislation Regulation Subordinate legislation authorised by a specific Act Therefore
More informationFrigidaire com register to secure
Frigidaire com register to secure The Borg System is 100 % Frigidaire com register to secure Owner Support. Product Support Product Registration Parts, Service & Repair Extended Service Agreements Contact
More informationINSTALLATION MANUAL. Glass Vessel Sink. I toll free: I 2016 Kraus USA Inc.
INSTALLATION MANUAL Glass Vessel Sink www.kraususa.com I toll free: 1.800.775.0703 I 2016 Kraus USA Inc. Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus.
More informationNavigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services
Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services www.intertek.com/lighting 1 Identifying Product Safety Requirements for Your Target Markets
More informationTest Report. Appliance EMF Testing
Project: 11014506A Date: November 6, 2015 Model: 120V_WWF13NW Test Report On Appliance EMF Testing Copyright 2005 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is
More informationDirectory of Listed Products
Directory of Listed Products ELECTRICAL PRODUCTS LISTING PROGRAM Class: LED Lighting for use in Recreational Vehicles Customer: Dream Lighting Inc. Location: 631 Collins Rd, Elkhart, IN, 46516, USA Listing
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins
More informationOWNER'S, SERVICE & INSTRUCTION
OWNER'S, SERVICE & INSTRUCTION M A N U A L GAS DECK OVENS MODELS 209, 209SS X 309, 309SS 212, 212SS X 312, 312SS 215, 215SS X 315, 315SS IMPORTANT INSTRUCTIONS FOR OVEN INSTALLATION, OPERATION AND MAINTENANCE
More informationDual Tank Bicarb-Short Profile Central Mix and Delivery Installation Manual
Better Water LLC Dual Tank Bicarb-Short Profile Central Mix and Delivery rev. Jun 2017 REA 2346 Better Water LLC. All rights reserved. The content of this manual is the intellectual property of Better
More informationWF2613 Classic Corner Washfountain with 9" Deep Bowl
cupc Certified Available in a 54" Bowl Size 9" Deep Bowl, Designed for Heavy Duty Hand Washing Foot, Air Metering, Infrared or TouchTime Control Specifications Size and Capacity Accommodates three users
More informationOperation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N
Operation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N 5050-0540 TITLE PAGE General Information...3 Introduction...3 Specifications...3 Physical Parameters...3 Parts Identification...4
More informationModel RFC Series Residential Sprinklers Flat Cover Plate, Concealed Pendent Sprinkler. Product Features. Product Description
Bulletin 006 Rev. K February 2017 Model RFC Series Residential Sprinklers Flat, Concealed Pendent Sprinkler Product Features as Residential Sprinklers Push-On cover plate installation Low water flow requirements
More informationJul07 Rev C
Product Specification 108-2167 11Jul07 Rev C MPO and MPO SECURE Multimode Fiber Optic Connector and Adapter 1. SCOPE 1.1. Content This specification, which is based on GR-1435-CORE, covers the performance,
More information7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.
Rev. 1 03/05/2015 ANNEX A to the Yokogawa Corporation of America Quality Assurance Manual For Additional Requirements selectively applied to ATEX and IECEx certified products CONTENTS 1. Scope 2. Purpose
More informationSeries # 17 3-Hole Widespread Faucet with Push Drain
Installation Instructions 1-0-PC Series # 1 3-Hole Widespread Faucet with Push Drain NSF/ANSI 61 Tools You Will Need Adjustable Wrench Adjustable Pliers Teflon Tape For easy installation of your faucet
More informationCertificate of Compliance
FF0 001 Certificate of Compliance Certificate: 70116284 (LR 064969_0_00) Issued to: Mine Safety Appliances Company North American Division 1000 Cranberry Woods Dr Cranberry Township, Pennsylvania 16066-5296
More informationCentral Brass C O M P A N Y. A Division of Pioneer Industries, Inc. Installation Guide
Central Brass C O M P A N Y A Division of Pioneer Industries, Inc. Installation Guide Slow-Close Two Handle Widespread Lavatory Faucet: 3127-AN1 3127-AVN1 3127-DAN1 3127-DAVN1 This product meets the following
More informationR0 STAINLESS STEEL SINKS. Pax Zero Radius Series Handmade Stainless Steel Sinks
R0 STAINLESS STEEL SINKS Pax Zero Radius Series Handmade Stainless Steel Sinks KRAUS INTRODUCES A NEW SERIES OF ZERO-RADIUS KITCHEN SINKS Build A Better Kitchen With Restaurant-Style Stainless Steel Sinks
More informationCALL FOR FLEXIBLE SOLUTIONS SHARKBITE WATER HEATER PRODUCTS
CALL FOR FLEXIBLE SOLUTIONS SHARKBITE WATER HEATER PRODUCTS E F WATER HEATER PRODUCT SOLUTIONS Water heater systems are one of the most important components for providing comfort in homes. They are often
More informationCertificate of Compliance
FF0002 Certificate of Compliance Certificate: 2792948 Issued to: Siemens Canada Limited 1954 Technology Drive Peterborough, ON K9J 7B1 Canada Attention: Mr. Lee Rogers The products listed below are eligible
More informationGAS SAFETY Information Bulletin
GAS SAFETY Information Bulletin June 2016 G-02-13 [Rev1] Page 1 of 6 (File number 16090-G01) ENGINEERED DESIGNS FOR SITE SPECIFIC GAS-FIRED PROCESS EQUIPMENT This bulletin has been jointly developed by
More informationAustralian/New Zealand Standard
AS/NZS 4692.1:2005 AS/NZS 4692.1:2005 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general requirements AS/NZS 4692.1:2005 This Joint Australian/New
More informationPrior to Installation Unpack your new product and ensure that all the parts are contained in the packaging Keep the product in its original box until
INSTALLATION MANUAL Glass Vessel Sink www.kraususa.com I toll free: 1.800.775.0703 I 2016 Kraus USA Inc. Prior to Installation Unpack your new product and ensure that all the parts are contained in the
More informationCertificate of Compliance
FF0 001 Certificate of Compliance Certificate: 70116279 (LR 025993_0_000) Issued to: General Monitors, Incorporated 26776 Simpatica Circle Lake Forest, California 92630 USA Attention: Larry Vlagea The
More informationTankless Water Heater Kits
Tankless Water Heater Kits Now available in 2 1 6 Tankless Water Heater Service Valves Slim. Sleek. And simply smart. 5 7 BrassCraft tankless water heater service valves offer a full array of installation
More information