HEATING HEATING EQUIPMENT FOR AGRICULTURAL AND INDUSTRIAL APPLICATIONS. since

Transcription

1 HETING HETING EQUIPMENT FOR GRICULTURL ND INDUSTRIL PPLICTIONS since 1967

2 DIRECT GS-FIRED IR HETER The air heater agriterm was developed for livestock buildings. It is entirely made of stainless steel for the maximum corrosion resistance in aggressive environments. The direct fl ame guarantees maximum effi ciency: agriterm produces low emissions of Nox and Co in the atmosphere resulting in a limited environmental impact. This product can run both on LPG or natural gas. 4 secure suspension eyes included Remotable reset button Thermostat socket Practical gas/electric connections Safety thermostat with manual reset

3 Technical features Model agriterm 16 agriterm 45 agriterm 80 agriterm 100 Thermic power ir displacement Consumption at 1013 mbar/ 15 C kw kcal/h m3/h cfm LPG kg/h 1,14 3,188 5,07 7,24 Methane m3/h 1,706 4,768 6,67 9,53 LPG 30 (G30) 30 (G30) 30 (G30) 30 (G30) Gas pressure mbar 37 (G31) 37 (G31) 37 (G31) 37 (G31) Methane 20 (G20) 20 (G20) 20 (G20) 20 (G20) Emissions in the atmosphere Power supply Nox min-max ppm CO min-max ppm Voltage V 230 / 1~ 230 / 1~ 230 / 1~ 230 / 1~ Frequency* Hz Electrical power W Noise level at 1 m db * Hz version available upon request. Notes: The country of destination is to be specified for each order. The standard air heater is preset for methane consumption. In case of LPG consumption it is necessary to use the LPG kit (supplied in the same box). Dimensions and loading possibilities Model agriterm 16 agriterm 45 agriterm 80 agriterm 100 [mm] B [mm] C [mm] C B Weight [kg] Loading possibilities on pallet Model / 100 Loading possibilities Model 16 / 45 / 80 / 100 LxWxH [mm] x1000 x1800 x1000 x18 x11 x11 x1800 x18 Container 20ft 44 Pieces - N Container 40ft 100 Gross weight - kg Truck 112

4 DIRECT-FIRED GS IR HETER The air heater easyterm was developed for big structures. The double-wall housing in galvanised steel treated with zinc-magnesium guarantees high corrosion resistance and better protection of the surfaces located in very aggressive environments. Therefore it can be installed either inside or outside the building. Its installation is quick and its maintainance is easy: the inside of the machine can be conveniently inspected by opening a small door. The machine can be activated manually, by a thermostat or by an integrated control system. Tested and proven control and safety systems The centrifugal propeller guarantees a high air displacement and throw Different air inlet and outlet confi gurations, wallhousing with a special newly developed treatment for a longer lifetime in corrosive environments The insulated wallhousing prevents problems due to condensation, heat dispersion and injuries in case of accidental contact

5 Technical features and dimensions H 90 cm Technical features * Hz version available upon request. Notes: The country of destination is to be specifi ed for each order. The standard air heater is preset for methane consumption.in case of LPG consumption it is necessary to use the LPG kit (supplied in the same box). Thermic power ir displacement Gas consumption at 1013 mbar/15 C GS pressure Emissions in the atmosphere Power supply kw 74 kcal/h 63.0 m³/h cfm GPL kg/h 5,07 Methane m³/h 6,67 GPL G30 mbar 30 GPL G31 mbar 37 Methane G20 mbar 20 NOx (min-max) ppm 4-6 CO (min-max) ppm 2-8 Voltage V 230 Frequency* Hz Noise level at 1 m db 64 Electrical power W 370 Weight kg 64 Loading possibilities Loading possibilities on pallet Model Type Type B LxWxH [mm] 0x800x1420 x1420 Pieces - N 1 2 Gross weight - kg 80 1 Loading possibilities Container 20ft 23 Container 40ft 46 Truck 56

6 INDIRECT IR HETER The series combiterm represents a new generation of indirect air heaters, whose main characteristic is application versatility. The unique stainless steel combustion chamber guarantees an effi cient heat exchange between the exhaust smoke and the clean air released in the surrounding environment. The wallhousing can be accessorized with practical removable and replaceable elements, which allow the heater to be transformed from the suspended version to the wheeled or standing one; different air outlets are also available. Easy handling, transport and installation are assured by the high quality, the state-ofthe-art performances and the innovative design of the wallhousing and of the accessories. This heater can run on diesel, LPG or natural gas. IR outlet GS discharge IR intake

7 Technical features DHD Directable diffuser TEE Frontal T double outlet PHE Round hot air outlet both for direct air diffusion and canalization Standard base module SHK Practical hooks for suspended installation WSK Wheels for mobile installation KST Standing kit for installation on the fl oor Horizontal base module E xial fan, available for extra-eu countries C Centrifugal fan, recommended when air canalization is needed

8 D C D D D Technical features, dimensions and loading possibilities Model Propeller Centrifugal (C) xial (E) Thermic power Kcal/h kw , , , , , , , , , ,8 Thermic yield % 90,2 90,3 91,5 90,2 90, ,2 90,3 91,5 90,2 90,1 Oil consumption Kg/h 3 5,1 8,1 12,2 16,3 20,2 3 5,1 8,1 12,2 16,3 Methane G20 consumption m³/h 3,8 6,4 10,2 15,3 20,5 25,4 3,8 6,4 10,2 15,3 20,5 G30 consumption Kg/h 2,8 4,8 7,6 11,4 15,3 18,9 2,8 4,8 7,6 11,4 15,3 G31 consumption Kg/h 2,8 4,7 7,5 11, ,6 2,8 4,7 7,5 11,3 15 Nom. fan motor power kw 0,2 1,3 1,5 2, ,37 0,55 0,75 1,5 2,2 Propeller mm 10/10 12/9 12/12 15/15 18/13 18/18 Ø 400 Ø 4 Ø 510 Ø 610 Ø ,5 vailable air displacement (with accessory PHE) m³/h vailable static pressure Pa Thermal gradient C 36,1 29,9 32,1 35,3 37,9 36,8 30, ,3 38,6 38,3 Voltage V 230 1~N 230 1~N Frequency Hz Protection grade IP Chimney diameter mm Noise level at 7 m db () Range of application C Note: The country of destination is to be specified for each order. E E PHE B C D Weight (Kg) TEE B C D Weight (Kg) C B ØD ,5 C ØD B , E E B Model Propeller Centrifugal (C) xial (E) Length () mm Width (B) mm Height (C) mm Diameter PHE (D) mm Base (E) mm Weight Kg 103,5 147,5 225,5 2,5 323,5 385,5 94,5 128,5 201,5 235,5 288,5 Model Propeller Centrifugal (C) xial (E) Container 20ft Container 40ft Truck

9 DIRECT-DRIVEN JET-FN The jet-fan was developed to transfer the heat, produced by an external water boiler to the air passing through the special copper/aluminium exchangers. The fan can effi ciently distribute the hot air in the surrounding space both directly and through canalization. It is characterized by a sturdy steel wallhousing with two water/air heat exchangers and axial electric fan for air diffusion. F-OTB was specially developed to solve heating, ventilation, air circulation and humidity problems in agricultural and industrial environments where it is important to maintain steady conditions. FIZ impurity fi lter pair (optional) Direct driven high effi ciency fan Battery in copper/ aluminum for a higher effi ciency and longer lifetime 4 suspension eyes included

10 D Technical features Model Thermic power Kcal/kW / / / / 116 Pressure drop through radiators m/h ² O 0,25 0,86 1,16 1,25 Water flow rate (l/h) Radiators per fan n Coils per radiator n Pipes per radiator n Frontal radiator surface area dm² 30,25 30, Water pipe diameter inch" 1"/1/4 1"/1/4 1"/1/4 1"/1/2 Fan air displacement m³/h Fan revolution rpm Fan motor power kw 0,5 0,5 0,8 0,8 Voltage - Frequency* V Noise level at 5 m db () *Hz version available upon request Notes: ll data in the above chart refer to the following conditions: water inlet temperature +75 C, water outlet temperature +65 C, air inlet temperature +15 C Dimensions and loading possibilities Model [mm] B [mm] B E C [mm] D [mm] E [mm] C Weight [kg] Loading possibilities on pallet Model 5 / LxWxH [mm] 1100x1100x x8x x11x x10x12 N of pieces Gross weight - kg] Loading possibilities Model 5 / Container 20ft Container 40ft Truck 30 24

11 VERSIONS, SUPPLEMENTS ND CCESSORIES CP C90 CON TM1 TM1 Stainless steel chimney pipe, 1 mt length CP Stainless steel cap for chimney pipe C90 Stainless steel elbow 90 CON Galvanised steel roof plate for fi xing the chimney pipe to the wall or the roof of the building OI Outside air inlet vailable upon request for different models of oil and gas burners RIT RIT Stainless steel T union with inspection cover HP11W Electronic thermostat with digital display for accurate temperature control MDR-1 Mechanical thermostat, an economical solution for temperature control RPE Double stage pressure regulator for LPG gas. Pin = 0,53 1,95 bar Pout = mbar Flow rate up to 20 kg/h wide variety of applications ll data in this catalogue are indicative and are subject to change without prior notice.

12 TERMOTECNIC PERICOLI S.r.l. Regione Rapalline, lbenga, Italia tel fax PERICOLI SI PCIFIC Sdn. Bhd. 14, Jalan Sejahtera 25/124, xis Premier Industrial Park, Sec. 25, Shah lam, Selangor Malaysia tel fax pap@pericoli.com PERICOLI CENTRO MERIC rmando Birlain Shaffler, 2001 Piso 8C, Torre 1, Central Park, Col. Centro Sur 790 Queretaro Mexico tel pca@pericoli.com PERICOLI MIDDLE EST 3rd floor 16 Mahara Opposite Makka Mall, mman Jordan tel fax pme@pericoli.com are registered trademarks by Termotecnica Pericoli S.r.l. Release - June 2017