CILINDRO 40 design SLIDE Studio

Transcription

1 CILINDRO 40 design SLIDE Studio Dimensioni: Ø h 40 cm Peso: 2 Kg Imballaggio: 32 x 32 x 42 cm Volume imballaggio: 0,043 m 3 Dimensions: Ø h 40 cm Poids: 2 Kg Emballage: 32 x 32 x 42 cm Volume emballage: 0,043 m 3 Dimensions: Ø h 40 cm Weight: 2 Kg Packaging: 32 x 32 x 42 cm Packaging volume: 0,043 m 3 40 LP CIL041 LP CIE041

2 CILINDRO 80 / FLUO 80 design SLIDE Studio Dimensioni: Ø h 80 cm Peso: 5 Kg () - 3 Kg () Imballaggio: 31 x 31 x 81 cm Volume imballaggio: 0,078 m 3 Dimensions: Ø h 80 cm Poids: 5 Kg () - 3 Kg () Emballage: 31 x 31 x 81 cm Volume emballage: 0,078 m 3 Dimensions: Ø h 80 cm Weight: 5 Kg () - 3 Kg () Packaging: 31 x 31 x 81 cm Packaging volume: 0,078 m 3 80 LP CIL080 FLUO LP CIE080 CILINDRO Neon tube

3 CILINDRO 1 / FLUO 1 design SLIDE Studio Dimensioni: Ø h 1 cm Peso: 7 Kg () - 5 Kg () Imballaggio: 31 x 31 x 135 cm Volume imballaggio: 0,13 m 3 Dimensions: Ø h 1 cm Poids: 7 Kg () - 5 Kg () Emballage: 31 x 31 x 135 cm Volume emballage: 0,13 m 3 Dimensions: Ø h 1 cm Weight: 7 Kg () - 5 Kg () Packaging: 31 x 31 x 135 cm Packaging volume: 0,13 m 3 1 LP CIL1 FLUO LP CIE1 CILINDRO Neon tube

4 CILINDRO 170 / FLUO 170 design SLIDE Studio Dimensioni: Ø h 170 cm Peso: 10 Kg () - 8 Kg () Imballaggio: 31 x 31 x 175 cm Volume imballaggio: 0,168 m 3 Dimensions: Ø h 170 cm Poids: 10 Kg () - 8 Kg () Emballage: 31 x 31 x 175 cm Volume emballage: 0,168 m 3 Dimensions: Ø h 170 cm Weight: 10 Kg () - 8 Kg () Packaging: 31 x 31 x 175 cm Packaging volume: 0,168 m LP CIL170 FLUO LP CIE170 CILINDRO Neon tube

5 CILINDRO COMPONENTS BASE Material: metal. Weight: 9 Kg SD BFC050 COLOURS SILVER Ø COLOURS 12,5 EARTH SPIKE Material: metal. Weight: 0,1 Kg Note: not included. LP TUB002 Ø50 22,4 Ø3

6 SYMBOLS For indoor use. Insulation class 1. Protected against the intrusion of solid objects Ø > 12 mm, not against water. For indoor and outdoor use. Insulation class 2. Protected against the intrusion of solid objects Ø > 1 mm and splashing water. Stackable item. Conformity to the European Community instructions. European Community registered model. Insulation class 3. Device proper to direct assembly onto normally inflammable surfaces. 100% recyclable polyethylene. Protected against the intrusion of dust and water jets. Fully protected against the intrusion of dust and immersion in water. Recycling and disposal of electronic waste (WEEE). LIGHTING SYMBOLS Small lamp base for E14-14 mm light bulb. Medium lamp base for E26-26 mm light bulb. Standard lamp base for E27-27 mm light bulb. Lamp base for G13 neon tube. Lamp base for GU10 spotlight. Lamp base for G4 halogen bulb. LED technology lighting system. Neon tube lighting system. Lighting through energy saving bulb. The upper figure shows the number of allowed bulbs. Lighting through energy saving fluorescent spotlight. The upper figure shows the number of allowed spotlights. Lighting through neon tube. The upper figure shows the number of allowed neon tubes. Lighting through energy saving globe bulb. The upper figure shows the number of allowed bulbs. Lighting through flexible LED tube. Lighting through circular T9 neon tube. The upper figure shows the number of allowed neon tubes. WIRING SYMBOLS Wiring with metal clamp. protection. Diameter 11 cm. Wiring with special base for KIT LED 1,5 WATT. protection. Diameter 11,6 cm. Wiring with metal base. protection. Diameter 10 cm. Fastening by hex screw key. Wiring with plastic screw base. I3 - protection. E3 - protection. Diameter 6 cm. Wiring with metal base. protection. Diameter 20 cm. Fastening by hex screw key. Wiring with plastic screw base. I3 - protection. E3 - protection. Diameter 10 cm. Wiring with plastic base and metal inserts. I2 - protection. E2 - protection. Diameter 10 cm. Fastening by slot screwdriver. Wiring with plastic screw base. I3 - protection. E3 - protection. Diameter 15 cm. Wiring with plastic base for LED LP RGB100. IP44 protection. Diameter 10 cm. Special metal base. protection. Several sizes.

7 MATERIAL PROPERTIES Material: Linear low-density polyethylene - LLDPE. Production process: rotational moulding. Resistant to extreme temperatures (-60 C to +80 C). UV resistant (except for lighting colours). High tensile strength. WARNING Keep away from excessive heat sources. Avoid any improper use. Do not stand on the products. When the product has to be moved, lift the product off the ground in order to avoid damage. Do not overload the pot structure in order to avoid deforming. Carefully comply with the maintenance & cleaning instructions. In case of malfunctioning or damage of the wiring or any electrical parts, refer to a qualified electrician. MAINTENANCE & CLEANING To prevent dust and dirt from sticking to the plastic surfaces, periodically clean the products with a damp cloth and neutral liquid soap diluted in water. Avoid using ethanol or any liquids containing, even in small amounts, acetone, trichloroethylene or ammonia (solvents in general). It is recommended the use of SLIDE s CleanUp cleaner or a degreaser. Spray the cleaning product on the surface, rub with a damp cloth and rinse abundantly with water (preferably with a high pressure washer). In case of persistent stains use a high pressure washer or scrub eraser. The use of the scrub eraser (melamine foam - Scotch-Brite Easy Eraser or similar) is only recommended for white colour, as they are slightly abrasive. The lacquered version is also suitable for outdoor use, however it is more sensitive to scratches: periodically clean with a polish cleaner, gently rubbing with soft cloth/cotton wool. Cushions can be cleaned with a damp cloth, neutral liquid soap and water. For metal parts use specific cleaners. SUSTAINABILITY & RECYCLING All SLIDE products are 100% recyclable. Furthermore, grey, black and chocolate matt colours are produced with recycled polyethylene. SLIDE has a closed production cycle with no health prejudicial emissions and complying with ecological sustainibility rules. When a product reaches the end of its life, do not treat the product or any of its parts as domestic waste. Dispose by sending to differentiated collection centres. RESPONSIBILITY & RETURNS SLIDE declines any liability to damages caused to things or persons by an illegitimate use of the product. SLIDE won t accept any returned goods without having checked the kind of defects first. WARRANTY SLIDE products are guaranteed against all manufacturing faults, granted that the items are appropriately used, for twenty-four (24) months from the date of purchase upon presentation of the invoice. LED KITS only are guaranteed for twelve (12) months from the date of purchase. Warranty doesn t include parts that are subject to wear and tear due to usage, batteries when provided, wiring and electrical parts that do not have manufacturing faults.