Washing Machine OWNER S MANUAL. MODEL:MFW-V1100DDi

Transcription

1 Before using your washing machine, please read this manual carefully and keep it for future reference. Washing Machine OWNER S MANUAL MODEL:MFW-V1100DDi Read This Manual Inside you will find many helpful hints on how to use and maintain your washing machine properly. Just a little preventative care on your part can save you a great deal of time and money over the life of your washing machine. You'll find many answers to common problems in the chart of troubleshooting tips. If you review the chart of Troubleshooting Tips first, you may not need to call for service.

2 Contents Safety and precautions... Installation of the washer... Preparation before washing... 7 Parts identification... 8 Instruction of the washer operation panel... 9 Quick start... The main wash Other program Special features The instructions of Children-Lock function...14 How to use I-Add Add fabric care products Cleaning and Maintenance of the washing machine...16 Identify usual trouble of washer Malfunction display and solutions...18 Technical specifications...18 Safety and precautions Safety and precautions Observe the following items in order to prevent from injuring yourself, others and the damage of property: Warning Caution Please observe following contents of graphics. This indicates serious injury or death to human being may be caused. This will remind you that injury to people and damage to property may occur. This graphics represents[cause attention],and detailed cautions will be displayed inside the graphics. This graphics represents[operation prohibited], and detailed prohibitive items will be displayed inside the graphics. This graphic represents [forcible execution], and detailed forcible execution items will be displayed inside the graphics. Please do not disassembly and assembly the machine without authorization. Warning Please do not insert your hand and take out clothes inside the spin barrel before it is fully stopped. No dismantling No touching Please do not install the machine in damp and raining environment to avoid electric shocking, catching fire, faults and distortion accidents. Please do not directly rinse the machine with water when cleaning. No dampness No rinsing 1 2

3 Please do not let children climb the machine or peer into the rotating spin barrel to avoid accidents. Warning It is prohibited to wash the clothes touching with kerosene, gasoline, alcohol and other flammable materials. Please use correct power source. Caution Please do not pull out or insert the plug with wet hands to avoid electric shocking. Wet hands are prohibited Please do not damage power flexible cord and power plug to avoid electric shocking, short circuit and catching fire. Regularly clean the power plug to remove dust and dirt to avoid contact failure. Please ensure that the water inlet pipe is connected and the tap is opened before washing clothes. The water temperature shall not exceed 50 when washing with warm water. Please pull out plug from the socket if the machine is not in use. Please well connect the earth line of socket to avoid electric shocking by accidental leakage. (earthing) Customers are not allowed to change the power line without permission. It is strictly prohibited to place and sit children or lay weights on the washer. Pull out the plug Earthing Please insert the power plug tightly. Please do not place on the washer burning candle, mosquito-repellent incense, cigarette and other flammable things, as well as electric stove, air heating fan and other heating sources. Smoke and fire prohibited Please do not pull the electric cord when pulling out the plug. Please do not wash down jacket, raincoat, fishing coat and similar clothes in the washer. 3 4

4 Installation of the washer Installation of the washer Remove package Remove package and take out the bottom board of the cabinet on the foam cover. Open the lid of washer's door and take out accessories. A trial operation or washing on the foamed cushion is strictly forbidden. Installing the Anti-Rat Cover 1 Lay down the washing machine on a soft fabrics or cushion. 2 Insert the anti-rat cover to be firmly fixed from the back or front of washing machine and screw it. Installation of water inlet hose Put the water inlet pipe(which has metallic filtering bag) screw on to the tap. Tightly screw another end of water inlet hose on water inlet valve. (with rubber seal ring inside). Note: When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid breaking of water inlet valve joint. Installation of water inlet hose Clamping nut Soft fabrics Connector socket Base foamed cushion FRONT Water inlet hose Fastening screw A Installation of water inlet pipe B The connection socket consists of A and B two parts. Before installation, A and B two parts must be unscrewed to about 5mm, or directly disconnected. If the bore of water tap is larger, remove the plastic junk ring of part A. 1 5mm 4 Junk ring Connect Small ball Push down the slide jacket to expose the small ball and enable separation of connector socket from speedy connector. Unscrew four screws of part A and sleeve part A horizontally 5 over the mouth at the end of water tap (the mouth at the end of water tap must be flat and smooth. Flatten it by filing if it is not flat) and push it upward with force making the rubber washer firmly press the plane center of water tap mouth. Then tighten the screw sequentially. After that, tightly screw on part B. 6 2 Connect: Push down the slide jacket of speedy connector ( 4 small balls must be exposed ), insert it into the connection socket and then push upward Release the connection of water tap with speedy connector is completed. If it is required to feed water, simply open the water tap. Separate Separate: Close the water tap, push down the slide jacket of speedy connector and pull out the speedy connector. 3 7 Water inlet adapter The water inlet consists of connection socket and speedy connector. Speedy connector Lock nut Slide jacket Tightly screw another end of water inlet hose on water inlet valve. (with rubber seal ring inside). Note: When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid breaking of water inlet valve joint. 5 6 Water inlet hose Clamping nut

5 Preparation before washing 1Adjust the feet to level the machine 2 Install the water inlet hose. one inlet hose Parts identification Handle Top lid Water inlet valve Adjustable foot (extend when turning clockwise and shorten when turning anti clockwise ) (Slightly tilt the machine. Adjust the foot knob to ensure four corners of the machine are steadily contacted with the ground. If the ground is obviously not flat, correction should be made on the ground surface, otherwise the washer barrel will incline and knock the cabinet) two inlet hoses Liquid detergent Powder compartment Wash Spin barrel Power line Soften compartment Filter Holder Cabinet handle 3 Connect to the power source. 5 Put down the drain hose. Control panel Impeller Drain hose 4 Open the water tap. Change the direction of the drain hose 1.Lay down the washing machine on a soft fabrics or cushion. 2.To change the direction of the hose, pull out the FRONT hose and change the direction. Install the hose properly at the slot. Cabinet Accessories Adjustable foot knob 6 Put in clothes and suitable amount of washing powder. NOTICE Before washing, please do take out coins, keys and other hard goods, and pull to close the zip fastener to prevent clothes and barrel from damage. Inlet hose 1pc 7 8

6 Instruction of the washer operation panel DELAY BUTTON WASH RINSE SPIN BUTTON After choosing the washing procedure, washing time, rinsing times and spin time also have default values, You can choose any parameters according to your requirement. START PAUSE BUTTON After program selection, press the button to start wash cycle. Press this button to pause and resume the wash cycle. POWER BUTTON OPTION BUTTON WASH LEVEL BUTTON WASH SPEED/SPIN SPEED BUTTON SOFTENER BUTTON Before start, Continuous press the option button, You can choose Memory, Less Tangling, Drum Clean and Air Dry procedures. After Program Selection, Press the wash level button to Select the proper water level for wash. By pressing this button you could select wash or spin speed. Press the Softener button, the auto dosing system will take right amount of softener, At the last rinse tme. PROGRAM BUTTON Start default to the standard procedure, Before start, press the procedure button, You can choose any procedures which you want. After user press the start/pause button to start, you can also press the delay and wash button in the same time to start the childrenlock function, if you want to clear this function, you just need to press the delay and wash button in the same time again, remark: the function of the child-lock is effective only after the procedure was start. RINSE LEVEL BUTTON The rinsing water level button is alternative for users, changing the water level for rinsing, The corresponding pilot lamp is on when you choose which water level, The default rinsing water level is one gear higher than washing level except the highest water level. DETERGENT BUTTON Press the Detergent button, The auto dosing system will take right amount of detergent. You can also press the Detergent button to add more or less detergent according to the soil level 9 10

7 Quick start The main wash 1 Install the washing machine 2 Load the laundry 3 measure out the detergent 9 Press the [start/pause] key 8 Select the desired programme 7 Plug the power supply Normal program Normal program is the easiest, most convenient and most common washing program. 1.Press the power button. 2. Press the Program button to select Normal program. 3.Press the Start/Pause button. The Operation of Washing process Users can freely set up wash,rinse and spin's separate process or Process combination according to own need. The specific operation as below: The operation of one touch spin 1.Press the Power button. 2.Press the spin button to choose the spin time. 3.Press the start/pause button. Washing machine will operate the single spin process. 4 Close the machine door Programme selection The wash stops 5 Put down (hang up) the drain pipe 1 Press the POWER button. 2 Select the proper water level or other attached functions. 3 To press the start/pause key. 6 Turn on the water tap When the wash stops, the buzzer will buzz continuously for 6 times and then the power will be automatically cut off. Turn off the water tap. Although the power can be cut off automatically, the power plug must be pull out as well for the safety. The operation of single wash 1.Press the Power button. 2.First Press the spin button to make the spin parameter to return to zero, Then Press wash button to choose the wash tine. 3.Press the start/pause button. Washing machine will operate the single wash process. The operation of 'wash and rinse' 1.Press the Power button. 2.First Press the spin button to make the spin parameter to return to zero. Then Press rinse button, wash button to choose the required parameter. 3.Press the start/pause button. Washing machine will operate the 'wash and rinse' process. Any other process combinations are similar with the above NOTICE Close the lid when machine is running, otherwise, it will automatically stop working during spin process and send out abnormal warning. The washer will not work when the filled water does not reach the set water level. The selection of rinse water level: the level is equal to wash water level. Press [Rinse Level] button, the indicator light which stand for rinse level flickered. User can select the rinse water level according to needs. Rinse level exceed that wash level all the time. It shows the wash level if not press this button. And only show rinse level when rinse. After pressing down [ Power Switch ], if the [Start / Pause ] button is not pressed, the power will be automatically cut off after 10 minutes

8 Other program 1.QUICK To wash light dirty cloths with only one rinsing cycle. 2.STRONG WASHING Use this program when washing heavy duty clothes like Jeans and blanket 3.WOOL The water flow is infirmly. It is used for washing woollens, thin clothes or cleaner clothes. 4.SOAK SOAK program is with strong water flow similar to normal washing program. However, there is a motional soak process lasting about 30 minutes just before the washing process, Thus it is used for washing more dirty clothes. 5.KIDS WEAR Use this program for washing kids fabrics. 6.JEANS This program is used for washing Jeans. 7.ECO ECO is a designed program for a normally soiled load, that enables you to wash laundry effectively with less water and energy. Special features 1.MEMORY Memory procedure, It can remember all the washing parameters which users have set up, such as water lever, washing time, rinsing times etc. Memory procedure is effective after you press the start/pause button, next start when you choose the Memory procedure, You can see all the state which you choose last time. 2.LESS TANGLING This program is special designed for fabrics you don't wanna get tangled. 3.DRUM CLEAN It will be adhere to wash powder's residue inside and outside the barrel because of The pollution and the problem of the water quality. It will take smelly and the drain will not be flowing. Otherwise, the adhering residue will take off during the wash process. And the clothing will be dirty. User should clean the tub monthly. NOTICE Please do not start the program continuously. You should take few chloric bleacher to enhance the effect of tub clean. This program is used for clean the barrel and do not put the clothes in. 4.AIR DRY AIR DRY program is that the formation of the swing of the wind within the barrel through high-speed rotation, which can dry the clothes barrel, and user can select different stage you need. DELAY This washer has the functions of delay start for 24 hours. After the DELAY program start to work, the digital tube show the delay start time. And the indicator light which stand for delay lightened. When the time arrive, the indicator light which stand for delay goes out. And the indicator light which stand for remain lightened. Showing the remain time. The DELAY time stand for washing clothes after [XX] hours. The instructions of Children-Lock function When the washing machine start to wash, If a kid open the cover lid, The Buzzer will be continuous singing, Reminding user to close the cover lid. if no one to close the cover lid exceed 20 seconds, Default the kid have dropped into the tub, The washing machine will force to drain off all the water of the tub. Force to drain off water's condition: Abnormal condition. The buzzer singing, The digital window display CL, Pls check the tub. Abnormal condition's solution: when the CL alarm happens, Pls power off 5 seconds, Later you can restart(the other button is useless).pls users reset the washing parameters according requirement

9 How to use I-Add I-ADD is a Auto dosing system, it will take right amount of detergent and softener. You can also press the Detergent button to add more or less detergent according to the soil level. (I-ADD only apply to liquid detergent, softener. Don't add powder into the I-ADD boxes. ) Kind tips 1 First time use, the amount of auto-dosing maybe not sufficient. 2 It will be frozen when the temperature below 0. 3 Please add detergent and softener liquid when the ADD lights alarm. How to clean the I-Add box The detergent and softener box may get stuck,(long-time no use) You should clean the I-Add box: 1 Flush warm water into the box. 2 Press the power button to turn power on. 3 Press both the"option"and "wash speed". 4 Press "detergent" and "softener"to pump out the liquid. 5 Run a complete cycle of Drum clean to clean the drum. Don't use high foam detergent. Read the specific instructions on how to use the detergent. DO NOT EXCEED STATED DOSE, OVER. Excessive detergent will cause too much foam, will overflow from the unit, and will spend more time for rinsing. Washing powder may gather and block the box, please pay attention to Clean. Liquid detergent storage box. Open the lid, Add the liquid detergent into the Liguid Storage box slowly. Cleaning and Maintenance of the washing machine Cleaning of water inlet hose joint Unscrew and remove the water inlet hose joint from the washer and clean the filtering screen of inlet valve with brush. NOTICE Make sure to pull out the power plug before the cleaning and maintenance. Please keep the washer with neat appearance and perform correct maintenance to prolong the service life of washer. Cleaning of filtering bag The special circulation water flow is designed for this washer, thus the flock powder and flock residues will be automatically collected into the filtering bag. After application, the user shall regularly clean the filtering bag to remove the flock powder and flock residues. Detail operation methods are following: Jack Add Laundry powder in this box. Fabric softener storage box. This box not used for auto-dosing. DO NOT EXCEED STATED DOSE, OVER. Open the lid, Add the softener into the Softener Storage box slowly. Press it according to the arrowhead point. And you can discharge the frame of filtering bag. Put the frame of filtering bag into the two jacks and push into emphatically as shown in figure above

10 Identify usual trouble of washer Malfunction display and solutions If the washer can not work normally, or appear abnormal or alarms, please check and correct as follows. When the washer couldn t work well, being abnormal or in alarm, please check and correct it as follows. List of faults and inspection Faults Inspection Items Display E1 Causes Alarm for abnormal water intaking. Solutions Check the water tap is opened or not. No water flows in If the power is off or the fuse is burned out. If the water supply is cut off or the water pressure is too low. If the inlet hose is properly connected and the water tap is opened. If the filtering screen of inlet valve is blocked by dirt. If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal phenomenon when the inlet valve is switched on) If the "Start / Pause" button is pressed after the power switch is pressed. E2 E3 E4 Alarm for water drain has not finished. Alarm for lid not closed before spin. Alarm for washing stay at one side. Children-Lock Alarm if the cover lid open. Check the water level sensor and drain pump. Closed the lid. Manually balance clothes in the barrel by hands. Power off 5 seconds and Restart. No washing If the power is off or the fuse is burned out. If the power supply voltage is too low. If the water amount reaches to the required water level. (The washer will not work if the water amount does not reach the required water level) If it is set to "Delay" washing mode. (It will only start to work until the reservation time reached) F1-F8 The light of adding detergent is on Any other abnormal. 1.power off 5 seconds and Restart. 2.submit repair. Any other abnormal. 1.power off 5 seconds and Restart. 2.submit repair. Alarm if the detergent is not enough. Add liquid detergent. Abnormal draining If the water drain hose is placed very high. If the end of water drain hose is sealed in pond. If the internal rubber ring of drain valve is blocked by dirt. Technical specifications Rated power supply V~50HZ Input power of motor 390W Abnormal spin If the door lid is closed. If all clothing piled largely at one side of barrel or the clothing is excessively placed. If the washer is not placed in stable condition or it is placed in inclination state. (The ground is not flat). If the motor belt is loosened. Rated washing capacity Rated spin capacity Overall dimensions Application water pressure 10.0kg 10.0kg 580 X 640 X MPa~0.8MPa Weight of whole machine 42kg Note: During the de spin process, if washing are piled at one side of the spin barrel, it will cause unbalance of spin barrel resulting in striking. At this moment, the computer inside the washer will feel this unbalance phenomenon and will automatically correct it ( fill in water Washing ). However, if unbalance situation is not removed after continuous three corrections, which means the computer auto-correction can not resolve the problem. Then the user has to manually and evenly place the clothing inside the barrel to solve the problem. Washing mode Draining mode Spin mode New water flow Gravity drain Centrifugal spin 17 18